Panchayati Raj Department Tender

SITC of 18W LED Surface/recessed type/ mounted round/square type downlighter. The Fixture should be Made of Extruded Aluminium Housing. Inbuilt Protection of 2kv, PF).95, System Wattage 18W integral housing for driver. Minium 100 lumens/W in 5700k.

SITC of LED Surface/recessed type Mounted Square/Rect. Bulkhead Light. The Fixture should be Made of PDC Housing.PF).95, System Wattage 10w with Minium 100 lumens/W in 5700k. The Fixture should be IP-65of Makes :-PHILIPS-/HAVELLS/WIPRO

SITC Surface/recessed type Mounted Bracket/wall light . The Fixture should be Made of chromeandmetal Housing.PF).95, System Wattage Tronto E27,24Ww with Minium 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS-/HAVELLS/WIPRO

SITC 45W LED Street Light. The Fixture should be Made of pressure diecast housing with TOUGHNED GLASS diffuser and indivisual LEDs with secondary optics with IP 66 protection. PF).95, System Wattage LED 45W with Minium 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS-/HAVELLS/WIPRO

SITC 1x18W or 18/20W LED 1200mm Batten Light. The Endura Fixture is a Surface/recessed type and wall mounted LED batten with extruded aluminium housing and robust construction . PF).95, System Wattage LED 20W with Minium 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS-/HAVELLS/WIPRO

SITC 6W LED aesthetically brillient Surface/recessed type picture/mirror light. The Fixture comprises of aluminium with silver/gold finish . PF).95, System Wattage LED 6W with Minium 1500 lumens in 5700k of size 70x87x350mm. The Fixture should be of Makes :-PHILIPS-/HAVELLS/WIPRO

Supply of Surface/recessed type/recessed type 32W Full window glarefree opal Diffuser LED Panel of size 600X600mm suitable for Surface/recessed type with MS Powder coated White Housing. Total system Lumen of 36W LED should be 4100 or above in Cool day Light(5600K to 6500K), Power factor)0.90, CRI (Ra) )80, THD (20% LED Lamp. Efficacy)140 Lm/W. Complete with all accessories as required with connections PHILIPS-/HAVELLS/WIPRO

SITC 2x18W or 36/40W LED 1200mm Batten Light. The Endura Fixture is a Surface/recessed type and wall mounted LED batten with extruded aluminium housing and robust construction . PF).95, System Wattage LED 40W with Minium 1500 lumens in 5700k. The Fixture should be of Makes :-PHILIPS-/HAVELLS/WIPRO

Supply, erection, testing and commissionoing of 10 KVA UPS system complete with battery bank (30/60 minutes backup) SMF battery 12 V 65 AH/12V100AH = 16 Nos. complete with all accessories including battery breaker, racks, links, cabling including all petty material required to complete the job upto entire satisfaction of the Engineer-in-charge. Make: FUJI,NUMARIC,SOCOMEC./3EM/BPE

Supply, erection, testing and commissionoing of 20 KVA UPS system complete with battery bank (30/60 minutes backup) SMF battery 12 V 65 AH/12V100AH = 16 Nos. complete with all accessories including battery breaker, racks, links, cabling including all petty material required to complete the job upto entire satisfaction of the Engineer-in-charge. Make: FUJI,NUMARIC,SOCOMEC/3EM/BPE

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing Surface/recessed type/ recessed steel/ PVC conduit as required.(DSR 1.19 Based)

24 Port POE Rack Mountable, Gigabit Switch with 4 SFP Port etc. as reqd. D-Link DGS-1210-28 P 10/100/1000Mbps Unmanaged Ethernet Switch with 1 year Warrenty (For Data points distribution)

SITC of Metal/GI Raceways having 2.44 mtr standered length size 225x38x 3 compartments 1.6mm thick. Legrand code 6895-04

SITC of Metal/GI Raceways having 2.44 mtr standered length size 100x38x 1 compartments 1.6mm thick. Legrand code 6895-02

SITC of Metal/GI Raceways having 2.44 mtr standered length size 50x38x 1 compartments 1.6mm thick . Legrand code 6895-00

SITC of Fixing brackets for 225x38mm 3 compartment 1.6mm thick raceways Legrand Code 6897-25

SITC of Fixing brackets for 100x38mm 1 compartment 1.6mm thick raceways Legrand Code 6897-37

SITC of Fixing bracket for 50x38mm 1 compartment 1.6mm thick raceways Legrand Code 6897-27

SITC of Vertical Riser for 225mm width raceways Legrand Code-6897-23

SITC of coupler for joining raceways Legrand Code- 6897-77

SITC of Height Adjustable Junction Box with lid size 225x225x60-90mm Legrand Code 6896-11

Wiring for 250 volts single phase and neutral 25 amps 3 pin industrial socket outlet with 25 amps DP interlocked rotary switch in polycarbonate enclosure of approved size and design with 6 sq. mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 25 mm dia 16 gauge thick FRLS PVC conduit, including providing and fixing of 3 pin industrial socket and earthing of third pin of the socket outlet with 3 run 6 sq. mm PVC insulated copper conductor stranded flexible FRLS wire. CAR CHARGING PURPOSE

Wiring for 250 volts Three phase and neutral 30 amps 5 pin industrial socket outlet with 32 amps 4P interlocked rotary switch in polycarbonate enclosure of approved size and design with 6 sq. mm PVC insulated copper conductor 1100 volts grade stranded flexible FRLS wires in concealed or surface mounted 32 mm dia 16 gauge thick FRLS PVC conduit, including providing and fixing of 4 pin industrial socket and earthing of third pin of the socket outlet with 6 run 6 sq. mm PVC insulated copper conductor stranded flexible FRLS wire.CAR CHARGING PURPOSE

SITC of 6W Recessed Ceiling speakers with following features:-Speaker Drive 6`, Complete Aluminium grille and Metal baffle, line matching transformer 100/70V line. Variable wattage tappings of 6 / 3 / 1.5, Effective frequency range 110-15kHz (BS6840), SPL@1m/1W=91dB, Peak SPL 97dB complete with necessary mounting hardware and accesories. Make: Honeywell/BOSCH/JBL

SITC of 10W Wall Mount Speaker with Frequency Response 150Hz - 15kHz, with Line Matching transformer 100V. Variable tapping 10W/5W, SPL@1M/1W - 90dB, Peak SPL 98dB. the cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

Supply, Installation,Testing and Commissioning of Digital Voice Evacuation system for 8 Zones. The System shall meet the standards of BS EN54 - 32 and EN 60849. it should be capable for the EVAC, Paging, PA and BGM functions. The Controller shall have SD card option to store the EVAC and Alert Voice Message. The Controller shall have Speaker line supervision and amplifier auto changeover. The Controller shall have following features: Seperate Zone volume control at the front side of panel, Status indications on the Panel for EVAC,Fault ,AC,DC ,Fault,ALERT and Fireman mic, Zone capacity up to 96 Zones, 8 programmable Control Input and output, Fireman Microphone with High Priority, THD(1%, Frequency response 80Hz - 20kHz, Up to 1000 Record files, 1

SITC of Remote Paging microphone with minimum 08 buttons and Busy/Hole Indication. The Microphone Should be suitable for Desktop mounting. Make: Honeywell/BOSCH/JBL

Supply Installation testing and comisioning of 500W RMS Dual Channel Power Amplifier with Switch power technology for power electricity saving, Separate PFC Design for highest reliability, Separate Power Supply System. Amplifier shall have Following Features: 240W RMS per Channel, Amplifier Output 100V, Supply input AC 220 plus /- 10% - 50/60Hz, Short Circuit, Power, Tempreature, Overload Protection, Auto Cooling Fans. THD (0.1%, Frequency Response 40Hz - 20kHz, AC and DC Fuse, SNR )89dB. Make: Honeywell/BOSCH/JBL

Supply Installation testing and comisioning of Professional CD/DVD player with USB flash port and 19` Rack mount arrangement.

Supply Installation testing and comisioning of 19-inch Equipment Rack with standardized frame or enclosure for mounting multiple PA controllers, CD player, Amplifiers etc modules. Size 24U.

Supply and Laying of 1.5 sq.mm. multistrand PVC sheathed Two Core Twin Twisted Speaker Cable in Exiting PVC Conduit.

SITC of 10 Loop with Expendable Loops Micro processor based 1 wire fault tolerant loop, required loop networkable type (each loop accessing 199 detectors and 199 modules ) fire alarm/detection control panel having 640 Character Display The panel shall be able to give location of all fire/fault conditions of addressable units via the address codes. Further, the panel must be able to automatically switch ON /OFF respective control module when ever any alarm is triggered. The panel shall have rectifier, Loop cards, 80 character LCD unit to indicate Fire/Fault Signal with addresses. The Panel Shall be Sheet Steel Painted, sealed to IP30. The panel should have provision to integrate with PA System . The panel shall have a built in power supply and battery charger along with maintenance free 24 AH, 2 x 12 volt SMF Lead acid batteries capable of running for a minimum of 24 hours with battery charger complete as required. and conforming to BS5839 Standards and Duly Approved by EN54/UL. (EDWORD/Siemans/JOHNSON CONTROL)

SITC of Active Repeator panel (EDWORD/Siemans/JOHNSON CONTROL)

SITC of Analogue Addressable type Smoke Detector with Visible bi-color LEDs for 360 deg having Rotary, decimal addressing system in the range of 01-159, complete with standard base, as required, complying to EN54 and/UL approved (EDWORD/Siemans/JOHNSON CONTROL)

SITC of Analogue Addressable type Heat Detector with Visible bi-color LEDs for 360 deg having Rotary, decimal addressing system in the range of 01-159, complete with standard base, as required, complying to EN54 and/UL approved (EDWORD/Siemans/JOHNSON CONTROL)

SITC of fault isolator Module with termination preferably after every 20–30 devices and shall be able to isolate electrical short circuit in the wiring etc. as required and Duly Approved by EN54/UL (EDWORD/Siemans/JOHNSON CONTROL)

SITC of Analog Addressable Type Manual Call Point having Surface or flush mounting Option fully complaint to EN54 having Rotary Decade Swicthes for Addressing from 01-99 complete with Back Box for Mounting Complete as required conforming to BS5839 Standards and Duly Approved by EN54/UL (EDWORD/Siemans/JOHNSON CONTROL)

SITC of Sounder Cum Strobe complete with Mounting Base as required conforming to BS5839 Standards and Duly Approved by EN54/UL (EDWORD/Siemans/JOHNSON CONTROL)

SITC of Output control module for Lift,Ahu,pressure fan/Exast fan etc.

SITC of input monitor module for FA panel intigration with fire fighting flow switch.

2Core 1.5 Sqmm Copper Aromerd Cable FRLS including the cost of petty material required to complete the work upto the entire satisfaction of Engineer In Charge.

SITC of Digital Hybrid IP-PBX System configured for 08 Analog Trunk Connectivity, 24 Digital Extensions, 140 Analog Extensions. It should be possible to reach the capacity of system to 240 ports and 999 IP users without any add-on CPU or chassis/hardware platform. System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments. It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The system shall have built-in web based software programming tool for system administration. The call ringing sequence would be programmable and have options such as simultaneous, hunting off, round robin and delayed simultaneous.The system shall support flexible numbering for extensions such as it may have extensions with 1 digit, 2 digits and up to 6 digits numbers as well as in combination of all.The system should have built-in outgoing Call Log buffer of 6000 calls, incoming call log buffer of 5000 and call log buffer of 1000 internal calls. Operator features shall have the assistance to extension, attended call transfer, call intercept, indication of call waiting, night service control etc. should be available by default. Make Panasonic/Philips/ NEC / AVAYA / CISCO/ SEIMENS/Matrix

Sutable Key Telephone set above exchange complete With Patch cords

S/I/T/C of MDF Box for telephone distribution system complete with necessary connections in all respect.-20 Pair

S/I/T/C of MDF Box for telephone distribution system complete with necessary connections in all respect.-50 Pair

S/I/T/C of MDF Box for telephone distribution system complete with necessary connections in all respect.-100 Pair

Design, manufacture, supply, erection, testing and commissioning of B Class DG exhaust piping of following size suitable for above mention DG sets including Anti vibration mounting arrangement ,Structural load support, Steel bracket including foundation ,foundation bolts to avoid any load and stress on turbo charger/exhaust pipe , supports for maintenance . This structure shall be designed as per prevaling indian standard for earthquake , wind velocity, gravity loads,temperature loads at site. Item Include welding, cutting and fixing of require acessories , 2 layers of anti-coating primer with 2 layers of silver paint etc whereever require .exhauts piping work include the insulation of silencer and exhaust pipe with rain trap to avoid rain water entry in pipe and inspection spout at suitable location.The grade of pipe/class should be suitable to relevant latest applicable code in addition to technical specifcation and CPCB. These are the minimum requirements , work should be completed in line requirements of DG manufacturer recommendation as per site requirement ,Complete in all resepct as :- .Supply, erection, testing and commissioning of MS exhaust piping vertical run as per IS 3589and 1239 of following sizes with welding joint including bends, MS pipe, clamps, dash fastener, nuts, bolts etc. with insulation by applying MAS-17 adhesive then first layer of insulation 25mm thick ceramic fibre wool (96Kg/Cub. Mtr.) and second layer minimum 100mm thick rockwool(150Kg/Cub Mtr.) covered with 24 SWG aluminium sheet claddings etc. complete as required and as per specifications. 200 mm dia. NB (4.85mm Thickness)

Supply and Fixing of SS expansion joints for horizontal/ vertical exhaust pipes as required at site: 200 mm dia. NB (4.85mm Thickness).

APPROVAL OF STATUTORY AUTHORITY: Preparation of drawings/documents in required sets to be submitted to statutory authority, obtaining approval/permission of electrical installation for operation of DG Sets as standby source, including Liasioning with Electrical Inspector/Local Supply Authority/Pollution Control Board etc. complete as required.

HT SWITCHGEAR OUTDOOR TYPE 11kV 630Amps 20kA for 3 sec. and tested for 20kA/ 1 sec internal arc , SF6 insulated Non-Extensible Compact switchgear consisting of One No. Direct Module for Incomer and one No. of Fixed Manual Vacuum Circuit Breaker in SF6 insulated Stainless steel enclosure with series trip,self powered microprocessor based numerical over current and Earth Fault (IDMT plus Inst.) relay protection along with. Interconnection between HT switchgear and transformer shall be using 1Cx3x240 sq.mm Al. unarmorured XLPE Cable. NEAR METER ROOM

LIFT PANEL 100A 4 pole Automatic changeover switch from main to Dg and vice versa. Incomer 100A, TPN MCCB 25KA - 1No. 1 No. Digital 96 sq. mm voltmeter with selector switch and 2A control MCB 1 No. Digital CT operated 96 sq. mm Ammeter with selector switch 1 Set of 3 Nos. of phase indication lamps LED type with 2A control MCB BUSBARS 125A, TPN Aluminium busbars, including making necessary connections OUTGOINGS 63A, 4P MCB 10KA with 63A 4P ELCB- 6Nos. 63A, 4P MCB 10 KA- 2No. Comon area panel as described as per above specifications grouted, installed and tested complete as required.

Supply, installation, testing and commissioning of BMS Computer System: i7 Processor, latest generation or Equivalet Server PC, Intel(R) Xeon(R) Processor, 2.93GHz, 4MB Cache with 16 GB RAM, and 1 TB SSD, 10/100 Mbps Ethernet card, USB connection and internal modem, Microsoft(R) Windows(R) 10 OS Professional Enterprise or latest, Web server software, DVD-ROM Drive (with RAM), 100/1000 Mbps NIC for Network connection and anti virus software as per Tender Specifications. Accessories included 32 Inch LED Screen, Optical Mouse and Key Pad, Windows Licensed software compatible with the above BMS System configuration complete as required.

Laserjet A4 Black and White printer

Supply, installation, testing and commissioning of 24 Port Layer 2 switch, with SFP Module, rack mountable and other termination accessories (Like Pigtails / LIUs / Convertors / Patch Cord, Etc) complete as required.

Supply, installation, testing and commissioning of High-quality CAPACTIVE touch 7.0`` panels for technical on-site operation of plants as well as room operation. The Touch Panel shall have integrated web server and a BACnet/ IP web interface to connect a HTML5 browser to a device on the network. Generic operation and monitoring of plant functions (alarms, schedulers, calendars, set point changes, display of actual values, etc.) Honeywell / Siemens)

Supply, installation, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, inbuilt web browser, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch, The controller shall have min 12 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). Honeywell / Siemens) The above shall be housed in vandal proof, lockable and secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion Honeywell / Siemens). Controller for Common Area

Supply, installation, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, inbuilt web browser, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch, The controller shall have min 12 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). Honeywell / Siemens) The above shall be housed in vandal proof, lockable and secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion Honeywell / Siemens). Controller for Ceiling Suspended AHU ( Max 5 Fans per DDC)

Supply, installation, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, inbuilt web browser, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch, The controller shall have min 12 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). Honeywell / Siemens) The above shall be housed in vandal proof, lockable and secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion Honeywell / Siemens). Controller for Basement ventilation Fans ( Max 5 Fans per DDC)

Supply, installation, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, inbuilt web browser, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch, The controller shall have min 12 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). Honeywell / Siemens) The above shall be housed in vandal proof, lockable and secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion Honeywell / Siemens). Controller for Smoke and Exhaust Fans (Max 4 Fans per DDC)

Supply, installation, testing and commissioning of True IP Based DDC Standalone 32 Bit Intelligent, inbuilt web browser, peer to peer communication, interoperable DDC as per the specification. The compact controller shall have inbuilt 2-port Ethernet switch, The controller shall have min 12 inputs/outputs inbuilt and can be expandable upto max 40 points by Input/Output Modules. The DDC shall have 300 Mhz processor with 128 MByte SDRAM (DDR3) and 512 MByte NAND Flash. The controller shall be freely programmable and have System functions (alarming, scheduling, trending, access protection with individually definable user profiles and categories). Honeywell / Siemens) The above shall be housed in vandal proof, lockable and secure MS Cabinets to be supplied along with all necessary switchgear protections as required. Number of controllers shall have spare capacity of 15% for future expansion Honeywell / Siemens). Controller for Electrical System LT/HT/Transformer/DG

Supply, installation, testing and commissioning of True IP Based BTL and UL Listed for third party integration. The controller shall have 2-port Ethernet switch, WLAN interface and Cloud Connectivity. It should have BTL label (BACnet communications passed the BTL test) and consisting of Dual microprocessor with Storage capacity of 1 GByte RAM. It should support Real Time clock upto 7 Days. It should Support of the major communication protocols: BACnet/IP, BACnet MS/TP, Modbus IP and Modbus RTU upto 500 points. (Note - Integrator shall be of same DDC make only.) Honeywell / Siemens) Integration of VRV System on BACnet/IP Integration of AHU VFD on Modbus over RS485 Integration of UPS on Modbus over RS485 Integration of DG Sets on Modbus over RS485 Integration of HT Power Meter on Modbus over RS485 Integration of Energy Meters on Modbus over RS485 Integration of Lifts on Modbus over RS485 Integration of Hydroneumatuic Pumps VFDs on Modbus over RS485 Integration of FAS System on BACnet/IP

Outside Temperature and RH Sensor along with IP65 radiation shield for outdoor protection Measuring Accuracy at At 15…35 °C 0…100 % r.h.: ±2 % r.h

IBMS Field Instriment -PM 10 and PM 2.5 Sensor on Modbus

IBMS Field Instriment -DP Switch Air

IBMS Field Instriment -Duct Temperature Sensor Measuring Accuracy At -50…80 °C: ±0.7 K with Proble Length 400 mm

IBMS Field Instrument - Duct Static Pressure Sensor Measuring Range 0…200 Pa, 0…250 Pa, 0…500 Pa with DC 0...10 V output

IBMS Field Instrument - Current Relay

IBMS Field Instrument - Flameproof Level Switch

IBMS Field Instrument - Voltage Transducer

IBMS Field Instrument -Water pressure sensor

IBMS Field Instrument - Bi Level Switch

IBMS Cabling nd conduiting- Supply and laying of 2 Core 1.0 Sqmm Annealed Tinned Copper, Twisted pair, Shielded unarmoured cable for signal and power as per specifications

IBMS Cabling and conduiting - Supply and laying of 4 Core 1.0 Sqmm Annealed Tinned Copper, Twisted pair, Shielded unarmoured cable for signal and power as per specifications

IBMS Cabling and conduiting - Supply and laying of GI Flexible 25 mm

VRV/VRF TYPE OUTDOOR TFA UNITS: (Tailor made TFA units and shall be procured from other vendors duly approved by the manufacturer of the VRV units) Double skin Treated Fresh Air unit with VRV Compatible DX cooling coil. Supply, installation, testing and commissioning of double skin construction Horizontal/Vertical floor/Floor mounted(as per approved shop drawing and specifications) draw/blow through type DX TFA units fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside and 0.6 mm plain galvanised steel sheet inside: each complete (Wherever specified) low leakage aluminium aerofoil gear driven VCD and fire resistant neoprene flexible connection at outlet, pre-filter section with filters of non woven synthetic media (efficiency 90% down to 10 microns MERV-8) , coil section having min 8 Row Deep DX type coil of copper tube and aluminium fins construction alongwith distributor of suitable size. Coil shall have copper header and supporting frame work/End plates in SS 304 construction polished SS 304 drain pan made out of 22G sheet duly insulated complete with squirrel cage induction VFD Compatible motor, belt driven centrifugal backward curved fan or direct driven plug fan with vibration isolators. Coil size shall be selected for a maximum face velocity of 450 feet/minute and fan outlet velocity shall be limited to 1800 FPM. Motor shall be atleast IE 2 rated suitable for 415±10% volts, 50 cycles, 3 phase AC supply, meeting criterion as per ASHRAE standard 90.1-2010 and high efficiency. The AHU panels shall be insulated with minimum 40 mm thick and 40± 2 Kg/m³ density PU foam and shall have thermal break. The motor and blower assembly shall be mounted on aluminium extruded section only.Total static pressure shall be checked by vendor,change in static pressure will not attract any price implication.Fan capacities shall be based on minimum 20 mm external static pressure as mentioned below .The TFA shall be complete in all respects along with accessories as per specifications. The capacity of air handling units shall be as follows:MAKE-BLUESTAR/CARRIER/DAIKIN Outdoor Rating HP - 12

VRV/VRF TYPE OUTDOOR TFA UNITS: (Tailor made TFA units and shall be procured from other vendors duly approved by the manufacturer of the VRV units) Double skin Treated Fresh Air unit with VRV Compatible DX cooling coil. Supply, installation, testing and commissioning of double skin construction Horizontal/Vertical floor/Floor mounted(as per approved shop drawing and specifications) draw/blow through type DX TFA units fabricated out of extruded aluminium section with 0.6 mm pre-plasticized / pre-coated Galvanised steel sheet outside and 0.6 mm plain galvanised steel sheet inside: each complete (Wherever specified) low leakage aluminium aerofoil gear driven VCD and fire resistant neoprene flexible connection at outlet, pre-filter section with filters of non woven synthetic media (efficiency 90% down to 10 microns MERV-8) , coil section having min 8 Row Deep DX type coil of copper tube and aluminium fins construction alongwith distributor of suitable size. Coil shall have copper header and supporting frame work/End plates in SS 304 construction polished SS 304 drain pan made out of 22G sheet duly insulated complete with squirrel cage induction VFD Compatible motor, belt driven centrifugal backward curved fan or direct driven plug fan with vibration isolators. Coil size shall be selected for a maximum face velocity of 450 feet/minute and fan outlet velocity shall be limited to 1800 FPM. Motor shall be atleast IE 2 rated suitable for 415±10% volts, 50 cycles, 3 phase AC supply, meeting criterion as per ASHRAE standard 90.1-2010 and high efficiency. The AHU panels shall be insulated with minimum 40 mm thick and 40± 2 Kg/m³ density PU foam and shall have thermal break. The motor and blower assembly shall be mounted on aluminium extruded section only.Total static pressure shall be checked by vendor,change in static pressure will not attract any price implication.Fan capacities shall be based on minimum 20 mm external static pressure as mentioned below .The TFA shall be complete in all respects along with accessories as per specifications. The capacity of air handling units shall be as follows:MAKE-BLUESTAR/CARRIER/DAIKIN ODU - (for TFA of fresh air supply ) HP-6

VRV/VRF TYPE INDOOR UNITS : (To be supplied by same manufacturer of outdoor units) Recirculation type Supply,Installation,testing and commissioning of Ceiling hung type 4/1 way Cassette VRF AC units complete with controls prefilter, fan section, DX Coil section and all accessories with fittings as per specification as required. MAKE-BLUESTAR/CARRIER/DAIKIN CFM 865 Capacity- 2.57 TR

HVAC-FITTINGS and CONTROLLERS SITC of Wired Remote Controller for Indoor Units with suitable wiring (1.0sqmm x 2C) in PVC conduit

HVAC-FITTINGS and CONTROLLERS SITC of Centralized remote controller suitable for operation and monitoring of indoor units (106 nos.units). Controller shall be capable of scheduling and BMS compatible.

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. All piping inside the builing shall be properly supported with Trays and all External piping shall be supported with covered type Tray (Tray Quantified separately for the same). The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 34.9 mm O.D - 19 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 28.6 mm O.D - 19 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 22.2 mm O.D - 13 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 19.1 mm O.D - 13 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 15.9 mm O.D - 13 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 12.7 mm O.D - 13 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 9.5 mm O.D - 13 mm thick insulation

SITC of interconnecting following sizes of hard/ soft drawn seamless refrigerant copper pipe work as per Air Conditioning norms with Y-Joints/Refnets (Considered in separate item and will be paid under that relevant item) and silver soldering joints as required at site and as per specifications insulated with `O` class closed cell electrometric nitrile rubber tubular insulation of fire retardant grade of conductivity less than 0.22 Btu.in/(h.ft² °F) and density 50kg/CMT with thickness 13mm up to 25mm dia pipe and with 19mm for more than 25mm dia pipe between indoor units and Outdoor units as per specifications. The Refrigerant pipe sizes and thickness shall be as per manufacturer`s standard. It should be complete as per technical specifications. Outdoor Piping insulation shall have two coats of special UV Resistant Paint (UV Resistant paint shall be quantified separately) Pipe sizes shall be as follows: 6.4 mm O.D - 13 mm thick insulation

HVAC-CONTROL CABLING Providing and fixing control cum transmission wiring of 2 core x 1.5 sqmm copper in suitable 25 mm dia heavy duty PVC conduits or wall chase between indoor units and outdoor units and indoor units and remote controllers.

HVAC- Condensate Drain Piping Providing and Fixing UPVC6kg/cm² pipes of various sizes with 6mm nitrile insulation for condensed water drainage from indoor unit to nearest disposal point in Toilet/Outside rain water harvesting system as per specification 25 mm dia pipe

HVAC- Condensate Drain Piping Providing and Fixing UPVC6kg/cm² pipes of various sizes with 6mm nitrile insulation for condensed water drainage from indoor unit to nearest disposal point in Toilet/Outside rain water harvesting system as per specification 32 mm dia pipe

HVAC- Condensate Drain Piping Providing and Fixing UPVC6kg/cm² pipes of various sizes with 6mm nitrile insulation for condensed water drainage from indoor unit to nearest disposal point in Toilet/Outside rain water harvesting system as per specification 40 mm dia pipe

Supply, Installation testing and commissioning of Vane Axial Fans with impeller having adjustable pitch angle blades and complete with suitable TEFC motor, Casing Shall be GSS/MS with powder coated and drive assembly. Single piece Long Casing (Motor should completely be accommodated inside the fan casing) Axial Fans shall be licensed to bear the AMCA Seal. Multi piece casing is not accepted. Guide Vanes shall be integral part of Fan casing it shall not be attached as an accessory. The fan shall be suitable for ceiling/floor installation along with spring isolators or as recomended by the manufacturer. Fan motor shall be VFD compatible and shall be of high efficiency Class EFF-1(Only for normal working fans). Motor shall be suitable for 415 ± 10% V, 3 Phase, 50 ± 3%Hz electrical supply.Fan and motor shall be selected for minimum 20mm Static pressure.Total static pressure shall be checked by vendor. Change in static pressure will not attract any price implication. The complete fan assembly alongwith the motor and drive assembly shall be fire rated i.e. should be tested and certified for 250 Deg C for 2 hour in accordance to standard `BSEN12101-3:2015 from TUV SUD PSB Singapore or equivalent internationally recognized fire laboratory and meet the duty parameters.The fan shall be selected for low noise level and low RPM as per technical specifications. Fans shall be AMCA Certified and Fan Efficiency Grade ( Min FEG 71, lesser is not acceptable).Thickness of the casing shall not be less than: For Dia (300 to 650) mm – 2mm, Dia (700 to 1140) mm – 3 mm, Dia (1200 to 1400) mm – 4mm and Dia 1600 – 5 mm. All fans after assembly shall be dynamically trim-balanced to ISO1940 and AMCA 204/3 - G2.5 quality grade. Sound level for normal and emergency application fans should not exceed 80 DB(A) @ 3 meter (Room Condition) .Incase of not achieving sound , attenutor has to be added. Outlet velocity of the fans should not exceed 13 m/s for normal application and 16 m/s for emergency application. Fan RPM shall not exceed 2850 upto 3500 CFM and 1450 above 3500 CFM. Price shall also include double sleeve fire retardant flexible connection on both sides of the fan. The fan duty shall be as follows: (Rootair,Humidim,Zeco)` FAN CFM 7400 MOTOR KW 1.81

Hi Wall Type: `Supply, installation, Testing and Commissioning of Hi Wall Type Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, electronic expansion valve, outer cabinet, drain pan with drain pump kit, insulation, pipe connections etc. of various capacities including supporting arrangement with suitable vibration isolator as per specifications and drawings.The cost shall include the cost of power and control cabling and earthing from ODUs to Indoor Units as per drawing including plug top suitable for 15 A/3 pins socket. Indoor unit should have capability to provide cooling/heating as per seasonal weather changes.MAKE-LG/BLUESTAR/CARRIER/DAIKIN` CFM 530 TR 1.60

Ceiling Mounted Ductable Type: `Supply, installation, Testing and Commissioning of  Ceiling Mounted Duct Type  Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, electronic expansion valve, outer cabinet, drain pan with drain pump kit, insulation, pipe connections etc. of various capacities including supporting arrangement with suitable vibration isolator as per specifications and drawings.The cost shall include the cost of power and control cabling and earthing from ODUs to Indoor Units as per drawing including plug top suitable for 15 A/3 pins socket. Indoor unit should have capability to provide cooling/heating as per seasonal weather changes.MAKE-LG/BLUESTAR/CARRIER/DAIKIN` The units shall be suitable for 230V±6%, 50 Hz. supply and complete with electrical controls and panels. CFM TR Ceiling Suspended AHU 4675 10.90

VRV/VRF TYPE INDOOR UNITS: (Treated fresh air units) Ceiling Mounted Ductable Type: Supply, installation, Testing and Commissioning of  Ceiling Mounted Duct Type  Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, electronic expansion valve, outer cabinet, drain pan with drain pump kit, insulation, pipe connections complete with blower section with blower suitable for static pressure as required, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.4mm) cooling coil of 8 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters efficiency 90% down to 10 micron (MERV 8) and Fine filter (Bag filters) efficiency 99% down to 3 micron (MERV 13), belt drive package with TEFC drive motor suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply, drain connections, stainless steel (18G) drain pan with insulation, necessary vibration isolation arrangement etc. complete as required of following capacities MAKE-LG/BLUESTAR/CARRIER/DAIKIN The units shall be suitable for 230V±6%, 50 Hz. supply and complete with electrical controls and panels. AREA TFA AHU (CFM) 2650 CFM TONNAGE (TR) 10 IDU - (for TFA of fresh air supply to MEETING ROOM)

HVAC- GSS VOLUME CONTROL DAMPER Supply, installation, testing and balancing of opposed multiblade box type GI volume control damper within ducts to be provided with suitable links, levers and quadrants for manual control of volume of air flow and for proper balancing of the air distribution system as per approved shop drawings and specifications.(All AHUs, fan sections VCD at machine outlets shall be included in the equipment cost only)(Aalatech,ductofeb,Zeco)

FIRE DAMPERS Supply, installation, testing and commissioning of multi blade sleeve type combined motorised fire and smoke dampers with spring return actuator. The damper shall be of atleast 1.5 hr. fire rating. The damper shall be as per CBRI approval.The damper shall be constructed out of 16G galvanised sheet steel. It shall be complete with control panel, spring return actuator, sensor . Cost to include control cabling between firedamper control panel , actuator and fan starter panel for necessary inter-locking / for tripping of AHU fan motor.The fire dampers shall be installed at locations shown in approved shop drawings and as per specifications.(Aalatech,ductofeb,Zeco) Smoke and Fire Dampers.

HVAC-SUPPLY GRILL Supply, installation, testing and balancing of removable core type , linear, fixed bar extruded aluminium powder coated Supply Air / Return Air / Exhaust Air grills, normal flow, 15° angle one way / two way deflection with all sides flanges.Blade thickness shall be minimum 5mm in front and 1.0 mm in rear side.Grills shall be supplied in accordance with specifications and approved shop drawings.(Aalatech,ductofeb,Zeco) 200 mm/150mm/100mm High Sqm 50

EXHAUST/RETURN GRILL Supply, installation, testing and balancing of removable core type , linear, fixed bar extruded aluminium powder coated Supply Air / Return Air / Exhaust Air grills, normal flow, 15° angle one way / two way deflection with all sides flanges.Blade thickness shall be minimum 5mm in front and 1.0 mm in rear side.Grills shall be supplied in accordance with specifications and approved shop drawings.(Aalatech,ductofeb,Zeco) 200 mm/150mm/100mm High Sqm 50

HVAC- BIRD SCREEN Supply, installation, testing and balancing of factory made Bird screen made out of galvanized steel mesh in 20G having diamond pattern with GSS flanges and necessary cross bracings suitable for Fresh/ Exhaust air fans on terrace, complete as per specification and approved shop drawings.(Aalatech,ductofeb,Zeco)

HVAC-Air Purification System (Plasma Ionization with Nano Filter) `The Active Air Purification system should consist of Supply, Installation, Testing and commissioning of Bipolar Ionisation System. The Bipolar Ionisation System must be a combination of Tube Based Model and Needle Point Model (Needle Point should have Nitinol (nickel titanium) Needles) and Carbon Fibre Brush Model, System should produce positive and negative ions for creating a Bio Climate rich in ions and hence neutralising harmful pollutants including pathogens, Volatile Organic Compounds and Particulate Matter. The Carbon Brush self-balancing ionizer should be installed at the fan inlet of fan coil units, VRF cassettes, ductless splits , AHU and Ductable HVAC System. These ionizers should be self-contained in a potted ABS box with a moulded flange and mounting holes and is protected with an inline 500mAglass cartridge fuse. The Needle Point Ionizer should be automatic cleaning needlepoint ionizer producing positive and negative ions that neutralize harmful pollutants and odours in the occupied space. The Needle Point compact unit Should automatically remove dust and dirt build-up on the emitters eliminating the need for any maintenance. The Unit can be easily mounted at the fan inlet of any air handling system, including RTU`s, ptacs, mini-splits, fan coil units and VRF systems. The Unit should accept 12-24 VAC/DC. The Tube Based Model should be a single-tube or double tube or 5 tube unit that can be installed in ductwork utilizing the pre-drilled flange and factory applied gasket. The installer makes a duct cut out and secures the unit with self-tapping sheet metal screws. The unit can also be installed inside an AHU, Treated Fresh Air unit, Heat Recovery Ventilation Unit, utilizing a contractor supplied mounting bracket. Power to the ionization unit should be interlocked with system fan operation. The power input fitting provides easy disconnection of the power supply for servicing the unit. A five position ion level control knob varies the ion output between 50% and 100%. The Life of Tube should be minimum 17600 working hours.` `The Active Air Purification system should consist of Supply, Installation, Testing and commissioning of Bipolar Ionisation System. The Bipolar Ionisation System must be a combination of Tube Based Model and Needle Point Model (Needle Point should have Nitinol (nickel titanium) Needles) and Carbon Fibre Brush Model, System should produce positive and negative ions for creating a Bio Climate rich in ions and hence neutralising harmful pollutants including pathogens, Volatile Organic Compounds and Particulate Matter. The Carbon Brush self-balancing ionizer should be installed at the fan inlet of fan coil units, VRF cassettes, ductless splits , AHU and Ductable HVAC System. These ionizers should be self-contained in a potted ABS box with a moulded flange and mounting holes and is protected with an inline 500mAglass cartridge fuse. The Needle Point Ionizer should be automatic cleaning needlepoint ionizer producing positive and negative ions that neutralize harmful pollutants and odours in the occupied space. The Needle Point compact unit Should automatically remove dust and dirt build-up on the emitters eliminating the need for any maintenance. The Unit can be easily mounted at the fan inlet of any air handling system, including RTU`s, ptacs, mini-splits, fan coil units and VRF systems. The Unit should accept 12-24 VAC/DC. The Tube Based Model should be a single-tube or double tube or 5 tube unit that can be installed in ductwork utilizing the pre-drilled flange and factory applied gasket. The installer makes a duct cut out and secures the unit with self-tapping sheet metal screws. The unit can also be installed inside an AHU, Treated Fresh Air unit, Heat Recovery Ventilation Unit, utilizing a contractor supplied mounting bracket. Power to the ionization unit should be interlocked with system fan operation. The power input fitting provides easy disconnection of the power supply for servicing the unit. A five position ion level control knob varies the ion output between 50% and 100%. The Life of Tube should be minimum 17600 working hours.` `The Active Air Purification system should consist of Supply, Installation, Testing and commissioning of Bipolar Ionisation System. The Bipolar Ionisation System must be a combination of Tube Based Model and Needle Point Model (Needle Point should have Nitinol (nickel titanium) Needles) and Carbon Fibre Brush Model, System should produce positive and negative ions for creating a Bio Climate rich in ions and hence neutralising harmful pollutants including pathogens, Volatile Organic Compounds and Particulate Matter. The Carbon Brush self-balancing ionizer should be installed at the fan inlet of fan coil units, VRF cassettes, ductless splits , AHU and Ductable HVAC System. These ionizers should be self-contained in a potted ABS box with a moulded flange and mounting holes and is protected with an inline 500mAglass cartridge fuse. The Needle Point Ionizer should be automatic cleaning needlepoint ionizer producing positive and negative ions that neutralize harmful pollutants and odours in the occupied space. The Needle Point compact unit Should automatically remove dust and dirt build-up on the emitters eliminating the need for any maintenance. The Unit can be easily mounted at the fan inlet of any air handling system, including RTU`s, ptacs, mini-splits, fan coil units and VRF systems. The Unit should accept 12-24 VAC/DC. The Tube Based Model should be a single-tube or double tube or 5 tube unit that can be installed in ductwork utilizing the pre-drilled flange and factory applied gasket. The installer makes a duct cut out and secures the unit with self-tapping sheet metal screws. The unit can also be installed inside an AHU, Treated Fresh Air unit, Heat Recovery Ventilation Unit, utilizing a contractor supplied mounting bracket. Power to the ionization unit should be interlocked with system fan operation. The power input fitting provides easy disconnection of the power supply for servicing the unit. A five position ion level control knob varies the ion output between 50% and 100%. The Life of Tube should be minimum 17600 working hours.` Product should have UL 867 and UL 2998 certification (for zero ozone emission). The OEM shall have Efficacy test report on COVID from any Internationally/Nationally recognised Laboratory Product should have UL 867 and UL 2998 certification (for zero ozone emission). The OEM shall have Efficacy test report on COVID from any Internationally/Nationally recognised Laboratory Product should have UL 867 and UL 2998 certification (for zero ozone emission). The OEM shall have Efficacy test report on COVID from any Internationally/Nationally recognised Laboratory The System should be capable of providing periodic Preventive maintenance for automated after sales support service in form of notification/alerts and user interaction through dashboard application. The System should be capable of providing periodic Preventive maintenance for automated after sales support service in form of notification/alerts and user interaction through dashboard application. The System should be capable of providing periodic Preventive maintenance for automated after sales support service in form of notification/alerts and user interaction through dashboard application. Supplier must have experience of more than 3 years of executing projects with the same technology products. and have done at least 3 multi-location projects (Private Or Government) Pan India and Minimum Value of each project must be at Least 50 Lac. Supplier must have experience of more than 3 years of executing projects with the same technology products. and have done at least 3 multi-location projects (Private Or Government) Pan India and Minimum Value of each project must be at Least 50 Lac. Supplier must have experience of more than 3 years of executing projects with the same technology products. and have done at least 3 multi-location projects (Private Or Government) Pan India and Minimum Value of each project must be at Least 50 Lac. System should be fitted with Fine Filter Media with very less static drop acceptable upto 5 mmwg of Initial pressure drop wherever requires. System should be fitted with Fine Filter Media with very less static drop acceptable upto 5 mmwg of Initial pressure drop wherever requires. System should be fitted with Fine Filter Media with very less static drop acceptable upto 5 mmwg of Initial pressure drop wherever requires. Following Certifications are mandatory to produce  Following Certifications are mandatory to produce  Following Certifications are mandatory to produce  The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer must be UL 2043 certified. The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer must be UL 2043 certified. The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer must be UL 2043 certified. ·         The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer must have UL-2998 Certification for Safety against Zero Ozone Emission as per recommendation by ASHRAE. ·         The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer must have UL-2998 Certification for Safety against Zero Ozone Emission as per recommendation by ASHRAE. ·         The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer must have UL-2998 Certification for Safety against Zero Ozone Emission as per recommendation by ASHRAE. ·         The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer and Tube Based Model Should be tested on UL or Intertek/ETL to prove conformance to UL 867 for electronic devices. ·         The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer and Tube Based Model Should be tested on UL or Intertek/ETL to prove conformance to UL 867 for electronic devices. ·         The Carbon Brush and Self Cleaning nickel titanium based Needle Point Bipolar Ionizer and Tube Based Model Should be tested on UL or Intertek/ETL to prove conformance to UL 867 for electronic devices. Other Product Certifications required are ISO16000 , CSA C22.2# 187, and CARB. Other Product Certifications required are ISO16000 , CSA C22.2# 187, and CARB. Other Product Certifications required are ISO16000 , CSA C22.2# 187, and CARB. `Manufacturers shall provide Test report from Internationally/Nationally recognized Lab for proven efficacy on below pathogens with minimum kill rates for the following pathogens given the allotted time and in a space condition: a) SARS-CoV-2 (COVID-19) Human Strain b) MS2 Bacteriophage (Surrogates COVID-19) c) Omicron Variant of SARS-CoV-2 d) H1N1 e) Total Bacterial Count Reduction rate of more than 90% from NABL Accredited Lab f) Yeas and Mold/Total fungal count Reduction rate of more than 90% from NABL Accredited Lab ` `Manufacturers shall provide Test report from Internationally/Nationally recognized Lab for proven efficacy on below pathogens with minimum kill rates for the following pathogens given the allotted time and in a space condition: a) SARS-CoV-2 (COVID-19) Human Strain b) MS2 Bacteriophage (Surrogates COVID-19) c) Omicron Variant of SARS-CoV-2 d) H1N1 e) Total Bacterial Count Reduction rate of more than 90% from NABL Accredited Lab f) Yeas and Mold/Total fungal count Reduction rate of more than 90% from NABL Accredited Lab ` `Manufacturers shall provide Test report from Internationally/Nationally recognized Lab for proven efficacy on below pathogens with minimum kill rates for the following pathogens given the allotted time and in a space condition: a) SARS-CoV-2 (COVID-19) Human Strain b) MS2 Bacteriophage (Surrogates COVID-19) c) Omicron Variant of SARS-CoV-2 d) H1N1 e) Total Bacterial Count Reduction rate of more than 90% from NABL Accredited Lab f) Yeas and Mold/Total fungal count Reduction rate of more than 90% from NABL Accredited Lab ` Make :-IntelliGreen/Air Ultra/ A K Enterprises Make :-IntelliGreen/Air Ultra/ A K Enterprises Make :-IntelliGreen/Air Ultra/ A K Enterprises

AIRHANDLING UNIT/AIR WASHER/AIR SCRUBBER/SMOKE EXTRACTION FAN STARTER PANEL Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted Fan starter panels including anchoring into the wall with following details: All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate operation through BAS. All starters shall be provided with potential free Contacts for Connections to Building Automation System. The panel shall include the following components and accessories. 14G CRCA Powder Coated panel enclosure with earthing studs and hinged locable doors. IP52 Protection, suitable for 415V, 3 Phase, 4 wire, 50Hz system. Incomer switch shall be TP MCCB (motor duty) of required rating and 20KA fault withstand capacity. MCCB shall be with overload and short circuit protection. R,Y,B LED Type Phase indication lamps with control MCB`s. ON`/OFF/TRIP Indication LED Type lamp with control MCB. Digital voltmeter and digital ammeter with in built selector switches. DOL/Star-delta starter for the ratings given below complete with contactors, over load relay with built in single phase protection. Starter shall be BMS compatible for Remote ON/Off and status monitoring complete with Auto/manual switch. For on/off/remote and local operation, 3 pole single throw switch shall be provided in each Fan panel to facilitate override of the automatic operation. A fire detection relay module for switching `ON` of Fan motor on receiving fire signal and fire damper interlocking. Necessary nos. of auxillary contactors and Relays shall be included in cost as required for the interlocking with AHU fan motor and motorised firedampers. 240/24V AC Step down transformer for powering 24V AC auxillary relay. 3 Nos of Single Pole MCB`s Shall be provided at the incoming section of the starter panel for DDC Panel , fire damper actuator and AHU limit switch/Bulk head lighting.(1Nos. Additional to be considered for Scrubber and Airwasher panels only) Terminal block for power distribution. Note: Vendor to include the cost of all related power and control cabling on GI cable tray along with copper earthing , from Airhandling units,Axial flow fan motors, air washers and scrubbers to control panels. Fire operation fans shall have fire survival cable of suitable size (For sizes of cables, refer to the detailed specifications of Electrical section). DOL starters upto 5.5 KW and beyond star-delta starter shall be considered. The Nos. of Fan control panels/starters shall be as per KW ratings given below: Suitable rating MCCB ,Starter Panel for 2.2 KW Motor

AIRHANDLING UNIT/AIR WASHER/AIR SCRUBBER/SMOKE EXTRACTION FAN STARTER PANEL Design, manufacture, supply, installation, testing and commissioning of the following cubicle type, dead front, sheet steel, wall mounted Fan starter panels including anchoring into the wall with following details: All outgoing shall be provided with Stop / Manual /Auto selector switch to facilitate operation through BAS. All starters shall be provided with potential free Contacts for Connections to Building Automation System. The panel shall include the following components and accessories. 14G CRCA Powder Coated panel enclosure with earthing studs and hinged locable doors. IP52 Protection, suitable for 415V, 3 Phase, 4 wire, 50Hz system. Incomer switch shall be TP MCCB (motor duty) of required rating and 20KA fault withstand capacity. MCCB shall be with overload and short circuit protection. R,Y,B LED Type Phase indication lamps with control MCB`s. ON`/OFF/TRIP Indication LED Type lamp with control MCB. Digital voltmeter and digital ammeter with in built selector switches. DOL/Star-delta starter for the ratings given below complete with contactors, over load relay with built in single phase protection. Starter shall be BMS compatible for Remote ON/Off and status monitoring complete with Auto/manual switch. For on/off/remote and local operation, 3 pole single throw switch shall be provided in each Fan panel to facilitate override of the automatic operation. A fire detection relay module for switching `ON` of Fan motor on receiving fire signal and fire damper interlocking. Necessary nos. of auxillary contactors and Relays shall be included in cost as required for the interlocking with AHU fan motor and motorised firedampers. 240/24V AC Step down transformer for powering 24V AC auxillary relay. 3 Nos of Single Pole MCB`s Shall be provided at the incoming section of the starter panel for DDC Panel , fire damper actuator and AHU limit switch/Bulk head lighting.(1Nos. Additional to be considered for Scrubber and Airwasher panels only) Terminal block for power distribution. Note: Vendor to include the cost of all related power and control cabling on GI cable tray along with copper earthing , from Airhandling units,Axial flow fan motors, air washers and scrubbers to control panels. Fire operation fans shall have fire survival cable of suitable size (For sizes of cables, refer to the detailed specifications of Electrical section). DOL starters upto 5.5 KW and beyond star-delta starter shall be considered. The Nos. of Fan control panels/starters shall be as per KW ratings given below: Suitable rating MCCB ,Starter Panel for 5.5 KW Motor

HVAC- Electrical work-Cables from Isolators to each of ODUs Supplying and laying of following 1100 volt grade XLPE insulated PVC sheathed Copper conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. The cost of cable shall include the cost of cable tray. 4 C x 25 sq.mm

HVAC- Electrical work-Isolator Switches With Metal Enclosure 63 A 2/3 pole isolator switch for equipments with sheet metal enclosure, rain protection etc. as required to suit the site condition. (Enclosure shall be suitable for out door installation).

HVAC- Electrical work-Isolator Switches With Metal Enclosure 100A ELCB (300mA),4pole switch for VRV Outdoor units with sheet metal enclosure, rain protection etc. as required to suit the site condition. (Enclosure shall be suitable for out door installation).

HVAC- Electrical work-Isolator Switches With Metal Enclosure 63A ELCB (300mA),4pole switch for VRV Outdoor units with sheet metal enclosure, rain protection etc. as required to suit the site condition. (Enclosure shall be suitable for out door installation).

HVAC- Electrical work-Isolator Switches With Metal Enclosure -40A ELCB (300mA),4pole switch for VRV Outdoor units with sheet metal enclosure, rain protection etc. as required to suit the site condition. (Enclosure shall be suitable for out door installation).

HVAC- Electrical work-Isolator Switches With Metal Enclosure -25A ELCB (300mA),4pole switch for VRV Outdoor units with sheet metal enclosure, rain protection etc. as required to suit the site condition. (Enclosure shall be suitable for out door installation).

HVAC-Ceiling Suspended Ductable/AHU- Air purification for ceiling suspended Ductable indoor units and AHU The air purification system should be suitable to reduce harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens etc. based on below principle technology viz:Impingement, Polarisation and Agglomeration as a passive air It should be a slim structured unit specifically designed for integration in Return Air path of ceiling suspended indoor units, to centrally capture. It should be equivalent to Merv-14 or Higher efficiency for AHU and Ductable* Units with low pressure drop. It should have 3x working principles and it should be aluminium based or powder coated steel casing and should be self-contained. It should be a US patented technology with UL certified components. The units shall meet ANSI/ASHRAE 52.2 standards and have valid test report to verify filtration efficiency. The Basic Media of Electric Filter shall Carry Class 2 Fire Rating Listing by UL.The CAC filter/Electrostatic percipitator (ESP), which have Metal based collection plate shall not be accepted. The Supplier shall carry UL2998 certification or at least Acknowledgement letter from UL2998 for testing against Zero Ozone Emission. The system shall be integrated with the existing pre-section filter area of AHU. The test report for pressure drop need to be submitted for passive air purification and the same shall be demonstrated at site. Make :-IntelliGreen/Air Ultra/ A K Enterprises Electronic filters should consist of an Internet of Things (IoT) based Smart Filtration option employing a 3-Tier Architecture. This architecture would serve to identify pressure drops across the filter, indicating when a replacement is necessary due to clogged filters. Furthermore, it should gauge levels of filter blockage, enabling scheduled preventive maintenance to ensure sustainability. To facilitate user interaction, a well-designed UI/UX experience in the form of a dashboard is essential, complete with appropriate color-coding. Additionally, the system should generate alerts and notifications via text messages or emails to signal instances of filter clogging or the need for filter replacement. To enhance compatibility, the system must support various communication protocols, including options such as WiFi, Bluetooth Low Energy, Modbus RS485, or LoRaWAN.Make :-IntelliGreen/Air Ultra/ A K Enterprises 610*610*25

HVAC-Ceiling Suspended Ductable/AHU Air purification for ceiling suspended Ductable indoor units and AHU The air purification system should be suitable to reduce harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens etc. based on below principle technology viz:Impingement, Polarisation and Agglomeration as a passive air It should be a slim structured unit specifically designed for integration in Return Air path of ceiling suspended indoor units, to centrally capture. It should be equivalent to Merv-14 or Higher efficiency for AHU and Ductable* Units with low pressure drop. It should have 3x working principles and it should be aluminium based or powder coated steel casing and should be self-contained. It should be a US patented technology with UL certified components. The units shall meet ANSI/ASHRAE 52.2 standards and have valid test report to verify filtration efficiency. The Basic Media of Electric Filter shall Carry Class 2 Fire Rating Listing by UL.The CAC filter/Electrostatic percipitator (ESP), which have Metal based collection plate shall not be accepted. The Supplier shall carry UL2998 certification or at least Acknowledgement letter from UL2998 for testing against Zero Ozone Emission. The system shall be integrated with the existing pre-section filter area of AHU. The test report for pressure drop need to be submitted for passive air purification and the same shall be demonstrated at site. Make :-IntelliGreen/Air Ultra/ A K Enterprises Electronic filters should consist of an Internet of Things (IoT) based Smart Filtration option employing a 3-Tier Architecture. This architecture would serve to identify pressure drops across the filter, indicating when a replacement is necessary due to clogged filters. Furthermore, it should gauge levels of filter blockage, enabling scheduled preventive maintenance to ensure sustainability. To facilitate user interaction, a well-designed UI/UX experience in the form of a dashboard is essential, complete with appropriate color-coding. Additionally, the system should generate alerts and notifications via text messages or emails to signal instances of filter clogging or the need for filter replacement. To enhance compatibility, the system must support various communication protocols, including options such as WiFi, Bluetooth Low Energy, Modbus RS485, or LoRaWAN.Make :-IntelliGreen/Air Ultra/ A K Enterprises 610*305*25

Ceiling Suspended Ductable/AHU Air purification for ceiling suspended Ductable indoor units and AHU The air purification system should be suitable to reduce harmful pollutants like particulate matter (PMx), PM 2.5, allergens, pollen, smoke, bacteria, pathogens etc. based on below principle technology viz:Impingement, Polarisation and Agglomeration as a passive air It should be a slim structured unit specifically designed for integration in Return Air path of ceiling suspended indoor units, to centrally capture. It should be equivalent to Merv-14 or Higher efficiency for AHU and Ductable* Units with low pressure drop. It should have 3x working principles and it should be aluminium based or powder coated steel casing and should be self-contained. It should be a US patented technology with UL certified components. The units shall meet ANSI/ASHRAE 52.2 standards and have valid test report to verify filtration efficiency. The Basic Media of Electric Filter shall Carry Class 2 Fire Rating Listing by UL.The CAC filter/Electrostatic percipitator (ESP), which have Metal based collection plate shall not be accepted. The Supplier shall carry UL2998 certification or at least Acknowledgement letter from UL2998 for testing against Zero Ozone Emission. The system shall be integrated with the existing pre-section filter area of AHU. The test report for pressure drop need to be submitted for passive air purification and the same shall be demonstrated at site. Make :-IntelliGreen/Air Ultra/ A K Enterprises Electronic filters should consist of an Internet of Things (IoT) based Smart Filtration option employing a 3-Tier Architecture. This architecture would serve to identify pressure drops across the filter, indicating when a replacement is necessary due to clogged filters. Furthermore, it should gauge levels of filter blockage, enabling scheduled preventive maintenance to ensure sustainability. To facilitate user interaction, a well-designed UI/UX experience in the form of a dashboard is essential, complete with appropriate color-coding. Additionally, the system should generate alerts and notifications via text messages or emails to signal instances of filter clogging or the need for filter replacement. To enhance compatibility, the system must support various communication protocols, including options such as WiFi, Bluetooth Low Energy, Modbus RS485, or LoRaWAN.Make :-IntelliGreen/Air Ultra/ A K Enterprises IOT

HVAC-Indoor Air Quality Monitoring System- Supply, Installation, Testing and commissioning of IAQ Monitor to remotely measure the levels of PM 2.5, VOCs, CO2, Temperature, Humidity on a real time basis. The IAQ Monitor shall be capable of getting connected with Wi-Fi. The Monitor should be capable of sending the indoor air quality information on display Screen/Mobile/Workstation as per Client`s requirement. The Monitor should indicate the quality of air through changing the colours on the display screen as per the NAAQS standards and should meet the WELL building standards. The monitor should be a 3 tier architecture including sensor Hardware, secure cloud infrastructure, monitoring apps including dashboard, android/IOS. Quoted price shall be inclusive of all necessary arrangement as required to make the unit proper functional.The Monitor Should be Reset-second class B certified. The System should provide Soft Assistance in form of Notifications and Alerts for Periodic Preventive Maintenance. Make :-IntelliGreen/Air Ultra/ A K Enterprises

CCTV-Supply Installation Testing and Commissioning of 3 Core Power Cable 1.5 sqmm. Make: LEGRAND/AGILON/DALTON)

Supply, fabrication, Installation, testing and commissioning of factory fabricated rectangular/round/elliptical ducts using G.I Sheets (120GSM coating). The price shall include factory fabricated TDF flanges, turning vanes, splitter dampers, supports (factory fabricated, full threaded GI rod/hangers and G.I slotted channel), sealant, neoprene gasket, access door etc. The joints shall be with least leak and shall be tested with pressure testing machine. (Aalatech/ductofeb/Zeco) 24 gauge galvanized sheet steel ( TDF 01- 750mm)

Supply, erection, testing and commissionoing of PIR OCCUPENCY SENSOR upto entire satisfaction of the Engineer-in-charge

VRV/VRF TYPE INDOOR UNITS: (Treated fresh air units) Ceiling Mounted Ductable Type: Supply, installation, Testing and Commissioning of Ceiling Mounted Duct Type Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, electronic expansion valve, outer cabinet, drain pan with drain pump kit, insulation, pipe connections complete with blower section with blower suitable for static pressure as required, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.4mm) cooling coil of 8 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters efficiency 90% down to 10 micron (MERV 8) and Fine filter (Bag filters) efficiency 99% down to 3 micron (MERV 13), belt drive package with TEFC drive motor suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply, drain connections, stainless steel (18G) drain pan with insulation, necessary vibration isolation arrangement etc. complete as required of following capacities MAKE-LG/BLUESTAR/CARRIER/DAIKIN The units shall be suitable for 230V±6%, 50 Hz. supply and complete with electrical controls and panels. (CFM) 1045 CFM TONNAGE (TR) 4 IDU - (for TFA of fresh air supply )

SITC 150W LED Street Light. For High Mask. PF).95, System Wattage LED 150 W with Minium 120 lumens/watt in 5700k. The Fixture should be of Makes :-PHILIPS-/HAVELLS/WIPRO

Supply, erection, testing and commissioning of insulation by applying MAS-17 adhesive then layer of minimum 100mm thick rockwool(150Kg/Cub Mtr.) covered with 24 SWG aluminium sheet claddings etc. complete as required on silencer and as per specifications. Note : Silencer shall be part of standard supply with DG Set. For 400 KVA DG Set

LPS System- `Supply of Vertical Electrolytic Copper Lighting Arrester of 16 mm dia, 1000 mm long with Gun Metal base plate . Model : APSAT116A plus APSTB16-253 Make : APS /Hakel`

LPS system-`Supply 8 mm round aluminium conductor for horizontal lightning protection - run in roof. Model : AL8. Make : Hakel / APS`

LPS system-`Supply of roof conductor holder for 8 mm round aluminium conductor made of Gun Metal for horizontal installation. The distance between each holder should be min of 1 mtr. Model : APSRCS50. Make : Hakel / APS`

LPS system-GLUE - Glue is used to fix the conductor holder on roof.

LPS system-`Supply of T connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt. Model : APSTCRC50 , Make : Hakel /APS`

LPS system-`Supply of Cross connector for connecting of 8 mm Al round conductor . The connector should be of Gun Metal with SS nuts and bolt. Model : APSCCRC50 , Make : Hakel /APS`

LPS system-`Supply of Expansion piece along with connector to compensate the expansion of round 8 mm Al conductor when temperature variation . Connection should be in every 20 mtr. Model : APSEXP50 , Make : Hakel/APS`

LPS system-`Supply of connector for Expansion piece . The connector should be of Gun Metal with SS nuts and bolt. Model : APSPCRC50, Make : Hakel / APS`

LPS system-Supply of 6 digit lightning strike counter. Model - LEC06 Make - NEXUS.

LPS system-`Supply of Test Joint Point for 8 mm round aluminium conductor , the size should be of 25 x 3 x 150 mm copper in ABS boxes. Model : APSTLBCU. Make : Hakel / APS`

LPS system-`Supply of UL approved low carbon high tensile steel rod with copper coating of min 254 micron JK Chemrode - 317 CBR the dia should be 17.2 mm with length of 10 feet ( 3000 mm) . The rod shall be as per IEC 62561-2 and approved by UL 467. The rod shall be tested from NABL lab for current discharge not less then 46kA peak. The Chemrode shall be surrounded with 25 kg ( 1 bag) of Earth enhance materiel JK Reslow according to IEC 62561-7 and the Chemical resistance value shall not increase more then 0.067 Om and same will be tested from NABL lab. along with earth pit chamber made up polyplastic. Size of -254x330x260 MM (Model- PPC01) Make :APS/JK/Hakel `

LPS system-Supply of Copper Flat of size 25 x 3 mm for connecting of Earthing.

Lift- `Supply Installation testing and commissioning of Passenger (1020 Kg, 15 persons.) Machine Room Less Gearless Elevator with 3 year free comprehensivie warranty period to be supplied and installed in accordance with the following technical specifications: Make:- OTIS/KONE/SHINDLER/THOMSON/MITSUBISHI` Reference Quotation:- OTIS. `CAPACITY (kgs) 1020 Kg, 15 persons. SPEED (mps) 1.6 mps. RISE (m) 24 M. STOPS 6 Stops With (all opening on the same side). CONTROLLER TYPE ACD3-MRL. DRIVE VF Regenerative (Closed Loop). POWER SUPPLY 400/415 Volts (3 Phase AC). OPERATION Full collective operation. CAR GROUP One car (simplex) MACHINE PM Gearless (Located above shaft). TRACTION MEDIA Flat Coated. Steel Belt. CAR FINISH ``• Rear Mid Panel = Stainless Steel #4(Hairline). • Rear Corner Panels = Stainless Steel #4(Hairline). • Side Panels = Stainless Steel #4(Hairline). • Front Panels = Stainless Steel #4(Hairline). FALSE CEILING TYPE CD-41. FLASE CEILING FINISH Stainless Steel #4(Hairline). VENTILLATION Cross flow fan. HAND RAILS Stainless Steel Mirror Finish. Handrails on all car panels(sideLH,sideRHandRear). FLOORING Vinyl Tiles. CAR DOOR FINISH BOTH SIDE Stainless Steel #4(Hairline). LANDING DOORS FINISH Stainless Steel #4(Hairline). HOISTWAY DIMENSIONS AVAILABLE (W x D – mm) 1890 mm W x 2850 mm D. CAR DIMENSIONS (W x D x H - mm) 1100 mm W x 2000 mm D x 2200 mm D. CAR and HOISTWAY DOOR TYPE Central opening (CO) doors. DOOR OPENING (W x H - mm) 800 mm W x 2000 mm H. DOOR OPERATOR DC Door Operator. `

VC- `SITC of Main Auditorium loudspeaker Two-Way Line Array Column with Asymmetrical Vertical Coverage: Speci?cations: System: Components: Four 130 mm (5 in) LF drivers: Sixteen 25 mm (1 in) HF drivers: Frequency Range (-10 dB): 60 Hz – 20 kHz Coverage: Vertical (selectable via switch): Narrow Mode: 25° (2 kHz - 16 kHz) (±10°) Broad Mode: 45° (750 Hz - 16 kHz) (±10°): Horizontal 150° (500 Hz – 8 kHz, ±20°) Sensitivity (2.83V@ 1m) : Narrow: (speech mode) 98 dB (1 kHz - 8 kHz): (music mode) 93 dB (300 Hz - 18 kHz): Broad: (speech mode) 96 dB (1 kHz - 8 kHz): (music mode) 92 dB (300 Hz - 18 kHz) Nominal Impedance: 8 ohms: Power Capacity and Max SPL: : 500 W (2000 W peak), 2 hrs: 350 W (1400 W peak), 100 hrs: : Narrow: (speech mode) 125 dB cont ave (131 peak) : (music mode) 120 dB cont ave (126 peak): Broad: (speech mode) 123 dB cont ave (129 peak): (music mode) 119 dB cont ave (125 peak) Transducers: Low Frequency Drivers: 4 pcs, 130 mm (5 in) drivers, dual magnet neodymium, 38 mm (1.5 in) voice coil, damped blended textile surround, coated diaphragm for moisture, UV, and salt resistance, shielded. High Frequency Drivers: 16 pcs, 25 mm (1 in) drivers, dual magnet neodymium, encased magnet and coated diaphragm for moisture, UV and salt resistance, shielded. Enclosure: Fiberglass reinforced ABS cabinet, painted aluminum grille.`

VC- `SITC of Delay speakers for under balcony as per following Specifications SYSTEM TYPE: Powered 12” two-way: CABINET: Polypropylene with full steel grille: MAX SPL: 127 dB peak: FREQUENCY RESPONSE (±3 dB): 53 Hz – 20 kHz: POWER RATING: 1300 watts peak: INPUT IMPEDANCE: 10k ohm balanced: COVERAGE PATTERN: 90º (horizontal) x 60º (vertical) nominal: BLUETOOTH: Audio streaming, Bluetooth version 5.0: DSP: 4 presets, feedback suppression, ducking: I/O: 2 XLR/TRS combo mic/line inputs, 1 XLR pass-thru output.`

VC-`Amplifier: Specifications AC Line Voltage and Frequency Configurations Available ( plus /- 10%) 100VAC 50/60 Hz, 110VAC 60 Hz, 220 and 230~240VAC 50 Hz Voltage Gain 42: Sensitivity 1.4V (for full rated power at 4 ohms): Signal to Noise Ratio (ref. rated power, 8 ohms, 1 kHz) ) 103 dB THD (0.5%: Damping Factor (8 ohms, 10 Hz to 400 Hz) )200: Intermodulation Distortion (from full rated output to -30 dB) (0.3%: Frequency Response (at 1W, 20 Hz - 20 kHz) -1 dB Crosstalk )85 dB (below rated 8 ohms power, at 1 kHz): )55 dB (below rated 8 ohms power, at 20 kHz): Input Impedance (nominal) 20 kilohms balanced, 10 kilohms unbalanced Load Impedance 2~8 ohms per channel in Stereo: 4~8 ohms in Bridge. IEC Power Connector 15A`

VC-SITC of programmable gooseneck microphone with RED status ring of neck, cardiod polar pattern, integrated on/off switch, bass roll off filter complete with standard accessories as per tender specifications.

VC-SITC of Digital Wireless hand held microphone with cardioid polarity pattern, Cardioid dynamic capsule system

VC-SITC of Digital Wireless Headworn microphone with cardioid or better polarity pattern, Cardioid dynamic capsule system

Vc-Equipment rack 24U for Av equipments with castors, cooling fan, PDU, mounting hardware and selves as required.

VC-Connectors : XLR male female, stereo Connectors, one set as required.

VC-Microphone Cable: 2 core PVC insulated Cu conduction sheilded microphone cable cable.

VC-Speaker Cable: 2 core 2.5 sq mm PVC insulated Cu conduction loudspeaker cable.

VC-DSP 2 x 6 speaker management drive rack 260.

VC-Mixing console 10 channel

VC-Wired mike for vocal

VC-installation testing commissioning of system

VC-`SITC of 4K Laser projector with ultra wide resolution WUXGA (1920 x 1200) with infinite Contrast, 4k 30P input Support having 6000 Center Lumens. Make : Sony/ Epson/ Panasonic`

VC-SITC of Projector Mount Kit , Power Cable of Suitable required length with required accessories complete in all respects.

VC-SITC of Motorized Projection Screen 12` x 9` with high quality white matt projection screen fabric , operated with a wall mount switch

VC-Matrix switcher with 4 HDMI Input : 2 Stereo Audio Input with 1 Mic Input : 1 HDMI Output , 1 HD-BaseT Output and 1 Stereo Audio Output : Video Latency: Less than 2 frames : RS-232 , Ethernet .

VC-SITC of HDMI wall plate for connectivity on podium and stage.

VC-Supply and Laying of 1.8Metres HDMI patch cord in existing conduit.

VC-AOC cables - for 4k connectivity - 20 m

VC-Intractive Touch LED Display, 4K resolution, 86 inch, with built in android, PC, Storage, Networking , Audio, Video, USB Ports

VC -Wireless Lapel Microphone

VC-Dual Channel Wireless Handheld Microphone

VC-ceiling Speaker

VC-Amplifier

VC-Conference controller

VC-Digital Delegate unit with Microphone

VC-Chairman unit with Microphone

VC-Cablecubby with HDMI , LAN and Power socket

VC-Video Conferencing system

VC-USB, HDMI wires and any other accessories

VC-Equipment Rack 16U

VC-55 inch LED TV

VC-Switcher 8*8

VC-Control Processor

vc-WI-FI

VC-DSP

vc- Installation, comissioning and programming

VC- ceiling Speaker

VC-Amplifier .

VC-Conference controller.

VC-Chairman unit with Microphone.

VC-USB, HDMI wires and any other accessories.

VC-Matrix Switcher , AUDIO Dembedder.

VC-DSP.

VC-Installation, comissioning and programming.

VC-86` interactive panel

VCLR-Cablecubby with HDMI , LAN and Power socket

VCLR-HDMI Cable

VCLR-USB Cable

VCLR-Installation, comissioning and programming

250 KVA DG Supply, transporting, loading, unloading, erecting, testing and commissionig etc. of Silent Type Diesel Generating Set of 250 KVA, 3 phase and neutral, 50 c/s. 415 A.C. rating, comprising of following Diesel Engine, Alternator, Sound Attenuated Acoustic Enclosure, including necessary RCC foundation for errection including earth work as required and with other associated accessories: As per latest Norms for CPCB-IV plus rating Diesel Engine Diesel engine 4 stroke Water cooled, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50%RH and at 1000 Meter MSL and conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour included in 12 hours of continuous operation. The engine will be fitted complete with all the required accessories Engine mounted Instrument Panel fitted with and having digital display for following: Start-Stop switch with push button Water temperature indication Lubrication Oil pressure indication Battery charging indication RPM indication Over speed indication Engine Hours indication Digital electronic governor/digital voltage regulator Battery monitoring system and weak battery warning Digital metering for current, voltage, PF, KWH, KVA Alternator protection for under/over voltage, under/over frequency, reverse power, over current. Alternator: Alternator rated at 250 KVA, 415 volts at 1500 RPM, 3 phase 50 HZ, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH and at 100 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty self excited and self-regulated through AVR conforming to IS :4722/BS 2613 suitable for tropical condition and ambient temperature at 50 Degree C and as per manufacturer`s standard specifications with class-H insulation. Auto Start/Auto load management should be through controller type 3300 or approved equipment. with suitable Breaker Base Frame and Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary PCC block of 1:1.5:3 ratio of cement concrete of depth of 300 mm with suitable reinforcement which shall be installed on existing hard concrete floor and vibration isolation arrangement as per recommendation of manufacturer. Exhaust System: Dry exhaust manifold of suitable dia, welded blank MS pipe confirming to IS:3589 cut to required lengths (max. 3 mtrs) and installed with necessary bends, supports and clamps, anti-vibration mountings, insulation of exhaust system with 50mm thick mineral wool/Rockwool, wire mesh and aluminium cladding 0.8 mm thick etc. as required as per specifications with hospital exhaust silencer. Starting System: 24V DC Starting system comprising of starter motors: Voltage regulator and arrangement for initial excitation complete with suitable nos. of batteries (2 Nos. of 180 Amp. Hour capacity maintenance free ) as required as per specifications. Fuel Tank: Daily service fuel tank of 990 liters capacity fabricated out of 3 mm thick MS sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS Class C pipe of suitable dia complete with valves, level indication, flow switch with potential free contacts for giving signal to existing BMS system and accessories as required as per specifications. D.G Set Describe as above The item rate shall include the cost of diesel for 8 Hrs. Testing at project site.

LT PANEL Design, fabrication, assembly, wiring and supply of front operated dead front cubicle type compartmentalised as per Form 3B, rear access free standing, dust and vermin proof (IP 42 ingress protection) main switchboards suitable for use at 415 volts, 3 phase 4 wire 50 Hertz system suitable for a symmetrical fault level of 50 kA at 415 volts, fabricated from 2 mm thick CRCA MS sheets with hinged, gasketted (metal based neoprene) and lockable doors having structural reinforcement with suitable angle/channel/T/flat sections including 3 mm thick gland plates on top and bottom and including lifting hooks and including GI earth strip of required size with 2 nos earthing terminals and including powder coated paint finish of approved shade over metal surface cleaned and treated with seven tank process complete with interconnections etc as per specifications, as required and as below. (Note:The contractor may select the next higher fault rating of ACB/MCCB if it is not readily available ,without any extra cost ,as the figure indicated within the bracket are required maximum fault level of the panel). The rating of breakers may be changed at the time of detailed engineering as per project requirement without any extra cost implication to client). ALL LT PANEL, Panel’s shall be provided AS PER IEC-61439 Capacitor Panel’s shall be provided AS PER IEC-61921 With Gas Seprassion System MAIN LT Panel INCOMER FROM TRANSFORMER From 630 KVA Transformer - 1 1 No. 1000A 4 pole microprocessor based EDO, ACB (50kA) with integral protection as per PRMB-1 mentioned in Premable 1 set of 1000/5A, 15 VA, class-1 CTs for APFC relay 1 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. 1 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB 1 No. (0-1000A) Ammeter with ASS with 3 nos.1000/5A CT`s 1No. Digital multifunction meter class 1.0 accuracy, with RS 485 port output for IBMS integration with read (V,A,F,PF, kW, kVA, kVAR, kWh, kVAh, kVARh) etc 1Set- of ON/OFF/Trip/ Spring Charged and Trip circuit healthy indicating lamps. 240 V AC Motor wound spring closing mechanism 1 - 24 volts DC shunt trip coil 6 nos NO/NC contacts for remote opening and closing Terminals to receive XLPE insulated Aluminium cables Class – B transient voltage surge suppression devices suitable for 3 phases as per specification. INCOMER FROM 2 NOS DG and SOLAR 3 Nos. 400A 4 pole microprocessor , MCCB (50kA) with integral protection as per PRMB-1 mentioned in Premable with reverse power relay. 3 set of R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. 3 No. (0-500V) Voltmeter with Built-in VSS with 3 nos. 2A SP MCB 3 No. (0-400A) Ammeter with ASS with 3 nos. 400/5A CT`s 3 No. Digital multifunction meter class 1.0 accuracy, with RS 485 port output for IBMS integration with read (V,A,F,PF, kW, kVA, kVAR, kWh, kVAh, kVARh) etc Terminals to receive XLPE insulated Aluminium cables Class – B transient voltage surge suppression devices suitable for 3 phases as per specification. BUS BARS 1 Nos Electrolytic high conductivity CU three phase and neutral busbars with earthing rated at 1250 amps having a maximum current density of 0.8 amp per sq mm suitable to with stand symmetrical fault level of 50 kA at 415 volts. The neutral busbar is to be of 50% capacity. BUS COUPLER-1:- 2 No. 400A 4 pole microprocessor based MCCB (50kA) , with all required accessories. OUTGOINGS 4 Nos. 400A TPN MCCB (36 KA) as per PRMB-2 as mentioned in Preamble.with R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. and Multifunction meter with RS 485 port for IBMS integration and 3 nos.400/5A CT`s . 1 No. 250A TPN MCCB (36 KA) as per PRMB-2 as mentioned in Preamble.with R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. and Multifunction meter with RS 485 port for IBMS integration and 3 nos.250/5A CT`s . 3 Nos. 200A TPN MCCB (36 KA) as per PRMB-2 as mentioned in Preamble.with R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. and Multifunction meter with RS 485 port for IBMS integration and 3 nos.200/5A CT`s . 1 No. 160A TPN MCCB (36 KA) as per PRTM as mentioned in Preamble.with R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. and Multifunction meter with RS 485 port for IBMS integration and 3 nos.160/5A CT`s .(For Lift) 4 Nos. 125A TPN MCCB (36 KA) as per PRTM as mentioned in Preamble.with R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. and Multifunction meter with RS 485 port for IBMS integration and 3 nos.125/5A CT`s . 5 Nos. 100A TPN MCCB (36 KA) as per PRTM as mentioned in Preamble.with R,Y,B phase indicating lamps each with 3 nos. 2A SP MCBs. and Multifunction meter with RS 485 port for IBMS integration and 3 nos.100/5A CT`s . AUTO ON/OFF AND AUTO LOAD MANAGEMENT : `Hardware using PLCs for Monitoring of all Electrical Software and for operations, controlling and interlocking Parameters of 2 No. DG Panel and 1 Nos. Transformer with Window based software and Engineering and Software Development. Required Aux. Relays, Push Buttons and Indication lamps, 1KVA UPS for Black start and maintenance free Batteries, Power monitors, Programmable Logic controller, Annunciator and status Fascia, MIMIC with LED circuit etc as required completing the system.(As per SLD). ` The Switchboard with Logic control panel shall be complete with all interconnections, risers, internal wiring, labels, control/circuit fuses etc. complete as required. Note: Incomer from LT Supply, DG Panel and Bus coupler shall be electrically and mechanically interlocked. Main LT Panel as described above

HVAC PANEL (PTTA) Incomer 200A, TPN MCCB 25KA - 1No. 1 No. Digital 96 sq. mm voltmeter with selector switch and 2A control MCB 1 No. Digital CT operated 96 sq. mm Ammeter with selector switch 1 Set of 3 Nos. of phase indication lamps LED type with 2A control MCB BUSBARS 500A, TPN Aluminium busbars, including making necessary connections OUTGOINGS 63A, 4P MCB 10KA with 63A 4P ELCB- 8Nos. 63A, 4P MCB 10 KA- 2No. Comon area panel as described as per above specifications grouted, installed and tested complete as required. MAKE :Application control/Allied Engineer/ADVANCE.

VRV Cooling and heating mode type `Outdoor units shall have cooling and heating mode, consisting of one/multiple modules with digital vapour injection/inverter scroll technology based compressor and environment friendly refrigerant R-410A only. The unit should have COP as per ASHRAE 90.1 (Latest standard) . The C.O.P confirmation should be from the O.E.M letter, for the following capacities.The cost shall include the cost of Cabling from MCB/ELCB/isolator to the outdoor unit. (Cable Length to be as per drawing).Isolator cost shall also include.The unit shall be provided with its own microprocessor control panel with provision for integration with the building management system for Air-conditioning system.The units shall be suitable for 415V±10%,50 Hz. supply and complete with electrical controls and panels. Cost of Cowl with Birdscreen (If Required) for Top Discharge outdoor unit shall also include ,requirement of cowl to be verified by the HVAC Vendor as per drawing /site conditions andcost of MS stand for ODUs should also considered. External vibration pad shall also be provided during installation. Below Outdoor units are Top Discharge,However HVAC Vendor is suggeted to verify their performance. Anti-Corrosive treatment on the complete refrigerant piping and on the Outdoor units fins should be provided. `

VRV/VRF TYPE INDOOR UNITS : (To be supplied by same manufacturer of outdoor units) Recirculation type Supply,Installation,testing and commissioning of Ceiling hung type 4/1 way Cassette VRF AC units complete with controls prefilter, fan section, DX Coil section and all accessories with fittings as per specification as required. MAKE-LG/BLUESTAR/CARRIER/DAIKIN AREA CFM TR Four Way Cassette 1254 4.57

VRV/VRF TYPE INDOOR UNITS : (To be supplied by same manufacturer of outdoor units) Recirculation type Supply,Installation,testing and commissioning of Ceiling hung type 4/1 way Cassette VRF AC units complete with controls prefilter, fan section, DX Coil section and all accessories with fittings as per specification as required. MAKE-LG/BLUESTAR/CARRIER/DAIKIN CFM TR Four Way Cassette 1183 3.20

VRV/VRF TYPE INDOOR UNITS : (To be supplied by same manufacturer of outdoor units) Recirculation type Supply,Installation,testing and commissioning of Ceiling hung type 4/1 way Cassette VRF AC units complete with controls prefilter, fan section, DX Coil section and all accessories with fittings as per specification as required. MAKE-LG/BLUESTAR/CARRIER/DAIKIN Four Way Cassette CFM TR 812 1.60

Hi Wall Type: `Supply, installation, Testing and Commissioning of Hi Wall Type  Indoor units equipped with pre-filter, fan section with low noise fan, multispeed motor, coil section with DX coil, electronic expansion valve, outer cabinet, drain pan with drain pump kit, insulation, pipe connections etc. of various capacities including supporting arrangement with suitable vibration isolator as per specifications and drawings.The cost shall include the cost of power and control cabling and earthing from ODUs to Indoor Units as per drawing including plug top suitable for 15 A/3 pins socket. Indoor unit should have capability to provide cooling/heating as per seasonal weather changes.MAKE-LG/BLUESTAR/CARRIER/DAIKIN` Hi WallType CFM 388 TR 1.03

Supply, installation, testing and commissioning of Electronic Type Expansion Kit, Communication PCB with Sensors, Corded Self Diagnostic Type Digital Thermostat, Y-joints etc. as required MAKE-LG/BLUESTAR/CARRIER/DAIKIN.

SITC of fittings :Refnet/Y joints to connect the various indoor units to outdoor unit.

AXIAL FLOW FANS `Supply, Installation testing and commissioning of Vane Axial Fans with impeller having adjustable pitch angle blades and complete with suitable TEFC motor, Casing Shall be GSS/MS with powder coated and drive assembly. Single piece Long Casing (Motor should completely be accommodated inside the fan casing) Axial Fans shall be licensed to bear the AMCA Seal. Multi piece casing is not accepted. Guide Vanes shall be integral part of Fan casing it shall not be attached as an accessory. The fan shall be suitable for ceiling/floor installation along with spring isolators or as recomended by the manufacturer. Fan motor shall be VFD compatible and shall be of high efficiency Class EFF-1(Only for normal working fans). Motor shall be suitable for 415 ± 10% V, 3 Phase, 50 ± 3%Hz electrical supply.Fan and motor shall be selected for minimum 20mm Static pressure.Total static pressure shall be checked by vendor. Change in static pressure will not attract any price implication. The complete fan assembly alongwith the motor and drive assembly shall be fire rated i.e. should be tested and certified for 250 Deg C for 2 hour in accordance to standard `BSEN12101-3:2015 from TUV SUD PSB Singapore or equivalent internationally recognized fire laboratory and meet the duty parameters.The fan shall be selected for low noise level and low RPM as per technical specifications. Fans shall be AMCA Certified and Fan Efficiency Grade ( Min FEG 71, lesser is not acceptable).Thickness of the casing shall not be less than: For Dia (300 to 650) mm – 2mm, Dia (700 to 1140) mm – 3 mm, Dia (1200 to 1400) mm – 4mm and Dia 1600 – 5 mm. All fans after assembly shall be dynamically trim-balanced to ISO1940 and AMCA 204/3 - G2.5 quality grade. Sound level for normal and emergency application fans should not exceed 80 DB(A) @ 3 meter (Room Condition) .Incase of not achieving sound , attenutor has to be added. Outlet velocity of the fans should not exceed 13 m/s for normal application and 16 m/s for emergency application. Fan RPM shall not exceed 2850 upto 3500 CFM and 1450 above 3500 CFM. Price shall also include double sleeve fire retardant flexible connection on both sides of the fan. The fan duty shall be as follows: (Rootair,Humidim,Zeco)` FAN CFM MOTOR KW 12700 2.82

SUB-HEAD- II : VENTILATION SYSTEM AXIAL FLOW FANS `Supply, Installation testing and commissioning of Vane Axial Fans with impeller having adjustable pitch angle blades and complete with suitable TEFC motor, Casing Shall be GSS/MS with powder coated and drive assembly. Single piece Long Casing (Motor should completely be accommodated inside the fan casing) Axial Fans shall be licensed to bear the AMCA Seal. Multi piece casing is not accepted. Guide Vanes shall be integral part of Fan casing it shall not be attached as an accessory. The fan shall be suitable for ceiling/floor installation along with spring isolators or as recomended by the manufacturer. Fan motor shall be VFD compatible and shall be of high efficiency Class EFF-1(Only for normal working fans). Motor shall be suitable for 415 ± 10% V, 3 Phase, 50 ± 3%Hz electrical supply.Fan and motor shall be selected for minimum 20mm Static pressure.Total static pressure shall be checked by vendor. Change in static pressure will not attract any price implication. The complete fan assembly alongwith the motor and drive assembly shall be fire rated i.e. should be tested and certified for 250 Deg C for 2 hour in accordance to standard `BSEN12101-3:2015 from TUV SUD PSB Singapore or equivalent internationally recognized fire laboratory and meet the duty parameters.The fan shall be selected for low noise level and low RPM as per technical specifications. Fans shall be AMCA Certified and Fan Efficiency Grade ( Min FEG 71, lesser is not acceptable).Thickness of the casing shall not be less than: For Dia (300 to 650) mm – 2mm, Dia (700 to 1140) mm – 3 mm, Dia (1200 to 1400) mm – 4mm and Dia 1600 – 5 mm. All fans after assembly shall be dynamically trim-balanced to ISO1940 and AMCA 204/3 - G2.5 quality grade. Sound level for normal and emergency application fans should not exceed 80 DB(A) @ 3 meter (Room Condition) .Incase of not achieving sound , attenutor has to be added. Outlet velocity of the fans should not exceed 13 m/s for normal application and 16 m/s for emergency application. Fan RPM shall not exceed 2850 upto 3500 CFM and 1450 above 3500 CFM. Price shall also include double sleeve fire retardant flexible connection on both sides of the fan. The fan duty shall be as follows: (Rootair,Humidim,Zeco)` FAN CFM MOTOR KW 12500 2.81

HVAC-FRESH AIR INTAKE LOUVERS Supply, installation, testing and balancing of Fresh air Extruded Aluminium intake louvers with bird screen and opposed blade box type GI volume control damper complete as per specification and approved shop drawings.Construction/profile of the louvers shall give a protection against the rain and suitable for fixing in the external facade of the building. (Aalatech,ductofeb,Zeco).

HVAC-EXHAUST LOUVERS Supply, installation, testing and balancing of Exhaust air Extruded Aluminium intake louvers with bird screen complete as per specification and approved shop drawings.Construction/profile of the louvers shall give a protection against the rain and suitable for fixing in the external facade of the building. 10

SUB-HEAD-IIIB : AIR DISTRIBUTION WORK FOR AIR CONDITION Rectangular GI Ducting (Factory Made) Supply, fabrication, Installation, testing and commissioning of factory fabricated rectangular/round/elliptical ducts using G.I Sheets (120GSM coating). The price shall include factory fabricated TDF flanges, turning vanes, splitter dampers, supports (factory fabricated, full threaded GI rod/hangers and G.I slotted channel), sealant, neoprene gasket, access door etc. The joints shall be with least leak and shall be tested with pressure testing machine.(Aalatech,ductofeb,Zeco) 22 gauge galvanized sheet steel ( TDF 751 - 1500mm)

HVAC-SUB-HEAD-IV-THERMAL INSULATION Thermal Insulation(Internal ducting): Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class `O`) insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. PARAMOUNT/CANI 19mm thick

Supplying and laying of following 1100 volt grade XLPE insulated PVC sheathed Copper conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. The cost of cable shall include the cost of cable tray. 4 C x 16 sq.mm

HVAC-Supplying and laying of following 1100 volt grade XLPE insulated PVC sheathed Copper conductor armoured cables as per specification in existing trenches, cable trays, ducts, over bed of sand, clamped to wall with suitable clamps including, saddles fixing bolts, connecting testing and commissioning. The cost of cable shall include the cost of cable tray. 4 C x 10 sq.mm

HVAC-Cable end termination of the following XLPE insulated PVC sheathed Copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing.

HVAC-Cable end termination of the following XLPE insulated PVC sheathed Copper conductor armoured cables of 1100 volt grade including supplying and fixing of bimettalic crimping lugs, double compression glands with earthing. 4Cx 10 sq.mm

CCTV camera-```IP Varifocal Bullet camera: Supply, Installation, Testing and Commissioning of 5MP Image Sensor 1/2.8? Progressive Scan CMOS, Min. Illumination ````Color: 0.005Lux@F1.2 Color: 0.008Lux@F1.4, B/W: 0Lux with IR on````, WDR 120dB Super WDR, Shutter Time 1/100000s~1s, IR Distance ````Up to 50m(2.7~13.5mm), Day/Night Mode, Day/Night/Auto/Customize/Schedule, S/N )55dB, Lens Motorized 2.7~13.5mm, P-Iris(Optional), Field of View ````H89°~H30°/D111°~D37°/V66°~V22° (2.7~13.5mm), Mount F14, Focus Control Auto/Manual, Iris Control (Optional for I Series) Auto/Manual, Max. Image Resolution 2592x1944, Primary Stream: 30fps@(2592x1944), Secondary Stream: 30fps@(704x576), Tertiary Stream: 30fps@(1920x1080), Video Compression H.265 plus /H.265(HEVC)/H.264 plus /H.264/MJPEG, Video Bit Rate 16Kbps~16Mbps(CBR/VBR Adjustable), Privacy Masking Up to 28 areas(24 mask areas and 4 mosaic areas), ROI Up to 8 areas, , Audio Sampling Rate: 8/16/32/44.1/48KHz, Audio Bit Rate 16~256kbps, Two-way Audio Support, Video Analysis Region Entrance, Region Exiting, Advanced Motion Detection, Tamper Detection, Line Crossing, Loitering, Object Left, Object Removed, Face Detection Detect and capture faces, get real-time snapshots, People Counting and Report, Count the number of people entering or exiting, up to 4 detection areas or regional people counting, Storage MicroSD/SDHC/SDXC Card Local Storage, up to 256G, Advanced Function Heat Map, BLC, HLC, 2D DNR, 3D DNR, Defog, AWB, EIS, IP Address Filtering, AGC, Anti-flicker, Corridor Mode, Deblur, Watermark, SIP/VoIP Support Yes, Voice and Video-over-IP, Event Trigger Motion Detection, Network Disconnection, External Input, Audio Alarm, etc. Event Action FTP Upload, SMTP Upload, SD Card Record, External Output, SIP Phone, HTTP Notification, etc. System Compatibility ONVIF Profile G and Q and S and T, API, Working Temperature -40?~60?, Working Humidity 0~90%(Non-condensing), Power Supply PoE (802.3af) / DC 12V±10%, Power Consumption 9W MAX and 13W MAX(With IR on), Housing Up to IP67-rated for Weather-resistant Performance, Certificate: BIS, FCC, CE.``Make TYCO/AXIS/BOSCH/ GVD`

CCTV-```IP Varifocal Dome camera: Supply, Installation, Testing and Commissioning of 5MP Image Sensor 1/2.8? Progressive Scan CMOS, Min. Illumination ````Color: 0.005Lux@F1.2 Color: 0.008Lux@F1.4 and B/W: 0Lux with IR on````, WDR 120dB Super WDR, Shutter Time 1/100000s~1s, IR Distance ````Up to 50m(2.7~13.5mm), Day/Night Mode Day/Night/Auto/Customize/Schedule, S/N )55dB, Lens ````Motorized 2.7~13.5mm, P-Iris(Optional)```` Field of View ````H100°~H32°/D125°~D40°, Mount F14, Focus Control Auto/Manual, Iris Control Auto/Manual (Optional for I Series), Max. Image Resolution 2592x1944, Primary Stream 30fps@(2592x1944) Secondary Stream: 30fps@(704x576) Tertiary Stream:30fps@(1920x1080), Video Compression H.265 plus /H.265(HEVC)/H.264 plus /H.264/MJPEG, Video Bit Rate 16Kbps~16Mbps(CBR/VBR Adjustable), Privacy Masking Up to 28 areas(24 mask areas and 4 mosaic areas), ROI Up to 8 areas, Image Setting Brightness/Contrast/Saturation/Sharpness, Ethernet 1*RJ45 10M/100M Ethernet Port, Audio I/O Built-in, Microphone and 1 Audio Output Interface, Alarm I/O 1 - 1, Network Storage NAS(Support NFS, SMB/CIFS), ANR, Protocol IPv4/IPv6, ARP, TCP, UDP, RTCP, RTP, RTSP, RTMP, HTTP, HTTPS, DNS, DDNS, DHCP, FTP, NTP, SMTP, SNMP, UPnP, Bonjour, SIP, PPPoE, VLAN, 802.1x, QoS, IGMP, ICMP, SSL, Audio Compression G.711/AAC/G.722/G.726, Two-way Audio Support, Video Analysis Region Entrance, Region Exiting, Advanced Motion Detection, Tamper Detection, Line Crossing, Loitering, Object Left, Object Removed, People Counting and Report Count the number of people entering or exiting, up to 4 detection areas or regional people counting, Support MicroSD/SDHC/SDXC Card Local Storage, up to 256G, Advanced Function Heat Map, BLC, HLC, 2D DNR, 3D DNR, Defog, AWB, EIS, IP Address Filtering, AGC, Anti-flicker, Corridor Mode, Deblur, Watermark SIP/VoIP Support Yes, Voice and Video-over-IP, Event Trigger Motion Detection, Network Disconnection, Audio Alarm, External Input, etc. Event Action FTP Upload, SMTP Upload, SD Card Record, External Output, SIP Phone, HTTP Notification, etc., System Compatibility ONVIF Profile G and Q and S and T, API, Working Temperature -40?~60?, Working Humidity 0~90%(Non-condensing), Power Supply PoE (802.3af) / DC 12V±10%, Power Consumption 8W MAX and 10W MAX (With IR on), Housing Vandal-proof IK10-rated Metal Housing / Up to IP67-rated for Weather-resistant Performance, Certificate: FCC, BIS, CE.``Make TYCO/AXIS/BOSCH/ GVD

CCTV-```Supply, Installation, Testing and Commissioning of 64 Channel Windows NVR, 16 SATA interface, Up to 64 channel Video Inputs, NVR shall have a throughput of minimum 500Mbps or better, Recording rate at up to 384Mbps, HDMI Video output up to 4K. Supports live view, storage, and playback at 1.3-20 MP resolution, Shall be capable of live streaming of 64 cameras, Shall support direct attached storage (DAS) and iSCSI, storage expended by 400TB, Shall support two-way audio, G. 711, G.726, and AAC, Shall pre-install anti-virus software to protect system security, simultaneously record multiple streams in any combination of JPEG, MPEG-4, H.264, H.265, and MxPEG with AES-128 encryption, support 0.25, 0.5, 1, 2, 4, 8, 16, and 32 times forward/backward playback, pause, jump to next/previous frame, go to date, speed controls, go to later/ago (0.5/1/5 minutes), support the display of VCA metadata on video live-view and playback, CE, FCC, EN, BIS approved including all accessories and components for functioning completely as required and up to the satisfaction of engineer in charge. Minimum Hardware Requirements: Make TYCO/AXIS/BOSCH/ GVD`

CCTV-`Supply Installation Testing and Commissioning of Layer -2 24 Port Gigabit PoE 10/100/1000Mbps Switch. port1-port 8 can support 250m supply power. PoE Power Budget 250W. LED light 26 Link/Act Indicator light, 16 PoE indicator light, 1 Power indicator light. PoE Standard IEEE 802.3i IEEE 802.3u IEEE 802.3x IEEE 802.3ab IEEE 802.3af IEEE 802.3at. Prioritize the identified video data to make video transmission smoother. Automatic detection power of port, power off and restart the device. Make Cisco/zyxel Cisco/Ericsson.`

CCTV-Supply Installation Testing and Commissioning of 6U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make: Comrack/HCL/Valrack.

CCTV-Supply Installation Testing and Commissioning of 12U Equipment Rack . Make: Comrack/HCL/Valrack.

CCTV-Supply Installation Testing and Commissioning of 43` LED Monitor, HDMI Port.Resolution,1920 x 1080 (FHD),Backlight Type-LED(Edge),Viewing Angle Degree-178x178,Life span (hrs)-30,000,Brightness (cd/m2)-200,or better, Make: Sony/Panasonic/Samsung

CCTV-Supply Installation Testing and Commissioning of 2 KVA UPS Cum Inverter with 1 hr back up: MAKE BPE/ NUMERIC/ Emerson.

IBMS-Application Software Supply, installation, testing and commissioning of the following window based graphical software for IBMS system with 1 No. Client for Operator workstation. The Software shall have 3D and HD vector dynamic graphics with Autocad import of plan with Zoom In and Zoom Out facility, Native 64 Bit System, Multi-Monitor Support-( Max 4 Nos), Multi-language support, BTL, UL, EN Certified System, BACnet Profile B-AWS (Advanced workstation) as per the BTL Listing, dot net platform, Certified OPC DA Server by OPC Foundation, Web-Based Server software shall permit use of Standard Web-Browsers such as Microsoft Internet Explorer, Netscape Navigator, etc. The Software shall comply to international standards and strive to deliver products that meet security standards such as ISA/IEC 62443, UL2900, ISO/IEC 27001, ISO/IEC62443 and OWASP. Cybersecurity audit trail, 4-eye principle, Seamless integration of certificates within customer IT infrastructure, Microsoft’s active directory-based authentication, Use of network infrastructure that supports physical network or VLAN segmentation, Placing the web server in a “demilitarized zone” (DMZ), End-to-end encryption, from client to server, End-to-end encryption between servers, Certificate-based data exchange, Encrypted backups. The Software shall be considered for 5000 IO Points and 2 Client License (Honeywell/ Siemens/PANASONIC/INFERRIX/ ALC)

IBMS-6.6-CO Sensor

HVAC-SUPPLY/ RETURN AIR DIFFUSERS Supply, installation, testing and balancing of square, rectangular and round extruded aluminium powder coated Supply/ Return Air diffusers. Diffuser shall be with spring loaded removable core type distribution grid , key operated aluminium black matt finish dampers .Diffusers shall be supplied in accordance with specifications and approved shop drawings.(Aalatech,ductofeb,Zeco)...

HVAC-RETURN AIR / EXHAUST AIR DIFFUSERS Supply,installation,testing and balancing of square, rectangular and round extruded aluminium powder coated Return Air Diffusers/ Exhaust Air Diffusers. Diffuser shall be with spring loaded removable core type distribution grid and shall be without dampers.Diffusers shall be supplied in accordance with specifications and approved shop drawings.(Aalatech,ductofeb,Zeco)....

LIft-Supply Installation testing and commissioning of Passenger (1020 Kg, 15 persons.) Machine Room Less Gearless Elevator with 3 year free comprehensivie warranty period to be supplied and installed in accordance with the following technical specifications: Make:- OTIS/KONE/SHINDLER/THOMSON/MITSUBISHI `CAPACITY (kgs) 1020 Kg, 15 persons. SPEED (mps) 1.6 mps. RISE (m) 24 M. STOPS 6 Stops With (all opening on the same side). CONTROLLER TYPE ACD3-MRL. DRIVE VF Regenerative (Closed Loop). POWER SUPPLY 400/415 Volts (3 Phase AC). OPERATION Full collective operation. CAR GROUP One car (simplex) MACHINE PM Gearless (Located above shaft). TRACTION MEDIA Flat Coated. Steel Belt. CAR FINISH ``• Rear Mid Panel = Stainless Steel #4(Hairline). • Rear Corner Panels = Stainless Steel #4(Hairline). • Side Panels = Stainless Steel #4(Hairline). • Front Panels = Stainless Steel #4(Hairline). FALSE CEILING TYPE CD-41. FLASE CEILING FINISH Stainless Steel #4(Hairline). VENTILLATION Cross flow fan. HAND RAILS Stainless Steel Mirror Finish. Handrails on all car panels(sideLH,sideRHandRear). FLOORING Vinyl Tiles. CAR DOOR FINISH BOTH SIDE with Glass . LANDING DOORS FINISH Stainless Steel #4(Hairline). HOISTWAY DIMENSIONS AVAILABLE (W x D – mm) 1890 mm W x 2850 mm D. CAR DIMENSIONS (W x D x H - mm) 1100 mm W x 2000 mm D x 2200 mm D. CAR and HOISTWAY DOOR TYPE Central opening (CO) doors. DOOR OPENING (W x H - mm) 800 mm W x 2000 mm H. DOOR OPERATOR DC Door Operator. Note: lift with front and back glass doors can be front side functional`