State Agricultural Marketing Board Tender
Bidassist allows us to explore new opportunities across the whole world so as to support the growth of the business. It is designed in such a manner that if we need any kind of information about any government e-tender the Himachal Pradesh government has posted on its website, Bidassist provides the same in a very hassle-free manner. As BidAssist is designed as a very user-friendly website which helps us find the specific Himachal Pradesh etender we are looking for.
State Agricultural Marketing Board Tender
Eprocure
Opening Date16 Sep 2021
Closing Date18 Oct 2021
Tender Amount₹ 54,55,01,108
Costs
EMD
₹ 54,55,000Document Cost
₹ 10,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2021_HPAMB_52355_1Bid Award Id
ViewTender No
HMB-EC-Tender-11/92Tender Authority
State Agricultural Marketing Board ViewPurchaser Address
-Website
http://https://www.hpsamb.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration etc., complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
4690.3
-
-
... More
Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
378.85
-
-
... More
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-inCharge. With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
120.6
-
-
... More
Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, up to plinth level complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.
517.87
-
-
... More
Providing and layin Mechanically mixed & vibraed cement concrete 1:2:4 (1cement :2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work In foundation and plinth,including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
565.93
-
-
... More
Providing and laying reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. up to plinth level and as directed by Engineer Incharge.
675.22
-
-
... More
The concrete finish with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. (The panel shuttering work shall be paid for separately).
13557.9
-
-
... More
Supplying, laying of Polyvinyl chloride sheet 400 micron thick including cost of material, Labour, Lead etc.,complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.(for Main Block Flooring)
4207.35
-
-
... More
Supplying, laying of Polyvinyl chloride sheet 400 micron thick including cost of material, Labour, Lead etc.,complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.(for raod Work)
660
-
-
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.complete as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.
4207.35
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
1889.25
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
6938.63
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
7316.18
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Flat surfcaes such as soffits of suspended floor, roofs, landings and the like, floors etc. upto 200 mm in thickness complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
10096.88
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landings as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
44.91
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions etc. including attached pillasters buttresses, plinth and string cources and the like etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
2755.78
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .“(Note :- Cement content considered in this item is @ 340 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
3230.94
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .“(Note :- Cement content considered in this item is @ 340 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level
4363.24
-
-
... More
Providing and laying Standardised Pavement Quality Concrete mix M-40 grade with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. completeas per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. Excess/less cement used as per design mix is payable/ recoverable separately). etc., complete.
132
-
-
... More
Providing Tor steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
945013.66
-
-
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand): 4 graded stone aggregate 12.5mm nominal size) etc., complete. including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
286.8
-
-
... More
Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with : Cement mortar 1:6 (1 cement : 6 coarse sand) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
194.2
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
440.88
-
-
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in : Cement mortar 1:3 (1 cement : 3 coarse sand) etc., complete.,including carriage of material within all leads and lifts as per direction of Engineer-in-charge as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
2582.04
-
-
... More
12 mm (six millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
5620.99
-
-
... More
12 (Tweleve) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:4(One cement: four sand) complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials through all modes of transportation with all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
6529.84
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
503.41
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
1243.55
-
-
... More
Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
2931.26
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
294.84
-
-
... More
Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width(0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board, complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.. 75 mm overall thickness partition with 12.5 mm thick double skin fire rated board conforming to IS: 2095: part I
50.97
-
-
... More
Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the innerside to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for toprail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
26.78
-
-
... More
Providing and fixing factory made door frame (single rebate) made out of single piece extruded solid PVC foam profile with homogenous fine cellular structure having smooth outer integral skin having 62 mm width & 32 mm thickness, frame will be mitred & Jointed with self driven self tapping screws of size 38 mm x 4 mm & PVC solvent cement, including fixing the frame to wall with suitable dia & length anchor fastener complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) and as directed by Engineer Incharge, including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
84.15
-
-
... More
Providing and fixing 35 mm thick (thirty five milimetre) factory made flush door shutter non-decrative phenol bonded termite resistant and water proof core board with frame of first class hard wood and well match commercial three ply veneer with vertical grain or cross band and face veneeer both face of door IS No.2202 (two thousand two hundred two) of kit ply/Alpro comtax as per Arch drawing as per HPPWD specification 1990 volume-1 includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
51.66
-
-
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length complete as per HP.PWD specification 1990 Volume-1 including carriage of materials, labour tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. ( hold fast lugs or dash fastener shall be paid for separately). Second class teak wood
0.73
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
a) 300X16mm
23
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.: a).200x10 mm
38
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and complete as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.: a) 150*10 mm
38
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
a) 100 mm
38
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
a) 75 mm
38
-
-
... More
Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
23
-
-
... More
Providing and fixing bright finished brass hard drawn hooks and eyes : 150mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government. hooks and eyes : 150mm
15
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
2519.45
-
-
... More
Providing and applying Ceiling White washing with lime to give an even shade : .New work (three or more coats)complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
144.74
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
11180.9
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
11170.1
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
499.26
-
-
... More
Providing and laying 10mm thick vitrified floor tiles size of 600 x 600mm with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
586.79
-
-
... More
Providing and laying 8mm thick Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
82.67
-
-
... More
Providing and fixing 6mm thick Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by EngineerinCharge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
260.99
-
-
... More
Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
70.88
-
-
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. and as directed by Engineer Incharge at site.
815.09
-
-
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m² etc.,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
4957.33
-
-
... More
Providing and fixing M.S BP Sheet 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer .,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
221.89
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
207190.93
-
-
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all .,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
8294.34
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
6522.96
-
-
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture etc. complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
936
-
-
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
154.16
-
-
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m² etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
308.32
-
-
... More
Supplying and Providung Pre moulded Joint filler, 25 mm thick for expansion joint including all cost 0f materials and labours etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
515.04
-
-
... More
Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working pressure not less than 4.5 kg/Sq cm including filling the joints with approved adhesive complete. Weep holes 110mm dia pipes etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
118.8
-
-
... More
Providing and fixing on walll faces PVC (D-Plast) accessories for rain water pipes including filling the joints with approved adhesive complete PVC Plain Bend 150mm dia etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
6
-
-
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
72
-
-
... More
Providing and fixing ball bearing for rolling shutters.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
10
-
-
... More
Fencing with R.C.C. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with G.I. staples on wooden plugs or G.I. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of R.C.C. posts, struts, earth work and concrete to be paid for separately) :Payment to be made per metre cost of total length of barbed wire used.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
2000
-
-
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality Rectangular Shape 600X450 mm Internal dimensions.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
3
-
-
... More
Drilling and Grouting of 32mm dia holes in rock for Rock Bolt including cost of all machinery , labouretc.,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
7480
-
-
... More
Providing 75mm dia Drainage Holes including drilling and Pvc Pipe etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
262.5
-
-
... More
Supplying laying of drainage composite for use behind walls, between two different fills, alongside drains of road, below concrete lining of canals etc. Geocomposite for planar drainage, realized by thermobonding a draining core in extruded monofilaments with two filtering nonwoven geotextiles that may also be working as separation or protecting layers. The draining three dimensional core will have a “W” configuration as longitudinal parallel channels. Minimum thickness to be 7.2mm, with two filtering UV stabilized polypropylene nonwoven geotextile of minimum thickness of 0.75mm having pores of 150 micron and tensile strength of 8.0 kN/m that will be working as separation or protecting layer, geocomposite having in plane flow capacity of 2.1 L / (m.s) at hydraulic gradient of 1.0 & 20 kPa pressure and tensile strength of 18 kN/m , with mass per unit area of 740 gsm, supplied in the form of roll for easy transportation to site of work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One) and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
183.6
-
-
... More
WATER SUPPLY AND SANITORY INSTALLATIONS WORK:-
Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : 15 mm dia nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
206
-
-
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 15 mm nominal bore etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
42
-
-
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
13
-
-
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
13
-
-
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
2
-
-
... More
Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
8
-
-
... More
Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 18.74.1 15 mm nominal bore with 30cm length 15 mm nominal bore with 45 cm length etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
13
-
-
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
14
-
-
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS: 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 250 mm etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
1
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore etccomplete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
5
-
-
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x 410x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required One urinal basin with 5 litre white P.V.C. automatic flushing cistern etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
5
-
-
... More
Providing and fixing Granite Stone of approved shade with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. etc.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
2.5
-
-
... More
Providing and Fixing of PVC pipes complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. 110 mm dia
361.5
-
-
... More
Providing and Fixing of PVC pipes complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. 75 mm dia
115
-
-
... More
Providing and Fixing of PVC pipes complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment. 300mm Dia
483
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment . 110 mm dia- Door bends
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment . 110 mm dia-Plain bends
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment . 110mm dia-Plain tee
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment . 110mm dia-Door tee
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment . 110mm dia-Collars
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 75mm dia-Door bends
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 75mm dia-Plain bends
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 75mm dia-Plain tee
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 75mm dia-Door tee
11
-
-
... More
Providing and Fixing of PVC pipe fittings complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment 75mm dia-Collars
11
-
-
... More
Providing and Fixing of PVC floor trap 75 MM etc.,complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
25
-
-
... More
Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
12
-
-
... More
Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors :300 mm inlet and 300 mm outlet Sand cast iron S&S as per IS: 3989 complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
75
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
13
-
-
... More
Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less
than 106 gms.complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
18
-
-
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 100 mm diameter complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
6
-
-
... More
Providing and fixing 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
18
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
21
-
-
... More
Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per HPPWD specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places.all including transportation with all lead and lift and all incidental charges and all taxes includes as imposed by HP Government.
1193.49
-
-
... More
SCHEDULE-A2-KHARAPATHER
CIVIL WORKS:
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material with all lead and lift complete as per HPPWD sepcification and as direction of Engineer-in-charge.
3.2
-
-
... More
Excavation in foundation and trenches in earth work in all heights and depths in all kinds of soils, including saturated soils comprising of pick work, jumper work and blasting work both in soft and hard rock with chiseling and wedging out of rock (where blasting is prohibited) and their intermediate classification of soils including, dewatering wherever required, setting out to required lines, levels as shown on the drawing and directed by the engineer -in-charge at site., according to the HP.PWD. specification of 1990 (one thousand nine hundred ninety) volume-I (one) and sorting out useful and unuseful material and transportation of the unuseful material for disposing at dumping site (To be arranged by the contractor) as per satisfaction of Engineer- in -charge through all modes of transportation including head load ,animal load or mechanical means along with its leveling fine dressing and with all kinds of labour, machineries, tools equipments and safety measures and incidentals necessary to complete the work by mechanical means and labour ( if required ). All useful material such as stones, shingles aggregate and slates shall be properly stacked at site to the maximum possible extent in all leads and lifts through all modes of transportation and used /removed as per the direction of the Engineer - in- charge. Any loss to the public and private propriety during the course of execution and disposal of serviceable and unserviceable materials shall be the absolute responsibility of the contractor and shall have to be duly compensated by him in all respects including all incidental charges.
147.26
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. etc complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
9.82
-
-
... More
Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
9.82
-
-
... More
Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size) and curing complete, up to plinth level complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications or as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government.
23.79
-
-
... More
Providing and layin Mechanically mixed & vibraed cement concrete 1:2:4 (1cement :2 sand :4 graded stone aggregate 20 mm nominal size) and curing complete excluding cost of form work In foundation and plinth,including carriage of materials through all modes of transportion with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-charge.
23.79
-
-
... More
Providing and laying reinforced cement concrete 1:1½:3( one cement : one and half sand : three graded crushed hard stone aggregate 20 mm (twenty milimeter) nominal size) ,mechanically mixed vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. up to plinth level and as directed by Engineer Incharge.
42.37
-
-
... More
The concrete finish with screed board vibrator, vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, Royality, Octroi, GST, toll tax or any taxes imposed by the Government. (The panel shuttering work shall be paid for separately).
352.56
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation, footing, basis of column etcetra . and mass concrete complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
70.32
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Lintels, beams, plinth beams, girders, bressumers and cantilevers complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
282.12
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Columns, pillars post and struts (square rectangular or polygonal in plain in any heights / thickness/depths etcetera upto all foor level as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
204.52
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in Flat surfcaes such as soffits of suspended floor, roofs, landings and the like, floors etc. upto 200 mm in thickness complete as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
147.71
-
-
... More
Providing form work with steel plates 3.15mm(three point one five millimeters)thick welded with angle iron in frame 30x30x5mm(thirty into thirty into five millimeters),so as to give a fair finish including centering ,shuttering, strutting and propping etcetera with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions etc. including attached pillasters buttresses, plinth and string cources and the like etc. as per HP.PWD. Specifications, approved drawings, designs and entire satisfaction and directions of the Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
36.62
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .“(Note :- Cement content considered in this item is @ 340 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works upto plinth level
82.93
-
-
... More
Providing and laying in position machine batched and machine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per HPPWD specifications and as directed By Engineer Incharge and including carriage of materials within all leads and lifts and other incidentals. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government .“(Note :- Cement content considered in this item is @ 340 kg/cum.“Excess/ less cement used as per design mix is payable/recoverable separately). All works above plinth level upto floor V level
77.44
-
-
... More
Providing Tor steel reinforcement of TATA Tiscon/SAIL/Rashtria Ispat incluiding cost of binding wire for R.C.C. work including cutting, bending, binding and placing in position complete in all floor levels in all heights including carriage of materials through all modes of transportations with in all leads and lifts and as per HP.PWD. specifications of 1990 volume-I and as per direction of Engineer-in-Charge.The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
22185.53
-
-
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) etc., complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
21.21
-
-
... More
12 mm (six millimeter) thick cement plaster with cement mortar 1:4 (one cement isto four sand), upto all floor level complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, GST, Toll Tax Sales tax or any other taxes imposed by the Government.
229.83
-
-
... More
12 (Tweleve) millimeters thick cement plaster in single coat on the fair side of brick/concrete/ stone walls for interior plastering up to all heights including arises. Internal rounded angles, chamfers and/or rounded angles not exceeding 80 (Eighty) millimeters in girth and finished even and smooth in cement mortar 1:4(One cement: four sand)as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
149.25
-
-
... More
18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
88.7
-
-
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as perarchitectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Powder coated aluminium (minimum thickness of powder coating 50 micron)complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
191.57
-
-
... More
Providing and fixing aluminium work for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials to various location through all modes of transportation in all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
15.18
-
-
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.00 mm thickness weight not less than 12.50 kg / sqm etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials through all modes of transportation with all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
92.44
-
-
... More
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. With stainless steel cover plate minimum 1.25 mm thicknes complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials through all modes of transportation with all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government..
2
-
-
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
a) 300X16mm
1
-
-
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.: a) 200x10 mm
1
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and complete as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.: a) 150*10 mm
1
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
a) 100 mm
1
-
-
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
a) 75 mm
1
-
-
... More
Providing and fixing aluminium hanging floor door Twin rubber stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete :as per the architectural drawings and the directions of engineer-in-charge and as per HP.PWD., Specifications includng carriage of materials, labour, tool and plants through all modes of transportation with in all leads and lifts, and as per direction of the Engineer-in-Charge. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government.
1
-
-
... More
Supplying and laying of 25 mm thick Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) etc., complete as per H.P. PWD. Specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour, equipments and materials through all modes of transportation with all leads lifts and all iincidential charges. The rate including of octroi, royalty, Malkana, toll tax, sale tax or other taxes imposed by the Government
475.68
-
-
... More
Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
149.25
-
-
... More
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
379.08
-
-
... More
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
379.08
-
-
... More
Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One), including carriage of all labour equipment and material to various location through all modes of transportation in all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment.
88.7
-
-
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material to various location through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
5355.8
-
-
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment
280.22
-
-
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required 0.63 mm thick with zinc coating not less than 275 gm/ m,²complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment .
146.84
-
-
... More
Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gm/m²complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment .
7.7
-
-
... More
Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain water pipes complete. 0.63 mm thick with zinc coating not less than 275 gm/m²complete as per HP.PWD specification 1990 (One thousand Nine hundred Ninety) Volume-1 (One)and as directed by Engineer Incharge at site, including carriage of all labour equipment and material through all modes of transportation with all leads and lifts, including all iincidential charges.The rate including of octory, royalty, malkana,toll tax, sal tax or other taxes imposed by goverment .
15.4
-
-
... More
SCHEDULE-B1 - PARALA - ELECTRICAL WORKS
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel, Metal Box-Havells, Legrand, MK Electric,RR, Kabel, Switch- Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
639
-
-
... More
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel, Metal Box-Havells, Legrand, MK Electric, RR Kabel, Switch- Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
83
-
-
... More
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
1650
-
-
... More
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
450
-
-
... More
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
1650
-
-
... More
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
450
-
-
... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). MAKE: Metal Box: Havells, Legrand, MK Electric, RR Kabel, Socket: Havells, Legrand, MK Electric , RR Kabel, Switch: Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
70
-
-
... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. MAKE: Metal Box: Havells, Legrand, MK Electric, RR Kabel, Socket: Havells, Legrand, MK Electric , RR Kabel, Switch: Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
70
-
-
... More
Providing and installation of Indoor Commercial Range Recessed LED Flat Panel 2 X 2 34W, 5700K (Wattage :34W with 4000lm) CRCA Powder coated finish wirh Polystyrene Opal diffuser, input voltage range of 140 to 270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other make approved by Engineer-in-Charge.
64
-
-
... More
Providing and installation of Industiral range LED 80W -5700K with the follwings , 1)MS Powder coated with PC Opal Doffuser, 2) System lumen output-8000lm, 3) System efficacy of 100lm/W, 4) Rated system life of 50,000BH @L70, 5) CCT-5700K and CRI80, 5) Protection:IP65& THD10%, PF.95, 6) Operating Temperature: -10deg C to +45deg C, 7) Operating Voltage Range:140V -270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other make approved by Engineer-in-Charge.
236
-
-
... More
Providing and installation of Industrial Range LED 70W -5700k with the follwings, 1) White powder coated Die-Cast aluminium housing with high efficiency polycarbonate UV stabilize cover with intergrated lens, 2) System lumen output-7750lm, 4) System efficacy of 105 lm/W, 5) Rated system life of 50,000BH @ L70, 6) CCT-5700K and CRI80, 7) Protection :IP65, IK 07& THD10%, PF,095, 8) Operating temparature: -10deg C to +45deg C, 9) Operating voltage range: 140V-27OV including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other make approved by Engineer-in-Charge.
180
-
-
... More
Providing and installation of Indoor Commercial Range LED 20W -6500K Batterns with the follwings, 1) Extruded alumnium housing, 2)System Lumens-2200Lm, CRI80, 3) CCT:6500K, THD15%, PF0.95, IP20, IK03, 4) Operating Temparature: -10deg C to +45deg C, 5) Input Volateg Range:140-270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other make approved by Engineer-in-Charge.
64
-
-
... More
Providing and installation of Indoor Commercial Range LED 40W -6500K Batterns with the follwings, 1) Surface mounted Aluminium housing with Polycarbonate diffuser, 2)System Lumens-4600Lm, CRI80, 3) CCT:6500K, THD10%, PF0.95, IP20, IK03, 4) Operating Temparature: -10deg C to +45deg C, 5) Input Volateg Range:140-270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other make approved by Engineer-in-Charge.
178
-
-
... More
Providing and installation of 450mm sweep Wall Mounted fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make: Havells, Usha, Orient, Crompton or any other make approved by Engineer-in-Charge.
2
-
-
... More
Providing and installation of exhaust fan Light duty, (Domestic) 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make:Havells, Usha, Orient, Crompton or any other make approved by Engineer-in-Charge.
11
-
-
... More
Providing , installation of 50W LED Street light with polycarbonate body and aluminium heat sink, suitable for input voltage: AC 220-240V, 50/60Hz including mounting the fixture, testing etc. as required complete in all respects with two year warranty &100 lumens/watt. Make:- Philips, Wipro, Syska, GE, Bajaj, C & S, Panasonic or any other make approved by Engineer-in-Charge.
15
-
-
... More
Supplying and erection of street light bracket made of 32mm dia G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-
15
-
-
... More
Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 5.40 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- 8 Meter long having nominal bore dia. 125 mm planting depth 120 cm with pit depth 135 cm.
15
-
-
... More
Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase, 230 volts complete as required:-
2
-
-
... More
Supplying and fixing following ways Three phase sheet steel MCB Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge. Double door-8 way
5
-
-
... More
Supplying and fixing following ways Three phase Vertical TPN Power Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other approved by Engineer-in-Charge. Double door-8 way
6
-
-
... More
Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge. 40 Amps. Cat-A.
11
-
-
... More
Supplying and fixing Douple pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge.
85
-
-
... More
Supplying and fixing Single pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge.
120
-
-
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
150
-
-
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
14036
-
-
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
125
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
10
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
6
-
-
... More
Providing and fixing 8 SWG (4.00 mm dia) copper wire on surface or in recess for loop earthing as required
250
-
-
... More
Providing and fixing 50mm x 5mm copper strip on surface or in recess for earth connections etc. as required.
45
-
-
... More
Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.
110
-
-
... More
Supply, Erection, Testing and comissioning of Coventional type Lightning Areester with necessary Acessories etc. as required.
2
-
-
... More
Supply, Install, testing & commissioning of 4MP IP Dome Camera with the following specifications etc., complete. a)1/3" 4.1 MP CMOS, b) Resolution (2560 x 1440), c) 3.6 mm Fixed Lens, d) High-Powered IR LEDs, e) Voltage 12 V DC, f) Picture elements: 2688x1520, g) Protection IP66, h) Operating Temprature degC: -30 TO +60 C
49
-
-
... More
Supply, Install, testing & commissioning of 64 Channel NVR with 4 Sata with the following specifications etc., complete. a) Up to 12 Megapixels resolution recording, b) Support 2-ch HDMI, 2-ch VGA, HMDI1 at up to 4K(3840x2160) resolution, c) Up to 64 IP cameras can be connected with 320M incoming bandwidth,d) Support H.265/H.264/MPEG4 video formats.
2
-
-
... More
Supply, Install, testing & commissioning of 6 TB HDD with the following specifications etc., complete. a) Interface Tranfer rate Buffer to host : 6GB/s, b) Host to/from drive (sustained): 180 MB/s, c) Temperature Operating : 0 to 60 deg C, Non-Operating :-40 to 60 deg C
4
-
-
... More
Supply, Install, testing & commissioning of 16 port POE Switch with the following specifications etc., complete. a) 16X 1000 Mbps PoE ports, b) 2 x1000 Mbps combos, c) 100 Mbps network access, d) Operating Temperature : 0 to 40 deg C, e) Voltage -100-240 V DC
2
-
-
... More
Supply, Install, testing & commissioning of 8 port POE Switch with the following specifications etc., complete. a) 8 X 1000 Mbps PoE ports, b) 2 x1000 Mbps combos, c) 100 Mbps network access, d) Operating Temperature : 0 to 40 deg C, e) Voltage -100-240 V DC
2
-
-
... More
Supply, Install, testing & commissioning of 43" LED Smart Television with the following specifications etc., complete. Make:Samsung, Sony, Micromax, Mi Tv, Haier a) Display Size : 43 inch, Color:Black, b) Sreen Type : LED, c) Resolution(pixels) : 3840 x 2160, d) Dimensions: 977mm x57mm x80.8mm, e) No of HDM1 Port:2, n OF usb Port:1, f)Wifi- Type:802.11ac, g)Ethernet RJ45, h) No of speaker:2, i)Sound Technology: Dolby Digital Decoder
1
-
-
... More
Supply, Install, testing & commissioning of OEM PVC Box for Camera Mounting 4x4 ( White ) , Wall Mount/ Ceiling Mount , 22.4 x 21.69 x 10.39 cm ; 680.39 Grams etc., complete.
49
-
-
... More
Supply, Install, testing & commissioning of 12u rack , rack mount hardware , rack mount power strip 6 socket with fuse protection , 1u cantilever tray , 1u cable organizer , with fan and hardare kit etc., complete.
1
-
-
... More
Supply, Install, testing & commissioning of 2U Rack with Power Manager etc., complete
4
-
-
... More
Supply, Install, testing & commissioning of UPS 2KVA / 72V With inbuilt batteries with the following specifications etc., complete. a) Output Power Wattage: 1800 W, b) Input Voltage: 220 V, c) Output Voltage: 230 V, d) Input Frequency: 40-70 Hz, e) Output Frequency: 50-60 Hz
1
-
-
... More
Supply and Laying of CAT6 cable with pipe and fittings etc., complete
1033
-
-
... More
Supply and Laying of Power cable for POE Switches with pipe and fittings etc., complete.
1033
-
-
... More
Design, Detailing, Approval of Client, Supply, Erection, Testing and Commissioning of enitre system for Electric Goods Lift Makes:Kone/Otis/Schindler/ Mitsubishi/Johnson or any other make approved by Engineer-in-Charge.Type:Goods Auto Lift Capacity : 10MT Speed: 7.5 m/Min No. of Stops: 3 No. of opening : 3(all opening same side) Shaft Size: 390*36000mm Cabin size: 3100*3400*2100 mm Pit depth:1500 mm car panel : M.S Cabin podwer coated Car Door : Manual door Flooring: PVC Light: LED Car indication button pannel: Illuminated button with 7 segment direction & posistion indicator Hall button Plate: Illuminated button with 7 segment direction & posistion indicator Landing Door: Manual collapsible door Clear opening: 300 mm (width)*210 mm (height) Power system: 415 volts, 3 phase ,50 HRtz, Alternating current Auto Recue Device: Available Voice Announcer: Available ARD Battery: 12 Volt 7 AH Exide Battery COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries. Fireman controller having fireman switch at fire Landing, • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.
4
-
-
... More
Providing, laying and fixing of 3.5x 300 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
520
-
-
... More
Providing, laying and fixing of 3.5x 240 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
10
-
-
... More
Providing, laying and fixing of 3.5x 185 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the following size:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
392
-
-
... More
Providing, laying and fixing of 3.5x 120 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
75
-
-
... More
Providing, laying and fixing of 3.5x 95 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
385
-
-
... More
Providing, laying and fixing of 3.5x 70 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
360
-
-
... More
Providing, laying and fixing of 3.5x 50 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
10
-
-
... More
Providing, laying and fixing of 4x 25 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
250
-
-
... More
Providing, laying and fixing of 3.5x 25 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the following size:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
50
-
-
... More
Providing, laying and fixing of 4x 16 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
575
-
-
... More
Providing, laying and fixing of 2x 6 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
100
-
-
... More
Providing, laying and fixing of Three Core 185 Sq.mm Aluminium HT Cables, Stranded compacted circular aluminium conductor, Conductor screen with extruded semi conducting compound, XLPE insulated, Insulation screening with Extruded semi conducting compound in combination with copper tape, AL round wire armoured and overall PVC sheathed cable confirming to IS 7098 (Part-2) : MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
50
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3 1/2 x 300 Sqmm aluminium cable etc., complete.
24
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3 1/2 x 240 Sqmm aluminium cable etc., complete.
4
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3 1/2 x 185 Sqmm aluminium cable etc., complete.
8
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3 1/2 x 95 Sqmm aluminium cable etc., complete.
12
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for3 1/2 x 70 Sqmm aluminium cable etc., complete.
4
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for3 1/2 x 50 Sqmm aluminium cable etc., complete.
4
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for4 x 25 Sqmm aluminium cable etc., complete.
2
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3.5 x 25 Sqmm aluminium cable etc., complete.
2
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 4 x 16 Sqmm aluminium cable etc., complete.
16
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 2 x 6 Sqmm aluminium cable etc., complete.
8
-
-
... More
Supplying and installing 150 mm width X 50 mm depth X 1.6 mm thickness of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc., complete.
10
-
-
... More
Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc., complete.
10
-
-
... More
Supplying and installing 450 mm width X 50 mm depth X 2.0 mm thickness of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc., complete.
413
-
-
... More
SCHEDULE-B2 -KHARAPATHAR - ELECTRICAL WORKS
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel, Metal Box-Havells, Legrand, MK Electric,RR, Kabel, Switch- Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
22
-
-
... More
Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel, Metal Box-Havells, Legrand, MK Electric, RR Kabel, Switch- Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
16
-
-
... More
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
100
-
-
... More
Wiring for light plug with 2x1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
100
-
-
... More
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other approved by Engineer-in-Charge.
100
-
-
... More
Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No.4 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
100
-
-
... More
Supplying and fixing metal box of 150mm X 75mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings). MAKE: Metal Box: Havells, Legrand, MK Electric, RR Kabel, Socket: Havells, Legrand, MK Electric , RR Kabel, Switch: Havells, Legrand, MK Electric, RR Kabel or any other approved by Engineer-in-Charge.
20
-
-
... More
Supplying and fixing metal box of 180mm X 100mm X 60mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in FRLSont including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required. MAKE: Metal Box: Havells, Legrand, MK Electric, RR Kabel, Socket: Havells, Legrand, MK Electric , RR Kabel, Switch: Havells, Legrand, MK Electric, RR Kabel or any other make approved by Engineer-in-Charge.
20
-
-
... More
Providing and installation of Industiral range LED 80W -5700K with the follwings , 1)MS Powder coated with PC Opal Doffuser, 2) System lumen output-8000lm, 3) System efficacy of 100lm/W, 4) Rated system life of 50,000BH @L70, 5) CCT-5700K and CRI80, 5) Protection:IP65& THD10%, PF.95, 6) Operating Temperature: -10deg C to +45deg C, 7) Operating Voltage Range:140V -270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other make approved by Engineer-in-Charge.
18
-
-
... More
Providing and installation of Indoor Commercial Range LED 20W -6500K Batterns with the follwings, 1) Extruded alumnium housing, 2)System Lumens-2200Lm, CRI80, 3) CCT:6500K, THD15%, PF0.95, IP20, IK03, 4) Operating Temparature: -10deg C to +45deg C, 5) Input Volateg Range:140-270V including mounting the fixture, testing etc. as required complete in all respects with two year warranty . Make:- Havells , Philips, Wipro, Syska, GE, Bajaj, C&S, Panasonic, Crompton or any other approved by Engineer-in-Charge.
20
-
-
... More
Providing and installation of 450mm sweep Wall Mounted fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make: Havells, Usha, Orient, Crompton or any other approved by Engineer-in-Charge.
3
-
-
... More
Providing and installation of exhaust fan Light duty, (Domestic) 300 mm sweep in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:- Make:Havells, Usha, Orient, Crompton or any other make approved by Engineer-in-Charge.
1
-
-
... More
Providing , installation of 50W LED Street light with polycarbonate body and aluminium heat sink, suitable for input voltage: AC 220-240V, 50/60Hz including mounting the fixture, testing etc. as required complete in all respects with two year warranty &100 lumens/watt. Make:- Philips, Wipro, Syska, GE, Bajaj, C & S, Panasonic or any other make approved by Engineer-in-Charge.
2
-
-
... More
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
2
-
-
... More
Supplying and erection of Galvanized Iron (G.I.) pipe pole 'A' quality of suitable length and dia. 5.40 mm thickness, including fixing up to a given depth below G/L.The hole of excavation about 30 cm dia. and given depth to be filled in up to 15 cm below G/L with 1:3:6 cement concrete and there above plinth with 1:2:4 cement concrete up to a height of 45 cm from G/L. The radial thickness of the plinth above G/L should not be less than 6.35 cm and sufficient to completely flush a 180 mmx100 mmx 45 mm deep, glass filled Nylan F.R. grade box for housing a 16 Amp. MCB, the outer surface of the plinth to be finished with 1:3 cement plaster 6 mm thick, the fuse-box shall have a water tight cover, including painting of pole with two coats of approved color, brand and manufacture of paint over a priming coat complete in all respects as required:- 8Meter long having nominal bore dia. 125 mm planting depth 120 cm with pit depth 135 cm.
2
-
-
... More
Supplying and fixing following ways Three phase sheet steel MCB Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge. 8 way, Double door
1
-
-
... More
Supplying and fixing following ways Three phase sheet steel MCB Distribution Board 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge. 8 way, Double door
1
-
-
... More
Supplying and fixing following rating double pole (Three phase and neutral) 240 volts Residual Current Circuit Breaker (RCCB) having a sensitivity current 300 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge. 40 Amps. Cat-A.
2
-
-
... More
Supplying and fixing Douple pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge.
11
-
-
... More
Supplying and fixing Single pole 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Make: Havells, Legrand, L&T or any other make approved by Engineer-in-Charge.
24
-
-
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
20
-
-
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
227
-
-
... More
Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required. MAKE: Wire -Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire
20
-
-
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
4
-
-
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
-
-
... More
Providing and fixing 8 SWG (4.00 mm dia) copper wire on surface or in recess for loop earthing as required.
100
-
-
... More
Providing and fixing 50mm x 5mm copper strip on surface or in recess for earth connections etc. as required.
30
-
-
... More
Providing and fixing 25mm x 5mm copper strip on surface or in recess for earth connections etc. as required.
70
-
-
... More
Supply, Erection, Testing and comissioning of Coventional type Lighting Areester with necessary Acessories
2
-
-
... More
Supply, Install, testing & commissioning of 4MP IP Dome Camera with the following specifications etc., complete. a)1/3" 4.1 MP CMOS, b) resolution (2560 x 1440), c) 3.6 mm Fixed Lens, d) High-Powered IR LEDs, e) Voltage 12 V DC, f) Picture elements: 2688x1520, g) Protection IP66, h)Operating Temprature degC: -30 TO +60 C
12
-
-
... More
Supply, Install, testing & commissioning of 64 Channel NVR with 4 Sata with the following specifications etc., complete. a) Up to 12 Megapixels resolution recording , b) Support 2-ch HDMI, 2-ch VGA, HMDI1 at up to 4K(3840x2160) resolution, c) Up to 64 IP cameras can be connected with 320M incoming bandwidth, d) Support H.265/H.264/MPEG4 video formats
1
-
-
... More
Supply, Install, testing & commissioning of 6 TB HDD with the following specifications etc., complete. a) Interface Tranfer rate Buffer to host : 6GB/s, b) Host to/from drive (sustained): 180 MB/s, c) Temperature Operating : 0 to 60 deg C, Non-Operating :-40 to 60 deg C
1
-
-
... More
Supply, Install, testing & commissioning of 16 port POE Switch with the following specifications etc., complete. a) 16X 1000 Mbps PoE ports, b) 2 x1000 Mbps combos, c) 100 Mbps network access, d) Operating Temperature : 0 to 40 deg C, e) Voltage -100-240 V DC
1
-
-
... More
Supply, Install, testing & commissioning of 8 port POE Switch with the following specifications etc., complete. a) 8 X 1000 Mbps PoE ports, b) 2 x1000 Mbps combos, c) 100 Mbps network access, d) Operating Temperature : 0 to 40 deg C, e) Voltage -100-240 V DC, 8 port POE Switch
1
-
-
... More
Supply, Install, testing & commissioning of 43" LED Smart Television with the following specifications etc., complete. Make:Samsung, Sony, Micromax, Mi Tv, Haier a) Display Size : 43 inch, Color:Black, b) Sreen Type : LED, c) Resolution(pixels) : 3840 x 2160, d) Dimensions: 977mm x57mm x80.8mm, e) No of HDM1 Port:2, n OF usb Port:1, f)Wifi- Type:802.11ac, g)Ethernet RJ45, h) No of speaker:2, i)Sound Technology: Dolby Digital Decoder
1
-
-
... More
Supply, Install, testing & commissioning of PVC Box for Camera Mounting 4x4 ( White ) , Wall Mount/Ceiling Mount , 22.4 x 21.69 x 10.39 cm ; 680.39 Grams etc., complete.
12
-
-
... More
Supply, Install, testing & commissioning of 12u rack , rack mount hardware , rack mount power strip 6 socket with fuse protection , 1u cantilever tray , 1u cable organizer , with fan and hardare kit etc., complete.
1
-
-
... More
Supply, Install, testing & commissioning of2U Rack with Power Manager etc., complete.
2
-
-
... More
Supply, Install, testing & commissioning of UPS 2KVA / 72V With inbuilt batteries with the following specifications etc., complete. a) Output Power Wattage: 1800 W, b) Input Voltage: 220 V, c) Output Voltage: 230 V, d) Input Frequency: 40-70 Hz, e) Output Frequency: 50-60 Hz
1
-
-
... More
Supply and Laying of CAT6 cable with pipe and fittings etc., complete.
257
-
-
... More
Supply and Laying of Power cable for POE Switches with pipe and fittings etc., complete.
257
-
-
... More
Design, Detailing, Approval of Client, Supply, Erection, Testing and Commissioning of enitre system for Electric Goods Lift Makes:Kone/Otis/Schindler/ Mitsubishi/Johnson or any other make approved by Engineer-in-Charge.Type:Goods Auto Lift Capacity : 10MT Speed: 7.5 m/Min No. of Stops: 2 No. of opening : 2(all opening same side) Shaft Size: 390*36000mm Cabin size: 3100*3400*2100 mm Pit depth:1500 mm car panel : M.S Cabin podwer coated Car Door : Manual door Flooring: PVC Light: LED Car indication button pannel: Illuminated button with 7 segment direction & posistion indicator Hall button Plate: Illuminated button with 7 segment direction & posistion indicator Landing Door: Manual collapsible door Clear opening: 300 mm (width)*210 mm (height) Power system: 415 volts, 3 phase ,50 HRtz, Alternating current Auto Recue Device: Available Voice Announcer: Available ARD Battery: 12 Volt 7 AH Exide Battery COP with SS face plate having metallic push buttons with Braille Code & luminous indicator around button with FPI, scrolling UP/DN LED indicator & with/without attendant key switch, OWD with audio-visual alarm, VAS in Hindi & English with intercom system with telephone instrument in Lift car, LMR & FCC/ground floor LOP with SS face plate having recess/surface push button box for all landings with scrolling UP/DN LED indicator having metallic push buttons with Braille Code & luminous indicator around button with CPI, Lift car arrival & next travel direction audio-visual indication at all landings. Lift controller based on microprocessor/ PLC with VVVF Drive having closed loop control system, with IBMS compatible having necessary port, control panel duly wired with proper size & strength copper wire for power & control circuit, with provision for addition of floor/control card & allied accessories control panel having enclosure of 1.5mm CRCA sheet with powder coating with IP54 Protection class ARD complete with necessary SMF VRLA batteries. Fireman controller having fireman switch at fire Landing, • Lift Machine of Gearless PMSM of suitable kW with Traction pulley, OSG, electromagnetic brakes, entire assembly mounted on adequate size girders duly fixed on LMR floor/ shaft walls complete with main/diverter traction sheaves, suspension wire ropes/belts of adequate size & strength.Other mechanical parts such as 'T' section adequate size guide rails for car & counter weight with brackets fasteners, counter weight frame with necessary blocks, buffers with necessary support arrangement, MS pit ladder etc. erected with necessary steel work.Minor civil work for alteration if any and erection of door frames and accessories, erection buffers, erection of lift machinery, adequate size core cuts if required & scaffolding for erecting guide rails fixing of girders for mounting lift machine etc. complete as per specification no. LFT.
1
-
-
... More
Providing, laying and fixing of 3.5x 150 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the following size:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
55
-
-
... More
Providing, laying and fixing of 3.5x 70 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
5
-
-
... More
Providing, laying and fixing of 3.5x 25 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the following size:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
104.25
-
-
... More
Providing, laying and fixing of 4x 16 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
27.5
-
-
... More
Providing, laying and fixing of 4x 10 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete:- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
15
-
-
... More
Providing, laying and fixing of 2x 6 Sq.mm aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc., complete :- MAKE: Havells, Poly Cab, Finolex, RR Kabel or any other make approved by Engineer-in-Charge.
5
-
-
... More
Providing, laying and fixing of Three Core 185 Sq.mm cable Aluminium HT Cables, Stranded compacted circular aluminium conductor, Conductor screen with extruded semi conducting compound, XLPE insulated, Insulation screening with Extruded semi conducting compound in combination with copper tape, AL round wire armoured and overall PVC sheathed cable confirming to IS 7098 (Part-2) : MAKE: Havells, Poly Cab, Finolex, RR Kabel
25
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3 1/2 x 150 Sqmm aluminium cable etc., complete.
8
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3 1/2 x 70 Sqmm aluminium cable etc., complete.
2
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 3.5 x 25 Sqmm aluminium cable etc., complete.
6
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 4 x 16 Sqmm aluminium cable etc., complete.
2
-
-
... More
Supplying and fixing of Suitable single compression cable end jointing with gland and Aluminium lugs for 2 x 6 Sqmm aluminium cable etc., complete.
2
-
-
... More
SCHEDULE-C1 - PARALA
(HVAC Component):
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for Refrigeration Equipments - CA Store. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system as included in the the quoted rates. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage. Design, Detailing, Supply, erection, Testing and commission of entire system for Compressor (2 Working + 1 Stand By) 75 Kw x IE 2 x 415 V x Foot Mounted Motor -3SET. 75 KW x Foot Mounted Motor x 1440 RPM , The detailed technical equipment specification of compressor is provided below, Compressor --Reciprocating Compressor - Direct Drive/Belt Drive Complete Package, Oil Heater,Unloader Solenoid Valves,Safety Relief Valve,Suction and Discharge Thermometer,Equalizing Valve and direct drive set,Water cooled oil cooler,Base for Compressor and Motor with Blocks,Control Panel Board - OP , LP , HP Cut outs of Danfoss,Toggle switch with indicator for Unloader.Tubing and Ferrule for Connection,Wiring, Painting Alignment Bolt,Foundation Bolts,Tool Kits, Make--Kirloskar/Frick India /MYCOM N6L / Equivalent approved by Engineer incharge, Type--NH3 Reciprocating, Operating Temperature--(-7 Deg C SST/ 40 Deg C SDT), Suction Temperature--(-) 10 Deg C, Condensing Temp.--35 Deg C, Total Refrigeration Capacity--117.2 kw, Final Compressor Pressure--12.75 Kgf/Cm2, Final Compressor Temperature-90 Deg C, Compressor Speed-730 RPM, Motor Speed--1000 RPM, Rate output of Motor-50HP, Type of Protection-IP-55, Oil Cooler Output @ 100%--50Degree Centigrade, Cold Demand @ 100%-32 degree Centigrade, Seperator degree oil seperator-10PPM, Output of oil heating system-8.4kw, Oil filling -27 litres, oil pump-Inbuit Mechanical Pump, Operating Weight-3400 kg approximately, Motor -75KW, IE2KW:75/100HP,RPM:1480, FRAME:ND280SVoltage :415 ,frequency:590HZ
4pole,Foot Mounted Duty:S1,IP55,Ins.CI.F,Amb:50DEG, Motor Make-Seimens/ABB/Kirlosker/Crompten Greeves/Equiavalent approved by Engineer-in-charge. Type/ Model --TEFC squirrel cage induction type / Equivalent as per approved list, Starter Manufacturer--Danfoss (VFD)/ ABB/ Crompton Greaves /Equivalent aapproved by engineer incharge, Type/Model-FC 102, 75 KW X 157 AMPS / L&t/ Seimens/ ABB/ Equivalent as per approved list
1
-
-
... More
Design, Detailing, Supply, erection, Testing and commission of entire system for Air Cooling Units Capacity - 55 Kw, Room Temp. - 0 Deg C, Qty. - 01 Per Chamber- 24 ChambersThe detailed technical equipment specification of Air cooling unit is provided below Make: Alfa Laval/ Guntner / Star Coolers/ Bufflow/ Equivlent approved by Engineer Incharge Cooling Capacity: 55 kw Operating Parameters: (-)8/(-)1.1 Deg C Tubes: Stainless steel, OD 5/8" x 0.6 mm thick Tube Internal Volume: 108 dm3 Fin MOC: Aluminium SinewaveCasing: GI Powder Coated Sheet Air flow:42200 CMH Surface area: 390 M2 Fin Spacing: 7 mm Volumetric Fluid flow: 7.0 CMH Pressure loss: 79.7 Pa No of fans: 4 Fan dia: 450 mm Fan speed: 4- pole Fan Power:1.1 Kw Weight (Empty):520 Kg Motor - are foot mounted and designed for 415+ 10% Volts, 3 Phase and 50 Hz Motor Make:Siemens/ ABB/ Compton Greaves/ Kirloskar / Equivalent approved by Engineer incharge, Design, Detailing, Supply, erection, Testing and commission of entire system for PHE Chiller 78 TR x 2 Nos. The detailed technical equipment specification of PHE Chiller is provided below, Make:Kelvion/ALFA/Equivalent approved by Engineer Incharge, Chiller Evaporator :PHE Type, Capacity: 274 kw, Flow Rate: 90 CMH, Glycol inlet Temperature: (-) 4 Deg C, Glycol Output Temperature: (-) 7 Deg C, Evaporating Temperature: (-) 10 Deg
1
-
-
... More
Design, Detailing, Supply, erection, Testing and commission of entire system for Accumulator Assembly and Float Level Controller, Accumulator size dia 36'' X 72 ' long with SA 516 GR 70 Plates, Float Level Controller AKS 38, Refrigerant : Applicable to HCFC, Non flammable HFC and R717 (Ammonia), Temperature range : (-)50 - 65 Deg C, Pressure Range : 28 bar g, Material float housing: Cast Iron, Zinc Chromated, Float housing bolts : Stainless steel, Pressure tube : Stainless steel, O- Ring: Neoprene, Electical switch box : Shock resistant polycarbonate, Electrical Data :250 V AC / 10 A, 30 V DC / 5 A, Weight:9.75 kg, Liquid level diiferential:Variable between 12.5 mm to 50mm in 12.5 mm increments., MS support structure with 65 MM X 125 MM C Channel
1
-
-
... More
Design, Detailing, Supply, erection, Testing and commission of entire system for Evaporative Condenser with Dual SS 304 Tube Type with Complete SS Casings/SS Water Sump - 143 TR x 1 Nos. The detailed technical equipment specification of Evaporative Condenser is provided below, Condenser Type: Evaporative Condenser, Make: Frick India / STAR COOLER/EVAPCO/BAC/ Emerson/DANFOSS /BITZER /CARRIER/BLUE STAR/ Equivalent approved by Engineer incharge , Temperature difference: Water temperature : 32 & 36 Deg C , Ammonia Temperature : 40 Deg C, Type: Induced Draft , Wet Bulb: 27 Deg C, THR: 508 KW/144.3 TR, Refrigerant: NH3, Condensing: 40 Ded C, Air Volume: 45000 Cu.m/hr, Fans : 3 x 800 mm, Axial Fan, 900 rpm, :Motor: 1.1 KW; 415V/3 Ph/50hZ, Water Flow :10 LPS, Pumps: 1 No with 1.5 kw motor mono- block type, Coil data5/8" OD x 1mm thick SS 304L tubes, M.O.C: Case work: Powder Coated GI,Water Tank: SS 304 , Fans : PAG Aerofoil type, Dry weight: 1494 kg (Approx), Operating weight: 2873 kg (Approx)
1
-
-
... More
Design, Detailing, Supply, erection, Testing and commission of entire system for Ammonia Receiver -2 Nos (Receiver Size dia 24"x12 Feet long with SA 516 GR 70 Plates) Make : Metalex Cryogenics, Simtech Coil Company/ Equivalent approved by the Engineer incharge
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Ammonia Valves & Fittings. Make: Danfoss/ Parker/ Vimal/ Superfreeze/ Equivalent approved by Engineer Incharge
AMMONIA STOP VALVES Features:
• Made of ForgeD Alloy Steel, Applicable to all common refrigerants including R717 and non corrosive gases/ liquids dependent on sealing material compatibility
• Available with:
◦ Heavy duty industrial handwheel for frequent operation
◦ Vented cap for infrequent operation
• Available in angle and straight versions with standard bonnet for installation in normal insulated systems
• The valves and caps are prepared for sealing, to prevent operation by unauthorized persons
• Internal metal backseating
◦ DN 15 - 150 (½ - 6 in.) • Can accept flow in both directions
• Max. working pressure: 25 bar (365 psig)
• Temperature range: -50 °C – 150 °C (-58 °F – 302 °F)
• Design specification according to DIN 3158
AV - ANGLE VALVE , GV - GLOBE VALVE, SV - SOLENOID VALVE, SFV-SAFETY VALVE, ST - STRAINER
Suction from Chiller Accumulator to Compressor
Valve on Compressor Suction Tapping - 3 Nos-AV-80mm
Valve for Purging Compressor - 3 Nos-AV-15mm
Valve for Purging Suction Header -1 No-GV-15mm
Valve for Pr. Gauge Suction Header -1 No-GV-15mm
Discharge from Compressor to Condensor
Valve at Discharge Header - 1No-AV-65mm
Valve at Tapping to Discharge Header from Compressor - 3Nos-AV-50,,
Valve at Oil Seperator Drain -3 Nos-GV-15mm
Valves for gas purging at Discharge Header -1 No-GV-15mm
Valves for Pr. Gauge at Discharge Header-1 No-GV=-15mm
Valve at condensor Inlet-2 Nos-AV-65mm
Purging Valve at Condensor Inlet/outlet-2 Nos-AV-15mm
Valve at condensor Outlet -2 Nos-AV-50mm
Condensor safety valve -2 Nos-SFV-15mm
Valve for safety valve -2 Nos- GV-15mm
Condensor pressure guage with valve-2 Nos- PG+AV-15mm
Valve for By Pass -2 Nos-GV-20mm
Valve for pressure guage installation at condense2 Nos -AV-15mm
Receiver
Receiver inlet valve -1 No-AV-50mm
Receiver safety valve -1 No-SFV-15mm
Valve for safety valve -1 No-AV-15mm
Valve for pressure guage installation at Receiver -1 No-AV-15mm Pressure guage -1 No-PG-0-300 psi
Receiver purge valve -1 No-AV-15mm
Receiver drain valve - 1No-AV-15mm
Reflex guage glass -1 No-Reflex gauge glass-30"mm
Valve for refrigerant charging -1 No-AV-15mm
Valve for Reflex guage glass installation -2 Nos-AV-25mm
Receiver Liquid Line to Chiller Valve for Liquid Outlet -1 No-AV-50mm
Valve after Receiver liquid outlet valve-1 No-AV-32mm
Valve for Refrigerant charging -2 No-AV-15mm
Liquid line Globe Valve before/after stainer 2 Nos-GV-32mm
Liquid line stainer-1 No-ST-32mm
Liquid line Solenoid Valve with By-pass provision-2 No-SV-Danfoss-25mm
Expansion Valve-2 No-EV-25mm Expansion Valve - BY Pass - 2No-GV-25mm
Liquid line valve after Expansion valve @ SPHE inlet -4 Nos-GV-25mm
Receiver Equilaising -2 No-AV-40mm
Receiver Equilaising - 2No-AV-40mm
PHE
PHE Outlet Valve -2 Nos-GV-100mm SPM 1-65 with CVP LP -2 Nos-GV-65mm
Isolaton Globe valve for Float control -4 Nos-GV-25mm
Liquid Level Control= AKS 38 Danfoss
PHE Drain Valve Oil Drain Pot -4 Nos-AV-25mm
PHE Drain Valve - 3 Nos-AV-15mm
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Glycol Flow Control Valve of 65 mm NB with ON//OFF Motorised Valve(24 Nos) , 24 Volt AC supply. Make - Rapid/ Parker /Kaizen/ Equivalent approved by engineer in charge
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for MS piping for refrigerant . Make - Jindal C Class/Tata / Equivalent approved by the Engineer incharge
Suction Header Chiller to compessor- SA 106 Gr-B/75-18. Mtr-125mm
Compressor suction Tappings-SA 106 Gr-B/75 - 24.60 Mtr-80mm
Discharge header compressor to OS - SA 106 Gr-B/75-18.30 Mtr-80mm
Discharge Tapping -SA 106 Gr-B/75-24.60 Mtr-50mm
Oil seperator to condensor 18.3m-SA 106 Gr-B/75-18.30 Mtr-65mm
Pipe for Oil charging vessel to compressor & Header-SA 106 Gr-B/75-18.30Mtr-15mm Pipe for Condenser Inlet Tapping -SA 106 Gr-B/75-6.10 Mtr-65mm
Condensor liquid line to reciever SA 106 Gr-B/75-24.60 Mtr-50mm
Reciever Liquid Header line to Chiller- SA 106 Gr-B/75-18.30 Mtr-32mm
Reciever Liquid Header line to Chiller-SA 106 Gr-B/75-18.30 Mtr-25mm
for By Pass connection -SA 106 Gr-B/75-12.20 Mtr-20mm
for purge -SA 106 Gr-B/75-24.60 Mtr-15mm
MS Fittings
MS Reducer seemless - SCH 40 - 3 Nos- 100x80mm
MS Seemless Bends Heavy - SCH 40 ( 4Nos-100mm, 12 Nos-80mm, 12Nos-65mm, 20 Nos-15mm, 12 Nos-50mm, 6 Nos-40mm, 8Nos-32mm, 6 Nos-25mm, 10 Nos-20mm
MS U bend - SCH 40-2 Nos-50mm
MS Dead Plug - FORGED STEEL-10Nos-1/2"
MS Forged Sockets Weldable-6 Nos-3/8", 10 nos1/2", 12 Nos-3/4", 4 Nos-1"
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for GI Piping and Fittings for Glycol
Make: Jindal/ Tata/ Equivalent approved by Engineer incharge
Butterrfly valve PHE outlet/inlet 4 Nos -150mm(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
Piping for PHE IN -G.I.Pipe - B Class12 Mtr-150mm
Pipe from PHE to tank- G.I.Pipe - B Class-24 Mtr-200MM
Pipe from Tank to pump -G.I.Pipe - B Class-2 Nos-150MM
BFV on glycol pump discharge -2 Nos -150mm(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
BFV on return from lines to PHE inlet -2 Nos-150mm(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
Butterfly valve CW to pump suction -3 Nos-150mm (BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
Pot stainer---cold well to pump suction -1 No-200mm(PS - MADE OF MILD STEEL BODY, FILTER SCREEN WITH STAINLESS STEEL WIREMESH - SERIES SI PN 10, BS 6755 TESTING STD.)
Thermowell for Glycol circuit x 100 mm long -Thermowell -8 Nos-1/2" BSP Flow Switch 1" Chiller outlet -Honeywell SS STRIP TYPE-2 Nos-25mm
Pressure Switch 2 Nos-MODEL KP 35 Danfoss
Pressure Guage with syphon with Cock valve -10Nos-0-7 kg/cm2
Ball valve for level indicator(Cold well) and Hose Pipe for Tank -4 N0s-15mm (BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
Ball Valve for PHE Defrosting-6 Nos-25mm(BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
By pass solenoid valve fron pump to tank -1 Nos-50mm-(SV-Rapid 2 WAY ON/OFF TYPE 220 V)
By pass solenoid valve Pipe pump to tank G.I.Pipe - B Class-4 Mtr-50mm
Ball valve before SV -1 No-50mm (BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
For Pump Asssy
For Pump Suction and Discharge- 5 Nos-150mm(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
For Stand BY Pump -4 Nos-150mm (BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
NRV Dual Plate at Pump Discharge-5 Nos-150mm (NRV - DUAL PLATE WATER CHECK VALVE - PN 10, BODY MATERIALS CI, IS 210 GR. FG 200)
Ball Valve for Condenser Drain -2 Nos-40mm-( BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
Ball Valve for Condenser Make up-2 Nos-40mm-( BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
Glyco Tank Drain -1 Nos-40mm (BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
Glycol Valves
Ball Valve ACU In/Out-Chamber 1 to 24-40 Nos-65mm (BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
For D Coupler -2 Nos-80mm-(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
Motorised valve -20 Nos-65mm
G.I Pipes & Fittings
Main Haeader for Pump Skid -G.I.Pipe - B Class-4 Nos-200MM
Butterfly Valve for Interconnect Reverse Return Header -4 Nos-150mm(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
For Chamber 1 - 8
Main Header Supply and Return for Chamber 8 -G.I.Pipe - B Class-144mTr-20mm
For Chamber 9 - 24
Main Header Supply and Return for Chamber 24-G.I.Pipe - B Class-144Mtr-200mm
Tapping for 1 - 24 -G.I.Pipe - B Class-144mTR-50mm
GI Fittings
G.I Bend B Class Weldable -22 nos-200mm, 124 Nos-65mm, 12Nos-150mm
GI Reducers B Class Weldable - 3nos-150125, 3 Nos-150100
Table - E Flanges - MADE OF MILD STEEL - BS - 10 STD. WELD NECK RING FLANGE- 8nos-200mm, 22 Nos-150mm, 4 Nos-80mm, 200 Nos-65mm-4 Nos-50mm
GI Nipple - B CLASS- 10Nos-15mmx200, 10nOS-20mmx200, 10 Nos-25mmx200, 5 Nos-40mmx200
Miscleanious
Champion Gasket - MADE OF CAF MATERIALS (COMPRESSED ASBESTOS FIBER RING)-20Kg-2mm thick
Tufflon Tape -30 nos
Dhaga-3pKt
Haltight-6Kg
Neoprene Gasket-30Kg-6mm thick
Hose Pipe Nylon Roped -5 Mtr-25mm
Hose Pipe Nylon Roped -5 Mtr-20mm
Hose Clamp - GI-6 Nos-25mm
Hose Clamp - GI- 6Nos-20mm GI Bolt Full Thread-80Nos-5/8"x5" GI Bolt Full Thread-380 Nos-5/8"x21/2" GI Bolt Full Thread-50Nos-5/8" x 2-1/2" GI Bolt Full Thread-50Nos-1/2"x2" GI Nut-430 Nos-1/2" GI Nut-130 Nos-5/8" GI Washer -100 Nos-5/8" GI Washer-100Nos- 1/2" Propelene Glycol - FOOD GRADE - SP. GRAVITY 1040 @ 20 Deg C, Assay - 99.93%, ACCidity -.0012, DOWM 100687, DOWM 101370, DOWM 101867, ASTM D5386, ASTM E1064, ASTM E394-6000 Litre.
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for GI Piping for Compressor Head Cooling
Make: Jindal/ Tata/ Equivalent approved by Engineer incharge
Monoblock pump with valves and NRV and Fittings 2 Nos, - 4.9 lps @ 12 MTR HEAD, 1.5 kW X 415 V-2 Hp - SUC/DIS - 50/40 (Kirloskar Monoblock KDS-225++ / Equivalent approved by Engineer Incharge)
Supply and Return Header GI B Class 65 MM-60 Mtr Tapping for Comp 1 to 3 -GI B Class 40 MM-18Mtr
Butterfly Valve - 2Nos-65mm-(BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
Ball Valve -6 Nos-40mm(BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Glycol Tank - 10,000 Lit
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Glycol Pump Skid 2 Working + 1 Stand By
GLYCOL PUMP - 20 LPS @ 21 mtr End Suction PUMP - 3 Nos X 11 KW
For Pump Asssy
For Pump Suction and Discharge-6 Nos-150mm (BFV - CR 22A, CI BUTTERFLY VALVE, IS:13095, PN 10, Flanges as per BS - 10 Table E)
NRV Dual Plate at Pump Discharge -3 Nos-150mm (NRV - DUAL PLATE WATER CHECK VALVE - PN 10, BODY MATERIALS CI, IS 210 GR. FG 200)
Ball Valve for Condenser Drain-2 Nos-40mm (BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554)
Ball Valve for Condenser Make up -2 Nos-40mm (BV CI 17, CI BUTTERFLY VALVE, IS:989-1981, CLASS - 125 PN 10, Parellel Threaded as per IS - 554), Glycol Tank Drain -1 No-40mm ()
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for PVC piping and fittings for Drain Line
Make: Prince, Supreme, Finolex/ Equivalent apporved by the Engineer Incharge
PVC Piping
ACU Drain pipe CH 1 to 21- 100 m - PVC Pipe -65mm dia-100Mtr
Drain Pipe Header -PVC Pipe 10kg/CM2-80mm dia-200Mtr
Threaded Adoptor -3"x2"-22Nos
MTA-2"-22Nos
PVC Elbow -65mm-180 Nos
PVC Elbow -80mm-10Nos
PVC TEE -80x65x80-25 Nos
PVC TEE -80x65x80-4 Nos
End Cap -80mm-5 Nos
Hacksaw Frame -2 Nos
Hacksaw Blade -10 Nos
Solvent CPVC -2 Lit
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Suction Line Insulation and Al. Cladding.Class O is has excellent technical parameters like low thermal conductivity [λ0°C ≤ 0.035 W/(m∙K)] and high water vapor diffusion resistance (µ ≥ 7,000). Class O gives increased long term thermal efficiency due to its closed cell structure which as long-term protection against condensation
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Insulation and Al. Cladding for Glycol Piping’s. Class O is has excellent technical parameters like low thermal conductivity [λ0°C ≤ 0.035 W/(m∙K)] and high water vapor diffusion resistance (µ ≥ 7,000). Class O gives increased long term thermal efficiency due to its closed cell structure which as long-term protection against condensation (Insulation Pipe Section Nitrile section 25 mm thick and 24 Al Cladding- 200mm-324M, 150mm-36M, 125mm-100M, 100mm-80M, 80mm-70M, 65mm-160M, 50mm-20M)
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Oil Separator - 20" Dia x 36" length x10 nos.
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Electrical panel with switchgears & VFD for ACU and star/delta starter for Compressor
PLC Automation WEB Based Local/Remote Monitoring (EVO Series) & Controlling System Via Internet with necessary Software, Hardware & Cable Kit. for 36 instruments only (Static IP ADDRESS IN YOUR SCOPE)
• Monitoring and controlling web server connectable to Dixell’s controllers with serial output or to others ModBUS-RTU compatible devices
• Electrical panel board on DIN Rail mounting • Structure based on Linux operative system with WEB pages
• Controller values display and parameter and alarm management
• Powerful tool to view graphs and export in Microsoft Excel® format
• Calendar function for alarm tran smission to the “in charge” service
• Alarm sending via FAX, SMS (optional with GSM modem) or e-mail
• Command sending activation through digital input
• Possibility to have a connect ion with a PDA or Smartphone
• Local or remote connection from PC using standard browser (Microsoft Internet Explorer® or Firefox®) for the data management and display
• 8MB internal memory to store 1 year of data with 15min sampling time (6 controllers)
• Standard communication protocol ModBUS -RTU
• 15VA max power absorption for XWEB
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Centralized Temp Controller & RH Monitoring and data logging with X-WEB suitable to connect with PC - Centralised Temp Controller and Monitoring Model- XH-260 L- 24 Nos- (DIXELL make L format /Equivalent approved by Engineer Incharge (WITH Dual DECIMAL DISPLAY, Top RED LED 8.0mm High and Bottom Yellow LED 5.6mm High with 14 Integrated icons) compatible for 2 Temperature Sensor NTC & 1 Humidity sensor XH20P (both not included) Input (Room), Evp Coil & Room Humidity, 1DIs (Door Status/Re mote ON/OFF) & Outputs for COMPRESSOR/VALVE (20A), Heater (8A), Humidifying (8A), Defrost (8A), Alarm (8A) & Light/Dehumidify (8A), 230V AC Power supply, Panel mount 150x31mm)
Temp Sensor - ntc Probe-24 Nos (General purpose-over-molded, IP67, thermoplastic cap, Dimension Ø6x15mm' Cable Length: 1.5mtr., Temp. range: -40 ÷ 110°C (-40 ÷ 230°F)
XP 20 P - Humidity probe- Power supply: according to the model: 19÷28Vdc or 9-20Vdc or 15÷35Vdc, Power consumption: 20mA max, Connection: 2 not polarised wires ,Max cross wires: 2,5mm2 ,Output: 4÷20mA or 0÷10Vdc, Measurement range: , XH20P, 0÷99% R. H., Protection: IP65, Operating range:XH20P, 0÷70 °C, Storage range: -30÷85 °C
RH response time: 15 sec in slowly moving air at 25°C, Accuracy at 25°C: better than 3% F. S., DIXELL Z.I. Via dell’Industria, 27 - 32010 Pieve d’Alpago (BL) IT
Centrailsed panel-1 No- MADE OF GI POWDER COATED SHEET WITH INDIVIDUAL CONTROL MCB FOR 24 CHAMBERS, AND ON INDICATIONS, WITH VOLT/AMPS METER ETC. 0.25 sq.mm x 3 core sheilded cable-6000 Mtr
1.0 sq.mm x 3 core for motorised valve controll-3000 Mtr
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for O2 , N2 , Welding job with material: welding rod SS to MS (Welding Rod ESAB 309 )-2PKT,O2 cylinder-25 Nos, N2 Cylindr for Testing-50 Nos, welding rod ms to MS-16 pkt
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Paint job for refrigerant piping : Paint - Red-2 Lit, Paint - Sky Blue-2 Lit, Paint - Yellow-4 Lit, Paint - Smoke Grey-4 Lit, Paint Red Oxide-8 Lit, Thinner-20 Lit, Paint Brush-2 Nos, Paint Brush-4 Nos, dhoti-10pcs, emery paper-10pcs
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Electrical Cables + Tray + Fitting
Flexible pipe 20 mm-3 Roll
PVC pipe conduit wth saddle 20 mm-1 Bag
saddle 20 mm-1pkt
Grimpping tool-1 Nos
Grimpping tool-1 Nos
Thimble
Copper Thimble hole type- 120 Sq.mm-50 Nos
Copper Thimble pin type - 6 Sq.mm-500 Nos
Copper Thimble pin type-4 Sq.mm-500 Nos
Copper Thimble pin type - 2.5 Sq.mm-500 Nos
Copper Thimble pin type - 1.5 Sq.mm-1500 Nos
Copper Thimble pin type - 1.0 Sq.mm-1000 Nos
Gland Bross coated 120 x 3c Al.-1.5"-16Nos
Gland Bross coated -6 x 3C Cu-7/8"-40 Nos
Gland Bross coated -4 Sq.mm-3/4"-40 Nos Gland Bross coated -2.5 x 3C Cu-1/2"-100Nos
Gland Bross coated -1.5 x 3 C Cu-1/2"-280 Nos
PG GLAND - PG 9-100Nos
Insulation Tape -Red-10 Nos, Yellow-10 Nos, Blue-10 Nos, Block-10 Nos
Cotton Tape-6 Nos
Ferrule
Numbering 0-9: 2.5 Sq.mm-3 pkt
Numbering 0-9 : 6 Sqmm-3pkt
Numbering 0-9 :4 Sq.mm-3pkt
Numbering 0-9: 1.5 Sq.mm-3pkt
A to Z, 1.5 Sq.mm-3pkt
A to Z, 2.5Sq.mm-3pkt
A to Z, 4 Sq.mm-3pkt
A to Z, 6 Sq.mm-3pkt
Cable Tie - 12"-10Pkt
Cable Tie - 6"pkt
Cable Tie - 4 "pkt
Cable Tray G.I. perforated = 18"x1.5"-230 Mtr-16 gauge
Cable Tray G.I. perforated = 12" x 1.5"-270 Mtr-16 gauge
Cable Tray G.I. perforated = 8" x 1.5"-234 Mtr-16 gauge
Cable Tray G.I. perforated = 2" x 1.5"-40 Mtr-16 gauge
Connecting Plate 6'' X 1.5"-500 Nos-16 gauge
Earthing Strip - 1"-100Kg-12 gauge
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Support for MS piping for refrigerant Line
5" x 2.5" x 5mm thick MS C Channel-3480 Kg 4" x 2" x 5mm thick MS C Channel-552 Kg
2" x 2" x 5mm thick MS Angle-570Kg
8 mm Plate 4 feet x 4 feet-1Pc
2" x 2" x 5 mm MS angle-133 Kg
4" x 2" x 5mm thick MS C Channel-368 Kg
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Refrigerant Gas & Oil charging (first charge only)
1
-
-
... More
Erection + Commissioning Charges for entire system for Refrigeration Equipments - CA Store
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for CA Equipment & Door MAKES - FCE/ VAN/ ABSORGER/ Equivalent approved by the Engineer Incharge. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Design, Detailing, Supply, erection, Testing and commission of entire system for CO2 Centralized Absorber Including the Pneumatic Valves
The detailed technical equipment specification of CO2 Absorber is provided below
Dual tank CO2 Scrubber for ultra low Oxygen (ULO) storage of vegetable and fruits.
Model -FB 300 X 3 Nos. / Equivalent approved by Engineer incharge
Drive -VFD DRIVEN
Capacity of Absorber -300 kg per day
Scrub Capacity -300 Kg CO2 24 -HR^-1 @ 3% Co2
Voltage -400 Volt
Current Intensity -(5) A
Plug Connection -16 A, 5-Pole
Sound Level -78 DB at 1 m
Weight (Apprx.) -1070 Kg
Pull down time -within hour
Power consumption -3.2 kw each
Weight -1070 kg
Dimensions -189 x 103 x 198 cm
Electric supply -3 phase network , 380 V - 50 HZ
Design, Detailing, Supply, erection, Testing and Commission of entire system for Nitrogen generator w/o air compressor - 24 Chambers
The detailed technical equipment specification of Nitrogen generator is provided below
Model -Bravo 65 x 2 / Equivalent approved by Engineer incharge
Capacity -65 Cum./hr each
Total volume of Chamber -860 Cu.m
Free Volume -172 Cu.m
Pull down time -48 hrs
Injection Capacity (5% o2) -65 Cu.m per hour
Voltage -400 Volt
Power -1.2 Kw
Plug Connection -32 A, 5-Pole
Sound Level -81 dB at 1m
Flow meter Range -700litres/min
Control -S132 Case with Siemens PLC & text display
Service interval -every 2000 service hours
Air Compressor -02 NOS
Power consumption -18 KW each MODEL -ASK 34
AIR FLOW -88 CMH
Dimensions -1100 x 800 x 1530
weight -550 each
Automatic System For the analysis of O2 and CO2 with Computerized Control System of CO2
Analysing O2 and CO2 conditions of the CA room shall be done with an analyzing tower placed in the CA equipment room.
The measuring and control panel consists of Own display and keyboard Connection to the central P.C for data exchange
Connection to printer in case of failure of centrall P.C
I/O modules for controlling all functions CA rooms and Chilled rooms
Automatic calibrations and correction of built - in - CO2 and O2 analyzer
All panels should be equipped with a UPS Battery pack
Output power capacity 500 VA
Output Power capacity 300 Watts
Nominal Output voltage 230 V
CO2 GAS ANALYZER
The gas sample to be analysed is passed through the analysis cell of the instrument which is situated between an infrared ray source and the detector
The carbon dioxide present in the sample absorbs the energy from the source, reducing the
amount of rays which reach the detector.
The output of the detector is therefore dependent on the concentration of carbon dioxide present in the sample.
An optic filter ensures the selective response of the detector to carbon dioxide.
Characteristics:
- Precision: ± 1% full scale
- Field of measurement: 0-10% CO2
- Ambient temperature: from 5 to +35°C
O2 GAS ANALYSER
measurement of the percentage of oxygen present in the sample of air is carried out using an electrochemical cell.
A diffuser permits the air to flow over the cathode where oxygen is reduced to ions.
A diffuser permits the air to flow over the cathode where oxygen is reduced to ions.
Characteristics:
- Precision: ± 1% full scale
- Field of measurement: 0-25% O2
- Environmental temperature: from 5 to +35 °C
Electronic Control And Analysis Data Elaboration Apparatus
Technical Characteristics
Industrial PLC master connected with bus cable to the PLC slave of the plant and connected to the supervisor PC (NOT INCLUDED IN THE PRESEN OFFER) for recorder and set up of all the parameters
Microprocessor of last generation
Colour video 21"
Keyboard Digital cards I/O for the control and regulation of the analogical input parameters
Modem for data transmission
Basic Functional Characteristics
In the industrial computer we are using a new programme specifically designed for data management of an industrial plant or an experimental C.A. plant.
8 Analog input terminals with the possibility of insertion of an alarm set-point on all channels, in increase and decrease and relative print-out.
Control and scanning of the analysis of analog inputs
The equipment checks, at predetermined intervals, the calibration of the analysers and if necessary automatically corrects them.
Imposition of fixed parameters (configuration of the machine) and for the operator with video menu driven by the equipment.
functioning of the user machines is piloted by the computer with the possibility of varying the established data set-point.
DATA MANAGEMENT CHARACTERISTICS
Configuration of the plant parameters
Possibility of registering the plant
Set-up of the number of channels and the real numbering of the cells
Time variation of the analyses of each cell, depending on distance
The programme may be visualized in the language desired (normal production
Italian/English/French/Spanish)
Possibility to correct the errors on the temperature values due to the distance between the sensor and the computer.(also with MT card)
Configuration of the operator parameters
Cell programming (set point, regulation band, alarm band, alarm print-out, volume, quality
and quantity of stored products)
- Possibility of exclusion of one or more cells from the analysis cycle
- Programming of the automatic auto calibration (analysis interval, analysis time)
- Programming of data memorization ( sampling times)
- Possibility of four automatic print-outs of the last values memorized
Visualization and printing
Visualization of all alarms with specifications for the cell and for the input channel
- Visualization of the values of the last analyses for all the cells and for all channels
- Visualization of all the data memorized for the cell indicated during the period "x" indicated .
- For each specific cell, all data relative to the functioning of the output requested (ON and
1
-
-
... More
Tech assistance Fruit Control Equipment’s, Italy, CA Equipment’s for 24 Chambers including customs and freight Up to TKD CA doors– 24 Nos. including customs and freight Door Size 2.0 Mtr. x 3.0 Mtr. x 120 MM
The detailed technical equipment specification of CA DOORS is provided below
Name of Manufacturer - Foris Index/ METAFLEX/ Salco/ MTH /Equivalent approved by Engineer incharge
Size of the door - 2 x 3x 0.12
Insulation material & thickness -PUF x 120mm
Sealing type -Locking System
Density of PUF -40-42 KG/M2
Thermal resistance - 0.20w/m2k
Sighting Ports -Glass Hatch Window
Door Panel Thickness -120 mm
Perimeter and under door sealing gaskets
Openable porthole, with wooden structure and intrnal portective gaskets
Rings for padlockss
1
-
-
... More
PVC pipe with tee and bends for connecting main system with chambers & GI piping for hanging breathing bags with rope and clips
TEE Class-3 make Prince/Sagar -110 mm , 117 Nos
TEE Class-3 make Prince/Sagar - 15 mm, 33 Nos
Reducer Class-3 make Prince/Sagar - 110 x 75 - 22Nos
Reducer Class-3 make Prince/Sagar-110 x 63- 6 nos
Elbow Class-3 make Prince/Sagar -110 mm - 366 nos
Elbow Class-3 make Prince/Sagar- 63 mm - 10 nos
Elbow Class-3 make Prince/Sagar - 15 mm - 42 nos
Socket Class-3 make Prince/Sagar -110 mm -20 nos
Socket Class-3 make Prince/Sagar - 150 mm - 14nos
MTA Class-3 make Prince/Sagar - 15 mm -33 nos
MTA Class-3 make Prince/Sagar - 63 mm- 4nos
FTA Class-3 make Prince/Sagar - 15 mm - 6 nos
Tank nipple - Class-3 make Prince/Sagar - 15 mm- 31 nos
Make Prince/Sagar
PVC Pipe 6 Kg/cm2 - 110 mm - 1100 m
PVC Pipe 6 Kg/cm2 - 63mm - 48 m
PVC Pipe 20 kg/cm2 -15mm- 72 m
GI Pipe A class -15mm -216 m
wire rope 4 mm - 405m
D clamp - 6 mm-168 m
clamp for PVC pipe -110mm - 433 nos
clamp for PVC pipe-63 mm - 24 nos
clamp for PVC pipe -15 mm-36 nos
Strong weld solution -16 ltrs
Hack saw Blade - 40 Nos
Hack saw frame - 3 Nos
Dhoti - 20 Nos
Silicon Sealant - 60 Nos
Mastic gum - 2 Nos
Primer - 6 ltrs
Paint Black Enamel -Locking System -6 ltrs
Thinner synthetic - 6 ltrs
Brush 3" - 4 Nos 2" ACU drain Socket - 2 Nos 1-1/4" Hex Nipple Zinc coated 2 nos
1" Hex Nipple Zinc Coated - 2 nos
N2 & CO2 terminal box with 12 connector - 6 nos
Teflon tape - 30 nos
ISMC 75x 40 x 5 mm Total Channel - 102m
Angle 50x50x5 - 144 m
1/2" x 8mm pneumatic fitting 4 nos 1/2" Ball valve 1 nos
N2 Gen interconnection valve PVC - 2 nos
Gas sampling pipe 6-8 bar - 1082 m
1
-
-
... More
Control cables interconnecting between CO2 scrubber, N2 generator, GAC & chamber valves through junction boxes, 3-Phase distribution panel for the above, (supply to distribution panel in customer’s scope)
25 Sq. mm x 4 core x copper multistrand ( Kaesar to MCB box) - 20 m
2.5 Sq.mm x 4 core x copper multistrand (3 no. Scrubbers to MCB box & ELGI compressor) - 90 m
1.0 Sq.mm x 14 core x copper multistrand multi colour (Scrubber to Co2 & Scrubber to N2 valves)- 90 m
1.0 Sq.mm x 4 core x copper multisrand (N2 to Kaesar & N2 to GAC) - 120 m
25 Sq.mm Pin Type Thimble x copper (Kaesar & MCB termination) -50 Nos
2.5 Sq.mm Pin type Timble x copper ( Scrubber & MCB termination) - 50 Nos
Sensor cable 3 core x 0.25 sq mm shielded - 270 m
1 Sq.mm Pin Type x copper ((Scrubber Co2 & N2 termination) & Co2 & N2 terminal box termination) 200 nos
PG 16 gland - 20 Nos
1 Sq.mm 3 core copper cable - 271 m
Ethernet cable cat 6 - 200 m
PG 11 gland- 15 Nos
PG 9 gland - 15 Nos
Cable Tie 4 " - 6 Pkt
Cable Tie 6 " - 6 Pkt
Cable Tie 10 " - 6 Pkt
G.I cable tray 2" - 48 mtrs
MCB Box
2 pole MCB - 16 amps ( 2 N2 + 1 GAC) - 3 Nos
MCB - TPN - 16 amps (3 scrubber + 1 Elgi) - 4 Nos
MCB - TPN - 63 amps (2 Kaesar compressors (22 kw each) - 2 Nos
MCB - 4 pole - 100 amps - 2 Nos
24 way MCB box double door Heavy duty - 2Nos
1
-
-
... More
Installation / erection /commissioning of the above items for ntire system for CA Equipment & Door-24 Chambers
1
-
-
... More
Design, Detailing, Supply, erection, Testing and Commission of entire system for Air Compressor -2 Nos
The detailed technical equipment specification of Air Compressor is provided below
Make : Kirloskar / Frick / Metalex/ Superfreeze/MYCOM N6L/ Equivalent apprved by the Engineer Incharge Tank Capacity - 100 Litres
Motor Rating - 1.5 KW
Motor Make - Siemens, ABB, crompton Greaves / Equivalent approved by the Engineer Incharge
No of cylinders - 2
Operating pressure -6-8 bar
Maximum pressure -10 bar
Speed pump- 850 RPM
Weight -64 kg
Voltage -400 VAC
Current -3.6 A
Aspiration Capacity -220 L/min
Noise level -72 db atone metre
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for PUF Ceiling Panel 120 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides.(Thermal Conductivity (k-value) at +10°C (mean temperature) in W/m.K- 0.021 Wm/-K at mean temp of 23.9 Deg C and U-value {W/(m2K)}-0.21 w/m2k) . The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by Engineer Incharge
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 120 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.001
(-)25 Deg C- 0.001
(+) 38 Deg C & 90 % RH = 0.004
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
2220
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for PUF Outer Wall/Partition Panel 120 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides. (Thermal Conductivity (k-value) at +10°C (mean temperature) in W/m.K- 0.021 Wm/-K at mean temp of 23.9 Deg C and U-value {W/(m2K)}-0.21 w/m2k) The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by the client
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 120 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.001
(-)25 Deg C- 0.001
(+) 38 Deg C & 90 % RH = 0.004
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
7223
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for PUF Outer Wall/Partition Panel 80 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides.( Thermal Conductivity (k-value) at +10°C (mean temperature) in W/m.K- 0.021 Wm/-K at mean temp of 23.9 Deg C and U-value {W/(m2K)}-0.21 w/m2k ). The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Supply of Sandwich Make : JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by Engineer Incharge
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 80 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.001
(-)25 Deg C- 0.001
(+) 38 Deg C & 90 % RH = 0.004
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
1682.6
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for PUF Outer Wall/Partition Panel 50 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides. (Thermal Conductivity (k-value) at +10°C (mean temperature) in W/m.K- 0.021 Wm/-K at mean temp of 23.9 Deg C and U-value {W/(m2K)}-0.21 w/m2k - Sorting & Grading) The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Supply of Sandwich Make : JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by Engineer Incharge
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 50 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.001
(-)25 Deg C- 0.001
(+) 38 Deg C & 90 % RH = 0.004
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
847.7
-
-
... More
Supply of ancillaries items include Inner corner profile, External corner profile, Suspension profile, Suspension Rods, Anti-Bacterial Silicon Sealant Canner, PUR filling foam, Panel
11973.3
-
-
... More
Screws, Accessories Screws
11973.3
-
-
... More
Installation of Ceiling/Wall Panel
11973.3
-
-
... More
CA chamber painting
24
-
-
... More
CA chamber Door Installation
24
-
-
... More
Floor Insulation 100 mm PUF Slabs with Accessories( Ante room)
2724
-
-
... More
Installation Charges for Floor Insulation Works
2724
-
-
... More
Dock leveler - 6 MT
Make: Gandhi/ Metaflex/ Equivalent approved by the Enginner Incharge
Net Weight of Dock Leveller Platform Operation - Automatic through Hydraulic cylinder
Operation Control - Through control panel
Structure type - Completely frmaed structure
Platform size - 2000 mm x 2500 mm
Lip Size- 2000 mm x 400 mm
Shut height - 580 mm ./ Customaizable
Working length - 2900 mm
Overall size - 2000 mm x 2900 mm
Travel range - (+)300 mm / (-)250 mm
Clear pit dimensions - 2050 mm x 2500 mm x 585 mm
Loading platform height - 1250 mm - 1500 mm (As per client,s requirement)
Platform plate - 6 mm thk Antiskid chequered plate
Hinge pin - MS Bright bar for swinging of Lip and Platform
Power - 1.1 KW
Voltage -400 V
Current - 4.7 A/ 2.7 A
Frequency - 50 Hz
Flow rate - Min. 2.5 LP, - Max - 20.0 LPM
Pump pressure -160 Bar
Sfety valve set pressure -170 Bar
Hydraulic Oil tank capacity -7 Litres
Max Slope- 7 Deg
No of Platform cylinders -2 Nos
No of lip cylinders -1 No
Hydraulic hose length - 3 m
3
-
-
... More
Freight charge for Puff panels - CA
1
-
-
... More
Design, Supply, erection, testing and Commission of 11KV/433V, 630 kVA 3 phase HT Transformer with Oil Temperature Indicator., Earthing terminals - 3 nos., Pre-filled Silica-gel breather. Lifting lugs for complete transformer. Thermometer pocket., Oil filling pipe with cap on tank cover/conservator., HV TERMINALS with Porcelain Bushings, LV TERMINALS Indoor Type Porcelain Bushings with LT Cable box., Bi-metallic connectors on HT side., Oil level indicator on the Oil Conservator., 4 set of wheels for movement., Drain cum sampling valve - 1 no., Filter Valve with plug - 1 no., Pressure relief explosion vent with diaphragm, Externally operated off circuit tap changer switch with handle including all other accessories etc., complete
Make : Balaji Power/PUJ Power/ Kirloskar/ NGG POWER/ Aditya Electricals/Red Power/ Equivalent approved by The Engineer incharge
The technical Specification of 11KV/433V, 630 kVA 3 phase HT Transformer is provided below
Rating (KVA) - 630 KVA
No Load Voltage Ratio [KV]- 11 / 0.433 KV
Rated Current [Amp] - 33.06 / 840.04 Amps
Vector Group - Dyn11
Tapping Range- +5% to -10% @ 2.5%
Tap – Changer - Off Circuit Tap Changer
Steps - 6 Steps, 7 Positions
Temp. Rise (Oil/Wdg.) - 40 / 45 °C
Insulation Level - HV & LV: Uniform.
HV (KVp / KVrms) - 75 / 28
LV (KVp / KVrms) - NA / 3
TERMINATION: H.V / L.V
Paint - Cable Box / Cable Box Oil Temperature Indicator with A/T contacts - Epoxy to Shade 631 of IS 5
Winding Temperature Indicator with A/T contacts
Buchholz Relay with A/T contacts and with 1 Nos. Shut-off valves
Marshalling Box
Magnetic Oil Level Gauge with Alarm Contact
1 No. Neutral CT of ratio 630 / 1A, 5P20, 15VA
All following standard fittings will be provided in the transformer
Rating and terminal marking plate - 1No
Earthing terminals - 2 Nos
Lifting lugs - 2 Nos
Thermometer pockets - 1 No Air Release Device - 1 No Bottom channels - 1 Set
Drain valve with plug at Bottom - 1 No Filter valve with plug at top -1 No Oil conservator with drain plug - 1 No Oil filling hole with cap in Conservator - 1 No Plain oil level gauge - 1 No Dehydrating silica gel breather - 1 No Explosion vent with double diaphragm- 1 No Bi-directional Flat Rollers- 4 No
1
-
-
... More
Supply, Transportation unloading, installation, testing and commissioning of Double Pole Structure with the followings and including all other accessories etc.,
a) 200x100 RSJS- 2Nos
b) 11KV 400 Amps Atr Break switch - 1 Set of 3 Nos
c) 11KV Disc insulator- 3Nos
d) 11KV Pin Insulators- 3 Nos
e) 11KV, 9KA Lighting arrester- 3 Nos
f) 'O' SWG Copper rod
g) 100x50 ISMC -8nos of required length
h) M.S angles /MS Flat clamps of suitable sizes
i) 1 lot of Bolt & Nut , washers as required
1
-
-
... More
Design, Supply, erection, testing and Commission of 625kVA/500kW 3 phase DG, Prime Rated, Radiator cooled, powered by Diesel Engine coupled Alternator rated at 625kVA at 415Volts, microprocessor based Controller, Silencer, Anti-Vibration mountings, exhaust flexible connector, Batteries with cables, fuel tank, Acoustic Enclosure with MCP Panel and including all other accessories etc., complete.
The technical Specification of 625kVA/500kW 3 phase DG is provided below
Make: Kirloskar/ Cummins/ Cater Pillar/ Genlite/ Equivalent by Engineer incharge
Frequency - 50 Hz
Power Factor - 0.80 lagging
Voltage - 415 V
Governing class (As per ISO8528 Part-V) - G3
Noise Level - dBA 75
Fuel Tank Capacity - 990 Litre
Electrical Battery starting Voltage - 24 V
Rated Output - 552 Kw / 750 HP
No of cylinder - 8
Rated Speed - 1500 RPM
Lube Oil Change period - 500 Hour
Lube Oil Sump Capacity - 53 Litre
Coolant Capacity - 145 Litre
Insulation class - Class-H
Ingression Protection - IP 23
Permissible Voltage Dip at Full Load .080 pf Lag- ≤20%
Short Circuit Ratio - 0.414
1
-
-
... More
Design, Supply, erection, testing and Commission of 200 kVA/ 160 ekW 3 phase DG set, radiator cooled, powered by Diesel Engine coupled to alternator rated at 200 kVA at 415 Volts, microprocessor based controller, sub-base fuel tank , inbuilt antivibration mountings, with acoustic enclosure, with manual breaker panel and Sound proof canopy and including all other accessories etc., complete. The technical Specification of 200 kVA/ 160 ekW 3 phase DG set is provided below
Make: Kirloskar/ Cummins/ Cater Pillar/ Genlite/ Equivalent by Engineer incharge
Frequency - 50 Hz
Power Factor - 0.80 lagging
Voltage - 415 V
Governing class (As per ISO8528 Part-V) - G3
Noise Level - dBA 75
Fuel Tank Capacity - 850 Litre
Electrical Battery starting Voltage - 24 V
Rated Output - 184 Kw / 250 HP
No of cylinder - 8
Rated Speed - 1500 RPM
Lube Oil Change period - 500 Hour
Lube Oil Sump Capacity - 44 Litre
Coolant Capacity - 55 Litre
Insulation class - Class-H
Ingression Protection - IP 23
Permissible Voltage Dip at Full Load .080 pf Lag- ≤20%
Short Circuit Ratio - 0.55
1
-
-
... More
Supply, Transportation unloading, installation, testing and commissioning of Three Phase 630KVA Oil colled copper wound Servo Stabilizer with transformer oil design as per IS 9815/ 2026 including all other accessories etc., complete : Make: Jindal/Servo Star India/ Gaytri Industries/ Equivalent approved by the Engineer incharge
Frequency - 50 Hz
No of Phase: Three Phase
Termination - Porcelain Bushing (IS 3347)
Ovaer load Capacity: Tested to with stand over loading of 110% for 30minutes at 30 degree C ambien
Class of Insulation - A
Temp. Rise Permissible in Oil - 50 degree C
Core Architecture - For attaining high efficiency of the stabilizer we are stepped and mitered core architecture
Overload/ShortCircuit- Protection given by ACB capacity
High/Low Voltage Cut off - ThroughACB Input Low adjustable
OutputAccuracy - High accuracy with in +/-1variation
Unbalanced Condition- Independent phase control makes it suitable for unbalanced current load and input voltage supply.
Input Voltage beyond range - Lamp for each phase
1
-
-
... More
MV Panel: Supply, erection, testing and commissioning of cubicle floor/wall mounting type distribution panels with Aluminum / Copper busbars fabricated in standard sections, suitable for coupling at site comprising of TPN Aluminium busbars of suitable current rating for main and interconnecting busbars with busbars of equal size in all Phases and Neutral Neutral is half the rating of phase. Panel made out of 14 SWG sheet steel, reinforced angle iron frame work equipped with busbar chambers and cable chamber. Busbar shall be rated for 0.8A/sqmm. For Alu. & 1.6A/sqmm. For Cu. The power control centre shall comprise incoming and outgoing MCCBs as given below including all accessories like fuses interlocks etc.The incoming MCCB/ACB shall be designed for cable entry and the incoming / outgoing MCCB / MCBs shall be suitable for bottom / top entry only. All outgoing feeders shall be suitable for connecting XLPE armoured cable and with suitable gland plate of removable type. The power control centre shall be complete with earthing feeder identification markers, cable identifications, danger caution boards, wall/floor mounting channels. The complete board shall be manufactured as per the standard practice & shall meet the requirements of Local statutory and other relevant authorities. The rate shall be for the complete board including supply of all components, hardware's etc. including all connected civil works & as per specifications. MFM shall be with advance technology to monitor the unit on daily basis. All MCCBs shall be provided with Ex- operating handles and Spreader Link, Protection release as per BOQ
Make - Kabil Enterprises / CPRI Approved Panels / Equivalent approved by Engineer Incharge
MAIN MV PANEL ( I/C & O/G- Bottom)
EB INCOMER :
1 Nos.1000A 4P 50kA (Icu=ICS=ICW) Electrical Draw out type Air Circuit Breaker Micro processor based O/C, S/C, E/F Release, with U/V Coil & Shunt coil 1 set R,Y,B, On, Off & Trip indication lamps, 1 Set Maximum Demand controller with RS485(V,A,F,PF,W,VA,VAR, KWH, KVAH, KVARH) CL:1, 5A 230V Aux Supply
1 set Restricted Earth fault Relay
1 Set 1000/5A CL:1 15VA Resin cast Current transformer for MDC
1 Set 1000/5A CL:PS 15VA Resin cast Current transformer for REF
1 Set 600/5A, CL:1,15VA Resin cast Current transformer for APFC
1 NosTNC Switch, 1 No Auto / Manual Selector Switch
1 Nos 6A TP MCB for MDC & Phase Indication
2 Nos 6A DP MCB for U/V & Control Interlock
BUSBAR 1000A TPN Alu. Busbar 50KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
OUTGOING :
5Nos. 400A TPN 50KA (Ics) MCCB Micro processor based Adj O/C,S/C & E/F Release 1Nos 250A TPN 50KA (Ics) MCCB Micro processor based Adj O/C,S/C & E/F Release 2Nos 800A TPN 50KA (Ics) MCCB Micro processor based Adj O/C,S/C & E/F Release
Incoming and outgoing cables bottom entry
1
-
-
... More
Refrigeration Change Panel: Supply, erection, testing and commissioning of cubicle floor/wall mounting type distribution panels with Aluminum / Copper busbars fabricated in standard sections, suitable for coupling at site comprising of TPN Aluminium busbars of suitable current rating for main and interconnecting busbars with busbars of equal size in all Phases and Neutral Neutral is half the rating of phase. Panel made out of 14 SWG sheet steel, reinforced angle iron frame work equipped with busbar chambers and cable chamber. Busbar shall be rated for 0.8A/sqmm. For Alu. & 1.6A/sqmm. For Cu. The power control centre shall comprise incoming and outgoing MCCBs as given below including all accessories like fuses interlocks etc.The incoming MCCB/ACB shall be designed for cable entry and the incoming / outgoing MCCB / MCBs shall be suitable for bottom / top entry only. All outgoing feeders shall be suitable for connecting XLPE armoured cable and with suitable gland plate of removable type. The power control centre shall be complete with earthing feeder identification markers, cable identifications, danger caution boards, wall/floor mounting channels. The complete board shall be manufactured as per the standard practice & shall meet the requirements of Local statutory and other relevant authorities. The rate shall be for the complete board including supply of all components, hardwares etc. including all connetced civil works & as per specifications. MFM shall be with advance technology to moniter the unit on daily basis. All MCCBs shall be provided with Ex- operating handles and Spreader Link, Protection release as per BOQ
Make :L&T/ Seimens/ABB/Scheinders / Equivalent approved by Engineer Incharge
MAIN REFRIGERATION PANEL ( I/C & O/G- Bottom)
EB INCOMER :
1 Nos.800A 4P MCCB DG INCOMER :
1 Nos.800A 4P MCCB
BUSBAR 800A TPN Alu. Busbar 50KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
OUTGOING :
6Nos. 250A TPN 25KA (Ics) MCCB , 2Nos 630A TPN 25KA (Ics) MCCB INTERLOCK SYSTEM BETWEEN EB & DG INCOMER
Mechnical inlocking arrangements between EB & DG incomer with 2 locks& 1 key. So that one supply source can be operated at a time
The panel board shall be complete with interconnections with suitable size of aluminium bus bar and earthing
Incoming and outgoing cables bottom entry
1
-
-
... More
Supply, Transportation unloading, installation, testing and commissioning of Lighting Change over Panel with the followings all other accessories etc.,
Make :L&T/ Seimens/ABB/Scheinders / Equivalent approved by Engineer Incharge
Lighting Change Panel ( I/C & O/G- Bottom)
EB INCOMER :
1 Nos.400A 4P MCCB DG INCOMER : 1 Nos.400A 4P MCCB BUSBAR 400A TPN Alu. Busbar 25KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
OUTGOING : 3 Nos. 250A TPN MCCB INTERLOCK SYSTEM BETWEEN EB & DG INCOMER
Mechnical inlocking arrangements between EB & DG incomer with 2 locks& 1 key. So that one supply source can be operated at a time
The panel board shall be complete with interconnections with suitable size of aluminium bus bar and earthing
Incoming and Outgoing cables bottom entry
1
-
-
... More
150KVAR APFCR PANEL:Supply, unloading, installation, testing and commissioning of floor mounting cubicle type APFC panel switch board fabricated out of 16 Swg CRCA and powder coated to Siemens gray shade
Make - Kabil Enterprises / CPRI Approved Panels / Equivalent approved by Engineer Incharge
The Panel will be equipped with
INCOMING
1No.400A TPN 35KA (Ics) MCCB Thermal Magnetic based Adj O/C & S/C Release
1 set R,Y,B, on, off & Trip indication lamps
1 No 8 Stage APFC Relay CL:1, 5A 230V Aux Supply
APFC BUSBAR 400A TPN Alu. Busbar 35KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
APFC OUTGOING
4Set – 125A TPN 25KA MCCB and AC3 73A contactor with ON-OFF push / indication lamp and 25KVAR MDXL type capacitor bank
2Sets – 100A TPN 25KA MCCB AC3 70A contactor with ON-OFF push / indication lamp and 15KVAR MDXL type capacitor bank
2Set – 63A TPN 25KA MCCB AC3 70A contactor with ON-OFF push / indication lamp and 10KVAR MDXL type capacitor bank
Incoming and Outgoing cables Top/Bottom entry
2
-
-
... More
Supply, unloading, installation, testing and commissioning of Sub Panel - 1 (Greader m/cs) including all other accessories etc., Make - Kabil Enterprises / CPRI Approved Panels / Equivalent approved by Engineer Incharge
SUB PANEL - 1 INCOMER : 1Nos.630A TPN MCCB BUSBAR 630A TPN Alu. Busbar 50KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
OUTGOING : 13 Nos. 63A TPN MCCB The panel board shall be complete with interconnections with suitable size of aluminium bus bar and earthing
Incoming and Outgoing cables Top/Bottom entry
1
-
-
... More
Supply, unloading, installation, testing and commissioning of Sub Panel - 2 (CA M/CS) including all other accessories etc., Make - Kabil Enterprises / CPRI Approved Panels / Equivalent approved by Engineer Incharge
INCOMER : 1Nos.250A TPN MCCB BUSBAR: 250A TPN Alu. Busbar 50KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
OUTGOING : 6 Nos. 63A TPN MCCB The panel board shall be complete with interconnections with suitable size of aluminium bus bar and earthing
Incoming and Outgoing cables Top/Bottom entry
1
-
-
... More
Supply, unloading, installation, testing and commissioning of Sub Panel - 3 (Lift Panel) including all other accessories etc., Make - Kabil Enterprises / CPRI Approved Panels / Equivalent approved by Engineer Incharge
Incomer :1 No 250 A TPN MCCB
Bus bar: 250A TPN Alu. Busbar 50KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
Outgoing: 6 Nos 63A TPN MCCB
The panel board shall be complete with interconnections with suitable size of aluminium bus bar and earthing
Incoming and Outgoing cables Top/Bottom entry
1
-
-
... More
Supply, unloading, installation, testing and commissioning of Main Lighting Distribution Panel including all other accessories etc.,
INCOMER : 1Nos.250A TPN MCCB BUSBAR 250A TPN Alu. Busbar 25KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
OUTGOING : 8 Nos. 63A TPN MCCB The panel board shall be complete with interconnections with suitable size of aluminium bus bar and earthing
Incoming and Outgoing cables Top/Bottom entry
1
-
-
... More
Supply, unloading, installation, testing and commissioning of Cubical type free standing , floor mounting outdoor weather proof enclosure having canopy consisting of 1 no 1000A TPNACB fixed type to control the secondary of 630 KVA Transformer located in the outdoor transformer yard including all other accessories etc.,
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and commission of entire system for Sorting & Grading Line - CA . The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commissioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Apple Sorting and Grading Line 10 MT/Hr. x 4 lane Bin and Crate Tipper
Inspection Table
Brusher
Electronic Sizer
Packing Unit - 1 Set
Catwalk and Stairs
Bin Fillers - 5 Units
The detailed technical equipment specification of Sorting and Grading line is provided below
Make - Maf Roda / Ser Mac / GREFFA / ESHET EILON / Equivalent approved by the Engineer Incharge
Bin and Crate Tipper
1. Emptying: Electromechanical immersion with de-stacker, immersion rotation, restacking of bins
• Self-supporting gantry fixed to the ground
• Electrical cabinet
• Stacks 3 nos of 3 bins
• Movement of 2 axes: longitudinal and vertical
• Magnetic inductive circuit for automatic forklift detection
• Groove in floor to be done by customer
2. Tank, Flume a. Immersion tank with bottom plate – Stainless steel – 1650 x 1650 with legs
b. Straight tank, 1m long, height 0.3m width 1500, Stainless steel
c. Stainless steel immersion tank for crates (Box emptying in Water)
3. Pumps, Piping
a. Motor pump Group – Closed Turbine 200Cu.m/hr + Connections + Valves
b. PVC piping 200 Cu.m/hr, Diameter – 140mm
c. Water level detector and electrovalve
4. Motorized Boxes belt conveyor, 420 mm wide
a. Motorized collection belt conveyor: Driving and tension head for 400/420 mm wide
b. Linear meter for 400/420mm wide with antistatic belt
c. Belt option : Extra for grip faced belt (+20%)
d. Break belt with slope
e. Slides: Linear meter for empty box feed runner with sliding roller
5. Tank, Flume
• Standard outlet tank with legs, 1500 mm wide, SSConstruction, drainage sump.
6. Leaf Extractor
a. Leaf extractor with Intralox belt, weight 18” (Without tank)
b. Introduction kit of bins on the ground with cells
c. Water collecting tank, width 500mm, 3 m long, height 0.8m, SS Grade Removal
• Elevators out of Water: Elevators Elevator from water with anodized aluminum tubes, rising section 1,5 m, sorting section 1,5 m, width 1000 mm. Equipped with water rinse with electro valve and a leaf catchment tray. • Phase inverter switch STAINLESS STEEL frame
• Extra m of outlet elevator, 1000 mm wide
• Frequency vari
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for IQF - Sandwich PUF Wall Panel 120 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides- Frozen . The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by the Engineer Incharge
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 120 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.1%
(-)25 Deg C- 0.1%
(+) 38 Deg C & 90 % RH = 0.4%
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
1723
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for IQF - PUF Wall Panel 80 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides - Frozen . The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by the Engineer Incharge
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 80 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.1%
(-)25 Deg C- 0.1%
(+) 38 Deg C & 90 % RH = 0.4%
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
510
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for IQF - PUF Ceiling Panel 120 mm thick having 0.5 mm thick G.I. colour coated sheet on both sides. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by the Engineer Incharge
Density of PUF - 40-42 Kg/Cu.m
PUF Thickness -120 mm thick
Metal Skin- Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength - 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.1%
(-)25 Deg C- 0.1%
(+) 38 Deg C & 90 % RH = 0.4%
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method- Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
823
-
-
... More
Supply of ancillaries items include Inner corner profile, External corner profile, Suspension profile, Suspension Rods, Anti-Bacterial Silicon Sealant Canner, PUR filling
3879
-
-
... More
foam, Panel Screws, Accessories Screws
3879
-
-
... More
Installation of Ceiling/Wall & Floor Panel
3879
-
-
... More
Frozen Chamber Door with Heaters
4
-
-
... More
Raw Material Cold Store Door Chamber Door with Heaters
2
-
-
... More
Automatic Overhead Sectional Door
4
-
-
... More
Service Window
4
-
-
... More
Floor Insulation 120 mm PUF - Frozen
823
-
-
... More
Freight charge for Puff panels - IQF
1
-
-
... More
SCHEDULE-C2 - KHARAPATHAR
(HVAC Component): Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for Refrigeration System for Pre- Cooler. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
For Room Size – 5 Mtr. x 4 Mtr. x 3.5 Mtr.
Room Temp - 0 to 2 Deg. C
Incoming Temp. - 16 – 18 Deg. C
100 MM PUF PPGI
100 MM thick Sliding Door - Size 1200 x 2100 mm With Air Curtains.
With Strip Curtains
Daily Storage Qty. - 20 MT x 2 Batches
No. of Chambers - 03 Nos.
Pre- cooler volumetric capacity -5 m x 4 m 3.5 m
Unit package load -Boxes
Cooling system used -Room Cooling
Temperature levels -0-1 Deg C
RH Levels -90-95% relative humidity
Pull down time -8-10 hrs
No of batches planned in a day -2 batches in 24 hrs
Refreigeration Load -47 KW
Insulating material used -PUF and U Value 0.21 w/m2k
Air flow -20000 CMH
Static pressure -20 mm Hg
No of Fans -2 x 0.75 watts/ unit, Fan dia-500 mm
Water pump capacity -Humidifier used 5LPH
Refrigeration of condensation unit
Condensing unit type -25 kw x 2 Nos
Door details -Air cooled -1.0 m x 2.0m, Puf
Controls -Specify the electronic controller for room temperature and humidity monitoring & control
Refrigerant Used -R 404a
Total connected power -15 KW x 2 Nos/ chamber
Power generating unit
Condensing Unit x 2 Nos. per Chamber, (Capacity– 25 Kw x 2 Nos) - 6 Nos
Make of Condensing unit -Emerson / Danfoss / Equivalent approved by the Engineer Incharge
Model Name -KHZ595PAL - D5XXXX
Compressor Model -ZB95KQE - TFD - 551
Application Model -Medium Temperature
Refrigeration of condensing unit -25 kw x 2 No
Condensing unit type -air cooled
Door details -1 m x 2 m, PUF
Refrigerant used -R 404 A, NH3
Rated Voltage -380 V, 50 HZ, 3 Phase Cooling -Fan : 6200 Cu.ft/min
Total connected power -15 kw x 2 nos/ chamber
Total Power generating unit -100 kva
Condensing unit type -40 deg C
Air Volume -45000 Cu.m/hr
Fans -3 x 800 mm, Axial Fan, 900 rpm,Motor: 1.1 KW; 415V/3 Ph/50hZ
Water Flow -10 LPS
Pumps -1 No with 1.5 kw motor mono- block type
Coil data5/8" OD x 1mm thick SS 304L tubes
M.O.C -Case work: Powder Coated GI
Water Tank: SS 304
Fans : PAG Aerofoil type
Dry weight -1494 kg (Approx)
Air Cooling Unit x 2 Nos. per Chamber - (25 Kw X 2 Nos) - 3Nos
Make -Alfa laval/ Star Coolers/
Guntner / Equivalent approved by the Engineer Incharge
Type -Ceiling mounted cooler
Model No -CE - 3364 / Equivalent as per approved list
Dimensions -4188mm long x 823 mm Deep x 1055 mm High
No of units -1 No
Room Temperature -0 deg C
Design duty -25 Kw x 2 Nos. = 50 KW
Refrigerant -R-404 A (evaporating 2 -5 Deg C)
Air Flow -51000 CMH
Fans -3 x 710 mm, Axial Fan, 1440 rpm,Motor: 2.2 KW; 415V/3 Ph/50hZ
Coil data -4 FPI, 5/8" copper tubes with aluminium fins
Casework -GI White powder coated
Electrical Panel with Temperature Controller - 6Nos
Copper Piping, Suction Line Insulation and electrical wiring up to 6 mtr length - 6Nos
Expansion Valve -6Nos
Gas Charging -6Nos
Installation of machineries - 6Nos
Pressure Testing & Commissioning Charges - 6Nos
Chamber Lighting works - 10 W x 2 nos per Chamber - 3 Lot
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for 100 MM thick PUF Panel for Side Wall/Ceiling/Partition having 0.5 mm TCT, 120gsm, 240mpa, RMP Coated PPGL Sheet on Both Sides PUF Density 40 Kg/M3 +/-2 . The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Make - JINDAL/frick India/ RINAC/BNAL/SYNERGY / Equivalent approved by Engineer Incharge
Density of PUF- 40-42 Kg/Cu.m
PUF Thickness - 100 mm thick
Metal Skin - Hot Galvaized Metal, 22 micron poyester coated, white colour
Thickness of sheet - 0.5 mm
U Value - 0.21 W/m2
Compressive strength @ 10% deformation - 2.1 Kg/ Cm2
Adhesive strength- 3.0 kg/cm2
Tensile strength- 4.0 kg/cm2
Dimensionsal stability (48 hrs) - 0.001
(-)25 Deg C- 0.001
(+) 38 Deg C & 90 % RH = 0.004
Temperature range (-)180 to 100 Deg C
Thermal Conductivity at +10°C (mean temperature) 0.02 W/Mk
Type of fire protection - Self Extinguishing
Water absorbtion - 0.2% at max R.H. 98%
Joining method - Tongue and Groove, visibly no gap should be observed while joining two panels, else the particular panel will be rejected.
396
-
-
... More
50 MM + 50 MM thick PUF Slab for Floor Insulation
120
-
-
... More
Supply of Flashing Accessories
516
-
-
... More
Installation of PUF Panel
516
-
-
... More
Sliding Door 1200 x 2100 mm x 92 mm Thick for chambers 0-4 Deg C
5
-
-
... More
Strip Curtains
5
-
-
... More
Air Curtains
5
-
-
... More
Installation of Door
5
-
-
... More
Silicon and screw and door Bolt & nut
5
-
-
... More
Support Structure for ACU/Piping and CDU Supports
5
-
-
... More
Frieght Charges for PUF Panel
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for Material Handling System and Miscellaneous works. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Hand Pallet Jack Capacity - 2500 kg
Length of fork- 1150 mm
Fork Width -150 mm
Width across forks - 510 mm
Height of the lift - 205 mm
Lowered height - 85 mm
Overall length 1510 mm
Overall height - 1230 mm
2
-
-
... More
Manual Working Tables - 6 feet x 4 Feet x 3 Feet Height - SS 304 - 5Nos
5
-
-
... More
Pallat Jack Battery Operated - 1 No
Make -Godrej/ Mettler Toledo/ Equivalent approved by the Engineer Incharge
Load Capacity -2000 kg
Load centre 600 mm
Unladen weight including battery 640 kg
Axleloading 1045/1565 (Load front / rear)
Wheel type -PU
Wheel size -Front - 230 x 70 mm dia
Rear - 95 x 75 mm dia
Castor wheels - 90 x 50 mm dia
No . Of. Wheels Front - 1
Rear - 4
Cator Wheel - 2
Lift height -115 mm
Lowered forks height -90 mm
Lowered head length -619 mm
Overall width -726 mm
Fork Dimension -1120 x 170 x 60 mm
Travel Speed -4.5 km/h with load
6.5 km/h without load
Lift speed -0.11 m/s with load
0.15 m/s without load
Service brake -Electro magnetic
Drive Motor, S2 60 min rating -1.3 AC kw
Lift Motor, S3, 10 % rating -2 DC kw
Battery -24 V
Battery Weight -211 Kg
Type of drive control -AC - MOSFET
1
-
-
... More
esign, Supply, erection, testing and Commission of 11KV/433V, 250 kVA 3 phase HT Transformer with Oil Temperature Indicator., Earthing terminals - 3 nos., Pre-filled Silica-gel breather. Lifting lugs for complete transformer. Thermometer pocket., Oil filling pipe with cap on tank cover/conservator., HV TERMINALS with Porcelain Bushings, LV TERMINALS Indoor Type Porcelain Bushings with LT Cable box., Bi-metallic connectors on HT side., Oil level indicator on the Oil Conservator., 4 set of wheels for movement., Drain cum sampling valve - 1 no., Filter Valve with plug - 1 no., Pressure relief explosion vent with diaphragm, Externally operated off circuit tap changer switch with handle including all other accessories etc., complete
Rating (KVA) -250 KVA
No Load Voltage Ratio [KV] -11 / 0.433 KV
Rated Current [Amp] -13.12 /333.35 Amps
Vector Group -Dyn11
Tapping Range -+5% to -10% @ 2.5%
Tap – Changer -Off Circuit Tap Changer
Steps -6 Steps, 7 Positions
Temp. Rise (Oil/Wdg.) -40 / 45 °C
Insulation Level -HV & LV: Uniform.
HV (KVp / KVrms) -75 / 28
LV (KVp / KVrms) -NA / 3
TERMINATION: H.V / L.V Cable Box / Cable Box
Paint- Epoxy to Shade 631 of IS 5
Oil Temperature Indicator with A/T contacts
Winding Temperature Indicator with A/T contacts
Buchholz Relay with A/T contacts and with 1 Nos. Shut-off valves
Marshalling Box
Magnetic Oil Level Gauge with Alarm Contact
1 No. Neutral CT of ratio 630 / 1A, 5P20, 15VA
All following standard fittings will be provided in the transformer
Rating and terminal marking plate - 1No Earthing terminals - 2 Nos
Lifting lugs - 2 Nos
Thermometer pockets - 1No Air Release Device - 1No Bottom channels - 1Set
Drain valve with plug at Bottom- 1No Filter valve with plug at top- 1No Oil conservator with drain plug- 1No Oil filling hole with cap in Conservator- 1No Plain oil level gauge- 1No Dehydrating silica gel breather- 1No Explosion vent with double diaphragm- 1No Bi-directional Flat Rollers- 4No
1
-
-
... More
Supply, Transportation unloading, installation, testing and commissioning of Double Pole Structure with the followings and including all other accessories etc.,
a) 200x100 RSJS- 2Nos
b) 11KV 400 Amps Atr Break switch -1 Set of 3 Nos
c) 11KV Disc insulator- 3Nos
d) 11KV Pin Insulators- 3 Nos
e) 11KV, 9KA Lighting arrester-3 Nos
f) 'O' SWG Copper rod
g) 100x50 ISMC -8nos of required length
h) M.S angles /MS Flat clamps of suitable sizes
i) 1 lot of Bolt & Nut , washers as required
1
-
-
... More
Design, Supply, erection, testing and Commission of 160kVA phase DG, Prime Rated, Radiator cooled, powered by Diesel Engine coupled to Stamford/ Crompton Greaves Alternator rated at 160kVA at 415Volts, microprocessor based Controller, Silencer, Anti-Vibration mountings, exhaust flexible connector, Batteries with cables, fuel tank, Acoustic Enclosure with MCP Panel and including all other accessories etc., complete (Make: Kirloskar/Cummins/Cater Pillar/ Genlite/ Equivalent approved by the Engineer Incharge)
Frequency - 50 Hz
Power Factor - 0.80 lagging
Voltage - 415 V
Governing class (As per ISO8528 Part-V) - G3
Noise Level - dBA 75
Fuel Tank Capacity - 990 Litre
Electrical Battery starting Voltage - 24 V
Rated Output - 147 Kw / 250 HP
No of cylinder - 8
Rated Speed - 1500 RPM
Lube Oil Change period - 500 Hour
Lube Oil Sump Capacity - 44 Litre
Coolant Capacity - 55 Litre
Insulation class - Class-H
Ingression Protection - IP 23
Permissible Voltage Dip at Full Load .080 pf Lag- ≤20%
Short Circuit Ratio - 0.55
1
-
-
... More
Supply, Transportation unloading, installation, testing and commissioning of Three Phase 200KVA Oil colled copper wound Servo Stabilizer with transformer oil design as per IS 9815/ 2026 including all other accessories etc., complete
Frequency - 50 Hz
No of Phase: Three Phase
Termination - Porcelain Bushing (IS 3347)
Ovaer load Capacity: Tested to with stand over loading of 110% for 30minutes at 30 degree C ambien
Class of Insulation - A
Temp. Rise Permissible in Oil - 50 degree C
Core Architecture - For attaining high efficiency of the stabilizer we are stepped and mitered core architecture
Overload/ShortCircuit- Protection given by ACB capacity
High/Low Voltage Cut off - ThroughACB Input Low adjustable
OutputAccuracy - High accuracy with in +/-1variation
Unbalanced Condition- Independent phase control makes it suitable for unbalanced current load and input voltage supply.
Input Voltage beyond range - Lamp for each phase
1
-
-
... More
Main M.V Panel: Supply, erection, testing and commissioning of cubicle floor/wall mounting type distribution panels with Aluminum / Copper busbars fabricated in standard sections, suitable for coupling at site comprising of TPN Aluminium busbars of suitable current rating for main and interconnecting busbars with busbars of equal size in all Phases and Neutral Neutral is half the rating of phase. Panel made out of 14 SWG sheet steel, reinforced angle iron frame work equipped with busbar chambers and cable chamber. Busbar shall be rated for 0.8A/sqmm. For Alu. & 1.6A/sqmm. For Cu. The power control centre shall comprise incoming and outgoing MCCBs as given below including all accessories like fuses interlocks etc.The incoming MCCB/ACB shall be designed for cable entry and the incoming / outgoing MCCB / MCBs shall be suitable for bottom / top entry only. All outgoing feeders shall be suitable for connecting XLPE armoured cable and with suitable gland plate of removable type. The power control centre shall be complete with earthing feeder identification markers, cable identifications, danger caution boards, wall/floor mounting channels. The complete board shall be manufactured as per the standard practice & shall meet the requirements of Local statutory and other relevant authorities. The rate shall be for the complete board including supply of all components, hardware's etc. including all connected civil works & as per specifications. MFM shall be with advance technology to monitor the unit on daily basis. All MCCBs shall be provided with Ex- operating handles and Spreader Link, Protection release as per BOQ
I/C (EB): 1 No 400A 4P MCCB with 50KA with U/V Release, E/F Relay I/C (DG): 1 No 250A 4P MCCB with 50KA with U/V Release, E/F Relay Inter locks : Mechanical interlocking with 2 locks and 1 key , so that only one supply source can be operated at a time.
Bus bar: 400 A Aluminium bus bars Out goings : 12 Nos 63 A TPN MCCB and as per standrad specifications.
Incoming and outgoing cables bottom entry
1
-
-
... More
APFCR Panel " 30 KVAR ( 4 X 5 KVAR Units, 4 X 2.5 KVAR Units)
Supply, unloading, installation, testing and commissioning of floor mounting cubicle type APFC panel switch board fabricated out of 16 Swg CRCA and powder coated to Siemens gray shade. The panel will be equipped with 1 No 125 A TPN 35 KA(ICS) MCCB
1 set R,Y,B, on, off & Trip indication lamps
1 No 8 Stage APFC Relay CL:1, 5A 230V Aux Supply
APFC BUSBAR 250A TPN Alu. Busbar 35KA per 1 Sec. All the neutral busbars shall have half the capacity of phase busbars
APFC OUTGOING
8Nos– 32A TPN 25KA MCCB Thermal Magnetic based Adj O/C & S/C Release and AC3 73A contactor with ON-OFF push / indication lamp and 25KVAR MDXL type capacitor bank
Incoming and outgoing cables bottom entry
Frieght Charges
1
-
-
... More
Frieght Charges for Generator, Transformer, Panel Boards etc.,
1
-
-
... More
Design, Detailing, Approval of Client, Supply, erection, Testing and Commision of entire system for Reefer Vans. The approximate BOQ of the item is provided below. Any additional material or consumables required are deemed to be included in this item. The contractors responsibility to ensure all the required items including erection, building, consumables like oil, Bolt, Nut, painting. etc., complete for effective commisioning of the system. All GTP is to be approved by PMC/ Engineer incharge befor supply and Predispatching Stage.
Truck for 9 ton Tata LPT3521/68 COWL CHS for 35ton
Make and Engine Model -TATA - LPT 3521/68 COWL CHS & SIGNA 3521.T 5L TURBOTRONN BS6 / Equivalent approved by the Engineer Incharge
Gross vehicle weight --35000 kg
Engine -TATA 5.0 L Turbotronn / Equivalent approved by the client
Max Power -147 kw @2200 r/min
Max Torque -850 NM @1100-1600 r/min
Clutch - 380mm dia push type single plate dry friction organic lining
Transmission -TATA G950 6F + 1R Manual Synchromesh
Frame -Ladder type, Heaby Duty Fame, 285 x 65x 8.5
CAB/ COWL -COWL & SIGNA
Ventilation -COWL- Blower, SIGNA - Blower and AC
Emission Control -EGR+DOC+DPF+SCR+AMOX
Fuel tank -365 L Polymer with anti fuel theft
Dock length option -6706 mm , 7315 mm1 8230 mm , 9750 mm
Engine Power -147 KW
Rated payload-35 tons
Outer dimensions - 9.75 m x 2.54 m x 2.7 m
Total no of tyres- 12
2
-
-
... More
Cabinet 32' x 8'.4’’ x 8’.10’’ (LxWxH) - External Size
Manufacturer Name -KOLD SEAL / Equivalent approved by the client
Size -32' x 8.4" 8'10"
External skin -HR - 1.2 mm (Corrugated)
Internal Skin -SS - 0.5 mm
Panel thickness -120 mm all sides
Density -40+/- kg/cu.m
Lock set -Galvanized Iron
Insulated Material and cladding -PUF x 120 mm x U Value 0.21 w/m2k
Flooring details -T section / U Section
2
-
-
... More
Refrigeration unit – HT – 70 DWES make Hwasung
Make & model -HWASUNG HT 70 DWES / Equivalent approved by the client
Refrigerant used -R 404 A
Ozone protection
Chlorine free
Charge: 6.8 kg
Refrigeration capacity -9.5 kw
Yanmar Diesel Engine (Made in Japan) -3TNV - 82A, clean and silent engine
3 Cylinder, liquid cooled
1331cc(81.2 Cu.inch) displacement
1 litre oil capacity
Compressor -BOCK 470 TK compressor (Made in Germany)
4 Cylinders, 500 cc (30.5 ci.inch) displacement
2.6 liters oil change
Corrosion and rust free for long lasting appearance -FRP front cover and side doors
Aluminium evaporator case
Stainless muffler, Surge tank, eva.guard, acculumator, receiver tank, accumulator Shaft driver two fan system evaporator
Airflow volume approx. -5000 Cu.m/h by 290mm diameter dual fans
Control valve -Three way
AC Electric motor -HT- 70DWES Mega - Fonly
12 HP, High performance AC motor
220 V/380V/415V, 3Phase, 50/60 Hz
Evaporator Protection guard -Aluminium guard protection
Defrosting system -Auto defrosting system used
Air flow and pattern -top - down
Total power consumption -9.52 KW
Storage capacity -20 MT
Weight (Approx.) -HT- 70DWES Mega - F - 640 kg
No of Vehicles -2
2
-
-
... More
Frieght Charges for entire system for Reefer Van
1
-
-
... More
SCHEDULE-D-PARALA -FIRE FIGHTING Supply, Erection, testing & commissioning of electrical motor driven Hydrant Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel, foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC foundation is under civil scope.
1
-
-
... More
Supply, Erection, testing & commissioning of electrical motor driven Sprinkler Pump of horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling, coupling guard and base plate for pump, fabricated mild steel channel,foundation bolts, and pump should have the dry run sensor provision, etc., as per local fire brigade requirement . The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall be coupled to electrical motor of 65 HP with speed of 2900 RPM, Electric supply 415V, 50 Hz and complete set shall be mounted on a common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC foundation is under civil scope.
1
-
-
... More
Supply, Erection, testing & commissioning of Diesel Engine driven common stand by pump, horizontal centrifugal end suction backpull out type with gland packing and capable to deliver 2280LPM (137 m³/ Hr) at 70MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting, coupling, gear box, base plate for pump, fabricated mild steel channel with foundation bolts etc., It includes providing and fixing fuel oil tank (capacity as per TAC requirements) with supports and necessary pipe works for diesel engine, battery and battery charger to be connected to control panel of diesel engine and exhaust silencer including necessary pipe work and lagging, pump should have the dry run sensor provision, etc., and shall be automatic in operation diesel engine control panel with 24V DC storage battery & its battery charger with required Ampere - hour rating, terminal box (2 nos. of 12volts), cooling water line for engine with required pipes / valves / fittings etc., as per TAC including all associated electrical works. The pump shall capable to have 3.5 kg/cm² residual pressure at top most hydrant point. The pump shall coupled to Diesel engine, radiator water cooled type with speed of 1800RPM and complete set shall be mounted on common base frame. Batteries & battery leads with stand, 200 liters capacity Fuel tank ( for 4 Hrs. operation ) with stand & gauge glass, Fuel piping with valves. The quoted rate shall includes radiator water cooling piping(if required) coupling gaurd and other stanadrd accessories and foundation bolts, etc. complete. RCC foundation is under civil scope.
1
-
-
... More
Supply, erection, testing & commissioning of electrical motor driven Jockey pump of horizontal centrifugal end suction back pull out type with gland packing and capable to deliver 180LPM (10.8 m³/ Hr) at 70 MWC with all necessary accessories like bronze impeller, stainless steel shaft and mechanical seal along with anti-vibration mounting pad and flexible connections at discharge end of the pipes, pump should have the dry run sensor provision etc. and shall be automatic in operation.The pump shall be coupled to motor of 15 HP with speed of 2900RPM and complete set shall be mounted on common base frame. The quoted rate shall includes providing & fixing of coupling, coupling gaurd and Foundation bolts etc. RCC foundation is under civil scope.foundation is under civil scope
2
-
-
... More
Control Panel for Fire pumps.
Fabrication, Supplying, Installation, Testing & Commissioning of electrical control panel, of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection, having switchgears and accessories mounting and internal wiring, earth terminals, numbering etc. complete in all respects, suitable for operation on 415 V, 3 phase, 50 HZ. AC supply with enclosure protection class IP 42 as required.
(i) INCOMER
(a) 400 Amps. 4 Pole MCCB, 36 KA Thermal Magnetic type with operating handle mechanism and changeover interlocking etc. and necessary accessories (b) Voltmeter (0-500 Volts) with selector switch.
(c) Ammeter (0- 500Amps.) with selector switch & CT's etc.
(d) Set of 3 Phase indicating lamp. (e) Set of AJ.bus bar Amps.
(ii) OUTGOING.
(a) Hydrant pump.
125 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism and necessary accessories with 65 HP fully automatic star/ delta starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFFoperation.
(b) Sprinkler pump.
125 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism and necessary accessories with 65 HP fully automatic star/ delta starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFFoperation.
(c) Jockey pump for Hydrant
32 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism and necessary accessories with 15 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFFoperation.
(d) Jockey pump for Sprinkler
32 Amps. 4 Pole MCCB, 25 KA Thermal Magnetic type with operating handle mechanism and necessary accessories with 15 HP fully automatic DOL starter with over load protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFFoperation.
1
-
-
... More
Diesel Engine Control.
Control for Diesel Engine comprising:-
(i) Auto/Manual selector switch & 3 attempt starting device, timers and relays as required, push buttons, start/stop in manual mode.
(ii) Indication lamp for High/Low Lub.oil pressure, High Water Temp.and Engine ON indication.
(iii) Battery charger suitable for 12 V/ 24 V DC with boost and tickle selector switch, 0-30 V DC'volt meter, 0-20A DC Ammeter.
(iv) AII standard relays and accessories for automatic operation of diesel engine.
1
-
-
... More
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 2R x 3.5 core x 50 sqmm Aluminium conductor cable for Electrical motor Driven pump.
40
-
-
... More
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 4 core x 16 sqmm Aluminium conductor cable for Jockey Pump.
30
-
-
... More
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 12 core x1.5 sqmm Copper cable for Diesel Engine pump
20
-
-
... More
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 2 core x 1.5 sqmm Copper cable for pressure switch
40
-
-
... More
Supplying, laying, testing & commissioning of FRLS, XLPE insulated, PVC outer sheateh, steel armoured, aluminium / copper conductor, 1100v grade power cables with glands etc. The cables shall be laid in tray / Hume pipe / in trenches/on walls/ floor etc. as required. For cables laid out door the rate shall include earth excavation providing brick and sand protection, refilling and compacting the earth.The rate shall excludes tray & Hume pipes. 4 core x 2.5 sq mm Copper cable for MCC to ESP interlocking.
20
-
-
... More
Supplying and fixing of perforated G.I.sheet cable tray with neccessory angle iron suspension supports, anchor fasteners etc. complete. Maximum height of suspension shall not exceed 500 mm.Size of the tray shall be suitable for laying the above mentioned cables.
50
-
-
... More
G.I. Earthing strips of 50mm x 6mm thick, strip shall be run on floor / ceiling / walls, from the equipment to the nearest Earth pit with necessory accessories as required.
60
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 250mm nominal dia
18
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 200mm nominal dia
18
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 150mm nominal dia
18
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 100mm nominal dia
24
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 80mm nominal dia
12
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 50mm nominal dia
12
-
-
... More
Supplying, installing, testing and commissioning of G.I Pipes, ERW confirming to IS 1239 Pt - I Class 'C' Heavy grade up to 150mm dia and pipes 200mm dia and above shall be G.I as per IS: 3589 (6mm Wall thick) with painting, suitable type of supports, anchor fasteners, bolts nuts ( Galvanised), clamps, "U" bolts, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, complete. 25mm nominal dia
30
-
-
... More
Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312 swing check type with required flanges, nuts, bolts and gaskets etc. complete. 200 mm nominal dia
1
-
-
... More
Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312 swing check type with required flanges, nuts, bolts and gaskets etc. complete. 150 mm nominal dia
3
-
-
... More
Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312 swing check type with required flanges, nuts, bolts and gaskets etc. complete. 80 mm nominal dia
2
-
-
... More
Supplying, installing testing and commissioning of C.I. flanged Y-type Strainer with SS screen complete with suitable flanges, nuts, bolts, gaskets etc. complete. 200mm nominal dia
3
-
-
... More
Supplying, installing testing and commissioning of C.I. flanged Y-type Strainer with SS screen complete with suitable flanges, nuts, bolts, gaskets etc. complete. 100mm nominal dia
2
-
-
... More
Supply, Erection, Testing and commissioning of C.I. Sluice valves as per IS:14846 Rating (for delivery side of the pumps) and Non rising spindle type with flanges, bolts, nuts, washers, gaskets etc. 250mm nominal dia
2
-
-
... More
Supply, Erection, Testing and commissioning of C.I. Sluice valves as per IS:14846 Rating (for delivery side of the pumps) and Non rising spindle type with flanges, bolts, nuts, washers, gaskets etc. 200mm nominal dia
4
-
-
... More
Supply, Erection, Testing and commissioning of C.I. Sluice valves as per IS:14846 Rating (for delivery side of the pumps) and Non rising spindle type with flanges, bolts, nuts, washers, gaskets etc. 150mm nominal dia
3
-
-
... More
Supply, Erection, Testing and commissioning of C.I. Sluice valves as per IS:14846 Rating (for delivery side of the pumps) and Non rising spindle type with flanges, bolts, nuts, washers, gaskets etc. 100mm nominal dia
6
-
-
... More
Supply, Erection, Testing and commissioning of C.I. Sluice valves as per IS:14846 Rating (for delivery side of the pumps) and Non rising spindle type with flanges, bolts, nuts, washers, gaskets etc. 80mm nominal dia
2
-
-
... More
Supply, Erection, Testing and commissioning of C.I. Sluice valves as per IS:14846 Rating (for delivery side of the pumps) and Non rising spindle type with flanges, bolts, nuts, washers, gaskets etc., complete. 50mm nominal dia
2
-
-
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 25 mm nominal dia (for pressure switch manifold & air vessel tank)
6
-
-
... More
Supply and installation of differential Pressure switches of suitable range (0 to 12 bar) for pumpsets complete with necessay Ball valves, Fittings like unions / colors / reducers etc., Complete.
5
-
-
... More
Supply and installation of Pressure gauges of suitable range (0-16 bar), 150 mm diameter dial for pumpsets completes with necessary Ball valves, siphon, Fittings like unions / colors / reducers etc., Complete.
7
-
-
... More
Supply, fixing, testing and commissioning of air vessel tank shall be fabricated out of of 250 mm dia MS pipe to 1000 mm long complete with 25mm inlet, 25mm drain, 25mm dia connection for air release valve including legs, painting with red oxide primer and finished with fire red enamel paint. It shall be inclusive of all relevant pipes, valves, specials upto pump header and other accessories etc., complete.
1
-
-
... More
Exhuast pipe for Diesel engine of 100 mm dia M.S. Medium grade with mineral wool insulation with aluminum sheet. The quoted rate shall include 100 mm diameter MS pipe medium grade conforming to IS 1239 Part-1 and mineral wool insulation with aluminum sheeting and Pipe supports also.
25
-
-
... More
Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for supporting suction and delivery pipe of each fire pump and delivery pipe to hydrant within the pump room.
500
-
-
... More
Supplying, installing, testing and commissioning of 150mm nominal dia M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material etc., complete.
522
-
-
... More
Supplying, installing, testing and commissioning of 100mm nominal dia M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material etc., complete.
222
-
-
... More
Supplying, installing, testing and commissioning of 80mm nominal dia M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material etc., complete.
30
-
-
... More
Supplying, installing, testing and commissioning of 25mm nominal dia M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material etc., complete.
12
-
-
... More
Supply, Installing, testing and commissioning of Heavy class 150mm nominal dia M.S pipe, Heavy grade (Class-C) ERW (as perIS-1239) laid in under ground (1 Mtrs below ground level. Rate quoted shall include for necessary specials like long radius bends, tees, including cutting, welding/flanged joints with necessary washers, nuts, bolts, etc. The quoted rate shall inclusive of Wrapping & Coating for Under ground Pipe. This corrosion protection tape shall comprise coal tar component supported on fabric of organic (or) inorganic fibre and minimum 4mm thick and shall conform to requirement of IS:10221 code of practice for coating and wrapping of under ground pipes line.
54
-
-
... More
Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312 swing check type with required flanges, nuts, bolts and gaskets etc. complete. 150mm nominal dia (Four Way FBI)
1
-
-
... More
Supplying, installing, testing and commissioning of C.I. Non-return valves as per IS:5312 swing check type with required flanges, nuts, bolts and gaskets etc. complete. 100 mm nominal dia (Terrace)
1
-
-
... More
Supplying, Installing, testing and commissioning C.I. butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete. 150mm nominal dia
7
-
-
... More
Supplying, Installing, testing and commissioning C.I. butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete. 150mm nominal dia (Four Way FBI)
2
-
-
... More
Supplying, Installing, testing and commissioning C.I. butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete. 100mm nominal dia (Terrace)
3
-
-
... More
Supplying, installing and commissioning C.I. flanged "Y" type Strainer with SS screen, suitable flanges, nuts, bolts, gaskets etc. complete. 100mm nominal dia. (Terrace)
1
-
-
... More
Supplying, installing and commissioning of fire brigade inlet connection of 4 way with 1 no. 63 mm dia. built - in Gun metal instantaneous coupling type arranged on 150 mm dia. Quoted rate shall be included M.S. cabinet of suitable size with mounting supports etc. complete.
2
-
-
... More
Supplying, erecting and commissioning of Single headed hydrant valve as per IS 5290, made of gunmetal with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc complete.
13
-
-
... More
Supplying, erecting and commissioning of 15 M long, 63mm dia RRL hose conforming to IS 636 Type A with instantaneous couplings and Hoses shall be stored inside fire duct on wall with firmly fastened steel rod etc complete.
26
-
-
... More
Supplying, erecting and commissioning of Gun metal short branch pipe with nozzle conforming to IS 903 etc complete.
13
-
-
... More
Supplying, erecting and commissioning of M.S. Hose Box stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside etc., complete.
13
-
-
... More
Supplying, erecting and commissioning of Single headed hydrant valve as per IS 5290, made of gunmetal with 63 mm dia instantaneous outlet of 80 mm dia fanged inelt ,Blank caps , chain and hand wheels etc., complete.
8
-
-
... More
Supplying, erecting and commissioning of 15 M long, 63mm dia RRL hose conforming to IS 636 Type A with instantaneous couplings and Hoses shall be stored inside fire duct on wall with firmly fastened steel rod etc., complete.
16
-
-
... More
Supplying, erecting and commissioning of Gun metal short branch pipe with nozzle conforming to IS 903 etc., complete.
8
-
-
... More
Supplying, erecting and commissioning of First aid Hose reel drum of 180° swinging type with 19mm dia Rubber braided hose of 30M. length with Ball Valve and 6mm diameter Shut off nozzle etc., complete.
8
-
-
... More
Supplying, erecting and commissioning of M.S. Hose Box stand mounted type fabricated out of M.S. sheet of 16 swg. with glass fronted ( 4mm thick glass with rubber beeding) door and size of the cabinet shall be 600mm x 750 mm x 250 mm Quoted rate shall be includes suitable stand for mounting, all fasteners etc, and cabinet shall be powder coated of approved colour both inside and outside etc., complete
8
-
-
... More
Supplying and fixing approved make of 25mm dia automatic air release valve spring loaded type complete with unions etc. complete.
3
-
-
... More
Supplying, installing, testing and commissioning of 25mm nominal dia Gun metal chrome finished Ball valves with fittings of screwed end type.
3
-
-
... More
Supplying and erecting of Pre fabricated M.S structural steel supports such as angle, Channel, Plate etc. conforming to relevant IS standards for laying above ground Hydrant Pipe etc., complete.
1000
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 150mm nominal dia
372
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 100mm nominal dia
60
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 80mm nominal dia
174
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 65mm nominal dia
192
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 50mm nominal dia
342
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 40mm nominal dia
642
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 32mm nominal dia
714
-
-
... More
Supplying, installing, testing and commissioning of M.S Pipes confirming to IS 1239 Pt - I Class 'C' Heavy grade, ERW, above ground pipe with painting, suitable type of supports ( Shall be fabricated by M.S. Channel / Angle / Flat for above 50 mm dia), Threaded rod, anchor fasteners, bolts, nuts, clamps, "U" bolt, malleable specials such as Reducers,Tees, elbows, flanges. Including cutting, Welding, fixing in / on walls, ceiling by using suitable supports etc, . The quoted rate shall also include for chasing / chipping walls, making bore holes in walls and making them good with filler material. 25mm nominal dia
1158
-
-
... More
Supplying, Installing, testing and commissioning of 150 mm nominal dia C.I wafer type butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.
10
-
-
... More
Supplying, Installing, testing and commissioning of 100 mm nominal dia C.I wafer type butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.
1
-
-
... More
Supplying, Installing, testing and commissioning of 80 mm nominal dia C.I wafer type butterfly valves as per IS 13095 slim seal standared lever operated type with required flanges, nuts, bolts etc. complete.
1
-
-
... More
Supplying, installing, testing and commissioning conventional Pendent Sprinkler quartzoid bulb type with 15mm screwed end connection of 68 deg. C. temperature rating, K 80 and orifice shall not be less than 12.7mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.
112
-
-
... More
Supplying, installing, testing and commissioning conventional Pendent sprinkler quartzoid bulb type with 20mm screwed end connection of 68 deg. C. temperature rating, K 115 and orifice shall not be less than 13.5mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.
351
-
-
... More
Supplying, installing, testing and commissioning conventional Pre action Pendent Sprinkler quartzoid bulb type with 20mm screwed end connection of 68 deg. C. temperature rating, K 115 and orifice shall not be less than 13.5mm.Sprinklers shall be UL Listed / FM approved with Chrome finished.
440
-
-
... More
Supplying, installing, testing and commissioning of Hydraulically operated Alarm Control valve complete with Ductile iron body & clapper conforming to ASTM A536 with water motor gong bell and basic trims as required, pressure gauges, pressure swich, drain valves etc. complete. The alarm valve shall be UL Listed / FM approved. 150 mm dia
2
-
-
... More
Supplying, installing, testing and commissioning of factory assembled packaged preaction system complete with Pre action valve, air compressor, riser check valve, powder coated cabinet with Ductile iron body & clapper conforming to ASTM A536 with water motor gong bell and basic trims as required, pressure gauges, pressure swich, drain valves etc. complete with all accessories. 150 mm dia.
2
-
-
... More
Supplying, installing, testing and commissioning of flow switch (water flow detector) on sprinkler distribution header on each floor and shall be connected to Sprinkler annunciation panel for monitoring the status of the flow switch. 150 mm nominal dia
5
-
-
... More
Supplying, installing, testing and commissioning of flow switch (water flow detector) on sprinkler distribution header on each floor and shall be connected to Sprinkler annunciation panel for monitoring the status of the flow switch. 100 mm nominal dia
1
-
-
... More
Supplying, installing, testing and commissioning of flow switch (water flow detector) on sprinkler distribution header on each floor and shall be connected to Sprinkler annunciation panel for monitoring the status of the flow switch. 80 mm nominal dia
3
-
-
... More
Supplying and fixing approved make 25mm dia. automatic air release valve with unions etc. complete.
4
-
-
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 50mm dia.(Drain connection)
9
-
-
... More
Supplying, installing, testing and commissioning of Gun metal chrome finished Ball valves with fittings of screwed end type. 25mm dia. (For air release valve)
4
-
-
... More
Stainless steel corrugated flexible pipe(hose) for dropping sprinklers below false ceiling, pipe shall be 16 bar pressure rating and 1500 mm long 25 mm dia with union / reducer collar, clamps etc. as required.
1
-
-
... More
Supply & fixing of approved type rosette plates ( Surface mounted type, in two piece) for Sprinklers below false ceiling area. The Rosette shall be fabricated by M.S. plate of 2mm thick and the finish shall be powder coated and color shall be as approved by Engineer.
5
-
-
... More
Addressable intelligent 4- Loop Fire Alarm Control panel with voice evaucaution system with 48 hours battery back up in standby and 30 minuts in alarm condition and battery charger. The panel shall consisting with 80 character LCD display, Network card and RS 485 for networking. 125 detectors & 125 devices can be connected to one loop. The FACP shall be LPCB / UL/FM/EN approved make..
1
-
-
... More
Supplying, installing, testing and commissioning of photo electric (optical) smoke detector with base, junction box and other accessories (Below false ceiling ) etc., complete.
221
-
-
... More
Addressable rate of rise Heat detector with base, Junction box and other accessories as required.
9
-
-
... More
Response indicator for all detectors located above false ceiling / false floor etc., completed
1
-
-
... More
Analogue Addressable Fault isolator module capable of monitoring shorted loop circuit and automatically restore communications when shorted conditions are corrected etc., complete.
14
-
-
... More
Analogue Addressable Input/Output Module or control module for Lift shut down & connecting conventional devices with fire alarm system (Hooter) etc., complete.
8
-
-
... More
Analogue Addressable single Input Module for integrating conventional Sprinkler Flow Switch, pump run & ON status of fire pumps and other conventional devices with fire alarm control panel etc., complete.
24
-
-
... More
Supplying, installing, testing and commissioning of Conventional sounder cum strobe etc., complete.
16
-
-
... More
Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box. Back box will be flushed on wall etc., complete.
16
-
-
... More
Supplying and laying of 2 core x 1.5 mm², Armoured, FRLS, PVC insulated copper conductor cable confirming to relevant IS standards etc., complete.
5000
-
-
... More
Supplying, installing, testing and commissioning of power supply unit which provides 24V DC output for connecting all relay control modules and other modules. one number of 7AH battery with all accessories and multiple terminal connections. The power supply unit will be located in BMS room at ground floor and in designated location preferably near to FA/PA shaft in typical floors etc., complete.
1
-
-
... More
Supplying, installing, testing and commissioning of 8-zone selector with P.A console with feather type Switches and all accessories etc., complete.
1
-
-
... More
Supplying, installing, testing and commissioning solid state Amplifier of 500 W RMS out put in rack, including necessory control wires, jacks etc. complete.
1
-
-
... More
Supplying, installing, testing and commissioning of 6W RMS, 110V, 106dB sound level wall mounted horn speaker with all mounting accessories etc., complete.
42
-
-
... More
Supplying, installing, testing and commissioning of 6W RMS, 110V, 106dB sound level Ceiling speaker with all mounting accessories etc., complete.
1
-
-
... More
Supplying, installing, testing and commissioning of 2Cx1.5 mm², Armoured, FRLS, PVC insulated annealed tinned copper conductor cable confirming to relevant IS standards etc., complete.
2000
-
-
... More
Providing and Fixing of Gooseneck Microphone with call station. Features : Dynamic Directivity: Cardioid Frequency response : 100Hz÷12 kHz Sensitivity: (OdB-1V/micro bar,1000 Hz) -75dB±3dB Output impedance :500ohm etc., complete.
1
-
-
... More
Supplying, installing, testing and commissioning of 8-zone call station with keyboard and all accessories etc., complete.
1
-
-
... More
Providing & Fixing of duly wired Equipment Rack to accommodate all above mentioned control equipment like console, amplifier, DVD player etc., complete.
1
-
-
... More
Supplying, installing and commissioning of Carbon-di- oxide type fire extinguisher of 4.5 kgs. Capacity, CO2 gas as per IS 15222 with controll discharge mechanism fitted with Hose & Horn applicable on Class B fire rating 21B confirming to IS: 15683 etc., complete.
38
-
-
... More
Supplying, installing and commissioning of Mechanical Foam type fire extinguisher 9Lts. Capacity, stored pressure type controllable discharge mechanism. confirming to IS: 15683 etc., complete.
1
-
-
... More
Supplying, installing and commissioning of ABC powder type fire extinguisher of 6 Kgs. Capacity, with initial filling (Mono Ammonium Phospate Powder 90) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle , confirming to IS:15683. (ABC Dry Chemical Powder- MAP 90%) etc., complete.
53
-
-
... More
Supplying, installing and commissioning of Mechanical Foam 50 ltr capacity Fire Extinguisher Powder Coated MS Body , Upright Type With Brass Forged Cap, 3 Mtr. Hose with ABS Foam making Nozzle, 300 gms CO2 Cartridges, 3 Ltrs AFFF 6% Liquid, Mounted on Trolley wheels complete with all accessories as Per IS:13386. The extinguisher should carry ISI mark etc., complete.
1
-
-
... More
Supplying, installing and commissioning of ABC Dry chemical powder type fire extinguisher of 25 Kgs. Capacity, trolley mounted type with initial filling (Mono Ammonium Phospate Powder 90) in brand new cylinder with powder coated finish, Stored Pressur type, Pressure Gauge, Controllable discharge mechanism with Hose & Nozzle , confirming to IS:10658. The extinguisher shall be ISI marked etc., complete.
1
-
-
... More
Supplying, installing and commissioning of Fire buckets round bottom type enamel painted, white inside & Red out side and Letter "FIRE" in black out side and handle with mounting bracket etc., complte.
12
-
-
... More
Supplying, installing and commissioning of Fire bucket stand fabricated by MS angles to install 4 Nos. of buckets etc., complete.
3
-
-
... More
Providing and installing in position the following type of photoluminiscent safety sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Signages with printed "IN CASE OF FIRE, USE STAIRS UNLESS INSTRUCTED OTHERWISE" of 1.5cm height letters in red with white back ground. The size of the board shall be 25cm * 30cm and shall be fixed at the height of 2mts, from finished floor near Manual Call Points etc., complete.
3
-
-
... More
Providing and installing in position the following type of photoluminiscent safety sign boards made out of 3mm thick "Opaque" PVC foam board with computer cut. PVC non-reflective self adhesive vinyle painted foam board, complete with mirror fasteners. Floor indentification signage (i.e, GROUND FLOOR… ETC.,) at each stair enclosure on every floor, indicating the floor number in words, lettering size shall be 7.5cm with contrasting colour from back ground. Size shall be 15cm * 60cm etc., complete.
5
-
-
... More
Providing and fixing in position the signage of " Incase of fire do not use Lift Size 8" x 8" etc., complete.
3
-
-
... More
Providing and fixing in position the signage of " Fire Extinguisher " to be pasted immediately above the every extinguisher. Size 4" x 4" etc., complete.
94
-
-
... More
Providing and fixing in position the signage of " Fire Hydrant & Hose Reel " to be pasted on door of the every fire shaft at all floors. . Size 6" x 8" etc., complete.
8
-
-
... More
Providing and fixing in position the signage of " Manual Call Point " to be pasted on door of the every fire shaft at all floors. . Size 6" x 8" etc., complete.
16
-
-
... More
Providing and fixing in position the sign board of " ASSEMBLY POINT " complete with 1 mm thick rigid plastic board size of 600 mm x 600 mm to be fixed on ground by using a steel rod / pipe at designated etc., complete.
1
-
-
... More
Providing and fixing in position the signage of " Fire alarm Panel " Size 6" x 8" etc., complete.
1
-
-
... More
Providing and fixing in position the signages "FIRE ORDER" it should contain the following matter on 3mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of 3' * 4' etc., complete.
1
-
-
... More
Earth work excavation in all kinds of soilby mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m etc., complete
50
-
-
... More
Supply and installation of RCC hume pipes of 450 mm dia & NP 2 Class with collars for road / below floor crossing of Fire water pipes etc., complete.
40
-
-
... More
Supply and construction of PCC (1:2:4) pedastals / supports for above ground pipes.the size of the pedestal shall be 300mm x 300mm x 300mm. Quoted rate shall inclusive of excavation ( if required ), chipping / chasing, shuttering, plastering (if required) etc. complete. at terrace level etc., Complete.
1
-
-
... More
SCHEDULE-E-OPERATION AND MAITANANCE : Sorting and Grading-First Year -Electrical/Electronics
8
-
-
... More
Sorting and Grading -Technician
24
-
-
... More
IQF Line (6Month/Year) Technician: Depodder Section
6
-
-
... More
IQF Line (6Month/Year) Technician: Process Line
6
-
-
... More
IQF Line (6Month/Year) Technician:IQF
6
-
-
... More
IQF Line (6Month/Year) Technician:Packing
6
-
-
... More
Electrical/Electronics/Mechanical Utility Engineer
6
-
-
... More
Pre - Cooler in Khara Pathar (6Month/Year)-Technician
6
-
-
... More
Operation Cost for CA Storage : Engineer
12
-
-
... More
Operation Cost for CA Storage: Technician
12
-
-
... More
Sorting and Grading: Second Year -Electrical/Electronics
8
-
-
... More
Sorting and Grading: Technician
24
-
-
... More
IQF Line (6Month/Year) Technician: Depodder Section
6
-
-
... More
IQF Line (6Month/Year) Technician: Process Line
6
-
-
... More
IQF Line (6Month/Year) Technician:IQF
6
-
-
... More
IQF Line (6Month/Year) Technician:Packing
6
-
-
... More
Electrical/Electronics/Mechanical Utility Engineer
6
-
-
... More
Pre - Cooler in Khara Pathar (6Month/Year)-Technician
6
-
-
... More
Operation Cost for CA Storage : Engineer
12
-
-
... More
Operation Cost for CA Storage: Technician
12
-
-
... More
Maintenance Cost: Refrigeration
1
-
-
... More
Maintenance Cost: Grading Line
1
-
-
... More
Maintenance Cost: IQF
1
-
-
... More
Sorting and Grading: Third Year -Electrical/Electronics
16
-
-
... More
Sorting and Grading: Technician
24
-
-
... More
IQF Line (6Month/Year) Technician: Depodder Section
6
-
-
... More
IQF Line (6Month/Year) Technician: Process Line
6
-
-
... More
IQF Line (6Month/Year) Technician:IQF
6
-
-
... More
IQF Line (6Month/Year) Technician:Packing
6
-
-
... More
Electrical/Electronics/Mechanical Utility Engineer
6
-
-
... More
Pre - Cooler in Khara Pathar (6Month/Year)-Technician
6
-
-
... More
Operation Cost for CA Storage : Engineer
12
-
-
... More
Operation Cost for CA Storage: Technician
12
-
-
... More
Maintenance Cost: Refrigeration
1
-
-
... More
Maintenance Cost: Grading Line
1
-
-
... More
Maintenance Cost: IQF
1
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements