Public Works Department Tender

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil, Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Idli Steamer: Stainless steel body Idli steamer 304 Cap: 108 Idli Per Batch. Time- 15 Minutes. Made of 18 gauge 304 Stainless Steel. Burner: RV Burner Idli size: 3 diameter Trays size : 12`x12`. Approx. Size-900mm L X 600mm W X 1200mm H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Dosa Plate With Stand: Top - 16 mm MS Plate Body: 16 SWG Stainless Steel Sheet Cladding with MS angle Frame Burner: 4 RV burner with center coupling, NC valve, and copper pipe with pilot lamp Shelves: (1) One Nos 18 SWG Stainless Steel Legs: (4) Four Nos 16 SWG Stainless Steel Square Pipes Bush: (4) Four Nos Adjustable Square Nylon Bush. Overall Size-1200mm L X 600mm W X 850mm H.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge.Chapati Puffer:Top Grilled puffer covered with 16 SWG Polished SS 304, Front and sides Turned Down 50mm and In 12mm, Sound Deadned with coved corners, rear raised splash 150MM returned 25mm down . Angle frame : 30X30X3 mm SS 304. Control Panel : 18 Swg SS 304. Spillage trays : 20 swg SS 304 tray in 2 equal sections. Undershelves : 18 Swg SS 304 undershelf. Gas inlet at Both sides. 100mm rear body/legs setback for gas pipe routing Legs : 4 nos. legs 1-1/2``X 1-1/2``X16 swg SS 304 square with adustable nylon Bullet Feet. Approx. Size- 600mm L X 600mm W X 850mm H. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Two Burner Indian Range: Top and Splash 1.5mm Thick Ss 304 Grade With Matt Finish , Sides : 1.0 Mm Thick Ss 304 Grade With Mirror Finish, Leg: 1.5” and1” Ss Square 304 Grade With Mirror Finish And Adjustable Bullet Leg. The gas Burner shall be of T-35 high pressure Burner with heavy duty Iron Casting square panspot. Overall Size- 1200mm L x 600mm W x 450mm H.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge.Bratt Pan: For bulk cooking with the following specifications: Fuel mode : PNG, LPG gas,Cooking functions : Braising, boiling, Steaming, Poaching, Stewing, roasting, deep fat frying and Shallow frying,Molded working top made of AISI 304 with 2mm thickness and rounded corner for easy cleaning, Tilting machanism for the cooking pan,Maximum design temperature : 300 deg C,Reduces energy consumption by utilizing self created steam pressure for cooking, Uniform boiling to goods,Stainless steel self-balanced cover with Heavy-duty handle, Thermosate to regulate the temperature between 90° C and 300° C. RV BURNER 2 Nos (90000 Btu/Hr). Gas consumption - less than 2 kg per hour Height-adjustable stainless steel legs. Approx. Size-1000mm L x 900mm W x 1000mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Rice Boiler: Tank Body 12 swg S.S 304 ROUND SHEET DOUBLE COVERED Tank Bottom : 10 mm thickness Burner : 1 nos HP Burner 70,000 BTU/HR, with Individual pilots and control valve. NCV walls for regulating Gas Water tap included (plumbing is at yor scope) Tank lid Spring Loaded Surface Finish Mat Polish Buffing Capacity- 120 Ltr. Approx. Size-1000mm L X 900mm W X 1000mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Milk Boiler: Made of SS 16 swg 304 Grade with well insulated with cotton wool all around.Tank Bottom : 10 mm thickness Burner : 1 nos HP Burner 70,000 BTU/HR, with Individual pilots and control valve. NCV walls for regulating Gas Provided with on off switch . INSULATION SUITABLY INSULATED WITH 65 MM THICK HIGH QUALITY MINERAL GLASS WOAL. Capacity:100LTRS Overall Size :900mm L X 900mm W X 900mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge Single Sink With Stand: Top made of 16 SWG Stainless Steel 304 Grade 25 MM Deep with 150 MM Back slash With one Nos Full Sink of size 400x400x 250 mm deep With Stainless Steel 40 mm Dia Sink Waste Coupling Body: Front apron 18 SWG Stainless Steel. LEGS: (4)FourNos 18 SWG Stainless Steel Square Pipes Bush: Adjustable Square Nylon Bush (4) Nos. Overall Size:600mm L X 600mm W X 600mm H. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Single Burner Range: Made of Top and Splash 1.5mm Thick Ss 304 Grade With Matt Finish, Sides : 1.0 Mm Thick Ss 304 Grade With Mirror Finish, Leg: 1.5” and1” Ss Square 304 Grade With Mirror Finish And Adjustable Bullet Leg. The gas Burner shall be of T-35 high pressure Burner with heavy duty Iron Casting square panspot. Overall Size- 600mm L x 600mm W x 600mm H.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Masala Trolley: Top of trolley- 1.5mm Thick Ss 304 Grade With Matt Finish, Leg: 1.5” Ss 304 Grade With Mirror Finish And Movable Wheel, There shall be 1/6 GN Pan-6 Nos of required depth with proper individual lead in all 6 pans. Overall Size-900mm L X 600mm W X 850mm H. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Exhaust Hood: MADE OF 18 SWG. 304 GRADE S.S. SHEET, FILTER: FRAME OF 18 SWG.STAINLESS Steel BAFFLE TYPE GREASE FILTER. AIR FLOW 8000 CFM. Overall Size- 3300mm L X 1800mm W X 500mm H .

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Four Door Referigerator: The Outer Body Fabricated from 21SWG AISI 304 grade Stainless Steel Sheet. The Inner Lining and Shelves ( Two nos in each compartment) Fabricated in 22SWG AISI 304 grade Stainless Steel Sheet. Each Compartment provided with 2 adjustable shelves. UPRIGHTS in 50 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe fitted with White Nylon Bullet Leg with 25mm ht. adjustment. Total height 100mm from bottom of Unit. INTERNAL FRAMEWORK in 25X25X4mm thick MS angles. INSULATION 75mm thk. Polyurethane Foam, COMPRESSOR of suitable Capacity of Standard make like `Emmerson` or Equivalent. Other Accessories Like Copper Tubing, Circulation Fan, etc. of Standard Quality. Coolant Gas of type. Doors Fabricated from 19SWG AISI 304 grade Stainless Steel Sheet. fitted on Pivotal Hinges with built in Handles and Lock, Door Sealing lining in High Quality Isoprene Rubber. WELDING: should be done by Argon Arc /Tig welding only. No Electrical Arc Welding should be used. All the welded edges, surfaces should be properly and smoothly ground and finished to remove any burr or sharp edges. Capacity-600 Ltrs. Overall Size- 1200mm L x 750mm W x 2100mm H. Temperature Range plus 2°c to plus 8 °c.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS Wall Cabinet: Made of 304 Quality, Shelves will be made of 304 Quality Grade, 18 Swg. Stainless steel hinged doors wherever mentioned not exceeding 400 mm length. Doors shall be provided with pad lock facility. Doors reinforced with 16swg hat channel. The construction shall be reinforced beeded panels and shall be flexible with anchor fastners on wall, No. of Shelf- 4. Overall Size- 1500mm L x 450mm W x 300mm H.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Pot Rack: Made of Outer Frame 1.5`` SS square Pipe 304 Grade With Mirror Finish, Inner Support 25mm Dia Pipe 304 Grade With Mirror Finish, Leg : 1.5” Ss 304 Grade Pipe With Adjustable Bullet Leg, No. of shelves 3. Overall Size-900mm L X 600mm W X 1650mm H. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Staff Locker: HAMMERTONE FINISH GRAY COLOUR, 18 Guage MILD STEEL, No. of Lockers- 12. EACH LOCKER WITH PAD LOCK FACILITY, Overall Size- 900mm L X 450mm W X 1800mm H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS Cabinet: Made of 304 Quality, Shelves will be made of 304 Quality Grade, 18 Swg. Stainless steel hinged doors wherever mentioned not exceeding 400 mm length. Doors shall be provided with pad lock facility. Doors reinforced with 16 swg channel. The construction shall be reinforced beeded panels and shall be flexible with anchor fastners on wall, No. of Shelf - 4. Overall Size- 900mm L X 450mm W X 1800mm H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Dinning Table For Staff: Top to be Fabricated from 16SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. UNDERSHELVES: 1 in No. to be Fabricated from 18SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. Welded at 150mm from Bottom of Unit, directly to Uprights. UPRIGHTS in 38 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe fitted with White Nylon Bullet Leg with 25mm ht. adjustment. INTERNAL FRAMEWORK in 25X25X3mm thick Stainless Steel AISI 202 Grade Angle below the Top. WELDING: should be done by Argon Arc /Tig welding only. No Electrical Arc Welding should be used. All the welded edges, surfaces should be properly and smoothly ground and finished to remove any burr or sharp edges. FINISH: All plain and pipe surfaces should be finished brush / satin finish. Overall Size-1500mm L X 700mm W X 750mm H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS Stool: Top to be Fabricated from 16SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. UNDERSHELVES: 1 in No. to be Fabricated from 18SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. Welded at 150mm from Bottom of Unit, directly to Uprights. UPRIGHTS in 38 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe fitted with White Nylon Bullet Leg with 25mm ht. adjustment. INTERNAL FRAMEWORK in 25X25X3mm thick Stainless Steel AISI 202 Grade Angle below the Top. WELDING: should be done by Argon Arc /Tig welding only. No Electrical Arc Welding should be used. All the welded edges, surfaces should be properly and smoothly ground and finished to remove any burr or sharp edges. FINISH: All plain and pipe surfaces should be finished brush / satin finish. Overall Size-1300mm L X 250mm W X 500mm H.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Potato Peeler: Peeling Chamber in Stainless Steel 16 SWG AISI 304 Grade Sheet. Top Lid in Stainless Steel 18SWG AISI 304 Grade Sheet. Bottom and Inside of Chamber Impregnated with Coarse Emery Powder Unit Mounted on 40x40x16SWG AISI 304 Grade Square Pipe Frame. Water Inlet at the top of Chamber and Water Flow Out and removal Window at the bottom of the Chamber. Branded Single Phase Electrical Motor of one H.P. Capacity-60-70 Kg/Hour, Product To Be Peeled-Potato, Grade-Automatic, `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Pulveriser: Pulverizing Chamber, Blades, Hopper and body in AISI 304 Grade Stainless Steel, Unit Monted on Stainless Steel AISI 304 Grade 40x40x16SWG Grade Pipe Uprights and Frame, Two Sets of Six nos. different mesh size sieves supplied with unit. Branded Single Phase Electrical Motor of 3 Hp, Machine Capacity-50 - 60 kg/hr, Speed-2800-3500 RPM, Mesh Size-100-300 mm, Cyclone Collector: Made for excellent and efficient separation,

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Wet Grainder: Grinding bowl in 19SWG AISI 304 Grade Stainless Steel with White Stone Base, Grinding Pestle in White Stone with properly embeded Wooden Stump Scrapper inside Bowl in High Quality White Nylon Sheet 20mm thk. fitted to Stainless Steel AISI 304 Grade Pipe with vertical and Lateral movement arrangement. Stand, Post and Supports of Pestle, Scrapper, etc. in Stainless Steel AISI 304 Grade Pipe. Unit Mounted on Stainless Steel AISI 304 Grade 35x35x3mm thk 304 Grade Angle Frame cladded with 18SWG AISI 304 Grade Sheet from all sides and top. Coconut Srapper with proper cover (when not in Use) to be provided as an additional feature. Branded Single Phase Electrical Motor of One H.P. Hand Tilting, Utility : Rice, Pulses, Masalas, Dal etc., Capacity- 10 Ltrs.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Planetary Mixer: Body-MS, Bowl-SS 304, Bowl/top cover:SS 304, Need Patti/Spiral-SS304, Double speed(fast/slow)Motor RPM-1440,rpm speed:960 Capacity-60 Ltrs. Power Consumption 3.7 Kw. 440 V.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. VEGETABLE WASHER: Made from 304 AISI stainless steel. Work area in non-toxic material. Double inclined well bottom to allow automatic cleaning. Perforated stainless steel base filter easily removable: overflow and filter in 304 AISI stainless steel. Height-adjustable feet. Washing system by water vortex: automatic water filling. Well capacity: 200 lt. Load per cycle: 8 kg (light vegetables): 30 kg (heavy vegetables). Cycle duration: 2-3 min. Electric: 1.1 kW, `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Vegetable Cutting Machine: Table Top Veg Cutting Machine for the output capacity of 150kg per hour with the following technical Specifications: Structure : Strong Vegetable Cutting Machine: Stainless steel structure, Electric operation with Overload control high power fan professional motor,Voltage / Frequency : Single phase: 230 V, 50 Hz, Power : 0.5 HP,Motor RPM : 300,Start stop switch with 24V NVR - Micro switch cover and handle,Belt Transmission, Blade dia : 200 plus 5 mmFeeder : Single hopper and double hopper Preparation Blade Disc : 2 sets of slicing disc , Julienne Disc , Cubes Disc, Grating disc, Soft Cut Disc , Chips Cut Disc, shredding Suitable for vegetables, bread, cheese,

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Wall Shelf: Made of 304 grade Stainless Steel 20 swg sheet with necessary stainless steel wall bracket and base support made of SS Angle, Overall Size- 1200mm L x 300mm W.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. CHOPPING BOARD WITH STAND:Top to be Fabricated from 16SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. UNDERSHELVES: 1 in No. to be Fabricated from 18SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm Plastic chopping board of size 18x12x2 inch to be fixed in top. Welded at 150mm from Bottom of Unit, directly to Uprights. UPRIGHTS in 38 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe fitted with White Nylon Bullet Leg with 25mm ht. adjustment. INTERNAL FRAMEWORK in 25X25X3mm thick Stainless Steel AISI 202 Grade Angle below the Top. WELDING: should be done by Argon Arc /Tig welding only. No Electrical Arc Welding should be used. All the welded edges, surfaces should be properly and smoothly ground and finished to remove any burr or sharp edges. Overall Size-6000mm L X 675mm W X 850mm H plus 150.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Onion Bin: Made: Made of stainless steel (304) WIRE MESS, Stainless Steel 3 mm wire mesh 25mm x 25mm size square, 16 Swg. Stainless Steel notched to keep free flow of Potato in front. Sides and Lids : Stainless Steel 3 mm wire mesh 25mm x 25mm size square, welded in 12 Swg Stainless Steel 25mm x 25mm flat channels. Front/Sides and Lids- Stainless Steel 3mm wire mesh 25mm x 25mm size square , welded in 12 Swg Stainless Steel 25mm x 25mm flat channels with liftable door at the bottom for first in first out issue. CASTORS-100mm dia. Rubberized castors, plate fitted castors wheel. Overall Size- 600mm L X 600mm W X 900mm H. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Potato Bin:Made: Made of stainless steel (304) WIRE MESS, Stainless Steel 3 mm wire mesh 25mm x 25mm size square, 16 Swg. Stainless Steel notched to keep free flow of Potato in front. Sides and Lids : Stainless Steel 3 mm wire mesh 25mm x 25mm size square, welded in 12 Swg Stainless Steel 25mm x 25mm flat channels. Front/Sides and Lids- Stainless Steel 3mm wire mesh 25mm x 25mm size square , welded in 12 Swg Stainless Steel 25mm x 25mm flat channels with liftable door at the bottom for first in first out issue. CASTORS-100mm dia. Rubberized castors, plate fitted castors wheel. Overall Size- 600mm L X 600mm W X 900mm H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Dish Landing Table: TOPS: Made of 16 Swg. 304 Quality, 18/8 Grade Stainless Steel duly 120 grit matt polished with all edges rounded with no bur or other excess material left. Top will be turned down 50mm and 12mm underneath in channel shape on all exposed sides, in case of sunk in top wherever mentioned the side shall be raised by 20mm an all exposed sides, Where tables are placed against building wall they will be turned up at back approximately 100mm returned 20mm at 45 degree to wall with all exposed ends Closed, argon arc welded and smooth polish. UNDERSIDES: Undersides of all Stainless Steel Tops for table Counter, Sink, Dish and Pot Tables will be Mounted on 30mm x 30mm x 16 Swg. 304 Quality S.S Square Pipes with cross supports at maximum of 750mm span, duly secured by welding. The undersides will be suitably sound deadened by treating with a coat of aluminum carboxide rubberized pain, finished with silver paint. UNDERSHELVES: Undershelves wherever called for will be constructed of 304 Quality 18/8 Grade,18 Swg. Stainless Steel Sheeting uniformly matt polished with 120 grit and reinforced with 30mm x 30mm x 16 swg. St. steel square pipe Frame. All shelves will be turned down 38mm and 12mm underneath on all sides with resulting corners cutout to fit contour of legs. Shelves for hot case will be perforated. Overall Size- 1200mm L X 675mm W X 850mm H plus 150.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical,plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Three Sink Unit: TOP- 16 SWG Stainless Steel 304 Grade 25 MM Deep with 150 MM Back slash With (3) three Nos. Full Sink 300 mm deep With Stainless Steel 40 mm Dia Sink Waste Coupling Body: Front apron 18 SWG Stainless Steel. LEGS: (4)FourNos 18 SWG Stainless Steel Square Pipes Bush: Adjustable Square Nylon Bush (4) Nos, Overall Size- 1800mm W X 675mm W X 850mm H plus 150.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Loading table: Top to be Fabricated from 16SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. UNDERSHELVES: 1 in No. to be Fabricated from 18SWG Stainless Steel AISI 304 Grade Sheet, All sides to be turned down 38 mm and in 12 mm. Welded at 150mm from Bottom of Unit, directly to Uprights. UPRIGHTS in 38 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe fitted with White Nylon Bullet Leg with 25mm ht. adjustment. INTERNAL FRAMEWORK in 25X25X3mm thick Stainless Steel AISI 202 Grade Angle below the Top. WELDING: should be done by Argon Arc /Tig welding only. No Electrical Arc Welding should be used. All the welded edges, surfaces should be properly and smoothly ground and finished to remove any burr or sharp edges. FINISH: All plain and pipe surfaces should be finished brush / satin finish. Overall Size-600mm L X 675mm W X 850mm H plus 150.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Conveyor Type Dish Washer with Dryer: Supply of reputed make Conveyor type dishwasher with dryer having the following specifications: Washing capacity - 80-100 Basket per hour Size : 1800 x 770mm x1600 Functions : Washing, rinsing and drying dishes, crockery’s, cutlery Structure - Stainless steel 18/10 AISI 304. Double boiler system, Double skinned balanced door, Boiler and tank Temperature control setting with digital thermo control, Stainless steel upper and lower wash and rinse arms, Wash tank shall have rounded edges and inclination, to ensure complete drainage of dirty water, Double stainless steel surface filters, Ergonomic control panel, Each Built-in W.A.G.P. system ensures excellent rinsing and prevents dirty water from flowing back to the main water system,Shall have Drying tunnel, Entry and exit tables, rinse dispenser, detergent dispenser,Three or more racks for plates and a rack for tableware.Complete sterilization between the temperature 55 to 85 degIPX5 Protection, Adjustable thermostat,Non-return valve and safety switch,Washing pump - 700 or more litres per hour, Less water consumption, Display for calculate detergent based on dishes qty, Built in dosing pump, Disinfect dirt and bacteria Less power consumption, Power : Three phase, 415 V, 50 Hz Double stainless steel surface filters, Ergonomic control panel, Waste collection tank made of SS304 with roller , Overall Size- 3600MM L X 750mm W X 1500MM H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Unloading Table: Top - 16 SWG Polished SS 304 . Round Pipe 1-1/2`X 1-1/2` S.S. 304 Castors : 4 Nos. 100 mm dia x 50mm thick heavy duty nylon Castor Wheels. Two Nos. with brakes, fixed to channel framework. Surface Finish Mat Polish Bufing, Overall Size- 600mm L X 600mm W X 850mm H plus 150.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS Rack: Made: Made of 304 Quality, Shelves will be made of 304 Quality 18/8 Grade, 18 Swg. Shelves: 5 Nos, 18 Swg. Stainless Steel. Upright of 30 mm stainless steel square pipe fitted with nylon bullet fit. Overall Size- 900mm L X 450mm W X 1800mm H.

` Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Pot Wash Rack: Made of Outer Frame 1” SS Square Pipe 304 Grade With Mirror Finish, Inner Support 19mm Dia Pipe 304 Grade With Mirror Finis Leg : 1.5” Ss 304 Grade Pipe With Adjustable Bullet Leg. No of shelves 3. Overall Size- 1800mm L X 600mm W X 1500mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Pre Rinse Shower: Made of 4`` Deck Mount Facuet `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil, Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Cutlery Counter: Top- 16 SWG Polished SS 304, All sides Turned Down 50mm and In 12mm, Sound Deadned with coved corners. Angle frame : 30X30X3 mm SS 304 Undershelves : 2 Nos 18 Swg SS 304 undersheleves. All sides Turned Down 40mm and In 12mm with 16 swg ss stiffner. Legs : 4 nos. mads of square pipe of 1.5 mm 16 swg SS 304 with nylon Bullet Feet Surface Finish Mat Polish Bufing, Overall Size- 1200 mm L X 675mm W X 850mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil, Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Bain Marie: Top- 1.5mm Thick Ss 304 Grade With Matt Finish , Tank : 1.2mm Thick Ss 304 Grade With Matt Finish, Three Side and Bottom Shelf : 1.0 Mm Thick Ss 304 Grade With Mirror Finish, Leg: 1.5” Ss Square Pipe 304 Grade With Mirror Finish And Adjustable Bullet Leg Vessel : GN Pan 5 no. of 1/1 - 150mm deep ( 21x13x6 inches) Electric Heater of 3kw Heater With Control Unit, 4 nos of Gn pan hot and one ambient temperature.Overall Size- 1800mm L X 675mm W X 850mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil, Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Plateform Trolley: Fabricated from 18SWG Stainless Steel AISI 304 Grade Sheet, all sides turned up by 50mm and then 12mm for chipping bend. PUSH CART HANDLE in 25 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe. UPRIGHTS in 38 mm dia.X 16SWG thick Stainless Steel AISI 304 grade pipe. CASTOR WHEELS: 2 Fixed and 2 Swiveling with Brake of 150mm dia x 30mm thick rubber tyres. WELDING: should be done by Argon Arc /Tig welding only. No Electrical Arc Welding should be used. All the welded edges, surfaces should be FINISH: All plain and pipe surfaces should be finished brush / satin finish, Overall Size- 750mm L X 600mm W X 850mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Dish Collection Trolley: Top should be 16 Gauge, SS 304 GRADE shelves should be made of 18 Guage SS sheet, 38x38x3mm SS angle frame supported, noise free rubber castors to be provided with wheels, Overall Size- 750mm L X 600mm W X 850mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Weingh Scale: Voltage230 V Accuracy5 G Features Red bright LED display. Rugged construction with stainless steel platform. Portable design, easy to carry. Foldable sturdy grill provided to support heavy loads. Inclined front panel for easy readability. Plateform size 600 mm LX 600 mm B. Capacity- 300Kg. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS Pallets: Top- 16 SWG Polished SS 304, Front and sides Turned Down 50mm and In 12mm, Sound Deadened with coved corners, Legs: 4 nos. legs 1-1/2``X 1-1/2``X16 swg SS 304 square with adjustable nylon Bullet Feet, Overall Size- 1050mm L x 900mm W x 250mm H. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Gas Bank 4 plus 4 Manifold: Made of Tata C class 1 inch Pipe along with flexiable pipe ISI mark and regulator for lpg pipe.

Supply , Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Exhaust Hood: MADE OF 18 SWG. 304 GRADE S.S. SHEET, FILTER: FRAME OF 18 SWG.STAINLESS Steel BAFFLE TYPE GREASE FILTER. AIR FLOW 6250 CFM. Overall Size- 4450mm L X 900mm W X 450mm H .

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Centrifugal Fresh Air Blower : Blower having Cfm capacity 16000 CFM capacity of 60 mm static pressure as required motor of 10 Hp capacity 960 RPM Suitable For Operation On 415 v AC SUpply. It Include MS stand, canvas connection, lovers, Electric connection with starter etc.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Centrifugal Fresh Air Blower : Blower having Cfm capacity 12500 CFM capacity of 60 mm static pressure as required motor of 7.5 Hp capacity 960 RPM Suitable For Operation On 415 v AC SUpply. It Include MS stand, canvas connection, lovers, Electric connection with starter etc.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Centrifugal Fresh Air Blower : Blower having Cfm capacity 10000 CFM capacity of 60 mm static pressure as required motor of 5 Hp capacity 960 RPM Suitable For Operation On 415 v AC SUpply. It Include MS stand, canvas connection, lovers, Electric connection with starter etc.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. CHAPATI PLATE CUM PUFFER:Top Grilled puffer covered with 16 SWG Polished SS 304, Front and sides Turned Down 50mm and In 12mm, Sound Deadned with coved corners, rear raised splash 150MM returned 25mm down . Angle frame : 30X30X3 mm SS 304. Control Panel : 18 Swg SS 304. Spillage trays : 20 swg SS 304 tray in 2 equal sections. Undershelves : 18 Swg SS 304 undershelf. Gas inlet at Both sides. 100mm rear body/legs setback for gas pipe routing Legs : 4 nos. legs 1-1/2``X 1-1/2``X16 swg SS 304 square with adustable nylon Bullet Feet. Approx. Size-1200mm L X 600mm W X 850mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Work Table with Sink: Top: 16swg SS sheet SS 304 Grade 12mm raised marine edges turned out 12mm @ 45 deg., Down 45mm and in 6mm turn on front and both sides. Vertical and Horizontal corners are covered. All bends to be rounded and smooth Backsplash: Rear - 150mm height, turned up 25mm at 60° towards the back and 12mm down at 90° with rounded junction for easy cleaning. Backsplash to be covered with 20swg thick SS sheet SS 304 Grade Sink: 16swg SS sheet SS 304 Grade sink duly welded with top. 38mm dia chrome-plated drain waste fitted on the centre of the sink. Sink size: 400mm (L)x 500mm (D) x 300mm (H) Framework: 40x40x 5mm thick ss angle, 304-grade ss. Rubber gasket to be inserted between ss sheet and ss framework for sound deadening Cross Bracing: 25 MM Square 16 swg SS pipe 304 GRADE `all sides cross bracing Uprights: 4 nos. 38mm square 16swg thick SS pipe 304 GRADE uprights. Rear uprights 75mm away (clear distance) from the wall. Bullet feet: Nylon adjustable bullet feet. Overall Size- 1200mm L x 675mm W x 850mm H plus 150. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Two Sink Unit: TOP- 16 SWG Stainless Steel 304 Grade 25 MM Deep with 150 MM Back slash With (2) two Nos. Full Sink 300 mm deep With Stainless Steel 40 mm Dia Sink Waste Coupling Body: Front apron 18 SWG Stainless Steel. LEGS: (4)FourNos 18 SWG Stainless Steel Square Pipes Bush: Adjustable Square Nylon Bush (4) Nos, Overall Size- 1200 mm LX675 mm WX850mm H plus 150.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Under Counter Refer with OHS: Top of 18 swg s.s. Sheet and sides and inner wall covered with 20 swg s.s. Sheet and Puff insulated provided with two doors and two s.s. Wire mashed adjustable trays powered with heavy duty Kirloskar condensing unit with Auto temp. Controller and indicating lamp. Power 675 Kirloskar Compressor Unit. Capacity-300Ltrs. Temp- plus 2°c to plus 8°c Overall Size- 1500mm Lx675 mm Wx850 mm Hx300mm plus 450mm.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS Hood: Made of stainless steel (304), HOOD: MADE OF 18 SWG. 304 GRADE S.S. SHEET, FILTER: FRAME OF 18 SWG.STAINLESS BAFFLE TYPE GREASE FILTER. AIR FLOW CAPACITY 10000 CFM. Overall Size- 5100mm Lx900 mm Wx450 mm H.

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Four Burner Range With Oven: Top and Splash : 1.5mm Thick Ss 304 Grade With Matt Finish , Sides : 1.0 Mm Thick Ss 304 Grade With Mirror Finish, Leg: 1.5” and1” Ss Square 304 Grade With Mirror Finish And Adjustable Bullet Leg. The gas Burner shall be of T-35 high pressure Burner with heavy duty Iron Casting square jolly. Overall Size- 750mm L x 7580mm W x 850mm H plus 150.

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical, plumbing, Drainage upto 2 meter or as site requirement. works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Bain Marie: Top- 1.5mm Thick Ss 304 Grade With Matt Finish , Tank : 1.2mm Thick Ss 304 Grade With Matt Finish, Three Side and Bottom Shelf : 1.0 Mm Thick Ss 304 Grade With Mirror Finish, Leg: 1.5” Ss Square Pipe 304 Grade With Mirror Finish And Adjustable Bullet Leg Vessel : GN Pan 6 no. of 1/2 - 150mm deep ( 10.5x13x6 inches) Electric Heater of 3kw Heater With Control Unit. Overall Size- 1200mm L X 675mm W X 850mm H. `

`Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. SS DRAINAGE: Frame Made of 1``x1`` square pipe and supported by 3/4`` ss square 304 pipe of 16 swg. Outer frame made up off 25x25x3 ss 304 angle. Surface Finish Mat Polish Bufing. .. `

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. Gas Lining with accessories Approx in RUNNING FEET. Made of Tata C class pipe of 3/4 inches. ....

Supply, Installation, Testing and commissioning of Kitchen Equipments which consists of following items(Suitable necessary Civil,Electrical works to be carried out and with necessary finishes in good manner by the agency without claimimg extra charges to the entire satisfaction of Engineer/Client incharge. G.I Ducting: Made G.I sheet of thickness 22 gauge with suitable fastners and nut bolts. Approx in sqft.