Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 3,18,000Document Cost
₹ 15,000Tender Fee
₹ 1,180
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HBC_111515_1Bid Award Id
ViewTender No
2019/HPHC/DEC-28/ 44Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Clearing grass and removal of the rubbish upto distance of outside the periphery of the area cleared. (HSR 6.27)(CP 370%)
2324.82
-
21.45
Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth. (HSR 10.26) (CP450%)
15.09
-
300.2
Cement concrete 1 :8:16 with stone agg 40 mm nominal size in foundation and plinth. (HSR10.28)(CP450%)
3.62
-
318.65
Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.32) (CP 450%)
20.87
-
348.25
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.39)(CP 450%)
64.54
-
403.1
Cement concrete 1 : 8 : 16 with stone aggragate 40 mm nominal size in first storey upto 4 metres above plinth level. (HSR 10.46) ( CP 450%)
5.91
-
324.9
2nd storey
3.66
-
327.75
3rd storey
7.6
-
330
4th storey
3.17
-
332.55
Pre-cast cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size in Kerbs and the like items, finished smooth with 6 mm thick cement plaster 1:3 on exposed surface indluding from work, placing and fixing in position, complete at the ground level or in first storey. (HSR 10.77+10.95) (CP 450%)
4.48
-
1029.4
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work but excluding steel-reinforcement centring and shuttering in foundation and plinth. (HSR 10.79+10.95) (CP 450%)
2.76
-
712.7
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.81+10.95)(C.P 450%) 1st storey
2.57
-
1034.6
2nd storey
1.94
-
1041.9
3rd storey
1.41
-
1049.2
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects. (HSR 10.82+10.95) (C.P 450%) 1st storey
68.27
-
1084.8
2nd storey
51.63
-
1092.1
3rd storey
48.8
-
1099.4
4th storey
6.72
-
1106.7
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR 10.86+10.95(a)) (CP 450%) 1st storey
107.18
-
1188.75
2nd storey
41.62
-
1196.05
3rd storey
38.95
-
1203.35
4th storey
9.87
-
1210.65
Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls 10-20cm thickness straight and curved excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR 10.87+10.95(a)) (CP 450%)
38.32
-
1486.9
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by Item Nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR10.89+10.95 a) (C.P450%)
0.6
-
1708.95
2nd storey
3.54
-
1716.25
3rd storey
0.86
-
1723.55
4th storey
3.69
-
1730.85
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but. (HSR 10.90+10.95(a)) (CP 450%)
101.7
-
774
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132 + 10.95a) (CP 450%)
72.46
-
729.3
First class brick work laid n cement sand mortar 1:6 in foundation and plinth. (HSR 11.2)(CP 600%)
33.14
-
393.45
First class brick work laid n cement sand mortar 1:4 . (HSR 11.4)(CP 600%)
30.99
-
424.6
First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinthlevel. (HSR 11.7) (CP 600%) 4th Storey
3.4
-
439.2
5th Storey
2.94
-
447.45
First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR 11.9) (CP 600%)
68.76
-
445.6
11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth. (HSR 11.47) (CP 600%)
110.02
-
52.7
11.43 cm thick brick wall laid in cement sand mortar 1:4 in super structure. (HSR 11.48) (CP 600%)
5.89
-
55.1
2nd storey
11.7
-
56.05
3rd storey
14.83
-
57
4th storey
24.34
-
57.95
Dressing, chamfering of bricks to required Shape in masonry work. (HSR 11.81)(CP 600%) (Labour Rate)
800
-
73.75
Providig and fixing factory manufactured jali of reinforced cement coarse sand and 10 mm and down gauge bajri in the ratio of 1:1:2 with 8 mm dia for steel outer frame of the jali will be 50 mm wide and 25 mm wide and 25 mm thick with smooth fiish as per design approved by the Engineer-in-Charge including fixig in position up to any height with cement sand mortar 1:4 complete i all respect (HSR 11.103) (CP 0%)
124.58
-
650
Providing and Laying Autoclaved Aerated (cellular) concrete light weight blocks (As per IS :2185, Part 3) hving density of 550 to 650 kg/m3 and compressive strength of 4.0 N/mm2, masonry in non load bearing walls lusing 100 mm thick AAC block complete in all respect. (ii) with polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstructure (HSR 11.104)(CP 0%) ii) With polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstructure. 1st Storey
68.87
-
480.15
2nd Storey
78.8
-
486.8
3rd Storey
130.36
-
493.45
Providing and Laying Autoclaved Aerated (cellular) concrete light weight blocks (As per IS :2185, Part 3) having density of 550 to 650 kg/m3 and compressive strenght of 4.0 N/mm2 masonary in non load bearing wall lsuing more than 100 mm thick AAC Block complete in all respect. (ii) with polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstucture. (HSR 11.105) (CP 0%) ii) With polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstructure. 1st Storey
96.14
-
4129
2nd Storey
97.53
-
4186.75
3rd Storey
98.14
-
4244.5
4th Storey
46.48
-
4302.25
5th Storey
3
-
4360
Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13) (CP 600%) Note- Polythene sheet instead of bitumen will not be used 3rd Storey
353.23
-
54.95
4th Storey
26.83
-
55.95
Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16. (HSR 13.50) (CP 240%)
10
-
12.3
Cement concrete 1:1.1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) (CP 240%) 2nd storey
19.2
-
6.03
3rd storey
107.34
-
6.03
4th storey
22.25
-
6.03
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. (HSR 13.89) (CP 20%) a) 100 mm
121.92
-
182
Providing and fixing PVC bend ISI mark (HSR 13.90)(CP 20%). a) 100 mm
20
-
97.4
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1) (CP 400%)
461.37
-
36.95
Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. (HSR 14.4) (CP 400%) 2nd Storey
372.13
-
15.65
3rd Storey
597.91
-
15.95
Conglomerate floor 25 mm thick cement concrete topping 1:2:4 (HSR 14.8)(CP 400%) 1st storey
18.44
-
22.4
2nd storey
7.15
-
22.7
3rd Storey
16.93
-
23
4th Storey
7.43
-
23.3
Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (HSR14.45 + Note ) (CP 400%)
87.48
-
111.48
Kota stone flooring minimum 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62)(CP 250%) Note :- i) Single piece of stone to be used in steps of stair. ii) Size of one piece should not be less than 22''x22'' for flooring. iii) Kotah stone with spacer joint 1'' wide duly finished with marble chips in white cement. iv) No extra payment will be made on behalf of above note i), ii) & iii). 1st Storey
258.17
-
201.95
2nd Storey
145.37
-
202.25
3rd Storey
106.28
-
202.55
Kota stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66) (CP 250%) Note - Only single piece of kota stone for treads and risers 1st Storey
13.99
-
237
2nd Storey
13.52
-
237.3
3rd Storey
10.37
-
237.6
Providing and fixing vitrified tiles of size 600x 600mm of approved make in flooring laid in any pattern as spcefied over base of 20mm thick cement coarse sand mortar 1:3 and jointed with while cement slurry mixed with pigment to match the shade to tiles. (HSR 14.89)(CP -15%) NOTE:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO.
459.23
-
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to matyh the shade to tiles. NOTE:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO. (HSR 14.90)(CP -15%)
43.31
-
929.8
Providing & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles Note:- Tile should be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI,ORIENT, JOHNSONS & RAK. (HSR 14.91)(CP -15%)
60.22
-
624
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92 b) (CP 0%) b) Size of ceramic glazed tiles 300mm X 450mm
309.97
-
648.15
Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The sample shall be got approved from Engineer-in-charge for all heights/storey. (HSR 14.96) (CP 0%)
177.84
-
1281
12 mm thick cement plaster 1:2 cemented on plaster 1 mm thick (HSR15.3+15.75) (CP 500%) 1st storey
117.88
-
20.85
12 mm thick cement plaster 1:4 (HSR15.5) (CP 500%) 1st storey
762.41
-
12.7
2nd Storey
387.07
-
-
3rd Storey
387.05
-
-
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. (HSR 15.10) (CP 500%) 1st Storey
382.23
-
15.65
4th storey
731.29
-
16.19
5th storey
15.68
-
16.37
10 mm thick cement plaster 1:4 (HSR 15.52) (CP 500%) (under side of ceiling) 1st Storey
445.62
-
12.65
2nd Storey
301.56
-
12.83
3rd Storey
296.84
-
13.01
4th Storey
25.55
-
13.19
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1) (CP 230%)
387.65
-
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2) (CP 230%)
387.65
-
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)(CP 230%)
742.44
-
9.4
Applying priming coat with metal primer on New steel or iron work including preparation of surface. (HSR 16.9)(CP 230%)
354.79
-
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats including priming coat on new work. (HSR 16.58)(CP 230%)
3793.76
-
9.1
Providing two coats of exterior acrylic emulsion paint. (HSR 16.79) (CP 0%) 1st quality
3511.44
-
48.75
Providing & applying two coats of white cement based putty over plusted surface and grinding the surface smooth with sand paper to get an even and smooth finish including and carriage of all material, labour charges, scaffolding, sundries etc complete in alll repect (JK/Birla make) (HSR 16.81) (CP 230%)
7349.96
-
11.35
Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- (HSR 17.82)( CP 300%) I.S.I designation No. II (side of door 701 mm to 850 mm)
21
-
204.4
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (HSR 17.93) (CP 165%) (Less Note 17.18(i) 25 mm thick
61.89
-
387.15
35 mm thick
99.63
-
436.15
Providing & fixing aluminium work for done doors, windows, ventilators and partitions sections/appropriate Z sections and other sections of approved make conforning to IS;733 and IS;1285 fixed with rawel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top bottom, and sides with required neoprane felt etc. aluminium sections shall be smooth, rust free straight mitered and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/paneling CP brass/ stainless steel screws, etc, complete shutters of doors windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprane gasket required including Aluminium fitting. (HSR 17.96) + note (CP 15%)
834.5
-
268.7
Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/neiprene gasket etc. complete. (HSR 17.98) (CP 15%) (a) with float glass panes of 5mm thickness.
