Panchayati Raj Department Tender

SUBHEAD-I `PUMPSETS` Supplying, installation. testing and commissioning of electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body and bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520 b) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with 1P55 class of protection for enclostyre. horiziontal foot mounted type with Class•7` insulation, conforming to IS-325. (c) M,S.fabricated commoii base plate, coupling, coupling guard, foundation bolts etc.as required (d) Suitable cement concrete foundation duly plastered and with vibration pads. System shall includes pipes, valves, strainers, Electrical control panel and cable for pump Supplying, installing, testing and commissioning of elecInc driven automatic fire booster pump set consisting of the following : 1 450 1pm at 35 m Head

Providing and fixing of pressure switch in M.S. pipe line including connection etc. as required.

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 80 mm dia

Providing, laying, testing and commissioning of `C` class heavy duty MS pipe conforming to IS 3589/1S 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required: 100 mm dia

Supplying and fixing single headed internal hydrant valve with instantaneous Gunmetal/ Stainless Steel coupling of 63 mm dia with cast iron wheel IS1 marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required: Single headed Stainless steel

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve and nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve and M.S. Pipe and socket. 40M

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required Stainless Steel (Grade`304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required 2 way-100 mm dia M S Pipe

Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange and landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.

Providing and fixing dial type pressure gauge with isolation cock and pipe at hydrant station and sprinkler line. Dia 100mm calibration0-15kg

Providing and fixing fully glazed MS fully welded construction double leaf door shutter for fire hydrant station fabricated from MS 50x50x6 mm angle iron frame, fixed to wall and hinged MS 40x40x5 mm angle iron door shutter with required MS sash bars for glazing complete with locking arrangements, enamelled fire red finish with `FHC` written in front.The width and height to depend upon the actual size of the fire shaft available and get it approced by Engineer-in Charge/ consultant before fabrication Approximate size 1800x 1200 mm.

S/F fireman axe as reqd

Providing and fixing portable fire extinguisher, dry powder type (gas , cartridge) with cylinder initially fully charged with dry powder (ABC typei of 4 Kg. Complete with standard discharge valve with tube, CI bracket for %call mounting etc. conforming to IS: 115683.

Providing and fixing portable fire extinguisher carbon dioxide type «ith cylinder initially fully charged with CO2 gas of 4.5 Kg. Capacity, complete with discharge valve, dishcarge tube, horn, CI bracket for wall mounting etc. conforming to IS: 15683.

Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 100 mm dia

Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, Cil bolts, nuts, washers etc.as required : 80 mm dia

Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.

Providing, fixing, testing and commissioning of resettable type manual call point, made of ABS housing, having onboard activation and resetable feather touch switched and should have an indicator, which should `blink` green in case of normal condition and become steady Red in case of Operation. MCP should have a transparent ABS cover for physical protection (MAKE : Agni Suraksha (ASF SI ` System Sensor i Apollo / Siemens)

Providing, fixing, testing and commissioning of electronic hooters with strobe, with Polymer housing suitable for wall / ceiling and surface mounting including making connections with wires complete in all respects and as per specifications, (Make : Agni Suraksha (ASES). Safeway. System Sensor)

Providing and fixing of self illuminated / auto glow `EXIT` signs printed on photoluminescent sheet containing self illuminated base chemical, of appropriate size not less than 400 x 150 mm, suspended from ceiling or fixed to the walls with accessories as required and as directed at site. (Make : Agni Suraksha (ASES), Safeway, Honeywell, AUTOGLO))

Supply of under ground cable in existing pipe or trenches complete with necessary connection:- 25 sqmm 4 core armoured cable

S/E of 18/20 watt Led batten tube Fitting Make Philips, Bajaj, Crompton, Halonix, Surya ,Syska.

S/E of 600 x600 mm LED pannel light 36watt(Philips/ Bajaj/ Crompton/ Wipro/ GE/ Syska / Halonix) including making necessery connections

S/E of 45 watt LED street light fitting having 110 Lu/watt or more, potted driver, toughened glass and aluminium dia cast body (Philips/ Bajaj/ Crompton/ Wipro/ Havells/ Surya) make including making necessary connections.