Pandit Lakhmi Chand State University Of Performing And Visual Arts Tender

Lighting side Ladders M.S. Pipe Ladders to be provided on sides of the Stage to be fixed on the existing GI pipe or top grid. Made of 50mm x 25mm MS pipe.

Variable Spot light with wave lens 25-50 degree SITC of Variable spot with Lamp and accessoriesA) GENERALThe fixture shall be efficient HPL lamp based of IP20 rated for indoor use. Ambient operating temperature of +40 Degree. Normal operation and control functions shall not require tools.B) PHYSICALThe fixture shall have die cast aluminum housing Finished with epoxy paint with color options.Fixture shall not weight more than 10Kg. Fixture shall have steel yoke with positive locking system. Thermally insulated focus knob. The fixture shall have slot for Barn door and Gel frame.Gel frame retainer. The fixture shall be supplied with ‘C’ clamp suitable for use on upto 2inch OD pipe.18inch safety chain/cable. Gel frame. Barn door.C) ELECTRICALThe fixture shall be equipped with 240V A/C, 50Hz power supply. Lamp shall be HPL 575/750 W Tungsten filament with integral die cast aluminum heat sink base . The fixture shall be supplied with 1meter High temperature (105 Degree Celsius) 3 core cable in glass fiber outer sleeve.D) OPTICALIntegral 25 – 50 Degree spot to flood adjustment. Dichroic reflector.The luminaire shall produce 10 -12 lumens per watt.

Enhanced Alumised Par SITC of Par Rugged die-cast aluminium constrcution with insulated precison focus knoband sealed reflector housing.Gel frame holderswith accessory slots , steel yoke.Four heat resistant, molded borosilicate glass lenses supplied with each unit: Very Narrow Spot (VNSP), Narrow Spot (NSP), Medium Flood (MFL) and Wide Flood (WFL). Thermally insulated lens ring. Electrical 115-240V,50/60Htz with high temprature three conductor 36inch leadin a glass fiber outer sleeve .Optical- Integral 24-47deg spot to flood adjustment modified multifacted adjustment Lamp Compact tungsten lament contained in a krypton/xenon- lled quartz envelope with iIntegral die-cast aluminum heat sink lamp base with wattage of 750w with lamp, clamp and saftey cable

Zoom Ellipsodal 25-50 degree Supply, installation, commissioning & testing of Zoom Profile with Lamp and accessories:A) GENERAL The fixture shall be efficient HPL lamp based of IP20 rated for indoor use. Ambient operating temperature of +40 Degree. Normal operation and control functions shall not require tools. B) PHYSICALThe fixture shall have die cast aluminum housing. Finished with epoxy paint with color options.Fixture shall not weight more than 10Kg. Fixture shall have steel yoke with two mounting positions. The yoke shall have positive locking on both side of housing.The fixture shall have 4Nos tool free stainless-steel shutters, have thermally insulated knows and shutter handles. The fixture shall feature two accessory slots Gel frame retainer. The fixture shall have slot for iris. The fixture shall be supplied with‘C’ clamp suitable for use on up to 2inch OD pipe. 18inch safety chain/cable. Gel frame.C) ELECTRICALThe fixture shall be equipped with 240V A/C, 50Hz power supply. Lamp shall be HPL 575/750 W Tungsten filament with integral die cast aluminum heat sink base. The fixture shall be supplied with 1meter High temperature (105 Degree Celsius) 3 core cable in glass fiber outer sleeve.D) OPTICALThe fixture should have two lenses. Dichroic reflector.Reflector should be secured with anti-vibration shock mount. Tool free positive locking X Y and Z lamp centering adjustment. Beam edge shall be continually adjustable from hard to soft.The light output of the luminaire shall have variable field angle from 25 to 50 degrees and shall produce 10 -12 lumens per watt.

LED Ellipsodal 36 degree with Loop droop SITC of Color mixing or White-light Light Emitting Diode - LED PROFILE WITH 36degree  :A All LED fixtures shall be provided by a single manufacturer to ensure compatibility.The unit shall be constructed of rugged, die cast aluminum, free of burrs and pits, as well as injection molded ABS components; finished in black.Fixture shall be equipped with a cooling fan.Fan speed control via a DMX channel shall be possible.The fixture shall utilize advanced thermal management systems to maintain LED life to an average of 70% intensity after 20,000 hours.Temperature sensors placed on each individual LED color circuit.All LEDs used in the fixture shall be high brightness and proven quality from established and reputable LED manufacturers.Fixture shall utilize Luxeon® Rebel™ and/or Osram OSLON Square LED emitters.All LED fixtures (100% of each lot) shall undergo a minimum three-hour burn-in test during manufacturing.Fixtures shall have adjustable PWM frequency up to 25,000hz to avoid flicker on camera.The fixture shall be provided with an LM-84 test report from a nationally recognized test lab.All fixtures shall be provided with the minimum warranty of 5 years.All Led arrays, including replacement arrays shall be calibrated to the same standard to insure consistency.The fixture shall utilize a minimum of 60 LED emitters.The Fixture shall have Red, Green, Blue and Lime Led array .The LED system shall be digitally driven using high-speed pulse width modulation (PWM).PWM control of LED levels shall be imperceptible to video cameras and related equipment.PWM rates shall be adjustable by the user via RDM to avoid any visible interference to video cameras and related equipment. The fixture shall have three mode output settings for Loop Droop.

RGBL LED Par with Loop droop SITC of LED Par Fixture shall utilize 40 or more Luxeon® Z™ LED emitters. The fixture shall be having 40 emitters and shall be made up of RED, Green , Blue and Lime/White. The fixture shall be USITT DMX512-A compatible via In and Thru 5-pin XLR connectors. Sturdy gel frame holders with two accessory slots and a top mounted, quick release gel frame retainer.Noiseless, fan-free convection cooling. constructed of rugged, die cast aluminum, free of burrs and pits, finished in black, high temperature epoxy paint. LED emitters shall be rated for nominal 50,000 hour LED life to 70% intensity .Manufacturer of LED emitters shall utilise an advanced production LED binning process to maintain colour consistency With safety cable. And C-Clamp

RGBL LED Cyc with Loop Droop SITC of Led Cyclorama Color mixing Light Emitting Diode Cyclorama fixture Light output shall be produce an asymmetrical beam Lensing shall be designed to provide smooth coverage both horizontally and vertically for seamless blending from fixture to fixture With a minimum setback from the cyclorama of 2’, The fixture shall be rated for IP-20 dry location use. fanThe fixture shall utilize advanced thermal management systems to maintain LED life to an average of 70% intensity after 50,000 hours of use Thermal management shall include multiple temperature sensors within the housing to include The LED array, The control board, The fixture shall operate in an ambient temperature range of 0°C (32°F) minimum, to 40° C (104°F) maximum ambient temperature. ELECTRICAL The fixture shall be equipped with 100V to 240V 50/60 Hz internal power supply, The fixture shall support power in and thru operation, Power in shall be via Neutrik® PowerCON™ input connector, Power thru shall be via Neutrik ® PowerCON ™ output connector Fixture shall utilize Luxeon® C™ LED emitters, Manufacturer of LED emitters shall utilize an advanced production LED binning process to maintain color consistency, LED emitters should be rated for nominal 50,000 hour LED life to 70% intensity, LED system shall comply with all relevant patentsFixtures shall have a flicker free mode that will set the LED refresh rate to 25,000 Hz for flicker free operation on camera .The fixture shall be provided with the minimum warranty 5 years full fixture coverage10 years LED coverage COLOR The fixture shall utilize a minimum of 42 LED emitters These emitters shall be made up of Red, Green, Blue, Indigo and Lime.The LED system shall be digitally driven using high-speed pulse width modulation (PWM) LED control shall be compatible with broadcast equipment in the following ways:PWM control of LED levels shall be imperceptible to video cameras and related equipment

Light point SITC of Light Point Wiring from Distribution Board to be provided near stage to various stage light fixtures with 2.5 Sq.mm 3 Core PVC Insulated and PVC Sheathed Cable (ISI Mark) including Cable Tray of suitable size for laying these wires on the tray including 20 amps metallic clad sockets/ 15 Amp Socket to direct points with box at top etc complete as required.

Dmx Point DMX Point wiring Twisted pair shielded cable for DMX control of 100-110 ohms impedance.

2:8 output Dmx Spillter/Booster ( RDM enabled ) SITC of RDM capable, rack mountable DMX splitter with two inputs and eight assignable outputs specifications:Power Supply: 90-240V AC, 45-63Hz.Control: DMX 512 protocol,Control Signal input: 5 pin XLR female,Size: 482 x 44 x 128mm ,Weight: 2Kg.with splitter bracket.

Wall Mount Dimmer 24x 2.3 kw with Single pole Supply, installation, commissioning & testing of Dimmer Rack - 24 x 2.3 kW :Complies with DMX512/RDM standard Mode select - Constant circuit and dimmed Dimmers 24X 10A (2.3 kw each) Single pole - 230V A/C +/- 10%, 47-63 Hz 80A 3Phase + Neutral+ Ground Input lugs rating minium 8sqmm. Output through fully rated MCBOutput terminale rated for up to 2.5sqmm 2500V Isolation between control and power component Removable terminals for control (DMX512) cable.contact rated for maximum 2.5sqmm Covvection cooled, wall mount cabinet with full front access Steel cabinet construction with scratch resistant epoxy paint. Wall mounted cabinet with Full front access Ambient operating temperature between 0-35 degree C Humidity between 40-95% High contrast backlit LED display Power status indicatorDMX status indicator.

LIGHTING CONTROLLER WITH RDM Enabled Supply, installation, commissioning & testing of Lighting Console The lighting control console shall be a microprocessor based system The system shall provide control of 512 DMX512A addresses on minimum 80 Channels The system shall have minium 40 Channel / Playback Faders 1 DMX/RDM Port 1 USB port Minimum 2GB on-bord storage Color Multi-touch touchscreen One que list with 999 cues 10 Pages of 20 or 40 playbacks sequences Multiple bump modes(Flash, Solo. Solo change Move/Go)On board help system Dust cover.