Haryana Police Housing Corporation Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 4,46,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2018_HBC_64096_1Bid Award Id
ViewTender No
2018/APRIL-8/ 8Tender Authority
Haryana Police Housing Corporation ViewPurchaser Address
-Website
http://https://hphc.org.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Shuttering for faces of concrete foundations and foundations beams (vertical or battering) (HSR 9.13 +CP 400%)
514.43
78836
30.65
Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth. as per HSR 10.26. (CP @450%)
73.08
120662
300.2
Cement concrete 1 : 8 : 16 with stone aggregate 40 mm Nominal size in foundation and plinth. as per HSR 10.28. (CP @450%)
308.11
539985
318.65
Cement concrete 1 : 6 : 12 with stone aggregate 40 mm Nominal size in foundation and plinth. (HSR 10.32+CP 450%)
74.34
142388
348.25
Cement concrete 1 : 4 : 8 with stone aggregate 40 mm Nominal size in foundation and plinth. as per HSR 10.39. (CP @450%)
54.38
120563
403.1
Cement concrete 1 : 1 ½ : 3 with stone aggregate 20 mm nominal size in foundation and plinth. as per HSR 10.42. (CP @450%)
2nd storey
0.52
2009
702.5
3rd storey
0.98
3831
710.8
4th storey
0.12
474
719.1
Cement concrete 1 : 8 : 16 with brick ballast 40 mm nominal size in first storey upto 4 metres above plinth level. as per HSR 10.44. (CP @450%)
1st storey
4.83
8140
306.45
2nd storey
1.45
2464
309
3rd storey
0.66
1130
311.55
Cement concrete 1:1 1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work but excluding steel-reinforcement centring and shuttering in foundation and plinth. as per HSR 10.79+10.95. (a) (CP @450%)
125.17
490647
712.7
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in shelves excluding steel reinforcement, but including centering and shuttering, laid in position, complete in all respects. as per HSR 10.81+10.95. (a) (CP @450%)
1st storey
1.47
8364
1034.6
2nd storey
2.19
12549
1041.9
3rd storey
0.61
3520
1049.2
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in slabs with inclination not exceeding 25 degree with horizontal, excluding steel reinforcement, but including centering and shuttering , laid in position, complete in all respects.extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4. as per HSR 10.82+10.95. (a) (CP @450%)
1st storey
85.89
512454
1084.8
2nd storey
60.86
365558
1092.1
3rd storey
2.91
17595
1099.4
Cement concrete 1:1 1/2:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls exceeding 20 cm thickness (straight and curved) beams, girders, stairs, columns, (square or rectangular) battens and lintels etc. excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4 as per HSR 10.86+10.95. (a) (CP @450%)
1st storey
256.34
1675982
1188.75
2nd storey
55.81
367133
1196.05
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for walls (10 cm to 20 cm thickness) straight and curved excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects.as per HSR 10.87+10.95. (a) (CP @450%)
4.37
35737
1486.9
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work for circular or curved columns excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects. as per HSR 10.88+10.95. (a) (CP @450%)
1st storey
2.55
18975
1352.95
2nd storey
2.11
15785
1360.25
First class Brick works laid in cement sand Mortar 1:4 in Foundatin and plinth ( HSR 11.4 ) CP 600%
131.81
391765
424.6
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in fascias parapets and other thin vertical sections, not covered by Item Nos. 10.82, 10.86 to 10.88 not exceeding 10 cm thickness excluding steel reinforcement but including centering and shuttering, laid in position, complete in all respects., as per HSR 10.89+10.95. (a) (CP @450%)
1st storey
0.57
5357
1708.95
2nd storey
3.76
35492
1716.25
3rd storey
1.52
14408
1723.55
Cement concrete 1:1.5:3 with stone aggregate 20 mm nominal size for reinforced concrete work in footings, strips, foundations, beams, rafts, pedestals and approach slabs of bridges etc., excluding steel reinforcement as per HSR 10.90+10.95. (a) (CP @450%)
194.18
826624
774
First class brick work laid in cement sand mortar 1:6 in foundation and plinth. As per HSR 11.2. (CP @ 600%)
72.42
199455
393.45
First class brick work laid in cement sand mortar 1:4 in foundation and plinth. As per HSR 11.9. (CP @ 600%) 1ST STOREY
296.7
925466
445.6
Providing and laying autoclaved aerated (Cellular) Concrete light weight blocks ( As per IS :2185,Part 3 having density of 550 to 650 kg/sqm and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using 100 mm thick AAC blocks complete in all respec (as per HSR item 11.104(ii )+11.41 CP 0%) with polymer modified adhesive of reputed make as approved by Engineer - in - Charge 1st Storey
175.76
84391
480.15
2nd storey
300.16
146117
486.8
3rd storey
14.85
7327
493.45
Providing and laying autoclaved aerated (Cellular) Concrete light weight blocks ( As per IS :2185,Part 3 having density of 550 to 650 kg/sqm and compressive strength of 4.0 N/mm2 masonary in non load bearing walls using more than 100 mm thick AAC blocks complete in all respec (as per HSR item 11.105(ii )+11.41 CP 0%) with polymer modified adhesive of reputed make as approved by Engineer - in - Charge 1st Storey
142.16
586978
4129
2nd storey
93.26
390456
4186.75
3rd storey
47.87
203184
4244.5
Dressed or moulded two brick cornice laid in cement sand mortar 1:4 including 12 mm thick cement plster 1:4 or pointing, as required.. As per HSR 11.77. (CP @ 600%)
2nd storey
42.13
4807
16.3
3rd storey
132.35
15286
16.5
4th storey
21.2
2478
16.7
Terracing consisting of tiles 22.86 cm X 11.43 Cm X 3.81 cm laid over 87.50 mm mud filling on a layer of 25 mm mud plaster and on other layer of mud mortar for laying the tiles, including two coats of bitumen laid hot at 1.65 kg per sqm on top of R.C.C slab including grouting with cement sand mortar 1:3 and top surface to be left clean etc.. As per HSR 13.13. (CP @ 0%) 1st Storey
180.86
67035
52.95
2nd storey
259.1
97849
53.95
3rd storey
17.41
6696
54.95
Supplying and fixing in position G.I. pipe Class ‘B’ spouts in chajjas and cantilevers As per HSR 13.55. (d) (CP @ 240%)
d) 40 mm internal dia, G.I. pipe
2.12
425
59
Cement concrete 1:1.5:3 gola 10 cm X 10 cm quardrant along junction of roof with parapet wall finished smooth, where specially specified. As per HSR 13.64. (CP @ 240%)
246.93
5062
6.03
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. As per HSR 13.89. (CP @ 20%)
a) 100mm dia PVC pipe 6kg pressure]
92.86
20280
182
b) 150mm dia PVC pipe 6kg pressure
152.84
61744
336.65
Providing and fixing PVC bend ISI mark. As per HSR 13.90. (CP @ 20%)
a) 100mm dia PVC bend
23
2688
97.4
Base course of floors consisting of 100 mm thick cement concrete 1:8:16 and 100 mm sand or stone filling. As per HSR 14.1. (CP @ 400%)
549.66
101549
36.95
Screed of 50 mm thick cement concrete 1:8:16 to be laid below the topping As per HSR 14.4. (CP @ 400%)
496.75
38125
15.35
Conglomerate floor 25 mm thick cement concrete topping 1:2:4 As per HSR 14.8. (CP @ 400%)
1st storey
402.06
45030
22.4
2nd storey
236.07
26793
22.7
Conglomerate floor 50 mm thick cement concrete topping 1:2:4 As per HSR 14.10. (CP @ 400%)
92.65
17418
37.6
Precast chequered tiles of 20 mm thickness In ordinary grey cement without chips laid on 20 mm thick bed of cement coarse sand mortar 1:3 with neat cement slurry between joints and over the base in floors, treads of steps and landings. As per HSR 14.45.+ Note (CP @ 400%)
6.51
3628
111.48
Kotah stone flooring 25m thick in any pattern as specified over 12 mm thick base of cement coarse sand mortar 1:3 laid and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing and polishing. As per HSR 14.62. (CP @ 250%)
1st storey
205.64
145351
201.95
2nd storey
262.09
185526
202.25
Kotah stone 20 mm thick in skirting risers of steps, dados, pillars and wall facing (lining) in any pattern laid on 12 mm thick cement coarse sand plaster 1:3 laid and jointed with neat cement slurry, mixed with pigment to match the shade of stone including rubbing and polishing including labour for fixing cramps, dowels and pins etc. As per HSR 14.66. (CP @ 250%)
1st storey
11.45
9497
237
2nd storey
14.03
11652
237.3
Providing and fixing P.V.C strips, 40 mm Wide in floors., As per HSR 14.81. (a) (CP @ 400%)
a) 4 mm thick
60.8
1444
4.75
Providing and fixing vitrified tiles of size 600x 600mm of approved make in flooring laid in any pattern as spcefied over base of 20mm thick cement coarse sand mortar 1:3 and jointed with while cement slurry mixed with pigment to match the shade to tiles. NOTE:- Tile shall be of premium quality(first qualit) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. As per HSR 14.89. (CP @ (-) 15%)
463.16
363883
924.3
Providing and fixing Vitrified tiles of size 600x600mm of approved make in skirting /dado laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to matyh the shade to tiles. NOTE:- Tile shall be of premium quality(first quality) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. As per HSR 14.90. (CP @ (-) 15%)
44.54
35201
929.8
Providing and fixing ceramic tiles/ anti skid tiles of size of size 400mm x 400mm or above size of approved make in floors, laid in any pattern as specified over base of 20mm thic cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of tiles. NOTE:- Tile shall be of premium quality(first qualit) of reputed manufacturer like NITCO, KAJARIA, SOMANI, ORIENT, JOHNSONS & RAK. As per HSR 14.91. (CP @ (-) 15%)
81.88
43429
624
Providing and fixing 1st quality ceramic glazed wall tiles confirming to I.S 15622 (thickness to be specified by the manufacture) of approved make in all colors, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge in skirting, risers of steps and dados over 12mm thic bed of cement mortar 1:3 coarse and jointed with grey cement slurry, including pointing in white cement mixed with pigment of matching shades complete. a) size of ceramic Glazed tiles 300mmx 450mm As per HSR 14.92. (CP @ 0%)
26.13
13110
501.75
b) size of ceramic Glazed tiles 300mmx 450mm
282.89
183355
648.15
12 mm thick cement plaster 1:4 As per HSR 15.5. (CP @ 500%)
1st storey
2705.76
206178
12.7
2nd storey
546.42
42227
12.88
3rd storey
279.64
21912
13.06
12 mm thick cement plaster 1:6, on walls As per HSR 15.7. (CP @ 500%)
1st storey
430.54
27511
10.65
2nd storey
382.54
24857
10.83
3rd storey
43.35
2863
11.01
15 mm thick cement plaster 1:4 on the rough side of single or half brick wall As per HSR 15.10. (CP @ 500%)
1st storey
1652.44
155164
15.65
2nd storey
34.27
3254
15.83
3rd storey
188.07
18066
16.01
4th storey
19.77
1920
16.19
15mm thick cement plaster in 1:6 As per HSR 15.12. (CP @ 500%)
1st storey
679.06
53374
13.1
2nd storey
592.98
47248
13.28
10 mm thick cement plaster 1:4 As per HSR 15.52. (CP @ 500%) (Underside of ceiling)
1st storey
727.76
55236
12.65
2nd storey
507.13
39038
12.83
3rd storey
18.11
1413
13.01
20 mm thick raised or sunk cement mortar band/drip course in cement mortar 1:4 As per HSR 15.79. (CP @ 500%)
186.61
503
0.45
Preparation of ply wood surface for painting including sand papering the surface and applying filling with approved quality filler consisting of white lead, linseed oil, varnish and chalk mitti including finishing the surface to required finish complete.As per HSR 16.1. (CP @ 230%)
403.97
6132
4.6
Applying pink primer or aluminium priming coat on wood work including preparation of surface, knotting and stopping etc. 1st quality As per HSR 16.2. (CP @ 230%)
403.97
4999
3.75
Painting two coats excluding priming coat with synthetic enamel paint in all shades on new wood work or metallic or plastered or concrete surfaces to give an even shade. As per HSR 16.3. (CP @ 230%)
619.03
19202
9.4
Applying priming coat with metal primer on New steel or iron work including preparation of surface. As per HSR 16.9. (CP @ 230%)
33.76
350
3.15
Distempering with washable oil bound distemper (of approved manufacture) two coats on new work. As per HSR 16.58. (CP @ 230%)
3370.16
101205
9.1
Pdg. Two coats of exterior acrylic emulsion paintAs per HSR 16.79. (b) (CP @ 0%) b) 1st quality
5064.45
246891
48.75
Providing and applying two coats white cement based putty over plastered surface and grinding the surface smooth with sand paper to get an even and smooth finish including cost and carriage of all material, labout charges, scaffolding, sundries etc. Complete (J.K. / Birla make) as per HSR 16.81 (b) (CP @ 230%) b) 1st quality
8436.6
315992
11.35
Supplying and fixing hydraulic door closer, I.S.I mark, with necessary Screws, etc. complete As per HSr 17.82 CP 300% C) ISI designation no. III ( size of door 851 mm to 1000 mm )
31
26846
216.5
Factory manufacture solid flush door and Shutters, with block board core as per I.S. No. 1659-1969 bonded with water poof type phenol formal dehyde synthetic resin, hot-pressed, conforming to I.S. 2202 part I and II, fixed in positon includeing iron hinges, screws, chocks/cleats and stops etc. (excluding the cost of any fittings other than specified above, but including labour for fixing the same in position)- as per HSR 17.93. (a) - 17.18. Note (i) (CP @ 165%)
commercial veneering with vertical grains or corss bands and face veneer on both sides commercial facing with laminated core and lipped edges:-
30 mm thick
92.83
101142
411.15
25 mm thick
81.14
83245
387.15
P/F aluminium works for doors & windows ventilators & partition with extruded built up std. tubular sections / appropraiate Z section and other sections of approved make conforming to IS, 733 and IS :1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fastners i/c necessary filling up of gaps at junctions, at top, bottom and sides with reqd. neoprene felt etc. aluminium sections shall be smooth, rust free straight mitred and jointed mechanically wherever reqd. i/c cleat angle. Alumin snap beading for glazing / pancilling C.P. brass / stainless steel screws etc. complete. Shutters of doors, windows & ventilators i/c P/F hinges / pivots and making provision for fixing of fittings wherever reqd. i/c the cost of PVC / neoprene gasket reqd. i/c aluminium fitting as per HSR 17.96. + Note (i) (CP @ 15%)
803.88
248402
268.7
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particles board conforming to IS : 12823 grade 1 type II in paneling fixed in aluminium doors, windows shutters and partition frames with CP brass / stainless steel screws etc. complete. as per HSR 17.97. (b) (CP @ 5%)
(b) Pre-laminated particle board with decorative lamination on both sides.
16.84
13797
780.3
Providing and fixing glazing in aluminium door, windows, ventilator shutter and partitions etc. with PVC / neoprene gasket etc. complete (cost of aluminium snap beading shall be paid in basic items.) as per HSR 17.98. (CP @ 15%
(b) With float glass panes of 5.0 mm thickness.
107.38
86440
700
Iron-grated doors, including pintle
hinges and arrangements HSR 18.11 CP 500%
11.52
84644
1224.6
Wrought iron and mild steel (using angles, flats square bars, tees and channels) ladders, grills, gratting frames, window guards, iron doors openable or fixed stair case or parapet or any other type of railing, gates and tree guards etc., including cost of screws and welding rods or bolts and nuts complete fixed in position. as per HSR 18.12. (CP @ 500)
33.13
206800
1040.35
Fe-500 D TMT steel bars for RCC, works, where not including in the complete rate of RCC including bending, binding and placing in position complete. As per HSR 18.22. (CP @ 500%)
909.17
5002526
917.05
Pressed steel sheet frames ( chowkats), consisting of 2mm thick steel sheet of the specified section, including iron lugs ( hold fasts), iron hinges , confirming to P.W.D. specifications, including bolts for fixing stops, locknotch, provision for receiving tower bolts, and finished with one coat of ready-mixed paint red lead non-setting primer, of approved quality, fixed in position including the cost of cement concrete 1;3:6 for filling in the frame, and cement conc. for lugs complete. as per HSR 18.34. (CP @ 500%)
(b) 76x38mm with 35 mm wide single rebate.
321.18
112926
58.6
( c) door and window frame size 127 mm X 50 mm with 40 mm wide double rebate
856.37
394615
76.8
d) door and window frame of size 114 mm X 50 mm with 40 mm wide double rebate.
131.43
55003
69.75
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed (HSR 24.1+CP 370%)
1305.69
5673
92.45
Stair case railing of 40 mm internal
dia G.I. pipe class 'B' as per I.S. No.
1239 as hand rail using flats and
square bars as supporting members
and base plate welded as per design
specified including cutting, welding
rods and complete fixed in position HSR 18.13 a CP 500%
3.5
24297
1157
Parapet railing of 40 mm internal dia
G.I. Pipe class 'B' as per I.S. No.1239
as hand rail using flats and square
bars as supporting members and
base plate welded as per design
specified including cutting, welding
rods and fixed in position complete in
all respect. HSR 18.13 b CP 500%
0.5
3693
1231
TOTAL CIVIL (HSR PART)
-
-
-
CIVIL (NS PART)
-
-
-
Earth Filling with the earth brought from outside the campus irrespective of any lead, including laying in 15cm layers, watering, compacting and consolidating complete in all respect & to the full satisfaction of engineer in charge.
1426.45
269599
189
Providing & Fixing 25mm thick finished red sand stone both sides slightly rounded for partition and shelves in CB.
37.37
28176
754
Cutting chases in brick/concrete wall for providing skirting flush with plaster
399.73
10572
26.45
Providing & Fixing best quality dark Baroda Green Marble Stone 15mm to 17mm thick in flooring treads of steps etc. including matching grains of marble laid in any pattern
121.43
158660
1306.6
P & Fixing 6mm thick glass in aluminium door and window shutters & paritationwith PVC neoprene gasket etc complete
51.25
55093
1075
Providing & Fixing aluminium fittings for door and windows shutters with stainless steel or C.P brass screws of required size complete.
sliding bolt 150x12mm
33
5016
152
sliding bolt 250mm
42
7946
189.2
sliding bolt 300mm
6
1386
231
tower bolt 100mm
48
2361
49.2
tower bolt 150mm
253
16267
64.3
tower bolt 200mm
136
10356
76.15
Handle 100mm
67
3021
45.1
Handle 150mm
292
14921
51.1
Hasp & staples
55
1540
28
Door stopper
74
2812
38
Folding handle
55
4675
85
P & F 300x300x10mm thick johnson endura make industrial tile in floors laid in pattern complete as specified over 20mm thick cement sand motar 1:3
28.26
29673
1050
P & F S.S 304 grade hinges 100mm long with ball bearing fixed completet ISI Marked
30
840
28
P & F 304 grade Stainless steel wire mesh jali of 22 gauge fixed in aluminium Door & Windows
53.69
42952
800
P & F S.S rod 25mm dia in cupboards i/c cost complete fixed in posistion
24.59
6688
272
Extra for Granite polish on Kota stone flooring to the entire satisfaction of Engineer in Caarge
490.07
24013
49
Providing & Fixing RCC cover of size 1'-6"x2'-0"
3.62
8079
2232
Applying priming coat with exterior primer complete in all respect
5064.43
130155
25.7
Providing multicolour flex printing star media with installation 1" square iron pipe frame complete
10.98
5380
490
TOTAL CIVIL (NS PART)
-
-
-
PH (HSR PART)
-
-
-
Excavation of trenches in streets, lanes or in Open areas for storm sewer, sewers running by Gravity nd manholes to full depths as shown In drawings including shoring timbering of Poling boards, frame System type, dressing to correct Sections and dimensions, according to templates and levels, Dewatering, provision for diversion of traffic, cutting trees and Bushes etc. Night signals, profiles, pegs, sight rails, oning rods,Crossing over trenches for access to the houses, watching fencing, Etc., fixing and maintenance of caution boards, refilling of trenches, Watering of refill, in 15 m layers, ramming and restoration of Unmetalled or unpaved surface to original condition and removal Of surplus soil from site of work, upto a lead of 1 Km in ordinary soil. as per HSR 6.10. (CP @ 370%)
87.11
7856
1919
Cement concrete 1 : 8 : 16 with brick ballast 40 mm Nominal size in foundation and plinth. As per HSR 10.26. (CP @ 450%)
5.81
9592
300.2
Cement concrete 1; 2 ; 4 with stone aggregate 20 mm nominal size in foundation and plinth. As per HSR 10.41. (CP @ 450%)
9.39
31792
615.6
Cutting holes upto 23cm through stone masonary or brick work in cement walls for pipesw and making good including repainting replastering and finishing according to existing finish where required. As per HSR 28.24. (CP @ 300%)
a) 11.43 cm thick brick wall
8
448
14
b) 22.86 cm thickness of walls.
14
1139
20.35
CONSTRUCTING BRICK MASONRY INSPECTION CHAMBER SIZES AS GIVEN BELOW UPTO 0.60 METRE AVERAGE DEPTH in cement Mortar 1:5 LIME CONCRETE with 40 percent lime mortar 2:3 in foundation Cement mortar 1:2:4 BENCHING 12 mm THICK CEMENT PLASTER 1:2 with a floating coat of 1 mm thick of neat cement R.C.C 1:2:4 SLAB 100 mm THICK/CC/ TOPPING 50 mm THICK WITH 455 MM x 455 MM X 610MM INSIDE LIGHT DUTY C.I. INSPECTION CHAMBER COVER AND FRAME Weight as per I.SI. specification painted WITH 3 COATS OF black bitumastic superior paint complete as per standard design as per HSR 29.84. (CP @ 450%)
c) Size 600 mm x 900 mm inside (with 455 mm x 455 mm cover and frame light duty single seal weighing 20 kg with C.C. topping )
8
30360
690
Providing salt glazed SW pipe grade 'A' length of 600mm each pipe marked with 15:651 & their lowering, cutting complete. As per HSR 29.85. (CP @ 450%)
c) 600 mm x 900 mm
4
10193
139
Providing SALT GLAZED STONE WARE PIPES GRADE 'A' IN STANDARD LENGTH OF 600MM EACH PIPE MARKED WITH IS:651 and their lowering, cutting, jointing and testing as described in HSR item No. 29.38,29.39,29.40 including the cost of jointing materials as well as carriage, loading, unloading, stacking, handling, re-handling etc. complete in all respects to the satisfaction to the Engineer-in-Charge. as per HSR 29.95. (CP @ 5%)
150mm i/d
150.38
31421
199
PROVIDING AND FIXING IN POSITION BESTINDIA MAKE LARGE FLAT BACK or Angular lipped from Urinal 610 MM HIGH consisting of: as per HSR 30.25. (CP @ 340%)
7
31231
1014
Providing and fixing 25 mm thick marble backs for the different type of urinals. As per HSR 30.40. (CP @ 340%
b) VITREOUS CHINAWARE PARTITION PLATE
I) SMALL SIZE 680 mm x 330 mm
i) White
4
3520
200
PROVIDING AND FIXING IN POSITION INDIAN MAKE (ORDINARY) LAVATORY SUITES Consisting of as per HSR 30.41. (v) - 30.45. (CP @ 340%)
Lavatory in VITREOUS CHINAWARE size as given Below (to the approval of the Engineer-in-charge) including china plug for tap hole where necessary;
R.S or C.I BRACKETS for building into wall including Painting;
32 mm C.P BRASS WASTER WITH C.P brass chain and rubber plug;
15 mm C.P BRASS SCREW DOWN PILLAR TAP WITH Jamnuts or couplings best design ( as approved by the Engineer- In-charge)
ALL FITTINGS BEST INDIAN MAKE and; to the approval of the Engineer-in-charge.
ALL brass work chromium plated and COMPLETE in all respects INCLUDING cutting and MAKING GOOD THE WALLS FLOORS AND PAINTING OF FITTINGS ETC.
WHITE
(v) Size 560 mm x 450 mm with one no. tap
1
1685
383
PROVIDING AND FIXING LEAD INLET CONNECTION WITH BRASS UNION FOR FLUSHING AND WARNING PIPES COMPLETE IN ALL RESPECTS. As per HSR 30.93. (CP @ 300%)
c) 15 mm alkahene pipe inlet connection
24
1008
10.5
CUTTING CHASE IN BRICK WALLS IN CEMENT OR IN FLOOR FOR EMBEDDING G.I OR H.C.I PIPE LINES AND MAKING GOOD THE SAME TO ITS ORIGINAL CONDITION as per HSR 30.95. (CP @ 340%)
c) Size 75 mm x 50 mm
140.61
2474
4
PROVIDING AND FIXING IN POSITION AUTOMATIC BRASSBALL VALVES IN TANKS as per HSR 30.110. (b) (CP @ 340%)
b) WITH PLASTIC BALL
ii) 20mm internal diameter
6
1267
48
PROVIDING AND FIXING IN POSITION PVC GULLY TRAPS FIXED IN CEMENT CONCRETE 1:4:8 complete WITH H.C.I GRATING 150 MM X 150 MM CAST IRON COVER WEIGHING APPROXIMATELY 7.26 KG AND FRAME CLEAR OPENING 300 MM X 300 MM and outside size 330 mm x 330 MM AND CHAMBER INCLUDING cost of all brick work in CEMENT MORTSAR 1:5 CEMENT CONCRETE 1:8:16 IN FOUNDATIONS AND CEMENT CONCRETE 1:2:4 IN COPING around C.I cover and frame etc. WITH THREE COATS of black bitumastic superior PAINT of approved manufacture on all C.I work AS PER STANDARD DESIGN, minimum depth of water should be 150 mm with a minimum seal 50 mm. as per HSR 30.114. Dvd (CP @ 0%) 100 mm internal diameter PVC gully trap
6
5871
978.6
providing and fixing HDPE WATER STORAGE TANKS of Sintex, Diplat, O.K. Supreme make with cover/lids marked with IS 12701 on roof top of building including cost of hosisting and placing in position making connections with inlete and outlet pipes, providing overflow and scour provisions with suitable plug on scour pipe including cost of nipples washers, flanges for connections in tanks complete in all respects to the satisfaction to the Engineer -In-Charge as per HSR 30.119. (CP @ 0%)
500 litre
4
10744
2686
1000 litre
1
5263
5263
TOTAL PH (HSR PART)
-
-
-
PH (NS PART)
-
-
-
P & Laying, Jointing, fixing and testing of G.I pipe line i/c coat of special. Complete in all respect P & F of GI pipes complete with GI fittings of
a) 15mm dia G.I pipe
117.56
21913
186.4
b) 20mm dia G.I pipe
105.15
23564
224.1
c) 25mm dia G.I pipe
105.48
26143
247.85
d) 40mm dia G.I pipe
96.52
38043
394.15
P & F in position GI hooks for GI Pipe
139
1390
10
Providing, Fixing and Jointing union coupling in GI pipe lines
a) 15mm dia
13
1053
81
b) 20mm dia
6
720
120
c) 25mm dia
12
1908
159
d) 40mm dia
6
1536
256
Providing & fixing and jointing Gun Metal pit valves/ball valves (heavy pattern) with hand wheels complete
a) 15mm dia
2
312
156
b) 20mm dia
2
520
260
c) 25mm dia
9
5076
564
d) 40mm dia
6
5101
850.3
P & F SWR PVC pipe classic 'B' specials ISI marked Fittings (Kisan, Prince, Finolex make)
a) for 110mm dia pipe
68.76
21724
315.95
b) for 90mm dia pipe
80.45
21021
261.3
Special For 110mm dia pipe
i) Bend
25
2671
106.85
ii) Socket
6
519
86.55
iii) Tee single Junction with door
6
1014
169.15
P & F of clamps of approved design ( M.S)
5
660
132
Special for 90mm dia pipeline
i) Bend
21
1909
90.95
ii) Socket
14
1020
72.9
iii) Tee single Junction with door
17
2362
138.95
iv) Floor trap
21
2285
108.85
P & F of clamps of approved design ( M.S)
16
1936
121
P & F in position 15mmx50mm long CP extension nipple
65
2691
41.4
P & F CP Flenge of required dia
55
1375
25
P&F in position best make 1st quality vitreous chinaware European type water closet suit white colour complete with 100mm dia PVC bends 32mm dia CP Flush valve and all others necessary fittings complete in all respect including cutting and making good the walls and floor paintings etc.
7
56700
8100
P & F in position CP jali (Brass) of heavy quality 100mm dia of standard make
33
6600
200
P/F in position UPVC waste pipe for seek oar W.H.B including PVC fitting complete DSR 17.28 32mm dia
15
1137
75.8
40mm dia
2
162
81.4
P & F in position best indian make Towel rails 18" Jaguar make Cat no. AIEC 1111 complete in all respect
3
2214
738
P & F in position 15mm dia C.P Brass bib cock of best quality
(C) Bib cock (jaguar make) Cat. No. 511
9
5904
656
(d) Long body
9
7776
864
P & F in position CP Brass stop cock a) (i) 15mm dia stop cock
24
14592
608
b) Concealed stop cock with Flange (jaguar make
9
7344
816
P & F in Position best Indian make CP Brass wall mixer (Jaguar make Cat no. Sat 520)
15 mm
4
9292
2323
P & F Piller cock (Jaguar make Cat. No. SAT 507) complete in all respect
6
4140
690
P & F Jet Spray (jaguar make) DSR 17.11.
7
1783
254.8
P & F Towel ring (jaguar make) Cat No. AEE 1121 complete
9
5706
634
P & F under counter Basin round (jaguar make Cat. No. WB02) complete
9
12960
1440
P & F in position best quality stainless steel sink (glossy) with complete fitting (Jayna make) sink 24"x18"x8" with drain board complete DSR 17.10.1.3
1
3772
3772.35
P & F waste coupling (ALE 544HT)
9
3096
344
P & F auto closing concealed urinal flush valve jaguar make Cat. No. FLV 073
7
16793
2399
P & F in position ordinary Lavatory suits central hale basin mixer with 'U' shaped around braided housed (jaguar make Cat. No. SAT-516)
3
6300
2100
P& F Indian make make 1st quality chinaware Orissa pan 32mm of flush pipe flush cock in wall complete in all respect
2
9000
4500
P & F 1HP Monoblock motor (crompton make) I/c all accessories complete in all respect
1
9717
9717
P&F 5mm Thick looking mirror with beveling edge complete in all respect
2.97
5464
1840
Extra for Providing opening of required size & shape for washbasin in granite stone counter
9
2619
291
TOTAL PH (NS PART)
-
-
-
ROAD AND PARKING PART (HSR+NS)
-
-
-
Cement concrete 1:1 ½:3 with stone aggregate 20 mm nominal size in pavements, roads, taxi-tracks and runways, laid to required slope and camber, including consolidation, finishing and tamping complete. extra over Item Nos. 10.79 to 10.94, if 1:1 ½:3 mix is used, instead of 1:2:4 as per HSR 10.132+10.95. (a) (CP @450%)
173.76
696977
729.3
Preparation of sub grade, including trenching, rough dressing of spoil final dressing of earth,to given levels and camber, watering, rolling with road roller, and compacting the bed as per HSR 24.1. (CP 370%)
1140.75
4956
92.45
Laying brick on end edging lengthwise 22.86 cm deep and 6.83 cm wide including excavation of earth and refilling the excavated soil and compacting along brick edging complete in all respect with other than brick soiling, as per HSR 24.6b (C.P.@370%)
559
2364
0.9
P/F Precast cement kerb stone of M-25 grade complete including jointing with CM 1:3 complete in all respect (NS)
1834
253092
138
Extra for Trimix on concrete pavement with vaccumm dewatering system complete in all respect (NS)
1140.75
68445
60
Providing 50mm x 4mm size groove as expansion joint in concrete pavement by mechanical cutter, complete in all respect. (NS item)
787.56
22051
28
Supplying, laying and consolidation of stone metal 63mm to 45mm, soling coat to water bound macadam specification caryying the metal from stacks, and spreading to templates, screening and spreading the binding material and consolidating the stone metal and binding material to proper camber,with road roller, excluding the cost of templates, barriers and lighting arrangement and Chowkidars, (NS)
130.26
136773
1050
Supplying, laying and consolidation of stone metal 53mm to 22.5mm wearing coat, to water-bound-macadam specification, including making side dowels,carrying the metal from stacks and spreading to templates, screening and spreading the binding material, and consolidating the stone metal and blinding material, to proper camber, with road roller, excluding the cost of templates, barriers, and lighting arrangement and chowkidars.(NS)
130.26
149799
1150
Supplying of First class brick from kilen at the site of work (NS)
4890.67
22008
4500
Total
-
-
-
Rain Water Harvesting Well
-
-
-
Providing and fixing PVC Rain water pipe 6kg Pressure of IsI mark in cement mortar during masonry work. (HSR 13.89-b+CP 240%) b) 150mm dia PVC pipe 6kg pressure
27.43
31396
336.65
Providing and placing in horizontal layers filtering media Screened, washed and cleaned as described below:- (HSR 28.50-(a),(b),(c)+CP 300%) Top Layer Fine sand screened, cleaned and washed and graded (effective size 0.2 to 0.4 mm with uniformity coefficient 2.0 to 3.0) from Ghaggar or other approved source.
3.89
2494
160.3
Second Layer Coursed sand screened, cleaned and washed and graded from 3 mm to 6 mm (from Ghaggar or approved equivalent quarry)
2.83
3262
288.2
Third layer Bajri screended washed and graded from 6 mm to 20 mm (from Ghaggar or approved equivalent quarry)
2.83
1649
145.75
Bottom Layer Broken stone, screened, washed and graded from 50 mm to 75 mm (from Ghaggar or approved equivalent quarry)
2.83
1433
126.6
Drilling 300mm dia with machenical with reverse rotary machine complete in all respect.(NS)
60.96
27432
450
PVC Sloted pipe (NS)
30.48
12192
400
End Cap (NS)
2
200
100
Total Rain water
-
-
-
Planting work
-
-
-
Supply laying ,planting ,watering and levelling of earth of selection no. 1 grass including good fertilizer earth , manure etc. complete. (NS item)
1086.43
46716
43
Cost of plants to include cost of planting i.e. prepration of holes and flower beds with 25% farm yard manure and anti-termite treatment at 5ml choropheryphos and replacement of mortalities during maintenance period:- a) Trees:- to be planted in holes 0.75m dia and 0.75m depth to be positioned 1.00m inside the boundary and spaced 5.00m apart:- (Height of plants in Mtrs.) i) Bottle Palm (2.00)
4
1680
420
ii) Bauhinia Blackeana (0.75)
10
1750
175
iii) Ficus Benjamin (1.50)
6
1500
250
iv) Washingtonia Palm (1.50)
4
1900
475
v) Phoenix Palm (1.25)
4
3400
850
b) Shurbs:-
To be planted in flower beds (FB) size 15.00 mtr x 1.00 mtr and plant spaced 0.50 mtr in two rows Variety i) Chandni Var (0.30
50
2500
50
ii) Gardenia (0.45)
50
2500
50
iii) Motia "Mogra (0.30)
100
3000
30
iv) Roses (0.30)
100
3000
30
v) Ficus panda (0.30)
100
3000
30
TOTAL Planting Work
-
-
-
Note: HPHC has the option to supply the materials from the store/stock. In that case only errection/labour charges will be paid as per HSR+CP to the agency.
-
-
-
E.I HSR
-
-
-
c) Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. C) HSR 31.12 CP 60% ii)100 amp.to 220 amp.415 V,10 KA 3-phase.
2
13587
4246
S/E of miniature circuit breaker/isolator 240/415 Voltage in existing distribution board i/c making necessary connection. HSR 31.17 CP 30% ii) SPMCB 6 Amp to 32 Amp
100
12350
95
ii) TP MCB 40 to 63 Amp
2
980
377
iii) SPN MCB 40 amp to 63 Amp
1
312
240
iii) TPN MCB 40 amp to 63 Amp
2
1297
499
S/E OF FITTING AND ACCESSORIES.(HSR 31.18) CP 200% xi) Bakilite angle/straight button holder large size.
51
948
6.2
xxvi ) S/E of hexagonal MS Box 1.6mm thick, 8cm, 7.5cm deep top covered with MS lid by means of screws i/c 10mm dia 30cm long MS rod into suitable suspension hook &bottom covered with 3mm thick bakelite sheet, erected in RCC Slab complete.
45
3550
26.3
Erection of ceiling fan complete with necessary earthing of fan and regulator including carriage fromlocal railway station / goods transport/ PWD store to the site of work HSR 31.20 CP 130%
45
1345
13
Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. (HSR 31.21) (CP 350%) iii)Galvanised iron pipe 25 mm dia on surface.
15
2646
39.2
xxx) Supply and erection of PVC pipe of 6 kg. Pressure, laid 1 metre below ground level complete, including digging refilling of the trench with jointing etc:- b) PVC pipe 80 mm dia.
155
29295
42
Earthing (HSR 31.22) (CP 350%) iii) Earthing with G.I. earth plate 600 mm x 600 mm x 600 mm x 6 mm thick including accessories and providing enclosures accessories and providing enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
4
8154
453
iv )Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.
1
5170
1149
v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.
5
4185
186
xiv) Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.
15
7897
117
xv )Pdg. and fixing 25 mm x 5 mm G.I strip on surface or in recess for connection etc. as required with all labour and material
120
10962
20.3
Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . (HSR 31.26) (CP 140%) iii) 6 sq.mm 2 core cable
100
5400
22.5
xxv) 25 sq mm 3.5 Core cable
30
3592
49.9
xxvii) 50 sqmm 3.5 core cable
150
26892
74.7
Supply & Erection PVC unsheathed Copper conductor cable single core 1100 Volts grade in pipe of suitable size( excluding cost and erection of pipe) HSR 31.40 CP 10% i) Size 1.50 Sqmm
10000
112200
10.2
iii) Size 4.00 Sqmm
3030
81658
24.5
v) Size 10.00 Sqmm
108
5940
50
SHEET STEEL ENCLOSURE: Supply & erection of sheet steel enclosure Double door distribution boards suitable for MCBs etc. on wall/ existing board/ pedestal/flushed in wall with rag bolts i/c bonding to earth. HSR 31.41 CP 10 % ii) 8- way, SPN (H)
1
957
870
x) 8- way, TPN (v)
2
10758
4890
P/F modular type accessories of approved make in existing box i/c fixing and making necessary connection, complete in all respect. HSR 31.56 CP 0% 10 amp. 1 way switch
24
2088
87
10 amp socket
24
2544
106
Fan Regulator
45
17865
397
Blinking plate
200
5000
25
Call Bell
1
99
99
P/F GI concealed sheet metal boxes with inner and outer faceplate i/c concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect.HSR31.57 CP0% 1&2 Modules
24
2424
101
Supply and erection of moulded case circuit breakers Four pole on wall or on existing pedestal including bonding to earth and necessary connections.(HSR 31.69) (CP 0%) vi) Four Pole MCCB 200 Amp
1
10500
10500
HSR 31.78 ( CP 0%) Supply and laying of multi coretelephone cable conductor size0.51 mm bright annealed copper conductor pvc injuctedandsealed inexisting pipe/channel andmaking necessary connections complete in all respect upto entire satisfaction of EIC of the work.i) 2 pair Telephone wire
500
3970
7.94
TOTAL HSR E.I
-
-
-
E.I NS PART
-
-
-
Wiring in 1.5 sqmm PVC insulated copper conductor cable in 25 mm PVC conduit pipe "Heavy gauge ISI marked,modular metal box of suitable size with modular inner & outer cover plate,Cu wire,switch & socket (ordinary), C.I. junction boxes, bakelite sheet 3mm thick, screws with washers , complete in all respect(Surface Type) 1) Fan point:- b) Medium point
33
16500
500
c) Long point
12
8376
698
2) Light point:- a) Short point
44
13420
305
b) Medium point
47
22231
473
c) Long point
92
61732
671
iii) Twin control ligh point with 2 ways 5 amp. Single pole switch c) Long point
8
6256
782
vi) Call bell point i/c MS box of size 180mmx100mmx60mm deep for call bell. c) Long point
1
686
686
vii) 5 pin, 5 amp. Plug pint i/c earthing the 3rd pin with 1.5 sqmm copper earth wire a) Short point
59
27317
463
b) medium point
10
6650
665
c) Long point
28
25256
902
6) 5 pin, 15 amp.plug point with 4 sqmm PVC insulated copper conductor cable i/c earthing the 3rd pin with 1.5 sqmm copper earth wire c) Long point
38
53960
1420
S/E of 4 pair UTP ( unshethed twisted pair) Cat - 6 cable of approved make in existing pipe complete in all respect i/c all labour and material 7 making necessary connections.
200
5000
25
S/E of modular type switch socket accessories on modular box i) Modular Telephone socket jack with shutter RJ-11
10
1150
115
ii)25 A/10A 6 pinmodular type socket ( For AC Point)
2
410
205
iii) Motar Starter 25 amp 2 module (For AC Point)
2
826
413
iv)RJ-45 computer Jack for CAT-6 Cable
10
4190
419
v) Modular TV socket
2
230
115
S/e of round co axial cable for TV of size RG 6 with electrolytic grade solid bare copper conductor polyethlene foam insulation with laminated aluminium tape and wire brand jeely flooded and UV grade pvc black jacket in existing pipe complete in all respect i/c making necessary connections etc.
100
1900
19
S/E of surface mounting LED Batten fitting 1x18 watt (4 feet long ) made of high grade poly carbonate body provided for efficient heat dissipation & integrated electronic driver suitable for single phase AC 230 volts , 50 HZ supply complete in all respect. Bajaj model BCLSB 18w or Equivalent of other makes)
39
22074
566
Supply and erection of surfzce mounting LED Batten fitting 1x9/10 Watt,(2 feet long) made of high grade poly carbonate body provided for efficient dissipation & integrated electronic driver suitable for single phase A.C. 230 Voltes,50HZ supply, complet in all respect. Bajaj,Crompton Greaves/Havell's/Wipro/HPL) (Bajaj Model- BCLSB 10 W or Equivalent of other makes)\
7
3094
442
Supply and erection energy efficient LED 6000 K square luminaire,complete with diffuser ,energy efficient electronic driver and other material required complete the job including fixing the same in false ceiling with required material & making necessary connection etc:- 33/34/36 W recess mounting 2'x2' (BAJAJ Model-BZSRQL36W WH or wquivalent of Crompton Greaves/Havell;s/Philips/WIPRO/HPL brands)
27
84024
3112
Supply and erection energy efficient LED 6000 K 1'x1' luminaire,complete with diffuser ,energy efficient electronic driver and other material required complete the job including fixing the same in false ceiling with required material & making necessary connection etc:- (LED 15/18 W square fitting surface mounting ( BAJAJ Model-BZSSQL18W WH or wquivalent of Crompton Greaves/Havell;s/Philips/WIPRO/HPL brands)
35
65240
1864
Supply and erection of wall fan 16" sweep (400mm) oscillating type light duty complete with built-in regulator, blade, Jail complete. (Make-Haveli's Model-Platina / Crompton make & Model- HUGh Flow LG White only).
3
6600
2200
Supply and Erection of Street Light LED luminaire 45 Watt suitable for operation on 230 Volts A.c supply.( Havell's)
10
45780
4578
S/E of PVC pipe "Heavy" ISI marked for heavy gauge i/c bend inspection box etc. i/c laying of pipe in slab or wall complete with all petty material required to complete the job in all respect. i) 25 mm dia on reccessed
4012
180540
45
(ii) Size 25 mm dia on surface
202
8080
40
iii) 40 mm dia on surface
33
2046
62
S/E of double door sheet steel enclosure distribution suitable for MCCB as incomer. recessed in wall i/c board with all labour and material required to complete the job in all respect upto to the entire satisfaction of the EIC of the work i) 8 way TPN (vertical ,MCCB provision for 100 amp -125 amp MCCB 4 P and provision for24 Nos.6 A-30 amp MCB SP as outgoings)
1
8940
8940
ii) 12way TPN (vertical ,MCCB provision for 100 amp -125 amp MCCB 4 P and provision for 36 Nos.6 A-30 amp MCB SP as outgoings)
1
11659
11659
Supply and erection of Post-Top Lantern luminaire, decorative with UV stabilized polycarbonate diffuser suitable for 40/45 retrofit LED complete with 40/45 watt LED threaded type, fixed on existing pole. The work will be complete in all respect including making necessary connections, nuts & bolts and labour etc. (approved brands of brand list.
3
9486
3162
S/E of water cooler of fully stainless steel body with 150 ltr storage & cooling capacity (make -USHA / SIDWAL ) &Water purifier of 25 ltr.(make-Kent) with all labour and petty material required to complete the job. Include 4 KVA copper wound stablizer.
1
90000
90000
S/E of 1400 VA Invertor ( Luminious / Microtek / Sukem make ) suitable for operation on single phase 230 volts, 50 HZ, AC supply with 2 nos 150 AH Exide batteries having warranty of 2 years i/c cost of trolly for batteries complete with all labour and petty material required to complete the job.
1
30475
30475
Supply Testing & commissioning of wall fan 16"sweep (400mm) oscillating type complete with built in regulator (Platina- Havell's , / comprton greaves Make &model high Flo -LG white ). The fan is to fixed on wall with suitable fixing arrangement including connection from nearest light point with cost of Cu wire required.
3
6240
2080
S/Eof fresh air fans (Exhaust fan) 250mm sweep PVC body with louver shutter, suitable for single phase A.C. 230 Volts, 50 HZ supply complete with all labour and petty material required to complete the job. ( Havell's - Make & Model - Ventlair DX or crompton Greaves model Brisk air)
10
14900
1490
S/E of sheet steel enclosure suitable for 3/4 pole MCCB on wall/pedestal with nuts & bolts including bonding to earth, complete in all respect. (ii) For 100 amp to 315 amp MCCB
1
1276
1276
S/E of ISI marked propeller type ventilating fans (Exhaust fan/ Fresh air fan) suitable for single phase 230 Volt, 50 Hz AC, capacitor run complete with mounting rings with four no. fixing holes without regulator as per Rate contract specification with all labour and petty material required Havells- make & model - Turboforce / Crompton greaves - Make & model Heavy duty ) Size 300mm sweep
1
2995
2995
S/E of aluminium anodozied louver shutter for exhaust fan (thickness of Frame 1.00mm & blade thickness 0.80 mm ) including all labour and other petty material required to complete the job. (canon , National make ) Size 300 mm sweep
1
592
592
Providing and fixing of fire extinguishers of CO2 type of 4.5 Kg Capacity complete with Horn and valve with intial charge as required i) 4.5 kg
2
13360
6680
ii) ABC type 4.0 Kg capacity
2
4560
2280
iii) ABC type 2.0 Kg capacity
2
2710
1355
S/E of LED 40"TV with WI-FI system Model No. RM 40 D as per specification:- i) Full HD commercial/ Professional LED TV tunner card (With WI-FI) Resolution:- 1920x1080 viewing angle :- 178 degreex 178 degree of more , Audio capacity of speakers:- minimum 8 watt x 2. Power supply 220 volts- 240 volts, 50-80 Hz with base standand energy saving BIS cirtification . Warrenty 3 years from date of Installations and complete with all accessories i.e. required cables. remote control, Power cable, HDMI cable, Manual etc. up to entire satisfaction of EIC of the work (Make:- SONY, SAMSUNG)
1
42000
42000
SITC og EPABX system, completein all respect consisting of following items;- i) EPABX machine equiped with 4 trunk , & extensions and expendable type (Make:- NEC, Model-SL 1000)
1
23177
23177
ii) Telephone set Model P-tel PT 33
7
4690
670
iii) Telephone set Model P-tel PT55
1
1228
1228
iv) Stablizer CVR 500 VA
1
2056
2056
S/E of tag block for terminating telephone cables. The tag blockis to be fixed on exisitng wall with screws etc. B) Size 20 Pairs.
1
1500
1500
S/I/T/C of 1.5 TR high wall 'split type air conditioning unit " Hitachi make ,3 Star rating at 220 volts+_ 10%single phase ,50 cycle per second electric supply and consisting of condensing and indoor unit,LCD cordless remote,Ms stand for outdoor unit,copper refrigrant piping per circuit of suitable size upto 3Mtr length,stablizer 5 KVA wall mount of 100 up volts(copper wound )and first charge of refrigrant gas .The work should be completed inall respecti/c making repair of wall ,floor and roof in original shape caused by making holes and chases etc.
1
50500
50500
Supply installation testing & comissioning of DVR 16 Channel HD HDCVI cp plus, 1.2 mp with allied items for connections (make CP plus,Hik vision,Bosch)
1
12102
12102
Supply installation testing & comissioning of Power Supply 12v 20A, DC with allied items for connections (make CP plus,Hik vision,Bosch)
5
13000
2600
Supply installation testing & comissioning of CCTV Camera Bullet 1.3 MP 3.6mm 24 IR with allied items for connections (make CP plus,Hik vision,Bosch)
10
21140
2114
Supply installation testing & comissioning of Disk 4 TB for exsisting DVR allied items for connections ( Make seagate,Toshiba,transcend)
1
11067
11067
S/E of A.C.ceiling fan, capacitor type,Copper wound, with double ball bearing complete with capacitor, 300 mm down rod, canoppies, shackles, three no. blades made of aluminum alloy suitable for single phase AC 230 V 50 Hz supply without regulator ( Make:- Havells 5 star) Model ES-50 or Crompton Greaves make mode High Breeze plus i) Size 1200 mm sweep
45
90315
2007
Total N S
-
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements