Bus Stands Management And Development Authority Tender

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 10 sq. mm + 1 X 6 sq. mm earth wire

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wireset, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:- Double door-4 way

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way , Double door.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door.

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Exhaust Fan, Heavy duty, 300 mm sweep

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Square/round LED Panel Light 18/20W Surface

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50Hz, complete with all accessories, connections, testing etc. as required: of Approved Make Square LED Panel Light 36W Surface

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make LED Batten Light 20W

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Armoured cable 95 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required. Armoured cable 95 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Armoured cable 6 sq. mm (twin core)

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Double pole. Cat-A.

Supplying and erection of 3 stepped steel tubular swaged and welded pole of suitable length and dia. to be fixed up to a required planting depth below G/L in a hole of excavation about 30 cm dia. and of suitable depth, to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- (b). Overall length 8 meter, with planting depth 1.5 m, length of sections 4.5 m, 1.75m and 1.75m (bottom, middle and top respectively), outer dia and thickness of sections 127mmx4.5mm, 101.6mmx3.65mm and 76.1mmx3.25mm (bottom, middle and top respectively) with approximate weight 84 Kg.

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:- 40 mm dia. G.I. pipe, heavy class

Supplying and fixing of cubical type indoor type lower mounted fixed type M.S.C.R.C sheet panel for 12 compartment meter board chargeable new electricity meters. The size of the panel 1850MM(H)X 1900MM(B) cubical panel shall be febricated with 2MM thick C.R.C.A steel sheet for loard bearing structure and 1.6/1.2 MM C.R.C.A steel sheet for doors covers and partition of panel and it required accessories locks, Gasket, Hinges, Cable ties and all other miscellaneous items. the panel consisting of 100amp 4P 25KA MCCB with O/L & S/C 1 Nos. Spreader Terminals 4p "CVS" 2 Nos, Extended Rotary Handle "CVS" 1 Nos, LED Indication Lamps R, Y, B 3 Nos, 6amp 1p 10ka MCB "ACTI-9" 3 Nos, Neutral Link 1 Nos. with Outgoing B-Part:- 32amp 2p 10ka MCB 12 Nos, Space for new Chargable Energy Meter 12 Nos. Aluminum/copper flat with crunnet densty of 1 A/SQ.MM in AL & 1.6A/ SQ.MM in CU. Along with all the requried accessories for fixing and mounting. i/c Busbars: Copper:For Phase: 1R X 20 X 03 MM. CU. Or equl.For Neutral: 1R X 20 X 03 MM. CU. Or equl.For Earth: Bolted Earthing. the material used L&T or Schneider make.

Supplying and fixing of main LT panel size: 1850MM(H) X 1050MM(W) Cubical Pannal shall be febricated with 2mm thick CRCA steel sheet for load Bearing structure & 1.6/1.2mm CRCA steel sheet for doors, covers & partition of the panel stand hight shall be extra 200MM of angle iron 40x40x5MM, 250 4P 36ka MCCB with O/L & S/C Protaction "CVS" 1 Nos, Spreader Terminals 4p "CVS" 2 Nos, Extended Rotary Handle "CVS" 1 Nos, LED Indication Lamps R, Y, B 3 Nos, 6amp 1P 10ka MCB "ACTI-9" 3 Nos, Neutral Link 1 Nos, Space for Energy Meter 3 Phase 1 Nos. with Outgoing B-Part MCCB: 100Amp 4P 25KA MCCB with O/L & S/C Protaction "CVS" 1 Nos, Spreader Terminals 4p "CVS" 2 Nos, Extended Rotary Handle "CVS" 1 Nos, with Outgoing C-Part MCB: 32amp 2P 10Ka MCB "Acti-9" 2 Nos, i/c Febrication Bus bar & Labour: Cubical Panel shall be febricated with 2mm thick CRCA steel sheet for load Bearing structure & 1.6/1.2mm CRCA steel sheet for doors, covers & partation of the panel. Aluminum/copper flat with crunnet densty of 1 A/SQ.MM in AL & 1.6A/ SQ.MM in CU. Along with all the requried accessories for fixing and mounting. (Busbars: Aluminum:For Phase: 1R X 50 X 06 MM. Al. Or equl.For Neutral: 1R X 50 X 06 MM). Al. Or equl.For Earth: 1R X 25 X 06 MM. GI. Or equl. the material used L&T or Schneider make.

S/F of Exuast Fan shutter for 300 mm Exaust fan

Supplying and fixing of computer point with modular switch & Socket 2 Nos. Switch & 3 Nos. modular socket complete in all respect connection etc. as required.

supply and fixing of LED Bulk head 10 watt fitting with all accessories including connection testing as requred. As approved by the Engineer in-charge of great white or its equivalent make.

Supplying and fixing of New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP Opening seperate driver compartment with IP66 protection and impact resistance of IK07 with 10KV Built-in Surge Protection Device. as per cat No. ENDURAPEARLPLUSSL90WLED757PASYTOPCASTHO, w.e.f. 1st Jan-2020

supply and fixing of Energy Saving, envionmental friendly, long life, exclusive innovative die-cast aluminium IP66 Flood light,able for highlighting architectural facade and general purpose lighting as per Havell's cat No. AIRISFLS150W LED 757 PSYMLTG as per Havell's price list w.e.f 1,July,2020.