Public Health Engineering Department Tender

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 150 mm

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 200 mm

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 350 mm

Supply and errection of street light Lumination 2x28 watt energy saving fitting as per specification. 1527

Providing and fixing aluminum ladder 1’ wide With 1’ center to center aluminum rod of 20 mm i/d complete in all respect. (20’ Long) (Rate without GST)

Supplying, erection, testing and commissioning of Dewatering Pump of 3HP

Provision for Capastor bank complete in all respects.

NS-Item:Designing, providing, fixing, commissioning and testing of GASEOUS CHLORINATION SYSTEM having capacity upto 2000 grams/ hrs. as designed having the control of gas upto 20th part of max. dose The complete system consists of (a)Vacuum regular (b)Measuring Glass Tube (c)Ejector (d) PF tubing (e)Spanner with cylinder opening kye (f)Amonia Gas(Liquid for leaking test (g)1` dia PVC pipe with PVC fitting,ball valves etc.(h)2 Nos chlorine Gas cylinder capacity 100 kg.dully certified and approved by BIS and Explosive Department Govt. of India (i)Electronic chlorine gas leak detector with sensor and hooter (j) Full face mask with canister.

LT. ALLUMINIUM CABLE: Supply erection testing of standard make aluminum armound LT cable for 1100 volts (3.5 core x 95 sqm) grade ISI marked Stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC, galvanised steel flat strip armoured, and overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments for making following connection a) from G.O switch to metering equipment. b) from metering equipment to transformer complete in all respect. Make: Indian Cables Ltd./ Polycab / RR Cables / CAPP / Finolex / Havells / Gloster / Universal / Fort Gloster Industries Ltd./ Indian Cable Co. / Asian Cables Corporation Ltd. 95 Sqmm size 3.5 core

LT. ALLUMINIUM CABLE: Supply erection testing of standard make aluminum armound LT cable for 1100 volts (3.5 core x 150 sqm) grade ISI marked Stranded compact circular aluminium conductor, conductor screen with extruded semi conducting compound, XLPE insulated, insulation screening with extruded semi conducting compound in combination with copper tape, cores laid up, innersheath of PVC, galvanised steel flat strip armoured, and overall PVC sheathed cable conforming to is 7098 (part-2) 2011 with up to date amendments for making following connection a) from G.O switch to metering equipment. b) from metering equipment to transformer complete in all respect. Make: Indian Cables Ltd./ Polycab / RR Cables / CAPP / Finolex / Havells / Gloster / Universal / Fort Gloster Industries Ltd./ Indian Cable Co. / Asian Cables Corporation Ltd. 150 Sqmm size 3.5 core

LT COPPER CABLE: Supply, erection, testing and commissioning of is marked PVC Copper insulated and sheathed 3.5 core circular flexible wire 1100 volts (3.5 core x 50 sqm) along with all accessories like thimble lugs etc for motors as per entire satisfaction of Engineer-in-charge complete in all respect. Make: Indian Cables Ltd./ Finolex / Havells / Polycab / RR Cables / CAPP / Gloster / Universal / Fort Gloster Industries Ltd./ Asian Cables Corporation Ltd. 50sqmm 3.5 core

Providing and fixing Meter, Cable and other relevant materials including approval from DHBVN and PHED as per norms for arrangement to transfer the solar power to DHBVN complete in all respect as per satisfaction of Engineer-in-Charge.

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 100 mm

Providing and fixing of Zero velocity valve for contrlling water Hammer of IVC/VAG/Kirloskar make of PN 1.6 rating, including, carriage, loading and unloading and fixing, complete in all respect to the satisfaction of the Engineer-in-Charge . 200mm

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) ON incomming rising main 80 mm

Providing and installing Raw Water Horizontal Centrifugal pumping sets 1500 RPM with TEFC Electic motor, base plate, coupling guard, foundation bolt complete as per relevant IS code of capacity 3500LPM 85 BHP 65mtr Head

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) 400mm

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) 450mm

Providing and fixing Electromagnetic type flow meter suitable to measure discharge 50 cum/hr. to 160 cum/hr. with electronic display unit having data logging facility and data downloading hand held computer with neccssary software with all required items such as flexible adaptors,rubbering/gesket,nut bolts,MS fabricated expanders/reducers,wall mounted display including providing sun shade/rain shade,under ground cabling from the meter with G.I.Pipe protection,power connection, panel board earthing etc,as per specification and direction of Engineer-in charge complete in all respects.(make:-ABB,Crohnemarsal, EandH, Siemens, Ultra Sonic) 500mm

Providing and installing Raw Water Horizontal Centrifugal pumping sets 1500 RPM with TEFC Electic motor, base plate, coupling guard, foundation bolt complete as per relevant IS code of capacity. 1150 LPM 7.5 BHP 12.50M HEAD

`Supply, erection, testing and commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of suitable size having following items For 2 no Pumping Sets of 3500 LPM 65 m Head 85 BHP a) Main switch suitable amp. 2 No. (LandT Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d), SPP = 1 No. of approved make e) Motor starter, Star delta for 3500 LPM x 65 m Head = 6 Nos. (LandT Siemens, ABB) f) VSS 1 No. and ASS 2 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)`

Design and construction of automated PLC controlled 2.0 MLD Scada based water treatment plant including interconnecting DI pipe from raw water pump to inlet box of WTP, CWT and Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and all other civil / mechanical / electric installations complete in all respects as per DNIT (Sluice valves of make IVC/VAG) 2.00 MLD CAPACITY.

Laying of D.I. Pipe line By Tranchless Technology. in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstruction suitable for MS casing pipe of size complete for 800 mm i/d MS Pipe 10mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy Hydraulic Crane, Jacking Machine and other necessary equipment HorizontalBoring/ Excavation. 2.Providing and Inserting of 800mm i/d M.S. casing pipe 10 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Inserting of 450mm i/d DI K9 Pipe and testing complete in all respect. 4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 800mm i/d MS casing pipe of size complete for 450 mm D.I. pipe 5.Excavation for receiving pit of size 6m x 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects. Trench for 450mm i/d

Laying of D.I. Pipe line By Tranchless Technology. in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstruction suitable for MS casing pipe of size complete for 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy Hydraulic Crane, Jacking Machine and other necessary equipment HorizontalBoring/ Excavation. 2.Providing and Inserting of 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Inserting of 200mm i/d DI K9 Pipe and testing complete in all respect. 4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe of size complete for 200 mm D.I. pipe 5.Excavation for receiving pit of size 6m x 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects. Trench for 200mm i/d

Laying of D.I. Pipe line By Tranchless Technology. in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstruction suitable for MS casing pipe of size complete for 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy Hydraulic Crane, Jacking Machine and other necessary equipment HorizontalBoring/ Excavation. 2.Providing and Inserting of 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Inserting of 150mm i/d DI K9 Pipe and testing complete in all respect. 4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe of size complete for 150 mm D.I. pipe 5.Excavation for receiving pit of size 6m x 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects. Trench for 150mm i/d

Laying of D.I. Pipe line By Tranchless Technology. in normal soil condition but not rock/ bolder/any undergound utilities like foundation Road, Drain coming in alingment or other underground obstruction suitable for MS casing pipe of size complete for 350 mm i/d MS Pipe 8mm thick casing pipe. consisting with:- 1.Machinery on hire basis, Labour Heavy Hydraulic Crane, Jacking Machine and other necessary equipment HorizontalBoring/ Excavation. 2.Providing and Inserting of 350mm i/d M.S. casing pipe 8 mm thick(Fe-330 grade)Fabricated as per IS 3589 of 1991 from steel plates confirming to IS:-2062 including cutting, beveling, grinding and jointing with radiographically welding of pipe as per IS- 1182 and testing complete in all respect. 3.Providing and Inserting of 100mm i/d DI K9 Pipe and testing complete in all respect. 4.Providing and Fixing of MS Spacer at a distnce of 2 Mtrs apart to avoid contract of casing pipe and carrier pipes complete - For 350mm i/d MS casing pipe of size complete for 100 mm D.I. pipe 5.Excavation for receiving pit of size 6m x 2.50 m x 4 m normal excavation for laying of casing pipe and laying of sewer pipe complete to satisfaction of Engineer-in-change. 6.Both side Plugs :-Concrete block 1:1.5:3 on both ends to plug the angular space between casing and carrier pipe complete in all respects. Trench for 100mm i/d

Providing and installing Raw Water Horizontal Centrifugal pumping sets 1500 RPM with TEFC Electic motor, base plate, coupling guard, foundation bolt complete as per relevant IS code of capacity 3400LPM 65 BHP 50mtr Head

Supply, erection, testing and commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of suitable size having following items For 2 no Pumping Sets of 3400 LPM 50 m Head 65 BHP a) Main switch suitable amp. 2 No. (LandT Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ LandT) c) Digital Multi function meter = 1 No. d), SPP = 1 No. of approved make e) Motor starter, Star delta for 3400 LPM x 50 m Head = 3 Nos. (LandT Siemens, ABB f) VSS 1 No. and ASS 2 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each)`

Operation and maintenance for the complete scope of work mention in the DNIT (Disinfection material supplied by the PHED) as per Schedule-IV for a period of 5 years after 12 months during defect liability period and 3 months trial run period (will be charged to the A/ Mtc. Estimate) Operation and maintenance during defect liability period (Operation only)

Operation and Maintenance during 1st year after defect liability period year

Operation and Maintenance during 2nd year

Operation and Maintenance during 3rd year

Operation and Maintenance during 4th year

Operation and Maintenance during 5th year