Public Works Department Tender

[23.22.1.3]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.3. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 16 to 100 Amp, 25 KA

[23.22.1.4]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.4. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 125 to 160 Amp, 25 KA

[23.22.1.5]MCCB ,DISTRIBUTION BOARDS, MCB`s, RCCB`s, CHANGE OVER etc. 1.5. Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. TRIPLE POLE MCCB 200 to 250 Amp, 25 KA

[23.23.6.1]MISCELLANEOUS 6.1. Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. MS perforated cable tray painted with powder coating 100 X 50 X 2 mm

[23.23.7.1]MISCELLANEOUS 7.1. Supply and erection of cable tray cover made of 1.25 mm thick GI sheet as required including erection of the same on existing cable tray with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work. GI cable tray Cover , suitable for cable tray of 100 X 50 X 2 mm

[23.24.4.4]MS STAND, BUS BAR CHAMBER AND PANELS 4.4. Supply, installation, testing and commissioning of load bank with digital meter module cost of digital Amp. / volt meter with selector switch wiring ( but EXLUDING COST of incoming and outgoing MCCBs ) etc.suitable for operation of 240/415 volts A.C. Supply with both side cable allay, inter connection and fixing the same in existing MS pedestal/wall complete with all labour and material required for the same up to the entire satisfaction of Engineer-in-Charge of work. Load Bank 8 way 400 amp.

[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material.

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required.

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode.

[24.1.7]EARTHING AND LIGHTENING ARRESTOR 7. Supplying and laying 25mm x 3 mm G.I. strip in 40 mm dia,GI pipe as/from earth electrode including soldering etc. as required.

[24.1.8]EARTHING AND LIGHTENING ARRESTOR 8. Providing and fixing 25 mm x 3mm G.I. strip on surface or in recess for connections etc. as required with all labour and material.

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required.

[24.2.7.3]LT CABLE 7.3. Supply and erection of suitable compression type brass cable glands for underground Cable :- 25 sqmm to 50 sqmm Cable 2 to 4 Core

[24.2.7.6]LT CABLE 7.6. Supply and erection of suitable compression type brass cable glands for underground Cable :- 240 sqmm to Cable 3 to 32 Core

[24.2.8.13]LT CABLE 8.13. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 240 sqmm

[24.2.8.6]LT CABLE 8.6. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 35 sqmm

[24.2.8.7]LT CABLE 8.7. Supply and erection of aluminium lugs heavy duty including crimping etc. up to the entire satisfaction of the Engineer-in-charge of the work. 50 sqmm

[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm

[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm

[24.5.2.6]MISCELLANEOUS ITEMS 2.6. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia

Supply and erection of lighting arrestor model ISI Marked suitable for 11KV 3 Phase 50 HZ ground neutral system comprising of spare gape type queen gap type in series with non linger resistar element house in Horizontally scale poreclam bushing with line and ground terminal along with mounting clamps conforming to ISS 3070 (Part-I) of 1985 with latest amendment with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.

Supply and Erection MS bucket stand which including cost of 6 nos. buckets of 9 liter capacity with sand filling including cost of welding and painting of complete stand and buckets with one coat of red oxide and two coats of approved paint of red colour with all labour and petty material to complete the job in all respect upto the entire satisfaction of Engineer-in-charge of work.

Supply, Erection , testing and commissioning of 11 KV outdoor type HT Metering panel complete with CTs, PTs cubical, and electronics Meter with accuracy class 0.2 as per requirement / approved by UHBVN. Panchkula Electrical Supply consists of following : i) Cubical panel free-standing floor mounting type made of sheet steel 14 G SWG CRCA sheet with channel iron base frame spray-painted with strong synthetic grey channel paint as per size and design approved by UHBVN. PANCHKULA Electrical Supply.Outdoor Type with outer canopy. ii) 3 nos. 11 KV CTs of 0.2 S accuracy (rating as per requirement given by UHBVN Panchkula). iii) 1 no. 11 KV PTs 11000/110 volts 10 VA burden 0.2 accuracy suitable for indoor installation of approved make of UHBVN Panchkula Electrical Supply. iv) Digital electronics meter 3 Phase 4 wire 11000 / 110 volts 10 VA burden 0.2 accuracy for recording reading of KWH of make and rating approved by UHBVN Panchkula Electrical Supply with push-button display operating system for different kind of readings. v) Foundation of Suitable Size 300mm above ground level made of CC having the suitable size to hold the metering panel vi) Outer housing fab by 2mm thick CRCA sheet to cover the HT Metering Panel from rainwater alongwith agnle iron frame. vii) The cubical panel will be complete in all respect including interconnections, internal wiring with PVC copper cable its testing/approval of all items by UHBVN Panchkula Electrical Supply with a guarantee of one year from the date of commissioning including the cost of all labour and material required to complete the job in all respect upto entire satisfaction of Engineer-in-charge of work.

