Translational Health Science And Technology Institute Tender

Providing, fabrication and fixing in position Laboratory Working Table of below mentioned following sizes consisting of one drawer & one shutter on right side, Unit shall be made of 18 mm thick BWP board on top, bottom, sides, partitions, shelves, shutters and 12 mm thick BWP ply in drawer units. Supporting frame shall be made of 14 swg thick 1”x1” MS square pipe fabricated in rectangle shape on top, one bracing all-around in bottom and four legs with height adjuster. Exposed exterior surface of Board (except granite stone top) shall be finished with 1 mm thick laminate and interior surface with 0.8 mm thick laminate, edges with 4 mm thick melamine polished teak wood margin / PVC liping and MS square pipe shall be finished with synthetic enamel paint over a coat of primer. Not less than 16 mm thick polished z-black granite stone of adequate size shall be fixed on top with suitable adhesives including edge grinding chamfering & polishing including suitable locking arrangement, screws, fasteners, hinges, adhesives, telescopic drawer channels, magnetic catchers, handles/ knobs and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge. Size of table: 48'x32"x36"

Providing, fabrication and fixing in position Two Shelves Regent Rack (Hutch) with Frame of required size (to be common and properly fixed with lab tables). Supporting frame shall be made of 14 swg thick 1”x1” MS square pipe, wooden raceway made of 18mm thick BWP board to accommodate 4 nos. of switches/ sockets. Exposed surface of board/ ply shall be finished with 1 mm thick laminate, edges with 4 mm thick melamine polished teak wood margin / PVC Lipping and MS square pipe shall be finished with synthetic enamel paint over a coat of primer. Not less than 16 mm thick polished z-black granite stone of adequate size shall be fixed on top of one shelves with suitable adhesives including edge grinding chamfering & polishing. Unit shall include screws, fasteners, adhesives and all other necessary fitting/ fixing arrangement etc. complete as per design, drawing and as directed by the Engineer-In-Charge. Size of reagent rack: 48"x18"x30"

Providing and fixing 600mm deep over head storage cabinet of required size on top of regent rack, both side openable made of 18mm thick BWP board of approved make on top, bottom, sides, partitions, shutters (both side) and 12mm thick BWP ply of approved make at shelves (middle of cabinets) as per drawing.1.0mm thick laminate of approved make and shade on shutters & exposed sides of cabinets wherever required and 0.8mm thick laminets shal be fixed on all unexposed inner faces of cabintes including wooden / PVC lipping, suitable locking arrangement all type of screw fastners hinges/piano hinges, wooden screw adhesive polysing /painting iof lipping , magnetic catchers towerbolts door handles/knobs and all other type of necessary fittings etc. complete as per design drawinngs and site condition as directed by engineer in-charge. Size of Storage: 48"x24"x30"