Northern Railway Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 5,76,300Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Signalling Work In C/w Ttr(tws)-113sets, Ttr(wcmsc)-51sets, Ttr(fs+tws+wcmsc)-9 Sets And Ttr(tws+cmsc)-4 Sets In Sir-dlpc, Rpj-bti, Ldh-dui, Dui-jhl And Jhl-hsr Section Over Ambala Division
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
OT-19-2024-25-AMBALA DIVISION-S AND T/NORTHERN RLYTender No
OT-19-2024-25Tender Authority
Northern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of Cable Fault locator as per specification attached as Annexure-A. Make: Tempo/Stanlay, Model Sidekick plus Kit Standard (1155-5001) or equivalent or better. Inspection: By RITES.
3
643932
1931798.25
... More
Supply of single app. Case steel RE with 'E' type lock and key ward no. 42 and handle as per Drg. No. sketch no. RE/SnT/ALD/SK/219/82 and 221/82 with Alt. A and 221/82 with Alt. B. Inspection: By Consignee.
20
23188
463769.8
... More
Supply of apparatus Case steel RE half with 'E' type locks and key ward no. 42 and handle as per Drg. No. sketch no. RE/SnT/ALD/SK/220/82 and 221/82 with Alt. A and 221/82 with Alt. B. Inspection: By Consignee.
10
15004
150048.8
... More
Supply and testing of digital earth resistance tester model no. MOTWANE DET20, .1/01ohm resolution range 0-20 ohms or similar. Inspection: By Consignee.
20
5640
112818.2
... More
Supply of Components for Clamp Type Ground Connection for Point Machine 220mm Stroke. Consists of :- 1.Clamp Point Lock 60kg (TWS) for B.G to Drg.No. RDSO/S3395A- Alt-1: 1 Set. 2.Drive rod to Drg.No. RDSO.S.3460 Alt- PTJ-1: 1 No 3. Drive rod lug to Drg.No RDSO.S.3461 Alt- PTJ-4: 08 1 No 4. Drop lug to Drg.No RDSO.S.3598 Alt-1:4 Nos 5.Switch Extension Bracket to Drg.No RDSO.S.3591, Alt-PTJ-1: 2Nos 6.Bush to Drg.No RDSO.S.3463: 1 No 7.Insulating Plate (RH) to Drg.No RDSO.S.3592: 1 No 8.Insulating Plate (LH) to Drg.No RDSO.S.3593: 1 No 9.Insulating Bush for Detector rod drop lug to Drg.No CWM 02120: 2 Nos 10. Insulating Bush for Lock rod drop lug to Drg.No CWM 02220 :2 Nos 11. Insulating Washer to Drg.No S.8640 :8 Nos 12.Pin complete to Drg No. CWM 02320 :1 No.Inspection by RITES
40
36986
1479468.4
... More
Supply of Electric track drilling machine equipment consisting of Heavy duty electric 09 track drilling machine works on 110V 50 Hz AC with suitable interchangeable track mounting stand with depth adjusting facility. Make of heavy duty electric drilling machine is of Rallies or Wolf or Bosch or similar or better. Inspection: By Consignee.
15
20028
300430.95
... More
Supply of drill Bit size 7.14mm HSS parallel shank twist drill (Jobber series) Make- Addison similar or better. Inspection: By RITES
10000
201
2015100
... More
Supply of Track drilling machine manual operated for drilling holes in Rail for bond wire size 7SWG. Inspection: By Consignee.
30
4311
129359.1
... More
Supply of SPD Life tester, designed for on-site testing of surge protective device (SPD). 12 It allows checking and indicating the health status of GDT/MOV based SPD of voltage range up to 1000V. It shall indicate the status of SPD by measuring its electrical parameter. Make- JMV or reputed make. Inspection: By Consignee.
3
153515
460546.14
... More
Supply of Limit switch, Timing belt and Push button as spares for ELB as mentioned.- 13 (a) Limit switch 2 No 2 NC=50Nos. (b) Limit switch 1No 1NC=50Nos. (c) Limit Switch (1 Lever Type, 2 Top Roller 14 type)=50Nos. (d) Timing belt big for pedestal=50 Nos. (e) Timing Belt for locking (L98)=50 Nos. (f) Push Button Complete with Element = 20Nos. Inspection: By RITES
2
309695
619391.64
... More
Supply of Motrized locking ,Motor and Motor contactor as spares for ELB as mentioned.- 14 (a) Motorized Locking Complete 110 V AC with Limit switch =04 Pair (b) Motor 110 VAC 0.5 HP for pedestal =08 Nos. (c) Motor 110 VAC 0.25 HP for locking=08 Nos. (d) Motor Contactor 110 V AC (9 Amp) =20 Nos. (e) Motor Contactor 110 V AC (18 Amp) =20 Nos Inspection: By RITES
2
498398
996796.32
... More
Supply of Spare electrical operated lifting barrier GI booms as per latest RDSO drg S- 11600 in maximum 4 sections of 8 feet each. Inspection: By RITES.
30
37506
1125208.2
... More
Supply of Web Detector Set for Medha make Single section digital Axle counter, Web 16 Detector Set One Set consists of Tx coll 31KHz/36KHz assembly-01 No. and Rx coil 31KHz/36KHz assembly-01 No. as per RDSO specification RDSO/SPN/177/2012 (VER. 3) or latest. Inspection: By RDSO.
10
66311
663112.7
... More
Supply of multi lamp route indicator for [LED double Digit] from 0 to 19 white LED with housing as per specification (a) Two Digit LED Route Indicator capable of Displaying 1 to 19 Route. (b) Visibility of 300 Mtrs in Clear Day Light . (c) Option for white Colors, Chromaticity as per BS-13376 17 standard (d) Built with Robust AllnGan LED with junction temperature ( Grater than 100 degree Celsius) (e) Lamp Proving compatible with normal Bulb type multi lamp type route indicator housing (f) input operating voltage 110V AC+25 % (g) Uniform intensity over entire operating range (h) operating Temperature - 10 degree Celsius to 60+ degree Celsius. Firm's accepted Make/Brand: EFFTRONICS or similar or better. Inspection: By consignee.
