Dr Yashwant Singh Parmar University Of Horticulture And Forestry Tender

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 200x10 mm ( Two hundred into ten milimetre)

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete complete in all respect as per satisfaction of Engineer-in-Charge. a)100mm(one hundred milimetre)

Providing and laying Glossy vitrified floor tiles double charge in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, (Kazaria/ Nitco/ Orient bell make), in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete complete in all respect as per satisfaction of Engineer-in-Charge. a). Size of tile 600x600mm

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (one cement: six sand) etc. complete as per architectural drawings and directions of engineer- in-charge.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete etc. in all respect as per satisfaction of Engineer-in-Charge.

Finishing walls with Acrylic Smooth exterior paint of required shade with New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within all leads etc. complete as per direction of Engineer-in-charge. a). In cement mortar

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within all leads etc. all complete as specified and as directed by the Engineer-in-Charge a). For thickness of tiles 10mm to 25mm

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chow hats, architrave, holdfasts etc. complete and stacking within all leads etc. complete in all respect as per satisfaction of Engineer-in-Charge. a) Area 3 sq. metres and below.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling,C.P. brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in charge (Jindal/ Hindalco make).(Glazing, paneling and dash fasteners to be paid for separately).

a). Anodized Aluminium (anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of grade AC 15 for fixed portion.

b). Anodized Aluminium ( anodized transparent or dyed to required shade according to IS: 1868 minimum anodic coating of grade AC 15 for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).

Providing and fixing 12mm thick prelaminated particle boardwith decorative lamination on both side flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete complete in all respect as per satisfaction of Engineer-in-Charge (Actiontesa/ Green ply make).

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. (Cost of aluminium snap beading shall be paid in basic item). a).With float glass panes of 4 mm thickness (weight not less than 10.00 kg/ Sqm).

Providing and fixing false ceiling at all heights with integral densified calciumsilicate reinforced with fibre and natural filler false ceiling tiles of Size595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991,in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides)comprising of main runners of size 24x38 mm of length 3000 mm, cross - Tof size 24x32 mm of length 1200 mm and secondary intermediate cross-T of size 24x32 mm of length 600mm to form grid module of size 600 x 600 mm ,suspended from ceiling using galvanized mild steel items (galvanizing @ 80grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x25x2 mm. Galvanized iron perimeter wall angle of size24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.

a). With 15 mm thick tegular edged light weight calcium silicate false ceiling tiles.

Providing and fixing in position wall paneling at all heights with integral dandified calcium silicate panels/tiles of size 595x 595mm, having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum).Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section (galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32 m fixed to the floor and soffit at 600mm centers using 12mm dia,50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally calcium silicate non combustible panels/tiles are to be screw fixed with self tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing calcium silicate based compound and fiber joint tape roll 50mm wide (90 metre )roll and two coats of primer suitable for paneling as per manufacturer’s specification as per direction of Engineer-in-Charge all complete. a).With 15 mm thick fully perforated square/butt edge light weight calcium silicate panels/ tiles.

Supplying, installation, testing and commissioning of Single Compact unit Virtual class room i.e. 75 Inch ultra HD Professional large format display, Digital Podium including touch screen and other, 10 x optical zoom full HD, PTZ Hybrid USB 3.0 and HDMI based video conferencing camera, 20x optical zoom 4K A.I based teacher tracking camera along with ceiling mount kit, Recording and streaming device inbuilt 10- inch Touch Display 2 HDMI video and 1 local video input, 3 KVA online UPS with 30 minutes power, Modern Smart looking benches and 1.5 Ton AC (DC inverter hot & Cold) and other required cables and accessories etc. complete in all respect as per satisfaction of Engineer-in-Charge. The detail specification of the above are as under:

a). 75- Inch Ultra HD Professional Large format display of screen size 75’’ or higher, Resolution UHD 3840 x 2160 pixels or Higher, Brightness (typical) 500 nits or Higher, Contrast ratio (typical) 5000:1 or higher, response time 4 ms or Better, Light life (typical) 50,000 hrs or higher, Smart eye protection interactive display should have smart eye protection. Glass: Hardness 4mm tempered AG Glass or Better, Anti-glare coating interactive display should have anti glare coating. Touch screen: Touch technology infrared touch, touch point 20 touch points or higher, touch response time4 ms or Better. System, CPU Quad core or Better, Memory 4GB DDR3 or Higher, Storage 32 GB or Higher and expandable up to 512 GB, OS Android 11.0 or Better. Input/ Output ports: Input ports (minimum) 3 x HDMI, 1 x VGA. 1 x Audio in, 1 x Slot-in PC(OPS) or Higher, Output Ports (minimum) 1 x Audio out or gig her, USB Ports(minimum) 4 x USB 3.0 Type A, 1 x USB 2.0 Type A, 2 x USB Type B (touch) or Higher, Communication ports(minimum) 1xRS232 In, 1 x RJ 45 Ethernet port or Better. Built in Peripherals: Speaker Stereo sound with in-built 25 watt x 2 speakers and subwoofer of 10 watt (OEM of interactive display should provide external speakers of the same make, if required, if the wattage of inbuilt speakers is less than the required wattage), Magnetic pen holder should have inbuilt magnetic pen holder with up to two pens. Tutor friendly experience should have control buttons on interactive display like Volume up/Down, Home, Back, Menu Touch on/off & Power Buttons for ease in teaching. Quiz should have in built tool to allow participants to submit answers from their smart phones (Answering/Voting/Messaging). Built in wi-fi should have inbuilt dual band wifii(2.4 & 5Ghz), Built in Hotspot should have inbuilt hotspot with internet sharing across the connected devices, built in Bluetooth should have inbuilt Bluetooth version 5.0 or latest. Stylus should have minimum 2 Nos of Stylus, Remote control should have remote control to operate the interactive display. Software: Whiteboard interactive software should have inbuilt whiteboard software for teaching/training using interactive display features like(Pen, thickness of Pen, colors of Pen, Pixels eraser and Region eraser, Shapes (circles, Triangles, rectangle, arrows), Background of white board (multiple colors also use picture, shape), Continue. next Page

Redo/Undo, Next/Previous, Select & drag option, Switching between single touch and multiple touch, Clear screen, list of pages with deleting option, switching tool bar right to left, many other tools(Compass, Protector, Insert table, calculator, curtain, timer, calendar, camera, spotlight multi screen (divide board in 2,3 and 4 parts with background color and different pen color), on screen annotations. Interactive software should be of same OEM. Interactive software of the interactive display should detect the visual Presenter/Visualizer and should be able to annotate on the image captured by the Visual Presenter / Visualizer. Wireless screen sharing interactive display should allow user to share/mirror the content of the Laptop/Desktop and mobile device(Android) wirelessly and should have screen share software to show up to 4 multiple screen at same time. Quick access tool floating tool should be available on all screen for quick access tools and same should be customized as per user requirement. Play store support should have built in Google play store to download applications direct from play store. YouTube should have built in YouTube application and should support up to 4K resolution. Inbuilt cloud drive interactive display should have inbuilt cloud drive access from Google drive and one drive. Software based video conferencing device should support software based VC with internal android platform like Google meet, Cisco WebEx, Skype, Microsoft teams & Zoom applications. Multiple controlling menu should have multi controlling menu including side menu, floating menu and pull up menu. Gesture control should have gesture control like Hold five fingers on screen for interactive display sleep mode, hold and move three fingers on screen for floating menu & swipe the screen upside for pull up menu control.et. (Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro make)- 1 No.

b) Digital Podium including touch screen of 21’’, 4K controller, Mini PC-i7, 8GB RAM, 128 GB SSD and 1 TB HDD with windows 11 and wireless keyboard and mouse, microphone system including Gooseneck microphone with phantom power, set of wireless hand held and lapel microphone with receiver. Audio System including two wall mount speakers and audio amplifier: Type/Mounting Free Standing. Construction “The Podium shall be wheel mounted capable of moving in all directions with a facility of lock them while the Electronic podium is in use. The enclosure shall be made of Polymer Powder Coated Steel body with wooden top panels. Designed to work in suitable environment conditions. The wooden top shall have lock and key and should have a sliding cover for opening/closing easily. The Podium should have housing and connectivity for visual presenter while the visualizer is in use and not in use. At the time of using the Visualizer, drawer can be opened and Visulaizer can be used. The construction of the podium should be such that while the podium is locked and not in use, there should not be any port exposed/visible on the outer body for breakage/mishandling. Display “Built-in highly sensitive interactive panel with adjustable Motorized tilt & a mechanism to make the “Panel stable so that it does not shake while writing with following minimum features-“. Screen type LED Size 53.0 cm (21 inches) or higher, Resolution 1920 x 1080 or higher, Aspect Ration 16:9/16:10, Computer interface One USB, One VGA/DVI/HDMI Port, Interactive Resolution 4000 Lpi (lines per inch), Response Time 5 ms, Viewing Angles 170(H); 160(V). Touch Finger Touch Reading accuracy + - 0.5mm (center), Tracking speed Approximately 200 points per second. “Pen Pressure sensitivity” 2048 Levels. (Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro make) - 1 No.

c) 10x Optical zoom Full HD PTZ Hybrid USB 3.0 & HDMI based video conferencing camera having sensor ½.8”, CMOS, Effective Pixel: 2.07 M, Scanning Mode Progressive, Lens f3.5 mm ~ 42.3mm, F1.8 ~ F2.8. Optical zoom 12x or higher, Digital zoom 16x or higher, Minimal Illumination 0.5 Lox @ (F1.8, AGC ON). Shutter 1/30s ~ 1/10000s, White Balance Auto, Indoor, Outdoor, One Push, Manual Backlight Compensation Support. Digital Noise Reduction 2D&3D Digital Noise Reduction, Video S/N= 55dB, Field of View 80 degrees or better. Horizontal Rotation Range +- 170 degree, Vertical rotation range Minus 30 degrees-Plus 90 degrees, Pan Speed Range 2.7 degrees~ 35 degrees per second or better, Tilt speed range 1.7 degrees~ 31 degrees per secong or better. H&V Flip Support, Image Freeze support, Number of Pre-set 255, 10 pre-sets on Remote control, Pre-Set Accuracy 0.10. Video system 1080p/60, 1080p/50, 1080p/30, 1080p/25. USB featured Operate System Windows 7, Windows 7, Windows 8, Windows 8, Windows 10, Mac OS X, Linux, Android, Color System YUY2/ H.264 / MJPEG. Video Format “YUY2 (ISOC): 1080P@60fps, H.264 AVC/SVC: 1080P@60fps, MJPEG: 1080P@60fps”, Audio on USB support. (Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro make - 1 No.

d) 20x optical zoom 4K AI Based Teacher Tracking Camera along with ceiling mount kit having sensor 1/1.8”, CMOS Sensor, Effective picture 8 Megapixels, Scanning Mode Progressive Lens f 6.25mm~125mm, Aperture (Iris) F1.58~F3.95, optical zoom 20x or higher, digital zoom 16x or higher, minimal illumination 0.5 Lux @ (F1.8 AGC), Shutter 1/30s ~ 1/10000s, Digital noise Reduction Noise Reduction 2D/3D, Flip, Mirror, Video S/N= 55dB, Angle of view 60 degrees ~ 3.5 degrees or better, horizontal rotation range + - 170 degrees or better. (Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro make - 1 No.

e) Recording and Streaming Device inbuilt 10-inch Touch display, 2 HDMI Video Input, 1 Local Video Output, Built-in 1 TB of Storage for Recording, Live stream upto 2 Channels simultaneously (face book, YouTube, etc.) having recording and streaming device, interactive panel(Size) Minimum 10” inches or more, HDMI inputs 2 x HDMI In or more, HDMI Output 1 x HDMI Out for Local Display, Audio Inputs 1 x Line In and 1 x MIC In (unbalanced), Audio Output 1 x Line Out. USB 3.0 1 x USB 3.0 ports, Storage 1 TB(Internal) or more, Video Compression H. 264 or better, Bitrates 300 Kbps to 16 Mbps or better, Resolution 1080p, 720p, 480p, 270p, User Selectable up to 1920 x 1080 p. Video Switching During live streaming and recording via the touch screen or Web UI, Video Layout PIP, POP, Single Video, Encoded Sreams 2 simultaneous 1080p streams at 30 fps (with up to Full HD Sources), Audio Encoding AAC (Sampling @48Khz) upto 320 kbps. Network 1 x 1000 Ethernet Port (RJ45), Video Format MP4, 1080p, Controls Web UI Panel, 10.1’ touches screen, RS 232 and RS 485 or more, Power Consumption Max upto 30W/2.5 Amp, Additional Component power On/Off Switch, Reset button. Operational Requirement, 10.1” Touch screen should have user friendly touch screen and web interface makes switching easy between your connected sources or layouts, Audio Support should have Face book or web browsers locally over RTMP or RTMPS Integration Device should have capability to integrate with 3rd Party central control systems etc. - 1 No.(Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro/ Sony make.

f) 3-KVA online UPS with 30 minutes Power backup. - 1 No (APC/ Nureric/ Vertiv Make)

Other Required Cables and accessories at a to f as above as per site requirement etc. complete in all respect as per satisfaction of Engineer-in-charge.

g). Modern smart look benches: i) 3 Nos. three seater front and back piece size 1690 into 1050 into 707 mm. and 13 Nos. Three seater middle piece sizes 1690 into 895 into 707 mm. Smart look benches having following specifications: Desk-Top Panel-All panels are made from 18mm thick Pre-laminated twin board (E1/P2 GRADE) with PVC edge banding on all sides. The panels have corner rounded for safety usage. Desk-Top Panel-All panels are made from 18mm thick Pre-laminated Compact Laminated Board with Decorative Paper on both sides (AS PER IS 2046: 1995) The Panels have corners rounded for safety usage. Understructure - All side metal frames and cross connectors are made from combination of 25.4 x1.2 mm thick (approx. 18 SWG) Round ERW tubes ,31.8 x 1.2 mm thick(approx. 18 SWG) Round ERW tubes and 28.6 x 1.2 mm thick(approx. 18 SWG) Round ERW tubes(As per IS:7138) which are welded together. The Welded structures and cross connectors are coated with min. 45 micron thickness of epoxy polyester coating. Back supports which are provided at the rear back are made of 50.8 x 25.4 x 1.2 mm thk(approx. 18 SWG) rectangular ERW tubes(As per IS:7138).The tubes are coated with min. 45 micron thickness of epoxy polyester coating. The storage shelves are made from 0.6 mm thick MS sheet (As per IS:513) fixed below the desk top panel and are coated with min. 45 micron thickness of epoxy polyester coating. Hooks are provided on the vertical side frames on both sides of the desk for hanging bags/bottles. They are made from 2 mm thick MS sheet(As per IS:513). and are coated with min. 45 micron thickness of epoxy polyester coating The understructure is assembled using M6 trilobular screws(As per DIN 7500)with Zn blue plating. Compact Laminate seat and back panels are assembled using M6 Counter sunk Trilobular screws(as per DIN 7500) with Zn Black Plating (As per IS 1573:1986)Spacers Are provided on th top of round tubes for wooden panels fixing. They are made of made Glass filled (30%) Plastic Caps made of PP copolymer (3530 Grade) are also provided on the rear frames adding more aesthetic value to the product.M6 high tensile TVS make bolt (Class 8.8) with glass filled nylon level adjustors are provided at the bottom of understructure to take care of unevenness in floor with height adjustment of approx 15mm complete as per layout (Godrej / Rock worth / Steel Case/ HNI make) - 01 No

h). Split air conditioner (DC inverter type Hot and Cold) 1.5 Ton with all features to be provided i.e. anti dust copper tube grooved indoor unit LED display along with four metre copper pipe with AC wire, PVC drain pipe, voltage stabilizer & stand etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Voltas/ IFB/ Blue Star/ Godrej make) - 2 Nos

Providing and fixing of Interior blind 708 grey along with channel and allied accessories etc. complete in all respect as per satisfaction of Engineer-in-Charge.

Supplying, installation, testing and commissioning of Single Compact unit Language Lab i.e. IFPD 65” (Touch): Full HD Resolution & 350 Nits Brightness with i5 Mini PC, Headphones, English, Hindi, Sanskrit, French & Spanish Languge Lab software, 6 KVA Online UPS with batteries for backup of 21 desk & 65” panel, networking, cabling & conduiting (as required), NON POE Switch 16 Port, Network Rack & extension board (power supply) as required, Student work stations & Chairs etc. complete in all respect as per satisfaction of Engineer-in-Charge. The detail specification of the above are as under:

a) IFPD 65” (Touch): Full HD Resolution & 350 Nits Brightness with i5 Mini PC of Screen size - 65" or higher. Resolution UHD 3840 × 2160 pixels or Higher. Brightness (typical) 500 nits or Higher Contrast ratio (typical) 5000:1 or Higher. Response time 4 ms or Better. Light life (typical) 50,000 hrs or Higher. Interactive display should have smart eye protection. Glass Hardness minimum 4 mm tempered AG Glass or Better. Interactive display should have Anti-glare coating. Touch technology should be Infrared touch with 20 touch points or Higher. Touch response time 4 ms or Better. System CPU Quad core 1.9 Ghz or Better. Memory 4GB DDR3/DDR4 or Higher. Storage 32GB or Higher and expandable up to 512 GB. OS Android 11.0 or Better. Input/ Output ports: Input Ports (minimum) 3 × HDMI, 1x VGA, 1x Audio in, 1 x Slot-in PC (OPS) or Higher. Output Ports (minimum) 1x Audio out or Higher. USB Ports (minimum) 4 × USB 3.0 Type A, 1 × USB 2.0 Type A, 2 × USB Type B (touch) or Higher. Communication Ports (minimum) 1x RS232 In, 1 x RJ45 ethernet port or Better. Built-in peripherals: Speaker Stereo Sound with in-built 25 Watt x 2 speakers and subwoofer of 20 watt. Should have inbuilt magnetic pen holder with up to two pens. Should have control buttons on Interactive display like Volume UP/Down, Home, Back, Menu, Touch on/off & Power Buttons for ease in teaching. Should have in built tool to allow participants to submit answers from their Smart Phones (Answering/Voting/Messaging). Should have inbuilt Dual band Wi-fi (2.4 & 5Ghz). Should have inbuilt Hotspot with internet sharing across the connected devices. Should have inbuilt Bluetooth version 5.0 or latest. Should have minimum 2 Nos of Stylus. Should have remote control to operate the Interactive display. Software: Whiteboard Interactive Software Should have inbuilt whiteboard software for teaching/ training using Interactive display with features like (Pen, thickness of pen, colours of pen, Pixels eraser and Region eraser, Shapes (Circle, Triangle, Rectangle, arrows),Background of White board (multiple colours also use picture, shape), Redo/Undo, Next/Previous, Select & Drag option, Switching between single touch Continue. next Row

and multiple touch, Clear screen, List of pages with deleting option, Switching tool bar right to left, Many other Tools (Compass, Protector, Insert Table, Calculator, Curtain, Timer, Calendar, Camera, Spotlight, Multiscreen (divide board in 2,3,and 4 parts with background colour and different pen colour), on screen annotation. Interactive software should be of the same OEM. Interactive software of the interactive Display should detect the Visual Presenter/ Visualiser and should be able to annotate on the image captured by the Visual Presenter/ Visualiser. Wireless screen sharing Interactive display should allow user to share/mirror the content of Laptop/Desktop and mobile device (Android) wirelessly and should have Screen Share software to show up to 4 Multiple screen at same time. Quick access tool Floating Tool should be available on all screens for quick access tools and same should be customized as per user requirement. Play Store Support Should have Built in Google Play store to download applications direct from Play store. YouTube should have Built in YouTube application and should support up to 4K resolution. Inbuilt Cloud drive Interactive display should have inbuild cloud drive access from Google drive & one drive. Software based Video conferencing Device should support software based VC with internal android platform like Google meet, Cisco WebEx, Skype, Microsoft teams & zoom applications. Multiple controlling menu Should have Multi Controlling menu including Side menu, floating menu and pull up menu. Gesture Control Should have gesture control like Hold five fingers on screen for Interactive display sleep mode, hold and move three fingers on screen for Floating menu & swipe the screen Upside for Pull up menu control. Split Screen Interactive display should have inbuilt split screen user should be able to split the screen to operate multitask like play a video in half of screen and open whiteboard in other half side. Smart USB Port All USB 3.0 port should support Smart USB sharing for Android, Internal PC or other External PC / Device. Multilanguage GUI Device should have GUI interface in both Hindi and English Language. Virtual Keyboard Device should have inbuilt virtual keyboard with English to Hindi writing support Continue. next Row

Enhanced Security Should have provision to lock all the USB port, Screen Lock, application lock to restrict unwanted access. Touch On/Off Button Should have provision for Touch On/Off on front of Display. Sound enhancement Should have inbuilt Volume equalizer and surround sound support to enhance the sound quality. Screen Recording Should have built in Screen recording feature supports up to full HD resolutions or better. Screen Shot Should have built-in screen shot option using single click. (Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro make - 1 No.

b) Headphones: Wired Headphones with microphone with 3.5 mm jack for students. (Intex/ Globus/ Sony/ Samsung/ Airtel Make) - 25 Nos.

c) English, Hindi, Sanskrit, French & Spanish Language Lab Software for 20+1 Users along with 2 year annual subscription having Hybrid learning Mode. Language Lab should have provision of Hybrid Learning mode so that it can be accessed within classroom or outside the campus using internet. Intercom: Two way intercom communication between teacher & student. The communication should be through text, audio & Video. Broadcast: Provision for teacher to broadcast text message to one student or to a group of selected students. Audio Supervision: Provision for teacher to listen to any students recording & check their progress. Chat: Provision for teacher to send alerts to student through text chat or Audio chat. Assignments: Provision for teacher to create assignments & broadcast to the class. Provision should be there to assign same/separate tasks to different group of students. There should also be provision to assign task to students with a start and expiry date. Reports & analysis: The teacher’s dashboard should have the following features: Detail about all the classes assigned to the teachers, Students performance report both in text as well as Graphical for various tasks assigned to various classes. Provision for generating various reports to check & analyse progress of students. The language lab software should automatically generate reports giving details about each individual learner’s activities performed in terms of no. of exercises attempted, time spent on each such activity on a day-to-day basis. Each student’s individual report should be available to the student as well as the teacher. The language lab software should also have reports that show the usage of the software by each of the instructor/faculty/teacher. - 21 Nos

d) 6 KVA Online UPS with batteries for Backup of 21 desktop & 65” panel having single phase with ground, capacity-6000 VA/4800 W. Input: Nominal Voltage-200 / 208 / 220 / 230 VAC, Input voltage range-10, Frequency Range-46 Hz ~ 54 Hz @ 50 Hz System, 56 Hz ~ 64 Hz @ 60 Hz System, Power factor : = 0.99 @ Nominal Voltage (100% Load), Output: Output Voltage-200 / 208/ 220/ 230 VAC, Voltage Regulation: +- 1%, Frequency Range (Synchronized Range) : 47~53 Hz or 57~63 Hz or 57~63 Hz, Frequency Range (Batt. Mode): 50 Hz+- 0.25 Hz or 60 Hz+-0.3 Hz. (APC/ Nureric/ Vertiv Make) - 1 No.

e) Networking, Cabling & Conduiting (as required) i.e. 4 pairs Unshielded Twisted Pair(UTP) Cable Solid Bare Copper Conductor Metal, Conductor Diameter: 0.560mm (23 AWG), Insulation: 0.970mm, Diameter in HDPE, Cable Diameter: 6mm, with PE Central Cross separator. Solution shall be provided with all cables, screws, fasteners, switch board, sockets, I/O face plates, connectors, electrical accessories, conduit, baton, flexible pipes, etc. as required for installation & optimum functioning of the Digital Lab. - 21 Nos.

f) NON POE Switch 16 port 10/100MBPS, RJ45 Ports Auto Negotiation, Auto MDI/MDIX eliminates the need for croosover cables, Switching Capacity 4.8 Gobsmacked forwarding rate 3.57 MBPS, MAC address Table:8k, Jumbo frame 2 KB, Green Technology: Yes; Standards and Protocols: IEEE 802.3x. - 2 Nos.

g) Network Rack & Extension board (Power Supply): 19’” Wall mount 6u rack, 400 mm depth, single section with front toughened glass door, strong steel end, frame embedded at top and bottom with cable entry provisions, with lock & key, PDU 19” horizontal 6 way, Universal socket 5 amp with on/off switch and indicator and 2.5 mtr cable and 3 pin plug. - 1 No.

h) Student Workstation: Supplying & placing single sharing table in completely knock down conditions with an overall size 800mm x 450mm x 1050 mm that is to be assembled at site. The worktop shall be made up of 25mm thick pre-laminated particle board of grade II of IS 12823 with approved laminate and finish as per approved shade. Continue. next row

The table top profile shall be in rectangle shape and the edges shall be sealed with 2 mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degrees Celsius. The table top shall be supported on 18 mm thick Prelam Particle board gabel end with edges shall be sealed with 2mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degrees Celsius. A pullout keyboard trey shall be provided of 18mm thck Pre-laminated particle board. The tray shall be operated on keyboard channel. The table shall be clad with modesty panel which provide structural support for the table. It should be 18 mm thick Prelam particle board with 2 mm thick thin strip of impermeable PVC that is cut to fit the size of board panel and duly pasted with the assistance of edge banding machine at 200 degree Celsius. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. Wire carrier shall be made in 0.7mm thick metal sheet with 50 micron powder coated. Size shall be of wire carrier W 670 X D 140mm. The Chair shall be tested for BIFMA 5.1 standard from the BIFMA approved laboratory and the test report must be uploaded along with technical bid. The OEM of the product must be having ISO 9001:2015, ISO 45001:2018 certification issued by a verified issuing agency by NABCB/IAF ( Globus infocom/ Godrej/ Space wood make). - 20 Nos

i). Student chair having seat size shall be 450+- 10mm width X 440 +-10mm depth and back size shall be 430+-10 width X 410 +- 10mm height & overall height 960+-10mm. The seat and back shall be made of 15 mm thick hot pressed commercial plywood padded with HR moulded PU foam 50mm thick having density 40kg/m3 in seat and 40 mm thick having density 32 Kg/m3 in back. It should be upholstered with fabric tapestry 1mm thick and 300 GSM. The backrest of the chair should be natural curvature of the spine to provide back support. The seat and back shall be arrested together with 50-60 u thick powder coated HR steel spine and the armrest shall be used black integral polypropylene arm completely joint with seat. Continue next Page

The frame structure shall be cantilever support type made up of MS/CRCA powder coated round pipe of Dia 25mm with 2mm thickness. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The chair shall be tested for BIFMA 5.1 standard from the BIFMA approved laboratory and the test report must be uploaded along with technical bid. The OEM of the product must be having ISO 9001:2015, ISO 45001:2018 certification issued by a verified issuing agency by NABCB/IAF. ( Globus infocom / Godrej/ Spacewood make). - 20 Nos

Supplying, installation, testing and commissioning of Single Compact unit ICT lab. i.e. 75 Inch ultra HD Professional large format display, Digital Podium including touch screen and other, Modular workstation with partition, Student chairs and 1.5 Ton AC (DC inverter) along with electrical wiring as per lab layout with allied accessories as required etc. complete in all respect as per satisfaction of Engineer-in-Charge. The detail specification of the above are as under:

a). 75- Inch Ultra HD Professional Large format display of screen size 75’’ or higher, Resolution UHD 3840 x 2160 pixels or Higher, Brightness (typical) 500 nits or Higher, Contrast ratio (typical) 5000:1 or higher, response time 4 ms or Better, Light life (typical) 50,000 hrs or higher, Smart eye protection interactive display should have smart eye protection. Glass: Hardness 4mm tempered AG Glass or Better, Anti-glare coating interactive display should have anti glare coating. Touch screen: Touch technology infrared touch, touch point 20 touch points or higher, touch response time4 ms or Better. System, CPU Quad core or Better, Memory 4GB DDR3 or Higher, Storage 32 GB or Higher and expandable up to 512 GB, OS Android 11.0 or Better. Input/ Output ports: Input ports (minimum) 3 x HDMI, 1 x VGA. 1 x Audio in, 1 x Slot-in PC(OPS) or Higher, Output Ports (minimum) 1 x Audio out or gigher, USB Ports(minimum) 4 x USB 3.0 Type A, 1 x USB 2.0 Type A, 2 x USB Type B (touch) or Higher, Communication ports(minimum) 1xRS232 In, 1 x RJ 45 ethernet port or Better. Continue. next Page

Built in Peripherals: Speaker Stereo sound with in-built 25 watt x 2 speakers and subwoofer of 10 watt (OEM of interactive display should provide external speakers of the same make, if required, if the wattage of inbuilt speakers is less than the required wattage), Magnetic pen holder should have inbuilt magnetic pen holder with up to two pens. Tutor friendly experience should have control buttons on interactive display like Volume up/Down, Home, Back, Menu Touch on/off & Power Buttons for ease in teaching. Quiz should have in built tool to allow participants to submit answers from their smart phones (Answering/Voting/Messaging). Built in wi-fi should have inbuilt dual band wifi (2.4 & 5Ghz), Built in Hotspot should have inbuilt hotspot with internet sharing across the connected devices, built in Bluetooth should have inbuilt Bluetooth version 5.0 or latest. Stylus should have minimum 2 Nos of Stylus, Remote control should have remote control to operate the interactive display. Software: Whiteboard interactive software should have inbuilt whiteboard software for teaching/training using interactive display features like(Pen, thickness of Pen, colors of Pen, Pixels eraser and Region eraser, Shapes (circles, Triabgles, rectangle, arrows), Backgroung of white board (multiple colours also use picture, shape), Redo/Undo, Next/Previous, Select & drag option, Switching between single touch and multiple touch, Clear screen, list of pages with deleting option, switching tool bar right to left, many other tools(Compass, Protector, Insert table, calculator, curtain, timer, calendar, camera, spotlight multiscreen (divide board in 2,3 and 4 parts with background color and different pen colr), on screen annotations. Interactive software should be of same OEM. Interactive software of the interactive display should detect the visual presenter/Visualizer and should be able to annotate on the image captured by the Visual Presenter / Visualizer. Wireless screen sharing interactive display should allow user to share/mirror the content of the Laptop/Desktop and mobile device(Android) wirelessly and sould have screen share software to show up to 4 multiple screen at same time. Quick acess tool floating tool should be available on all screen for quick acess tools and same sould be customized as per user requirement. Continue. next Row

Play store support should have built in google play store to download applications direct from play store. Youtube should have built in ypotube application and should support up to 4K resolution. Inbuilt cloud drive interactive display should have inbuild cloud drive acess from Google drive and one drive. Software based video conferenceing device should support software based VC with internal android platform like Google meet, Cisco WebEx, Skype, Microsoft teams & Zoom applications. Multiple controlling menu should have multi controlling menu including side menu, floating menu and pull up menu. Gesture control should have gesture control like Hold five fingers on screen for interactive display sleep mode, hold and move three fingers on screen for floating menu & swipe the screen upside for pull up menu control etc. (Hugo techno/ LG/ Samsung/ Globus/ Oscars Pro make – 1 No.

b). WISH spine and fin based modular workstation, with partition. Thickness as 52.4 mm thick and height = 1047 including powder coated aluminum trims. FIN: out of 22.5 mm thick panel formed out of blocks which are 18 mm thick PLB boards wrapped wit laminate at intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric tiles. Bottom tiles-Plain metal. Intermediate Blocks on main spine-Intermediate blocks are given in DL finish. Wire Management through main spine-Wires shall be taken into the sytem throughProviding and placing cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Legs- Metal powder coated legs at the end and shared condition. System shall also have 120 mm high powder coated standalone panel legs to give the system an elevated look. Worksurface-out of 25 mm thick prelam particle board with flat PVC lipping edge banding of size 900 mm w x 600 mm d. CPU trolley-with castors, KBPT with mousetray metal. Note: All partitions and side panels have leveling screws for adjustment in case of Uneven floor to take care of +/- 40mm of uneven flooring. All work complete with electrical new wiring as per lab layout along with module plate. ( Globus infocom / Godrej/ Spacewood/ HNI make). – 40 Nos.

c). Student chair without arm having seat size shall be 450+- 10mm width X 440 +-10mm depth and back size shall be 430+-10 width X 410 +- 10mm height & overall height 960+-10mm. The seat and back shall be made of 15 mm thick hot pressed commercial plywood padded with HR moulded PU foam 50mm thick having density 40kg/m3 in seat and 40 mm thick having density 32 Kg/m3 in back. It should be upholstered with fabric tapestry 1mm thick and 300 GSM. The backrest of the chair should be natural curvature of the spine to provide back support. The seat and back shall be arrested together with 50-60 u thick powder coated HR steel spine and the armrest shall be used black integral polypropylene arm completely joint with seat. The frame structure shall be cantilever support type made up of MS/CRCA powder coated round pipe of Dia 25mm with 2mm thickness. There shall be co-polymer polypropylene shoe provided at the base to avoid scratches on the floor. The chair shall be tested for BIFMA 5.1 standard from the BIFMA approved laboratory and the test report must be uploaded along with technical bid. The OEM of the product must be having ISO 9001:2015, ISO 45001:2018 certification issued by a verified issuing agency by NABCB/IAF. ( Globus infocom / Godrej/ Spacewood / HNI make). - 40 Nos.

d). Split air conditioner (DC inverter type Hot and Cold) 1.5 Ton with all features to be provided i.e. anti dust copper tube grooved indoor unit LED display along with four metre copper pipe with AC wire, PVC drain pipe, voltage stabilizer & stand etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Voltas/ IFB/ Blue Star/ Godrej make) - 2 Nos.