Supply , Erection , testing and comissioning of Stey Set for GO Switch complete in all respect i/cost of Disc insulator etc. upto the entire satisfaction of Engineer -in Charge of work.

Supply, Erection, testing and commissioning of GI Fancing 7.5 Feet High From Finish Floor Level supported with GI Angle/ Channel complete in all repect upto the entire satisfaction of Engineer -in Charge of work.

S/E of PCC Pole 9 Meter long 105mm x 115mm at top and 105mm x 315mm at the bottom (as per IS 1678-1960) with a working load of 200kg buried 1.80 m in-ground with all satisfaction of EIC of work . Make as per UHBVN.

Supply and Erection of PVC insulated aluminium armoured cable of size 50 Sqmm x3.5 Core 1100 Volts grade as per drawings to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work.

Supply and Erection of PVC insulated aluminium armoured cable of size 35Sqmm x3.5 Core 1100 Volts grade as per drawings to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work.

Supply and Erection of PVC insulated aluminium armoured cable of size 240 Sqmm x3.5 Core 1100 Volts grade as per drawings to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work.

Supply and Erection of HT PVC insulated aluminium armoured cable of size 95 Sqmm x 3Core 1100 Volts grade to complete the job in all respect up to the entire satisfaction of Engineer in Charge of work.

Supply, installation, testing and commissioning of 11KV Oil type Outdoor type transformer 500KVA capacity, 3Phase, 50Hz alongwith spefication i.e. Copper Double Wound, Oil Immersed, Naturally Cooler, Core type Transformer confirming to IS : 2026-14, with Latest efficiency level with first filling of Oil as per IS : 335. Output- 500KVA, No load voltage ratio at rated voltage and frequency - 11 / 0.433 KV, Cooling type- ONAN, Off Load tap changer, taping range and step (Plus/ Minus/ Step) - (5%/ -10%/ 2.5%), vector group- Dyn-11, Temp rise at rated load on Ambient- 50 Deg C, Paint Shade to IS : 5 (Epoxy) alongwith rating and diagram plate, earthing terminal (2Nos.), lifting lugs, air release hole with plug, dehydrating silica gel breather, magnetic oil level guage, oil filling hole with plug on conservator, oil conservator with drain plug, thermometer pocket, jacking lugs, bottom drain cum filter valve, top flter valve, 4Nos. bi directional rollers, explosion vent with diaphram, marshelling box, 100mm OTI with alarm and trip, WTI with alarm and trip, buchholz relay with alarm and trip, shutt off valves for buchholz relay (2Nos.) Magnetic Oil level gauge, Radiator - fixed and cable box - HV/ LV side complete in all respect upto the entire satisfaction of Engineer- in- charge of work. Make as per approved list

