Bharat Sanchar Nigam Limited Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
Bharat Sanchar Nigam Limited - BSNL Tender
Civil And Construction
Building Construction
Electrical and Electronics
Solar Installation and Products
Electrical Works
Eprocure
Opening Date20 Dec 2024
Closing Date12 Jan 2025
Tender Amount₹ 19,75,52,459
Costs
EMD
₹ 29,75,525Document Cost
₹ 1,770Tender Fee
Refer Documents
Summary
C/o 50 Bedded Critical Care Block 20 Bedded Trauma Centre And Mortuary Building
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_BSNL_220580_1Tender No
EE/BSNL/CD/KLU/DB/Year 2024-25/06Tender Authority
Bharat Sanchar Nigam Limited ViewPurchaser Address
-Website
http://etenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
C o 50 Bedded Critical Care 20 Bedded Trauma Centre Bldg at Manali Kullu Phase-I Civil and Elect wk
Construction of 50 Bedded Critical Care Block 20 Bedded Trauma Centre and Mortuary Building at Manali Distt. Kullu HP Phase-I Civil and Electrical Work
Construction of 50 Bedded Critical Care Block 20 Bedded Trauma Centre and Mortuary Building at Manali Distt. Kullu HP Phase-I Civil and Electrical Work
BOQ Items
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50 m and lift up to 1.5m, as directed by Engineer-in-Charge.
-
-
-
... More
a) Ordinary rock
285
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
-
-
-
... More
a) All kinds of soil.
227
-
-
... More
Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains not exceeding 1.5m in width or 10 sqm on plan including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50m.
-
-
-
... More
a) Ordinary rock
45
-
-
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth up to 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : a) All Kinds of Soil.
-
-
-
... More
(i) Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia
180
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m.
750
-
-
... More
Extra for every additional lift of 1.5 m or part thereof in excavation /banking excavated or stacked materials.
-
-
-
... More
a) All kinds of soil.
200
-
-
... More
Supplying and filling in plinth with local fine sand under floors, including watering, ramming, consolidating and dressing complete.
120
-
-
... More
Sub-Head : Concrete Work
-
-
-
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
a) 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
25
-
-
... More
b) 1:5:10 (1 cement : 5 coarse sand(zone-III) : 10 graded stone aggregate 40 mm nominal size)
297
-
-
... More
Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing :
-
-
-
... More
a) 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
39
-
-
... More
b) 1:5:10 [ 1 Cement : 5 coarse sand : 10 graded brick aggregate 40 mm nominal size]
50
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form work for :
-
-
-
... More
a) Retaining walls, return walls, walls (any thickness) including attached pilasters, buttresses, plinth and string courses fillets, kerbs and steps etc..
340
-
-
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation leveling and dressing and finishing the top smooth.
155
-
-
... More
Providing and laying in position plum concrete with hard stone boulders in retaining walls etc up to all height and all level, in required size and shape etc; with cement concrete of mix 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) using 15% hard stone plums/boulders of size 150 mm to 300 mm, excluding cost of centring and shuttering, all complete as per the direction of Engineer-in-Charge.
129
-
-
... More
Sub-Head : Reinforced Cement Concrete
-
-
-
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
390
-
-
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :
-
-
-
... More
a) 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)
342
-
-
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size).
978
-
-
... More
Centering and shuttering including strutting, propping etc. and removal of form for all heights:
-
-
-
... More
a) Foundations, footings, bases of columns, etc. for mass concrete.
682
-
-
... More
b) Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
392
-
-
... More
c ) Suspended floors, roofs, landings, balconies and access platform.
4288
-
-
... More
d) Shelves (Cast in situ).
60
-
-
... More
e) Lintels, beams, plinth beams, girders, bressumers and cantilevers.
3686
-
-
... More
f) Columns, Pillars, Piers, Abutments, Posts and Struts.
2230
-
-
... More
g) Stairs, (excluding landings) except spiral-staircases.
150
-
-
... More
h) Edges of slabs and breaks in floors and walls
-
-
-
... More
i) Under 20 cm wide
100
-
-
... More
j) Weather shade, Chajjas, corbels etc., including edges.
75
-
-
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete at all level
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500 D or more.
344600
-
-
... More
Smooth finishing of the exposed surface of R.C.C. work with 6 mm thick cement mortar 1:3 (1 Cement : 3 fine sand)
3903
-
-
... More
Sub-Head : Brick Work
-
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
20
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
a) Cement mortar 1:6 (1 cement : 6 coarse sand)
160
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
a) Cement mortar 1:4 (1 cement :4 coarse sand)
1202
-
-
... More
Extra for providing and placing in position 2 Nos. 6mm dia. M.S. bars at every third course of half brick masonry.
1202
-
-
... More
Brick edging 7cm wide 11.4cm. deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
150
-
-
... More
Sub-Head : Stone work
-
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level with :
-
-
-
... More
a) Cement mortar 1:6 (1 cement : 6 coarse sand).
108
-
-
... More
Providing and laying 25 cm thick composite stone masonary with stone facing of plain ashlar masonary with Rewalsar or equivalent hard stone in superstructure (above plinth level up to floor five level) in cement mortar 1:6 (1 cement : 6 coarse sand) including pointing with cement mortar 1:2 (1 white cement : 2 stone dust) and concrete backing with cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) on inner face of walls including centering shuttering and proping complete.
430
-
-
... More
Supplying & back filling with well graded stone boulders of size 150 mm to 300 mm behind retaining wall complete as per the directions of the Engineer-in-charge. (Note :- 30% deductions in measurements shall be made for voids).
75
-
-
... More
Providing and fixing 110mm dia P.V.C pipe (working pressure 4Kg/Sqcm) confirming to IS:13592 Type-A in retaining walls for use as weep holes, laid to required slope complete as per the directions of the Engineer in charge.
40
-
-
... More
Sub-Head : Cladding
-
-
-
... More
Providing and fixing 18mm thick gang saw cut mirror polished premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
a) Granite stone slab colour black, Cherry/Ruby red
-
-
-
... More
i) Area of slab over 0.50 sqm.
620
-
-
... More
b) Granite stone slab all colour and texture except black, Cherry/ Ruby red
-
-
-
... More
i) Area of slab over 0.50 sqm
230
-
-
... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.
-
-
-
... More
a) Granite work
436
-
-
... More
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/Granite / stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
15
-
-
... More
Providing and fixing Ist quality ceramic rectified glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of size not less than 15 inch as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
2643
-
-
... More
Sub-Head : Wood and PVC Work
-
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia. & length (hold fast lugs or dash fastener shall be paid for separately).
-
-
-
... More
Second class teak wood
6.25
-
-
... More
Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc.
-
-
-
... More
a) Sal wood
4.64
-
-
... More
Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured).
10
-
-
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.
-
-
-
... More
a) 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
220
-
-
... More
Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured).
108
-
-
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed withC.P. brass screws and PVC sleeves etc., wherever necessary complete :
-
-
-
... More
a) 25 mm dia
45
-
-
... More
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
666
-
-
... More
Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 35 kg and door width up to 700 mm) with necessary accessories and screws etc. complete.
24
-
-
... More
Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/ nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.
232
-
-
... More
Providing and fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868)transparent or dyed to required colour and shade with necessary screws etc. complete.
-
-
-
... More
a) Twin rubber stopper
148
-
-
... More
Providing & fixing glass panes with wooden Fillets nails,screw etc. in Wooden doors, windows, clerestory windows all complete with : (Note: Beading shall be paid seperately)
-
-
-
... More
a) 4.0 mm thick glass panes.
55
-
-
... More
Providing and fixing bright /matt finished Stainless Steel sliding door bolts of approved quality & make with necessary screws etc all complete as per direction of Engineer-in-Charge.
-
-
-
... More
a) 300x16 mm
13
-
-
... More
b) 250x16 mm
98
-
-
... More
Providing and fixing bright /matt finished Stainless Steel tower bolt of approved quality & make with necessary screws etc all complete as per direction of Engineer-in-Charge..
-
-
-
... More
a) 250x10 mm
26
-
-
... More
b) 200x10 mm
196
-
-
... More
Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete as per direction of Engineer-in-Charge.
-
-
-
... More
a) 125 mm
296
-
-
... More
Providing and fixing fly proof stainless steel grade 304 wire gauge with average width of aperture 1.40 mm in both directions with wire of dia 0.50 mm to uPVC windows, doors & ventilators all complete including uPVC beading as per manufacturer's specification and direction of of Engineer-in-charge.
165
-
-
... More
Providing and fixing glazing in uPVC windows, all complete with uPVC beading as per manufacturer's specification and direction of of Engineer-in-charge. ( Note :- uPVC beading to be paid in basic frame item). (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured).
-
-
-
... More
a) Toughned & reflective ( Anti glow) glass panes
-
-
-
... More
i) 6 mm thick.
297
-
-
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head,
-
-
-
... More
comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion
-
-
-
... More
(if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod pf approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit
-
-
-
... More
with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately.
-
-
-
... More
Ventilator Casement window single panel with or without fixed panel with S S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles.
-
-
-
... More
a) Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
-
-
-
... More
i) Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 meter).
30
-
-
... More
ii) Using R3 series with frame (98mm & above) x (40mm & above) & both glazed and fly screen sash (30mm & above) x (55mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system, (Height upto 1.8m).
300
-
-
... More
Providing & fixing panelling tongue and groove or other pattern on verticle /round /horizontol i/c ceiling etc. of approved design/ pattern over wooden frame work with nails/screws/adhesive as per the direction of Engineer-in-Charge. (The frame work shall be paid saperatly)
-
-
-
... More
a) 12 mm thick Canadian Pine wood .
310
-
-
... More
Providing and fixing Fire resistant Wooden Perforated Acoustical wall panels of width 128mm, thickness of 15mm and length of 2440mm or as required by the Architect / approving engineer, made of a High Density Fibre board of approved make to substrate with laminated facing as per the approved shade / species and finish and a melamine balancing layer over the reverse side. The board shall have a special perforated pattern where the visible surface has a (“Helmholtz” fluted perforation of 2mm width and 28mm visible panel) each and to be fixed over 40mm Rockwool laid in wall & fixed with GI clamp and tissue paper complete.
130
-
-
... More
Providing and fixing Roller blinds of VISTA/MARVEL/NOVA or equivalent of approved shade and Brand , single shade, pelmet including fixing all complete as per manufacturer specifications and direction of Engineer-in-charge.
150
-
-
... More
Providing and fixing Wood Plastic Composite panel( WPC) of width 192mm, thickness of 15mm and length of 2990 mm or as required by the Architect / approving engineer, of MEGA STAR or equivalent including fixing all complete as per the directions of Engineer-in-charge.
250
-
-
... More
Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including:
-
-
-
... More
a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.
-
-
-
... More
b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.
-
-
-
... More
c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite
-
-
-
... More
panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.
-
-
-
... More
The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.
870
-
-
... More
Sub-Head : Steel Work
-
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
41700
-
-
... More
Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.
22
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters.
-
-
-
... More
80x1.25 mm M.S. laths with 1.25 mm thick top cover.
26
-
-
... More
Providing and fixing ball bearing for rolling shutters.
6
-
-
... More
Extra For Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished welded type tubes.
4170
-
-
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
... More
a) In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works.
4200
-
-
... More
Providing and fixing stainless steel (Grade 304) railing/grill made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge.( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)
6500
-
-
... More
Sub-Head : Flooring
-
-
-
... More
Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigments etc., complete.
210
-
-
... More
Providing and laying full body Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Vitrified tiles Matt/Antiskid finish of size
-
-
-
... More
Size of Tile 600 x 1200 mm
2112
-
-
... More
Providing and laying full body Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08%and conforming to IS: 15622, of approved brand & manufacturer in all colours and shade in skirting, riser of steps/ Wall Cladding, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints(Payment for grouting of joints to be made separately).
-
-
-
... More
Size of Tile 800x800 mm/600x1200 mm
400
-
-
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade(0.10 kg of hardener and 0.20 kg of resin per kg), including filling/grouting and finishing complete as per direction of Engineer-in-charge.
-
-
-
... More
Size of Tile 800x800 /600X1200 mm
3187
-
-
... More
Providing and laying full body Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, (Payment for grouting of joints to be made separately).
-
-
-
... More
Size of Tile 800x800 mm
675
-
-
... More
P/F tiles of size 400x 400x 12 mm vitrified Rustic/ Matt/antiskid tiles of approved make in parking floor & vehicular ramp including setting in position to the required level and line over a bed of 20 mm average thick cement mortar 1:4 (1 cement : 4 coarse sand), having joint thickness/goove of 5mm , including filling of joints/grove with same/ matching epoxy filler in grooves etc. complete as per direction of Engineer-in-charge.
770
-
-
... More
Providing and fixing 2.0mm thick homogeneous antistatic PVC sheet flooring in approved colour, shade and pattern on a smooth and damp proof base using rubber based adhesive of approved quality and manufacture including rolling with light woodedn roller weighing about 5.0 Kg all complete as per the direction of the Engineer in charge.
78
-
-
... More
Providing and fixing copper strip of size 25 x 0.50mm under antistatic PVC sheet flooring complete as per the direction of Engineer in charge.
100
-
-
... More
Sub-Head : Roofing
-
-
-
... More
Providing and fixing precoated galvalume iron profile sheets of Jindal (Colouron)/ Tata steel (Durashine)/Bhushan make (size, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm + 0.05 %, total coated thickness with zinc coating 120 gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches while transportation and should be supplied in single length upto 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM
1390
-
-
... More
seal, complete upto any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
-
-
-
... More
Providing and fixing precoated galvalume steel sheet of Jindal (Colouron)/ Tata steel (Durashine)/Bhushan make, roofing accessories 0.50 mm + 0.05 % total coated thickness, Zinc coating120gsm as per IS: 277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
... More
a) Ridges plain (500 - 600mm).
60
-
-
... More
b) Flashings/ Aprons.( Upto 600 mm)
20
-
-
... More
c) Gutter (600 mm over all girth)
139
-
-
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild
-
-
-
... More
steel item (galvanised @ 80 gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm,
-
-
-
... More
spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge.
-
-
-
... More
a) With 16 mm thick beveled tegular mineral fibre Antimicrobial false ceiling tile confirming to ISO 5 (class 100) specifications
1540
-
-
... More
Sub-Head : Finishing
-
-
-
... More
12 mm cement plaster of mix :
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
3200
-
-
... More
15 mm cement plaster on rough side of single or half brick wall of mix :
-
-
-
... More
a) 1:6 (1 cement: 6 coarse sand)
1770
-
-
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete :
-
-
-
... More
a) New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
7595
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade :
-
-
-
... More
a) New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).
200
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
a) Two or more coats on new work.
445
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
-
-
-
... More
a) Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.
729
-
-
... More
French spirit polishing :
-
-
-
... More
a) Two or more coats on new works including a coat of wood filler.
310
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
4000
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
4000
-
-
... More
Wall painting with acrylic plastic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour.
-
-
-
... More
a) Two coats
405
-
-
... More
Sub-Head : Road Work
-
-
-
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per manufacturer's specifications & direction of Engineer in-Charge.
-
-
-
... More
80mm thick Cement concrete paver block of M-40 grade with approved colour, design & pattern.
