North Western Railway Tender

All items of Road work appearing in chapter 16 of CPWD DSR ( Amended up to date )

All items of Sanitary Installations, Water Supply and Drainage appearing in chapter 17, 18 &19 of CPWD DSR ( Amended up to date )

All items of all other chapters except S.No. 1 to 5 mentioned above of CPWD DSR ( Amended up to date )

All items of Bridge Works -Misc. appearing in chapter 05 of IRUSSOR Items( Amended up to date )

IR for overhauling the filteration plant by removing, washing and refilling the same 1 material, same filteration media and recoupling the depliated by providing fresh and clean media upto the fill capacity including all labour, tool and plant including supplying and filling at contractor's cost . Nothing extra will be paid whatsoever the case may be.

Supply and apply 2 component, elastic, low viscous, solvent free polyurethane injection resin based system for permanent sealing that does not need the presence of water for hardening reaction rapid reaction. Project requirement, viscocity of misture< 100m Pas(at + 20 X). 2 Capable of penetrating cracks > 0.2 mm wide a CE conformity conformance lable that product is approved to the essential requirement and under market surveillance product Make SIKA, NORMET, CAC, BASK or Equivalent. 100% PAYMENT shall be released only after satisfactory completion of work 2.100% PAYMENT shall be released only after satisfactory completion of work (in all respect) plus 60 days

Providing and applying micro concrete for repair of small damaged patched in RCC structure. 2.100% PAYMENT shall be released only after satisfactory completion of work (in all respect) plus 60 days

Cleaning of surface to remove existing plaster (if any), dust and loosly adhering particles completely and repairing all Cracks & joints with polymer modified high strength mortar. Providing and laying waterproofing treatment by applying IZONIL Hard - 100% waterproof, breathable and drying, fiber reinforced ready to use plaster in two layer at an average thickness of 15 mm (7.5 + 4 7.5mm), sandwiched with 110 GSM glass fiber mesh as per manufacturers specification, in line and level and finished smooth. Prior to application of Izonil Hard, entire surface should be water cured and bring to SSD condition. For increased adhesion , it is recommended to apply a cement slurry coat on brick wall before izonil application. The IZONIL waterproofing system shall be cured for 5 to 7 days and curing should start within 5-6 hours of application. 2.100% PAYMENT shall be released only after satisfactory completion of work (in all respect) plus 60 days