Public Works Department Tender

SITC of lmage device/ Sensor - 1/3` Progressive Scan CMOS or Better Bullet Camera Resolution -2 Megapixel or better Frame rate Up to 30 fps or better Lens Type - 3 to 9 mm auto varifocal lens Motorized IR Light and Distance - Ir Range upto 30 mtrs or better Signal to Noise Raio - )50db Minimum lllumination - 0.005Lx Color: lR LED ON 0.0 Lux or better Day Night - Auto Day/Night with switchable IR cut filter Video Compression - H.265, H.264, M-JPEG Camera should have Multiple Streaming- Min. Triple Edge Based Analytics - Tripwire, motion Detection, Intrusion Detection . Storage - SD Card slot should be expandable up to 256 GB System Compatibility – ON VIF Profile SandG Privacy Masking - Minimum 4 Privacy zones or higher Protocols - lPv4/lPv6, HTTP, HTTPS, TCP/lP, UDP, UPnP, ICMP, RTSP,RTP, SMTP, NTP, DHCP, DNS, DDNS Noise Reduction - Digital Noise Reduction on/off. WDR -120dB WDR Alarm Input/Output - 1 Alarm Input, 1 Alarm OutPut Audio Input/Output - 1 audio input/1 audio output Operating Environment – lndoor/ Outdoor Operating Temperature -400C to 600C lngress protection and vandaI resident standards - lP66 or better and IK10 or better Certification- UL, FCC, CE, RoHS Complete in all respect upto entire satisfaction Engineer in charge of works. Approved makes Axis /Pelco/ Bosch /Avigilon /Honeywell

SITC of 32 Channel NVR (Network Vedio Recorder), for recording upto 32CH @ 1080P with 04 nos. SATA HDDs minimum with 16TB storage or more (recording requirement all cameras recording at 2MP, 25fps for 30 days) H.265 / H.264 /MJPEG /MPEG4 codec decoding, Front Control Pannel with LEDs Indication, 3 nos. USB, iPhone: iPad: Android based Mobile clients, Video Export feature on USB, Search Mode: Time/Date: Alarm: Motion Detection (MD): Exact Search (accurate to a second): Smart Search, Dual HDMI Output, Alarm Input (16 nos.), Alarm Output (6 nos.), 8 POE Ports, eSATA Device, 320Mbps each Incoiming and Outgping throughput, Operating Temperature –10°C to 55°CCertification : CE, FCC and UL including fixing accessories and cable termination with required connectors/Jack, complete in all respect as per instruction of engineer in-charge. Approved makes Axis /Pelco/ Bosch /Avigilon /Honeywell

SITC of Layer-2 POE plus Gigabit Ethernet 1RU chassis with 24 PoE 10/100/1000 BaseT ports and 4 Gigabit SFP ports. Includes an internal AC power supply 370W atleast or higher power budget) with a power cord, manuals access card, and RJ-45 to DB-9 adaptor.The Access Switch should have 4 ports of 1 G SFP.The Access Switch should provide Non-Blocking switch fabric capacity of 56 Gbps or more. L-2 switch should provide wire-speed packet forwarding of 41 Mpps or more. L-2 Switch should support min 16K MAC addresses and min 4000 active VLANs. Make:Cisco/Juniper/D-Link

SITC of 43` LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, Make: LG/Panasonic/Samsung

SITC of 24-port 19` 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19` 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated Make :-RandM/D Link/Molex

SITC of 12 U Rack with 2 side FAN with 3 socket PDU with 15 AMP DP for power surge safty. With pole mount accessories. Rack should be certified. Make: Valrack,Netrack,Comrack

SITC of 1 KVA online UPS with one hour backup complete in all respect.MAKE APC/ Miicrotek/DELTA/Emerson

Supply,Erection testing and Commissioning of UTP cat 6 information outlet( RED - for Data - User End) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link

Supply,Erection testing and Commissioning of UTP Face plate(Single/dual) complte in all respect upto the entire satisfaction of Engineer-in-Charge of the workMake:- RandM,/Molex/D-link

Supply,Erection testing and Commissioning of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link 3 FT lenth

Supply,Erection testing and Commissioning of UTP cat 6 Mounting Patch Cords Low smoke zero helogene (LSZH/LS0H )complte in all respect upto the entire satisfaction of Engineer-in-Charge of the work Make:- RandM,/Molex/D-link 7 FT lenth

Supply,Erection testing and Commissioning of Edge Switch 24 Port 10/100/1000 plus 2 10 G SFP Layer 2 manageble Base T Manageble auto sense, Ethernet switch complete in all respect up to the entire satisfaction of Engineer-in charge of work . Make:CISCO/Juniper/Alcatel/D- Link

SITC of Digital Hybrid IP-PBX System configured for 04 Analog Trunk Connectivity, 4 Digital Extensions, 16 Analog Extensions. It should be possible to reach the capacity of system to 296 ports and99 IP users without any add-on CPU or chassis/hardware platform. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The system shall have built-in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. Make : Avaya/Unify/Matrix

Supply, Erection, testing and commissioning of Push Button Telephone Desktop model CLI, flash , redial ,mic with speaker complete in all respect.Make :-Beetel

S/E of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis 20 Pair

Supply of ABC Stored Preassure type Fire Extinguisher 5kg. Capacity (5 year warranty) bearing ISI Mark for fire fighting ABC class of fire extinguisher will be manufactured strictly as per BIS IS:683:2006 bearing ISI Mark EN3 615 approved powder (MAKE CEASEFIRE / SAFEX/ SAVEMAX)

Supply of Co2 type Fire Extinguisher 4.0 Kgs capacity made from brand new seamless cylinder, as per ISI 7285 and CCE approval, fitted with a Discharge hose and horn and squeeze Grip type valve with initial charge as per ISI 15683:2006 specification, bearing ISI Mark.(Make - Cease fire/ Savemax/ SAFEX).