Bus Stands Management And Development Authority Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Bus Stands Management And Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 May 2023
Closing Date31 May 2023
Tender Amount₹ 7,42,33,172
Costs
EMD
₹ 5,00,000Document Cost
₹ 5,000Tender Fee
Refer Documents
Summary
Construction Of Hrtc Workshop At Karsog Distt- Mandi (hp)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2023_BSMDA_73291_3Bid Award Id
ViewTender No
HPBSMDA/EE/(2)2021 Tenders Vol-IIITender Authority
Bus Stands Management And Development Authority ViewPurchaser Address
-Website
http://http://hpctbsmda.com/page/History
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm (twenty centimeter) in depth, consolidating each deposited layer by ramming and watering, lead up to all lead lift upto 1.5 m. (one point five meter) including all carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
2643.3
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (a) Foundations, footings, bases of columns, etc. upto plinth level. for mass concrete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
535.16
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (b) Suspended floors, roofs, landings, balconies and access platform, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
792.54
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (c) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc., including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
2320.92
-
-
Centering and shuttering including strutting, propping etc. and removal of form for : - (d) Lintels, beams, plinth beams, girders, bressumers and cantilevers, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
798
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (e) Stairs, (excluding landings) except spiral staircases, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
46.05
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (f) Columns, Pillars, Piers, Abutments, Posts and Struts, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
423
-
-
Centering and shuttering including strutting, propping etc. and removal of form for :- (g) Edges of slabs and breaks in floors and walls. Under 20 cm (twenty centimeter) Wide , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
314
-
-
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- 1:3:6 (one cement isto three coarse sand isto six graded stone aggregate 40 mm forty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
489.9
-
-
"Providing and laying in position cement concrete Mechnically Mixed and vibrated of specified grade excluding the cost of centering and shuttering - All work up to plinth level :- 1:4:8 (one cement isto four coarse sand isto eight graded stone aggregate) 40 mm (forty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
"
249.15
-
-
Providing and laying cement concrete Mechnically Mixed and vibrated of specified grade in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to floor five level, excluding the cost of centering, shuttering and finishing:- 1:3:6 (one cement isto three coarse sand isto six graded stone aggregate 20 mm (Twenty milimeter) nominal size.
1538.4
-
-
Providing and laying in position cement concrete Mechnically Mixed and vibrated of specified grade excluding the cost of centering and shuttering All work up to plinth level- :- 1:2:4 (one cement isto two coarse sand isto four graded stone aggregate) 20 mm (twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
20.85
-
-
Providing and laying design mix cement concrete of M- 30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm (forty milimeter) nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction ofEngineer-in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately. Cement concrete prepared with batch mixing machine, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
520.97
-
-
Providing and laying in position specified grade of reinforced cement concrete Mechnically Mixed and vibrated, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :- 1:1.5:3 (one cement isto one and half coarse sand isto three graded stone aggregate) 20 mm (Twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
386.06
-
-
Reinforced cement concrete Mechnically Mixed and vibrated work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (one cement isto one and half coarse sand isto three graded stone aggregate) 20 mm (twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
453.4
-
-
Reinforced cement concrete work Mechnically Mixed and vibrated in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :- 1:1.5:3 (one cement isto one and half coarse sand isto three graded stone aggregate) 20 mm (twenty milimeter) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
32.81
-
-
Providing steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete, upto floor all levels Thermo-Mechanically Treated bars of grade Fe-500D or more., including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
186250
-
-
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (one cement isto six coarse sand), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
403.39
-
-
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (one cement isto four coarse sand), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
51.03
-
-
Stone soling properely hand packed filling interstics with spalls and consolidating with power road roller to the requested gradient and camber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100mm (one hundred milimeter) spread thickness (finished work including materials and labour), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
498.72
-
-
Supplying, filling, spreading & leveling stone boulders of size range 5 cm (five centimeter) to 20 cm, (twenty centimeter) behind retaining walls, in the required thickness, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
45.93
-
-
Providing and fixing P.V.C. weepholes 100 mm (one hundred milimeter) diameter pipe in brick masonary/plain reinforced concrete abutment, wing walls,retaining wall extended through the full width of the structures with slope of 1 (V) :- 20 (H) towards drawing face complete as per drawing and technical specification clauses 614,709,1204.3.7, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
350
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:- 733 and IS:- 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) : (a) For fixed portion Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
1002.1
-
-
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:- 733 and IS:- 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately):- (b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 (Fifty) micron), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
728.62
-
-
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm (five milimeter) thickness (weight not less than 12.50 kg/ sqm), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
95.04
-
-
Providing and fixing 12 mm (twelve milimeter) thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:-12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge. Pre-laminated particle board with decorative lamination on both sides, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
76.84
-
-
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm (one point four milimeter) in both directions with wire of dia 0.63 mm (zero point sixty three milimeter) all complete. With 12 mm (twelve milimeter) alumimium U beading , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
108
-
-
Kota stone slab flooring 20 mm (twenty milimeter) (average) thick base of cement mortor 1:4 (one cement isto four course sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab. including rubbing and polishing complete. 25 mm (twenty five milimeter) thick including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
623.6
-
-
Kota stone slab 20 mm (twenty milimeter) thick in risers of steps,skirting dado and pillars laid on 12 mm (twelve milimeter) (average) thick cement mortar 1:3 (one cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs including rubbing and polishing complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
57.78
-
-
Providing and laying Vitrified tiles in Size of Tile 600x600 mm (Six hundred into six hundred milimeter) sizes and 10 mm (Ten milimeter) thick with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, (Kajaria, NITCO, Somany, orient, RAK, Johnson & Johnson) in all colours & shade, in skirting, riser of steps, over 12 mm (Twelve milimeter) thick bed of cement mortar 1:3 (one cement isto three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
72.63
-
-
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm (Three hundred into three hundred milimeter) or more and 10 mm (Ten milimeter) thick of 1st quality conforming to IS :- 15622, of approved make, (Kajaria, NITCO, Somany, orient, RAK, Johnson & Johnson) in colours White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (One Cement isto four Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc. complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
44.01
-
-
White/Colored glazed tiles/Dado tiles 8mm (eight milimeter) thick in skirting, risers of steps and dados laid on a bed of 12 mm (twelve milimeter) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement. (300x600mm) (three hundred into six hundred milimeter ), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
180.28
-
-
15 mm (fifteen milimeter) cement plaster in two coats under layer 12 mm (twelve milimeter) thick cement plaster 1:5 (one cement isto five coarse sand) and a top layer 6 mm (six milimeter) thick cement plaster 1:5 (one cement isto five coarse sand) finished rough with sponge , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4992.65
-
-
6mm (six milimeter) Cement Plaster to ceiling. In cement mortar 1:3 (one cement isto three sand) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
792.54
-
-
Providing and fixing plain multipurpose cement board (Hight pressure steam cured) with suitable screws for cement particle board in ceiling etc. complete (frame work to be paid seperatately). 6 mm (six milimeter) thick Cement fiber board as per IS:- 14862 , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
44.01
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete, is all height including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
105697.04
-
-
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
34725.77
-
-
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete in :-Hot finished seamless type tubes , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
22219.23
-
-
Providing and fixing bolts including nuts and washers complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
235.2
-
-
Providing and fixing moulded hand rail of M.S. hollow pipe 50 mm (fifty milimeter) dia welded in straight lenght over M.S. flat at top of vertical balusters including one coat of red oxide priming coat complete (M.S. flat & balusters of railings shall be mesaured & paid separetely , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
114.4
-
-
"Providing and fixing 0.60mm (zero point sixty milimeter) thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimeter) dia metre with prepainted limpet and rubber washers complete with all accesoriees as required , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
920.85
-
-
Providing and fixing ridges or hips 60 cm (sixty centimeter) overall with 0.60mm (zero point sixty milimeter) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating plus back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts & nuts 6mm (six milimeter) dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
50.84
-
-
Providing and fixing valley 60 cm (sixty centimeter) overall 0.60mm (zero point sixty milimeter) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimeter) dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
9.14
-
-
Providing & fixing 15 cm (fifteen centimeter) wide 45 cm (forty five centimeter) overall semicircular plain G.I. sheet gutter with iron brackets 40x3mm (forty into three milimeter) size bolts & nuts with washers etc. including making necessary connection withrain water pipe complete as per design in 0.63 mm (zero point sixty three milimeter) thick. Sheet including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
47
-
-
Providing and fixing M.S. BP Sheet 1.66 mm to 2mm (one point sixty six to two milimeter) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete (Base members of steel work shall be measured & paid separtely) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
221.63
-
-
Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/sqm including filling the joints with approved adhesive complete. 110mm (one hundred ten milimeter) dia pipes, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
78.3
-
-
Providing and fixing on wall faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain bend 110mm (one hundred ten milimeter) dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
24
-
-
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS :- 13592 Type A, including jointing with seal ring conforming to IS :- 5382, leaving 10 mm (ten milimeter) gap for thermal expansion:-110 mm (one hundred ten milimeter) Shoe, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
24
-
-
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm (fifty into fifty into fifty milimeter) hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (one cement isto four coarse sand) and making good the wall etc. complete:- 110 mm (one hundred ten milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
48
-
-
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5785.19
-
-
Applying priming coat on new concrete/masonry/asbestos cement/plastered surfaces after and including preparing the surface by thoroughly cleaning oil,grease,dirt and other foreign matter and sand papering as required with Readymixed primer , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5785.19
-
-
Painting two coats(excluding priming coat on new concrete masonry/ plaster surfaces with readymixed paint brushing for use on floors to give an even shadeincluding cleaning the surface of all dirt,dust and other foreignmatter and sand papering as required with paint other then white, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5785.19
-
-
Painting two coats (excluding priming coat)on new steel and other metal surfaces with readymixed paint acid resisting brushing to give an even shade including cleaning of all dirt,dust and other foreign matter, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
79.59
-
-
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paper smooth complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5785.19
-
-
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm (twenty two point five centimeter)depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
2604.85
-
-
Supplying Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density 90 mm to 45 mm size (Ninty milimeter to forty five milimeter) stone aggregate G I,including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
651.21
-
-
Supplying Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density 63 mm (sixty three milimeter to 45 mm (forty five milimeter) size stone aggregate G II, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
651.21
-
-
50 mm (fifty milimeter) thick cement concrete flooring with metallic concrete hardner topping under layer of 35 mm (thirty five milimeter) thick cement concrete 1:2:4 (one cement isto two sand isto four graded stone aggregate) 20 mm (twenty milimeter) nominal size) and top layer of 15 mm (fifteen milimeter) thick metallic concrete hardner consisting of mix 1:2 (one cement isto two) hardner mix isto two stone aggregate) 6 mm (six milimeter) nominal size by volume with which metallic hardening compound of approved quality is mixed in the ratio 4:1 (four isto one) parts of cement isto One part of metallic floor handening compound of approved quality by weight) including finishing complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
281.16
-
-
Providing and laying four courses water proofing treatment with bitumen felt consisting of first and third courses of blown or / and residual bitumen applied hot at 1.45 kg per sq .m of area for each course second course of roofing felt type 3 grade 1 (hessian base self finished bitumen felt) and fourth and final course of stone grit 6 mm (six milimeter) and down size or pea sized gravel spread at 6 cu.dm or 0.006 cu.m) per sq.m. Including preperation of surface excluding grading complete, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
44.01
-
-
Providing and fixing steel bars for steps for tank including bending etc. , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and laying granite stone In flooring 20mm (twenty milimeter)(average) thickness base of cement mortar 1:3(one cement isto three sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. up-to all lead and lifts 20mm (twenty milimeter)thick including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
14.49
-
-
Providing and fixing 18 mm (eighteen milimeter) thick, 150 mm (one hundred fifty milimeter) wide pelmet of coir veneer board ISI marked IS :- 14842, including top cover of 6 mm (six milimeter)coir veneer board, nickle plated M.S. Pipe 20 mm (twenty milimeter) dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm (twenty five into Three milimeter) M.S. Flat 10 cmlong fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm (one hundred into forty milimeter into forty milimeter)on both inner side of pelmet and rawl plugs 75 mm (seventy five milimeter)long etc. all complete.
53
-
-
Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets :- 25 mm (twenty five milimeter) dia (heavy type), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
53
-
-
Providing and filling in position blown bitumen in expansion joints up-to all lead and lifts, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
33.9
-
-
"Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nutsscrews etc. complete. 300x16 mm (three hundred into sixteen milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. "
26
-
-
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete.up-to all lead and lifts (a) 250x10 mm (two hundred fifty into ten milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
116
-
-
Providing and fixing aluminium tower bolts (berrel type) anodized trans parent or dyed to required shade and colour with screws etc. complete.up-to all lead and lifts (b) 150x10 mm (one hundred fifty into ten milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
28
-
-
Providing and fixing aluminium round shape handle of outer dia 100 mm (one hundred milimeter) with SS screws etc. complete Powder coated minimum thickness 50 micron aluminium, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
116
-
-
Providing and fixing aluminium round shape handle of outer dia 100 mm (one hundred milimeter) with SS screws etc. complete Powder coated minimum thickness 50 micron aluminium, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.(b) 75 mm (Seventy five milimeter)
28
-
-
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :-1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
26
-
-
Providing and fixing bright finished hard drawn hooks and eyes. 150mm, (one hundred fifty milimeter) including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
70
-
-
Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, (a) 15mm (fifteen milimeter) nominal outer dia pipes. , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
60
-
-
Providing and fixing to wall ceiling and floors galvanized mild steel tubes (medium grade) tube fitting and clamps including making good the wall ceiling and floors ISI marked as per HP.PWD specification, (b) 20mm (twenty milimeter) nominal outer dia pipes. including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge
65
-
-
Providing, fixing and laying in trenches galvanized mild steel tube . (Medium grade) tube fitting (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, (a) 15mm (Fifteen milimeter) nominal outer dia pipes, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
60
-
-
Providing, fixing and laying in trenches galvanized mild steel tube . (Medium grade) tube fitting (earth work in trenches to be measured and paid for separately) as per HP.PWD specification, ((b) 20mm (twenty milimeter) nominal outer dia pipes. including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
65
-
-
Making connection of galvanized steel distribution branch with galvanized mild steel main line 20 to 40 (twenty to forty) millimeters nominal bore, cutting and threading the pipes complete, as per HP.PWD specification, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
20
-
-
Providing and fixing water meter and stop cock in GMS tube of 15 (fifteen) millimeters nominal bore 1including necessary fittings such as mild steel galvanized jam nut sockets etc. cutting and making long screws complete, as per HP.PWD specification, including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all incidental charges.
2
-
-
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge (a) 1216 (16 mm OD) pipe
60
-
-
Providing and fixing Polyethelene-Aluminium Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge . (b) 1620 (20 mm (twenty milimeter) O.D. pipe).
65
-
-
Providing and fixing PE-AL-PE- composite internal seal compression fittings as per IS-15450-2004 for hot water supply such as tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fixing including cutting and making good the walls etc.(This type of fitting to be used forcold/ hot water supply only). , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge. (a) Equal Tees 1216 (16 mm (sixteen milimeters) O.D. pipe)
45
-
-
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge (a) 1216 (16 mm (Sixteen milimeters) O.D. pipe)
45
-
-
Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with trenching, refilling and testing of joints complete as per direction of the engineer in charge (b) 1620 (20 mm (twenty milimeter ) O.D. pipe ).
75
-
-
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS :- 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
8000
-
-
Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive complete, as per HP.PWD specification, (a) 110 (one hundred ten) millimetres nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
25
-
-
Providing and fixing PVC Supreme or its equivalent, waste and ventilating pipes jointed properly with solution approved adhesive complete, as per HP.PWD specification, (b) 75 mm (seventy five millimetres) nominal size. millimetres nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
30
-
-
Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD specification (a) 110 (one hundred ten) millimetres nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
25
-
-
Providing and fixing PVC holder bat clamps of approved design PVC pipes embedded in and including cement concrete blocks 10*10*10cm (ten into ten into ten centimeter) of 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (twenty millimeter) nominal size) and cost of cutting holes and making good the wall etc. as per HP.PWD specification (b) 75 mm(seventy five milimeter nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
20
-
-
Providing and fixing PVC ISI marked floor traps of self-cleaning design including fixing with approved adhesive complete including cost of cutting and making good the walls and the floors: as per HP.PWD specification, (a) 110x 90 mm(one hundred ten into ninety milimeter) size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
20
-
-
Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm thick bolts and nuts complete including fixing with approved adhesive etc. complete. (a) 110 mm (one hundred ten millimetres) nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing PVC single equal branch with oval access door , ISI marked insertion rubber washer 3 mm (three milimeter) thick bolts and nuts complete including fixing with approved adhesive etc. complete. (b) 75 mm(seventy five milimeter) nominal size. nominal size, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm (three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete (a) 110 mm (one hundred ten millimetres) dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
8
-
-
Providing and fixing PVC door bend with oval acces door, insertion rubber washer 3 mm (three milimeter) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete (b) 75 mm (seventy five milimeter) dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. (a) 110 mm (one hundred ten millimetres) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
Providing and fixing PVC single equal branch plain ISI marked including fixing with approved adhesive etc. complete. (b) 75 mm dia (seventy five milimeter) nominal size. , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
8
-
-
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. (a) 110 mm (one hundred ten millimetres) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
15
-
-
Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete. (b) 75 mm (seventy five milimeter) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
20
-
-
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. (a) 110 mm (one hundred ten millimetres) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete. (b) 75 mm (seventy five milimeter) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing PVC 'P' or 'S' trap for water closet ( squatting pan) ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. complete. (a) 110 mm (one hundred ten millimetres) dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
6
-
-
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :- (a) 110 mm (one hundred ten millimetres) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
8
-
-
Providing and fixing PVC cowl including carriage of materials within all leads and lifts :- (b) 75 mm (seventy five milimeter) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
8
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm (one hundred ten millimetres) sand cast Iron P or S trap, 10 (Ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS :- 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm ( five hundred eighty into Four hundred forty milimeter) with integral type foot rests, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
3
-
-
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 (Ten) litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm (forty milimeter) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :- (a) W.C. pan with ISI marked white solid plastic seat and lid, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
3
-
-
Providing and fixing 10.00 (Ten) ltr.capacity PVC low level duel flushing cistern CERA catlogue No. 2603 or equivalenet with a pair of brackets with fittings such as lead valve, less syphon, 15mm (fifteen milimeter) nominal size PVC ball valve with polythene float, PVC handle, union and coupling for connection with inlet, outlet and overflow pipes 40 mm dia PVC flush bend with cistern and closet & over flow pipe to be paid for separately), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing first quality of white shade viterous China bowl pattern urinal including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp(waste pipe to be measured and paid for separately) including carriage of materials within all leads and lifts :- (a) Flat back type (430mm x 260mmx 350mm) ( four hundred thirty milimeter into two hundred sixty milimeter into three hundred fifty milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:-13983 with C.I. brackets and stainless steel plug 40 mm, (forty milimeter) including painting of fittings and brackets, cutting and making good the walls wherever required Kitchen sink without drain board 610x510 mm(six hundred ten into five hundred ten milimeter) depth 200 mm ( two hundred milimeter)
1
-
-
Providing and fixing C.P. brass flush pipe / spraders for urinal with fittings such as unions, clamps etc.( all C.P.) including cutting holes and making good the same. including carriage of materials within all leads and lifts :- (a) 15 mm (fifteen milimeter) nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing viterous China division plate for urinal of size 600x300 mm ( six hundred into three hundred milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
8
-
-
Providing and fixing viterous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts :- (i) Flat back :- (a) 550 X 400 mm( five hundred fifty into four hundred milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing Hindware Vitreous China padestal for wash basin complete recessed at the back for receiption pipe anf fittings, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing brass stop cock of approved quality 15 mm (fifteen milimeter) nominal bore , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
P/F 32 mm (thirty two milimeter)dia lead waste pipe for wash basin , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing & fixing 100mm (one hunderd milimeter) dia C.P. grating for floor or nahani/gully/floor trap , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing 600mmx450mm ( six hundred milimeter into four hundred fifty milimeter) bevelled edge mirror of superior glass mounted on 6mm( six milimeter) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washer , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing 600mmx120 mm ( six hundred into one hundred twenty milimeter) glass shelf with C .P brass and guard rail complete, fixed to wooden plugs with C. P brass screw, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing toilet paper holder including carriage of materials within all leads and lifts :- (a) C.P. brass :-, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
6
-
-
Providing and fixing C.P. brass towel rail (heavy duty ISI marked IS :- 8931 and 8934) complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws :- 600 X 20 mm ( six hundred into twenty milimeter), including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing chromium plated brass soap dish with C.P. brass brackets fixed to wooden cleats with C.P. brass screws , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
1
-
-
Providing and fixing CP brass bib tap (heavy duty ISI marked IS:- 8931 & 8934) of jaquar with capstan head :- 15mm (fifteen milimeter) dia, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing CP brass pillar tap with capstan head (heavy duty ISI marked IS:8931 & 8934) :- 15mm ( fifteen milimeter), dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing C.P.brass angle valve (heavy duty ISI marked IS:8931 & 8934) :- 15mm ( fifteen milimeter) dia , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
10
-
-
Providing and fixing PTMT fancy bib cock with spout no .1391 of approved quality and colour 15 mm ( fifteen milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing PTMT push cock with reducer of approved quality and colour 20 mm x15 mm ( twenty milimeter into fifteen milimeter) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing PTMT angle cock of approved quality and colour 15 mm ( fifteen milimeter) with flange , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing CP or PTMT jet spray with 1 (One) m tube of approved quality and colour , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
6
-
-
Providing and fixing P.V.C connection with brass unions 300/450mm length:- (i) 15mm ( fifteen milimeter) nominal bore, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
12
-
-
Construction of manhole with R.C.C top slab in 1:2:4 mix in (one cement two sand four graded stone aggregate) 20mm (twenty milimeter) nominal size), foundation concrete 1:4:8 (one cement four sand eight graded stone aggregate) 40mm ( forty milimeter) nominal size, inside plastering 15mm ( fifteen milimeter) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concret 1:2:4 (one cement isto two sand isto four graded stone aggregate) 20mm ( twenty milimeter) nominal size finished smooth complete including curing and testing. Inside size 800mmx800mm ( eight hundred milimeter into eight hundred milimeter) and 1.0 (One) metre deep including C.I.Cover with frame [light duty single (Seal) pattern1] 450mmx 610mm (four hundred fifty milimeter into six hundred ten milimeter) internal dimensions total weight of cover and frame to be not less than 38kg. (weight of cover 23kg. And weight of frame 15kg) (a) With 300mm (three hundred milimeter) thick walls of squared rubble masonary coursed with hard stones of approved quality in cement mortar 1:3 (one cement isto three sand) , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
Providing and fixing spindle fire hydrent with 65mm ( sixty five milimeter) out let with complete with components , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Constructing masonry Chamber 60x60x75 cm ( sixty into sixty into seventy five centimeter) inside, in brick work in cement mortar 1:4 (one cement isto four coarse sand) for sluice valve, with C.I. surface box 100mm ( one hundred milimeter) top diameter, 160 mm ( one hundred sixty milimeter) bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate) 20mm ( twenty milimeter) nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (one cement isto five fine sand isto ten graded stone aggregate) 40 mm ( forty milimeter) nominal size and inside plastering with cement mortar 1:3 (one cement isto three coarse sand) 12 mm (twelve milimeter) thick, finished with a floating coat of neat cement complete as per standard design :- With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Providing and fixing stoneware gully trap grade ‘A’ complete with C.I. grating, brick masonry chamber in cement mortar 1:5 (one cement isto five sand) and water tight C.I. cover with frame of 300mmx300mm (three hundred milimeter into three hundred milimeter) size (inside) the weight of cover to be not less than 4.53kg and frame to be not less than 2.72kg) square mouth trap 100mmx100mm (one hundred milimeter into one hundred milimeter) size P-type confirming to BIS specification, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
5
-
-
Constructing brick masonry for under ground C.I. inspection chamber and bends and common burnt clay building bricks in cement mortar 1:5 (one cement isto five sand) C.I. cover with frame (light duty) 355mx610mm (three hundred fifty five meter into six hundred ten milimeter) internal diamensions total weight of cover with frame to be not less than 38 kg. (weight of cover 23 kg. and weight of frame 15 kg. ) R.C.C. top slab with 1:2:4 mix (one cement isto two sand isto four graded stone aggregate) 20mm (twenty milimeter) nominal size foundation concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate) 40mm (forty milimeter) nominal size inside plaster 15mm (fifteen milimeter) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 455mmx610 mmx450mm (four hundred fifty five mlimeter) into six hundred ten into four hundred fifty milimeter) deep single pipe line including carriage of material in all leads and lifts.
5
-
-
Constructing RCC under ground inspection chamber in RCC 1:1.5:3 (one cement isto one and half sand isto three graded stone aggregate), R.C.C. top slab with 1:2:4mix (one cement isto two sand isto four graded stone aggregate 20mm (twenty milimeter) nominal size foundation concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate) 40mm (forty milimeter) nominal size inside plaster 15mm (fifteen milimeter) thick with cement mortar 1:3(one cement isto three sand) finished with a floating coat of neat cement on walls and bed concrete etc. complete inside dimensions 610mmx610mmx1150mm (six hundred ten into six hundred ten into one thousand one hundred fifty milimeter) including cost of reinforcement and form work ,, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Cutting holes through existing brick work including making good the same in cement mortar 1:6 (one cement isto six sand) per cm depth of cutting: Holes upto and including 400 sq.cm (four hundred square centimeter) in area, including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
100
-
-
Constructing soak pit 2.5 metre diametre 3.00 (three) metre deep with 45x45cm (forty five into forty five centimeter) dry brick honey comb shaft with bricks of class designation 75and soil waste drain pipe 100mm (one hundred milimeter)diametre 1.80 ( one point eighty) metre long as per standard design with F.P.S , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (one cement isto two coarse sand isto four graded stone aggregate) 20 mm ( twenty milimeter) nominal size cement plastered on both sides with cement mortar 1:3 (one cement isto three coarse sand), finished with a floating coat of neat cement and making necessary channels for the drain etc. complete For pipes 100 to 250 mm (one hundred to two hundred fifty milimeter) diameter , including all leads, lifts and carriage of materials, complete in all respect of as per entire satisfaction of the Engineer in charge.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements