Public Works Department Tender

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required. [Through Rate]

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core [Through Rate]

[24.5.2.3]MISCELLANEOUS ITEMS 2.3. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 63/50 mm outer dia/inner dia [Through Rate]

[24.7.2]RCC FOUNDATIONS FOR DG SET 2. 60 to 90 KVA DG Set [Through Rate]

Supply and erection of MS Saddle and clamps duly galvanized , on wall / RCC parapet for fixing underground cable at a distance of 0.60 meter center to center fixed by means of raw plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. (Rates are Excluded GST)

HSR 24.13 Providing and Erection/ Laying of PVC/ XLPE insulated underground aluminum conductor underground cable loose in existing pipe or trenches complete in all respect with necessary connection upto The Entire satisfaction of Engineer- in- Charge -of the Work 50 Sq mm 3.5 core (Arm.) HSR- 24.13.46

Supply, Erection, Testing and Commissioning of 58.5 KVA/ 62.5 KVA TP DG SET confirming CPCB IV plus Norms, 3 Phase, equivalent to or comprising of Kirloskar Grern Model no. (KG4-58.5 WS), Radiator cooled, developing 74 BHP at 1500 RPM with base frame , Alternator (capable of delivering 46.8 KW output @ 0.8 power factor), 50 Hz, 415 V, Class with temp rise limited to class H at 40 deg C ambient), Static exication system, Lube oil system, mechanical type governor (Class G2 Governing) including microprocessor based Gen set Controller as per Kirlosker Standard design , Manual Control Panel (3 Pole MCB/ MCCB), AVM pads, 01 Nos of 12 Volt Lead Acid type Battery with Copper leads, sutable for 3 Consecutive starts, Silencer as per approved design of Kirlosker with bellows/ inbuilt day oil tank of suitable capacity, terminal arrangements including cable terminal box suitable for terminating of termination box suitable for terminating of recommended size Al cable with battery charger all other associated accessories.(RATES ARE EXCLUDING GST) Make: Kirlosker/Crompton Grieves/Cummins/Mahindra