Bus Stands Management And Development Authority Tender

Wiring for light/ power plug with 2X4 sq. mm (Two into four square milimeter) FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No. 4 sq. mm (Four square milimeter) FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm (Four into four square milimeter) FRLS PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 2 Nos. 4 sq. mm (Four square milimeter) FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 1.5 sq. mm (Two into one point five square milimeter) + 1 X 1.5 sq. mm (One into one point five milimeter) earth wire.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 2.5 sq. mm (Two into two point five square milimeter) + 1 X 2.5 sq. mm (One into two point five square milimeter) earth wire.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2 X 10 sq. mm (Two into ten square milimeter) + 1 X 6 sq. mm (One into six square milimeter) earth wire.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 X 16 sq. mm (Two into sixteen square meter) + 1 X 6 sq. mm (One into six square milimeter) earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.4 X 10 sq. mm (Four into ten square milimeter)+ 2 X 6 sq. mm (Two into six square milimeter) earth wire.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 16 sq. mm (Four into sixteen square milimeter) + 2 X 6 sq. mm (Two into six square milimeter) earth wire.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way , Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole.

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A.

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make LED Batten Light 20W.

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make LED Batten Light 10W

Supplying and fixing of computer point with Piano type switch & Socket 2 Nos. Switch & 3 Nos. socket complete in all respect connection etc. as required.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase,230 volts complete as required:-

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Providing and installation of following type of surface mounting square type LED 1' x 1' panel18/20watt Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved make.

Providing and fixing of LED surface/recess mounted LED flate pennel 2' x 2' 36 watt of CRCA sheet duly powder coted with high efficient LEDS & glare freefull opal diffuiser IP 20 luminair complete with connection testing and commissioning etc. as required complete in all respect per entire setisefection of the Engineer in charge. Make : Phlips/ Bajaj/ Havells.

Supplying and erection of wall mounted metal frame structure for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35mm x 35mm x 6mm, (Thirty five milimeter into thirty five milimeter into six milimeter) duly welded supporting arrangement of M.S. flats on the fron to suit the fixing of SFU including painting and bonding to the existing earth as required:-

Supplying and erection of wall mounted metal frame structure for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 25mm x 25mm x 6mm, (Twenty five milimeter into twenty five milimeter into six milimeter) duly welded supporting arrangement of M.S. flats on the fron to suit the fixing of SFU including painting and bonding to the existing earth as required:-

Providing and installation of LED bulk head of suitable for input voltage ;220\240 ,50Hz ,complete with all accessories,including mounting clips & loop out wire ,connections, testing and commissioning etc. as required make :- Havells , Bajaj, syska.

Wiring for circuit / sub-main with 3x25+1x16 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No.16 Sq.mm. (3x25+3x16) HRFRLS/PVC insulated single core copper conductor cable for earthing as required.

S/F of Cubical pedestal(1900mm*1800mm*500mm) (One thousand nine hundred milimeter into one thousand eight hundred milimeter into five hundred milimeter) made of mscrc steel 16 gauge and base frame (75mm*40mm*3mm) (Seventy five milimeter into forty milimeter into three milimeter) duly painted with siemens grey powder coated painted as per specification Incomer:- Digital metering set (detail below), Amp meter =1no, Voltmeter =1no, Ammeter selecter switch=1no., Voltmeter selecter switch =1no., Current transformer=3no., Phase indicating lamp LED=3no., Control sp mcb=3no., Terminal strip=1no., Outgoing:-MCCB 250 amp 4p 36ka=1no., Spreader link 250amp 4p=4no., MCCB 100amp 4p 36ka=6no., Spreader link100amp 4p=6no., Assembly charges of 600amp 4strip Al busbar& earth strip throughout the length of panel.( Note: the drawings and design of main LT panel to be read in this office any working hours except holidays) Note: the material will be provided of L&T make.

S/F of Steel studs full thread :- 8mm

S/F of Steel studs full thread :-10mm

S/F of Steel studs full thread :- 12mm