Department Of Tourism And Civil Aviation Tender

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Dry stone pitching 22.5 cm thick laid in courses and required profile with hammer dressed stones having no side less than 15 cm, with minimum depth of 20 cm including preparing the bedding surface etc. all complete. (Payment for Stone to be made separately). including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With medium setting bitumen emulsion On W.B.M / W.M.M. @ 0.4kg/sqm including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With medium setting bitumen emulsion On bituminous surface @ 0.25kg/sqm including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Painting road surface marking with adequate nos of coats to give uniform finish with ready mixed road marking paint conforming to IS : 164, on bituminous surface in white/yellow shade, including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete. including carriage of materials up to all lead and lift as per direction of Engineer -in-charge. New work (Two or more coats)

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20 including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Construction of dry lean cement concrete sub base over a prepared sub-grade with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per specifications, cement content not to be less than 150 Kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, for all leads & lifts, laid with a mechanical paver, compacting with 8-10 tonne vibratory roller, finishing and curing etc.complete including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Cement concrete prepared with batch mixing machine including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.Make TATA/Jindal or equivalent.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade including carriage of materials up to all lead and lift as per direction of Engineer -in-charge.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in- charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately) but i/c carriage of materials in all lead , lift and height.

Construction of Pre-Fabricated cabin size (12.00x5.00x5.00)mtr roof hut shape as per dreawing. Specifications:- a) outer wall 50mm thick wall puf insulated panel. B) Roof panel (30/70)mm thick puf panel c) Door and window (As per drawing) upvc. D) PPGI Flashings (U-Channel & corners). e) Hardware & Accessories. f) Erection of wall and roof panel. g) Tile flooring h)PVC ceiling including all civil work required i.e Foundation, footing, plinth beam etc, office, toilets,Electrical work , HVAC,Fire Fighting,plumbing & sanitation, earthing,over head tank 5,000 ltr, septic tank etc as all required work completed including carriage of material in all leads and lifts as per the direction of Engineer-in-charge.

WIRING FOR CCTV SYSTEM Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

CCTV SYSTEM Supply, Installation, Testing and Commissioning of 4 MP bullet camera , ONVIF profile S & G ,UL , CE , FCC Certified ,1/2.8” Progressive Scan CMOS ,2.8 mm to 12 mm motorized varifocal lens ,min illumination : 0.05 Lux @ (F1.2,AGC ON), 0 Lux with IR , Shutter speed : 1 / 5s ~ 1 / 100,000 s , 90 dB WDR , SD card support , Alarm trigger - 1 input / 1 output , Video Compression : H.265 ,H.264 , frame rate : 30fps @ 3MP ,Edge analytics : line crossing , perimeter intrusion ,Face detection , cross counting , stationary object , In built IR LED , IR Distance upto 60 meters , IP 66 , POE including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

Supply, installation, testing and commissioning of 1Professional DVR with 16 Video Inputs, H.264 Compression - D1 Display Resolution with 2.5TB HDD, Expandable up to 8 TB. Total recording frames @ 400 fps. Recording based on Continuous, Motion, Scheduled or alarm, Remote backup through TCP/IP,HTTP Networkable, backup by USB/DVDWR, Client software included, POS Transaction data recording with image. Supplied with Licensed OS, keyboard & mouse. complete as required and as per specifications. The DVR shall be integrated with Access control system. (Along with 2 nos. 4 TB.) including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

40" Full HD LED Professional Display for Monitoring with mounting accessories including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

TELEPHONE AND LAN SYSTEM :-Supply, laying connecting and testing of multi-core telephone armoured/ unarmoured cable of conductor size 0.6mm dia annealed copper conductor PVC insulated PVC sheathed jelly filled (as per DOT specification) cable as required including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

20 Pair telephone armoured cable

Supply, fixing connecting and testing of under noted size of solderless telephone tag block Krone make in surface/recess in wall required size of M.S. box with hinged lockable cover duly stove enamel painted including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

20 pair tag block

Supplying and fixing M.S. box with modular type (RJ-45) outlet for LAN complete as required including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

Supply, installation testing and commissioning of pure server based IP-PBX with 24 Analog extension with CLI facilities System complete as required including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

Supply installation testing and commissioning of Brodband Lan connection complete as required with 10MBPS Speed including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.

Supply installation testing and commissioning of 24 port L2 Managed switch having port density 24 Nos of 10M/100M/1G RJ45 Port POE /POE+ ports , 2 Nos of GbE RJ45/SFP Combo Port , 1X console port , Available POE power 370 W , 52 Gbps switching bandwidth , 8K MAC address support , Support L2 feature STP, RSTP ,MSTP . Support 802.1Q VLAN , port based VLAN , 4K VLAN entries , MAC based VLAN , IP subnet based VLAN . Support IEEE 802.3ad LACP . L3 features - static routing , DHCP feature , Device Management system - topology view , floor view , map view , dashboard , traffic monitoring , cable diagnostics.CE,FCC certified including manual & mechnical carriage of material upto all lead & lift and loading/unloading etc. and as per the direction of the Engineer Incharge.