Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender

Supplying, Installation, testing and commissioning of BENCHTOP FUME HOOD, Eco Panel(0.75 to 1 Hp) With TI/BI for Fumehood, LED light for 7 & 8 FT Fumehood, 3 Module Plate With Socket & Tiny Trip For Fume Hood, Apparatus Grid For Benchtop Fumehood (Epoxy), Raw Water (Flexible Tubing Service Valves for Benchtop Fumehood) (RHS), Compresses Air ( Flexible Tubing Service Valves for Benchtop Fumehood), Nitrogen (Flexible Tubing Service Valves for Benchtop Fumehood) (RHS), Ceiling Front Cover Panel For 7 Feet Fumehood, Ceiling LH/RH Side Cover Panel for Fumehood, Fixed Type Apparatus Storage Cabinet for Bench Top Fume Hood, Fixed Type Apparatus Storage Cabinet for Bench top Enhanced Fume, Rear support Panel Offixed Type Apparatus Storage Cabinet for Benchtop etc complete in all respect as per satisfaction of Engineer-in-charge/ Activity incharge. The technical specification of fume hood is also appended (Godrej/ Waldnor/ Kotterman make).

Providing and installation of emergency eye, eye/face wash, safety stations and drench hose units with spray-type outlet heads to deliver a soft, wide, high volume spray of water. Outlet heads should have an internal self-regulating flow control, a reticulated polyurethane filter, a threaded spray cover and a hinged swing-away dust cover. Hinged cover should be permanently attached to outlet head body with a stainless steel pin. All wearing components should be located inside spray head for ease of service. All emergency eye wash and shower equipment should be third-party certified to comply with ANSI Z358. 1-2009. Deck-Mounted Eye-Wash- Deck mounted drench hose units should have a single outlet head with a rubber protective collar and should deliver an aerated flow of water. The valve should be forged brass self-closing type with a stainless steel squeeze handle. Units should be furnished with a deck flange and an 8 ft. reinforced PVC hose, etc complete in all respect as per satisfaction of Engineer-in-charge ( Godrej/ Brawon/ Waldnor/ Kotterman make).

Supplying and Installation of Chemical Storage Cabinets having overall dimensions 1000mm width into 486mm depth and 1800 mm height without hose pipe. It is used for storages of corrosive chemicals and is provided with a ventilation system to enable exhaust of localized fumes emanating from the chemicals stored. The material should be 1.2 mm CRCA MS with pure Epoxy Powder coating. It must be fitted with a float glass to enable visibility inside the cabinet, etc. complete in all respect as per satisfaction of Engineer-in-charge (Godrej/ Waldnor/ Kotterman make).