North Western Railway Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 2,06,200Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Electrical Work In Connection With Raising Of Passenger Platform No. 1 At Jamsar Station, platform No. 2 At Bhagwansar, Platform No. 1 & 2 At Rajiyasar, Platform No. 2 At Prithvirajpur, platform No.1 At Sangat Station Along With Extension To 575 Meters, Provision Of Additional high Level Platform At Sangaria Station For Scheduled Crossing Of Trains Along With Provision of Foot Over Bridge, From Rail Level To High Level Along With Extension To 576 Meters, Raising Of passenger Platform As High Level At Nangal Mundi Station, Extension Of Passenger Platform to Accommodate 24 Coaches Trains At Jharli Station, Budhsinghwala Halt Station, development Of Customer Facilities/amenities At Goods Shed Of Bhattu Station, Development of Circulating Area And Provision Of Pf Shelter And Other Allied Work At Bhiwani City Station and Installation Of Limited Functionality Hot Axle Box And Hot Wheel Detector Over Bikaner division.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
18-El-BKN-E-TENDER-23-24-BIKANER DIVISION-ELECTRICAL/NORTH WESTERN RLYTender No
18-El-BKN-E-TENDER-23-24Tender Authority
North Western Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Supply and fixing of wooden board made up of teak wood with back cover of teak wood, duly finished and 3mm sunmica sheet as front cover, zinc plated/ brass screw, cup washer etc. on wall, as reqd. Size - 210mm x 140mm x 50 mm
10
53
530
Supply and fixing of PVC conduit/casing caping (as per instruction of site supervisor) and its accessories, size 25 mm, thickness 1.6 mm As per IS 9537.
420
40
16800
Supply and fixing of rigid PVC Trunking size 35mmX30mm and heavy thick as per spec.
300
62
18750
Supply and fixing of MS conduit with its accessories, size 25 mm dia, thickness 1.6 mm as per IS 9537 part II.
2440
47
114680
Making and filling of chase for 25 mm dia PVC/MS conduit. Surface of chase shall be made good in all respect and satisfaction of engineer incharge.
140
8
1120
Supply and fixing of ceiling rose complete as per site requirement. Ceiling rose should be reputed make and as per technical specification.
609
24
14616
Supply and fixing of modular ceiling rose complete as per site requirement. Ceiling rose should be reputed make and as per technical specification.
330
50
16500
Supplying and drawing 2.5 sq. mm PVC insulated multistrand copper conductor cable as submain and 1.5 sq. mm PVC insulated multistrand earth copper cable voltage grade 1.1 kV as earthing wire conforming to IS: 694-1990 in existing conduit/casing caping. Wire should be of reputed make and as per tech. spec.
6590
29
191110
Supplying and drawing 4.0 sq. mm PVC insulated multistrand copper conductor cable as submain and 1.5 sq. mm PVC insulated multistrand earth copper cable voltage grade 1.1 kV as earthing wire conforming to IS: 694-1990 in existing conduit/casing caping. Wire should be of reputed make and as per tech. spec.
3000
40
120000
Supply of 18/20 watt LED four feet tube light fitting complete with tube and all accessories as per specification.
100
138
13800
Fixing of LED four feet fitting complete with tube. (Fitting is not included in it)
868
30
26040
Fixing and commissioning of ceiling fan with nut bolt ensuring all safety aspects. Contractor is responsible for falling of fan within a period of 12 month.
40
24
960
Supply, installing, testing and commissioning earth electrode complete in all respect with perforated 16 GI pipe medium "B" class (Blue) confirming to IS 1239 part-I length of 4 mtr., bore 50mm with all accessories like nut bolt, reducer nipple, wire meshed funnel and CC finished chamber covered by CI/RCC frame etc. Digging pit and refilling it with charcoal and salt in successive layers and connection with 25x3 mm GI strip and as per IS:3043 and drawing and testing of earth resistance as reqd.
128
1704
218112
Supply of unit maintenance free earth material as per RDSO Specs. No RDSO/PE/SPEC/PS/0/0109 ( REV.0 ) 2008 or Latest
17
9607
163319
Installation of unit maintenance free earth as per RDSO Specs. No RDSO/PE/SPEC/PS/0/0109 ( REV.0 ) 2008 or Latest
17
4046
68793.39
Removal of existing Rail/Swage poles from station area. Rail are to be cut 0.5m below the ground level & making the ground level good by suitable cement concrete and transportation of rail pole and all accessories with fitting etc. complete from site to place located at that station by concern SSE/Elect.
71
509
36139
Removal of existing octagonal pole. & making the ground level good by suitable cement concrete and transportation of rail/swage/octagonal pole and all accessories with fitting etc. complete from the site to place located at the station by concern SSE/Elect
26
147
3822
Supply of material, foundation bolts etc and casting of foundation suitable for 5 Mtrs pole with cement concrete ratio 1:2:4 as per technical specification and satisfaction to site engineer. (Supply of Octagonal Poles are not included in this NS)
24
2447
58728
Erection of octagonal Pole with fixing and installation of street light fitting including labour charges and other expenditure as instructed by site engineer.
24
507
12168
Supply & erection of 5 m high with double arm model no. BOP-5030 of Bajaj or similar, shaft material S355 J0 grade or equivalent, hot dip galvanized steel octagonal pole with galvanized base plate of 23 200x200x12 mm, junction box with 6 Amp. MCB and stud terminals (for mounting inside the base compartment of pole), foundation bolt size 4x16mm dia. 600 mm in length including excavation and making foundation as per spec. and drawing. It shall be galvanized internally and externally by single dipping methods. The pole and foundation shall be made as per specification and drawing attached.
244
7490
1827560
Supply of LED street light 45/50 Watt fitting complete with tube, driver and all accessories as per specification.
30
1795
53850
Supply of LED street light 70/72 Watt fitting complete with tube, driver and all accessories as per specification.
82
3930
322260
Fixing of LED street light/flood light complete as per site requirement. (Fitting is not included in it).
564
109
61476
Supplying fixing and commissioning of street light fitting accessories e.g. GI pipe of bore 25mm, clamps, nuts, bolts, cable etc as per instruction of site engineer.
72
131
9432
Supply and fixing of Double Door MCB DB SP 12 way (10+2 module), neutral and earth link, with one no. DP MCB 40 amp, one no. DP RCCB 40 amp 30 mA and eight no SP MCB 32/25/16/10/6 amp. 'C' series. Breaking capacity not less than 10 kA. MCB, RCCB and DB should be as per tech spec. and of same make.
5
5283
26415
Supply and fixing of Double Door MCB DB SP 10 way (8+2 module), neutral and earth link, with one no. DP MCB 40 amp, one no. DP RCCB 40 amp. 30 mA and six nos. SP MCB 32/25/16/10 amp. 'C' series. Breaking capacity not less than 10 kA. MCB, RCCB and DB should be as per tech spec. and of same make.
3
5159
15477
Supply and fixing of single phase Double Door MCB DB SP (4+2) way, with DP MCB 40 amp 'C' series one number & SP MCB 32/25 amp. 'C' series four number. Breaking capacity not less than 10 KA.
1
2612
2612
Supply and fixing of MCB 3 Pole + N 32 Amp. with Box Breaking capacity not less than 10 kA. Box should be same make.
1
1637
1637
Supply and fixing of MCB DP 32 amp with box. Breaking capacity not less than 10 KA.
7
1315
9205
Supply of 4 x 16 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098(Part-1) and as per tech spec. of reputed make
14000
107
1498000
Laying, connecting, testing and commissioning of 4 x 16 sqmm, 1.1KV grade, LT XLPE/PVC insulated PVC outer sheathed aluminum conductor armoured cable in trench/pipe/air as per spec.
17300
7
121100
Supply of 4 x 50 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098(Part-1) and as per tech spec. of reputed make.
4350
219
952650
Laying, connecting, testing and commissioning of 4 x 50 sqmm, 1.1KV grade, LT XLPE/PVC insulated PVC outer sheathed aluminum conductor armoured cable in trench/pipe/air as per spec.
4350
7
30450
Supply of 2 x 70 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098(Part-1) and as per tech spec. of reputed make.
600
219
131400
Supply of 4 x 70 sq. mm, 1.1KV grade, LT XLPE insulated PVC outer sheathed aluminium conductor armoured cable confirming IS: 7098(Part-1) and as per tech spec. of reputed make.
500
326
163000
Laying, connecting, testing and commissioning of 4 x 70 sqmm, 1.1KV grade, LT XLPE/PVC insulated PVC outer sheathed aluminum conductor armoured cable in trench/pipe/air as per spec.
500
14
7000
Digging and filling of trench size 0.4 x 0.8 mtr as per spec. (trench work may be on kuchha/pucca land and all type of soil as per site requirement and without protective layer of brick) Surface of trench shall be made good in all respect and satisfaction of site engineer
20000
33
660000
Supply of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness minimum 3 mm.
19600
56
1097600
Laying of HDPE pipe conforming to IS 4984:2016, 50 mm dia, wall thickness minimum 3 mm. The work involves laying of HDPE pipe.
19600
7
137200
Supply and fixing of junction box size 390/388x305/304x170mm comprising of SMP/FRP material 44 with rubber gasket, padlock arrangement, zinc passivated earth bolt, etc. with 4 no. aluminum busbar cap 200 Amp. each, suitable for 415 volt supply requirement. The box shall be fixed robustly with clamps at pole/ wall as per requirement. All the material should be of good quality.
51
1798
91698
Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 38 mm dia. Pipe should be of reputed make and as per tech. spec.
84
125
10500
Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 50 mm dia. Pipe should be of reputed make and as per tech. spec.
45
172
7740
Supply, laying and fixing of GI pipe medium "B" class (Blue) confirming to IS 1239 part-I for passing incoming and outgoing cable from ground through it size 100 mm dia. Pipe should be of reputed make and as per tech. spec.
300
543
162900
Laying of Spun/MS/GI/HDPE/RCC/DWC pipe size up to 450 mm by drilling of Horizontal bore by machine in Railway yard/below track/Road.
460
902
414920
Fabrication, supply, fixing, testing and commissioning of OFF delay timer panel comprising of analogue multifunction timer with OFF delay/Signal OFF delay function with timing range adjustable upto 30 minutes minimum for OFF delay (L&T GIC model no. Micon 175 - 1CMDT0 or similar of reputed make), 3 Pole 49 power contactor AC3-40A / AC1-55A, 240 VAC coil, 2 nos. LED based illuminated flush type push switch with 2 NC/NO contact for ON/OFF, SP MCB 6A, 10 kA 'C' series for control wiring, four terminal connecting strip 63 A min. for incoming and outgoing and other accessories including power (min. 10 sqmm copper wire) and control(min. 1.0 sqmm copper wire) wiring. Panel should have good finishing in all respect to the satisfaction of Railway authority. Panel should be as per tech spec. and its sample should be got approved by competent authority prior to supply and commissioning.
13
5133
66729
Supply, fixing, testing and commissioning of RCBO 25A,double pole/four Pole, 30mA with Earth leakage, overload and short circuit protection as per spec
39
2354
91806
Supply, fixing, testing and commissioning of RCBO 63A, four pole, 30mA with Earth leakage, overload and short circuit protection as per spec
1
3630
3630
Supply and fixing of 4 module metal encloser for fixing of RCBO as per IEC 61439-3, Suitable for flush mounting and surface mounting with door for IP 54, similar to Legrand model no. 5077 91/93 of reputed make
35
607
21245
Supply, fabrication, fixing, testing, commissioning and connecting of double sided LED based glow signage boards including fabrication and supply of clamping arrangement as desired by site engineer. Guarantee- 05 years from date of commissioning
126
1685
212310
Transportation, testing commissioning of water coolers 150 liters or above as per site requirement and instruction of site engineer,
4
2544
10176
Supply, fabrication and fixing of MS cage made of suitable size MS angle and MS jali 1"x1" to 55 provide protection of pit light /electrical equipment/water cooler with two nos of key locks & two nos hinges including one coat of red oxide and two coats of Enamel paint along with fixing arrangement on existing wall/ rail/pipe by nutbolt/clamp/washer etc. per specification.
7850
44
345400
Making foundation suitable for water cooler with the help of bricks & cement including paints etc as per site requirement/as instructed by site engineer.
23
2000
46000
Supply and fixing of double hinge type FRP outdoor box with transparent lid to accommodate DP/TP "C" series, MCBs of reputed make.
6
893
5358
Supply, fixing, testing and commissioning of fabricated feeder pillar distribution box made of MS sheet 1.6 mm thick size 600mmX300mmX600 mm with suitable MS stand, copper bus bar of minimum 200 Amp capacity and 2X63 Amp 4 Pole MCB as per technical specification.
3
5680
17040
Supply, erection, testing & commissioning of 12.50 mtrhighmast shaft totally hot dip galvanized and suitable for wind velocity as per IS 875 Part-3. The mast shaft shall be in two finished section. It shall also include accessories for 12.5 Mtrs high mast including head frame, steel wire rope 6 mm dia (7/19 construction) double 59 arm winch, galvanized lantern carriage arrangement suitable for 6/12 luminaries systematically and its control gear boxes and lighting finial with integral power tool. The work also include design & casting of suitable foundation bolts with M-24 concrete for high mast considering the safe soil bearing capacity at site as 10T per sqmm at 2 mtrs depth. The foundation should be casted with foundation bolt manufactured with special steel along with nuts, washers, anchors plates and templates are required make: Bajaj/Philips or similar. The mast shall have one longitudinal weld and single dipping (hot dip galvanized) per section (as per specification attached).
4
153632
614528
Dismantling, relocating, refaxing, erection testing & commissioning of 12.5mtrs highmast system as 60 per site requirement to the satisfaction of Rly representative. Design /casting of shallow of mast //panel shall be with M-20 concrete .Considering safe soil bearing capacity at site as 10T/sqmtrs at 2 mtr depths Foundation, bolt nuts, washers, anchor plates, templates should be made of spl. Steel. Any alteration /modification shall be done as per site/tech. specification requirement to the satisfaction of railway
4
67800
271200
Supply and Fixing LED flood lights 250 W, outdoor type, Aluminum die cast housing, Instant Start, 61 operating voltage 90 V-300 V AC IP 65, minimum lumen of 13500 in 5700 or more color temperature with CRI more than 85 and PF more than .95 , life of complete fixture has to be minimum 50,000 burning hours at L70 lumen maintenance. THD should be less than 20 make Oreva, Pyrotech, Philips, Surya, Syska, CG, Osram, Gear, Bajaj and Havells or similar as per technical specification.
48
2372
113856
Supply and fixing of twin dome LED aviation light luminaires of BGAV 302 LED of Bajaj or similar comprising of aluminium housing with polycarbonate enclosure, (1 fitting per mast is necessary if no taller structures are in the vicinity). Fitting should be of reputed make.
8
3860
30880
Supply, fixing and commissioning of Switching Panel with electromechanical time switch with two 63 daily dial & two suitably rated contactors for operating 6/12X250 W LED flood lamps, suitable control gear for operation of lowering and lifting mechanism of 12.5 mtr mast necessary cable etc. for commissioning of the Mast as per detailed specification. All the accessories should be of reputed make and as per technical specification.
8
9139
73112
Supply and fixing/replacement of 1 HP 3 phase motor reversible, high powered power tool with operating mechanism, to be mounted in the base compartment of the high mast, coupled to the winch shall be supplied for raising and lowering of the luminaries carriage as optional item.
4
11650
46600
Supply and replacement of FRP PVC sheathed copper cable 5 core 2.5sqmm suitable for high mast
60
395
23700
Supply and fixing/replacement of stainless steel wire ropes with 316/304 grade or similar shall be of 7/19 construction and diameter of 6 mm. The end construction of the ropes to the winch drum shall be fitted with talurit end thimbles shall be secured on ropes by compression splices and bulldog grips as required.
260
245
63700
Supply and replacement of junction box for top of high mast size and other items should be same as exiting junction box.
4
1340
5360
Supply and fixing or replacement of The hot dip galvanized head frame as capping unit for high 69 mast shall be with close fitting guides and sleeves, three stops with PVC buffer for docking the luminaries carriage, cast aluminum pulley with stainless steel axel large enough to accommodate the stainless steel wire ropes and electric cable, canopy to cover the pulley's and with a provision to mount lighting finial.
1
17650
17650
Supply and fixing/replacement of galvanized Lantern carriage up to 12 luminaire for high mast tower
1
12350
12350
Providing SH rail post1.5/2.5mtrs long for safety of high mast. Work includes cutting of 50 or 60 or 71 90 lbs capacity rails in pieces of desired legth (1.5/2.5mtrs) digging of pit and erection of rail (Rail will be supplied by railway and is to be collected by contractor from concerned SSE).The rail pole shall be erected over a cement concrete bed (1:3:6) of 15 cm thickness and back filling of pit with excavated earth soil. The depth of the pit shall be 0.5 mtrs or as directed by site engineer. These rail pole should be grouted properly.
32
1079
34528
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements