Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender
... More
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Feb 2025
Closing Date11 Feb 2025
Tender Amount₹ 15,17,847
Costs
EMD
₹ 30,500Document Cost
₹ 3,000Tender Fee
Refer Documents
Summary
Renovation Of Old Seed Science Building In Majhgaon Farm At Dr Ysp University Of Horticulture And Forestry Nauni Solan Sh Civil Work Including Water Supply And Sanitary Installation.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_YSPU_99201_1Bid Award Id
ViewTender No
UHF/Const/ Tenders/2022/-2397 dtt 01.02.2025Tender Authority
Dr Yashwant Singh Parmar University Of Horticulture And Forestry ViewPurchaser Address
-Website
http://http://www.yspuniversity.ac.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20 mm(twenty milimetre) nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, leveling & dressing & finishing the top smooth etc. Complete in all respect as per satisfaction of Engineer-in-Charge..
29.38
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement work up to plinth level with 1.1.5:3 (one cement : one and half sand : three stone aggregate 20 mm (Twenty milimetre) nominal size) in foundation and plinth etc. Complete in all respect as per satisfaction of Engineer-in-charge.
0.61
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement : one & half coarse sand : three graded stone aggregate 20 mm(twenty milimetre) nominal size) etc. complete in all respect as per satisfaction of Engineer-in-Charge.
9.26
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for etc. complete in all respect as per satisfaction of Engineer-in-charge.
-
-
-
... More
a). Lintels, beams, plinth beams, girders, bressurmers and cantilevers
77.12
-
-
... More
b). Suspended floors, roofs, landings, balconies and access platform.
4.91
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Thermo-Mechanically Treated bars of grade Fe-500D or more.
1184.4
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth level with Cement mortar 1:6 (one cement : six sand) complete in all respect as per satisfaction of Engineer-in-charge.
2.75
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level in all with Cement mortar 1:6 (one cement : six sand) etc. complete as per architectural drawings and directions of engineer- in-charge.
0.1
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to all floor level with Cement mortar 1:4 (one cement : four sand) etc. complete in all respect as per satisfaction of Engineer-in-charge.
48.38
-
-
... More
Brick edging 7 cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (one cement : four sand) complete in all respect as per satisfaction of Engineer-in-Charge.
48.96
-
-
... More
Coursed rubble masonry with hard stone (first or second sort) in superstructure above plinth level and upto all floor level etc. complete in all respect as per satisfaction of Engineer-in-charge.
a). Masonry work (first sort), in cement mortar 1:6 (1 cement : 6 coarse sand)
3.17
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length etc. complete in all respect as per satisfaction of Engineer-in-Charge. ( hold fast lugs or dash fastener shall be paid for separately. a).Sal wood
0.5
-
-
... More
Providing and fixing paneling or paneling and glazing in paneled or paneled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Paneling for paneled or paneled and glazed shutters 25 mm to 40 mm thick: a) 4 mm thick glass pane (weight not less than 10 kg per sqm).
3.44
-
-
... More
Providing and fixing Kiln seasoned and chemically treated hollock wood 30 mm thick. Glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge.
7.87
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
.
3.78
-
-
... More
Providing and fixing wire gauge shutters Kiln seasoned and chemically treated hollock wood using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws with 30 mm (Thirty milimetre) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size etc. complete in all respect as per satisfaction of Engineer-in-charge..
3.94
-
-
... More
Providing and fixing fly proof galvanized MS wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm etc. complete in all respect as per satisfaction of Engineer-in-charge a). Second class teak wood beading 20mm into 20 mm
2.4
-
-
... More
Providing and fixing ISI marked oxidized/ Chromium plated M.S. Sliding door bolts with nuts and screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 250x16 mm ( Two hundred fifty into sixteen milimetre)
1
-
-
... More
Providing and fixing ISI marked oxidized// Chromium plated M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge
-
-
-
... More
a). 200x10 mm( Two hundred into ten milimetre
2
-
-
... More
b). 150x10 mm( One hundred fifty into ten milimetre)
48
-
-
... More
Providing and fixing ISI marked oxidized/ chromium plated M.S. handles conforming to IS:4992 with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge a). 125mm (one hundred twenty five milimetre)
42
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer etc. complete in all respect as per satisfaction of Engineer-in-Charge.
4026.74
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using tube etc. as required. Complete in all respect as per satisfaction of Engineer-in-Charge. a).In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
700.44
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 80 x 1.25 mm M.S. laths with 1.25 mm thick top cover etc. complete in all respect as per satisfaction of Engineer-in-Charge.
19.44
-
-
... More
Providing and fixing ball bearing for rolling shutters etc. complete in all respect as per satisfaction of Engineer-in-Charge..
2
-
-
... More
40 mm (forty milimetre) thick Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20mm (twenty milimetre)nominal size finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete in all respect as per satisfaction of Engineer-in-Charge.
216.72
-
-
... More
Providing and laying jointless Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc complete in all respect as per satisfaction of Engineer-in-Charge(Kazaria / Nitco / Oreintbell / Somanymake).
3.15
-
-
... More
Providing and fixing 1st quality jointless ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size (Kazaria/ Nitco/ Orient bell/ Somany make) in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade etc. complete in all respect as per satisfaction of Engineer-in-Charge.
18.54
-
-
... More
Providing and fixing pre-coated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindal make )
352.05
-
-
... More
Providing and fixing pre-coated galvanized steel sheet Ridges plain (500 - 600mm) 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete in all respect as per satisfaction of Engineer-in-Charge.(Tata/ Jindal make )
73.72
-
-
... More
15 mm (fifteen milimetre thick) cement plaster on rough side of single or half brick wall of mix with cement mortar 1:6 (one cement: six sand) complete in all respect as per satisfaction of Engineer-in-Charge.
112.83
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/liter, of approved manufacturer, of required shade and color complete, as per manufacturer’s specification etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). Two or more coats on new work
8.1
-
-
... More
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) etc. complete in all respect as per satisfaction of Engineer-in-Charge.
30.46
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Two or more coats on new work.
461.7
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade etc. all complete as specified and as directed by the Engineer-in-Charge a)Two or more coats on new work
1.89
-
-
... More
Providing and applying white cement based putty of average thickness one mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. in all respect as per satisfaction of Engineer-in-Charge.
112.83
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of Required shade etc. in all respect as per satisfaction of Engineer-in-Charge. a). Old work (Two or more coat applied @ 1.67 ltr./ 10 Sqm) on existing cement paint surface .
220.5
-
-
... More
Distempering with 1st quality acrylic washable distemper (ready made) of Approved manufacturer and of required shade and color complete. as per Manufacturer’s specification etc. complete in all respect as per satisfaction of Engineer-in-Charge.. a) One or more coats on old work
276.02
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade etc. in all respect as per satisfaction of Engineer-in-Charge..a) One or more coats on old work
34.08
-
-
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 Sqm and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge a).With cement mortar 1:4 (one cement : four sand)
32.4
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevation area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding.
268.56
-
-
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within all leads etc. complete as per direction of Engineer - in – charge. a). Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix).
10.84
-
-
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material in all leads as per direction of Engineer-in-Charge
3.44
-
-
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material in all leads etc. complete as per direction of Engineer-in-charge. a). In cement mortar
13.97
-
-
... More
Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable Material within all lead as per direction of Engineer-in-charge a). cement mortar
3.74
-
-
... More
Taking out doors, windows and clerestory window shutters (wood or steel) including stacking in all leads etc. in all respect as per satisfaction of Engineer-in-Charge a) Of area 3 square metre and below
17
-
-
... More
Dismantling wood work in frames, trusses, purlins and rafters upto all span and height including stacking the material with in all leads and lifts as per direction of Engineer-in-charge
7.84
-
-
... More
Dismantling cement asbestos or other hard board ceiling or partition wall including stacking the serviceable material and disposal of unserviceable material with in all leads and lifts as per direction of Engineer-in-charge
108.98
-
-
... More
Providing and fixing Welded steel wire fabric of required width having rectangular mesh painted with two or more coats of enamel paint of approved shade over a coat of primer (Priming & Painting to be paid for separately) etc. complete in all respect as per satisfaction of Engineer-in-Charge.
581.49
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make). a) W.C. pan with ISI marked white solid plastic seat and lid
1
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required complete in all respect as per satisfaction of Engineer-in-Charge (Cera / Hindware make). a)White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap
1
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto one metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge.
1
-
-
... More
Providing and fixing 600x450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers etc. complete in all respect as per satisfaction of Engineer-in-Charge.
3
-
-
... More
Providing and fixing 32mm dia Semi rigid pipe P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete in all respect as per satisfaction of Engineer-in-Charge..
3
-
-
... More
Providing and fixing 15 mm nominal dia. Internal G.I. pipes (medium grade) complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. complete in all respect as per satisfaction of Engineer-in-Charge. (Jindal/ Surya make).
10
-
-
... More
Providing and fixing 20 mm (twenty milimetre) nominal bore gun metal gate valve with C.I. wheel of approved quality (screwed end) etc. complete in all respect as per satisfaction of Engineer-in-Charge.
1
-
-
... More
Providing and fixing 45 cm length and 15 mm nominal dia u-plasticized PVC connection pipe with brass unions complete in all respect as per satisfaction of Engineer-in-Charge.
2
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge (Spartan/ Seiko/ smile/ Czar make).
1
-
-
... More
Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 complete in all respect as per satisfaction of Engineer-in-Charge (Spartan/ Seiko/ smile/ Czar make).
3
-
-
... More
Cutting holes up to 30x30 cm in walls including making good the same with common burnt clay F.P.S. (non modular) bricks complete in all respect as per satisfaction of Engineer-in-Charge.
4
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one & half coarse sand (zone- III) : three graded stone aggregate 20 mm(twenty milimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm(forty milimetre) nominal size), inside plastering 12 mm thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement :two coarse sand : four graded stone aggregate 20 mm(twenty milimetre) nominal size) finished with a floating coat of neat cement complete as per standard design complete in all respect as per satisfaction of Engineer-in-Charge. a). Inside size 900x800mm and 450mm deep including 450x610mm dia opening (medium duty) SFRC Man hole cover with frame. ) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5.
2
-
-
... More
Constructing soak pit 1200 x 1200 x 1200 mm filled with brick bats including high pressure PVC pipe 110mm diameter and 1.20 meter long complete as per standard design in all respect satisfaction of Engineer-in-charge .
1
-
-
... More
Providing and fixing C.P. brass Towel rail 600x20mm size complete with C.P. Brass brackets fixed to wooden plugs with C.P. brass complete in all respect as per satisfaction of Engineer-in-charge
1
-
-
... More
Providing and fixing 100mm dia chromium plated grating of superior quality for floor, gully or nahani trap complete in all respect as per satisfaction of Engineer-in-charge.
2
-
-
... More
Providing and fixing PVC floor trap with grating ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make). a) 110mmx75mm
1
-
-
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make).
-
-
-
... More
a). 75mm (Seventy five millimetre) dia dia
4
-
-
... More
b).. 110mm (One hundred ten millimetre) dia
25
-
-
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make).
-
-
-
... More
a). 75mm (Seventy five millimetre) dia dia
5
-
-
... More
b).. 110mm (One hundred ten millimetre) dia
2
-
-
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Kisan/D-plast/Prayag make).
-
-
-
... More
a). 75mm (Seventy five millimetre) dia dia
3
-
-
... More
b).. 110mm (One hundred ten millimetre) dia
2
-
-
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawl plugs etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast/ Prayag make).
-
-
-
... More
a). 75mm (Seventy five millimetre) dia dia
3
-
-
... More
a). 75mm (Seventy five millimetre) dia dia
3
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements