Public Health Engineering Department Tender

MAIN PUMPING STATIONS Design, construction, erection, testing and commissioning of MPS and following components including OandM for 5 years after one year defect liability period and 3 month trial run period:- as per detail attached RCC Inlet chamber, Screen Chamber, rectangular collecting tank in Two Comparments with partition wall, panel room of 35sqm suitable for 14.00 MLD average flow with peak factor of 2.25 landscaping of the campus providing and installing of 5 No. Pumping Set of i.e.1 no. 25000 LPM (1500 m^/hr), 2 no. 8333 LPM (500 m^/hr) and 2 no. 4167 LPM (500 m^/hr) with 15 mtr. Head each suitable LT panel equipped with all safety devices, automatic capacitor bank and submersible cable form LT panel to pump sets complete in all respect. K9 DI pipe of suitable dia at MPS including welding and screwing of flanges, ISI marked D.I. fittings, Sluice valves as per requirements even for bye-pass arrangements complete in all respect. 3 Nos. CI Gear Operated Sluice Gate with SS Spindle (SS 410) and seats (SS 304) (2 nos. for screen and 1 no. for partition of collecting tank) as per design. Supply and installation of 2 Nos. mechanical coarse screens of minimum length 6 mtr. for 14.00 MLD average flow with peak factor of 2.25:- i) The connecting sewer of same diameter and material of construction, laid at adequate depth between existing sewers to newly constructed structures is included in this scope of work. ii) All the infrastructure except construction of staff quarter, and path ways/ roads required to be executed at site to make the MPS functional is included in the scope of work for lumpsump job. iii) All the pumping machinery, panel board, Level sensor etc shall be controlled by PLC and SCADA and shall be synchronized with PLC panels at MPS and STP site through broadband internet facility. iv) The size and quantities of all the above components will be as per approved structural/ Hydraulic/ Mechanical/ Electrical design to be approved by Departmental before actual execution of work including OandM of 5 years after 12 months defect Liability and 3 months trail run period.

SEWAGE TREATMENT PLANT “Design, construction, erection, testing and commissioning of 12.00 MLD capacity Sewage Treatment Plant based on Sequential Batch Reactor of rectangular shape (SBR)TechnoIogy complete in all Respect including, Landscaping, MCC Panel Room and all Other contingent Electrical, Mechanical, Electromagnetic Flow Measurement Device on inlet and outlet, Real Time Water quality monitoring with Data collection system (Online analyzer) Piping and Instrumentation works with PLC and SCADA Arrangement for STP and MPS along with Synchronizing it with each other including furniture and Laboratory equipments as per detail given in the bid Document and including following components including OandM for 5 Years after 12 months defect liability period and 3 months trial run period. (2 No. High Mast of 9 mtr. GI Octagonal pole of 4 mm thickness (T=100 MM, B= 200 MM, Base Plate- 320x320x20mm), window at 500 mm from Base Plate) 12Nos. Providing and fixing of Solar light 30 watt with dark and motion sensor, 2 level intelligent dimming after 3 and 6 hours of operation, IEC certified solar panel, LM80 certified LED, IP 65 complaint design to protect from rain and dust and UL certified lituimion battery with 2 year system warranty of 6 Mtr. GI pole complete in all respect, along the road and path complete in all respect. Supply and installation of 1 No. Main Gate of (MS) 12 ft. wide main gate and 4 ft. wide wicket gate (total weight not less than 500 kg at STP site. As per satisfaction of Engineer-in- Charge. Providing and installing 2 No. centrifuges (1working plus 1Stand bye both mechanical) including centrifuge feed pump, all fittings, instrumentations, electric panel board etc. as per design & DNIT complete in all respect, including packing dry sludge in 20 kg Bag and supplying the same in Market Kisan Sewa Kendra or as directed by Engineer-in-charge within lead as posited as clause 4.4.5 of NIT including operation and maintenance of 5 Years after 12 months defect liability period and 3 months trail run period.

Main component Operation and Maintenance of Work Sub Component Operation and Maintenance of Work Operation and maintenance of the complete scope of work required to be executed in this DNIT i.e. 12.50 MLD STP, MPS, Flow metrs, analyzers etc. and all electrical, mechanical, horticulture and civil structures for 3 months successful trial run period, one year defect liability period and 5 years thereafter on the commissioning of scheme and plant