Police Housing Corporation Limited Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 4,88,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2019_HBC_89385_1Bid Award Id
ViewTender No
2019/HPHC/JULY-13/ 11Tender Authority
Police Housing Corporation Limited ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth. (HSR 10.26) (CP450%)
18.57
-
300.2
Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.32) (CP 450%)
27.93
-
348.25
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.39)(CP 450%)
104.37
-
403.1
cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41)(CP 450%)
3.11
-
615.6
Cement concrete 1: 1.5 : 3 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41+10.95a)(CP450%)
2.24
-
615.6
Cement concrete 1 : 8 : 16 with brick ballast 40 mm nominal size in first storey upto 4 metres above plinth level. (HSR 10.44) (CP 450%)
28.46
-
306.45
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work but excluding steel-reinforcement centring and shuttering in foundation and plinth. (HSR 10.79+10.95) (CP 450%)
24.01
-
712.7
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. (HSR 10.81+10.95)(C.P 450%) 1st storey
6.73
-
1034.6
2nd storey
1.64
-
1041.9
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects. (HSR 10.82+10.95) (C.P 450%) 1st storey
100.14
-
1084.8
2nd storey
58.63
-
1092.1
3rd storey
5.47
-
1099.4
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR 10.86+10.95(a)) (CP 450%) 1st storey
285.13
-
1188.75
2nd storey
56.77
-
1196.05
3rd storey
3.81
-
1203.35
Cement concrete 1:1½:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls 10-20cm thickness straight and curved excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR 10.87+10.95(a)) (CP 450%)
32.4
-
1486.9
2nd storey
4.46
-
1494.2
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by Item Nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. (HSR10.89+10.95 a) (C.P450%) 2nd storey
3.29
-
1716.25
3rd storey
3.36
-
1723.55
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement but. (HSR 10.90+10.95(a)) (CP 450%)
188.83
-
774
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132 + 10.95a) (CP 450%)
137.73
-
729.3
First class brick work laid n cement sand mortar 1:6 in foundation and plinth. (HSR 11.2)(CP 600%)
93.35
-
393.45
First class brick work laid in cement sand mortar1:5 in foundation and plinth. (HSR 11.3)(CP 600%)
6.02
-
407.6
First class brick work laid n cement sand mortar 1:4 . (HSR 11.4)(CP 600%)
170.02
-
424.6
First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR 11.9) (CP 600%)
210.11
-
445.6
11.43 cm thick brick wall laid in cement mortar 1:4 without reinforcement in foundation and plinth. (HSR 11.47) (CP 600%)
321.55
-
52.7
11.43 cm thick brick wall laid in cement sand mortar 1:4 in super structure. (HSR 11.48) (CP 600%)
117.33
-
55.1
2nd storey
89.13
-
56.05
Dressed or moulded one brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plster 1:4 or pointing. (HSR 11.78) (CP 600%)
146.48
-
7.2
Providig and fixing factory manufactured jali of reinforced cement coarse sand and 10 mm and down gauge bajri in the ratio of 1:1:2 with 8 mm dia for steel outer frame of the jali will be 50 mm wide and 25 mm wide and 25 mm thick with smooth fiish as per design approved by the Engineer-in-Charge including fixig in position up to any height with cement sand mortar 1:4 complete i all respect (HSR 11.103) (CP 0%)
25.6
-
650
Providing and Laying Autoclaved Aerated (cellular) concrete light weight blocks (As per IS :2185, Part 3) having density of 550 to 650 kg/m3 and compressive strenght of 4.0 N/mm2 masonary in non load bearing wall lsuing more than 100 mm thick AAC Block complete in all respect. (ii) with polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstucture. (HSR 11.105) (CP 0%) ii) With polymer modified adhesive of reputed make as approved by Engineer-in-Charge in superstructure. 1st Storey
152.78
-
4129
2nd Storey
105.35
-
-
3rd Storey
49.83
-
-
Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc. (HSR 13.13) (CP 600%) Note- Polythene sheet instead of bitumen will not be used 2nd Storey
415.98
-
53.95
3rd Storey
37.71
-
54.95
Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16. (HSR 13.50) (CP 240%)
9
-
12.3
Cement concrete 1:1.1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) (CP 240%) 2nd storey
139.29
-
6.03
3rd storey
36.04
-
6.03
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. (HSR 13.89) (CP 20%) a) 100 mm
402.72
-
182
b) 150 mm
24.38
-
336.65
Providing and fixing PVC bend ISI mark (HSR 13.90)(CP 20%). a) 100 mm
35
-
97.4
Providing and fixing False Ceiling without grooves with 12mm to 15mm thick, 600 mm X 600 mm best quality mineral fiber tiles of approved make fixed on M.S steel runners frame i/c cost of screw angles cleats, rawal plugs, with taping and painting,etc. complete in all respects as approved by the Engineer-in-charge. (HSR 13.93) (CP 10%)
37.38
-
800
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1) (CP 400%)
611.45
-
36.95
Floating coat of 1.50 mm thick neat cement laid in one operation to the topping. (HSR 14.3) (CP 400%)
46.85
-
3.7
Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping. (HSR 14.4) (CP 400%)
589.95
-
14.65
Conglomerate floor 25 mm thick cement concrete topping 1:2:4 (HSR 14.8)(CP 400%) 1st Storey
309.61
-
22.4
2nd Storey
233.11
-
22.7
Conglomerate floor 50 mm thick cement concrete topping 1:2:4. (HSR 14.10)(CP 400%)
46.85
-
37.6
Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. (HSR14.45 + Note ) (CP 400%)
150.59
-
111.48
Kota stone flooring minimum 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62)(CP 250%) Note :- i) Single piece of stone to be used in steps of stair. ii) Size of one piece should not be less than 22''x22'' for flooring. iii) Kotah stone with spacer joint 1'' wide duly finished with marble chips in white cement. iv) No extra payment will be made on behalf of above note i), ii) & iii). 1st Storey
250.11
-
201.95
2nd Storey
344.05
-
202.25
Kota stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66) (CP 250%) Note - Only single piece of kota stone for treads and risers 1st Storey
19
-
237
2nd Storey
21.38
-
237.3
Providing and fixing vitrified tiles of size 600x 600mm of approved make in flooring laid in any pattern as spcefied over base of 20mm thick cement coarse sand mortar 1:3 and jointed with while cement slurry mixed with pigment to match the shade to tiles. (HSR 14.89)(CP -15%) NOTE:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO.
461.82
-
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to matyh the shade to tiles. NOTE:- Tile shall be of premium quality (first quality) of reputed manufacturer like: NITCO, KAJARIA, SOMANI, ORIENT BELL, JOHNSON, RAK AND SIMPOLO. (HSR 14.90)(CP -15%)
40.98
-
929.8
Providing & fixing ceramic tiles/anti skid tiles of size 400mm x 400mm or above size of approved make in flooring, laid in any pattern as specified over base of 20 mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles Note:- Tile should be of premium quality (first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI,ORIENT, JOHNSONS & RAK. (HSR 14.91)(CP -15%)
79.06
-
624
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. (HSR 14.92 b) (CP 0%) b) Size of ceramic glazed tiles 300mm X 450mm
343.53
-
648.15
Providing and laying Baroda Green marble stone 17mm and above thick flooring included matching the grains of marble slab in any pattern as specified laid over 12mm thick cement sand mortar 1:3 and jointed with white slurry mixed with pigment to match the shade of marble including rubbing and polishing. The sample shall be got approved from Engineer-in-charge for all heights/storey. (HSR 14.96) (CP 0%)
147.48
-
1281
12 mm thick cement plaster 1:2 (HSR15.3+15.75) (CP 500%) 1st storey
117.88
-
20.85
12 mm thick cement plaster 1:4 (HSR15.5) (CP 500%) 1st storey
2295.88
-
12.7
2nd Storey
699.75
-
-
3rd Storey
244.89
-
-
12mm thick cement plaster 1:6. (HSR 15.7) (CP500%) 1st Storey
799.94
-
10.65
2nd Storey
482.33
-
10.83
3rd Storey
24.87
-
11.01
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. (HSR 15.10) (CP 500%) 2nd Storey
1427.78
-
15.83
3rd Storey
286.97
-
16.01
15mm thick cement plaster 1:6 on the rough side of single or half brick wall. (HSR 15.12)(CP 500%) 1st Storey
710
-
13.1
2nd Storey
493.6
-
13.28
3rd Storey
24.87
-
13.46
10 mm thick cement plaster 1:4 (HSR 15.52) (CP 500%) (under side of ceiling) 1st Storey
1118.91
-
12.65
2nd Storey
587.3
-
12.83
3rd Storey
22.39
-
13.01
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1) (CP 230%)
390.26
-
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2) (CP 230%)
390.26
-
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)(CP 230%)
740.93
-
9.4
Applying priming coat with metal primer on New steel or iron work including preparation of surface. (HSR 16.9)(CP 230%)
350.67
-
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats including priming coat on new work. (HSR 16.58)(CP 230%)
4077.15
-
9.1
Providing two coats of exterior acrylic emulsion paint. (HSR 16.79) (CP 0%) 1st quality
4925.25
-
48.75
Providing & applying two coats of white cement based putty over plusted surface and grinding the surface smooth with sand paper to get an even and smooth finish including and carriage of all material, labour charges, scaffolding, sundries etc complete in alll repect (JK/Birla make) (HSR 16.81) (CP 230%)
9002.4
-
11.35
Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- (HSR 17.82)( CP 300%) I.S.I designation No. II (side of door 701 mm to 850 mm)
25
-
204.4
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (HSR 17.93) (CP 165%) (Less Note 17.18(i) 25 mm thick
68.36
-
387.15
35 mm thick
95.04
-
436.15
Providing & fixing aluminium work for done doors, windows, ventilators and partitions sections/appropriate Z sections and other sections of approved make conforning to IS;733 and IS;1285 fixed with rawel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top bottom, and sides with required neoprane felt etc. aluminium sections shall be smooth, rust free straight mitered and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/paneling CP brass/ stainless steel screws, etc, complete shutters of doors windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprane gasket required including Aluminium fitting. (HSR 17.96) + note (CP 15%)
757.76
-
268.7
Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/neiprene gasket etc. complete. (HSR 17.98) (CP 15%) (a) with float glass panes of 5mm thickness.
39.73
-
700
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12) (CP 500%)
66.47
-
1040.35
Stair case railing of 40 mm internal dia G.I pipe class ‘B’ as per I.S. No. 1239 as hand rail using flats and square bars as supporting members and base plate welded as per design specified including cutting, welding rods and complete fixed in position. (HSR 18.13a) (CP 500%)
6.8
-
1157
Cold twisted deformed (ribbed/TOR steel) bars for RCC works, where not included in the complete rate of RCC including bending, binding and placing in positon complete. (HSR 18.22) (CP 500%)
949.91
-
927.05
Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30) (CP 500%) b) glass panes 4 mm thick, exceeding 40 sq dm areas.
110.4
-
115.4
Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:- (HSR 18.34) (CP 500%) (d) Door and window frame of size 114 mm X 50 mm with 40 mm wide single rebate
448.58
-
69.75
(b) Door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate
291.98
-
58.6
(c) Door and window frame of size 127 mm X 50 mm with 40 mm wide double rebate.
652.31
-
76.8
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. (HSR 24.1) (CP 370%)
715.66
-
92.45
PROVIDING AND FIXING IN POSITION M.S. OR HEAVY FLAT IRON CLAMPS made out of M.S flat not less than 5 mm of the approved design for fixing C.I. SOIL WASTE Vent or anti pipes to walls COMPLETE IN ALL RESPECTS INCLUDING CUTTING AND MAKING GOOD THE WALLS AND FLOORS ETC., AND PAINTING. (HSR 30.88) (CP 350%) a) For 100 mm internal diameter pipes
52
-
12.5
TOTAL CIVIL WORK (HSR+CP)
-
-
-
Note:- Stone aggregate and coarse sand of red colour will not be used at site.
-
-
-
CIVIL WORK DSR/NS
-
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. DSR-8.2 ii) Granite of any colour and shade b) Area of slab over 0.50 sqm
40.15
-
3113.3
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. (Powder Coated) DSR-9.96 ii) 250x16 mm
51
-
189.2
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. (Powder Coated) DSR-9.97 iii) 200x10 mm
51
-
76.15
iv) 150x10 mm
137
-
64.3
v) 100x10 mm
284
-
49.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (Powder Coated) DSR-9.100 i) 125 mm
187
-
51.1
ii) 100 mm
142
-
45.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR-9.101) ii) Twin rubber stopper
51
-
38
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR-9.114) ii) Double strip (horizontal type)
43
-
21.5
Providing and Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density and Supplying and stacking at site. ii) 63 mm to 45 mm size stone aggregate. DSR-16.4+16.3 (75mm Compacted)
68.86
-
1898.4
Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron 'Y' shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape(R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of M.S. angle, C.C. blocks shall be paid separately). DSR-16.53
635.35
-
255
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. DSR-16.78 i) With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
137.73
-
2089.7
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green.Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed bywater curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured." DSR-22.6
31.94
-
395
Earth filling with the earth brought from outside the campus irrespective of any lead including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge.
7624.84
-
186
Extra for granite, polishing over kota stone flooring and skirting instead of ordy floor polishing.
634.54
-
49.5
Providing and fixing Powder Coated aluminium fittings for door and windows shutters with screws of required size complete in all respect. I-Hook
71
-
30
Back Stopper
51
-
59.25
Providing and fixing stainless steel wire mesh jali of 22 gauge and 316 grade in aluminium doors and windows in aluminium section excluding the cost of beadings channels etc same will be paid in aluminium work but including labour for fixing the same complete in all respect.
41.45
-
800
Providing and Fixing of 25 mm thick finished red sand stone both side slightly rounded for partition and shelves in C B
62
-
754
Providing and Fixing Chicken Mesh Jali (app 2.0 Kg per 200 Sqft) with nail and washer on wall, columns and beam etc before applying plaster to avoid cracks at junctions and intermediate of wall complete in all respects.
407.71
-
42
Providing and fixing Stainless steel 25mm oval shape hanging rod heavy quality including S.S wall to wall clamp in cupboard fixing in position complete in all respect.
20.12
-
295
Curtain Rod 25 mm of S.S. with 304 grade all Material Wall to wall Latoo complete in all respect.
118.49
-
175
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer.
4925.25
-
25.7
Making Chases in brickwork for providing skirting flush with the plaster.
754.2
-
26.45
Extra labour for plaster for any type of corbelling in RCC at top of parapet complete in all respect.
320.71
-
183
Antitermite Treatment (Pre-construction Work). Providing and injecting chemical emulsion for Anti termite with using Imidacloprid @ 0.075% concentration PCI solution through M/s Pest Control (India) Pvt. Ltd. (10 years warranty).
783.04
-
110
Making Nosing (moulding) with granite polish of the granite stone complete as per design and drawing.
154.91
-
128
Providing and fixing PVC false ceiling with 7 mm thick 250 mm wide of approved colour fixed on 20 mm x 20 mm of 14 gauge M.S Square tube including cost of screws angles clead, rawl plugs with taping and painting etc complete in all respect as approved by the Engineer-in- Charge
31.72
-
1151
Cutting groove in cement concrete work in road/taxi track of size 5mm x 50mm. Complete in all respect.
1373.77
-
28
Finishing and laid cement concrete with vaccum dewatering system surface vibrator and fine trowel complete in all respect.
904.29
-
61.75
Providing and fixing mumty door consisting of mild steel angle iron frame 35x25x5mm thick cross brass 20x5mm @ 4nos at each side ) and two nos M S flats 50x6mm and covered with M S sheet 16 gauge including locking arrangement ( with sliding bolt and T bolt)
344.25
-
74.35
Providing and fixing 4mm thick Acrylic sheet on toilet flush door etc complete in all respect
17.55
-
1066
Providing & fixing M.S. Rod fully threaded with nut bolt and washers in aluminium section window door shutters complete in all respects.
143.94
-
136
Providing and planting grassy lawns including ploughing and dragging with suhaga breaking of clods removal of rubbish dressing and supplying Barmuda grass carpet at 15 cm apart i/c supplying and spreading of farmyard manure at the rate o f 0 .18cum per 100 sqm fertilizer and watering with six month maintenance after completion of work
1858
-
43.05
Providing and fixing of RCC bench without arms having size 1500x1000x620 casted with CC of M-30 Grade installed with nut bolt of GI metal complete in all respects.
4
-
5942
Providing and Planting different type of Plants including digging planting watering manure fertilizing etc, complete in all respect. Gulmohar (Height 10'-0'')
5
-
342.43
Amaltas (Height 10'-0'')
5
-
342.43
Bottle Brush (Height 12'-0'')
5
-
342.43
Flosrijni (Height 14'-0'')
5
-
342.43
Washingtonia (Height 4'-0'')
5
-
2230.63
Chandni Double (Height 4'-0'')
5
-
139.99
Hibiscus (Height 6'-0'')
5
-
55.66
Casia Biflora (Height 6'-0'')
5
-
48.27
Golden Chandni (Height 3'-0'')
5
-
140.48
Cycus
5
-
1118.64
Black Ficus (Height 3'-0'')
5
-
96.92
Champa (Height 6'-0'')
5
-
164.92
TOTAL DSR/NS CIVIL WORK
-
-
-
HSR PUBLIC HEALTH
-
-
-
Earth work in excavation in foundations, trenches Of under ground structures sullage drains, etc., and Other similar works in ordinary soild including Dressing of bottom and sides, to correct levels and templates, cutting Of trees and bushes, dewatering of rain water, diversion of traffic, fixing And maintenance of caution boards, and night singnals, crossing over Trenches for access to houses, watching stacking of excavated soil, clear From the edge of excavation, and subsequent filling, where required around Masonry, in 15 cm layers, with compaction and disposal of surplus Soil as directed within a lead of 30 metres for depth upto 2 METRES BELOW NATURAL GROUND LEVEL (For Public Health works only) (HSR 6.7)(CP 370%)
113
-
932
Excavation for pipelines running under pressureIn trenches and pits, in open areas, where disposal,Of surplus earth is done alongwith the alignment Including trimming & dressing sides, leveling of beds of trenches to Correct grade, cutting joint holes,cutting trees and bushes, etc.,Refilling consolidation and watering of refill in 15 cm layers and Restoration of unmetalled or unpaved surface to ITS ORIGINAL CONDITION, including the cost of dewatering of rain Water, diversion of traffic, night signals, fixing caution boards, watching, Fencing etc., and outside the town in ORDINARY SOIL:- (HSR 6.8)(CP 370%) a) Without timbering and shorting upto 1.5 metres depth
57.44
-
1030
Cement concrete 1 :8:16 with stone agg 40 mm nominal size in foundation and plinth. (HSR10.28)(CP450%)
14.48
-
318.65
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41) (CP450%)
14.34
-
615.6
Earth work for digging well in dry excavation from ground level upto the level where well kerb is placed including depositing spoil within 60 metres radius, and filling space outside the well after completion- (HSR 22.1) (CP 500%) a) from N.S level to 1.5 m depth
46.74
-
897.5
b) exceeding 1.5 metres but upto 4.5 metres depth
71.72
-
1097
Cutting holes upto 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 28.24) (CP 300%) a)11: 43 cm thickness of walls
10
-
14
b)22:86 cm thickness of walls
14
-
20.35
Cutting holes upto 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing complete in all respect. (HSR 28.26)(CP 300%) c) 150mm thickness of floor or roof
21
-
15.4
supplying GI PIPES CLASS B MARKED WITH IS:1239 IN 3.05 M LENGTH, their threading and welding with flanges ( heavy duty) on both sides, jointing with nuts and bolts marked with IS:1363, rubber gaskets marked with IS:638 JOINTING WITH PUM PING MACHINERY AND LOWERING INTO TUBEWELLS and testing including carriage, loading, unloading etc. complete in all respects to the satisfaction of Engineer 100 mm i/d (HSR 28.52) (CP 10%)
26
-
2146
CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design. (HSR 29.84) (CP 450%) b) Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame light duty single seal Pattern 1 weighing 38 kg with C.C. topping )
24
-
582
c) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping )
10
-
690
Extra over for 0.30 mtr depth of inspection chamber (HSR 29.85) (CP 450%) c) 600 mm x 900 mm
20
-
139
Providing and fixing SFRC MANHOLE COVERS AND FRAMES MARKED WITH IS: 12592 including setting the same to correct lines and levels in 1:2 cement sand mortar over manhole including carriage loading unloading stacking handling re-handling etc. complete in all respects to the satisfaction of Engineer-in-Charge. (HSR 29.94) (CP5%) Type:- Extra Heavy Duty Set (HD-20)-560MM Clear Opening
4
-
1100
Providing salt glazed stoneware pipe grade in standard length of 600 mm each pipe marked with IS 651 and their lowering cutting jointing and testing as described in Hsr item no 29.38 29.39 29.40 i/c the cost of jointing material as well as carriage loading unloading stacking handling rehandling etc complete in all respect to the satisfaction of the EIC. (HSR 29.95) (CP5%) a) 150mm
220
-
199
b) 200mm
110
-
253
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC. (HSR 30.41(a)(CP 340%) (iv) Size 550 mm x 400 mm with one no. tap
12
-
407
Providing and fixing in position best Indian make Pedestal fittings of vitreous chinaware complete (as required by the Engineer-in-charge) (HSR 30.44) (CP 340%) i) White
12
-
279
PROVIDING AND FIXING 40 MM 1/0 G.I WASTE PIPE EMBEDDED IN WALLS OR LEAD WASTE PIPE weighing 4.46 kg./metre and 3.0 mm thick UPTO FLOOR LEVEL as required by the Engineer-in-charge INCLUDING COST OF UNION AND PLUMBER JOINT. (HSR 30.62)(CP 340%)
19
-
118
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D INLET. (HSR 30.66) (CP 340%) c) C.P brass with revolving joint.
3
-
122
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.68) ( CP 340%) 25 MM DIA C.P BRASS ADJUSTABLE 600 mm long.
3
-
61
C.P brass towel ring.
3
-
53.5
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. (HSR 30.70) (CP 340%) C.P BRASS Soap dish small
10
-
46.5
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Long nose (HSR 30.75) (CP 340%) a) Bib cock long body
15
-
116
c) Bib cock
12
-
100
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) (HSR 30.76) (CP 340%) 15 MM STOP COCK Stop cock male and female end
16
-
101
Concealed stop cock with flange.
10
-
130
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. (HSR 30.93) (CP 300%) a) 15 mm lead pipe 1.49 kg/metre thickness 2.7 mm
27
-
21
CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION (HSR 30.95(c)(CP 340%) c) Size 75 mm x 50 mm
134.1
-
4
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS (HSR 30.110(b)(CP 340%) (b) WITH PLASTIC BALL (ii) 20 mm internal diameter
7
-
48
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. (HSR 30.114 (c) (CP350%) c) 150 mm internal diameter S.W. gully trap
7
-
182
Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Enginer in charge. (HSR 30.119) (CP 0%) 500 ltrs.
6
-
2682
1000 ltrs.
3
-
5263
TOTAL P.H. WORK (HSR+CP)
-
-
-
P.H. WORK DSR/NS
-
-
-
Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. DSR-17.1
3
-
3494.2
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required. Kitchen sink without drain board 610x460 mm bowl depth 200 mm. DSR-17.10
2
-
2186.25
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 litre/ 6 litre (adjustable to 4 litre/ 8 litres), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. DSR-17.78
9
-
9685.7
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. DSR-18.10 a)15 mm dia
191.97
-
186.4
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. DSR-18.12 c) 20 mm i/d of pipe line
303.75
-
186.3
d) 32 mm i/d of pipe line
134.11
-
247.4
e) 40 mm i/d of pipe line
76.2
-
301.05
Providing and fixing of gun metal gate valve with C.I. wheel of approved quality (screwed end) DSR- 18.17 20mm i/d pipe
21
-
396.55
32mm i/d pipe
7
-
500.75
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). DSR-18.46 b) 20mm dia
21
-
170.95
c) 32 mm dia
15
-
240.65
Providing and fixing of G.I. Hooks for G.I. Pipes etc.
180
-
10
Pdg. & fixing SWR PVC pipe classic type ‘B’ and specials ISI marked and rubber ring with solvent complete in all respect. a) 110mm
182.18
-
315.95
b) 90mm
106.68
-
261.3
Special for 110 mm dia pipe (UNIC/VCO/SVW) Cowel
8
-
29.95
PVC clamp
55
-
28.8
Socket
10
-
87
bend
25
-
106.85
P-Trap
14
-
200
Tee
15
-
148.15
single junction with door
5
-
166
Special for 90 mm dia pipe (UNIC/VCO/SVW) Cowel
4
-
25.4
PVC clamp
35
-
28
Socket
10
-
72.9
Bend
25
-
90.95
Tee
30
-
148.15
Single junction with door
5
-
138.95
Providing and fixing C.P. jali with frame complete in all respect.
36
-
77
Providing and Fixing in position 5.0 mm thick bevelled edge mirror fixed in position with 6 nos chromium plated S.S spacers including holes in mirror complete in all respect.
3.15
-
2863
Providng and fixing in position G I tank nipple complete in all respect. a) 20 mm dia
7
-
60
b) 32 mm dia
3
-
175
Pdg. & fixing SWR PVC Floor Trap type ‘B’ and specials ISI marked including fitting joint solvent mixture i/c rubber ring complete in all respect. Size 100mm dia with 75mm outlet
20
-
273
Providing and fixing 15 mm dia brass ferrule by drilling and tapping upto 100 mm i/d G.I pipe line complete in all respect
2
-
362
Providing and fixing position 15mm dia 50mm long C.P. extension nipple.
50
-
41.4
Pdg. and fixing in position C.P. jet spray all necessary fittings complete in all respect.
6
-
122
Providing and fixing of under counter wash basin of size 550x405mm cera make of camry 1034 complete in fixed in position.
2
-
2318
Providing & placing in horizontal layers filtering media screened, washed and cleaned boulder of 50mm to 200mm size upto 4.5 mt. Depth, complete.
8.49
-
2599
Providing & placing in horizontal layers filtering media screened, washed and cleaned Graver of 20mm to 25mm size upto 4.5 mt. Depth, complete.
3.96
-
1703
Providing & placing in horizontal layers filtering media screened, washed and cleaned Graver of 5mm to 10mm size upto 4.5 mt. Depth, complete.
12.85
-
3068
Providing & placing in horizontal layers filtering media screened, washed and cleaned coarse sand of 1.5mm to 2mm size upto 4.5 mt. Depth, complete.
3.96
-
2130
Providing, Jointing & Lowering 150m i/d slotted PVC pipe, IS:4985, 10kg/sqcm pressure with 20% opening & 3mm slots (As per strata), complete.
20.68
-
763
Boring of 450mm i/d hole in ground for Rain Water harvesting purpose upto 70mt. Depth complete.
60.96
-
713
Providing and jointing & laying of 200mm i/d PVC pipe, IS:4985, 10kg/sqcm pressure, complete.
31.43
-
832
Providing & fixing of 200mm i/d PVC bend.
2
-
350
Providing, jointing & Lowering 150m i/d PVC pipe, IS:4985, 10kg/sqcm pressure upto 70mt. Depth, complete.
43.96
-
713
Providing and Fixing PVC grating cap for 150mm i/d pipe complete.
1
-
100
TOTAL DSR/NS P.H. WORK
-
-
-
E.I. (HSR) PART
-
-
-
HSR 31.12 ( a) ( CP 300%) S/E of metal clad switches/ B.D.B.S with rag bolts on wall or on existing angle iron board i/c bonding to earth and necessary connections.xxi) Double Pole Change over switch 63 amp, 415 volts.
1
-
362
Supply and Erection of molded case circuit breaker on wall or on existing pedestal i/c bonding to earth and necessary connection as per HSR 31.12 c (C.P @60%) xxvi)100-220 amp. 415 volts
1
-
4246
Supply and Erection of miniature circuit breaker/isolator 240/415 Volts in existing distribution board i/c making necessary connections, as per HSR 31.17 (C.P.@ 30%) (A) Miniature circuit breakers of 9 KA breaking capacity. ii) SPMCB 6 Amp to 32 amp
108
-
95
iii) SPN MCB 63 amp
1
-
240
ii) SP MCB 40 Amp to 63 amp
2
-
113
ii) TPMCB 40 Amp to 63 amp
3
-
377
iii) TPN MCB 40 Amp to 63 amp
3
-
499
Supply and Erection OF FITTING AND ACCESSORIES as per HSR 31.18 (C.P.@ 200%) xi) Bakilite angle/straight button holder large size.
135
-
6.2
xxvi) S/E of hexagonal MS box 1.6mm thick, 8cm,7.5cm deep top covered with MS lid by means of screws i/c 10mm dia. 30cm long MS rod made into suitable suspension hook & with 3mm thick backlite sheet erected in RCC slab complete.
53
-
26.3
xx) Supply and erection of rectangular bulk head fitting of size 17 cm x 14 cm, aluminium casted with aluminium colour outside and white stove enamelled inside/complete with guard, glass etc. secured by brass screws suitable upto 100 Watts lamp with B.C. Lamp
2
-
28.6
PIPE LAYING, as per HSR 31.21(C.P.@ 350 %) I) Supply and Erectionof pipe for wiring purpose i/c bends inspection boxes etc. where necessary and painting as required.vii) Galvanised iron pipe 65 mm dia on surface.
6
-
90.8
Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc.a) PVC pipe 120 mm dia.
120
-
59
b) PVC pipe 80 mm dia.
85
-
42
EARTHING, as per HSR 31.22 (C.P.@ 350 %) i)Earthing with G.I earth pipe 4.5 mm long and 40 mm dia with masonry enclosures on the top etc as required.
7
-
378
v) Extra for charcoal or coke and salt for GI plat or copper plate earth electrode.
7
-
125
xii)Pdg. and laying earth connections from earth electrode with 20 mm x3mm strip from earth electrode as required.
35
-
14.1
iii) Earthing with G.I. earth plate 600 mm x 600 mm x 600 mm x 6 mm thick including accessories and providing enclosures accessories and providing enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
1
-
1149
v)Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
1
-
186
x)Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .
6.3
-
155
xv)Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.
3
-
117
Supply and Erectionof under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches as per HSR 31.26 (C.P.@ 140 %) (xl) 16 Sq. mm 4 Core Cable .
45
-
46.8
(xlii) 35 Sq. mm 4 Core Cable .
200
-
65.8
(iv) 10Sq. mm 2 Core Cable .
410
-
27.8
HSR 31.28 (CP 140%) Supply and erection of suitable compression type brass cable glands for under ground cables;-ii) 10 Sqmm to 16 Sqmm cable 2 to 4 core
6
-
9.2
iii) 25 Sqmm to 50 Sqmm cable 2 to 4 core
62
-
16.8
xv) Supply and erection of 32 mm dia G I bracket 1.5 meter long making an angle 10degree to 15 degree with horizontal; plane for mounting street light fixing of GI bracket on wall with 2 nos 32mmx3mm thick MS clamps including cost of cutting welding of GI pipe complete with cement sand mixture,bolts and nuts etc.including necessary connections.(HSR 31.30) CP 270%
10
-
102
HSR 31.35 ( CP 130%) Miscellanious.xi)S/E of aluminium lugs heavy duty i/c crimping etc.up to entire satisfaction of engineer incharge of the work.c)10 sqmm
4
-
0.8
d) 16 sqmm
16
-
1.6
f) 35 sqmm
4
-
2.5
Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost and erection of pipe), as per HSR 31.40 (C.P.@10%) Size 1.5 sqmm ( 3/0.81 )
3305.2
-
10.2
iii) 4.0 sqmm
584
-
24.5
v) Size 10 sqmm
100
-
50
SHEET STEEL ENCLOSURE: Supply & erection of sheet steel enclosure Double door distribution boards suitable for MCBs etc. recessed in wall with rag bolts i/c bonding to earth& necessary connections, as per HSR 31.41 (C.P.@ 10%) vi) 8-way , TP&N ( Horizontal) (8+24)
2
-
2100
x) 8-way , TP&N (Verticall) (8+24)
2
-
4890
iii) 12-way , SP&N ( Horizontal)
1
-
1110
P/F modular type accessories of approved make in existing box i/c fixing and making necessary connection, complete in all respect.( HSR 31.56) CP-0% Fan Regulator
53
-
397
Blinking plate
80
-
25
Call bell
3
-
99
S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work (HSR 31.67) (CP 0%) i) HDPE pipe 63 / 50mm outer dia / inner dia.
300
-
95
Supply & Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacturer including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 pole natural links including connection etc. with suitable connecting arrangment for 2 no. MCBs / kit kat including cost of R.C.C. 1:1.5:3 for foundation of size 0.7 M. x 0.7 M. x 1.8 M with minimum 8 Nos. 12mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineerin-charge of the of the work. (HSR 31.68) (CP 0%) i) 7 Mtr. Long pole with top dia 70mm and botom dia 130mm with base plate of size 220 x 220 x 12mm.
2
-
13940
Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer-in-Charge of the work.HSR 31.78 (C.P.@ 0%) i) 2 pair telephone wire
600
-
7.94
ii)5 pair telephone wire
90
-
19
Masonry Chambers (HSR 29.84 CP 450%) CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design.
3
-
414
TOTAL HSR E.I
-
-
-
E.I NS PART
-
-
-
Wiring with 1.5 sqmm PVC insulated copper conductor cable in 25 mm dia P.V.C. Conduit pipe, heavy gauge, ISI marked (recessed type) including cost of PVC pipe, modular metal box of suitable size with modular inner & outer face plates,copper wire,switch and sockets(modular type)screws, making necessary connections & testing complete in all respect. Fan point (i) Medium
33
-
500
(iii) Long
20
-
698
Light Point (i) Short
45
-
305
(ii) Medium
25
-
473
iii) Long Point
93
-
671
Twin control light point with two way 10 Amp. single pole switch. (iii) Short Point
1
-
343
iii) Long Point
9
-
782
Call bell point i/c M S Box for call bell.c) Long Point
3
-
686
5 Pin 10 AMP plug point including earthing the 3rd pin with 1.50 sqmm copper insulatd earth wire. a)Short point
47
-
463
c) Long Point
41
-
902
5 Pin 20 AMP switch & 16 Amp socket including earthing the 3rd pin with 1.50 Sqmm copper insulated earth wire. (wiring with 4 Sqmm copper wire ) c) Long Point
42
-
1420
S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect. (Recessed Type) (i) Size 25 mm dia
970
-
45
(ii) Size 32 mm dia
40
-
62
Supply and Erection 250mm dia PVC body exhaust fan with louver shutter of suitable size for single phase AC 230 volts 50 Hz, 1210 RPM and capacitor run, complete in all respect. (Model - Ventilair DX in Havell's Make and Brisk AIR in Crompton greaves make)
10
-
1490
Supply and erection of 300 mm sweep, metal exhaust fan, double ball bearing suitable for single phase A.C. 230 Volts, 50 HZ capacitor ,1400 RPM (Heavy duty) complete with mounting ring, blade, fixing and making necessary connections etc. ( Havell's / Crompton Greaves / Usha / Khaitan / Bajaj / Orient - Make)
1
-
2914
S/E of Aluminium anodized louver shutter for exhaust fan( Thickness of frame 1.00 mm & blade thickness 0.80mm) including all labour and petty material required to complete the job.( Cannon/National make)
1
-
365
Supply & Erection of 20 watt 4000K LED indoor batten type tube light with alumunium extrusion ,4 feet long complete in all respect i/c making necessary connections.Make as per Brand list of HPHC
46
-
566
S/E of post top lanterns inetgral black abc plastic spigot for 2x20 watt verion spun aluminum funnel shape with clear acrylic i/c 2 nos. LED 20 watt . complete in all respect making necessary connection complete with all labour and petty material required.
2
-
3548
S/E LED 72 watt, 6 K die cast aluminium street light luminaire complete with all job in respect and other material reqd. Make as per Brand list of HPHC
20
-
4578
Supply and erection of modular type switch socket accessories on existing modular box.a) Modular T.V socket one module
2
-
115
b) Motor starter 25 amp, 2 moudle (for AC point)
4
-
419
c) Computer Jack RJ-45
11
-
413
d) Telephone Jack RJ-11
11
-
113
S/E of water cooler of fully stainless steel body with 150 ltr storage & cooling capacity (make -USHA/ sidwal/ voltas) &Water purifier of 40 ltr.(make-Kent,Full) with all petty material with 5KVA Stabilizer copper wound of make microtek/ luminious as per entire satisfaction of EIC of the work.
2
-
91900
S/E of 1400 VA Invertor ( Luminious / Exide/Microtek / Sukem make ) suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150 AH Exide tubular batteries having warranty of 2 years i/c cost of trolly for batteries complete with all labour and petty material required i/c making necessary connections upto entire staisfaction of Engineer-in-Charge of the work.
2
-
30475
Supply & Erection of 42 watt 6000K LED Surface mount fitting m.s body 2'x2' sutable for operation on 230 V. 50 hz Ac .supplycomplete in all respect i/c making necessary connections. Make as per Brand list of HPHC
36
-
3327
S/e of round co axial cable for TV of size RG 6 with electrolytic grade solid bare copper conductor polyethlene foam insulation with laminated aluminium tape and wire brand jeely flooded and pvc black jacket in existing pipe complete in all respect i/c making necessary connections etc.
610
-
19
Providing and fixing of fire extinguishers of CO2 type of 4.5 Kg. Capacity complete with Horn and valve with initial charge as required .i) 4.5 Kg capacity
2
-
6680
ii) ABC Type 4.0 Kg capacity
2
-
2280
iii) ABC Type 2.0 Kg capacity
2
-
1355
S/E of LED 40" TV with WIFI system as per Specifications:- i) Full H D commercial / Professional LED TV with TV tunner Card,( With WIFI),Resoluation:- 1920x1080,viewing angle:- 178degree x178 degree or more , Audio capacity of speakers:- minimum 8 watt x2. Power supply 220volts-240 volts, 50- 80 Hz with base stand and Energy Saving. BIS cirtification is mandatory. The LED TV must be with latest energy star cirtifications.Warranty 3 years from date of installations. and complete with all accessories i.e. required cables,remote control,power cable, HDMI cable, manual etc.up to entire satisfaction of EIC of the work.( Make :- Sony/ Samsung)
1
-
42000
SITC of EPABX system, complete in all respect consisting of following items:- i) EPABX machine equiped with4 trunks, & extensions and expendable type ( Make :- NEC,model-SL 1000/Panasonic)
1
-
23177
ii) Telephone set Model P-tel PT33
11
-
670
iii) Telephone set Model P-Tel PT55
1
-
1228
iv)stablizer CVR-500 VA
1
-
2056
S/E of tag block for terminating telephone cables. The tag block is to be fixed on existing wall with screws etc.b) Size 20 Pair.
1
-
1500
S/e of 4 pair UTP CAT 6 cable of approved make in existing pipe complete in all respect i/c all labour & mateiral & making necessary connection
500
-
25
S/I/T/C of high wall "split type Air- conditioning unit"2.0 TR capacity of 3 Star rating ( Hitachi/O-General Daikin - Make) rated at 220 volts + 10%,single phase, 50 cycle per second electric supply and consisting of condensing and indoor unit, control panel of the unit, LCD Cordless remote, internal control wiring, thermostats, all accessories ,stabilizer 5 KVA copper wound 3 steps( Live guard in luminious-/Microtek Make) wall mount and first charge of Gas & oil. The work should be completed in all respect including making repair of wall, floor and roof in original shape caused by making holes and chases etc.The work should complete in all respect up to entire satisfaction of EIC of the work.
1
-
50500
Supply & erection of 1400 mm sweep, A.C. Ceiling fan , capacitor type, copper wound, double ball bearing complete with 300 mm down rod/100, canopies, shackles, three nos. blades made of aluminium alloy suitable for single phase A.C. 230 Volts, 50 HZ supply but without regulator. Make as per Brand list of HPHC
53
-
1290
Supply Installation Testing & Commissioning of Nexus 2.0 Megapixel IP Outdoor Bullet Camera, 3.6mm lens,36 led, IR range upto 35 Mtr., Support WEB remote config, OSD, Motion detect, 1/2.7" Progressive scan CMOS sensor, Video Resolution - Main stream:1920*1080,Sub stream:704*576 ;H.264,support dual-stream,AVI;0.1M~8Mpbs variable;1~30f/s variable, Minimum Illumination - color 0.6Lux@F1.2 , Black & White 0.00 Lux@F1.2 , Noise-signal Ratio - 58dB. Make:- Bosch, Honeywell,Siemons
8
-
4470.31
Supply Installation Testing & Commissioning of Nexus 8 channels Network Video Recorder, IP Video Input: 8-ch, Incoming bandwidth: 160Mbps,Outgoing bandwidth: 80Mbps,HDMI/VGA Output: 1-ch, resolution: 1920 × 1080P /60Hz, 1600 × 1200 /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz, Network Interface: 1RJ-45 10/100/1000Mbps self-adaptive Ethernet interface, USB Interface: 1 × USB 2.0 and 1 × USB 3.0, 2 HDD Supported, max 4TB.
1
-
9434.1
Supply Installation Testing & Commissioning of 40" LED Monitor with wifi system compatiable to CCTV camera system. (Sony/Smsung)
1
-
37996
Supply Installation Testing & Commissioning of WD 4TB Survillance Hard Disk Drive.(Sony/Segate/Toshiba)
1
-
10246.88
Supply & Installation of POE Switch 24 ports 10*100*1000 with 2 combo port.(D-Linl,Cisco)
1
-
12133.7
Supply & Installation of Dlink Cat 6A Cable UTP Cable .
415
-
25
Supply & Installation of Dlink Cat6A I/O with Face Plate & SMB.
8
-
369.62
Supply & Installation of Dlink Cat6A Patch Cord - 1 Meter.
8
-
208.03
Supply & Installation of Cat6A -24 Port Patch Panel Loaded
1
-
9434.1
Supply & Installation of 6U Rack with Accessories .(Comvace,Volvare)
1
-
6066.85
Supply of HDMI Cable 5 Mtr.
1
-
532.18
Supply, installation, testing and commissioning of Way Extension Board Extension cord with Surge & Spike Protection complete in all respect.
1
-
532.18
Supply installation ,testing and commisioning of 1 KVA UPS INVERTOR On Line With 1 hour Backup. (Microtek,Liminious,Exide)
1
-
25873.62
Total N S
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements