Rajya Krishi Utpadan Mandi Parishad Tender

Supply and laying of 25 mm x 3 mm G.I. strip from earth electrode directly in the ground as required complete in all respects.

Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel painted with anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect.

Supply and laying of aluminum conductor, PVC insulated armored served sheathed cable 1100 volts grade at a depth of 750 mm below ground level over a cushion of 75 mm thick snd all round and protected with burnt brick on sides and on top. On surface, the cable run shall be fixed on M.S. clamps etc. of suitable sizes or as directed by the E/I complete in all respect. The armoring of the cable shall be properly connected with the earth conductor by clamps etc. (a) 16 Sq mm 4 Core

Supply and fixing of palm or pin type copper tin plated cable socket (lug) to the cable leads insulated with tap and making connection etc. complete in all respect as per direction of E / I. (a) 16 Sq mm

Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect. Cat.AAA

Supply and Errection of factory fabricated and wired metal clade dust and vermin proof mounting panel TPN switch board complete with the following HRCX type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ampere meter, voltmeter, selector switches for ampere meter and voltmeter, fuses current transformer etc. The board shall have suitable capacity electrolytic insulated with heat shrink sleevings and mounted on non hygroscopic supports such as CMC / DMC supports with detachable side cover and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, revers entry in case of pedestal type, cable socket, compression glands and indicating lamp on incoming etc. Thejob includes the grouting of the board asper direction of Engineer in charge. All out going switches of 100 amp. And above will be provided with ampere meter, current transformers and selector switches etc. and instrument fuses. The switch board shall be fabricated with CRCA sheet with a minimum thickness 1.60mm/2.00mm cubical type switch board shall be cat. A,B, B-11 and pedestal type for cat. C only. Incoming 200Amp. TPN- 1 No. Outgoing- 63 Amp. TPN – 3 Nos. (ii) Cat B Cubical Type