Bus Stands Management And Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Bus Stands Management And Development Authority Tender
Civil Works Buildings
Coronavirus COVID 19
Eprocure
Opening Date24 Dec 2019
Closing Date15 Jan 2020
Tender Amount₹ 1,41,40,015
Costs
EMD
₹ 1,59,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of New Bus Stand At Shahpur Distt. Kangra (h.p.)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_BSMDA_33611_1Bid Award Id
ViewTender No
HPBSMDA/EE/(2)/2018 TENDERS (VOL-II)Tender Authority
Bus Stands Management And Development Authority ViewPurchaser Address
-Website
http://http://hpctbsmda.com/page/History
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
(b) Flat surfaces such as soffits of suspended floors, roofs, landing and the like Floors etc. upto 200 mm in thickness
922.48
-
-
(c) Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses in all heights and the like.
151.203
-
-
(d) Sides & soffits of beams,beam haunchings,cantilevers,bressumers and lintels not exceeding 1 mt. In depth in all heights from floor.
613.53
-
-
(e) Stair cases with sloping or stepped soffits excluding landing.
22.5
-
-
(f) Columns, Pillars, posts and Struts Square, rectangular or polygonal in plan.
302.4
-
-
(g) Columns, pillars, posts and struts Circular or curved in plan.
166.7
-
-
(h) Edges of slabs and breaks in floors and walls. Under 20 cm. wide.Edges of slabs and breaks in floors and walls. Under 20 cm. Wide.
248.6
-
-
Providing and laying cement concrete 1:3:6 (1 cement:3 sand:6 graded stone aggregate 40mm nominal size) excluding cost of centring and shuttering including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. in: a) Foundations and plinth
6.8
-
-
b) Walls including attached buttresses, pilasters and their caps and bases and string courses etc. upto floor two level:
34.02
-
-
Providing and laying cement concrete 1.4.8 (1 cement 4 sand : 8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. inin: (a) Foundation and plinth.
83.37
-
-
Providing and laying cement concrete 1:2:4 (1 cement:2 Sand:4 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge :in Foundation and plinth
6
-
-
Providing and laying Machnically Mixed and vibrated cement concrete 1:1.5:3 (One cement :One and half sand : Three graded stone aggregate 20mm.(Twenty milimetre) nominal size) and curing complete excluding cost of form work and reinforcement for feinforced concrete work in up to floor two level , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge in: (a) Foundations, footings, bases of columns and the like and mass concrete.
109.09
-
-
(b) Suspended floor; roofs landing shelves and their supports balconies ,beams, girders, bressumers and cantilevers upto floor two level.
227.83
-
-
(c) Columns, pillars, Posts, and struts up to floor two level
54.94
-
-
(d) Staircases (except spiral stair cases) excluding landing but including preparing of the surface and finishing of nosing upto floor two level.
4.86
-
-
(e) Extra for additional lift of concrete for all R.C.C. work above floor two level
219.75
-
-
Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position complete including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
59508
-
-
Brick work using 1st class common burnt clay building bricks in foundation and plinth level , in cement mortar 1:5 (One cement : five sand), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
4.49
-
-
Brick work in Super-structure above plinth level upto floor two level (first Class Bricks ) in Cement Mortar 1:5 (One cement : five sand) First Class Bricks including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
111.26
-
-
(B) Super structure above floor two level
39.75
-
-
Half brick masonry in common burnt clay building bricks in cement mortar 1:4 up-to floor two levels, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
342.14
-
-
(B) Super structure above floor two level
96.48
-
-
Random rubble masonry/polygonal rubble masonry (uncoursed/brought to courses) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement :Six sand : Twelve graded stone aggregate 20mm (Twenty milimetre) nominal size) at plinth level in Cement Mortar 1:6(One cement : six sand) including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
72
-
-
Stone soling properely hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm (Hundred milimetre) spread thickness (finished work including materials and labour), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
46.8
-
-
Providing and fixing anodised aluminium work for door, window, ventilators and partitions with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips,or with expansion hold fastners includingnecessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etc. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and the directions of Engineer-In-Charge. (a) For doors windows and ventilatiors and glazed partitions frames. (hindalco renukoot /TU 2364 125 mm x 37 mm) including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1008.92
-
-
(b) For shutters of doors windows & ventilators including providing and fixing hinges/pivots and making provisions for fixing of fittings where ever required including the cost of PVC/neoprene gaskets as required (fittings and glazing/panelling shall be paid for separately) (hindalco renukoot) including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
790.05
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etc with PVC/neoprens gasket etc. complete as per the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) (b) Glazing with glass panes of 5.50mm thickness (weight not less than 13.75 kg/ sqm. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
113.15
-
-
Providing and fixing 12 mm thick Phenol bonded (both site )prelaminated commercial board mat finished ISI NO.12823 as approved shade ( superior quality) in aluminium door, window, ventilator shutters and partitions etc with pvc/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer in charge.(cost of aluminium snap beading shall be paid in the basic item) including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
33.33
-
-
Kota stone slab flooring 20 mm (average) thick base of cement mortor 1:4 (1 cement :4 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. 25 mm thick
716.37
-
-
Kota stone slab 25 mm thick in risers of steps,skirting dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 sand) and jointed with greycement slurry mixed with pigment to match the shade of the slabsincluding rubbing and polishing complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
50.68
-
-
Providing & laying spartic ceramic tiles/ vitrified (anti skid) tiles 5.5 mm thick in flooring ( 600x600) laid on a bed of 12 mm thick cement mortar 1:3 ( 1 cement : 3 sand) finished with flush pointing in white cement.+ Providing & fixing wall tiles in skirting 5.5mm thick , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
13.87
-
-
Providing and fixing 8 to 10mm thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalent 600x600mmx10mm manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm thick cement mortar 1:3 (1 cement : 3 sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
68.04
-
-
White/Colored glazed tiles/Dado tiles 8mm thick in flooring, treads of steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1cement:3sand) finished with flush pointing in white cement., including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
413.43
-
-
15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth Cement Mortar 1:4 (1Cement:4 Sand). including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
653.43
-
-
20mm Cement plaster in two coats,backing coat 15mm and finishing coat 5mm thick on rough side of brick/stone masonry walls for interior plastering upto floor two level including arrises,internal roundedangles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth Cement Mortar1:5 (One cement:Five sand). up-to all lead and lifts with grooves as per architectural design, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1369.1
-
-
15mm cement plaster in single coat on fair side of brick/concrete/stone walls for
interior plastering upto floor two level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:5 (One cement:Five sand), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1281.83
-
-
6 mm cement plaster to ceiling in cement mortar 1:3 (One cement : three sand) including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
871
-
-
Steel work welded in built up sections including cutting,hoisting, fixing,in position and applying a priming coat of red lead paint. (a) In trusses and trussed purlins in buildings, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
105.3
-
-
(b) In gratings framed guard bars, ladders, railling,brackets and similar works.
16.68
-
-
Providing and fixing moulded hand rail of M.S. hollow pipe 50mm dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured &paid separetely, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
79.9
-
-
Supplying and fixing rolling shutters of approved make made of 80 mm X 1.25mm M.S laths interlocked together through their entire length and joined together at the end by end locks mounted on specially designed pipe shaft,with brackets side guides and arrangements for inside and outside locking with push pull operation complete but excluding the cost of the top cover and spring. up-to all lead and lifts. -Shutters having width below 3.5 metres, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
15
-
-
Providing and fixing 27.5 centimeter long wire spring grade No.2 for rolling shutters , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing top cover for rolling shutters, Shutters having width below 3.5 metre,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
Providing and fixing ball bearing for rolling shutters up-to all lead and lifts.including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia metre with prepainted limpet and rubber washers complete with all accesoriees as required as per the direction of Engineer-in-charge.including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
496.39
-
-
Providing and fixing ridges or hips 60 cm overall with 0.60mm thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer in Charges. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
66.1
-
-
Providing and fixing valley 60 cm overall 0.60mm thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
72
-
-
Providing & fixing 15 cm wide 45 cm overall semicircular plain G.I.. sheet gutter with iron brackets 40x3mm size bolts & nuts with washers etc. including making necessary connection withrain water pipe complete as per design in 0.63 mm thick Sheet including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
43.6
-
-
Providing and fixing M.S. BP Sheet 1.66 mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-charge (Base members of steel work shall be measured & paid separtely) including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
87.2
-
-
Providing and fixing on wall face PVC (D-Plast/ finlox) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 110mm dia pipes including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
86.4
-
-
Providing and fixing on wall faces PVC (D-Plast/ Finlox) accessories for rain water pipes including filling the joints with approved adhesive complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge: PVC Plain bend 110mm dia
16
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2152.83
-
-
Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2152.83
-
-
Painting two coats(excluding priming coat on new concrete masonry/plaster surfaces with readymixed paint brushing for use on floors to give an even shadeincluding cleaning the surface of all dirt,dust and other foreignmatter and sand papering as required with paint other then white, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2152.83
-
-
Painting two coats (excluding priming coat)on new steel and other metal surfaces with readymixed paint acid resisting brushing to give an even shade including cleaning of all dirt,dust and other foreign matter, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
83.4
-
-
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1849.1
-
-
Preparation of sub grade by dressing to camber(earth work for the cutting involved for sub-grade to be paid for separately depending upon the classification of soil completeed as per HP. PWD specification, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1175
-
-
Consolidation of sub grade with road roller including making good the undulation etc. with earth or quarry soil etc. and re rolling the sub grade completed as per HPPWD specification.including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1175
-
-
Providing ,Laying spreading and compacting stone aggregates of specific sizes( 90 to 45 mm)to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 KN static roller in stages to topper grade and camber, applying and brooming, stone screening / binding material to fill up the interstices of coarse aggregate, watering and compacting to the required density , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. Grading 1 as per Technical Specification Clause 405. By Mechanical Means
88.13
-
-
Providing ,Laying spreading and compacting stone aggregates of specific sizes( 63 to 45 mm)to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to topper grade and camber, applying and brooming, stone screening / binding material to fill up the interstices of coarse aggregate, watering and compacting to the required density, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. Grading 1 as per Technical Specification Clause 405. By Mechanical Means
88.13
-
-
Providing ,Laying spreading and compacting stone aggregates of specific sizes( 53 to 22.4 mm)to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to topper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. Grading 1 as per Technical Specification Clause 405. By Mechanical Means
88.13
-
-
Providing and Applying tack coat with Bitumen emulsion (RS-1) using emulsion pressure distributor at the rate of 0.30 to 0.35 kg per sqm on the prepared non Bituminous surfaces cleaned with Hydraulic broom as per Technical specification clause 503. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1175
-
-
Providing , laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of Type B as per Technical Specification Clause 508. Bitumen (VG-10). including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1175
-
-
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type B Bitumen (VG-10), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1175
-
-
50 mm thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm thick cement concrete 1:2:4 (1 cement:2 sand:4 graded stone aggregate 20 mm nominal size) and top layer of 15 mm thick metallic concrete hardner consisting of mix 1:2 (1 cement hardner mix : 2 stone aggregate 6 mm nominal size) by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (4 parts of cement: 1 part of metallic floor handening compound of approved quality by weight),including finishing complete including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
800
-
-
Providing and laying four courses water proofing treatment with bitumen felt consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 kg per sq .m of area for each course second course of roofing felt type 3 grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cu.dm or 0.006 cu.m) per sq.m. Including preperation of surface excluding grading complete in all leads and lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
81.89
-
-
Providing and fixing steel bars for steps for tank including bending etc.including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and laying granite stone In flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. up-to all lead and lifts 20mm.thick including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
3.81
-
-
Providing and fixing 12mm thick 150mm wide pelmet with 25 mm diametre wooden curtain rods and brackets including fixing 25x3mm M.S. flat at 10 cm. Long and plugs etc. Complete 2nd class indian teak wood up-to all lead and lifts. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
25
-
-
Providing and fixing 25mm diameter curtain rods with brackets, plugs etc. where ever required 2nd class deodar wood up-to all lead and lifts. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
25
-
-
Providing and filling in position blown bitumen in expansion joints up-to all lead and lifts. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
32.5
-
-
Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete. 300x16 mm including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
36
-
-
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete.up-to all lead and lifts (A) 250x10 mm including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
72
-
-
( b) 150x10 mm
150
-
-
Providing and fixing aluminium handle anodized transparent or dyed to required colour & shade with necessary screws etc. complete. (a) 100mm including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
72
-
-
( b) 75 mm
150
-
-
Providing and fixing 100mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete up-to all lead and lifts including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
33
-
-
Providing and fixing bright finished hard drawn hooks and eyes. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. 150mm
52
-
-
WATER SUPPLY & SANITARY INSTALLATIONS Providing and fixing to wall ceiling and floor galvanized mild steel tubes (heavy grade) tube fitting and clamps including making good the wall ceiling and floor ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.s. (a) 15mm nominal bore .I.S.I Marked.
40
-
-
(b) 20mm nominal bore I.S.I
30
-
-
Providing and fixing PVC water storage tank of ISI : 12701 marked, G.I. inlet and outlet connection, 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground level, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. 2000 litres net capacity tank
2
-
-
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) 110 MM dia
350
-
-
(ii)75 MM dia
300
-
-
(iii)50 MM dia for semicircular gutter in expansion joints, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
50
-
-
(iv)150 MM dia for drainage
50
-
-
Providing and fixing P.V.C D Plast Plain bend of required degree complete and jointing with adhesive mixture complete including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) 110 MM dia
50
-
-
(ii)75 MM dia
80
-
-
Providing and fixing P.V.C D Plast Plain Tees medium class and joining with adhesive mixture complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) 110 MM dia
30
-
-
(ii)75 MM dia
40
-
-
Providing and fixing P.V.C D Plast Door bend medium class and joining with adhesive mixture complete ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.including all leads an lifts (I) 110 MM dia
30
-
-
(ii)75 MM dia
40
-
-
Providing and fixing P.V.C D Plast Collar medium class and joining with adhesive mixture complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.(I) 110 MM dia
90
-
-
(ii)75 MM dia
190
-
-
Providing and fixing P.V.C D Plast Cowel medium class and joining with adhesive mixture complete including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) 110 MM dia
10
-
-
(ii)75 MM dia
12
-
-
Providing and laying in trenches, galvanised mild steel tubes (heavy grade), tube fittings (earth work in trenches to be measured and paid separately) , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.:-(a) 15mm nominal size
350
-
-
(b) 20mm nominal size
200
-
-
Providing and fixing G.I unions of following sizes including carriage of material in all leads and lifts confirming of BIS specification , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge..(a) 15mm nominal size
50
-
-
(b) 20mm nominal size
10
-
-
Providing and fixing G.I socket ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. confirming of BIS specification .(a) 15mm nominal size
50
-
-
(b) 20mm nominal size
10
-
-
Providing and fixing G.I elbow of following sizes confirming of BIS specification , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.(a) 15mm nominal size
90
-
-
(b) 20mm nominal size
16
-
-
Providing and fixing G.I Tees of following sizes including carriage of material in all leads and lifts confirming of BIS specification ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.(a) 15mm nominal size
50
-
-
(b) 20mm nominal size
6
-
-
Providing and fixing brass full way valve with wheel, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.:-(a) 15mm nominal size
6
-
-
(b) 20mm nominal size
6
-
-
Providing and fixing PVC clamps ISI marked of approved design with steel screws and
rawal plugs etc. complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.(D-Plast/Finolex) 110 mm dia
10
-
-
(b) 75 mm dia
10
-
-
Providing and fixing PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (D-Plast/Finolex) 110 mm X 75 mm.
10
-
-
Providing and fixing viterous china water closet squatting pan (Indian type W.C. Pan) size 580mm (Earth work, bed concrete , and trap to be measured and paid for separately including all leads and lifts make Hindustan or cira as per the direction of the Engineer -in- charge. orrisa pattern.
6
-
-
Providing and fixing PVC 100mm size 'p' or 's' trap for water closet (Squatting pan) including jointing the trap with the pan and soil pipe in cement mortar 1:1 (one cement one sand) ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
6
-
-
Providing and fixing vitreous China ( Hindustan/ Cera) make wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(One cement : One sand) (Seat and over to be measured and paid for separately), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (I) Ordinary closet
15
-
-
(ii) Anglo Indian Universal closet, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
3
-
-
Providing and fixing in cement mortar 1:3 (1 cement:3 sand), a pair of vitreous China
250mm x 130mmx30mm foot rests for long pattern squatting pan water closet, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
6
-
-
Providing and fixing PTMT Coloured / white automatic flushing cistern ( Hindustan/ Cera make) with a pair of PVC / C.I. or M.S. bracket complete with fittings including PVC syphonic apparatus, mosquito proof lid, PVC union and coupling for connections with inlet, outlet and over flow pipes including cutting holes and making good the same ( over flow pipe to be measured and paid for separately), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.(b) 10 litres capacity
21
-
-
Providing and fixing in position with clamps, etc. 32mm nominal internal diameter galvanised steel tube flush pipe for high level flushing cistern including connecting the flush pipe with cistern and closet and making good the walls and floors, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1
-
-
Providing and fixing in position brass mosquito proof coupling for over flow pipes of 25mm nominal dia over flow pipe tube measured and paid for separetely, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
1
-
-
Providing and fixing plastic seat (Solid type) cover for wash down water closet with C.P. Brass hinges and rubber buffers , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. a) white plastic seat cover
18
-
-
Providing and fixing vitreous China bowl pattern urinal ( Hindustan/ Cera make) including connection the urinal with waste pipe by means of white lead mixed with chopped hemp (waste pipe to bemeasured and paid for separately) ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
15
-
-
Providing and fixing C.P. Brass flush pipe/ spreaders for urinal with fitting such unions ,clamps etc. (all in C.P. Brass) including cutting holes and making good the same. including all leads and lifts. (a) 15mm nominal bore.
12
-
-
(b) 20 mm nominal bore
3
-
-
Providing and fixing divisional plate for urinals 600mmx330mm vitreous china confirming to BIS specification. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
12
-
-
Providing and fixing vitreous china wash basin with single hole for pillar tap with single hole for pillar tap with C.I. or M.S. brackets pained white including cutting holes and making good the same but excluding fitting ( HINDUSTAN or CERA) make, including all leads and lifts. Of HINDUSTAN or CERA make. Flatback 630 x 450 mm size, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
26
-
-
Providing and fixing PTMT waste coupling of approved quality and colour,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 32 mm nominal bore.
26
-
-
Providing and fixing C.P. Brass waste for wash basin or sink,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (a) 32mm dia
26
-
-
Providing and fixing C.P. Bottle trap for wash basin and sink including all lead and lifts. (a) 32mm dia.
26
-
-
Providing and fixing M.I. Union for wash basin or sink,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (a) 32mm dia.
26
-
-
Providing and fixing 100mm sand cast iron grating for gully for , floor or Nahani trap,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
3
-
-
Providing and fixing 600mmx450mm bevelled edge miror of superior glass mounted on 6mm thick A.C.sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
26
-
-
Providing and fixing C.P. Brass Towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. Brass , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (1) 750mm x20mm.
10
-
-
Providing and fixing C.P. Brass bib tap with Capstan head including all leads and lifts. (a) 15mm dia
26
-
-
Providing and fixing C.P. Brass pillar tap with Capstan head ,including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (a) 15mm dia, Swan Neck
21
-
-
Providing and fixing C.P. Brass stop cock including all leads and lifts. (a) 15mm dia,
20
-
-
Providing and fixing 600x120mm glass shelve with C.P brass bracket and guard rail complete fixed to wooden plugs with C.P Brass Screws, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing C.P. Brass angle valve 15mm dia confirming to BIS specification including carriage of material in all leads and lifts.
2
-
-
Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. i) 610 x 510 mm with bowl depth 200 mm.
1
-
-
Supplying and fixing cast iron cover without frame for main holes for frames of internal dimensions 455x610mm rectangular C.I. cover (light duty single seat pattern the weight of cover to be not less than 23 kg. including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing PTMT jet spray of approved quality and colour with 1.5 mtr. Tube, including all leads and lifts.
20
-
-
Providing and fixing P.V.C connection with brass unions 300/450mm length, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. (i) 15mm nominal bore
45
-
-
Construction of manhole with R.C.C top slab in 1:2:4 mix in one cement two sand four graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (one cement four sand eight graded stone aggregate 40mm nominal size), inside plastering 15mm thick with cement mortar 1:3 (one cement three sand)finished with a floating coat of neat cement and making channels in cement concret 1:2:4 (one cement two sand four graded stone aggregate 20mm nominal size ) finished smooth complete including curing and testing. Inside size 800mmx800mm and 1.0metre deep including C.I.Cover with frame [light duty single (Seal) pattern1] 450mmx 610mm internal dimensions total weight of cover and frame to be not less than 38kg. (weight of cover 23kg. And weight of frame 15kg) (a) With 300mm thick walls of squared rubble masonary coursed with hard stones of approved quality in cement mortar 1:3 (one cement three sand), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing spindle fire hydrent with 65mm out let with complete with components, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
Constructing chamber 600mm x 600mm x750 mm inside size for fire hydrants with C.I. surface box 350mmx550mm top and 165mm deep (inside) with chained lid and R.C.C. top slab 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size) 100mm thick foundation concrete 1:5:10(1cement:5sand:10graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement including curing complete:- With 200mm thick walls of brick masonry in cement mortar 1:5(1cement:5sand) , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:5(1cement:5sand) and water tight C.I. cover with frame of 300mmx300mm size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg) square mouth trap 100mmx100mm size P-type, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge. confirming to BIS specification.
3
-
-
Providing 200 mm wide cast iron rungs with chequered or ribbed non-slip surface including fixing in manholes/septic tank with 200mmx200mmx100mm cement concrete 1:3:6(1cement:3sand:6graded stone aggregate 20mm nominal size), including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
3
-
-
Constructing brick masonry for under ground C.I. inspection chamber and bends and common burnt clay building bricks in cement mortar 1:5(1cement:5sand) C.I. cover with frame (light duty) 355mx610mm internal diamensions total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg. ) R.C.C. top slab with 1:2:4mix (1cement:2sand:4graded stone aggregate 20mm nominal size) foundation concrete 1:5:10(1cement:5sand:10graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3(1cement:3sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455mmx610mmx450mm deep single pipe line, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
Constructing RCC under ground inspection chamber in RCC 1:1.5:3, R.C.C. top slab with 1:2:4 mix (One cement:Two sand: Four graded stone aggregate 20mm nominal size) foundation concrete 1:5:10(One cement: Five sand: Ten graded stone aggregate 40mm nominal size) inside plaster 15mm thick with cement mortar 1:3 (One cement: Three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 610mmx610mmx1150mm including cost of reinforcement and form work, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
Cutting holes through existing brick work including making good the same in cement mortar 1:6 (1cement:6sand) per cm depth of cutting: Holes upto and including 400 sq.cm in area, including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
50
-
-
Constructing soak pit 2.5 metre diametre 3.00 metre deep with 45x45cm dry brick honey comb shaft with bricks of class designation 75and soil waste drain pipe 100mm diametre 1.80 metre long as per standard design with F.P.S , including all leads, lifts and carriage of materials and complete in all respect of as per entire satisfaction of the Engineer in charge.
2
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements