Bhakra Beas Management Board Tender

Providing and fixing ( PPGL) precoated painted galvalume sheet roofing (size, shape and pitch of corrugation as approved by Engineer-in-charge) The end rib shall have anti cappillary groove and return leg. The steel sheet must be having yield strength of 550 MPa ( Fy= 550 MPa) metallic coated with Zinc- Aluminium alloy ( i.e. 55% Al, 43.4%Zinc, 1.6% Si-Zincalume) AZ150 ( Min. 150 bm/mm2 total on both sides), pre painted with super Durable Polyster XRW quality paint includes inorganic infrared reflective pigment. The sheet confirms to general requirement of AS/NZS 2728 type 4/ IS 15965 class 3 durability and gloss value of 25% -40%. should be supplied in single length upto 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (b) 0.60 mm (+ 0.05 %) thick

Providing and fixing mineral fibre false ceiling tiles at heights upto 4 mtr. With 16 mm thick beveled tegular mineral fibre Anti-microbial false ceiling tile of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflection 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main Trunners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm .Centre to center along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. Providing and fixing ply-wood (4mm) ceiling Providing and fixing 5mm thick asbestos sheets Ceiling Chapter-rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. Providing and fixing ply-wood (4mm) ceiling Providing and fixing 5mm thick asbestos sheets Ceiling Chapter-

Dismantling conglomerate floor 25 mm to 50 mm thick without conc. Base

Providing and laying vitrified floor tiles in different sizes in light colour shades made using Soluble Salt Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement: 4 fine sand), complete. (Soluble salt Print Penetration should be up to 1 to 2 mm after the tiles are fired & polished). (A) Size 600x600 mm

8" thick hollow block masonry 1: 5 in Super structure

Scraping. a) white wash and colour wash.

Cement plaster 12.5 mm thick in 1 : 4

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two coats to get required finish

Distempering with acrylic washable oil bound distemper of approved manufacture two coats over one priming coat to give an even shade.

Removing door and window (steel or wood) with chowkhat by making necessary recesses in walls when the wall not to be dismantled :- a)      door of area 3 sqm and below

Removing door and window (steel or wood) with chowkhat by making necessary recesses in walls when the wall not to be dismantled :-b) window of area 3 sqm and below (Including Ventilators & Excluding Joinery 2- W2)

Providing and fixing M.S. round or square bars at required spacing in wooden frames of windows and clearstory windows.

Factory manufactured solid flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position. (Code: IS 2202-1(1999): C) Decorative with teak facing on both sides edges lipped with teak with laminated core. (iv) 35 mm thick

Wire gauze deodar wood door shutter without springs housed in chowkats (Single Leaf) a) 35 mm thick

Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make. (b) Glass panes 4mm or 10.75 kg/sqm expaceliy 0.4sqm of area.

Providing and fixing deodar wood beading in door and window chowkats with iron screws, fixing position, complete as per design and shape required (50mm x 12mm)

Applying pink primer or aluminum priming coat on wood work including preparation of surface knotting and stopping etc.

Applying priming coat with metal primer on new steel or wood work including preparation of surface.

Painting two coat with synthetic enamel paints in all shades on wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Providing and fixing M.S pressed steel shutter with frame for cupboard made up of 20 gauge M.S sheet pressed and fold to required size as per approved drawing with 3 No. ISI Marked M.S heavy weight bult hinges 9100 mm ) on each panel ,2 No ISI marked oxidized M.S sliding door bolt 250 mm long with nut and screw as shown in drawing and fixing the shutter frame to required space with 150 x10 mm nuts & bolts/Rawl plug and applying two coats of synthetic animal paint of approved quality over one coat of approved steel primer etc. complete as per direction of Engineer- In-Charge.

Cement concrete 1:3:6 with a) stone ballast or shingle ii) mixing by mechaincal means using concrete mixer volumetric type (ii) Mixing by mechnical means using conc. Mixer volumetric type

Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 200 x 300 mm, 100x200mm, 200x200mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Providing and Fixing helical door spring 150 mm (superior quality ) including necessary screw complete b)Iron helical spring

Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge ) complete in all respect. (a)   (i) C.P. brass Bib cock foam flow without flang

Butt Hinges (all Item) ISI market)Anodize of Aluminium mat finish Handles e-iv) For window 100x10 mm

Butt Hinges (all Item) ISI market)Anodize of Aluminium mat finish Handles :- e-i) For doors 250x10mm

Butt Hinges (all Item) ISI market)Anodize of Aluminium mat finish Handles :- b-i) For Doors 125 mm with plate 175 mm x 32 mm

Butt Hinges (all Item) ISI market)Anodize of Aluminium mat finish Handles :- b-ii) For windows 100 mm with plate 150 mm x32 mm

Providing and fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS 1868 ) transparent of died to required color with nuts and screws etc Complete 300mm x 16mm

Providing and fixing Polyethelene-Aluminium- Polyethelene (PE-AL-PE) Composite Pressure Pipes conforming to IS - 15450 U.V. stabilised with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C including all special fittings of composite material (engineering plastic blend and brass inserts wherever required ) e.g. elbows , tees, reducers, couplers & connectors etc. with clamps at 1.00 m spacing including testing of pipes complete as per direction of the engineer in charge. (b) 1620 (20 mm o/d) pipe

Providing and fixing in position Chinaware Indian Orisa water closet size 580x440 mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI makred including cost of PVC long bend 32 mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing jet spray with 2’-6” long PVC pipe with C.P. Brass nut

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect

Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect. viii) Size 630mm x 500mm (above counter oval)

Providing and fixing in position gully traps fixed in cement concrete 1:4:8 complete with Grating 150mm x 150mm, cover and frame clear opening 300mm x 300mm and out of side size 30mm x 330mm and chamber including cost of all bricks work in cement morter 1:5 cement concrete 1:2:4 in coping around cover and frame etc. with three coats of black bitumastic superior paint of approved manufacture on all C.I. work as per standard design minimum depth of water should be 150 mm with a minimum seal 50mm. a) 100mm internal Diametre S.W.gully trap with H.C.I. grating and cast iron cover weighing approximately 7.26 kg. and frame clear opening 300mm x 300mm and out of side size 330mm x 330mm

Providing, Laying , fixing & jointing of P.V.C.Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. (ii) 75 mm o/d pipe of 10 Kgf ./ Sqcm

Providing, Laying , fixing & jointing of P.V.C.Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.(iv) 110 mm o/d pipe of 10 Kgf ./ Sqcm

Providing and fixing in position best Indian make soap dish fixed into wall with C.P. Brass screws and complete in all respects including cutting and making good the walls etc.

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. 1) Triple Layer Tanks

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100 volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular junction Boxes (Four way PVC 1½" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface):- 1 (a) Wiring fan point (Without fan box)

(ii) Wiring light point

(iii) Wiring call-bell point

(v) Wiring 6Amp. wall socket point

(vi) Wiring 16/20 Amp. Power plug control unit.

(viii) Wiring light point with double control switch.

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's: (A)    MINIATURE CIRCUIT BREAKERS: Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- (ii) MCB Single Pole 6-32amp. (10kA, Curve-C)

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position. C) Tees angles & channel

Furnishing and Placing Reinforced/ Prestressed cement concrete in superstructure as per drawing and Technical Specification (d) For T-beam & slab -including centering and shuttering (i) Height up to 5m