National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 1,00,931Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Maintenance Of Security And Street Light Including Cables And Distribution Panels In Mmc-i For The Year 2024-25 (sh- Repair And Maintenance Of Distribution Panels Lt Feeders Junction Boxes 11 Kv/ 1.1 Kv Grade Cable Power Distribution Network Street L
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_831812_1Bid Award Id
ViewTender No
37/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
3.5 x 35 sq mm
20
693
13860
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL/ DWC/PVC pipe as required.
-
-
-
2 x 16 sq mm
1300
291
378300
2 x 25 sq mm
200
307
61400
3.5 x 35 sq mm
180
531
95580
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose /loop/ in panel for connections etc as required.
-
-
-
2 x 16 sq mm
400
280
112000
2 x 25 sq mm
50
296
14800
3.5 x 35 sq mm
90
521
46890
Supplying, Laying and fixing of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size on wall surface as required.
-
-
-
2 x 16 sq mm (clamped with 1mm thick saddle)
20
309
6180
2 x 25 sq mm (clamped with 1mm thick saddle)
10
325
3250
3.5 x 35 sq mm (clamped with 1mm thick saddle)
10
549
5490
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
15
2662
39930
Providing and laying in position cement concrete of specified grade, excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (1cement: 2 coarse sand (ZONE-III) derived from natural sources: 4 graded stone aggregate 20 mm nominal size) derived from natural sources.
1
7878
7878.5
Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)
16
8135
130160
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. [Make-Zenith/TATA/Jindal-hisar/Prakash- Surya]
-
-
-
32 mm dia
92
525
48300
40 mm dia
48
589
28272
Dismantling of metallic junction box of street/outdoor light poles fixed with nut bolts, clamps including credit for same etc as complete as required.
40
96
3840
Dismantling of non-metallic junction box of street/outdoor light poles fixed with nut bolts, clamps including credit for same etc as complete as required.
30
98
2940
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole/ wall including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
5
1477
7385
Supplying and fixing sheet steel Enclosure suitable for 125A TP&N MCCB , on surface/ recess, complete with neutral Link, powder painted including earthing etc. as required. (But without MCCB)
2
2336
4672
Supplying, installation, testing, commissioning & erection of 6 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos. 20 mm dia, 600 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1400 mm (200mm above ground and 1200 mm below ground) with steel reinforcement (Thermo-Mechanically Treated bars of grade Fe-500D or more) of horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation and refilling etc. as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket)
26
24031
624806
Supplying, installation, testing, commissioning & erection of 7 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos. 20 mm dia, 600 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 3 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet of 6 mm thick, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 450 mm x 450 mm x 1700 mm (200mm above ground and 1500 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more)horizontal tor bar stirrup 8mm dia @190c/c, verticle bars 4 nos, 12 mm dia including excavation and refilling etc. as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket)
1
27791
27791
Supplying and fixing of hot-dipped 1 metre galvanised M.S. single arm bracket made of 40 mm NB dia. GI pipe with a cap of 300 mm length and of suitable dia to mount on octagonal pole having a top of 70 mm A/F with nut bolts, etc., as required.
26
2773
72098
Supplying and fixing of hot-dipped 1 metre galvanised M.S. double arm bracket made of 40 mm NB dia. GI pipe with a cap of 300 mm length and of suitable dia to mount on octagonal pole having a top of 70 mm A/F with nut bolts, etc., as required.
1
3987
3987
Supply and installation of round bracket (ring type) suitable for mounting four floodlights. The round bracket should be made of 40 dia. (nominal bore) B-Class G.I. pipe on the periphery and four supports (spokes) of 40 mm B-Class G.I. pipe duly welded with a pole cap of 300 mm length at the centre. The pole cap should be of suitable dia for mounting on an existing polygonal pole with a top dia. of 70 mm. The dia. of the round bracket should not be less than 120 cm. The bracket pipes should be suitable for acting as conduits for wires for the wiring of floodlights. The pole cap should have four holes and four numbers of G.I. nuts and bolts for fixing the bracket on the top of the polygonal pole. (drawing will be get approved before fabrication )
1
4163
4163
Supply and drawing of following size PVC insulated, FRLS PVC sheathed copper conductor multi-core flexible cable into the existing street light pole/ PVC / DWC/ steel conduit/ loose, inclding making connections, etc. as required, including drawing out the burnt-out wires from the pole if required, etc. as required.
-
-
-
3 x 1.5 sq.mm
210
114
23940
3 x 2.5 sq.mm
20
167
3340
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
7472
14944
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
15
706
10590
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
10
244
2440
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
18
6855
123390
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required.
120
287
34440
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
2250
42
94500
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. confirming to IS 14930, part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
70
127
8890
90 mm dia (OD-90 mm & ID-76 mm nominal)
20
171
3420
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
40 mm dia (OD-40 mm & ID-32 mm nominal)
20
203
4060
63 mm dia (OD-63 mm & ID-51 mm nominal)
1300
247
321100
90 mm dia (OD-90 mm & ID-76 mm nominal)
200
292
58400
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.
-
-
-
Upto 35 sq. mm
150
200
30000
Above 35 sq. mm and upto 95 sq. mm
50
217
10850
Above 95 sq. mm and upto 185 sq. mm
50
234
11700
Above 185 sq. mm and upto 400 sq. mm
100
287
28700
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
Upto 35 sq. mm
40
37
1480
Above 35 sq. mm and upto 95 sq. mm
25
57
1425
Above 95 sq. mm and upto 185 sq. mm
20
77
1540
Above 185 sq. mm and upto 400 sq. mm
20
134
2680
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required
-
-
-
Upto 35 sq. mm
20
28
560
Above 35 sq. mm and upto 95 sq. mm
20
45
900
Above 95 sq. mm and upto 185 sq. mm
20
63
1260
Above 185 sq. mm and upto 400 sq. mm
20
115
2300
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required.
-
-
-
Upto 35 sq. mm (clamped with 1mm thick saddle)
50
55
2750
Above 35 sq. mm and upto 95 sq. mm (clamped with 25x3mm MS flat clamp)
10
130
1300
Above 95 sq. mm and upto 185 sq. mm (clamped with 25/40x3mm MS flat clamp)
10
153
1530
Above 185 sq. mm and upto 400 sq. mm (clamped with 40x3mm MS flat clamp)
10
226
2260
Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.
25
508
12700
The road crossings of power cable through trenchless boring.
Trenchless horizontal boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 200 mm dia DWC HDPE / G.I. /PVC PIPE
30
651
19530
The road crossings of power cable through trenchless boring.
Trenchless horizontal boring using Manual/ Machine Moling technique at 1.20 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 200 mm dia DWC HDPE / G.I. /PVC PIPE
10
1196
11960
Painting of street light pole following height, including painting of brackets, metal looping box, clamps, etc., fixed on the pole with two or more coats of aluminium paint of an approved brand and manufacture of the required color to give an even shade, including scraping, finishing the surface, applying a coat of red oxide, and finally numbering the pole with black and yellow synthetic enamel paint as per directions of the engineer-in-charge, etc., complete as required.
(Primer: Asian Paints, Berger, and Nerolac make Asian Paints 3 Mangoes Aluminium Paint or a similar from Berger or Nerolac.)
-
-
-
Pole height above ground above 5 metre and upto 7 metre.
50
753
37650
Pole height above ground above 7 metre and upto 9 metre.
10
900
9000
Pole height above ground above 9 metre and upto 12 metre.
5
1069
5345
Painting of panel boards, feeder pillars, junction box and cubical panel with 2 or more coats of synthetic enamel paint of an approved brand and manufacture of the required colour to give an even shade, including scrapping, finishing the surface etc., complete as required.
( Apcolite premium enamel paint of Asian paint or a similar of Berger or Nerolac).
100
161
16100
Supply, Installation, Testing and commissioning of outdoor type totally enclosed, dust and vermin proof, pedestal mounted INSPECTION BOX / JUNCTION BOX of a suitable size but not less than 600 mm wide X 450 mm height X 450 mm (deep) fabricated from 2 mm thick CRCA sheet steel having front and back openable doors with locking arrangement on both sides, tapered top (roof), including detachable cable gland plates made of 3 mm thick CRCA sheet, including pre-paint treatment, phosphating and powder coating by approved Siemens grey paint, consisting of 300 Amps 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC / SMC bus bar supports at required intervals, etc. as required, suitable for operation on 433 volts, 50 Hz, 3-phase, 4-wire A.C. supply system, the entire panel shall have one common G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs or terminals, a danger notice plate fixed, etc., complete as required. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground).
1
11956
11956
Supply, Installation, Testing and commissioning of outdoor type totally enclosed, dust and vermin proof, pedestal mounted INSPECTION BOX / JUNCTION BOX of a suitable size but not less than 600 mm wide X 600 mm height X 450 mm (deep) fabricated from 2 mm thick CRCA sheet steel having front and back openable doors with locking arrangement on both sides, tapered top (roof), including detachable cable gland plates made of 3 mm thick CRCA sheet, including pre-paint treatment, phosphating and powder coating by approved Siemens grey paint, consisting of 500 Amps 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC / SMC bus bar supports at required intervals, etc. as required, suitable for operation on 433 volts, 50 Hz, 3-phase, 4-wire A.C. supply system, the entire panel shall have one common G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs or terminals, a danger notice plate fixed, etc., complete as required. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground).
1
15918
15918
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 100 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand /Trinity Touch
132
3828
505296
Supplying and fixing PVC weatherproof 20 A, 240 V, Switch box, IP66, complete with one 20 A switch on surface or in recess, complete with connections, testing and commissioning etc. as required.
(Crabtree ACWCDIW201 /Hensel / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
1
3012
3012
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
20
133
2674
Supplying and fixing PVC weatherproof, IP66, 16 A, 240 V, switch and Socket box, IP66, complete with one 16 A switch and socket on surface or in recess, complete with connections, testing and commissioning etc. as required. (Crabtree ACWCKXW163/ Hensel / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
1
3391
3391
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on surface or recess, including connections etc., complete as required. ( Hensel KF 1600G/ Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
5
1979
9895
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on surface or recess, including connections etc., complete as required. (Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
5
3000
15000
Supplying and fixing Cable Junction Boxes, IP 66 weatherproof, size 155 mm x 210 mm x 92 mm with 5 Nos two-way terminals mounted on DIN rail suitable for termination of 16 sq mm cable, on the surface or in recess, complete, etc. as required.) (Make Hensel KF 1616G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO/SCHNEIDER )
5
3040
15200
Supplying and fixing Cable Junction Boxes, IP 66 weatherproof, with 5 Nos two-way terminals mounted on DIN rail suitable for termination of 4 sq mm cable, on the surface or in recess, complete, etc. as required.) (Make Hensel KF 0404G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO/SCHNEIDER )
2
1010
2020
Supplying and fixing feed through terminal 100 A in the existing looping box/junction box, including connection, etc., as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
20
63
1260
Supplying and fixing feed through terminal 75 A in the existing looping box/junction box, including connection, etc., as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
20
41
820
Supplying and fixing shorting link suitable for 75 A feed through terminals in existing looping box/junction box, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
10
19
190
Supplying and fixing shorting link suitable for 100 A feed through terminals in existing looping box/junction box, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
10
22
220
Supplying and fixing end plates for 75A feed through terminals in existing looping boxes/ junction boxes, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
4
10
40
Supplying and fixing end plates for 100A feed through terminals in existing looping boxes/ junction boxes, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
4
10
40
Supplying and fixing End Clamps for feed-through terminals on the existing DIN rail in the existing looping box/ junction boxes, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
8
10
80
Supplying and fixing din rail mounted earth terminal suitable for 4 sq mm wire in the existing looping box/junction box, including connection, etc., as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)
30
70
2100
Supplying and fixing a PVC cable gland suitable for up to 6 sq mm of copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required. (Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand)
4
22
88
Supplying and fixing a PVC cable gland suitable for 2 x 10/ 16 sq mm armoured XLPE cable in the existing polycarbonate cable junction box, including connections, etc. as required. (Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand/Trinity Touch)
4
52
208
Supplying and fixing a PVC cable gland suitable for 2 x 25 sq mm armoured XLPE cable in the existing polycarbonate cable junction box, including connections, etc. as required. (Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand/Trinity Touch)
4
69
276
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63 A
1
2872
2872
Location, tracing and pin-pointing of faults in existing 1.1 KV and 11KV grade underground cables, including disconnection of the cable at both ends, finding the route of the cable, excavation at the fault point to make the fault point visible, making temporary joints ( in case of LT cable), testing the cable on load for three hours, including refilling the excavated trench and cleaning the site, etc. as required. [Permanent joints are paid separately ].
16
9985
159760
Removing of following size old defective armoured PVC insulated and PVC sheathed / XLPE power cable from exisitng RCC/ HUME /METAL/ cable entry pipe of the pole collar/ foundation etc. as required. i) upto 35 sq mm
30
44
1320
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc. as required
( Zenith/TATA/Jindal-hisar/Prakash- Surya make)
-
-
-
50 mm dia nominal bore
10
762
7621.5
80 mm dia nominal bore
6
1041
6250.2
100 mm dia
6
1806
10836
150 mm dia nominal bore
6
2740
16440
Supplying and laying of G.I. pipe of 50 mm dia.(nominal), medium class, ISI marked in wall / floor including cutting chase, and making good the wall/ floor and finishing with matching surface after housing G.I. pipe in chase. ( for protection of UG cable)
6
837
5022
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
20
585
11700
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)
2
2434
4868.5
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
4
1503
6014.4
Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set, panel etc including form work etc as required.
0.2
7878
1575.7
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
0.5
8340
4170.43
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
-
-
-
Bituminous portion
2
5032
10064.5
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.
All kinds of soil.
5
260
1301.5
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and for all lift.
5
196
980
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in the ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering, including dismantling of the existing underground cable of size 2 x 16 sq mm cable laid in the trench and credit for same etc., complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
110
227
24970
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 11 KV (Earthed) grade Conforming to IS 7098 (Part-2) with upto date amendments of following size in the existing masonry open duct as required.
-
-
-
3 x 120 sq. mm
9
2261
20349
3 x 150 sq. mm
9
2699
24291
3 x 185 sq. mm
9
3058
27522
3 x 240 sq. mm
9
3676
33084
3 x 300 sq. mm
9
4322
38898
Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. [Make-Raychem/3M/M-seal]
-
-
-
2 X 16 sq. mm
10
2168
21680
2 X 25 sq. mm
5
2478
12390
3½ X 35 sq. mm
15
2478
37170
3½ X 50 sq. mm
5
2478
12390
3½ X 70 sq. mm
10
3363
33630
3½ X 95 sq. mm
5
3517
17585
3½ X 120 sq. mm
10
4538
45380
3½ X 150 sq. mm
5
4538
22690
3½ X 185 sq. mm
5
4538
22690
3½ X 240 sq. mm
10
4919
49190
3½ X 300 sq. mm
5
6107
30535
3½ X 400 sq. mm
5
7966
39830
Supplying and making straight through cable jointing with heat shrinkable jointing kit complete with all accessories including ferrules suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
-
-
-
240 sq. mm
3
41892
125676
300 sq. mm
3
41892
125676
Supply, installation, testing, and commissioning of 10 watt/metre or 120 LED per metre, LED rope light, IP 65 rating, with driver/adopter in various colors on wall/building/ terrace including connections and testing, etc. as required.
Phillips /havells /Wipro
500
147
73500
Supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required
-
-
-
240 sq. mm
1
16249
16249
300 sq. mm
1
16249
16249
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required :
-
-
-
240 sq. mm
1
22795
22795
300 sq. mm
1
22795
22795
Fabrications, supplying and fixing of covers of the required shape and size in the existing electrical cubical panel boards/distribution boards/ feeder pillars /pole box at different locations made out from 2 mm thick CRCA sheet with locking arrangement, hinges and matching with the existing doors of the panel including painting with an approved shade of two coats of synthetic enamel paint over an undercoat of steel primer etc., complete as required.
2
7063
14126
Providing and installing a heavy-duty 3-inch weld on Barrel metal Hinge on the doors of existing Indoor/Outdoor LT-panel/Feeder Doors by means of welding and painting the entire weld-affected surface with 2 or more coats of synthetic enamel paint after 1 coat of red oxide to match the finishing of the weld-affected area to the adjacent surface, etc., as required.
50
166
8300
Providing and fixing universal type SS door lock mechanism for existing Indoor/Outdoor LT-panel/Feeder Doors including making holes, ensuring its tight placement without any free-play by way of suitable rubber/solvent seals etc as required
50
102
5100
Providing & fixing 3 mm thick CRCA gland plate of required size, duly treated and painted, in existing indoor/outdoor LT panel/feeder/Junction feeder box and making necessary holes in the gland plate for management of the existing cables in the panel/feeder, including taking out the existing gland, lugs, cables and re-fixing etc., as required. [Lugs/Thimbles or glands, if required, will be paid separately]
0.5
4659
2329.5
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. [Make-Comet/Hex/Dowells/Jainson]
-
-
-
2 X 16 sq. mm (22mm)
10
256
2560
2 X 25 sq. mm (22mm)
5
259
1295
3½ X 35 sq. mm (32mm)
5
369
1845
3½ X 50 sq. mm (35mm)
2
413
826
3½ X 70 sq. mm (38mm)
4
468
1872
3½ X 95 sq. mm (45mm)
1
588
588
3½ X 120 sq. mm (45mm)
2
613
1226
3½ X 150 sq. mm (50mm)
2
697
1394
3½ X 185 sq. mm (57mm)
2
875
1750
3½ X 240 sq. mm (62mm)
2
1027
2054
3½ X 300 sq. mm (70mm)
2
1195
2390
3½ X 400 sq. mm (82mm)
2
1556
3112
Supplying and embedding following size PVC conduit (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.
-
-
-
32 mm dia.
20
120
2400
50 mm dia.
15
190
2850
Providing and erection of G.I. pipe medium class of the following diameter in the existing gate pillar for fixing the post-top lantern, including making holes and embedding the required length of the pipe in the pillar top, and making good the damage with matching concrete, plastering, and painting after the erection of the pipe, etc., complete as per the direction of the engineer-in-charge.
-
-
-
G.I. pipe 50 mm dia
4
718
2872
G.I. pipe 65 mm dia
4
884
3536
Supply, installation, testing and commissioning of 25 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
3
7134
21402
Supply, installation, testing and commissioning of 45 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required.
2
10103
20206
Supplying, installation, testing, and commissioning of 10 to 11 Watt, .06 Metre (nominal size) LED Bollard Light fitting complete with LED module, electronic driver, diffuser, and all other accessories, minimum system luminous efficacy of 80 lm/W, the bollard housing should be made up of metallic pipe duly powder coated with the mounting flange at the bottom, including providing 3 nos foundation bolts, two numbers 32 mm. dia PVC pipe for cable entry (from the bottom of the foundation to the top of the foundation for cable entry), and providing the foundation of Cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size ) of size 0.3-metre dia and 750 mm height (250mm above ground and 500 mm below ground) including excavation as required and complete with connections, lugs, terminals, connectors for the connection of cable and wires in the fitting etc., complete as required.
3
8385
25155
Supplying, installation testing, and commissioning 100 W highbay LED luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium alloy housing, including installation of luminaire on the ceiling, including connections, earthing, providing fixing fasteners, etc., as required. The fixture should have a minimum system efficacy of 140 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK = 7. The fixture driver should have an operating voltage range of 140–270 V, surge protection of ≥ 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havells, Wipro, and Bajaj, TRILUX)
2
11494
22988
Supplying, installation, testing and commissioning of 45 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 120 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
48
4774
229152
Supplying, installation, testing and commissioning of 70 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 120 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
5
6345
31725
Supplying, installation, testing and commissioning of 90 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 120 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 54 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
5
10172
50860
Supplying, installation, testing and commissioning of 150 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 120 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 54 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
3
13979
41937
Supplying, installation, testing, and commissioning following rating LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlight, on-wall or existing street light pole bracket and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 120 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of ≥ 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havells, Lighting Technology, TRILUX and Bajaj)
-
-
-
150 watt flood light
4
9938
39752
Supply, installation, testing, and commissioning of 15-watt IP 66 LED UP-down wall Luminaire with driver in aluminium housing, complete with connection, etc., as required
4
5206
20824
Supply, installation, testing, and commissioning of 6-watt IP 67 GROUND BURIAL luminaire in diecast aluminium housing and stainless steel trim, driver, complete with connection, etc., as required. (Philips / Jaquar /Wipro /LT/ Havells)
5
4034
20170
Supply, installation, testing, and commissioning of outdoor type 3-watt IP 65 LED foot light/ step light in Die cast aluminium housing and Polycarbonate diffuser, complete with connection, etc., as required. (Jaquar LFTL01S003XW or similar in Philips / Wipro /LT/ Havells
5
786
3930
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB/Panel board complete with connections, testing and commissioning etc. as required
-
-
-
40 amps, DP MCB
1
1213
1213
63 amps, DP MCB
1
1213
1213
40 amps, TP&N MCB
1
2324
2324
63 amps, TP&N MCB
1
2324
2324
Providing and fixing Din-rail 35 mm on existing panel etc., as require
1
378
378
Supplying and fixing 2 way, 60 Amp, two way connectors on the existing looping box / Panel board including connection etc as required.
15
107
1605
Providing and fixing G.I. reducer on existing street light pole bracket of size 60 mm x 50 mm with nut and bolts for fixing. (As per sample provided by the department)
2
398
796
Supplying and fixing Bakelite Sheet of following size with screw in the existing looping box/ Panel board including cutting the sheet to required shape and size complete etc as reqd.
-
-
-
6 mm thick
0.5
4317
2158.5
12 mm thick
0.5
7432
3716
Supplying and fixing 300 Amps capacity aluminium bus bar having nominal current density 130 Amp/sq. cm in the existing panel complete with bus bar supports and insulated by means of PVC sleeves and holes for connections etc as required.
8
588
4704
Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight(Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required.
-
-
-
1 output per phase and suitable for single phase supply
1
4389
4389
Providing and fixing 63 Amps , TP, MCCB, 35 KA breaking capacity , Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection, Spreaders Terminals in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
1
9914
9914
Providing and fixing 3 Pole, 415 V, Power Contactor AC3 duty Rating 40 A. in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
1
4416
4416
Supplying and fixing following way, single pole and neutral, PVC Weatherproof IP65, MCB distribution board, 240 volts, on surface/ recess, complete with din bar etc. as required. (But without MCB/RCCB/Isolator). (Make Hensel Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON / OBO /SCHNEIDER)
-
-
-
4 module MCB DB
1
2538
2538
8 module MCB DB
2
3406
6812
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
2
256
512
Double pole
2
656
1312
Supplying and fixing din rail mounted disconnecting Terminal with end palte suitable for 6 sq mm wire in the existing looping box/junction box, including connection, etc., as required.
5
73
365
Credit for dismantled aluminium conductor XLPE insulated and PVC sheathed UG cable of 1.1KV grade and 6 SWG G.I.wires laid along the cable of following sizes.
-
-
-
2 x 16 sq. mm
500
-28
-14000
2 x 25 sq. mm
200
-33
-6600
3.5 x 35 sq. mm
20
-58
-1160
3.5 x 50 sq. mm
10
-74
-740
3.5 x 70 sq. mm
10
-94
-940
3.5 x 95 sq. mm
10
-118
-1180
3.5 x 120 sq. mm
10
-140
-1400
3.5 x 150 sq. mm
10
-165
-1650
3.5 x 185 sq. mm
10
-201
-2010
3.5 x 240 sq. mm
10
-248
-2480
3.5 x 300 sq. mm
20
-300
-6000
3.5 x 400 sq. mm
10
-371
-3710
Credit for unserviceable damaged street light pole and fitting MS/ G.I. pipes dismantled during the execution of the work.
500
-35
-17500
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 17,83,669/-
1
17836
17836.69
Add Difference in GST of (18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 17,83,669/- (DSR) + 17,836.69 (L/Cess) = 18,01,505.69/-
1
114035
114035.31
Less COST INDEX on DSR(E) @ -2.73 % i.e Rs. 17,83,669/- (DSR) + 17,836.69 (L/Cess) + Rs. 1,14,035.31(GST difference) = Rs. 19,15,541/-
1
-52294
-52294.27
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 17,83,669/- (DSR) + 17,836.69(L/Cess) + Rs. 1,14,035.31 (GST difference) + 53,399.23/- (DSR Civil) - 52,294.27 (Correction) = Rs. 19,16,645.96/-
1
-51749
-51749.44
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements