Bus Stands Management And Development Authority Tender

Dismantling of manhole including R.C.C. top slab, C.I. cover with frame, including stacking of useful materials near the site and disposal of unserviceable materials within all lead as per direction of Engineer- Charge :- Rectangular manhole 120x90 cm (one hundred twenty into ninty centimeter) and 90 cm (Ninty centimeter) deep, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and laying S&S centrifugally cast (spun) iron pipes (Class LA) conforming to IS - 1536 :- 150 mm (one hundred fifty milimeter) dia pipe, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints but excluding the cost of pig lead :- 150 mm (one hundred fifty milimeter) diameter pipe, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Supplying pig lead at site of work, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (one cement isto four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten milimeter) internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg (Twenty three kilogram) and weight of frame 15 kg (Fifteen kilogram) , R.C.C. top slab with 1:1.5:3 mix (one cement isto one point five isto three )1.5 (one point five )Fine sand isto three graded stone aggregate 20 mm (Twenty milimeter) nominal size, foundation concrete 1:5:10 (one cement isto five fine sand isto 10 (Ten) graded stone aggregate 40 mm (Forty milimeter) nominal size), inside plastering 12 mm (Twelve milimeter) thick with cement mortar 1:3 (one cement isto three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design:- Inside dimensions 600x 850 mm (Six hundred into Eight hundred fifty milimeter) and 45 cm (Forty five centimeter) deep for pipe line with three or more inlets :- With common burnt clay F.P.S. (non modular) bricks of class designation 7.5, (Seven point five) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion, (i) Single socketed pipes. 75 mm (Sevety five milimeter) diameter, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion, (i) Single socketed pipes. 110 mm (one hundred ten milimeter) diameter, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Coupler 75 mm (Seventy five milimeter) diameter, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Coupler 110 mm (One hundred ten milimeter) diameter, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Single tee without door 110x110x110 mm, (One hundred ten into one hundred ten into one hundred ten milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Single tee without door 75x75x75 mm, (Seventy five into seventy five into seventy five milimeter)including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. Single tee without door 110x110x110 mm, (One hundred ten into one hundred ten into one hundred ten milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. 75mm (Seventy five milimeter) bend, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (Ten milimeter) gap for thermal expansion. 110 mm (One hundred ten milimeter) bend, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (Fifty into fifty into fifty milimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etc. complete. 110 mm, (one hundred ten milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (Twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:- 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate 20 mm (Twenty milimeter) nominal size), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Centering and shuttering including strutting, propping etc. and removal of form work for :- Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (Three hundred into three hundred milimeter) or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS :- 15622, of approved make, in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm (Twnety milimeter) thick cement mortar 1:4 (one cement isto four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.

Kota stone slab flooring over 20 mm (Twenty milimeter) (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (one cement isto four coarse sand) : 25 mm (Twenty five milimeter) thick, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing PVC floor trap of self cleaning design ISI marked including fixing with approved adhesive, cost of cutting and making good the wall and floors etc.complete. 110mm X 90 mm, (one hundred ten milimeter into ninty milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred milimeter) sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :- 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:- White Vitreous china Orissa pattern W.C. pan of size 580x440 mm (Five hundred eighty into four hundred forty milimeter) with integral type foot rests, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :- 15 mm (Fifteen milimeter) dia nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.

Providing and fixing 100 mm (one hundred milimeter) sand cast Iron grating for gully trap, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in Charge.