Bus Stands Management And Development Authority Tender

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x1.5 sqm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x6.0 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x10 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x16 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 25 mm. dia

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 32 mm. dia

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 40 mm. dia

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required.

Supplying and fixing G.I. Modular box of (140mmx78mmx50mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required.

Supplying and fixing sheet metal bus-bar chamber suitable for 100 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (25.4mmx3.17mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx400mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 200 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (25.4mmx4.75mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx450mmx150mm) nominal with all accessories including connections, earthing the body etc. as required:-

Supplying and fixing sheet metal bus-bar chamber suitable for 300 Amp. 415 volts capacity with 4 No. copper strip bus-bars each of length 300mm & cross-sectional area (31.75mmx6.35mm), enclosure made from 1.6 mm thick M.S. sheet having overall dimensions (380mmx500mmx200mm) nominal with all accessories including connections, earthing the body etc. as required:-

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. 100 Amp. -16 KA

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required. 250 Amp. -35 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-4 way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-8 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

Extra for using salt and charcoal for pipe earth electrode complete as required.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:-Armoured cable 6 sq. mm (twin core)

Providing and laying of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade direct in ground; to be laid 1 meter below the ground level including excavation sand cushioning, protective covering and refilling the trench etc. of the required size:- Armoured cable 150 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 50 sq. mm (3.5 core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 150 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 25 Liter capacity water heater (Cat-A)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 35 Liter capacity water heater (Cat-A)

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Heavy duty, 300 mm sweep

Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm dia. and of suitable depth, to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- (b). Overall length 8 meter, with planting depth 1.5 m, length of sections 4.5 m, 1.75m and 1.75m (bottom, middle and top respectively), outer dia and thickness of sections 127mmx4.5mm, 101.6mmx3.65mm and 76.1mmx3.25mm (bottom, middle and top respectively) with approximate weight 84 Kg.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 40 mm dia. G.I. pipe, heavy class

P/I of following type of decorative LED batten with aluminium housing, antiglare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage. AC 220-240 V, 50/60 Hz, complete in all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc as required. Make Philiphs, Syska, Bajaj or any other approved by Engineers-in-Charge. LED Batten 20 Watt 1200 MM.

S/F of LED bulk head fitting 10 watt including making connections, testing etc. as reqired.

P/I of of following type of surface mounting square type LED panel with amuminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efiicient constant cuttent, non-integral, electronic driver, suitable for input voltage: AC 220-240 V, 50/60 Hz, complete with all accessories, connections, testing and commissioning etc as required. Make: Philiphs, Syska, GE, Bajaj or any other approved by Engineer-in-Charge. LED panel light 300mmx300mm 30 watt.

S/F of fancy wall bracket containing thread type LED lamp holder of all shapes and sizes complete with all aspects including LED lamp making connection testing etc as required.

S/F of cubical panel for 10 Energy meters with 100 amp 4 pole 25 KA TMR with O/L and S/C protection spreader link MCC 100 amp indications lamps LED types RBY and space for KWH meter single phase MCCB 32 amp BP 10 KA indoor type single door wall mounted/fixed type 3 standing single front MS CRC sheets 16 gaze dully painted with seimens grape powder coated paints approximately size H2000 MM x (W) 900 MM x (D) 150 MM. Assembly charges 100 amp 4 strip copper bus bars vertical/horrizontal and earth strip thorugh out the length of panel. Current density of copper bus bar shall be 1mm x 1mm = 1.66 amp. Copper shall be electrical grade.Comtroll wiring with copper flexiable wires. Size of controll wires shall be 2.5 sqm copper flexiable for CT circuts and 1sqm for control wiring with thimbles printed sleeves tie and belt etc. Assembly charges of accessories like gascate door locks copper flexible door earth legend plates reading glass and wooden ply etc.

S/F of Bajaj make SKYLITE surface mounting LED 2x2 Luminaire CAT No BCTBLS 36 ZT NW, White powder cpated CRCA housing with highpower LED's. Aluminium frame with flat white high transmission acrylich cover. Complete with all accessories including making connections, testing etc. to the best satisfaction of Engineer-in-Charge as required.

S/F of MCCB 200 amp TP 25 KA with 200 amp Bus Bar in cubical pannel indoor single door wall mounted/fixed type dust proof approximate size 800 mm x 700 mm, depth 200 mm assembly charges of 200 amp TPN Copper Bus Bae Vertical and Earth Strip through out the length of pannel current density of the copper bus wire shall be 1 mm x 1mm x 1.66 amp. Copper shall be electrical grade. All bus bar link shall be covered/insulted with heat sinkable sleabs of coloured code reed, yellow, blue, black with indicator lamps control wiring with copper flexiable wire size of control wire shall be 2.5 sqm copper flexiable for CT Circet and 10 sqm controll wiring as per analysis of rates. The pannel should be as per analysis of rates as approved by the Engineer-in-Charge.

P/F of 100 amp MCCB with enclosure 3 pole/ 4 pole MCCB 100 amp.

S/F of following type of LED Street Light LUX-SLB-72-72 Watt complete in all aspect as required at site.