45.15
-
700
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12) (CP 500%)
58.47
-
1040.35
Cold twisted deformed (ribbed/TOR steel) bars for RCC works, where not included in the complete rate of RCC including bending, binding and placing in positon complete. (HSR 18.22) (CP 500%)
832.22
-
927.05
Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30) (CP 500%) b) glass panes 4 mm thick, exceeding 40 sq dm areas.
55.88
-
115.4
Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:- (HSR 18.34) (CP 500%) (d) Door and window frame of size 114 mm X 50 mm with 40 mm wide single rebate
355.01
-
69.75
(b) Door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate
168.63
-
58.6
(c) Door and window frame of size 127 mm X 50 mm with 40 mm wide double rebate.
515.36
-
76.8
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. (HSR 24.1) (CP 370%)
475.78
-
92.45
Dismentaling
-
-
-
Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing. (HSR 8.5) (CP 550%) b) In Cement
346.14
-
35.6
Dismantling Concrete. (HSR 8.6) (CP 550%) e) Reinforced cement concrete with cleaning and straghtening and cutting of bars if required.
100.12
-
108.05
Dismantling Roofing (HSR 8.8) (CP 550%) b) b) second class mud roofing with brick tiles, precast C.C. tiles or stone slabs.
719.96
-
2.7
Removing doors and windows (wooden and steel) together with the Dismantling of walls:- (HSR 8.17) (CP 550%) a) doors
40
-
6.25
b) Window
30
-
4.15
Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm Thick including concrete base. (HSR 8.25) (CP 550%)
331.96
-
5.75
Disposal of Malba/Rabish from site lead 10km and loading/un-loading. (HSR 4.1+5.2)
176.23
-
21.65
TOTAL CIVIL WORK (HSR+CP)
-
-
-
Recovery of Material for Old Houses (Detail attached)
1
-
543487
G.TOTAL
-
-
-
Note:- Stone aggregate and coarse sand of red colour will not be used at site.
-
-
-
CIVIL WORK DSR/NS
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR-8.2 ii) Granite of any colour and shade b) Area of slab over 0.50 sqm
38.99
-
3113.3
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. (Powder Coated) DSR-9.96 i) 300x16 mm
2
-
212.45
ii) 250x16 mm
32
-
189.2
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. (Powder Coated) DSR-9.97 iii) 200x10 mm
92
-
76.15
iv) 150x10 mm
72
-
64.3
v) 100x10 mm
111
-
49.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (Powder Coated) DSR-9.100 i) 125 mm
140
-
51.1
ii) 100 mm
186
-
45.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR-9.101) ii) Twin rubber stopper
70
-
38
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR-9.114) ii) Double strip (horizontal type)
35
-
21.5
Providing and fixing precoated galvanised iron profile sheets (size,shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. . DSR- 12.50
167.22
-
550
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer. (DSR-13.43)
3511.44
-
36.95
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete. DSR-13.78
2695.66
-
217.35
Providing and Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density and Supplying and stacking at site. ii) 63 mm to 45 mm size stone aggregate. DSR-16.4+16.3 (75mm Compacted)
36.23
-
1898.4
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). DSR-16.53
192.93
-
255
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. DSR-16.78 i) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
72.96
-
2089.7
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed bywater curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured." DSR-22.6
75.11
-
395
Extra for Granite polish on kota stone flooring.
403.71
-
49.5
Earth filling with the earth brought from outside the campus irrespective of any lead including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge.
787.64
-
186
Providing and fixing Powder Coated aluminium fittings for door and windows shutters with screws of required size complete in all respect. Sliding Bolts - 150mm x 12mm
61
-
120
I-Hook
93
-
30
Providing and fixing stainless steel wire mesh jali of 22 gauge and 316 grade in aluminium doors and windows in aluminium section excluding the cost of beadings channels etc same will be paid in aluminium work but including labour for fixing the same complete in all respect.
88.88
-
800
Providing and Fixing of 25 mm thick finished red sand stone both side slightly rounded for partition and shelves in C B
52.19
-
754
Providing and fixing Stainless steel 25mm oval shape hanging rod heavy quality including S.S wall to wall clamp in cupboard fixing in position complete in all respect.
13.07
-
295
Curtain Rod 25 mm of S.S. with 304 grade all Material Wall to wall Latoo complete in all respect.
71.01
-
175
Making Chases in brickwork for providing skirting flush with the plaster.
1153.14
-
26.45
Extra labour for plaster for any type of corbelling in RCC at top of parapet complete in all respect.
127.71
-
183
Antitermite Treatment (Pre-construction Work). Providing and injecting chemical emulsion for Anti termite with using Imidacloprid @ 0.075% concentration PCI solution through M/s Pest Control (India) Pvt. Ltd. (10 years warranty).
549.66
-
110
Making Nosing (moulding) with granite polish of the granite stone complete as per design and drawing.
109.19
-
128
Cutting groove in cement concrete work in road/taxi track of size 5mm x 50mm. Complete in all respect.
319.5
-
28
Finishing and laid cement concrete with vaccum dewatering system surface vibrator and fine trowel complete in all respect.
475.78
-
61.75
Providing and fixing mumty door consisting of mild steel angle iron frame 35x25x5mm thick cross brass 20x5mm @ 4nos at each side ) and two nos M S flats 50x6mm and covered with M S sheet 16 gauge including locking arrangement ( with sliding bolt and T bolt)
92
-
74.35
Providing and fixing 4mm thick Acrylic sheet on toilet flush door etc complete in all respect
16.72
-
1066
Providing and fixing PVC false ceiling with 7 mm thick 250 mm wide of approved colour fixed on 20 mm x 20 mm of 14 gauge M.S Square tube including cost of screws angles clead, rawl plugs with taping and painting etc complete in all respect as approved by the Engineer-in- Charge
111.24
-
1151
Providing & fixing M.S. Rod fully threaded with nut bolt and washers in aluminium section window door shutters complete in all respects.
509.62
-
136
Providing and fixing of 5 Pin Stainless Steel Hanger in Bathroom including all fitting complete in all respects.
15
-
76
Making and cutting and hole 100mm to 125mm dia in RCC through core cuter machine complete in all respect
21
-
689.6
Providing and fixing of 3'-0" high stainless steel railing as per approved drawing and design consisting of members of S.S. 304 grade with 50mm (OD) hand rail and balustrade, 16mm (OD) mid rails, 100mm dia x 8mm thick base plate directly mounted on floor using fisher make anchors, complete in all respect.
244.4
-
532
Providing and planting grassy lawns including ploughing and dragging with suhaga breaking of clods removal of rubbish dressing and supplying Barmuda grass carpet at 15 cm apart i/c supplying and spreading of farmyard manure at the rate o f 0 .18cum per 100 sqm fertilizer and watering with six month maintenance after completion of work
1187.85
-
43.05
Providing and Fixing Chicken Mesh Jali (app 2.0 Kg per 200 Sqft) with nail and washer on wall, columns and beam etc before applying plaster to avoid cracks at junctions and intermediate of wall complete in all respects.
2753.03
-
42
Providing and fixing of RCC bench without arms having size 1500x1000x620 casted with CC of M-30 Grade installed with nut bolt of GI metal complete in all respects.
10
-
5942
Providing and Planting different type of Plants including digging planting watering manure fertilizing etc, complete in all respect. Gulmohar (Height 10'-0'')
10
-
342.43
Black Ficus (Height 3'-0'')
20
-
96.92
Bottle Palm (Height 13'-0'')
25
-
2247.78
Bottle Brush (Height 12'-0'')
10
-
342.43
Sita Ashoka (Height 10'-0'')
6
-
264.51
Champa (Height 3'-0'')
30
-
169.28
Chandni Double (Height 4'-0'')
25
-
144.6
Cycus
10
-
1118.64
Enermy Hedge (1'-0")
1500
-
20
TOTAL DSR/NS CIVIL WORK
-
-
-
HSR PUBLIC HEALTH
-
-
-
Excavation for pipelines running under pressureIn trenches and pits, in open areas, where disposal,Of surplus earth is done alongwith the alignment Including trimming & dressing sides, leveling of beds of trenches to Correct grade, cutting joint holes,cutting trees and bushes, etc.,Refilling consolidation and watering of refill in 15 cm layers and Restoration of unmetalled or unpaved surface to ITS ORIGINAL CONDITION, including the cost of dewatering of rain Water, diversion of traffic, night signals, fixing caution boards, watching, Fencing etc., and outside the town in ORDINARY SOIL:- (HSR 6.8)(CP 370%) a) Without timbering and shorting upto 1.5 metres depth
98.48
-
932
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41) (CP450%)
18.29
-
615.6
Cement concrete 1 : 1.5 : 3 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41+10.95a) (CP450%)
2.24
-
702.5
Earth work for digging well in dry excavation from ground level upto the level where well kerb is placed including depositing spoil within 60 metres radius, and filling space outside the well after completion- (HSR 22.1) (CP 500%) a) from N.S level to 1.5 m depth
46.74
-
897.5
b) exceeding 1.5 metres but upto 4.5 metres depth
71.72
-
1097
Cutting holes upto 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 28.24) (CP 300%) a)11: 43 cm thickness of walls
5
-
14
b)22:86 cm thickness of walls
13
-
20.35
Cutting holes upto 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing complete in all respect. (HSR 28.26)(CP 300%) c) 150mm thickness of floor or roof
-
-
-
supplying GI PIPES CLASS B MARKED WITH IS:1239 IN 3.05 M LENGTH, their threading and welding with flanges ( heavy duty) on both sides, jointing with nuts and bolts marked with IS:1363, rubber gaskets marked with IS:638 JOINTING WITH PUM PING MACHINERY AND LOWERING INTO TUBEWELLS and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer 100 mm i/d (HSR 28.52) (CP 10%)
-
-
-
CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design. (HSR 29.84) (CP 450%)
-
-
-
b) Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame light duty single seal Pattern 1 weighing 38 kg with C.C. topping )
2
-
582
c) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping )
8
-
690
Extra over for 0.30 mtr depth of inspection chamber (HSR 29.85) (CP 450%) b) 450 mm x 600 mm
2
-
103
c) 600 mm x 900 mm
8
-
139
Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction of Engineer-in-Charge. (HSR 29.94) (CP5%) Type:- Extra Heavy Duty Set (HD-20)-560MM Clear Opening
4
-
1100
Providing salt glazed stoneware pipe grade in standard length of 600 mm each pipe marked with IS 651 and their lowering cutting jointing and testing as described in Hsr item no 29.38 29.39 29.40 i/c the cost of jointing material as well as carriage loading unloading stacking handling rehandling etc complete in all respect to the satisfaction of the EIC. (HSR 29.95) (CP5%) a) 150mm
64
-
199
b) 200mm
24.38
-
253
PROVIDING AND FIXING IN POSITION BESTINDIA MAKE LARGE FLAT BACK or Angular lipped from Urinal 610 MM HIGH consisting of: (HSR 30.25) (CP 340%) Singal Urinal (i) White
4
-
1014
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC. (HSR 30.41(a)(CP 340%) (iv) Size 550 mm x 400 mm with one no. tap
4
-
407
Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) (HSR 30.44) (CP 340%) i) White
4
-
279
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D INLET. (HSR 30.66) (CP 340%) c) C.P brass with revolving joint.
5
-
122
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.68) ( CP 340%) 25 MM DIA C.P BRASS ADJUSTABLE 600 mm long.
7
-
61
C.P brass towel ring.
8
-
53.5
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (HSR 30.70) (CP 340%) C.P BRASS Soap dish small
8
-
46.5
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Long nose (HSR 30.75) (CP 340%) a) Bib cock long body
20
-
116
c) Bib cock
9
-
100
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) (HSR 30.76) (CP 340%) 15 MM STOP COCK Stop cock male and female end
46
-
101
Concealed stop cock with flange.
7
-
130
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. (HSR 30.93© (CP 300%) 15mm alkahene pipe inlet connection
32
-
10.5
CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION (HSR 30.95(c)(CP 340%) c) Size 75 mm x 50 mm
62.41
-
4
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS (HSR 30.110(b)(CP 340%) (b) WITH PLASTIC BALL (ii) 20 mm internal diameter
10
-
48
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. (HSR 30.114 (c) (CP340%) c) 150 mm internal diameter S.W. gully trap
10
-
182
Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Enginer in charge. (HSR 30.119) (CP 0%) 500 ltrs.
5
-
2682
1000 ltrs.
5
-
5263
TOTAL P.H. WORK (HSR+CP)
-
-
-
P.H. WORK DSR/NS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR-17.1
3
-
3494.2
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board 610x460 mm bowl depth 200 mm. DSR-17.10
2
-
2186.25
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32mm dia DSR-17.28
24
-
75.6
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. DSR-17.78
7
-
9685.7
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. DSR-18.10 a)15 mm dia
112.63
-
186.4
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. DSR-18.12 c) 20 mm i/d of pipe line
310.2
-
186.3
d) 32 mm i/d of pipe line
94.49
-
247.4
e) 40 mm i/d of pipe line
60.96
-
301.05
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality (screwed end) DSR- 18.17 20mm i/d pipe
15
-
396.55
32mm i/d pipe
10
-
500.75
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). DSR-18.46 b) 20mm dia
10
-
170.95
c) 32 mm dia
5
-
240.65
Providing and fixing of G.I. Hooks for G.I. Pipes etc.
150
-
10
Pdg. & fixing SWR PVC pipe classic type ‘B’ and specials ISI marked and rubber ring with solvent complete in all respect. a) 110mm
110.03
-
315.95
b) 90mm
100.58
-
261.3
Special for 110 mm dia pipe (UNIC/VCO/SVW) Cowel
5
-
29.95
PVC clamp
15
-
28.8
Socket
30
-
87
bend
25
-
106.85
P-Trap
8
-
200
Tee
20
-
148.15
single junction with door
35
-
166
Special for 90 mm dia pipe (UNIC/VCO/SVW) Cowel
6
-
25.4
PVC clamp
30
-
28
Socket
20
-
72.9
Bend
20
-
90.95
Tee
20
-
135
Single junction with door
10
-
138.95
Nani Trap
18
-
200
Providing and fixing C.P. jali with frame complete in all respect.
24
-
77
Providing and Fixing in position 5.0 mm thick bevelled edge mirror fixed in position with 6 nos chromium plated S.S spacers including holes in mirror complete in all respect.
4.18
-
2863
Providng and fixing in position G I tank nipple complete in all respect. a) 20 mm dia
10
-
60
b) 32 mm dia
10
-
175
Pdg. & fixing SWR PVC Floor Trap type ‘B’ and specials ISI marked including fitting joint solvent mixture i/c rubber ring complete in all respect. Size 100mm dia with 75mm outlet
3
-
273
Providing and fixing 15 mm dia brass ferrule by drilling and tapping upto 100 mm i/d G.I pipe line complete in all respect
15
-
362
Providing and fixing position 15mm dia 50mm long C.P. extension nipple.
10
-
41.4
Pdg. and fixing in position C.P. jet spray all necessary fittings complete in all respect.
10
-
122
Providing and fixing of under counter wash basin of size 550x405mm of camry 1034 complete in fixed in position.
4
-
2318
Providing and fixing waste coupling 32mm size full thread with 80mm height with complete fitting of Jaquar make Cat No. AlD-705.
7
-
461
Providing & placing in horizontal layers filtering media screened, washed and cleaned boulder of 50mm to 200mm size upto 4.5 mt. Depth, complete.
8.49
-
2599
Providing & placing in horizontal layers filtering media screened, washed and cleaned Graver of 20mm to 25mm size upto 4.5 mt. Depth, complete.
3.96
-
1703
Providing & placing in horizontal layers filtering media screened, washed and cleaned Graver of 5mm to 10mm size upto 4.5 mt. Depth, complete.
12.85
-
3068
Providing & placing in horizontal layers filtering media screened, washed and cleaned coarse sand of 1.5mm to 2mm size upto 4.5 mt. Depth, complete.
3.96
-
2130
Providing, Jointing & Lowering 150m i/d slotted PVC pipe, IS:4985, 10kg/sqcm pressure with 20% opening & 3mm slots (As per strata), complete.
20.68
-
763
Boring of 450mm i/d hole in ground for Rain Water harvesting purpose upto 70mt. Depth complete.
60.96
-
713
Providing and jointing & laying of 200mm i/d PVC pipe, IS:4985, 10kg/sqcm pressure, complete.
31.43
-
832
Providing & fixing of 200mm i/d PVC bend.
2
-
350
Providing, jointing & Lowering 150m i/d PVC pipe, IS:4985, 10kg/sqcm pressure upto 70mt. Depth, complete.
43.96
-
713
Providing and Fixing PVC grating cap for 150mm i/d pipe complete.
1
-
100
TOTAL DSR/NS P.H. WORK
-
-
-
E.I. (HSR) PART
-
-
-
Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. ( HSR 31.12 @ 60%) 100 amp.to 220 amp.415 V,10 KA 3-phase.
7
-
4246
Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. ( HSR 31.17 @ 30%) Miniature circuit breakers of 9 KA breaking capacity. SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.
102
-
95
SPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.
1
-
240
Supply and erection of Fittings and Accessories. ( HSR 31.18 @ 200%) Bakelite angle / straight button holder large size.
5
-
6.2
Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job. .
47
-
26.3
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. ( HSR 31.21 @ 350%) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. PVC pipe 80 mm dia.
80
-
42
Earthing ( HSR 31.22 @ 350%) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .
2
-
378
Extra for using salt and charcoal / coke for pipe earth electrode as required.
2
-
125
Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.
6
-
453
Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) comlete as equired.
1
-
1149
Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
7
-
186
Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .
3.9
-
155
Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .
27.3
-
65.1
Pdg. and fixing 25 mm x 5 mm copper strip on surface or in recess for connections etc. as required with all labour and material.
10
-
117
Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.
20
-
20.3
Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .
30
-
24.5
Pdg. and fixing 4.00 mm dia G.I.wire on surface or in recess for loop earthing as required .
35
-
3.4
Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . (HSR 31.28 @ 140%) 25 Sq. mm 4 Core Ard. Cable .
200
-
56.3
95 Sq. mm 3.5 Core ARD.Cable .
120
-
121.1
Supply and erection of suitable compression type brass cable glands for underground Cable. ( 31.28 @ 140%) 25 Sqmm to 50 Sqmm Cable 2 to 4 Core.
24
-
16.8
70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .
1
-
22.5
Street Light. ( HSR 31.30@ 270%) Supply and erection of weather proof M.S.Box of size 20 cm x 15 cm x 10 cm. covered with 3.00 mm thick M.S.sheet hinged cover, locking arrangemrnt , housed in wall , including the cost of 1 no. 16 amp. 415 volts kit-kat and 2 nos. 63 amp. 415 volts neutral links fixed on hard wood board in the M.S.Box including painting and necessary connections .
7
-
85
Supply and erection of PVC unsheathed copper conductor cable single core 1100 volts grade in pipe of suitable size excluding cost and erection of pipe ( HSR 31.40 @ 10%) Size 1.5 sqmm ( 3/0.81 )
3283
-
10.2
Size 4 sqmm ( 7/0.85 )
268
-
24.5
Size 6 sqmm ( 7/1.05 )
157
-
35.6
Supply and erection of Double door sheet steel enclosure distribution boards suitable for MCB's & ELCB's recessed in wall including bonding to earth complete with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. ( HSR 31.41 @ 10%) 8-way , SP&N ( Horizontal)
1
-
870
8-way , TP&N ( Verticle) (8+24)
3
-
4890
Supply and erection of MS Saddle and clamps duly galvanised , on wall / RCC parapit for fixing underground cable at a distance of 0.60 metre center to center fixed by means of rawl plug including the cost of all labour and material required to complete the job in all respect and upto entire satisfaction of the Engineer-in-charge of work. ( HSR 31.48@ 10%)
50
-
5
Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. ( HSR 31.56 @ 0%) 10 amp. 1 way switch
37
-
87
10 amp. Socket
37
-
106
Fan Regulator
47
-
397
Call bell Ding-Dong (Monica)
2
-
99
Blanking plate.
21
-
25
Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect. ( HSR 31.57@ 0%) 1 & 2 Modules
27
-
101
6 Modules
1
-
214
Supply and erection of moulded case circuit breaker single pole/4 pole on wall / on existing pedestal including bonding to earth and making necessary connections required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. HSR 31.69@0% Four pole MCCB 300 amp to 400 amp of 50 KA breaking capacity.
1
-
21172
Supply and erection of heavy duty 4 pole ON load changeover / load break switch comprising of switches 63 amp to 400 amp suitable for operation on 415 Volts, 50 HZ AC supply complete with handle assembly having door interlock & padlocking arrangement in existing panel including making necessary connections with petty material required to complete the job. HSR 31.74 @ 0% 300 amp 4 pole ON load change over switch
1
-
17100
Supply and laying of multicore telephone cable conductor of size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/ channel and making necessary connections, complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. ( HSR 31.78 @ 0%) 2 pair telephone wire
300
-
7.94
SITC of Load Bank with digital meter module cost of gigital Amp/Volt meter with selector switch wiring etc. suitable for operation of 240/415 volt AC supply with both side cable allay inter connection & fixing the same in existing MS pedestal complete with all labour & material required to complete the job in all respect HSR 31.74 @ 0% I Load Bank 4 way 400 Amp
1
-
69400
Total HSR + CP
-
-
-
NS Items
-
-
-
Wiring with 1.5 sqmm PVC insulated copper conductor cable in 25 mm dia P.V.C. Conduit pipe, heavy gauge, ISI marked (recessed type) including cost of PVC pipe, modular metal box of suitable size with modular inner & outer face plates,copper wire,switch and sockets(modular type)screws, making necessary connections & testing complete in all respect. (Space for 10 Amp. switch & socket may be kept in main switch boxes and no extra payment will be made for the same) Fan point (i) Medium
34
-
500
(ii) Long Point
13
-
671
Light Point (i) Short
8
-
305
(ii) Medium
81
-
473
(iii) Long
78
-
671
Twin control light point with two way 10 Amp. single pole switch. (ii) Medium
7
-
545
(iii) Long
9
-
782
Call bell point including M.S. Box of size 180 mm x 100 mm x 60 mm deep for call :- a) Long Point
2
-
686
5 Pin 10 AMP plug point including earthing the 3rd pin with 1.50 sqmm copper insulatd earth wire. c) Long Point
31
-
902
5 Pin 20 AMP switch & 16 Amp socket including earthing the 3rd pin with 1.50 Sqmm copper insulated earth wire. (wiring with 4 Sqmm copper wire ) c) Long Point
31
-
1420
S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect. (Recessed Type) (i) Size 25 mm dia
925
-
45
S/E 250mm dia PVC body exhaust fan with louver shutter of suitable size for single phase AC 230 volts 50 Hz, 1210 RPM and capacitor run, complete in all respect. (Model - Ventilair DX in Havell's Make and Brisk AIR in Crompton greaves make)
15
-
1490
Supply and erection of TV socket / RJ-11 Telephone Jack single shutter one module, complete in all respect including making necessary connections and labour etc.
18
-
70
Supply and erection of co-axial TV cable (RG-6) with electrolytic grade solid bare copper conductor, gas injected physical foamed polythylene insulation, screened with laminated aluminium tape & aluminium alloy wire braided, jelly flooded & UV grade PVC jacketed in existing pipe, complete in all respect including making necessary connections and labour etc.
50
-
19
Supply and erection of A.C. Ceiling fan capacitor type, copper wound with double ball bearing complete with capacitor, 300 mm down rod, canopies, shackle, three numbers blades made of aluminium alloy suitable for single phase, A.C. 230 V, 50 HZ supply. (NS item) i) Size 1400 mm sweep (56'' with electronic regulator socket type step wise. Make as per brand list of hphc
47
-
1290
S/E of 4 Pair UTP( Unsheated twiisted pair)CAT 6 cable in existing pipe i/c all labour and petty material required to complete the job in all respect. (NS item)
200
-
22
Supply & Erection of RJ-45 Computer Jack Complete in all respect
9
-
419
Supply & Erection of 20 watt LED 4000K indoor batten type tube light with alumunium extrusion ,4 feet long complete in all respect i/c making necessary connections..Make as per brand list of HPHC
20
-
566
Supply and erection of surface mounting, energy efficient LED 15 watt (app 9'' x 9'') luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same on wall with required material & making necessary connections etc.make as per brand list of HPHC
104
-
1270
S/E of 1400 VA Invertor ( Luminious / Microtek / Sukem make ) suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150 AH Exide tubla rbatteries having warranty of 2 years i/c cost of trolly for batteries complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge of the work. (NS item)
1
-
30475
S/E post top luminaire decorative fitting 1x18 watt make as per brand list of HPHC complete in all respect as per dnit
2
-
3548
S/E of marked propeller type ventilation fan (Ex.Fan) 300 mm 1400 RPM complete in all respect ( Make Havells,Crompton or equilentcomplete in all respect. Metal
1
-
2914
S/E of 50/53/60 watt LED Flood Light IP-65 complete in all respect ( Make as per brand list of HPHC
7
-
4753
Supply and erection of recess/surface mounting, energy efficient LED 36 5700K watt (2' x 2') luminaire, complete with diffuser, HF electronic driver and other material required to complete the job including fixing the same in false ceiling/ on wall with required material & making necessary connections etc. make as per brand list of HPHC
44
-
3112
S/I/T/C of water cooler fully stainless steel body with 150 ltr /hr and 150 ltr storage capacity(USHA/ sidwal/ voltas Make) with copper wound voltage stablizer of 5 kva ,100 up . Mictorteck/ Luminanceand commercial RO system of 40 ltr/ hr capacity(Kent/ Ereka forbs)complete in all respect i/c all labour and petty material. (NS item)
2
-
91900
Supply, installation,testing and commissioning of 1.5 TR high wall mount Split Air-conditioning unit of Hitachi,Mitsubishi, O-General, Daikin Make of 3 star rating to be operated on 220Volts(+) (-) 10% single phase,50 Hz AC supply and consisting of condensing indoor unit, cordless remote,upto 6.00 RMT of hard copper referigerent piping with insulation and cabling between indoor and outdoor unit, copper wound Mictortek/ luminance voltage stablizer 5.00 KVA 100 up wall mount, first charge of R-22 Gas & oil and MS stand.The work should be completed in all respect i/c making repair of wall,floor and roof in origional shape caused by making holes and chases etc. (NS item)
3
-
44700
Supply & Erection of LED TV 40 " fully HD Samsung/Sony make complete in all respect ( NS Items)
1
-
42000
SITC og EPABX system, complete in all respect consisting of following items:- i) EPABX machine equiped with4 trunks, & extensions and expendable type ( Make :- NEC,model-SL 1000)
1
-
23177
ii) Telephone set Model P-tel PT33
11
-
670
iii) Telephone set Model P-Tel PT55
1
-
1228
iv)stablizer CVR-500 VA
1
-
2056
S/E of tag block for terminating telephone cables. The tag block is to be fixed on existing wall with screws etc.b) Size 20 Pair.
1
-
1500
Total N S
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements