Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 4,70,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_HBC_69996_1Bid Award Id
ViewTender No
2018/SEPT-21/ 17Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
2nd Storey
572.85
127888
44.65
3rd Storey
461.7
112308
48.65
4th Storey
225
59231
52.65
Centring and shuttering for columns (square or rectangular or Polygonal in plan) HSR 9.9 CP 400% 1st Storey
162.54
40188
49.45
2nd Storey
162.54
43438
53.45
3rd Storey
162.54
46689
57.45
4th Storey
21.18
6507
61.45
Centring and shuttering for columsn (circular or curved in plan) (HSR 9.10) (CP 400%)
477.56
151386
63.4
2nd Storey
288.42
97197
67.4
3rd Storey
288.42
102965
71.4
Centring and shuttering for corbel, parapets, fascias and other similar items, including edges. (HSR 9.11) (CP 400%)
144.25
28561
39.6
2nd Storey
345.5
75319
43.6
3rd Storey
313
74494
47.6
4th Storey
137
35346
51.6
Shuttering for faces of concrete foundations and foundation beams (vertical or battering) as per (HSR 9.13) (CP 400%)
216.74
33215
30.65
Clearing grass and removal of the rubbish upto distance of outside the periphery of the area cleared. (HSR 6.27) (CP 370%)
3356.47
3383
21.45
Cement concrete 1 :8:16 with stone agg 40 mm nominal size in foundation and plinth. (HSR10.28) (CP450%)
76.57
134194
318.65
Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.32) (CP 450%)
28.19
53994
348.25
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.39) (CP 450%)
81.81
181376
403.1
Cement concrete 1 : 8 : 16 with stone aggragate 40 mm nominal size in first storey upto 4 metres above plinth level. (HSR 10.46) (CP 450%) 1st storey
9.08
16225
324.9
2nd storey
7.43
13381
327.45
3rd storey
5.24
9510
330
4th storey
8
14632
332.55
Design mix cement concrete of grade M-20 with minimum cement contents 300 kg/cum in foundation and plinth. (HSR 10.65) (CP 450%)
108.37
377737
633.75
Design mix cement concrete of grade M-20 with minimum cement contents 300 kg/cum in first storey upto 4 metres above plinth level. (HSR 10.72) (CP 450%)
190.86
671827
640
2nd Storey
132.18
467127
642.55
3rd Storey
88.28
313221
645.1
4th Storey
20.34
72452
647.65
Cement concrete 1:1-1/2:3 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. (HSR 10.132 + 10.95a) (CP 450%)
80.6
323298
729.3
First class brick work laid n cement sand mortar 1:6 in foundation and plinth. (HSR 11.2)(CP 600%)
86.08
237077
393.45
First class brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. (HSR 11.9) (CP 600%)
7.56
23581
445.6
2nd storey
4.95
15725
453.85
3rd storey
3.26
10545
462.1
Dressing, chamfering of bricks to required Shape in masonry work. (HSR 11.81)(CP 600%) (Labour Rate)
4720
24367
73.75
Providig and fixing factory manufactured jali of reinforced cement coarse sand and 10 mm and down gauge bajri in the ratio of 1:1:2 with 8 mm dia for steel outer frame of the jali will be 50 mm wide and 25 mm wide and 25 mm thick with smooth fiish as per design approved by the Engineer-in-Charge including fixig in position up to any height with cement sand mortar 1:4 complete i all respect (HSR 11.103) (CP 0%)
85.49
55568
650
11.43 cm thick brick wall laid in cement sand mortar 1:4 in superstructure. (HSR 11.48(a) (CP 600%) 1st Storey
389.43
150203
55.1
2nd Storey
328.4
128847
56.05
3rd Storey
266.68
106405
57
First class brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level.( HSR 11.7) (CP 600%) 1st Storey
141.8
411383
414.45
2nd Storey
130.15
385100
422.7
3rd Storey
101.07
304892
430.95
4th Storey
35.28
108464
439.2
Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.(HSR 13.13) (CP 600%) Note- Polythene sheet instead of bitumen will not be used 1st Storey
106.04
39303
52.95
2nd Storey
184.41
69642
53.95
3rd Storey
269.47
103651
54.95
4th Storey
30.99
12137
55.95
Top khurra 0.6 m X 0.6 m for rain water pipe in 25 mm thick cement concrete 1:2:4 over 50 mm thick cement concrete 1:8:16 (HSR 13.50) (CP 240%)
26
1087
12.3
Cement concrete 1:1.1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. (HSR 13.64) (CP 240%) 3rd storey
296.04
6069
6.03
4th Storey
10.45
214
6.03
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. (HSR 13.89) (CP 20%) a) 100 mm
182.13
39777
182
Providing and fixing PVC bend ISI mark (HSR 13.90)(CP 20%). a) 100 mm
29
3389
97.4
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. (HSR 14.1) (CP 400%)
490.03
90533
36.95
Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping (HSR 14.4) (CP 400%) 2nd Storey
382.42
29924
15.65
3rd Storey
232.24
18521
15.95
Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings.(HSR14.45 + Note ) (CP 400%)
213.66
119094
111.48
Kota stone flooring minimum 25 mm thick in any pattern as specified over 20 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. (HSR 14.62)(CP 250%) Note :- i) Single piece of stone to be used in steps of stair. ii) Size of one piece should not be less than 22''x22'' for flooring. iii) Kotah stone with spacer joint 1'' wide duly finished with marble chips in white cement. iv) No extra payment will be made on behalf of above note i), ii) & iii). 1st Storey
151.14
106829
201.95
2nd Storey
48.27
34169
202.25
3rd Storey
28.43
20154
202.55
4th Storey
30.38
21569
202.85
Kota stone 20 mm thick in skirting risers of steps, dados and wall facing (lining) and pillars laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. (HSR 14.66) (CP 250%) Note - Only single piece of kota stone for treads and risers 1st Storey
78.58
65182
237
2nd Storey
52.33
43462
237.3
3rd Storey
35.73
29713
237.6
Providing and fixing vitrified tiles of size 600x 600mm of approved make in flooring laid in any pattern as spcefied over base of 20mm thick cement coarse sand mortar 1:3 and jointed with while cement slurry mixed with pigment to match the shade to tiles. (HSR 14.89)(CP -15%) NOTE:- Tile shall be of premium quality (first quality)
717.68
563848
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to matyh the shade to tiles. NOTE:- Tile shall be of premium quality(first quality) (HSR 14.90)(CP -15%)
72.81
57543
929.8
Providing and fixing ceramic tiles/ anti skid tiles of size of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thic cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. NOTE:- Tile shall be of premium quality(first quality) (HSR 14.91)(CP -15%)
212.31
112609
624
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete.(HSR 14.92 b) (CP 0%) b) Size of ceramic glazed tiles 300mm X 450mm
751.82
487292
648.15
12 mm thick cement plaster 1:4 (HSR15.5)(CP 500%) 1st storey
959.49
73113
12.7
2nd Storey
929.04
71796
12.88
3rd Storey
354.64
27789
13.06
4th Storey
313.64
24915
13.24
12mm thick cement plaster 1:6. (HSR 15.7) (CP500%) 1st Storey
911.95
58273
10.65
2nd Storey
795.5
51691
10.83
3rd Storey
354.66
23428
11.01
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall. (HSR 15.10) (CP 500%) 1st Storey
29.75
2793
15.65
2nd Storey
29.75
2825
15.83
3rd Storey
496.5
47693
16.01
4th Storey
182.87
17763
16.19
5th Storey
18.55
1821
16.37
15mm thick cement plaster 1:6 on the rough side of single or half brick wall. (HSR 15.12)(CP 500%) 1st Storey
957.7
75275
13.1
2nd Storey
779.88
62140
13.28
3rd Storey
339.05
27381
13.46
10 mm thick cement plaster 1:4 (HSR 15.52) (CP 500%) (under side of ceiling) 1st Storey
631.1
47900
12.65
2nd Storey
490.22
37737
12.83
3rd Storey
350.95
27395
13.01
4th Storey
66.02
5224
13.19
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete. (HSR 16.1) (CP 230%)
1138.23
17278
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. (HSR 16.2) (CP 230%)
1138.23
14085
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. (HSR 16.3)(CP 230%)
1510.28
46848
9.4
Applying priming coat with metal primer on New steel or iron work including preparation of surface. (HSR 16.9)(CP 230%)
372.06
3867
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats including priming coat on new work.(HSR 16.58)(CP 230%)
6183.19
185681
9.1
Providing two coats of exterior acrylic emulsion paint. (HSR 16.79) (CP 0%) 1st quality
3314.23
161568
48.75
Providing & applying two coats of white cement based putty over plusted surface and grinding the surface smooth with sand paper to get an even and smooth finish including and carriage of all material, labour charges, scaffolding, sundries etc complete in alll repect (JK/Birla make) (HSR 16.81) (CP 230%)
9497.42
355725
11.35
Supplying and fixing hydraulic door Closer, I.S.I mark, with necessary Screws, etc., complete- (HSR 17.82)( CP 300%) I.S.I designation No. II (side of door 701 mm to 850 mm)
64
52326
204.4
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position) (HSR 17.93 )(CP 165%) (Less Note 17.18(i) 25 mm thick
166.41
170727
387.15
35 mm thick
307.86
355823
436.15
Providing & fixing aluminium work for done doors, windows, ventilators and partitions sections/appropriate Z sections and other sections of approved make conforning to IS;733 and IS;1285 fixed with rawel plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top bottom, and sides with required neoprane felt etc. aluminium sections shall be smooth, rust free straight mitered and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing/paneling CP brass/ stainless steel screws, etc, complete shutters of doors windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of PVC/neoprane gasket required including Aluminium fitting. (HSR 17.96) + note (CP 15%)
2156.91
666495
268.7
Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC/neiprene gasket etc. complete. (HSR 17.98) (CP 15%) (a) with float glass panes of 5mm thickness.
75.87
61075
700
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. (HSR 18.12) (CP 500%)
34.47
215165
1040.35
Stair case railing of 40 mm internal dia G.I pipe class ‘B’ as per I.S. No. 1239 as hand rail using flats and square bars as supporting members and base plate welded as per design specified including cutting, welding rods and complete fixed in position. (HSR 18.13a) (CP 500%)
8.42
58451
1157
b) Parapet railing of 40 mm internal dia G I pipe class ‘B” as per I.S no. 1239 as hand rail using flats and squre bars as supporting members and base plate welded as per design specified including cutting, welding rods and fixed I position complete in all respect.
11.45
84569
1231
FE-500 D TMT steel bars for R.C.C. works, where not included in the complete rate of R.C.C including bending, binding and placing in positon complete. (HSR 18.22 CP ) (CP 500%)
818.02
4500991
917.05
Supplying and fixing glass panes including special metal sash putty of approved make. (HSR 18.30) (CP 500%) b) glass panes 4 mm thick, exceeding 40 sq dm areas.
125.12
86633
115.4
Pressed steel sheet frames (chowkats), consisting of 2 mm thick steel sheet of the specified sections, including iron lugs (hold fasts), iron hinges, conforming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, or approved quality, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:3:6 for lugs complete:-(HSR 18.34) (CP 500%) (b) Door and window frame of size 76 mm X 38 mm with 35 mm wide single rebate
907.96
319238
58.6
(c) Door and window frame of size 127 mm X 50 mm with 40 mm wide double rebate.
1471.29
677970
76.8
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed. (HSR 24.1) (CP 370%)
661.45
2874
92.45
Dismentaling of old 9 Nos Houses
-
-
-
Dismantling Brick Work, Tile Masonry or Tile Lining and Tile Terracing. (HSR 8.5) (CP 550%) b) In Cement
248.89
57593
35.6
d) in mud
12.23
1057
13.3
Dismantling Roofing. (HSR 8.8) (CP 550%) d) demolishing mud phaska in tile terracing.
321.12
25986
12.45
Removing doors and windows (wooden and steel) together with the Dismantling of walls:- (HSR 8.17) (CP 550%) a) doors
36
1462
6.25
b) Window
18
485
4.15
Dismantling cement conglomerate/terrazzo floors 25 mm to 50 mm Thick including concrete base. (HSR 8.25) (CP 550%)
280.09
10468
5.75
TOTAL CIVIL WORK (HSR+CP)
-
-
-
Recovery of Material for Old Houses (Detail Attached)
1
-228835
228835
G.Total
-
-
-
Note:- Stone aggregate and coarse sand of red colour will not be used at site.
-
-
-
CIVIL WORK DSR/NS
-
-
-
Add for using extra cement in the utems of design mix over and above the specifed cement content there in (DSR-5.35)
270.01
181649
672.75
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete. (Powder Coated) DSR-9.96 ii) 250x16 mm
143
27055
189.2
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. (Powder Coated) DSR-9.97 iii) 200x10 mm
128
9747
76.15
iv) 150x10 mm
254
16332
64.3
v) 100x10 mm
512
25190
49.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than gradeAC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. (Powder Coated) DSR-9.100 i) 125 mm
389
19877
51.1
ii) 100 mm
392
17679
45.1
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS :1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. (DSR-9.101) ii) Twin rubber stopper
103
3914
38
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. (DSR-9.114) ii) Double strip (horizontal type)
96
2064
21.5
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with Udaipur green marble. (DSR- 11.23)
80.25
127549
1589.4
Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface. Water thinnable cement primer. (DSR-13.43)
3314.23
122460
36.95
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying:
(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green.
Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by
water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured." DSR-22.6
172.3
68058
395
Earth filling with the earth brought from outside the campus irrespective of any lead including laying in 15cm in layers, watering and consolidating complete in all respect and fully satisfaction of Engineer-in-charge.
1449.08
269528
186
Providing and fixing Powder Coated aluminium fittings for door and windows shutters with screws of required size complete in all respect. I-Hook
216
6480
30
Providing and fixing Powder Coated aluminium fittings for door and windows shutters with screws of required size complete in all respect. Sliding Bolts - 150 mm x 12mm
72
8640
120
Providing and fixing stainless steel wire mesh jali of 22 gauge and 316 grade in aluminium doors and windows in aluminium section excluding the cost of beadings channels etc same will be paid in aluminium work but including labour for fixing the same complete in all respect.
184.56
147648
800
Providing and fixing 25 mm thick finished red sand stone both side slightly rounded for partition and shelves in C B complete in all respect.
85.8
64693
754
Providing and fixing Stainless steel 25mm oval shape hanging rod heavy quality including S.S wall to wall clamp in cupboard fixing in position complete in all respect.
45.73
13490
295
Curtain Rod 25 mm of S.S. with 304 grade all Material Wall to wall Latoo complete in all respect.
236.69
41420
175
Making Chases in brickwork for providing skirting flush with the plaster.
747.49
19771
26.45
Extra labour for plaster for any type of corbelling in RCC at top of parapet complete in all respect.
304.27
55681
183
Antitermite Treatment (Pre-construction Work). Providing and injecting chemical emulsion for Anti termite with using Imidacloprid @ 0.075% concentration PCI solution through M/s Pest Control (India) Pvt. Ltd. (10 years warranty).
546.31
60094
110
Making Nosing (moulding) with granite polish of the granite stone complete as per design and drawing.
304.39
38961
128
Providing and fixing 75mm i/d rain water pipe 6 kg pressure of make etc complete in all respect.
183.04
26357
144
Providing and fixing 75mm i/d tee 6 kg pressure of make etc complete in all respect.
43
2795
65
Providing and fixing 75mm i/d bend 6 kg pressure of make etc complete in all respect.
42
2310
55
Cutting groove in cement concrete work in road/taxi track of size 5mm x 50mm. Complete in all respect.
312.12
8739
28
Finishing and laid cement concrete with vaccum dewatering system surface vibrator and fine trowel complete in all respect.
661.45
40844
61.75
Providing and fixing mumty door consisting of mild steel angle iron frame 35x25x5mm thick cross brass 20x5mm @ 4nos at each side ) and two nos M S flats 50x6mm and covered with M S sheet 16 gauge including locking arrangement ( with sliding bolt and T bolt)
1113.33
82776
74.35
Providing and fixing 4mm thick Acrylic sheet on toilet flush door etc complete in all respect
49.23
52479
1066
Providing and fixing PVC false ceiling with 7 mm thick 250 mm wide of approved colour fixed on 20 mm x 20 mm of 14 gauge M.S Square tube including cost of screws angles clead, rawl plugs with taping and painting etc complete in all respect as approved by the Engineer-in- Charge
110.35
127012
1151
Providing and fixing of rustic tiles laid over 20mm cement course sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles of approved make etc complete in all respect.
