Uttar Haryana Bijli Vitran Nigam Limited Tender

XEN Table OVERALL TABLE SIZE : 1800mm(W) X 1000mm(D) X 740mm(H),Side Storage Unit 1800mm(W) x 510mm(D) x625mm(H) & Hanging Pedestal Drawing Unit 455mm(W)x 685mm(D) x485mm(H) Providing and installing Office table unit with overall size 1800mm(W) x 1000mm(D) x 740mm(H), Side Storage Unit: 1800mm(W) x 510mm(D) x 625mm(H) , Metal Keyboard Tray 19", Metal CPU Trolley & Hanging Pedestal Drawing Unit (Size: 455mm(W) x 685mm(D) x 485mm(H) All Dim in MM with open tolerance of +/- 10mm MAIN TABLE:- Size 1800mm(W) x 1000mm(D) x 740mm(H) MAIN TABLE with table top size of 1800mm(W) x 1000mm(D) x 740mm(H) shall be made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top shall be with 43 mm thk boards with 2mm PVC edge banding with enhanced scratch resistance.The table top shall be supported on 75mm Peg mounted over side storage unit and fixed pedestal. The end wall of the table on the side shall be topped by gable end. The gable end shall be made up of 43mm thick Pre-laminated particle board and profile shall be in linear shape with appropriate PVC edge banding. The table shall be clad with 18mm thick modesty panel which provide structural support for the table. It shall be 18mm thick Pre-laminated particle board in linear shape with appropriate PVC edge banding connected with both end. Separate provision for mounting switches on the side table adjoining the tables shall be provided. Wire routing / wire management groumets covered with PVC wire manager shall be provided on main or side table. SIDE STORAGE UNIT 1800mm(w) x 510mm(D) x 625mm(H) :The table shall have side unit for storage purpose with an overall size 1800mm X 510mm X 625mm. The side unit shall be made up of Pre-laminated particle board of grade II of IS 12823 with top and side 43mm thick and drawer base 9mm thick & other parts 18mm thick like shutter, back, facia, etc. It shall have 3 drawer and 2 sliding shutter. The drawer shall be operated with SS handle and easily close & open with the assistance of roller channel and ball bearing channel to enable smooth operation. The drawer shall have central locking mechanism in which all the drawer shall be synchronized locked with one single key. To protect the wall from kicks, abrasion and serve as a decorative moulding, skirting shall be provided at bottom. PEDESTRAL DRAWER UNIT:- 455mm(W) x 685mm(D) x 485mm(H) A hanging pedestal shall be provided with an overall size 455mm X 685mm X 485mm. The pedestal shall be made up of Pre- laminated particle board of grade II of IS 12823. Pedestal side, back, facia shall be 18mm thick & drawer base shall be 9mm thick. The pedestal shall have 2 nos. of drawer. The drawer shall be operated with SS handle and easily close & open with the assistance of sliding channels to enable operation. The drawer shall have central locking mechanism in which all the drawer shall be locked with one single key. The manufacturer shall have quality and safety assurance like NABCB approved ISO- 9001:2015, NABCB approved ISO-14001:2015, NABCB approved ISO-45001:2018, NABCB approved ISO-50001-2018, BIFMA Level 3 compliance, ISO-27001:2007 and IGBC certifications .

SDO MAIN TABLE: 1500mm(W) X 900mm(D) X 740mm(H), Metal Keyboard Tray 19", Metal CPU Trolley, Extended Return Unit 1050mm(W) x 450mm(D) x740mm(H), Back Storage Unit 750mm(W) x 415mm(D) x 740mm(H), & Pedestal Drawing Unit400mm(W)x 470mm(D) x545mm(H) Providing and installing Office table unit 1800mm(W) x 900mm(D) x 740mm(H), Extended Return Unit: 1050mm(W) x 450mm(D) x 740mm(H), Metal Keyboard Tray 19", Metal CPU Trolley, Back Storage Unit(Size:- 750mm(W) x 425mm(D) x740mm(H), & Pedestal Drawing Unit (Size: 400mm(W) x 470mm(D) x545mm(H) All Dim in MM with open tolerance of +/- 10mm EXTENDED RETURN UNIT 1050mm(w) x 450mm(D) x 740mm(H) : The Extended return table of size 1050x450x700mm shall be completely made up of Prelam particle board conforming to IS : 12823 Interior Grade with PVC edge banding. Top shall be in 25mm thk baord with 2mm PVC edge banding supported on 25mm thk. Gable ends and 18mm thk. Modesty panel. Exposed edges shall be in 2mm thk PVC edge banding & sealed edges shall be in 0.8mm thk PVC edge banding. BACK STORAGE UNIT: - 900mm(W) x 425mm(D) x 740mm(H) Storage Unit : Storage body shall be made of 18mm thick pre laminated partical Board conforming to IS : 12823 Interior Grade, The back of the unit shall be made from 9mm prelaminated board. All the exposed edges shall be with 2mm PVC egde Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. The top, side and hinged shutters shall be sealed with 2mm thick PVC edge banding. The units shall be assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges shall be from Hettich/Ebco. PVC edge banding shall be from Rehau or Dolken of Germany PEDESTRAL DRAWER UNIT:- 400mm(W) x 470mm(D) x 545mm(H) The Pedestal Unit of Dimensions 400mm(W) x 470mm(D) x 545mm(H) shall be made of 18mm thick pre laminated partical Board conforming to IS: 12823 Interior Grade. All the exposed edges shall be sealed with 2mm thick PVC Imported edge banding on sides and bottom of make Dolken or Rehau of Germany with matching grains as on Laminate. The top and drawer facia shall be sealed with 2mm thick PVC edge. The drawer unit shall consists of 1 box drawer and 1 file drawer. The sides of Inside drawer box shall be of prelam particle board. The drawer box shall be fitted with roller Slide for free movement. The drawer unit shall be provided with central locking system, where in the two drawer are locked with one key. PVC recessed handles shall be provided for easy opening and closing of drawer. The drawer unit shall be fitted on castors for easy mobility. PVC edge banding shall be from Rehau or Dolken of Germany with matching grains as on laminate. The complete furniture unit shall be factory assembled with knock down fittings. The pedestal shall be fitted with additional (5th) castor to avoid topplig of pedestal in case of opening of any / all of the 2 drawers. METAL KEYBOARD TRAY:- 0.8mm thick 19"

ACCTT. STENO, HDM, HEAD CLERK , JEs ,CA & CC their staff Table Main Table:- Providing and placing executive table with return unit, Overall size of table is 1200mm x 750mm x750 mm .The construction of the main table shall be free standing structure . Table shall be in rectangular shape . Table :-- Table top is made up of 25mm thick pre laminated particle board of grade IS 12823 interior grade . The profile of table top shall be in rectangular shape .The exposed sides shall be duly edge banded with 2mm thick PVC make of dolken / rehau with top and bottom of the edge banding duly rounded by automatic CNC machine. Modesty :-Modesty panel & Gable end is made up of 18mm thick pre laminated particle board of grade IS 12823 with 2mm thick pvc edge banding make of dolken / rehau . The end wall of the table on the side shall be topped by gable end. There shall be buffers provided at the bottom to avoid the scratches on the floor. Extended Return Unit :- Return unit shall be made up of 18 mm thick prelam particle board with size of 900mm x 450mm x 700mm . The return unit top, side panel & front panel made up of 18 mm thick Pedestal :-The size of Pedestal unit W400mm x D450mm x H680mm .It should be made up of 18mm thk. Prelam particle board conforming to IS : 12823 Interior Grade . The pedestal shall have 3 Drawer ( 2 Drawer + 1 Filing ) with roller slide mechanism for 2 Drawers and Ball bearing slide for 1 Fillng Unit . The Pedestal shall have central lock mechanism with single key .The exposed sides shall be duly edge banded with 2mm thick PVC make of dolken / rehau with top and bottom of the edge banding duly rounded by automatic CNC machine. There shall be buffers provided at the bottom to avoid the scratches on the floor.