Dharamshala Smart City Limited Tender

Providing and filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete (by deducting plinth beam area) and all carriage and lead lift as per Engg.in charge.

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centering below supporting floor to ceiling in all heights and removal of the same for insitu-reinforced concrete & plain concrete work in floors etc. upto 200mm thickness for vertical & horizontal and flat & circular surfaces of, soffit, beam, slab, column and retaining structure etc. as per direction of Engineer in charge

Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centering, shuttering, strutting and propping etc.and removal of the same for insitu-reinforced concrete & plain concrete work in drains.i/c carriage of materials of all leads and lifts as per Engg. in Charge.

Providing and laying cement concrete mechanically mixed 1:4:8 (1 cement : 4 sand : 8 graded stone aggregate 40mm nominal size) curing complete excluding cost of form work in foundation and plinth including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering in Foundations and plinth including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing and laying cement concrete 1:2:4 (1 cement:2 sand :4 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in Foundation and plinth, walls including attached but tresses, pilasters, and their caps and bases and string courses etc. upto floor two level with carriage of all materials upto all leads and lifts as per Engg. in Charge.

Providing and laying cement concrete 1:1.5:3 (1 cement :1.5 sand :3 graded stone aggregate 20mm. nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation & plinth, walls including attached buttresses, pilasters and their caps and bases string courses etc.and independent piers, columns and pillars up to floor two level. including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing Tor steel Fe500 reinforcement for R.C.C. work including bending, binding and placing in position complete i/c cost of binding wire including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Brick work using common burnt clay second class building bricks with cement mortar 1:5 (1 cement : 5 sand) in super-structure above plinth level upto floor two level including carriage of material upto all leads and lifts and as per direction of Engineer incharge. .i/c carriage of material in all leads and lifts

Stone solling for floors, walking tracks/boulder filling behind retaining walls of selected hard stone including carriage of material in all leads & lifts and as per direction of Engineer in charge.

Random rubble masonry/ polygonal rubble masonry (Uncoursed/brought to courses) with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 Sand : 12 Graded stone aggregate 20mm nominal size) in cement mortar 1:6 (1 cement:6 sand) in breast walls and retaining walls.i/c carriage of material in all leads and lifts

Wire crates of G.I. wire filles with boulders with square cut faces against the wire. including carriage of materials with all leads and lifts and as / Engg. Charge.(Wire crates to be measured and paid for separately).

Wire crates made of G.I. wire 5mm thick corresponding to SWG-6. (150mm.x75mm) mesh filled with boulders with square cut faces against the wire including carriage of materials with all leads and lifts and as / Engg. Charge.(Boulder filling to be measured and paid for separately).

Providing and fixing of G.I. wire fencing, 5mm thick corresponding to SWG-6. 50mm.x 50mm mesh with all taxes and including carriage of material upto all leads and lifts and as per direction of Engineer incharge.

Providing wood work in first class deodar wood, trusses, purlins, rafters, posts,post plates, wall plates and the like wrought framed, hoisted and fixed in position including carriage of material up to all leads and lifts and as per direction of Engineer incharge.

Providing and fixing 25mm thick first class deodar wood wooden plank ceiling/in roofing, with Lap / tongued and grooved jointing and wood screws including carriage of material up to all leads and lifts and as per direction of Engineer incharge. (frame work and cover fillets to be measured and paid for separately).

Providing and fixing first class deodar wood ornamental brackets (300x300x75)mm as/design complete with necessary screws and fittings including carriage of all materials with all leads and lifts and as / Engg. Charge.

Providing and fixing First class deodar wood ornamental pinnacle 350mm long and 80mm dia as/design complete with necessary screws and fittings including carriage of all materials with all leads and lifts and as / Engg.-in-Charge.

Providing eaves board 100mmx25mm. thick including fixing in position first class deodar wood.

Steel work welded in built up sections / hollow section, trusses and framed work including cutting, hoisting, fixing in position and applying a priming coat of red lead paint including carriage of material upto all leads and lifts and as per direction of Engineer in charge.

In beams joists channels ,angles ,tee ,flats with connection plates or angle cleats as in main and cross beems, hip and jack rafters, purlins connected to common rafters and the like. and In gratings framed guard bars, ladders, railling,brackets and similar works.

Providing and fixing 12mm dia nuts with bolts having size

200mm long

150mm long

100mm long

75mm long

Providing and laying natural cobble stone flooring (100x100) and thickness is (80-100)mm, laid over 25mm average thickness of cement mortar 1:3 (1 cement : 3 sand) laid over and i/c pointing and curing complete as per the design patteren and colour approved as per Engg.-In- Charge .i/c carriage of material in all leads and lifts

Providing and laying 60mm thick heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M-35 grade i/c border or kurb block grey or colored over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) .i/c carriage of material in all leads and lifts

Providing and laying 15mm average thickness of slate flooring laying on 20 mm thick base of cement mortar 1:4 (1 cement :4 sand) and jointed with grey cement slurry, including carriage of material for all leads and lifts as per Engg. In Charge.

Providing and fixing 5mm average thickness of slate in risers of steps, skirting dado and cladding on all type surafces of wall & pillars laid on 8 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete with carriage of material for all leads and lifts as per Engg. In Charge.

Slate roofing with 7.5 cm., .Single lap single layer fixed on wooden batten/planks having size of slates 400x200 mm including carriage of material up to all leads and lifts and as per direction of Engineer incharge(wood work to be paid for separately).

Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transversedirection as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane.i/c including of material in all leads and Lifts.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matters sand papering and knotting of readymixed paint brushing with white lead for priming including carriage of material up to all leads and lifts and as per direction of Engineer in charge.

Painting two coats (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade including cleaning the surface all dirt, dust and other foreign matter with readymixed paint other than white.i/c carriage of material in all leads and lifts

Painting two coats (excluding priming coat) on new wood and wood based surface with white or other than white enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering & stopping including carriage of material up to all leads and lifts and as per direction of Engineer in charge.

Applying wax polish on new wood and wood based surfaces with bees wax polish in proportion of 2:1.5:1:0.5(2 bees wax:1.5 linseed oil : 1 turpentine oil:0.5 varnish by weight) to give an even surface including cleaning the surface of all dirt, dust and sand papered smooth. .i/c carriage of material in all leads and lifts

Kangra Wall painting enamel based of approved brand including primer and thorughly brushing the surface free from mortar dropping and other foreign matter on compund wall complete all as per drawing and technical speification and as directed by Engineer-in-charge.

Ruled pointing on brick work with cement mortar 1:3 (1 cement:3 sand), including carriage of material upto all leads and lifts and as per direction of Engineer in charge.

Providing and fixing polycarbonate transparent sheet 1.20mm thick in roofing with galvanised J or L hooks bolts and nuts with G.I. Limpe and bitumen rubber washer complete with all accessories as required as per direction of Engineer-in-Charge. .i/c carriage of material in all leads and lifts

Providing and fixing Spiral Fiber Slide for Kids play area including carriage of all materials with all leads and lifts as/ Engg. In Charge.

Providing and fixing Double wave Fiber slide with platform & canopy, for Kids play area including carriage of all materials with all leads and lifts as/ Engg. In Charge.

Providing and fixing Advance Sea Saw Double seater, for Kids play area including carriage of all materials with all leads and lifts as/ Engg. In Charge.

Providing and fixing Multiplay station (MPS-4), for Kids play area including carriage of all materials with all leads and lifts as/ Engg. In Charge.

Supplying and stacking of good earth at site including royalty and carriage .i/c carriage of material in all leads and lifts By mechanical transport/Head load etc (earth measured in stacks will be reduced by 20% for payment)

Supplying and stacking sludge at site including royalty and carriage u.i/c carriage of material in all leads and lifts By mechanical transport/Head load etc (Sludge measured in stacks will be reduced by 8% for payment)

Mixing earth and sludge or manure in proportion specified or directed as per the direction of Engineer in charge

Grassing with 'Doob' grass including watering and maintenance of the Lawn for 30 days or more till the grass from a thick lawn free from weeds and fit for moving including supplying good earth if needed(the cost for Doob grass shall be paid separately),In rows 7.5 cm. Apart in either direction.as per the direction of Engineer in charge

Preparation of beds for hedging and shrubbery by excavating upto 1.5 metre depth and trenching the excavated base to a further depth of 30cm. Refilling the excavated earth after breaking clods and mixing with sludge or manureia the ratio 8:1 (8 parts of stacked. volume of earth after reduction by 20% : 1 part of stacked volume of sludge or manure after reduction by 8% flooding with water, filling with earth if necessary, watering and finally fine dressing levelling etc. including stacking and disposal of materials declared un-serviceable and surplus earth by spreading and levelling as directed by Enginer in charge including in all leads and lifts

Providing and laying Multi purpose Court (Basketball Court,Volleyball and Badminton court) Size Playing Area (23.24 x 12.14)mtr./reduce or resize as on site. Asphalt Base i/c dressing of soil, compaction of the sub base will be by 8-10 ton roller, carry out anti-termite and weedicide on the total area by spraying and laying a layer of 85mm/ 65mm compacted water bound macadam in one/two layers respectively,WBM to be densely compacted by keying and inter locking the stones to ensure that no settlement takes place.Laying a 30 mm compacted thick hot mix Asphalt BM course, 20 mm compacted thick hot mix A.C course.Seal Coat with stone dust,An open saucer drains at a lower end.150mm thick edge wall for support. 8 layers Cushion KDF Material consist of 1 layer of resurfacer, 1 layer of primer with 4 layer of cushion, 2 layers of color and over the top marking Minimum 8 layered, Good quality synthetic material with binders, surfaces, all weather shield cushion coating (Approved by ITF/BFI) With Acessories of poles 200mm round pipe with 3.2 mtr distance from the board. 25mm back board transparent Acrylic with International Standard die made frame coated die made framewith built in brackets for mounting. Dunking Rim with three spring mechanism, including all taxes and carriage of material upto all leads & lifts, and as per direction of Engineer in charge.

Providing and fixing 3 Seater composite material Benches with back rest (Leg are made with R.CC and seating ,back rest are made with with wooden planks) as per the direction of Engineer in Charge including all leads and lifts

Providing and Planting ornamental trees i/c digging & planting and cost of tree guard (made of precast) at site, with carriage of materials with all leads and lifts as/ Engg. In Charge.

Providing 110 mm dia PVC pipe half perforated extending through the full with of the sub structure with slope of 1(v) :20(H) in drain/ under ground drawing and techanical specification clauses 614,709,1204.3.7., including carriage of material in all leads and lifts and as per direction of Engineer in charge.