166.92
155068
929
Providing & fixing M.S. Rod fully threaded with nut bolt and washers in aluminium section window door shutters complete in all respects.
541.96
73706
136
Providing laying and consolidating Granular Sub base Grade-I including cost of laying, watering, consolidating rolling to specification complete in all respect. DSR 16.78
80.6
168429
2089.7
Providing laying and consolidating stone metal wearing coat laid to water bound macadam specification with stone metal 53 to 22.4 mm (G-14) gauge in including cost of laying, watering, and consolidating rolling to specification complete in all respect. DSR 16.3 +16.4 compected 5 mm thick
40.3
76505
1898.4
Providing & Fixing 3'-0'' high stainless steel railing as per approved drawing and design consisting of members of S.S.304 grade, 16 gauage with 50mm (OD) hand rail and balustrade, 16mm (OD) mid rails, 100mm dia x 8mm thick base plate directly mounted on floor using fischer make anchors complete.
88
46816
532
TOTAL DSR/NS CIVIL WORK
-
-
-
HSR PUBLIC HEALTH
-
-
-
Excavation for pipelines running under pressureIn trenches and pits, in open areas, where disposal,Of surplus earth is done alongwith the alignment Including trimming & dressing sides, leveling of beds of trenches to Correct grade, cutting joint holes,cutting trees and bushes, etc.,Refilling consolidation and watering of refill in 15 cm layers and Restoration of unmetalled or unpaved surface to ITS ORIGINAL CONDITION, including the cost of dewatering of rain Water, diversion of traffic, night signals, fixing caution boards, watching, Fencing etc., and outside the town in ORDINARY SOIL:-(HSR 6.8)(CP 370%) a) Without timbering and shorting upto 1.5 metres depth
663.98
29084
932
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. (HSR 10.41) (CP450%)
47.21
159843
615.6
Cutting holes upto 23 cm through stone masonry or brick work in cement walls for pipes and making good including repointing, replastering and finishing according to existing finish where required. (HSR 28.24) (CP 300%) a)11: 43 cm thickness of walls
168
9408
14
b)22:86 cm thickness of walls
135
10989
20.35
Cutting holes upto 23 cm square for pipes in floor and roofs of cement concrete reinforced concrete or reinforced brick work and making good including repointing complete in all respect. (HSR 28.26)(CP 300%) c) 150mm thickness of floor or roof
144
8870
15.4
Providing and fixing STEEL BAR EMBEDDED PLASTIC STEPS OF SIZE 263 MM X 165 MM of orange colour, conforming to specifications, in pump chambers, manholes etc.having minimum 3mm thick Polypropylene polymer conforming to IS:10910 encapsulated on 12mm dia ribbed steel bars per IS:1786 (HSR 29.28)(CP 120%)
89
17622
90
CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design. (HSR 29.84) (CP 450%) b) Size 450 mm x 600 mm inside (with 455 mm x 610 mm cover and frame light duty single seal Pattern 1 weighing 38 kg with C.C. topping )
10
32010
582
c) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping )
18
68310
690
Extra over for 0.30 mtr depth of inspection chamber (HSR 29.85) (CP 450%) b) 450 mm x 600 mm
10
5665
103
c) 600 mm x 900 mm
14
10703
139
Providing salt glazed stoneware pipe grade in standard length of 600 mm each pipe marked with IS 651 and their lowering cutting jointing and testing as described in Hsr item no 29.38 29.39 29.40 i/c the cost of jointing material as well as carriage loading unloading stacking handling rehandling etc complete in all respect to the satisfaction of the EIC. (HSR 29.95) (CP5%) a) 200mm
267
70928
253
b) 300mm
206.68
121527
560
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary; R.S or C.I BRACKETS for building into wall including Painting; 32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug; 15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge) ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC. ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC.(HSR 30.41(a)(CP 340%) (iv)) Size 550 mm x 400 mm with one no. tap
34
60887
407
PROVIDING AND FIXING 40 MM 1/0 G.I WASTE PIPE EMBEDDED IN WALLS OR LEAD WASTE PIPE weighing 4.46 kg./metre and 3.0 mm thick UPTO FLOOR LEVEL as required by the Engineer-in-charge INCLUDING COST OF UNION AND PLUMBER JOINT.(HSR 30.62)(CP 340%)
79
41016
118
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE SHOWER WITH 15 OR 20 I/D INLET. (HSR 30.66) (CP 340%) c) C.P brass with revolving joint.
34
18251
122
PROVIDING AND FIXING IN POSITION BEST INDIAN MAKE TOWEL RAILS FIXED in with rawlslugs embedded in walls with C.P brass screws. Complete in all respect INCLUDING CUTTING AND MAKING GOOD THE WALLS ETC. (HSR 30.68) (CP 340%) 25 MM DIA C.P BRASS ADJUSTABLE 600 mm long.
34
9125
61
C.P brass towel ring.
51
12005
53.5
Providing and fixing in position best Indian make Soap dish fixed into wall with C.P brass screws and complete in all respects including cutting and making good the wells etcs. ( HSR 30.70) (CP 340%) C.P BRASS Soap dish small
51
10434
46.5
Providing and fixing in position 15 mm i/d C.P brass bib Cocks of best quality (as required by Engineer-in-charge) Long nose (HSR 30.75) (CP 340%) a) Bib cock long body
110
56144
116
c) Bib cock
68
29920
100
Providing and fixing in position C.P brass stop cocks (as Approved by the Engineer-in-charge) (HSR 30.76) (CP 340%) 15 MM STOP COCK Stop cock male and female end
112
49772
101
Concealed stop cock with flange.
60
34320
130
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. (HSR 30.93(C)(CP 300%) 15mm alkahene pipe inlet connection
121
5082
10.5
CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION (HSR 30.95(c)) (CP 340%) c) Size 75 mm x 50 mm
288.04
5069
4
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS (HSR 30.110(b)(CP 340%) (b) WITH PLASTIC BALL (ii) 20 mm internal diameter
17
3590
48
PROVIDING AND FIXING IN POSITION GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. (HSR 30.114c) (CP340%) c) 150 mm internal diameter S.W. gully trap
22
17617
182
Providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplast, O.K Supreme make with covers/ lids marked with IS: 12701 on roof top of buildings including cost of hoisting and placing in position, making connections with inlet and outlet pipes, providing overflow & scour provisions with suitable plug on scour pipe including cost of nipples, washers, flanges for connections in tanks complete in all respects to the satisfaction of Enginer in charge. (HSR 30.119) (CP 0%) 500 ltrs.
17
45594
2682
TOTAL P.H. WORK (HSR+CP)
-
-
-
P.H. WORK NS
-
-
-
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. Internal work - Exposed on wall. DSR-18.10 a)15 mm dia
293.7
54745
186.4
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work. DSR-18.12 c) 20 mm i/d of pipe line
690.5
128640
186.3
d) 32 mm i/d of pipe line
261.7
64744
247.4
Providing and fixing gun metal gate valve with C.I. wheel of approved quality
(screwed end). (DSR-18.17) i) a) 20 mm nominal bore
82
32517
396.55
ii) 32 mm nominal bore
22
11016
500.75
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work). DSR-18.46 b) 20mm dia
54
9231
170.95
c) 32 mm dia
38
9144
240.65
Providing and fixing of G.I. Hooks for G.I. Pipes etc.
425
4250
10
Pdg. & fixing SWR PVC pipe classic type ‘B’ and specials ISI marked and rubber ring with solvent complete in all respect. a)110mm
206.42
65218
315.95
b)90mm
205.15
53605
261.3
Special for 110 mm dia pipe (UNIC/VCO/SVW) Cowel
68
2036
29.95
PVC clamp
78
2246
28.8
Socket
50
4350
87
bend
78
8334
106.85
P-Trap
54
10800
200
Tee
54
8000
148.15
single junction with door
66
10956
166
Special for 90 mm dia pipe (UNIC/VCO/SVW) Cowel
54
1371
25.4
PVC clamp
90
2520
28
Socket
50
3645
72.9
Bend
66
6002
90.95
Tee
54
7290
135
Single junction with door
50
6947
138.95
Providing and fixing C.P. jali with frame complete in all respect.
146
11242
77
Providing and fixing in position 5.0 mm thick bevelled edge mirror fixed in position with 6 nos chromium plated S.S spacers including holes in mirror complete in all respect.
36.9
105644
2863
Providng and fixing in position G I tank nipple complete in all respect. a) 20 mm dia
22
1320
60
b) 32 mm dia
34
5950
175
Providing and fixing SWR PVC Floor Trap type ‘B’ and specials ISI marked including fitting joint solvent mixture i/c rubber ring complete in all respect. Size 100mm dia with 75mm outlet
101
27573
273
Providing and fixing 15 mm dia brass ferrule by drilling and tapping upto 100 mm i/d G.I pipe line complete in all respect
9
3258
362
Providing and fixing position 15mm dia 50mm long C.P. extension nipple.
87
3601
41.4
Providing and fixing best Indian make 1st quality chinaware orrisa pan with pvc cistern 10 ltr dual capacity with original fitting, pvc bend 32mm dia with flush pipe complete in all respect.
17
61200
3600
Providing and fixing in possition best Quality stainless steel sink( Glossy) with complete fittings Bowl size 24"x18"x8".
17
87329
5137
Providing and fixing in position best Indian make first quality European wall hung water closet suit white colour (HINDWARE or CERA MAKE) complete with seat cover,100mm dia PVC bend and 32mm dia Cromium plated dual flush valve Jaquar make Cat No. FLV-1085 with plate, nut bolts & all necessary fitting complete in all respect.
17
137700
8100
Providing and fixing in position C.P. jet spray all necessary fittings complete in all respect.
17
2074
122
TOTAL DSR/NS P.H. WORK
-
-
-
E.I. Work (HSR PART)
-
-
-
Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. HSR 31.12 (c) CP @ 60%) ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.
3
20380
4246
S/E of miniature circuit breaker/isolator 240/415 Volts in existing distribution board i/c making necessary connections, as per HSR 31.17 (C.P.@ 30%)
(A) Miniature circuit breakers of 9 KA breaking capacity.
ii) SP MCB of 9 KA breaking capacity 6 amp. to 32 amp.
182
22477
95
ii) SPN MCB of 9 KA breaking capacity 40 amp. to 63 amp.
34
10608
240
S/E OF FITTING AND ACCESSORIES as per HSR 31.18 (C.P.@ 200%)
xi) Bakilite angle/straight button holder large size.
192
3571
6.2
xxvi) S/E of hexagonal MS box 1.6mm thick, 8cm,7.5cm deep top covered with MS lid by means of screws i/c 10mm dia. 30cm long MS rod made into suitable suspension hook & with 3mm thick backlite sheet erected in RCC slab complete.
57
4497
26.3
PIPE LAYING, as per HSR 31.21(C.P.@ 350 %)
S/E of pipe for wiring purpose i/c bends inspection boxes etc. where necessary and painting as required.
vi) Galvanised iron pipe 50 mm dia on surface.
6
2057
76.2
Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. b) PVC pipe 80 mm dia.
50
9450
42
EARTHING, as per HSR 31.22 (C.P.@ 350 %)
i) Earthing with GI earth pipe 4.5mtr. long and 40mm dia with masonry enclosure on the top etc. as required.
9
15309
378
ii) Extra for using salt & charcoal/coke for pipe earth electrode as required.
9
5062
125
iii)Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.
6
12231
453
v)Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
6
5022
186
xii) Pdg. and laying earth connections from earth electrode with 4.00 mm dia G.I. wire in 15 mm dia G.I. pipe from earth electrode as required .
125
13781
24.5
xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. stapples of same size.
90
5710
14.1
S/E of under ground cable loose in existing pipe or trenches including necessary connection, digging and refilling of trenches as per HSR 31.26 (C.P.@ 140 %)
(v) 16 Sq. mm 2 Core Cable. (Unarmoured)
1080
68169
26.3
(v) 16 Sq. mm 2 Core Cable. (Armoured)
400
33600
35
xxix) 95 Sq. mm 3.5 Core Cable .
250
72660
121.1
Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost and erection of pipe), as per HSR 31.40 (C.P.@10%)
Size 1.5 sqmm ( 3/0.81 )
4785
53687
10.2
Size 4 sqmm ( 7/0.85 )
1400
37730
24.5
SHEET STEEL ENCLOSURE: Supply & erection of sheet steel enclosure Double door distribution boards suitable for MCBs etc. recessed in wall with rag bolts i/c bonding to earth& necessary connections, as per HSR 31.41 (C.P.@ 10%)
iii) 12-way , SP&N ( Horizontal)
16
19536
1110
V) 4-way , TP&N ( Horizontal) (8+12)
1
1837
1670
Supply and erection of 50mm diameter 1.5mtr. Long GI bracket (B-Class) making an angle 10 to 15 degree with horizontal plane for mounting street light fitting on GI bracket on wall with 2 Nos. 50mmx3mm thick MS flat including cost of cutting welding of GI pipe complete with cement sand mixture bolts and nuts etc. including making necessary connection with all labour and material required to complete the job in all respect up to the entire satisfaction of Engineer-in-charge of the work. (HSR 31.53) (CP 0%)
10
6000
600
P/F Modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect. HSR 31.56(C.P.@ 0 %)
10 amp 1 way switch
159
13833
87
10 amp socket
159
16854
106
Call bell Ding-Dong
17
1683
99
Fan regulators
57
22629
397
P/F GI concealed sheet metal boxes with inner and outer face plate i/c concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required to complete the job in all respect as per HSR 31.57(C.P@0%)
1 & 2 Modules
103
10403
101
Supply, installation,testing and commissioning of wall / free standing floor mounting dust and vermin proof compartmentalized cubical panel made out of 2 mm thick CRCA sheet, required hardware 3mm thick bakelite sheet provided all along the bus bar and cable alley separating switches compartment and supporting suitable channel duly painted by 2 coat of Zinc / Red oxide primer followed by 2 coats of powder coating in grey or required shade after rinsing. The panel having PU/ Neoprene rubber gasket of not less than 3mm thickness separate detachable gland plate MS base channel hinged door with inter locking arrangement for equipment / switch wear.Transparent acrylic sheet shall be provided in front of bus bar compartment to prevent direct access to bus bar bakelite sheet 3mm thick for separately cable alloey to BBC from switch chamber extended solid copper bars up to cable alleys shall be provided for outgoing connection which shall be paid as extra items. Side walls and cable alley compartments shall be having bolted type doors with detachable extension type structure. The panel will be complete with control wiring ( copper) and fuse protection (Only outer area on all sides shall be measured) as per HSR 31.63 (C.P @ 0%)
8
17280
2160
Supplying and fixing of copper bus bar duly tinned by means of SMC/ DMC type insulator high tensile nuts and bolts spring washers fixing to same in existing panel including bending, cutting in required shape and size and insulation with colour coding heat shrinkable PVC insulation complete in all respect as per HSR 31.64 (C.P @ 0%)
45
23625
525
Pdg. and fixing digital metering equipment for LT cubical Panel consisting of 96mmx96mm 0-500V, volt meter with selector switch, Amp. meter (of required ratio up to 600/5 amp.) with selector switch and required C.Ts 3 Nos., a set of 3 no phase indicating lamps RYB LED. (HSR 31.65) (CP 0%)
1
4050
4050
Supply & fixing of rotary handle for on / off operation of existing MCCB in the LT panel including fixing the same in position with all labour and material required to complete the job in all respect. (HSR 31.66) (CP 0%) up to 125A MCCB
2
1350
675
Above 125A MCCB
1
790
790
S/E of mark double walled corrugated (DWC) HDPE pipe laid 1 mtr. below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-incharge of the work. (HSR 31.67) (CP 0%) HDPE pipe 90 / 75mm outer dia / inner dia.
1600
216000
135
Supply & Erection of Hot Dip Galvanized octagonal pole of 3 mm thickness, with base plate including cost of nut and bolts and all accessories as supplied by the manufacturer including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 pole natural links including connection etc. with suitable connecting arrangment for 2 no. MCBs / kit kat including cost of R.C.C. 1:1.5:3 for foundation of size 0.7 M. x 0.7 M. x 1.8 M with minimum 8 Nos. 12mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C. for fixing the pole with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineerin-charge of the of the work. (HSR 31.68) (CP 0%) i) 7 Mtr. Long pole with top dia 70mm and botom dia 130mm with base plate of size 220 x 220 x 12mm.
10
139400
13940
Supply and erection of moulded case circuit breaker single pole/4 pole on wall / on existing pedestal including bonding to earth and making necessary connections required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work per HSR 31.69 (C.P @ 0%)
vii) 4 pole MCCB 300 amp to 400 amp
1
21172
21172
Supply and laying of multicore telephone cable conductor of size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/ channel and making necessary connections, complete in all respect upto the entire satisfaction of the Engineer-in-charge of the work. HSR 31.78 (CP 0%)
i) 2 pair telephone wire
830
6590
7.94
TOTAL E.I. (HSR PART) Internal
-
-
-
E.I. (N.S. PART)
-
-
-
Wiring with 1.5 sqmm PVC insulated copper conductor cable in 25 mm dia P.V.C. Conduit pipe, heavy gauge, ISI marked (recessed type) including cost of PVC pipe, modular metal box of suitable size with modular inner & outer face plates,copper wire,switch and sockets(modular type)screws, making necessary connections & testing complete in all respect. (Space for 10 Amp. switch & socket may be kept in main switch boxes and no extra payment will be made for the same)
Fan point
(i) Medium
53
26500
500
(ii) Long
4
2792
698
Light Point
(i) Short
57
17385
305
(ii) Medium
125
59125
473
(iii) Long
69
46299
671
Twin control light point with two way 10 Amp. single pole switch.
(i) Short
18
6174
343
(ii) Medium
2
1090
545
(iii) Long
17
13294
782
Call Bell Point b) Medium point
1
488
488
a) Long Point
17
11662
686
5 Pin 10 AMP plug point including earthing the 3rd pin with 1.50 sqmm copper insulatd earth wire.
a)Short point
36
16668
463
b) Medium point
55
36575
665
c) Long Point
87
78474
902
5 Pin 20 AMP switch & 16 Amp socket including earthing the 3rd pin with 1.50 Sqmm copper insulated earth wire. (wiring with 4 Sqmm copper wire)
a) Short point
1
674
674
b) Medium point
5
5090
1018
c) Long Point
87
123540
1420
S/E PVC pipe ISI Marked heavy guage i/c bend inspection box etc., i/c laying of pipe in slab or wall complete with all patty material required to complete the job in all respect. (Recessed Type)
(i) Size 25 mm dia
1243
55935
45
(i) Size 25 mm dia (Surface Type)
50
2000
40
(ii) Size 32 mm dia
100
5200
52
S/E 250mm dia PVC body exhaust fan with louver shutter of suitable size for single phase AC 230 volts 50 Hz, 1210 RPM and capacitor run, complete in all respect. (Model - Ventilair DX in Havell's Make and Brisk AIR in Crompton greaves make)
51
75990
1490
Supply & erection of 1200 mm sweep, A.C. Ceiling fan (5 star rating), capacitor type, copper wound, double ball bearing complete with 300 mm down rod, canopies, shackles, three nos. blades made of aluminium alloy suitable for single phase A.C. 230 Volts, 50 HZ supply but without regulator. (Ordinary type, white colour)
53
68900
1300
Supply and erection of TV socket / RJ-11 Telephone Jack single shutter one module, complete in all respect including making necessary connections and labour etc.
69
7935
115
Supply and erection of co-axial TV cable (RG-6) with electrolytic grade solid bare copper conductor, gas injected physical foamed polythylene insulation, screened with laminated aluminium tape & aluminium alloy wire braided, jelly flooded & UV grade PVC jacketed in existing pipe, complete in all respect including making necessary connections and labour etc.
1910
36290
19
Supply and erection of Street light LED luminaire 45 watt, suitable for operation on 230 Volts A.C. supply.
10
45780
4578
Supply and Erection of 3 phase automatic street light controller with timer switch ,operation ON & Off ,setting upto 24 hours at individual phase,complete with 32/63 amp contactor & M.S. powder coated enclosure of suitable size. The work will be complete in all respect including wiring ,making necessary connections,earthing,nuts &bolts and other petty material required to complete the job.
1
8000
8000
Supply & erection of L.T. energy meters Panel made out of 16 guage CRCA sheet with double shutter and locking arrangment consisting of legs of M.S angle iron of size 50mmx50mmx6mm, 0.90mtr hight embeded in C.C. Block 1:2:4 projected 100 mm all around the panel 600 mm depth, 1 no 4 pole MCCB of 160 amp, 25 KA breaking capacity, 4Nos. Aluminium busbar of size 38mmx6mm, internal wiring, hollock wooden board 20mm thick for fixing of energy meters and MCB, complete in all respect with all labour, petty material, painting and making necessary connections etc. (Design as approved by DHBVN/UHBVN). i) For 8 No's energy metre (App. size 48" x 52" x 16" depth)
1
22387
22387
ii) 12 No's energy metre (App. size 60" x 66" x 16" depth)
1
28280
28280
Supply and erection of RJ-45 computer Jack for CAT-6 cable, one module, complete in all respect including making necessary connections and labour etc.
17
7123
419
S/E of 4 pair UTP ( Unsheathed Twisted Pair ) Cat - 6 cable of approved make in existing pipe, complete in all respect including all labour, material and making necessary connections etc.
830
20750
25
TOTAL E.I. (NS PART)
-
-
-
Fire Fighting System
-
-
-
HSR PART PROVIDING AND FIXING HDPE water storage tank of Sintex, Diplast, O.K., Supreme make with cover / lids marked with ISI 12701 on roof top of building i/c cost of hoisting and placing in position, making connections with inlet and outlet pipe, providing overflow and scour provision with suitable plug on scour pipe i/c cost of nipples, washers, flanges for connection in tank, complete in all respect. (HSR 30.119 + CP 0%) 1000 Ltrs
10
52630
5263
Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections (Make: Polycab/Finolex). (HSR 31.26 + CP 140%) (xli) 25 Sq. mm 4 Core Cable (Armoured)
300
40536
56.3
Supply and erection of Godrej Almirah typeM.S.pedestal made of 50 mm x 50 mm x 6 mm angle iron frame with 3.00 mm thick M.S.sheet covering including shutters with suitable hinges and locking arrangement with Godrej type handle including round bars . The top covering should have downward overhang of 75 mm on all sides of pedestal , having two sets of water proof ventilation holes of suitable size on the sides , at top and bottom , each set containing four Nos. holes to discharge the heat produced by the current . The shutters fixed with rubber gasket of superior quality and of suitable size to make it water proof . The pedestal duly painted both inside and outside with two coats of approved paint and primary coat and its legs are embeded upto the entire depth in 1:2:4 cement concrete block , projected 75 mm all around the pedestal and and 200 mm above the ground level including the cost of all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (HSR-31.33 + CP 250%) (ii) M.S.pedestal of size 750 mm wide , 900 mm high , 300 mm deep and bottom totally open , duly embeded in cement concrete block of size 900 mm x 450 mm x 200 mm above ground level duly plastered with 12 mm thick 1:4 cement plaster , having a base of size 1050 mm x 600 mm x 250 mm below ground level .
2
10444
1492
Supply and erection of moulded case circuit breaker single pole/4 pole on wall / on existing pedestal including bonding to earth and making necessary connections required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.69 + CP 0%) (iv) Four pole MCCB 6 to 63 amp of 25 KA breaking capacity. (L&T, ABB, Schneider, GE)
2
10304
5152
Total HSR Part
-
-
-
NS PART SITC of centrifugal,monoblock pump of cast iron body & cast iron impeller, carbon steel shaft horizontal end suction type delivering 450 LPM at a head of 30 mtrs. (not more than 7.5 HP) complete in all respect with the entire satisfaction of Engineer-In-charge. (Make Kirloskar Model KDS 830+). (NS item)
2
120000
60000
Fabricating ,supplying, installation, testing and commissioning of suitable size outdoor floor mounted compartmentalized cubicle panel ,fabricated from 2 mm thick CRCA sheet with sloped roof and partitions with stiffeners whenever required dust and vermin proof, powder coated of approved shade after seven tank process with suitable electrolytic grade high conductivity copper bus bar, suitable operation on 3 phase 415V, 50Hz AC supply. INCOMING SANCTION : i) 63 Amps FP MCCB 25 KA (lcs) panel mounting type-1 no. ii) 0-63 Amps. Digital Ammeter with CTs -1 set iii) 0-500 Volts Digital Voltmeter and protection fuses-1 set iv) 100 Amps, 4 strip copper bus bars of suitable length - 1 set v) Phase indicating lamps with control switch and protective fuses-3 nos. OUTGOING SANCTION: i) Terrace pump section comprising of 32 Amp 25 KA (lcs) TPMCCB panel mounting type,1 no. DOL starter with OL and UV protection. Current sensing types single phasing preventer, indication lamps,ON/OFF push button, auto manual selector switch, ammeter with selector switch ,ammeter with selector switch and CTs, necessary inter locks complete suitable for automatic operation etc. as required-1 set(start& stop push button fround floor-1 set) ii) Control section having control components integrating the terrace pumps so as to satisfy the functional requirements visual/audio alarms, necessary instrument , indicating lamps, push buttons, fuse terminal blocks atc. and other accessories as per specification-1 set (for one pumps)(CPRI APPROVED Panel). (NS item)
2
72000
36000
SITC of ''C'' class mild steel black pipe (heavy duty) IS:1239 on wall /surface as required complete in all respect with the entire satisfaction of Engineer-In-charge. (NS item) 100mm dia(Make: Jindal Hisar/Tata )
200
300000
1500
SITC of butterfly valve PN 1.6 with Bronze/gun metal seat complete in all respect with the entire satisfaction of Engineer-In-charge. (NS item) 100 mm dia (make: Castle/Advance)
6
25200
4200
SITC of dual plate non return valve complete in all respect with the entire satisfaction of Engineer-In-charge. (NS item) 100mm dia (Make: Castle/ Advance)
4
18000
4500
Supply and installation of first aid hose reel with MS construction full swing type with 30 mtr long 20mm dia made with thermo plastic synthetic reinforced metal pipe with shut off nozzle as per IS: 12585 complete in all respect with the entire satisfaction of Engineer-In-charge .(Make:Omex/Lifeguard). (NS item)
12
96000
8000
Supply and installation of pressure switch as required and desired by the Engineer-In-charge. (NS item)
2
4800
2400
Supply and installation of pressure gauge as required and desired by the Engineer-In-charge. (NS item)
4
7200
1800
Providing and fixing of 4.5 kgs capacity CO2 gas type ISI marked fire extinguisher IS:15683 complete as required complete in all respect with the entire satisfaction of Engineer-In-charge.(Make:Omex/Lifeguard). (NS item)
12
91200
7600
Providing and fixing of 6 kgs capacity ABC stored pressure type ISI marked fire extinguisher IS:15683 complete in all respect with the entire satisfaction of Engineer-In-charge (Make: Omex/ Lifeguard). (NS item)
12
33600
2800
S/E of sheet steel enclosure suitable for 3/4 pole, 63 amp, MCCB on wall/pedestal with nuts & bolts including bonding to earth, complete in all respect. (NS item)
2
2194
1097
Total NS F.F
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements