Bus Stands Management And Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Bus Stands Management And Development Authority Tender
Coronavirus COVID 19
Eprocure
Opening Date28 Dec 2018
Closing Date5 Mar 2019
Tender Amount₹ 1,68,76,000
Costs
EMD
₹ 2,08,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of New Bus Stand At Parwanoo, District Solan (hp)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_BSMDA_27416_1Bid Award Id
ViewTender No
HPBSMDA/EE/(2)/2018 tENDERS (VOL-II)Tender Authority
Bus Stands Management And Development Authority ViewPurchaser Address
-Website
http://http://hpctbsmda.com/page/History
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing form work with steel plates 3.15mm.thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies, height of propping and centring below supporting floor to ceiling in all hieghts/ depths and removal of the same for insitu-reinforced concrete & plain concrete work in : a) Foundation, footings basis of columns etc. and mass concrete, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge
117.34
-
-
... More
b) Flat surfaces such as soffits of suspended floors, roofs, landings and the liks.
19.92
-
-
... More
c) Sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels not exceeding 1 Mtr. in depth in all heights from floor with all leads and lifts.
127.58
-
-
... More
d) Columns, pillars, posts and struts Square, rectangular or polygonal in plan with all leads and lifts.
81.84
-
-
... More
e) Vertical surfaces such as walls (any thickness) Partitions and the like including atteched Pillasters buttresses, Plinth and string courses and the like with all leads and lifts.
708.28
-
-
... More
Providing and laying cement concrete 1:4:8 (one cement:Four sand:Eight graded stone aggregate 40mm ( Forty milimetre) nominal size) machenilcally mixed and curing complete excluding cost of form work in: Foundation , including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge
66.88
-
-
... More
Providing and laying cement concrete 1:2:4 (One cement: Two Sand: Four graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in: Foundation and plinth, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge
2.33
-
-
... More
Providing and laying cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 20 mm (Twenty milimwetre) nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work in: Foundation and Plinths, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge.
324.04
-
-
... More
Providing and laying cement concrete 1:2:4 (one cement: two Sand: four graded stone aggregate 20mm( twenty milimetre) nominal size) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete :In Foundation and Plinths, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge.
16.2
-
-
... More
Providing and laying machenilcally mixed and vibrated cement concrete work 1: 1.5:3 ( One Cement: One and half Sand: three graded stone aggregate 20 mm (twenty milimetre) nominal size) curing complete excluding cost of form work and reinforcement for reinforced concrete work i,ncluding carriage of all labour equipment and material to various locations through all modes of transportation,all incidental charges.in: a)Foundations,footings bases of columns and the like and mass concrete, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge.
47.34
-
-
... More
b) Suspended Floor roofs, landing and shelves and their support balconies,beams,girders,bressumers and contilever with all leads and lifts.
99.25
-
-
... More
c) column, pillars posts and struts etc.upto floor two levels with all leads and lifts.
12.28
-
-
... More
d) Stair cases excluding landing but including prepairing of the surface and finishing of noising up all floor level.
1.92
-
-
... More
Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete upto all floor level including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
26442
-
-
... More
Stone Soling under floor properly hand packed filling interstices with Kharanja stone and consolidating with power road roller to the required gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. Including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges.
49.7
-
-
... More
Brick work using common burnt clay building bricks in foundation and plinth in Cement Mortar 1:4 (One Cement : Four Sand) Second Class Bricks Extra for brick work in : In Foundation and plinths upto all floor level including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per entire satisfaction of the Engineer-in charge.
13.65
-
-
... More
Brick work using common burnt clay building bricks in Cement Mortar 1:5 ( One Cement : Five Sand) Second Class Bricks in : Super-structure above plinth level upto all floors, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per entire satisfaction of the Engineer in charge.
2.5
-
-
... More
Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 ( One cement:Four sand) Second Class Bricks in Foundation and plinth, including carriage of all labour equipment and material to various locations through all modes of transportation and complete as per entire satisfaction of the Engineer in charge.
16.72
-
-
... More
Half brick masonry in common burnt clay building bricks in Cement Mortar 1:4 (1 cement:4 sand) Second Class Bricks Extra for half brick masonry in super-structure above plinth level upto all floor level including carriage of all labour equipment and material to various locations through all modes of transportation and complete in all respect of as per entire satisfaction of the Engineer in charge.
20
-
-
... More
Second class Half brick thick Honey comb brick work with common burnt clay building bricks in cement mortar 1:4 (One Cement :Four sand) In Soak pit including carriage of material upto all leads, and lifts.
14.4
-
-
... More
supplying/providing second class brick aggregate 50mm nominal size using common burnt clay building bricks including carriage of material upto all leads, and lifts.
11.9
-
-
... More
Providing and fixing flush door shutters interior grade, commercial type, core of black-board construction with frame of first class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters: 40 mm (Forty milimetre) thick including black enamelled M.S. butt hinges. Including carriage of all labour equipment and material to various locations through all modes of transportation and all incidental charges and complete in all respect of as per entire satisfaction of the Engineer in charge.
33.6
-
-
... More
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. (a)250x16mm, Iincluding all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
16
-
-
... More
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete. (a)200x10mm, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
96
-
-
... More
Providing and fixing aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete. (a) 125 mm, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
112
-
-
... More
Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. For doors windows and ventilatiors and glazed partitions frames. including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per entire satisfaction of the Engineer-in charge.
2500
-
-
... More
Providing and fixing glazing in aluminium doors, windows, ventilators shutters and partitions etc. fixed with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) Glazing with glass panes of 5.00 mm thickness, Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
115
-
-
... More
Providing and fixing galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm in aluminium doors, windows, ventilators shutters and partitions etc. fixed with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) Including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges and complete in all respect of as per entire satisfaction of the Engineer in charge.
80
-
-
... More
Kota stone flooring 20 mm (twenty milimetre) (average) thick base of cement mortor 1:4 (One cement :Four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete. 30 mm thick, Including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges and complete in all respect of as per entire satisfaction of the Engineer in charge.
497
-
-
... More
Kota stone slab 25 mm (twenty five milimetre) thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (one cement :three sand) the stair tread shall be finished with double semi round nosing in kota stone and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete. including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges and complete in all respect of as per entire satisfaction of the Engineer in charge.
49.7
-
-
... More
Providing and laying anti skid tiles 6mm ( six milimetre) thick Orient-Bell, Kajaria & Nitco in flooring (300x300mm size) in flooring 12 mm thick cement mortar 1:3 (one cement :3 sand) and jointed with cement slurry, including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges and complete in all respect of as per entire satisfaction of the Engineer in charge.
48
-
-
... More
Providing and fixing 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles of any size and colour manufactured of approved shade and design of NITCO, NTC, GICO,Kajaria in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including cost of tiles where required to be cut i/c carriage of material in all leads & lifts and complete as per entire satisfaction of the Engineer- in charge.
256
-
-
... More
Providing & laying granite stone (close grained rounded at edge)in flooring, skirting riser of steps & dado 20mm (average) thickness base of cement mortar 1:3 (1 cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing & polishing complete 20mm thick including carriage of material in all leads & lifts and complete as per entire satisfaction of the Engineer-in charge.
25.5
-
-
... More
Providing and fixing colour glazed tiles 6mm. thick Orient-Bell, Kajaria & Nitco in wall (200 x400mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement. including carriage of all labour equipment and material to various locations through all modes of transportation and all incidental charges and complete in all respect of as per entire satisfaction of the Engineer in charge.
141.48
-
-
... More
Supply & Fixing of COLORBOND LYSAGHT TRIMDEK profile sheet of 1072 mm Supply width and nominal 28.5 mm deep ribs.The end rib shall be designed for anti-capillary action, to avoid any seepage of water through the lateral overlap. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-Tensile steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with Super Polyester Colorbond XRW quality paint coat as per AS/NZS 2728 Class 3 of BlueScope Steel make. The paint will have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every regular interval for confirming genuinity of the material In roofing.Any loss of Govt. and private property during the execution of work the absulte responsibilty of the contractor, including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge .
523.6
-
-
... More
Design, preparation of drawings, supply and erection in position of SMARTRUSSS® Roof truss solution (top and bottom cord, Top batten and ceiling batten) manufactured from zinc-aluminium alloy coated steel- ZINCALUME steel(minimum yield strength of 550 MPa, coated with anAZ150 (min 150 gm/m2 total on both side complying to AS1397) base metal thickness of 0.75/1.0 mm and shall be C – type having web 75 X 40 mm or 100 X 50 mm with lip size of 8.00 / 12.0 mm & R 5.0 mm, whichever is economical as per AS1397/NZM design calculation and shall have a spacing @1200 c/c. The truss shall be design through appropriate software complying to design code of AS 1170 -2- 1998 /AS 4600-1996 and most economical design. Self tapping / drilling fasteners shall be min. 40 μm Zinc coated / min. 25 μm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners. The truss purlin members should be manufactured from ZINCALUME (min. 150 gsm & 550 MPA) steel of base metal thickness 0.75/1.0 mm and shall be top hat TS41 (41 X 32) or TS61 (61 X 36.5). Design of Cold formed sections to be done by SUPRACADD or equivalent Design software of relevant AS/NZM codes (4600,1170)Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor, including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge.
5633.94
-
-
... More
Providing and fixing on wall face PVC (D-Plast/finlox) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete.150mm dia pipes including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per entire satisfaction of the enginer in charge.
30.4
-
-
... More
Providing and fixing on wall faces PVC (D-Plast/ Finlox) accessories for rain water pipes including filling the joints with approved adhesive complete. including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per entire satisfaction of the enginer in charge. (i) PVC Plain bend 150mm dia
4
-
-
... More
Providing and fixing PVC clamps ISI marked of approved design with steel screws and rawal plugs etc. complete. 150 mm dia, including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per entire satisfaction of the enginer in charge.
28
-
-
... More
Steel work welded in built up sections,trusses and framed work, beams,joists,channels,angles,Tees and flats etc. including cutting ,hoisting ,fixing in position and applying a priming coat of red lead paint. including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
470
-
-
... More
Providing and fixing frame for windows and ventilators manufactured of M.S channel 75*40 (Seventy into Forty) millimetres for end frames and for centre frame channel section 75*40 mm with M S flat 75*40mm (seventy Five into Five) millimetres in combnation welded together to make one frame with making Square steel section with MS Flat of 20*4 mm and 12*4mm,Shutter sofrolled steel section F-7B section i/c glass panes of 4 mm thick in glazed panel and wire gauge of desiganation 85 with 0.56 mm dia in wire gauge panel and fixed glazing fixed with angle and T-section of 25*25*3 mm and flat of 12*4mm in sash bars dully welded in all corners and joints properly hold fast of MS flat 20*20*8mm dully welded in corner and joints all steel sections ,embeded in cement concrete block 1:3:6 (One cement :Two sand :Three graded stone aggregate Twenty milimetre nominal size) and 100*100*100 mm size including P/F all fittings i.e. Handles, tower bolts, hooks and eyes and applying a primer with red lead paint and fixed in position complete in all respect as per architectural Drg. and as per direction of the Engineer-in charge complete window, Including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
150
-
-
... More
Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring: Shutters having width below 3.5 metres,including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
47.94
-
-
... More
Providing and fixing 27.5 centimetre long wire spring grade No.2 for rolling shutters including carriage of all labour equipment and material to various locations through all modes of transportation,including all incidental charges, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
... More
Providing and fixing top cover for rolling shutters, Shutters having width below 3.5 metre. Including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
15.98
-
-
... More
Providing and fixing ball bearing for rolling shutters. Shutters having width below 3.5 metre. including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
... More
Designing, providing, installing and fixing factory finished custom designed cold form Light Gauge Steel Framed super structure comprising of steel wall panel, trusses, purlins etc manufactured from zinc-aluminium alloy coated steel- ZINCALUME steel(minimum yield strength of 550 MPa, coated with anAZ150 (min 150 gm/m2 total on both side complying to AS1397) base metal thickness of 0.75/1.0 mm and shall be C – type having web 75 X 40 mm or 100 X 50 mm with lip size of 8.00 / 12.0 mm & R 5.0 mm, whichever is economical as per AS1397/NZM design calculation. The panel shall be design through appropriate software complying to design code of AS 1170 -2- 1998 /AS 4600-1996 and most economical design. Self tapping / drilling fasteners shall be min. 40 μm Zinc coated / min. 25 μm Zinc-Tin alloy coated, Hex head, self-drilling screw as per AS 3566-2002 Class 3 fasteners. Design of Cold formed sections to be done by SUPRACADD or equivalent Design software of relevant AS/NZM codes (4600,1170).including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge.Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor. The frames shall be fixed to RCC slab or Tie beam over Neoprene rubber using self expanding carbon steel anchor bolt of dia as per approved drawings. design subject to minimum 12mm diameter and 121mm length conforming to AISI 304 and 316 at 500mm c/c with minimum embedment of 100mm in RCC and located not more than 300mm from corners or termination of bottom tracks complete in all respects, including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
4983.8
-
-
... More
Providing and fixing of external wall system on Light gauge steel frame work with COLORBOND LYSAGHT accessories using self drilling/ self tapping screws complete :. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-Tensile steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with Super Polyester Colorbond XRW quality paint coat as per AS/NZS 2728 Class 3 of BlueScope Steel make. The paint will have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every regular interval for confirming genuinity of the material, including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge .Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor.
417.97
-
-
... More
Providing and fixing of internal wall system on Light gauge steel frame work with 12 mm thick cement particle board as per standard sizes fixed with self-drilling / taping screws / fasteners @ 60cm c/c of approved make, Screws shall be of counter sunk rib head of 1.60 mm to 4mm thick of 8 to 10 gauge of length varying from 25 to 45mm. Proper taping and jointing to be done using fiber mesh tape and epoxy and acrylic based jointing compound for seamless finish. In all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge.Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor. including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge .Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor.
1453.3
-
-
... More
Providing and fixing Decking Sheet 1.0 mm thick for floor slab to fixed with screws, rawel plug & washers, including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge .Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor.
287
-
-
... More
Supply & Fixing of COLORBOND LYSAGHT accessories using self drilling/ self tapping screws complete :. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness (BMT), Hi-Tensile steel with min. 550 MPa yield strength, metallic hot dip coated with Aluminum-Zinc alloy (55% Aluminum, 45% Zinc) as per AS 1397 - Zincalume AZ150 (Min. 150 gms/sq.mt total on both sides) with Super Polyester Colorbond XRW quality paint coat as per AS/NZS 2728 Class 3 of BlueScope Steel make. The paint will have a total coating thickness of nominal 35 μm, comprising of nominal 20 μm exterior coat on top surface and nominal 5 μm reverse coat on back surface over nominal 5 μm primer coat on both surfaces of approved colour shade by concern authority. The sheet shall have brand marking of the manufacturer giving product details on the back of the sheet at every regular interval for confirming genuinity of the material . IN Ceiling ,including all leads, lifts and carriage of materials and as per entire satisfaction of the Engineer-in charge.Any loss of Govt.and private property during the execution of work the absulte responsibilty of the contractor.
773
-
-
... More
Supply & fixing of COLORBOND LYSAGHT accessories using self drilling /self tapping screws complete: the feed material is manufactured out of nominal 0.45 mm base metal thickness (BMT) .The feed material is manufactured out of nominal 0.45 mm base metal thickness (BMT) ,Hi- tensile steel with min. 550 MPA yield strength metallic hot dip coated with aluminium - Zinc alloy (55% Aluminium,45% Zinc ) as per AS 1397 -Zincalume AZ150 (min.150 gms/sq.mt total on both sides) with super polyster colorbond XRW quality paint coat as per AS/NZS 2728 CLASS 3 of blue scope steel make. The paint will have a total coating thickness of nominal 35 μm, comprising of nominal 20μm exterior coat on top surface and nominal 5μm primer coat on both surfaces of approved colour shade by concern authority .The sheet shall have brand marking of manufacture giving product details on the back of the sheet at every regular interval for confirming genuinity of the material. Gutter- upto 600 mm grith including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
66.1
-
-
... More
15mm cement plaster in single coat on fair /Rough side of brick/concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:5 (One cement: Five sand), including all leads ,lifts and carriage of materials and complete as per entire satsfaction of the engineer-in charge.
78.48
-
-
... More
Painting two coats (including priming coat)on new steel and other metal surface under coat with ready mixed paint brusing to give an even shade ,including all leads ,lifts and carriage of materials and complete as per entire satsfaction of the engineer-in charge.
1210
-
-
... More
Applying priming coat over new wood and wood based surfaces after and including prepering the surface by thoroughly cleaning oil,grease,dirt and other foreign matter) sand papering and knotting. Readymixed paint brushing wood primer pink , including all leads ,lifts and carriage of materials and complete as per entire satsfaction of the engineer-in charge.
1453.3
-
-
... More
Painting two coats (excluding priming coat)on new wood and wood based surfaces,with readymixed paint,brushing to give an even shade including cleaning of all dirt,dust and other foreign matter sand papering and stopping:-- Readymixed paint other then white, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1453.3
-
-
... More
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete. of the Engineer in charge, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1453.3
-
-
... More
Providing under layer for plinth protection of 75mm thick (unconsolidated) bed dry brick/stone aggregated 40mm nominal size with rammed and consolidated and grouted with fine sand including preparation of ground, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
177.07
-
-
... More
Providing plinth protection 50mm thick in cement concrete 1:3:6 (one Cement : three Sand : six graded stone aggregated 20mm nominal size), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
177.07
-
-
... More
Providing and laying cement concrete 1:4:8 (one cement:Four sand:: Eight graded stone aggregate 40mm ( Forty milimetre) nominal size) machenilcally mixed and curing complete excluding cost of form work in: Foundation , including carriage of all labour equipment and material to various locations through all modes of transportation in all leads and lifts, including all incidental charges and complete as per the entire satisfaction of the Engineer in Charge
94.8
-
-
... More
Providing and laying 100mm thick heavy duty precast cement conrete inter locking paver blocks vibro compacted upto M- 50 grade (NTC or equelvant ISI marked) i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for sepretly), including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
948
-
-
... More
Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) Hindware / cera size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately). Orissa Pattern Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
... More
Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) Hindware / cera with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (1 cement : 1 sand) (Seat and over to be measured and paid for separately) ordinary closet Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
7
-
-
... More
Providing and fixing plastic seat (Solid/Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers : Solid white plastic seat and cover. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
7
-
-
... More
Providing and fixing 100 mm size 'P' or 'S' trap for water closet ( squatting pan)including jointing the trap with the pan and soil pipe in cement mortar 1:1 (1 cement : 1 sand) Sand Cast iron Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing PTMT Coloured / white high density polyethylene / poly propylene 10 litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) .Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing vitreous China wash basin hindware/ cera with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings:-Flat back (i) 630mmx450mm Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing vitreous China bowl pattern urinal Hindware/ cera including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to be measured and paid for separately. :Flat back type of size 430mm x 260mm x 350mm. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
8
-
-
... More
Providing and fixing C.P. stop cocks : 15mm dia Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
17
-
-
... More
Providing and fixing 600mm x 450 mm bevelled edge mirror of superior glass mounted on 6mm thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws 750mm x 20mmm. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing C.P brass bib tap (Superior or heavy type) 15mm dia Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
18
-
-
... More
Providing and fixing C.P. brass angle valve 15mm without Nuts and pipe.15mm nominal bore Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
36
-
-
... More
Providing and fixing C.P. Brass waste for wash basin or sink 32mm dia.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing PVC waste pipe for wash basin 32 mm dia. (A.R.) Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing 100 mm dia chromium plated grating of superior quality for floor, gully or nahani trap Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
18
-
-
... More
Providing and fixing P.V.C connection with brass unions 300/450mm length 15mm nominal bore. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
18
-
-
... More
Providing and fixing Division Plate for Urinals 600mm x 300mm Vitreous China. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
6
-
-
... More
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete.110 mm X 90 mm. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
18
-
-
... More
Providing and fixing PVC water storage tank Sintex( Triple layer) of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level 1000 litres net capacity tank Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i )110 mm dia.
40
-
-
... More
ii) 75 mm dia.
35
-
-
... More
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 110 mm dia.
10
-
-
... More
ii) 75 mm dia.
10
-
-
... More
Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete. a )110 mm dia.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
15
-
-
... More
b) 75mm dia
12
-
-
... More
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 110 mm dia.
20
-
-
... More
ii) 75 mm dia.
15
-
-
... More
Providing and fixing PVC plain double equal branch ISI marked including fixing with approved adhesive etc. complete.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 110 mm dia.
6
-
-
... More
ii) 75 mm dia.
5
-
-
... More
Providing and fixing PVC reducer ISI marked including jointing with approved adhesive etc. complete. 110 mm X 75 mm dia.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
... More
Providing and fixing to wall ceiling and floor galvanised mild steel tubes (Medium grade) tube fitting and clamps including making good the wall, ceiling and floor. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 15mm nominal bore.
125
-
-
... More
ii) 20mm nominal bore.
20
-
-
... More
Providing and laying in trenches, galvanised mild steel tubes (medium grade), tube fittings (earth work in trenches to be measured and paid separately) :- 25mm nominal bore. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
25
-
-
... More
Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40mm nominal bore by providing and fixing tee including cutting and threading the pipes complete. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
... More
Providing and fixing chromium plated brass soap dish with C.P. Brass brackets fixed to wooden cleats with C.P. Brass screws.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
9
-
-
... More
Providing and fixing brass full way valve with wheel.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 15mm dia.
2
-
-
... More
Providing and fixing brass ball valve (horizontal plunger type) including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 15mm dia.
4
-
-
... More
Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) Inside size 800mm x 800mm and 500mm deep including C.I cover with frame. (Light duty single seal pattern - 1) 455 mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) (a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 Sand).
2
-
-
... More
Constructing manhole with R.C.C top slab in 1:2:4 mix in 1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) foundation concrete1:4:8 (1cement : 4 sand : 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement 3 sand) finished with a floating coat of neat cement and making channels in concrete 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size) finished smooth complete including curing and testing.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (i) Inside size 800 mm x 800 mm and 1000 mm deep including C.I cover with frame (Light duty single seal pattern - 1) 455mmx610mm internal dimensions total weight of cover and frame to be not less than 38kg. (Weight of cover 23 kg and weight of frame 15 kg.) (a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1 cement : 3 Sand).
4
-
-
... More
Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (1 cement : 5 sand ) C.I. Cover with frame (light duty ) 355mm x 610mm internal dimensions total weight of cover with frame to be not less than 38kg (weight of cover 23 kg. and weight of frame 15kg) R..C.C top slab with 1:2:4 mix (1 cement : 2 sand : 4 graded stone aggregate 20mm nominal size ) foundation concrete 1:5:10 ( 1cement : 5 sand : 10 graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (1 cement : 3 sand) finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) Inside dimensions 455 mm x 610 mm x 450 mm deep single pipe line.
3
-
-
... More
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete. Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 150 mm dia.
30
-
-
... More
ii)110 mm dia.
20
-
-
... More
Providing and laying cement concrete 1:5:10 (1 Cement: 5 Sand :10 graded stone aggregate 40mm nominal size ) bedding for pipes of the following internal diameters, necessary form work and curing complete :Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 150mm dia.
20
-
-
... More
ii) 110mm dia
20
-
-
... More
Providing and fixing PTMT jet spray of approved quality and colour with one metre tube.Including carriage of all labour equipment and material to various locations through all modes of transportation, all incidental charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
7
-
-
... More
Suppying and fixing C.I. Cover with frame of internal dimension 455mm X 610 recrangular (Light duty single seal pattran -1 the weight of cover with frame to be not less than 38 Kgs) ,including carriage of all labour equipment and material to various locations through all modes of transportation including all incidental charges and complete as per entire satisfaction of the Engineer-in Charge.
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements