Bus Stands Management And Development Authority Tender

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x1.5 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x2.5 Sq. mm.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. 2x10 Sq. mm.

Wiring for circuit / sub-main with 4x16 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 2 No.16 Sq.mm. (4x16+2x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. ( including switch & bakelite sheet etc.) Group C.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface /recessed, Steel/PVC conduit as required. PVC insulated HRFR LS Copper conductor 1.5 Sq. mm. 3x1.5 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface /recessed, Steel/PVC conduit as required. PVC insulated HRFR LS Copper conductor 1.5 Sq. mm. 5x1.5 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface /recessed, Steel/PVC conduit as required. PVC insulated HRFR LS Copper conductor 2.5 Sq. mm. 3x2.5 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface /recessed, Steel/PVC conduit as required. PVC insulated HRFR LS Copper conductor 4 Sq. mm. 3x4.0 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface /recessed, Steel/PVC conduit as required. PVC insulated HRFR LS Copper conductor 4 Sq. mm. 5x4.0 Sq. mm.

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface /recessed, Steel/PVC conduit as required. PVC insulated HRFR LS Copper conductor 10 Sq. mm. 3x10 Sq.mm.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 20 mm. dia

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:- 25 mm. dia

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.. S.P. 5/ 6 Amps one way switch, piano type.

Supplying and fixing following rating Piano-type switch /socket on the existing switch box / cover including connections etc. as required.. 5 pin 5/ 6 Amps socket outlet, porcelain base/ piano type.

Supplying and fixing stepped type Modular fan regulator on the existing modular box including making connections etc. as required.

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Single pole. Cat-A. Havells/L&T make

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A. Havells/L&T make

Supplying and fixing single pole, blanking plate in the existing MCB DB complete as required.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-4 way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-6 way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-8 way

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-12 way

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 6 sq. mm (twin core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 16 sq. mm (four core)

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:- Armoured cable 25 sq. mm (3.5 core)

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Nonreturn valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 25 Liter capacity water heater (Cat-A) Crompton /Bajaj make

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required:- Ceiling Fan 1200 mm sweep, Category-A Crompton /Bajaj make

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Exhaust Fan, Heavy duty, 300 mm sweep Crompton /Bajaj make

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 40 mm dia. G.I. pipe, heavy class

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Square LED Panel Light 30W Surface Havells/Bajaj/Crompton make

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make LED Batten Light 20W Havells/Bajaj/Crompton make

Providing and installation of LED bulk head of suitable for input voltage ;220\240 ,50Hz ,complete with all accessories,including mounting clips & loop out wire ,connections, testing and commissioning etc. as required make Havells/Bajaj/Crompton make

Supplying and fixing of Exhaust fan shutter

Supplying and fixing of computer point with Piano type switch & Socket 2 Nos. Switch & 3 Nos. socket complete in all respect connection etc. as required.

S/F of Street light 45W pressure die cast Al housing powder coated with weather proof gasket ensuring IP66 ,heat resistant toughened glass, high efficiency street lighting lenses, surge protection in built 4kV of Twinkle luminaires make as per cat no:- LuxMax-SLB45 45W

S/F of Energy saving and Environmental friendly, longlife, exclusive innovative die cast aluminium IP66 flood light ,suitable for highlighting architectural façade and general purpose lighting as per Havells JETAIRISFLS 150W LED 757PSYMLTG price list w.e.f 1st January,2020 Havells/Twinkle make

S/F of MCCB 100A 4P 25kA TMR with O/L & S/C protection=1no., Spreader link MCCB 100A 4P=2nos. , indication lamps LED type R,Y,B=3nos.,control SP MCB 6A 10kA=3nos. Fabrication/Painting & Assembly Fabrication charges of cubical type, indoor type,single door,wall mounted, fixed type, free standing single front,dust proof & compartmentalized Distribution Board made out of M.S. CRC Sheet 16G,duly painted with Siemens Grey Powder Coated Paint as per Drawing=1no. Assembly Charges of 100A 4Strip Copper Busbar (Vertical/Horizontal) & Earth strip throughout the length of Panel (current density of Copper Busbar shall be 1mmx1mm=1.66 Amp.) Copper shall be Electric Grade ,Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black.=1no. Assembly Charges of Copper solid/ Copper flexible wire interconnection Busbar to MCCB &MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables.=1no. Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.=1no. Assembly Charges of Accessories like Neoprene Gasket, Doorlocks, Copper Flexible door earth, legend plates etc.=1no. L&T/schneider make

S/F of MCCB 400A 4P 36kA TMR with O/L & S/C protection=1no. Spreader link MCCB 400A 4P=2nos. DMF meter=1no., Current transformer 400/5A CL.1.0 10VA=3nos. ,CT shorting link =6 nos. ,N link =1no. , indication lamps LED type RYB =3nos. , control sp MCB 6A 10kA =3nos. Outgoing:- MCCB 100A 4P 25kA TMR with O/L & S/C protection =5 nos. , spreader link MCCB 100A 4P= 10 nos. Fabrication/Painting & Assembly Fabrication charges of cubical type, indoor type,single door,Floor/wall mounted, fixed type, free standing single front, dust proof & compartmentalized MainL.T.Panel made out of M.S. CRC Sheet 16G Base Frame 50X50X5mm duly painted with Siemens Grey Powder Coated Paint as per specification Approximate Size (H) 1550mm X (W) 1500mm X (D) 450mm X (L) 300mm =1no. ,Assembly Charges of 400A 4Strip Aluminium Busbar Horizontal/Vertical) & Earth strip throughout the length of Panel (current density of Aluminium Busbar shall be 1mmx1mm=1 Amp.) Aluminium shall be Electric Grade E91 Busbar supports shall be DMC epoxy Insulators. All Busbars Links shall be covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. =1no., Assembly Charges of Aluminium solid/ Copper flexible wire interconnection Busbar to MCCB & MCCB to field side for Cable termination duly covered/ insulated with Heat Shrinkable sleeves of coloured coded Red, Yellow, Blue & Black. All Interconnections of fields side are supported by conical, L & Finger type insulators of adequate size to support & sustain the weight of cables=1no. , Control Wiring with Copper Flexible Wire (size of control wire shall be 2.5 sq. mm copper flexible for C.T. Circuit & 1.0 sq. mm for Control Wiring) with thimbles printed sleeves, tie & belt etc.=1no. , Assembly Charges of Accessories like Neoprene Gasket, Doorlocks, Copper Flexible door earth, legend plates etc. =1no. L&T/schneider make.

Providing & installation of Wall mounting Turbo force fan of following size motor i.e. hang the same in position on the wall connection testing and commissioning with best satisfaction of Engineer in charge:- Turbo force wall fan 450mm Havells/Crompton/Bajaj

S/F of LED Street light 90W of Twinkle luminaire make pressure die cast Al housing powder coated with weather proof gasket ensuring IP66 ,heat resistant toughened glass, high efficiency street lighting lenses, surge protection in built 4kV of Twinkle luminaires make as per cat no:- LuxMax-SLB 90 w.e.f 01/06/2020 Twinkle make only.