Public Health Engineering Department Tender

MAIN PUMPING STATIONS 3.00 MLD Design, construction, erection, testing and commissioning of MPS and following components.RCC Inlet chamber, Screen Chamber, rectangular collecting tank suitable for 3.00 MLD average flow with peak factor of 3.00 landscaping of the campus providing and installing of 5 No. Pumping Set of i.e., no. 6300 LPM (378 Cum per hour), 2 no. 2100 LPM (126 Cum per hour)and 2 no. 1100 LPM (66 Cum per hour) with 30 mtr. Head,K9 DI pipe of suitable dia at MPS including welding and screwing of flanges,3 Nos. CI Gear Operated Sluice Gate with SS Spindle,Supply and installation of 2 Nos. mechanical course screens of minimum length 6 mtr for 3.00 MLD, All the infrastructure except construction of staff quarter, and path ways/ roads required to be executed at site to make the MPS,All the pumping machinery, panel board, Level sensor etc shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS site through broadband internet facility. The size and quantities of all the above components will be as per approved structural/ Hydraulic / Mechanical/ Electrical design to be approved by Departmental before actual execution of work,CCTV CAMERAS:-Providing and Installing CCTV 2 Cameras for MPS complete as per satisfaction of the Engineer– in- Charge, ) At MPS Site- 1 No. PTZ speed dome 360 degree 50 x zoom camera, 3 No. 12 mm lens size including 0andM of 5 years after 12 months defect liability and 3 months trail run period.

Design, construction, erection, testing and commissioning of 3.00 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor (SBR) Technology complete in all respect including, Landscaping, MCC Panel Room and all other contingent Electrical, Mechanical, Electromagnetic Flow Measurement Device on inlet and outlet, Real Time water quality monitoring with Data collection system (Online analyzer) Piping and Instrumentation works with PLC and SCADA Arrangement for STP along with Synchronizing it with each other including furniture and laboratory equipments as per detail given in the bid document and including following components. Providing and Installing CCTV 4 Nos. Cameras for STP complete as per satisfaction of the Engineer– in- Charge.K9 DI pipe of suitable dia at STP,(4 No. High Mast of 9 mtr. GI Octagonal pole,Providing and installing 2 No. centrifuges,ONLINE OUTLET EFFLUENT WATER QUALITY MONITORING SYSTEM FOR BOD, COD, TSS, PH.Supply, erection, testing and commissioning operation and comprehensive annual maintenance of effluent quality monitoring system at 3.00 MLD STP for online (Continuous) measurement of PH, Total Suspended Solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors includig 0andM for 5 Years after 12 months defect liability period and 3 months trial run period.

Construction of HT/LT Panel room, PLC room, Centrifuge house, blower room and Lab cum office building including doors, window and fitting with toilet block including sanitary fittings STP site covered area with RCC framed structure of brick work vitrified glaze tiles flooring, powder coated aluminum frame of size 100mm x 45mm of 10 gauge for chowkhat frame, 75mm x 45mm of 10 gauge for door frame, 45mm x 45mm of 10 gauge for window frame, 5mm thick glass AIS/Saint Gobin/Modi Float, covered area 1 sqm. including 0andM of 5 years after 12 months defect liability and 3 months trail run period.