4
66772
267089.52
... More
Supply of LED based stencil type route indicator (3Way) White LED With housing as per specification. (a) Operating I/P-110 V AC+-20%(88 V TO 132V). (b) Character power rating 18 approximately 5W per character (c) Visibelity in clear day sunlight -300 Mtrs. (d) Colour of the display Lunar white (X=0.310,Y=0.320) (e) Display type Alphabet (A/E/W=2, A/E/C=10, E/C/W=5). (f) Mechanical housing division 3way 550X565X311MM. Ordered Make: Efftronics or similar or better. Inspection: By RITES.
17
67909
1154457.93
... More
Supply of Digital AC/DC low current Clamp meter model KOICO 3540 or similar or better. Inspection: By RITES.
150
19035
2855320.5
... More
Supply of Multi meter fluke 179 TRUE RMS Multimeter or Similar or better suitable for 20 measuring various parameter. Inspection: By RITES.
40
24052
962116.4
... More
Supply of Relay, AC Immune, Plug-in type, Style 'QBAT', DC biased track, 9 ohm, 2F/2B 21 contacts, front and back contacts metal to carbon complete with plug board, retaining clip and connectors conforming to RDSO/SPN/84, Ver 2.0 Along with IRS:S-23, S-34 , IRS:S-60 (as applicable). The interlocking code for this unit shall be ABEJX. Inspection: By RDSO.
25
6646
166163.75
... More
Supply of Relay AC immune, plug in type, style QBCA1, based point contactor, 24 V DC 22 2HF/4B contacts, front contact heavy duty and back contacts metal to carbon, complete with plug board retaining clip and connectors confirming to BRS:943A, IRS:S-34 and IRS:S-23 as applicable or latest. The interlocking code for this unit shall be BCEJK. Inspection: By RDSO.
30
5934
178038.3
... More
Supply of Relay AC immune, plug in type, style QNN1. Twin DC neutral line relay 24V 23 DC, 4F/4B contacts each for LH and RH, front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS:960,IRS:S-34 , IRS:S-23 (as applicable). The interlocking code for this unit shall be ACEHJ or latest. Inspection: By RDSO.
25
4413
110330
... More
Supply of Relay AC immune, plug in type, style QNN1. Twin DC neutral line relay 24V 24 DC, 6F/2B contacts each for LH and RH, front and back contacts metal to carbon with plug board retaining clip and connectors confirming to BRS:960,IRS:S-34 , IRS:S-23 (as applicable). The interlocking code for this unit shall be ACDEK or latest. Inspection: By RDSO.
25
4318
107970
... More
Relay QL1 (11F/4B): Relay plug in type style QL1 magnetically latched neutral line 24V 25 DC 11F/4B contact, front and back contact metal to carbon, complete with plug board, retaining clips and connectors conforming to BRS: 935A, IRS:S34, IRS:S-23 as applicable, The Inter locking code for this unit shall be ABDEG. Inspection: By RDSO.
15
4973
74599.65
... More
Supply of Electronic Timer relay, 24 V DC- 60/120 sec) as per RDSO Spec. IRS:S 61/2000 (Amend. No. 3) or latest. Inspection: by RDSO.
20
3437
68743
... More
Supply of point contractor unit, NON AC immunized plug in type to operate on 24 VDC and capable of controlling Electric point machine operating on 110 V DC. The unit shall consist of (i) 27 N/R Relay(Neutral Relay with two coils), (ii) XR relay (24 V DC Neutral relay), (iii) W(N)R /W(R)R- mechanically Interlocked Relay, (iV) WCR( Heavy Duty Contractor Relay with breaking capacity 16 Amp.) RSSK 21/0001-B. All the above relays shall be mounted on Prewired base plate. Inspection: By RDSO.
30
25346
760402.5
... More
Supply of Key Lock Checking Relay (KLCR) working on 24V DC, AC Immunized with 28 different ward combinations and contact configuration 4F/4B with 2 extra ward plates and with case, RDSO spec no. RDSO/SPN/219/2016 ver 1.0 or latest, confirming to IRS S-23, S-34 and IRS S:46. Inspection by: RDSO.
15
7949
119248.5
... More
Supply of VRLA secondary battery 48 V/200 AH with all accessories with two nos.Manual of instructions with each set as per RDSO Specification no. S-93-96, Amendment 1, or latest. Inspection: By RDSO.
15
81896
1228445.85
... More
Supply of track feed battery charger 110VAC/2-4-6VDC / 10 Amps as per RDSO spec. no. IRS: 89/2013 (Amd 1) or latest from RDSO appd. Firm. Inspection: By RDSO.
40
4894
195760.8
... More
Supply of FRP type TLJB as per drg. No. SA-20101/M made of FRP material (FRP material conforming to RDSO/SPN/151/97 or latest) complete with 450 mm long 25 mm dia pipe. Inspection: By Consignee.
250
1272
318110
... More
SK 30H double rail contact with 8 meter cable for Eldyne make Multi/Single section 32 Digital axle counter as per RDSO specification no.RDSO/SPN/176/2013 ver.3 or latest and manufacturer specification. Make Eldyne electro systems Pvt .Ltd. (One no.packet contains the 02 no.TX and 02 nos RX Coils for rail connection sufficient for 1 DP including all accessories) MAKE THALES/ELDYNE. Inspection: By RDSO.
10
212006
2120066.7
... More
Supply of Insulation for 'L' type bracket for point fitting IRS type complete consisting of Insulation plate - 01 No. Ferrule - 02 Nos. Washers - 04Nos. (Material Nylon 66). Inspection: By Consignee.
500
428
214165
... More
Supply of Insulation for 'P' bracket for point fitting IRS type complete consisting of Insulation plate - 01No. Ferrule - 02 Nos. Washers - 04Nos. (Material Nylon 66). I Inspection: By Consignee.
500
1092
546245
... More
Supply of William stretcher bar insulation set suitable for ground connection RDSO Drg No.-T-1.367, T-10368, T-10384 to IRS-23 and S-40 with latest ammendment. The material should be procured from RDSO approved firm. Inspection: By Consignee.
500
407
203665
... More
Supply of channel pins single groove, galvanized, 7mm suitable for 4 mm dia bonding wire as per specification no. IRS S 17 69/M or latest contractor should get the approval of sample from Railway Engineer before supply. Inspection: By Consignee.
50000
3
194500
... More
Supply of DC Track circuit bond:-length 5 meter in stainless steel (Non Magnetic) Multi 37 stand wire 10 sq mm 2 layer insulation with SS ( Non Magnetic) web pin for fit designing and other side SS (Non Magnetic) Lug. Contractor should get approved of sample from Railway Engineer. Inspection: By RITES
500
3393
1696980
... More
Supply of DC Track circuit bond:-length 3.5 meter in stainless steel (Non Magnetic) 38 Multi stand wire 10 sq mm 2 layer insulation with SS ( Non Magnetic) web pin for fit designing and other side SS (Non Magnetic) Lug. Contractor should get approved of sample from Railway Engineer. Inspection: By RITES
500
2222
1111420
... More
Supply of GI wire 8 SWG (4mm dia) suitable for track circuit rail bonding. Inspection: By Consignee.
500
97
48670
... More
Supply of Infra-Red Thermal Imaging System as per attached RDSO specification no 40 TI/Spec/ohe/tips/1031(12/2013 or latest).Make FLIR,FLUKE,SONEL,KRYKARD S-240 or similar or better. Note Geo Tagging or Voice/Text annotation, inter alia are suitable as site recognition requirement. Inspection: By RITES.
5
171218
856092.95
... More
Supply of Web detector TX coil 21/25 KHZ-15 meters cable length for GG Tronics make HASSDAC as per RDSO specification No.- RDSO/SPN/17/2012 Version3 or latest. Make GG. Tronics. Inspection: By RDSO.
30
42845
1285350.3
... More
Supply Web detector RX coil 21/25 KHZ of HASSDAC compatible with existing web detector RX coil-model no:G36R, RDSO/SPN/17/2012 Version3, Make GG. Tronics or similar (Compatible with existing equipment). Inspection: By RDSO.
30
43630
1308903.3
... More
Web Detector (each set consists of 2 Nos. of TX and 2 Nos. of RX) for CEL make 43 HASSDAC Systems as per RDSO Specn.No.RDSO/SPN/177/2012 ver. 3 or latest. (Phase Reversal Type) Firm-s offered Make/ Model: Central Electronics Limited; Firm's offered item: Web Detector (each set consists of 2 No.s of TX and 02 No.s of RX) for CEL make HASSDAC Systems as per RDSO Specn No.RDSO/SPN/177/2012 Ver.3 or latest (Phase reversal type) Inspection: By RDSO.
30
52541
1576244.1
... More
Supply of 12V /120 AH Sealed Maintenance Free Battery as per JIS8702C or IS certifications of SMF / VRLA Battery, with at least 2 years Warranty from date of supply. Make- Exide, Okaya, HBL, Amaron, Quanta, Su-Kam and Luminious Only. Inspection: By RDSO
50
11232
561600
... More
Supply of Class "B" and "C" Surge protection device (SPD) type I and II with visual indication and potential free contact to remote monitoring as per RDSP spec no. RDSO/SPN/165/2012 45 version 3.0 or latest and IEC standard 61643 for signals line 230VAC application with handling lightning surges of 8/20 microseconds. One set consists of 3 nos. of SPD (Two nos. of B Class (L-N,L-E) and one ho. of C class (L-N) all enclosed in a box with KEMA or VDE certified as per latest IEC 61643- 11-2011 standard class B and C surge protection device required with three modules only. Make- OBO/Phonix/BETTERMAN/DEHN. Inspection: By RDSO
30
8024
240720
... More
Supply of Surge voltage Protection mounted on DIN Rail for HASSDAC as per RDSO specification No.-RDSO/SPN/177/2012 (Ver. 3) or latest. Inspection: By RDSO
60
26550
1593000
... More
Supply of A Marker LED Signal 110V AC Retrofittable in existing CLS housing. Specification: Letter Description: Alphabet "A", Letter Size: Approx: 91mm x 76mm, Visibility Distance: 100 metres, Colour: Yellow or Lunar White, Lamp Proving: AC LED ECR, Housing: Hermitically sealed unit in ABS material similar to Calling ON LED Signal dimensions, Input Operating Voltage: 110V +/- 20% AC, Input Operating Current: 150mA+10%-20%rms, Operating Temperature: -10degrees C to +70degrees C. Display: A. Inspection: By Consignee.
-
-
47
... More
Supply of calling-on colour light signal unit with offset bracket 3.5" dia. Type as per drg.no.SA 24351-52(Adv) or latest and spec.no.IRS-S-23/88. or latest. Inspection: By Consignee.
25
5599
139990.25
... More
Supply of GSM-4G Fixed wireless phones (FWP), VOLTE enabled, called ID, with conference facility, Hands free, high performance detachable TNC antenna, 2way-digital speaker, 8 49 speed dial keys, Call history, Phone book for 500 contacts, in built rechargeable battery with adapter, WIFI, Hotspot, suitable to work with JIO 4G-Volte SIM. Make: Beetel 5F 4G/ WIBRIDGE-4G-102/ MATRIX- SIMADO or equivalent standard make. Note: One sample to be got approved by consignee before bulk supply. Inspection: By Consignee.
20
5336
106732.2
... More
Supply of Obstruction test piece 3mm/5mm as per sample approved by Engineer in charge. Inspection by : Consignee.
200
2523
504686
... More
Supply of Reflective Tape Yellow Highlighter grade retro reflective tape conform to IS 14221 latest, BIS marked, Grade 2, Pressure type bonding for (Grade 1) R1-P. Inspection: By Consignee.
300
55
16779
... More
Supply of Tool Kit (ETU001) for High frequency Digital Axle Counter Multi section Service test panel including meter for test of track equipment, tools for mounting and adjustment of 52 track equipment and standard jig for drilling holes in rail. It should be as per Principal manufacturers (OEM: Thales/Eldyne) recommended list adequate for installation, day to day maintenance, and adjustment of indoor and outdoor gears, this shall also include kit for making and drilling of holes on rails. Inspection by: Consignee.
1
88264
88264.5
... More
Supply of Portable operator console for onsite programming of Axle Counters as per technical requirement given in tender document as Annexure-B. Inspection: By Consignee
1
70983
70983.06
... More
Supply and testing of Electrically operated lifting barrier set as per RDSO specification RDSO/SPN/208/2012 Version 2.0 or latest each consisting of 2 nos of lifting barrier pedestals each with 8 bend/contacts circuit controller with limit switches of approved make, hand crank, 2 electric motors 110 V AC, 2 GI boom of 32 ft long in octagonal shape with tapering cross section and telescopic 54 jointing arrangement as per RDSO drawing no. RDSO/S 11600, with 2 STOP baords Boom light boxes, M.S. counterweight and 2 nos. of boom support with boom motorised locking but without fringes to operate 2 barriers of one set. Control panel to have necessary switches/ buttons this also include supply of dual tone 110V AC 50Hz operated electronics warning bell with flasher arrangement and two 15 watt horns with suitable amplifier. This include the operating console with additional button if required. Inspection: By RDSO. (Note:- Solid state electronic flasher, dual tone warning bell, horn and amplifier are inspected by consignee).
2
446073
892146.36
... More
Supply of Stationary Valve regulated Lead Acid (VRLA) batteries 12 Volt 26 AH. Make: OKAYA or ENTREX or AMRON or similar or better. Inspection: By RDSO
96
2704
259632
... More
Supply of Stop Board as per RDSO Drg No 7235/B / Block Section Limit Board/Shunting Limit Board as per RDSO Drg. No. SA2375 (Adv.) . This includes Painting and retro reflective arrangement should be as per SEM. Inspection: By Consignee.
40
1724
68988
... More
Supply of Different warning Boards / Calling on Board used for Railway Signalling system as per RDSO Drg. No. SA2380 (Adv). This includes Painting and retro reflective arrangement should be as per SEM. Inspection: By Consignee.
40
3730
149218.4
... More
Supply of Office Revolving Chair Godrej Make Model No.9u02r Bravo Or Similar of reputed brand. Inspection: By Consignee.
15
8368
125521.65
... More
Supply of GLUED JOINT SEALANT AS PER BELOW SPECIFICATION: 1. Excellent ageing and weathering resistance 2. Excellent UV resistance . 3. High Temperature resistance up to 300 Degree centigrade or better 4. Non flammable , Non toxic . 5. Dielectric Constant at the rate 1 MHz to be 2.0 TO 3.5 . 6. Each CAN must have at least 250 ml paste. 7. Tensile Strength at the rate of 1.30 N/mm2 or better 8. Hardness at the rate of 54 shore A or better 9. Elongation at the rate of 200% .approx or better 10. Density at the rate of 1.5 gm/cm2 or better 11. Thermal conductivity at the rate of 0.30 w/Mk or better. Inspection by Consignee.
95
4088
388426.5
... More
Supply of Signal post Telephone consists of 1 master telephone + 1 slave (Simplex) - SPT/99 for use in intermediate block signalling system. Make Indisco/Epsilon/Tummala. Inspection: By Consignee.
8
6251
50014.32
... More
Supply of Steel Plain Almirah with 4 adjustable slaves Size: 1980mm height, 915 mm width and 485 mm depth. Make: Godrej Storewel Plain Large or Similar of reputed brand. Inspection: By Consignee.
5
16236
81181.75
... More
Power Supply Combination card (Card No.768) for HASSDAC as per RDSO Specification No. RDSO/SPN/177/2012 with version 3 or latest. Make: CEL. Inspection: By RDSO
20
6490
129800
... More
Supply of Vital Relay Box Model VR-722 Duely wired with following relays: (1) Vital 63 Relay QN1K,24V, 6F-6B =2Nos.(2) Reset Relay QN1K, 24V, 6F-6B =1No. (3) PR Relay QNN1,24V 6F2B (Duel)= 01 No. Suitable for CEL Make HASSDAC as per RDSO Specn. RDSO/SPN/177/2012 VER-3 or latest. Inspection: By RDSO.
10
41064
410640
... More
Supply of Insulation Sets for Ground Connection, Made of Nylon for 220mm throw Point Machine as per Specification No. IRS.S.40/84 or latest. One Set consisting material of: (a) Insulating Washer Drg. No.-S-8640 = 12 Nos. (b) Insulating Washer Drg. No.- S-8640/1-04 Nos. (c) Insulating 64 Washer Drg. No.-S-8640/2-02 Nos. (d) Insulating Bush Drg. No.-S-23199-06 Nos. (e) Insulating Bush Drg. No.-S-3463-01 No. (f) Insulating Bush Drg. No.-S- 22179-02 Nos. (g) Insulating Bush Drg. No.-S- 8912-02 Nos. (h) Insulating Plate Drg. No.-S-3404-02 Nos. (i) Insulating Bush Drg. No.-S-8813-04 Nos. (j) Insulating Plate RH Drg. No.-S-3592-01 Nos. (k) Insulating Plate LH Drg. No.-S- 3593-01 Nos. Material to be supplied from RDSO approved firms. Inspection: By Consignee.
250
1278
319582.5
... More
Supply of Hydrometer, Exide make or similar for measuring specific gravity of Battery Graded acid with mounting stand in location Boxes. Inspection: By Consignee.
500
258
129320
... More
Supply of Reflective Tape of RED Highlighter grade retro reflective tape conform to IS 14221 latest, BIS marked, Grade 2, Pressure type bonding for (Grade 1) R1-P. Inspection: By Consignee.
200
105
21056
... More
Supply of 2 Aspect colour light signal unit complete without holders, lamps, lenses and signals transformers, as per RDSO Drg. No. SA-23003 A/M (Adv), Alt-9 or latest, spec. IRS-S-26/64, Rev.1 or latest. Inspection: by consignee.
10
18446
184462.8
... More
Supply of 3/4 Aspect colour light signal unit complete without holders, lamps, lenses and signals transformers, as per RDSO Drg. No. SA-23002 A/M (Adv), Alt.-9 or latest,SA-23001 A/M (Adv), Alt.-9 or latest respectively, spec. IRS-S-26/64 or latest. Inspection: By Consignee.
10
22695
226955.3
... More
Supply of colour light signal post 3.6m and ladder 3.5M with bases as per IRS specification No. IRS-S-6-81, Rev-3 or latest. Inspection: by consignee.
10
19064
190641.9
... More
Supply of colour light signal post 4.6m and ladder 4.5m with bases as per IRS specification No. IRS-S-6-81 or latest and RDSO Drg. No. SA-23153 (Adv) with latest amendments. Inspection: By Consignee.
10
21184
211846.2
... More
Supply of SMF Rechargable lead acid Battery 12V 7AH. Make Exide, Amron, Luminious or similar or better. Inspection: By Consignee
150
727
109158
... More
Supply of Handheld Digital Earth Clamp Tester for clamp on earth/ground resistance 72 measurement up to 1000 ohms. Accuracy 0.1 - 0.99 : 1%, 1 - 49 : 1.5% Also measure current leakage up to 20A. No spikes required for measurement. make KRYKARD (CA-6417)/ Motwane (DECT-2) /Stanlay/ Fluke or equivalent or better. Inspection: By RITES.
15
85920
1288812
... More
Supply of terminal block 25mm center M-6 (ARA terminals) as per IRS spec. No.IRS-S- 75/2006 (Rev.2) and IRS drawing No. SA-23741A(Alt.4), SA-23745(Alt.5), SA-23746 and SA- 23756(Alt.3). Inspection: By RDSO.
5000
70
354000
... More
Supply of Repro scan Sheet Fed 42 inches Wide format scanner (Repro ter scan 42 MFP 74 ready 44''2 Roll Plotter with 5year warranty) Technology- Inkjet, Speed-1A0/min, Size-44'' to A4 Media handling- 2 rolls with Manual cut sheet feed No. of Ink-5 Scanner Technology- CIS Document size-42'' Optical Resolution (DPI)-1200 dpi Brand Type : Repro or similar or better (Registered Brand) Inspection by RITES.
1
1364000
1364000
... More
Supply of CO2 Fire extinguisher 4.5 kg capacity confirming to IS 15683: 2018 or latest with ISI mark provided with all fittings and accessories. Inspection by Consignee.
50
3688
184412.5
... More
Supply of New Magnet switch for boom lock, magnet proximity switch in robust AL Die cast body with dual contacts and 2 magnets for actuation for Heidz make electrical lifting barrier at various interlocked level crossing gates. Inspection by Consignee.
15
1923
28851
... More
Supply of Master Telephone Unit with voice logging facility for Electronic LC Gate Telephone System as per Specification No. RDSO /SPN/TC/51/2021 Rev 1.0 or latest. Inspection by RDSO.
16
46247
739952
... More
Supply of Gate Telephone (Slave Telephones) for Electronic LC Gate Telephone System as per Specification No. RDSO /SPN/TC51/2021 Rev 1.0 or latest. Inspection by RDSO.
30
5061
151832.7
... More
Supply of Power Supply System with MF Battery of 12V/24V DC (12V DC supply shall be 79 connected to the Station Telephone Unit and 24V shall be fed to Line Circuit) with maintenance free battery for electronic LC gate telephone system as per Specification No. RDSO/SPN/TC-51/2011, Rev 3.0 Amd.1 or latest including battery charger. Inspection by RDSO.
16
6233
99730.56
... More
Supply of Fuse auto changeover system for Railway Signaling System as per 80 RDSO/SPN/209/2012 rev.1 with latest amendments. One Automatic changeover Unit comprise 24 nos. of external Non Deteriorating Type or 'G' type fuses from 4 Amp to 10 Amp capacities which are in signaling circuits. System shall have 6 cards with monitoring arrangement of 4 fuses in one card. Inspection by RDSO
25
39463
986584
... More
Supply, testing and laying of 2nd class well burnt 'B' class bricks in trench breadthwise over the top of cable throught i.e. 8 bricks in one meter over whole of the cables. Bricks shall be got staked and got inspected by Rly. Representative before laying. Inspection: By Consignee
240000
7
1896000
... More
Boring and Trenchless cabling along with supply and insertion of HDPE pipe of PE 80 02 PN 8 grade of 90mm dia with min. 6.7mm and max. 7.6mm wall thickness as per IS 4984:2016 in the bore for the laying of signalling/ Telecom/ Power cables under the track/ road. (cable lying is covered separately). HDPE pipe is to be supplied by the contractor. Inspection- RITES for pipe,Consignee for execution
1200
1006
1207908
... More
Fabrication, supply and fixing of concrete cable marker as per IRSEM drg. No. 15-D1. The marker shall be fixed at various places of cable route as per instruction of Eng. at site. Inspection by Consignee.
1000
1380
1380700
... More
Fabrication, Supply and fixing of retroreflective P/G/C/A/AG/IB markers with complete 04 fittings as per approved Drg. No. NR/SnT/CON/6.2/97. All material required for the job such as MS sheet, MS angle. Nut and bolts will be supplied by the Contractor. The P and G markers shall be as per Drg. No.S-23456(Adv) and SA 23477(Adv) respectively. Inspection: By Consignee. 05
70
858
60124.4
... More
Supply and fixing of MS Flat 40mm x 6 mm size. Inspection: By Consignee.
1000
197
197800
... More
Supply and installation of earth electrodes as per std. practice. The item includes digging of pit in earth, 3 Mtrs. deep and fixing earth electrode pipe. Casting of cement concrete enclosures as per drg. No. (NR/SnT/CON/6.4/97). The soil treatement shall be done as per std. pratice. 06 The item includes provn. of mild steel flat of size 35mm x 6mm (as per IRSEM) and nut bolted connection of MS flat with earth electrode. The other end of mild steel flat to be connected to block instrument, cable sheath of power equipment, signal base, apparatus case, CT rack / relay racks, other equipments as per the instruction of Engr. at site and IRSEM. Earhting connection location to location shall be done through cable which shall be provided by Railway. Complete materials such as earth electrodes as per drg. No. (NR/SnT/CON/6.3/97), cement, wiring material, nut bolt for connection and mild steel flat of size 35mm x 6mm or 210 sqm as per SEM etc. to be supplied by the contractor. Inspection: By Consignee.
70
3632
254276.4
... More
Supply, installation and commissioning of maintenance free earth suitable kit as per RDSO specification RDSO/SPN/197/2008 and Drg No. SDO/RDSO/EnB/002 dated 19.09.2008 or latest with latest amendments. Earthing kit consist of: 1. Earthing electrode of 17mm dia and 3 meter long- 01 no. 2. MEEB (300mmX25mmX6MM) -01 no. 3. SEEB (150mmX25mmX6mm)-01 no. 4. Earth enhancing compound-30 Kg (minimum). This include provision of earth connection from MEEB to SnT equipment i.e. cable sheath, apparatus case, IPS, data logger, MSDAC, SSDAC etc. with PVC earth wire 07 of size 16/25Sq.mm through copper lugs of suitable size. PVC wire shall be supplied by Railways.Note: At certain locations it may not be possible to achieve earth resistance of less than 1.0 ohm with one earth electrode/pit due to soil resistivity. In such case provision of loop earth consisting of more than one earth pit shall be done. For inter-connection of two earth pits copper tape of size 25x2 sq. mm shall be provided by contractor. The number of pits required shall be decided based upon the resistance achieved for the earth pit already installed. The procedure mentioned above for one earth pit shall be repeated for other earth pits. The other earth so installed for the purpose of loop earthing arrangement shall be counted as separate earth. Inspection: By RITES for supply portion.Consignee for execution
50
22607
1130394
... More
Supply and fixing of GI Pipe with 76.6 mm maximum and 75.3 mm minimum outside dia. And 3.6 mm thickness,as per spec no IS-1239 or latest if any, medium grade, perforated at a 08 distance of 20 cm or less of required length at culverts/bridges/along the cutting ,suitably cocreted at both ends as per drg. no NR/SnT/CON/1.4/97.GI. clamps of M.S flats bolts and nuts to be supplied by the contractor. G.I pipe and other associated material to be inspected by consignee. Work at site will be inspected by Consignee/ Site Engineer
780
815
636027.6
... More
Supply and Installation of RO membrane based De-ioniser plant to produce Battery water of TDS less than 5 ppm irrespective of the quality of raw water, pH Value:- 6.5 to 7.2, specific electric conductivity :- 0 to 5 micro mhos/cm at 25 Degree Celsius, output capacity should be 12-15 Ltr purified water/Hour. Plant should have suitable fixture/wall mounting arrangement with external PVC storage tank of capacity 200 Ltr, Plant should have on board TDS meter, Indication of On/Off, Solenoid/Flow switch fitted to avoid dry run of the machine, Weight sensor/Float switch installed on storage tank to avoid over flowing of the tank. The item includes supply of one set of the spare 09 filters/membranes in addition to the fitted filters-membrane with the machine (spare should be of similar spec/type as used in the machine). Plant should work on 230V AC input (Internally works on 24V DC) and should not require any type of chemical re- charging except filters and membranes. The life of filter/membrane should not last before production of minimum 12000 Ltr of battery water. Item includes supply of all the accessories required for installation of the plant like fasteners, connecting pipes (of length up to 2 Mtr), cable from wall socket to the machine (of length up to 2 Mtr), couplers/tap required to connect it from water tap/outlet, PVC pipe up to storage tank (of length up to 2 Mtr). The quality test certificate of produced water must be submitted by the supplier from any repudiated test laboratory. The OEM should give onsite warranty of one year. Inspection: By Consignee. Payment terms: 100% after installation.
2
57843
115686.16
... More
Supply and provison of straight through joints thermo shrink jointing kit with the help 10 of thermo shrink jointing kit as per specifications, drawings and stipulations of tender documents and as per approved cable route plan at various locations for 06Quad/04 Quad cable. Jointing kits to be supplied as per RDSO specification IRS:TC 77-2012 (Rev.-3) or latest amendments. Inspection by Consignee for supply portion. Inspection: By Consignee.
50
7115
355784
... More
Supply, installation and wiring of Earth leakage detector (12 Channel) for monitoring 11 different AC and DC, supplies including all accessories as per RDSO specification no. RDSO/SPN/256/2002 or latest and stipulations of tender document. Inspection: by RDSO for supply portion.Consignee for execution
5
166612
833062.05
... More
Excavating and refilling of trench in Normal Soil to the level of ground with rammed 01 earth as per drg. No.(NR/SnT/CON/1.1/97-A) so as not to form a drain 0.3 Mtrs. Wide and 1Mtr. Deep on both side of the station alongside the track. It shall conform to the safe distance as per signalling and cable route plan in all type of soil, It also includes clearance of routes of trees and bushes. Lesser depth due to site condition shall be paid proportionately. Inspection: By Consignee.
30000
83
2492100
... More
Laying of signalling/Telecom/power cables of different sizes as per approved Drg. No. NR/SnT/CON/1-1/97C and as per cable route plan approved by Railways and meggering of cable before and after its laying of all type of outdoor cables. Inspection: By Consignee.
145000
8
1260050
... More
Termination of all cores of all types of main outdoor cables after its laying on both ends and providing number ferrule on each core under supervision of Railway representative. This also 03 includes preparation of test report for core to core and core to earth on prescribed Performa for each core of the cable separately. This also includes dressing and lacing of cables on both ends. Performa for testing and material for lacing to be supplied by the contractor. Termination of both end of core will be counted as one. Inspection: By Consignee.
4000
13
53720
... More
Fixing, wiring , Testing , adjustment of Point Machine as per standard practice. Its also includes: (i) Fixing of switch extension 'P' bracket, providing insulation for switch extension bracket, fixing ground connections, adjusting the correct opening of switches and adjusting the point machine with crank handle. ii) Wiring inside the point machine, erection and wiring of JB with lock and key as per drawing, provided with terminal strips (if required). (iii) Supply and fixing of GI pipes with flange for taking cable in to point machine and jn. Box through gland/GI pipe. (iv) Complete material for installation viz. point insulation material, Jn. box, GI pipe, gland pipe, wiring material, nut and bolts of 04 various sizes, angle iron of size 75mmx75mmx10mm, channels for fixing the machine, lugs for point rodding and insulation materials for stretcher bar 90R/52kg/60kg as per .drg.no.SA-23171 (adv.) Alt.1 will be supplied by the contractor. (v) Smithy and fitting work required at site for complete installation of Gauge tie plate and insulation of GTP as per approved Drg.no.NR/SnT/CON/7-6/97 and william stretcher bar (if reqd.) will be done by the contractor. Machine shall be overhauled by contractor if required. (vi) This includes removal of existing gears and fixing the machine at raised level on channel as per standard practice to avoid flooding wherever required. (vii) Supply of ground connections of electric point machine, non insulated GTP and CTP extension plate,Jn. box and stretcher bar shall be made available by the Rlys. in which the supply of ground connections, Jn box is covered separately. Inspection: By Consignee.
135
9494
1281791.25
... More
Dismantling and releasing of Point equipments which includes all SnT fittings of electrical and mechanical, facing point lock/ hand plunger lock/ lock bar / holding bar/ EPD/ mechanical 05 detecter/ Pt. machine with all attachments. All dismantled material to be transported and stack in the store of DY.CMM/JUDW/SSB store depot or any SSE/Sig/Stores of UMB division or any other store of N.Rly as per consignee. Note :- Before dismantling joint survey is to be done with the site engr. and report to be submitted to the site engr. (1 Job= 1 Point). Inspection: By Consignee.
135
1385
187074.9
... More
Casting, concreting and curing of foundation and erection of single apparatus cases of size (1160mmX760mm at surface and 650 mm deep as per approved drawing no. NR/SnT/Con./2.7/97. 06 A layer of 3mm of Bitumin compound has to be provided between foundation and location box to prevent ingress of water in the base of location box. All material such as cement, coarse, sand, aggregate and anchor bolts shall be supplied by the contractor. apparatus case single will be supplied by railway. Contractor is required to execute all type of repair works of foundation if required during inserting the cable for termination. Inspection: By Consignee.
25
6519
162993.5
... More
Preparation of App. Case single not involving wiring of relays: Preparation and fixing of bakelite hylum sheet 910x800x6mm and Backelite shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts.This includes fixing of fuses, ARA terminal, fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the 07 hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry Works covered with sand and plastering.Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including Backelite shelf, hylum board, salwood plank, wire and wiring material, non deteriorating type HRC fuses with bases, catenary wires, nuts and bolts and other items shall be supplied by the contractor and shall be as per the RDSO specn.(as applicable). ARA terminals only shall be supplied by the Railways. Inspection: By Consignee.
17
5706
97002.34
... More
Preparation of App. Case single involving wiring of relays: Preparation and fixing of bakelite hylum sheet 910x800x6mm and bakelite shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts. This includes fixing of fuses, ARA terminal, Q series relays and other type relays on square bars fixing and 08 jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry Works covered with sand and plastering. Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including Bakelite shelf, hylum board, salwood plank, wire and wiring material, non deteriorating type HRC fuses with bases, catenary wires, nuts and bolts and other items shall be supplied by the contractor and shall be as per the RDSO specn.(as applicable). Relays, ARA terminals only shall be supplied by the Railways. Inspection: By Consignee.
8
6396
51175.84
... More
Casting, concreting and curing of foundation and erection of half app.cases of size (670mmx760mm) and 650mm deep as per Drg.No.NR/SnT/CON/2.8/97. A layer of 3 mm of bitumen 09 compound has to be provided between foundation and location box to prevent ingress of water in the base of location box. All material such as cement,coarse,sand, aggregate and anchor bolt shall be supplied by contractor. App. Case half will be supplied by Railway. Contractor is required to execute all type of repair Works of foundations if required during inserting the cable for termination. Inspection: By Consignee.
15
4592
68892.75
... More
Preparation of App. Case half not involving wiring of relays: Preparation and fixing of bakelite hylum sheet 910x800x6mm and Backelite shelf 900x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts.This includes fixing of fuses, ARA terminal, fixing and jamming of cables with 2 inch thick salwood plank provided at the bottom. This will include opening, pasting and jamming armour of each cable in the 10 hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry Works covered with sand and plastering.Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including Backelite shelf, hylum board, salwood plank, wire and wiring material, non deteriorating type HRC fuses with bases, catenary wires, nuts and bolts and other items shall be supplied by the contractor and shall be as per the RDSO specn. (as applicable). ARA terminals only shall be supplied by the Railways. Inspection: By Consignee.
10
3861
38615.7
... More
Preparation of App. Case half involving wiring of relays: Preparation and fixing of bakelite hylum sheet 450x800x6mm and bakelite shelf 450x450x25mm duly fixed by angle iron piece of different size inside all the app. Cases. Hylum board shall be fixed on an angle iron frame of 25mmx25mmx3mm. Angle iron frame will be fixed in location boxes secured by nuts and bolts. This includes fixing of fuses, ARA terminal, Q series relays and other type relays on square bars fixing and jamming of cables with 2inch thick salwood plank provided at the bottom. This will include opening, 11 pasting and jamming armour of each cable in the hole drilled separately for each cable through the salwood plank and all cable entry points on location boxes, location huts, JBs relay room/battery room to be closed with suitable masonry Works covered with sand and plastering. Wiring description for terminal drawing of circuits, inside app. Case. Painting from out side as well inside with red oxide and aluminum paint is covered separately. Size of lettering will be 100mm or as per instructions of Engineer at site. All materials including Bakelite shelf, hylum board, salwood plank, wire and wiring material, non deteriorating type HRC fuses with bases, catenary wires , nuts and bolts and other items shall be supplied by the contractor and shall be as per the RDSO specn.(as applicable). Relays, ARA terminals only shall be supplied by the Railways. Inspection: By Consignee.
5
4747
23739.8
... More
Transportation of signaling /Telecom materials by road from various stores of SSE/Sig 12 and SSE/tele of UMB division or GZB depot, SSB depot, JUDW depo etc. as per the instructions of the railway representative at the site. The work also includes loading, unloading and stacking of the materials.Inspection-Consignee
90000
9
848700
... More
Hiring of JCB/Hydra/ Poclain machine (in good working condition) for levelling and dressing of ground/ dismantling structures including disposal of debris through dumpers/Shifting the 13 location box or signal post with foundation etc. with contractors labour, JCB/Hydra /Poclain machine, machine operator, fuel etc. Payment shall be made for actual working hrs. at site and proportionate payment to be made in case less than hours. Note: Vehicle shall not be more than 3 years old. Inspection: By Consignee.
40
822
32919.2
... More
Concreting unscheduled items in concrete of 1:3:6 ratio in cement, coarse sand and 14 aggregate 25mm at different places in the yard and plastering top in fine plaster of 1:4 cement sand ratio. It also includes the excavation of earth as required at site and as per instruction of site in charge. The volume in cubic meters shall include the volume occupied by any CI foundation, trestle, MS angle or flat or GI pipe required to be embedded in the casting. Cement coarse sand and aggregate 25mm are to be supplied by the contractor. Inspection: By Consignee.
30
3476
104298.9
... More
Earth work for excavation and refilling around location boxes and signals etc. where 15 necessary including 50M lead and 1.5M lift. The lead is to be measured from centre of gravity of location to the centre of filling and lift from main ground level. The earth work should be well rammed including breaking of clods, leveling and dressing etc. as per instruction of Engineer at site. Inspection: By Consignee.
40
148
5934
... More
Cleaning, Scrapping, Painting and lettering of all newly installed and existing gears such as signals, point equipment, track circuit equipment with T.C. no. on rail app. Cases JB. TL JBs point rodding cranks, compensators etc. including gate equipment if existing in station section as per 16 the provision of IRSEM. All paints (ISI marked) shall be approved by Railway Engr. and painting material to be supplied by the contractor. This item also includes writing and painting requirement of all indoor and outdoor gears along with making of all circuit nos. near terminal and terminal boards/track in app. Cases, junction boxes, relay room, SMs room, writing of relay nomenclature fuse nos. and equipment nomenclature as the approved plans and as per provision of IRSEM. Inspection: By Consignee.
20
25547
510940.6
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Apparatus Case Full Size. Inspection: By Consignee.
300
122
36885
... More
Lettering / Numbering Termination particulars, equipments names etc., legibly and neatly inside location boxes. This includes supply of paints of Asian Paints/ Nerolac / Dulux / Berger make. Apparatus case Half Size. Inspection: By Consignee.
300
84
25293
... More
Maintenance of signalling gears required for the execution of track machines such as unimate , MP-2007, CSM, DUMETC,BCM, SRM and any other track maintenance machine work includes:- a) Proper dressing of Track Leads jumpers/removing and re-fixing of axle counter track devices as required by Railway representative at site before and after commencing of Unimate, MP- 19 2007, CSM, DUMETC, BCM, BRM and SRM etc machine. This includes replacement of defective jumpers Bonding etc. Jumper/Bonding will be provided by Railway. b) Dismantling and ReFixing Turn out, Installation and testing of rodding set for point machines and point machine as per direction of railway representative at site. (c) All damaged cable due to unimate, MP-2007 CSM, DVO METIC, BCM SRM and any other Track maintenance machine work should be meggered properly and it required, should be replaced by the contractor as directed by railways representative at site. Cable will be supplied by railway. (Machine Days =Numbers) Inspection: By Consignee.
200
3809
761988
... More
Installation, testing and commissioning of electric lifting barrier complete with Panel, 20 motor, booms,weights, warning bells, hooters etc to make complete system compatible with gate panel as per approved signalling plan. The item includes casting of foundations for gate machines. wiring of road signals, hooters and flashers as per approved diagrams/plans. Inspection: By Consignee.
2
31105
62210.88
... More
Brick work with well burnt bricks in foundations and plinths with cement and sand (ordinary) mixture of 1:4 ratio. All material is to be supplied by the contractor. Inspection: By Consignee.
10
3494
34943.8
... More
Fixing of Stop Board, Block section limit Board, Shunting Limit Board, goods warning 22 board, Calling on Board with contractors own material. This excludes supply of Stop Board / Block section limit Board / Goods warning board/Calling on board. The work shall be done as per instruction of Rly Engineer at site. Inspection: By Consignee
40
269
10765.6
... More
Casting, concreting and curing of foundation for main signal of size (1,041mm X 23 1,041mm ) at bottom and (711mm X 711mm) at top and 1,750mm deep as per Drg. no. NR/SnT/CON./2. 1/97 all material such as anchor bolts, cement, sand aggregate to be supplied by contractor. Inspection: By Consignee
20
12112
242247.8
... More
Fixing of CLS surface base, bolting on the foundation. Erection of CLS post with signal unit on the top or on an off-set bracket and fitting ladder and guard to the post at the top. Concreting ladder base and embedded into the ground with supporting bracket in the middle, blanking of the ladder for a distance of 1 feet between the height 6' 9" and 7'9" from the rail level by MS angle and 24 MS sheet 6mm thick wherever required. This includes provision of wooden (SAL) cross arm 1 mtr x 1 mtr for CLS unit prior to the commissioning, fixing of LED aspect, current regulator and hoods of CLS unit, terminating cables, wiring the CLS unit and focusing the signal. Elevation and distance of foundation from track shall be in accordance with schedule of dimension for Indian Railways and as per NR practice. All items for the above works except Signal unit, LED signal, Signal post, Base and Ladder shall be supplied by the contractor including but not limited to the following: i) "U" bolt for offset brackets, ii) Wooden cross arm 1 mtr. x 1 mtr., iii) MS angle and MS sheet for blanking of ladder, iv) Supply and fixing of signal number plate (Retro reflective) with complete fittings as per standard railway practice. v) Wire mesh guard, lock for unit if required, nuts, bolts etc for the following: (a) Installation, erection, wiring of 2 aspect color light signal. Inspection: By Consignee
10
3279
32793.8
... More
Fixing of CLS surface base, bolting on the foundation. Erection of CLS post with signal unit on the top or on an off-set bracket and fitting ladder and guard to the post at the top. Concreting ladder base and embedded into the ground with supporting bracket in the middle, blanking of the ladder for a distance of 1 feet between the height 6' 9" and 7'9" from the rail level by MS angle and MS sheet 6mm thick wherever required. This includes provision of wooden (SAL) cross arm 1 mtr x 1 mtr for CLS unit prior to the commissioning, fixing of LED aspect, current regulator and hoods of CLS 25 unit, terminating cables, wiring the CLS unit and focusing the signal. Elevation and distance of foundation from track shall be in accordance with schedule of dimension for Indian Railways and as per NR practice. All items for the above works except Signal unit, LED signal, Signal post, Base and Ladder shall be supplied by the contractor including but not limited to the following: i) "U" bolt for offset brackets, ii) Wooden cross arm 1 mtr. x 1 mtr., iii) MS angle and MS sheet for blanking of ladder, iv) Supply and fixing of signal number plate (Retro reflective) with complete fittings as per standerd railway practice. v) Wire mesh guard, lock for unit if required, nuts, bolts etc for the following: (b) Installation, erection, wiring of 3/4 aspect color light signal. Inspection: By Consignee
10
4739
47398.6
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%