800
-
-
... More
Sub-Head : Sanitary Installations
-
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required
-
-
-
... More
a) White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
10
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
a) W.C. pan with ISI marked white solid plastic seat and lid
21
-
-
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
... More
a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
8
-
-
... More
a) Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern
3
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
... More
a) White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps
24
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-
-
-
-
... More
a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.
8
-
-
... More
Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.
32
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
... More
a) Kitchen sink without drain board
-
-
-
... More
i) 610x510 mm bowl depth 200 mm.
6
-
-
... More
Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :
-
-
-
... More
a) Size 600x450x200 mm
6
-
-
... More
Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube up to 1 metre long with S.S. triangular plate to European type W.C. of quality and make as approved by Engineer-in-charge.
21
-
-
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
a) Semi rigid pipe
-
-
-
... More
i) 32 mm dia
49
-
-
... More
ii) 40 mm dia
12
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
32
-
-
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
32
-
-
... More
Providing and fixing toilet paper holder :
-
-
-
... More
a) Vitreous china
31
-
-
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms.
18
-
-
... More
Providing and Fixing PVC soil waste and vent pipes of pressure 6Kg/sqcm. including jointing with approval solvent.
-
-
-
... More
a) 110 mm Dia Pipes
452
-
-
... More
Providing and fixing galvanised Iron holding down clamps for SWR PVC /sand cast iron/centrifugally cast (spun) iron pipes and fixing with galvanised iron screwed rodwith nuts , bolts and anchor bolts fastners in the ceiling complete in all respect.
-
-
-
... More
a) For 110 mm diameter.
280
-
-
... More
Providing and fixing plain bend of required degree.
-
-
-
... More
a) 110 mm dia (SWR PVC).
70
-
-
... More
Providing and fixing Door bend of required degree.
-
-
-
... More
a) 110 mm dia (SWR PVC).
20
-
-
... More
Providing and fixing single equal plain junction of required degree.
-
-
-
... More
a) 110x110x110 mm (SWR PVC)
40
-
-
... More
Providing and fixing single equal junction with acess door of required degree.
-
-
-
... More
a) 110x110x110 mm (SWR PVC)
20
-
-
... More
Providing and fixing terminal guard:
-
-
-
... More
a) 110 mm (SWR PVC)
10
-
-
... More
Providing and fixing Collar:
-
-
-
... More
a) 110 mm (For SWR PVC Pipe):
90
-
-
... More
Providing and fixing PVC Floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :
-
-
-
... More
a) 110 mm inlet and 110 mm outlet
70
-
-
... More
Providing and fixing Stainless Steel (SS) 304 grade wall mounted towel ring square shape 157 mm long, 445 mm wide and 569 mm height with concealed fittings arrangement of Jaiquar/Kohler/Hindware or equivalent , weighing not less than 560 gms.
44
-
-
... More
Providing and fixing Stainless Steel (SS) 304 grade towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of Jaiquar/Kohler/Hindware or equivalent all complete as per direction of Engineer-in-Charge.
-
-
-
... More
a) 600 mm long towel rail with total length of 520 mm, width 88 mm and effective height of 50 mm, weighing not less than 500 gms.
15
-
-
... More
Providing and fixing 100 mm Dia stainless steel grating with frame (with or without hole) .
107
-
-
... More
Sub-Head : Water Supply
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall
-
-
-
... More
a) 20 mm nominal outer dia. Pipes.
150
-
-
... More
b) 25 mm nominal outer dia .Pipes.
320
-
-
... More
c) 32 mm nominal outer dia .Pipes.
50
-
-
... More
d) 40 mm nominal outer dia .Pipes.
20
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
a) 15 mm nominal outer dia .Pipes.
100
-
-
... More
b) 20 mm nominal outer dia .Pipes.
300
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work
-
-
-
... More
a) 32 mm nominal outer dia. Pipes.
50
-
-
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete :
-
-
-
... More
a) 25 to 40 mm nominal bore
1
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) Gate Valve in Chlorinated Polyvinyl Chloride (CPVC) pipe etc. complete (New work) :
-
-
-
... More
a) 25 mm nominal bore
18
-
-
... More
b) 20 mm nominal bore
10
-
-
... More
c) 32 mm nominal bore
4
-
-
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
a) 15 mm nominal bore
6
-
-
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
a) 45 cm length
-
-
-
... More
i) 15 mm nominal bore
210
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
... More
a) 100 mm diameter
10
-
-
... More
Providing and filling sand of grading zone V or coarser grade all- round the CPVC pipes in external work.
-
-
-
... More
a) 32 mm diameter pipe
50
-
-
... More
Providing and fixing CPVC Union in CPVC pipe including cutting and threading the pipe and making long screws etc. complete (New work)
-
-
-
... More
a) CPVC Union 20 mm
20
-
-
... More
b) CPVC Union 25 mm
35
-
-
... More
c) CPVC Union 32 mm
6
-
-
... More
d) CPVC Union 40 mm
4
-
-
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
12000
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931:
-
-
-
... More
a) 15 mm nominal bore.
36
-
-
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
a) 15 mm nominal bore.
38
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
a) 15 mm nominal bore.
20
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
a) 15mm nominal bore
210
-
-
... More
Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.
10
-
-
... More
Providing and fixing Jaiquar/Kohler/Hindware or equivalent Soap Dish holder ,SS 304 Stainless Steel, Brushed Steel Finish, 12.3cm x 12.15cm x 4.65cm LBH, easy to use Ergonomic Design, 23kg Load Bearing Capacity with conealed fitting arrangements.all complete as per direction of Engineer-in-charge.
44
-
-
... More
Providing and fixing C.P. brass Sink Mixer of approved quality as per direction of Enginner in charge.
-
-
-
... More
a) 15 mm nominal bore
6
-
-
... More
Sub-Head : Drainage
-
-
-
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete :
-
-
-
... More
a) 200 mm diameter
170
-
-
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design:
-
-
-
... More
a) 200 mm diameter S.W. pipe
160
-
-
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :
-
-
-
... More
a) 100x100 mm size P type
-
-
-
... More
i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
10
-
-
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2coarse sand : 4 graded stone aggregate 20 mm nominal size),foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
a) Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg(weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
15
-
-
... More
Extra for depth for manholes
-
-
-
... More
a) Size 90x80 cm
-
-
-
... More
i) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
-
-
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design :
-
-
-
... More
a) With 20x20 mm square bar
12
-
-
... More
Making connection of drain or sewer line with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete :
-
-
-
... More
a) For pipes 100 to 250 mm diameter
1
-
-
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.
-
-
-
... More
a) With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
-
-
... More
Sub-Head : Aluminium Work
-
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and
-
-
-
... More
the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
a) For fixed portion
-
-
-
... More
i) Powder coated aluminium (minimum thickness of powder coating 50 micron)
3000
-
-
... More
b) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately).
-
-
-
... More
i) Powder coated aluminium (minimum thickness of powder coating 50 micron)
230
-
-
... More
Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS:12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
... More
a) Pre-laminated particle board with decorative lamination on both sides.
70
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
a) With float glass panes of 8 mm thickness (weight not less than 20 kg/sqm)
40
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg., for doors, including cost of cutting floors ,embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.
-
-
-
... More
a) With stainless steel cover plate minimum 1.25 mm thickness.
4
-
-
... More
Providing and fixing Brass 100 mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete.
4
-
-
... More
Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary screws etc. complete.
-
-
-
... More
a) Anodized (AC 15) aluminium
30
-
-
... More
Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer-in-charge
-
-
-
... More
a) Powder coated minimum thickness 50 micron aluminium
8
-
-
... More
Sub-Head : Water Proofing
-
-
-
... More
Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:
-
-
-
... More
i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.
-
-
-
... More
ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.
-
-
-
... More
iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area.
-
-
-
... More
iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm).
288
-
-
... More
Electrical Work
-
-
-
... More
SUB HEAD-I (Interna Wiring)
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C
541
-
-
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
-
-
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
800
-
-
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
400
-
-
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
a) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
400
-
-
... More
b) 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire
200
-
-
... More
c ) 2 X 10 sq. mm + 1 X 6 sq. mm earth wire
100
-
-
... More
d) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire
50
-
-
... More
e) 4 X 16 sq. mm + 2 X 6 sq. mm earth wire
200
-
-
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
a) 20 mm
200
-
-
... More
b) 25 mm
200
-
-
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/PVC conduit as required.
-
-
-
... More
a) 1x1.5 sq. mm
50
-
-
... More
b) 2x1.5 sq. mm
100
-
-
... More
c ) 3x1.5 sq. mm
100
-
-
... More
d) 4x1.5 sq. mm
100
-
-
... More
e) 5x1.5 sq. mm
100
-
-
... More
f) 6x1.5 sq. mm
100
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
76
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
89
-
-
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 nos. of 3 pin 5/6 A modular socket outlet and 2 nos. of 5/6 A modular switch, connections etc. as required.
29
-
-
... More
S/Fixing hexagonal fan box of size 150 mm dia made outof 16 SWG MS sheet including 12mm dia MS rod in the U shape with its vertical legs bent horizontally at the top at least 19 cm on either side and bound to the top reinforcement of the roof at the time of casting i/c S/F 3 mm thick phenolic laminated sheet at the bottom complete as reqd.
143
-
-
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
143
-
-
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
a) 1 or 2 Module (75mmX75mm)
10
-
-
... More
b) 3 Module (100mmX75mm)
2
-
-
... More
c) 4 Module (125mmX125mm)
2
-
-
... More
d) 8 Module (125mmX125mm)
2
-
-
... More
e) 12 Module (200mmX150mm)
2
-
-
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
a) 5/6 amps switch
43
-
-
... More
b) 3 pin 5/6 amp socket outlet
43
-
-
... More
c) Telephone Socket outlet.
11
-
-
... More
d) RJ-45 Jack with Cat 6
27
-
-
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, Unarmored Telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
1 Pair
100
-
-
... More
2 Pair
100
-
-
... More
4 Pair
100
-
-
... More
SUB HEAD-II (Distribution System)
-
-
-
... More
Supplying and fixing following way, horizontal type SPN , sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with metal door, tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator) (Make-Havells -Metallica )
-
-
-
... More
a) 12Way SPN Double Door ( CAT No-DHDNSHODAW012 )
7
-
-
... More
Supplying and fixing following way, horizontal type TPN sheet steel Double Door, MCB distribution board, 415 volts, on surface/ recess, complete with metal door, tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/ RCCB/ Isolator)
-
-
-
... More
a) 6 way (8 + 18), Double door (Make: Havells DHDNTHCDRW06) )
1
-
-
... More
b) 8 way (8 + 24), Double door (Make: Havells DHDNTHCDRW08 )
8
-
-
... More
Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
a) 5 amps to 32 amps, 240 volts Single pole.
272
-
-
... More
b) Double Pole 6-32A
7
-
-
... More
c) 63A Four Pole
9
-
-
... More
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
a) 25 Amps
4
-
-
... More
b) 40 Amps
3
-
-
... More
Supplying and fixing following rating, Four pole, (Threee phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. asrequired.
-
-
-
... More
a) 63 Amps
9
-
-
... More
S/F Following rating MCB power protected unit suitable for operation on 230V single phase AC supply complete with all accessories i/c making interconnection etc as required.
-
-
-
... More
a) 20A
1
-
-
... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.
9
-
-
... More
SUB HEAD-III (Earthing )
-
-
-
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories,and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
... More
Supplying and laying 25 mm X 5 mm G.I strip on surface or in recess etc as required.
30
-
-
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
100
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%