Supply Installation, testing and commissioning APFC PANEL 250 KVAR Incoming feeder :- 01Nos. 400A 3P plus NL MCCB 50 KA With Thermal Magnetic Release For {O/C, S/C}Protection Spreader Terminal Extended Rotary Handle 8 Stage APFCR Relay, Sensing 415Vac, Built-in PF Meter, CTR -/5A, 144 Sq Mm Aux, Supply 220Vac R/Y/B Phase Indicating Lamps (LED TYPE) MCB 6-20A,DP 10KA `C` Curve 6A, SP, MCB, 10KA For Control Ckt. 6A Neutral Link Dropout Type, For Control Ckt. 5 KVAR Capacitor Banks :- 01 Nos. MCB 16A,TP 10KA `C` Curce Capacitor Duty Contactor 5 KVAR 240Vac. Addon Block 1No plus 1NC 11 KV 800A ICOG VCB PANEL. Incoming and Outgoing Feeder :-01 Start Stop Push Button Auto/Manual Selector Switch 10 KVAR Capacitor Banks :- 02 Nos. MCB 32A,TP 10KA `C` CurceCapacitor Duty Contactor 10 KVAR 240Vac. Addon Block 1No plus 1NC 10 KVAR Capacitor Bank MPP Type Standard Duty 440Vac ON-Off Indicating Lamps (LED TYPE) Start Stop Push Button Auto/Manual Selector Switch, 25 KVAR Capacitor Banks :- 9 Nos., MCB 63A,TP 10KA `C` Curce, Capacitor Duty Contactor 25 KVAR 240Vac., Addon Block 1No plus 1NC, 25 KVAR Capacitor Bank MPP Type Standard Duty 440Vac, ON-Off Indicating Lamps (LED TYPE), Start Stop Push Button \, Auto/Manual Selector Switch BUSBAR - Main Bus Bar TPN Copper busbar made from Electrical Grade Copper flats (E-91-E) 400 AMP Duly supported on DMC insulators and covered with heat shrinkable sleeves. Enclosure, Bus Bar and Wiring and Accessories MS Cabinet with integrated Base Frame and Powder Coated Paint Hardware and Accessories - Nuts, Bolts, Washers Door Hinges and Locks, Neoprene Rubber Gaskets. Mounting Plates, MS Channels, Partitions, Lifting Hooks and Gland Plates. PVC Wires, Ferrules Thimbles and Other Wiring Accessories. Consumables, Design and Development, Drawings Manufacturing Cost i.e. Fabrication, Painting, Bus Bar fitting, Handling and fitting of switchgears with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works. Make as per approved list

Supply and erection of 11 KV 800A ICOG VCB PANEL. Incoming and Outgoing Feeder :-01 11 KV ,800A,TP EDO , 26.3 KA Vacuum Circuit Breaker with Following Accessories Spring Charge Motor 230Vac Shunt Trip Coil 24 Vdc Closing Coil 24 Vdc. Auc Contact 3 No plus 3 Nc Manual Operation Counter Safety Shutter Mechanical On -Off Push Button Mechanical On -Off Indicator 24Vdc. Manual Spring Charge Handel. Breaker Control Switch, 16A 2 Pole, 2 Way With Off Protection Relays 3 Phase Microprocessor Based Feeder Protection Relay (ANSI 50 plus 50N,51 plus 51N) with RS-485 Master Trip Relay (ANSI 86) Aux Relay 3 Elements (ANSI 63X) Metering and Instrument Transformer Digital VAF Meter Class-1.0, 96X96 Sqmm Current Transformer Dual Ratio Dual Core WPL Type Core -1 :- 200-100/5-5A ,CL-1 ,15 VA/ for Metering Core -2 :- 200-100/5-5A ,CL 5P10, 15VA for Protection Potential Transformer Dual Core Resin Cast Withdrawable type with Fuse Ratio :- 11kV/r3/110V/r3 , 100VA Indicator Lamp and Accessories.Auxiliary Contactor 2NO plus 2NC Contacts, 24Vdc ON/OFF/TRIP/SC Indicating Lamps (LED TYPE) 24 Volt DC R/Y/B Phase Indicating Lamps (LED TYPE) (63.5Volt) Emergency Mushroom Head Push Button Illuminated Push Button 110 Volt DC Toggle Switch 10A,240Vac Selector Switch 6A, 2 Pole 2 Way 6A, SP, MCB, 10KA For Control Ckt.20A, DP, MCB, 10KA For Control Ckt.6A, DP, MCB, 10KA For Control Ckt.Power Pack 220/24V DC, 7AH Hooter 24 Volt DC Space Heater 80 Watt 230 Volt AC Thermostat 30-85°C Single Change over Combined Box 16A ,3 Pin Single Phase Panel Illumination Light with Door Limit Switch 32A Neutral Link Dropout Type, For Control Ckt. Enclosure, Bus Bar and Wiring and Accessories MS Cabinet with integrated Base Frame and Powder Coated Paint Hardware and Accessories - Nuts, Bolts, Washers Door Hinges and Locks, Neoprene Rubber Gaskets. Mounting Plates, MS Channels, Partitions, Lifting Hooks and Gland Plates. PVC Wires, Ferrules Thimbles and Other Wiring Accessories. Consumables, Design and Development, Drawings Manufacturing Cost i.e. Fabrication, Painting, Bus Bar fitting, Handling and fitting of switchgears.with all labour and material required to the complete in all respect up to entire satisfaction of the Engineer-in-Charge of the works.Make as per approved list