Public Works Department Tender

[23.24.1]MS STAND, BUS BAR CHAMBER AND PANELS 1. Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete, duly painted with three coats of approved paint including one coat of red oxide. [Through Rate]

[23.26.1]SAFETY ITEMS 1. Supply and erection of Medium Voltage caution notice plate of size 200*150 mm in three languages. [Through Rate]

[23.26.2]SAFETY ITEMS 2. Supply and erection of High Tension Voltage caution notice plate of size 250*200 mm in three languages. [Through Rate]

[23.26.3]SAFETY ITEMS 3. Supply and erection of shock restoration chart in glass frame. [Through Rate]

[24.1.1]EARTHING AND LIGHTENING ARRESTOR 1. Earthing with GL earth pipe 4.5 m long and 40 mm dia with masonry enclosures on the top etc. (but without charcoal or coke and salt) as required. [Through Rate]

[24.1.10]EARTHING AND LIGHTENING ARRESTOR 10. Providing and fixing 25 mm x 5mm copper strip on surface or in recess for connections etc. as required with all labour and material. [Through Rate]

[24.1.2]EARTHING AND LIGHTENING ARRESTOR 2. Extra for using salt and char coal/coke for pipe earth electrode as required. [Through Rate]

[24.1.3]EARTHING AND LIGHTENING ARRESTOR 3. Earthing with G.I. earth plate 600 mmx 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required. [Through Rate]

[24.1.4]EARTHING AND LIGHTENING ARRESTOR 4. Earthing with tinned copper earth plate 600mmx600mmx3mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) etc. complete as required. [Through Rate]

[24.1.5]EARTHING AND LIGHTENING ARRESTOR 5. Extra for charcoal or coke and salt for G.I. plate or copper plate earth electrode. [Through Rate]

[24.1.6]EARTHING AND LIGHTENING ARRESTOR 6. Supplying and laying 25mm x 3mm G.I. strip at 0.5 metre below ground as strip earth electrode including soldering etc. as required. [Through Rate]

[24.1.9]EARTHING AND LIGHTENING ARRESTOR 9. Providing and fixing 25 mm x5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required. [Through Rate]

[24.2.9.1]LT CABLE 9.1. Supply and erection of straight through joint (cable jointing kit) 1.1 KV grade complete with required quantity of resin, hardener, plastic mould G.P. Putty, adhesive, earth continuity, connections and fixing the same in position complete with joint etc. - Straight through Joint. For 1.5 to 6 sqmm Cable 2 Core [Through Rate]

[24.3.3.1]HT CABLE 3.1. Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.3.4.1]HT CABLE 4.1. Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :70 to 120 sqmm [Through Rate]

[24.4.6]STREET LIGHT 6. Supply and erection of Three Phase weather proof M.S. box of size 30 cm x 20 cm x 15 cm with hinged cover made of 2 mm thick MS sheet, locking arrangements, housed in wall/fixed on pole , including the cost of 1 no 4 way 16 A Bakelite connector, 1 no. 16 amp TP MCB and 4 Nos. 16 amp. neutral links fixed on Bakelite sheet in the M.S. box and necessary connections. [Through Rate]

[24.5.2.6]MISCELLANEOUS ITEMS 2.6. S/E mark double walled corrugated (DWC) HDPE, pipe 10 Kg/Cm2 ,laid 0.75 Metre below ground level including digging and refilling of earth including cost of suitable size socket/coupler for HDPE pipe including the cost of labour and material required to complete the job in all respect up to the entire satisfaction of Engineer in charge of the work. DWC/HDPE pipe 145/123 mm outer dia/ inner dia [Through Rate]

[24.7.4]RCC FOUNDATIONS FOR DG SET 4. 125 KVA DG Set [Through Rate]

Supply and erection of MS Saddle and clamps duly galvanized , on wall / RCC parapet for fixing underground cable at a distance of 0.60 meter center to center fixed by means of raw plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. (Rates are Excluded GST)

Supply and erection of Rubber Mat 1mx2mx 12mm thick suitable for 11/33 KVA as per IS No. 15652C/M/L 3017739 as per approved by Chief Electrical inspector, Govt. of Haryana (Excluded GST)

Supply Erection testing and Commissioning of 11 KV HT metering panel complete with C.Ts P. Ts. Cubical and electronic meter with accuracy class as per requirement/approved by DHBVN at the time of installation, consisting of the following. (As per Approved by DHBVN). Cubical panel free standing floor mounting type made out of sheet steel 14 SWG CRCA sheet with channel iron base frame spray painted with strong synthetic light grey enamel paint as per size and design approved by the DHBVNL 3 Nos. 11 KV CTS of rating as approved by DHBVNL for indoor installation of appd. Make of 1 Nos. 11 KV PTs 11000/110 Volts Oil filled suitable for indoor installation of approved make DHBVNL. Space for Digital Electronic Meter 3 phase 4 wires recording in KWH and rating and accuracy as by DHBVNL with push button display operating system of different kind of readings. The cubical panel will be completed in all respect including intter connection, internal wiring with PVC copper cable, its testing and approval of all item by DHBVNL including cost of all testing/ approval charges of all items of DHBVNL with a guarantee of one year from the date of commissioning including cost of all labour and material required to complete the job but excluding the cost electronic meter in all respect up to the entire satisfaction of the engineer in charge of the work.(Excluded GST)

S/E of fire bucket 9 Ltrs Capacity of G.I. sheet of 24 gauge write with ` FIRE` as per fire specification.(Excluded GST)

S/E of MS bucket stand suitable for six Nos. fire buckets (but without buckets) including the cost of welding and painting with all cost of red oxide and two coat of enameled paint of red colour completion all respect.(Excluded GST)

Supply and erection of 11 KV pin insulator with pin make with all labour and material required to complete the job including fixing the same on existing channels up to the entire satisfaction of Engineer-in- Charge of the work.(Excluded GST)

Supply and erection of 11 KV gang operated switch make conforming to IS with latest amendment including suitable size of copper blade erection of same on the existing `H` pole with the help of 3 No. channels of size 75 mm x 40 mm x 6 mm, 1.8 M long fixed with suitable size of MS clamp, nuts and bolts including cost of 6 No. 11 KV insulator with GI pin R.D. fuses and painting with 2 coat of approved paint and one cost of red oxide and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of work.(Excluded GST)

Supply and erection of 11 KV disk insulator with all labour and material required to complete the job including fixing the same on existing channels up to the entire satisfaction of Engineer-in- Charge of the work. (Excluded GST)

Supply and erection of lightening arrester module suitable for 11 KV G.O. switch with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.(Excluded GST)

Supply and Erection of PCC Pole 11 Mtrs long complete in all respect as per DHBVN specifications and upto the entire satisfaction of Engineer-in-Charge. (Excluded GST)

Construction of a suitable size of foundation is suitable for 500 KVA transformer. The foundation shall be of PCC type with a ratio of 4:2:1. The length and breadth of the foundation shall be 300MM more than the respective length and breadth of the transfer. The height of the foundation shall be 400MM i.e. 200MM below and 200MM above of the ground level complete in all respects up to the entire satisfaction of the Enginner-in-Charge of the work.(Excluded GST)

S/E of 150 W LED Flood light luminaries with high power LED ) 120 Lumens per Watt in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. Excluding GST Make- Philips / Bajaj/ Wipro/Surya Roshni

HT SWITCHGEAR 11kV 630Amps 21KA/3 sec. Non-Extensible Ring Main Unit Compact switchgear consisting of (CCV) TWO Numbers of load break switch and One number Fixed Manual Vacuum Circuit Breaker in SF6 insulated stainless steel enclosure with series trip, self powered microprocessor based numerical over current and earth fault relay protection.. Interconnection between HT Switchgear and primary of transformer shall be done through 1C x 3R x 95 sq.mm Aluminium Unarmoured XLPE cable (Make: ABB/Schneider Electrical/Siemens. ) 1 No. Relay shall be of Ashida make of Model No: ADR 241S with communication port 1 No. Protection CT shall be 40/1A 2.5VA 5P10. (Make: ECS/Ericon/Bharti Electricals/equiv) 1 set Manometer 1 No. All modules of the RMU shall be capable for cable termination of 3C x 300 sq.mm unarmoured Al XLPE Cable TRANSFORMER 500 KVA 11KV/433V DYn11 Oil Filled Hermatically sealed transformer with corrugated wall and without conservator type design and Top normal porceilein bushing for HT and LT with COMPACT OCTC of range plus 10% to -10% insteps of 2.5%. Temp rise over an ambiant temp. of 50Deg C : shall be 40/45 Deg C for Oil/winding resp. Insulation Class A: Losses ( Subject to IS 1180 Efficiency Level 2: 2014) Impedance shall be 4.5%.( Subject to IS Tol) ( Make : Voltamp / ABB/ Siemens) 1 No. Oil and winding Temperature Indicator with 1 alarm and trip contact 1 No. LVS PANEL 800AMPS Aluminum Busbar (100% FOR PHASES AND 50% FOR NEUTRAL) - CURRENT DENSITY OF Aluminum as 1 A/sq.mm. LT panel shall be made up of 1.5mm/2mm thick CRCA sheet OUTDOOR ENCLOSURE Outdoor type enclosure having construction of Galvanised Sheet Steel having 1.5/2mm thickness for Non-load Bearing and load bearing partition sheets and Door with 4 mm base frame. The Enclosure shall have IP54 degree of protection for HT and LT switchgear compartment and IP23 degree of protection for Transformer compartment. The enclosure exterior shall be Powder Coated (colour Light Gray and D.A.Gray ). Each compartment will be provided with the door and pad locking arrangement. The Compartment illumination lamp with door operated switch shall be provided for MV and LV compartment. As per IEC 62271-202 and K10 Class 1 Set INTERCONNECTION AND EARTHING Interconnection Between HT switchgear and Transformer using 1C x 3R x 95 Sq.mm XLPE Single core cable and Interconnection between Transformer and LT switchgear using Aluminum Busbars. Internal earthing connections including transformer neutral by using 50 x 6 mm GI Strips. 1 Set (Rates are exclusive GST) Make OF CSS: ABB/Schneider Electrical/Siemens.

Supply, installation, erection commissioning and testing of 3 phase 160 KVA (CPCB-IV plus ) DG Set Comprising of `Greaves` Engine Model No. :- 6G11TAG32, radiator cooled developing 196.6 BHP @1500 RPM, Complete with CRDi/Mechanical Governer, standard accessories coupled to alternator rated at 128KW/160KVA at 415V, mounted on channel iron base frame complete with fuel tank and 12V and with the latest alongwith AMF panel and other standard accessories. (Make: Cummius/ Crompton Greaves/ Kirloskar). Exclusive GST

24.13.18 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 10 Sqmm 4 Core Ard. Cable (Exclusive GST)

24.13.24 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 16 Sqmm 4 Core Ard. Cable (Exclusive GST)

24.13.32 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 25 Sqmm 4 Core Ard. Cable (Exclusive GST)

24.13.38 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 35 Sqm m 3.5 Core Ard. Cable (Exclusive GST)

24.13.46 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 50 Sqmm 3.5 Core Ard. Cable (Exclusive GST)

24.13.54 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 70 Sqmm 3.5 Core Ard. Cable (Exclusive GST)

24.13.70 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 120 Sqmm 3.5 Core Ard. Cable (Exclusive GST)

24.13.100 PROVIDINGand ERECTION/ LAYING OF PVC/ XLPE INSULATED UNDERGROUND ALUMINIUM CONDUCTOR UNDERGROUND CABLE LOOSE IN EXISTING PIPE OR TRENCHES COMPLETE IN ALL RESPECT WITH NECESSARY CONNECTION UPTO THE ENTIRE SATISFACTION OF ENGINEER IN CHARGE OF THE WORK. 400 Sqmm 3.5 Core Ard. Cable (Exclusive GST)

24.16.4 Providing and erection/ laying of XLPE (E) 11 KV HT Aluminium Conductor Armoured Cable ISI Mark Laid in Existing pipe/ Trenches/ Surface with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-In-Charge of the Works 95 Sq mm 3 core (Exclusive GST)

Supply and erection of main LT panel, Panel Size - 2000 L x 2125 H x 800 D mm, incomming 1 No. ACB 800 amp FP 50 KA MDO with microprocessor based SR18G, 2 nos indiaction ON/OFF, 3 nos CT`s 800/5 ratio, Digital Voltmeter and Ammeter with selector switch 1 no., 3 no. control MCB, 3 no. Phase indication RYB and 1 no.nuetral link 32A on incoming side and outgoing 1No. MCCB 400 amp TP 50 KA DN3, 1 No. Spreader link TP DN3-400A, 1 No. Extended rotary handle DN3, 5 No. MCCB 250 amp TP 50 KA DN2, 5 No. Spreader link TP DN2, 5 No. Extended rotary handle DN2, 3 No. MCCB 100 amp TP 25 KA DN0, 3 No. Spreader link TP DN0, 3 No. Extended rotary handle DN0 on Outgoing side including foundation complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. Make: Precision/ L and T/ ABB (Excluding GST)