National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 2,88,530Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_827144_1Bid Award Id
ViewTender No
28/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
4
31514
7878.5
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
21.05
137216
6518.6
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
270
202311
749.3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
26.66
241159
9045.75
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
4
43411
10852.95
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
25.2
9882
392.15
Shelves (Cast in situ)
10
9272
927.25
Lintels, beams, plinth beams, girders, bressumers and cantilevers
10.8
7953
736.4
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
20
4171
208.55
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3000
323550
107.85
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6(1 cement :6 coarse sand)
15.6
111263
7132.25
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6(1 cement : 6 coarse sand)
5.98
54453
9105.95
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window/door sills, jambs facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqnn
37.8
204630
5413.5
Area of slab over 0.50 sqm
4
20545
5136.3
Providing and fixing 1st quality Ceramic glazed wall tiles of size 600x300 mm conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
498
631439
1267.95
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
44.1
105515
2392.65
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
300x16 mm
21
6368
303.25
250x16 mm
27
7036
260.6
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10 mm
42
4836
115.15
150x10 mm
54
4457
82.55
100x10 mm
42
2717
64.7
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
125 mm
180
11925
66.25
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
Single rubber stopper
21
831
39.6
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
135
77078
570.95
Providing and fixing to existing door frames.
-
-
-
30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames.
45.36
168773
3720.75
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
1000
133700
133.7
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
5000
972000
194.4
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
-
-
-
Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides
69.75
79065
1133.55
Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
Glazed vitrified floor tiles polished finish of size
-
-
-
Size of Tile 600 x 600 mm
570
856567
1502.75
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
Size of Tile 600 x 600 mm
85.7
125537
1464.85
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent
10
44813
4481.3
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
206
77744
377.4
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
108
14704
136.15
Single tee with door
-
-
-
110x110x110 mm
54
12644
234.15
Single tee without door
-
-
-
110x110x110 mm
81
17929
221.35
Bend 87.5°
-
-
-
110 mm bend
135
20297
150.35
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
30
11139
371.3
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
20
1094
54.7
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams or more per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
1021
754161
738.65
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram or more per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500- 600mm)
90
47911
532.35
Flashings/ Aprons.( Upto 600 mm)
180
87408
485.6
12 mm cement plaster of mix: (including all height)
-
-
-
1:6 (1 cement: 6 coarse sand)
1200
412380
343.65
15 mm cement plaster on rough side of single or half brick wall of mix: (including all height)
-
-
-
1:6(1 cement: 6 coarse sand)
800
316280
395.35
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (including all height)
-
-
-
New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
4800
821280
171.1
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (including all height)
-
-
-
Two or more coats on new work
50
7795
155.9
Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (including all height)
3000
75450
25.15
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: (including all height)
-
-
-
One or more coats on old work
600
61680
102.8
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. (including all height)
-
-
-
With cement mortar 1:4 (1cement: 4 coarse sand)
100
56050
560.5
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge.
-
-
-
Long pattern W.C Pan of size 580x440 mm
23
80539
3501.7
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall
100
325
3.25
Demolishing cement concrete manually/ by mechanical means including disposal of material within NSG camp as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
4
6014
1503.6
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within NSG camp as per direction of Engineer-in-charge.
-
-
-
In cement mortar
3
6180
2060.2
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within NSG camp :
-
-
-
Of area 3 sq. metres and below
69
9901
143.5
Dismantling tile work in floors and roofs laid in cement mortar including stacking material within NSG camp as per direction of Engineer-in-charge.
-
-
-
For thickness of tiles 10 mm to 25 mm
100
7340
73.4
Demolishing mud phaska in terracing and disposal of material within NSG camp as per direction of Engineer-in-charge.
114.95
105098
914.3
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within NSG camp as per direction of Engineer-in-charge.:
-
-
-
Asbestos Cement sheet
900
69570
77.3
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within NSG camp as per direction of Engineer-in-charge :
-
-
-
100 mm dia pipe
50
3900
78
Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within NSG camp as per direction of Engineer-in-charge:
-
-
-
Up to 150 mm diameter
80
26592
332.4
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within NSG camp as per direction of Engineer-in-charge.
1700
92905
54.65
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
21
46753
2226.35
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink without drain board
-
-
-
610x510 mm bowl depth 200 mm
5
24704
4940.8
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
40 mm dia
50
5835
116.7
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
25
34045
1361.8
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
30
21268
708.95
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
1
18212
18212.9
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
20 mm nominal dia Pipes
100
53760
537.6
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
-
-
-
20 mm dia nominal bore
100
43730
437.3
25 mm dia nominal bore
50
27585
551.7
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
5
3112
622.4
20 mm nominal bore
5
2699
539.95
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
20 mm nominal bore
10
4625
462.5
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
15 mm nominal bore
50
4887
97.75
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
20 mm nominal bore
5
1734
346.8
25 mm nominal bore
5
2196
439.25
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
30
15204
506.8
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
30
23968
798.95
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
22
14749
670.45
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
60
34458
574.3
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
50
3740
74.8
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
100 mm nominal dia
20
752
37.6
125 mm nominal dia with 25 mm waste hole
50
2592
51.85
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
3
38311
12770.55
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
799
424189
530.9
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
465
295019
634.45
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
74.25
111764
1505.25
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
383.16
645471
1684.6
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
480
888984
1852.05
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect.
-
-
-
SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
40
5648
141.2
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
-
-
-
25 mm average thickness in 2 layers.
40
23494
587.35
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
-
-
-
18 mm thick
43.5
130191
2992.9
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately)
-
-
-
6 mm thick
12
13192
1099.35
Providing and fixing white vitreous china table top/counter top wash basin of catagery JDS-WHM-25907N of Jaquar make or equavalent series of make , hindware, Parryware with 32mm CP Brass Waste of standard pattern including making all connections : Italian collection as per direction of engineer in charge Table Top Basin, In White Matt of Size: 530x420x140 mm, Shape - Rectangular as per direction of engineer in charge all complete
5
44616
8923.27
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of Size: 370x665x750 mm of catagery CNS-WHT-853S220SPPSM of Jaquar make or equavalent series of make , hindware, Parryware including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
2
38798
19399.24
Providing and fixing single lever Basin mixture of catagery KUP-35005BPM of Jaquar make or equavalent series of make , hindware, Parryware including painting of fittings and brackets, cutting and making good the walls wherever required:-
5
39151
7830.22
Providing and fixing Pressmatic valve of approved quality conforming to IS standards and weighing not less than 500 gms.
5
6081
1216.33
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, and C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia other couplings in C.P. brass, including cutting and making good the walls and floors wherever required.
5
19451
3890.37
Providing and fixing C.P. brass angle valve With Wall Flange for basin mixer and geyser points of catagery FON-40053 of Jaquar make or equavalent series of make , hindware, Parryware, Euronics 15mm nominal bore
6
7048
1174.8
Providing and fixing C.P. brass bib cock With Wall Flange of catagery FON-40037 of Jaquar make or equavalent series of make , hindware, Parryware, Euronics 15mm nominal bore
2
3705
1852.52
Providing and fixing Single Lever 3-inlet Diverter Exposed parts kit Consisting of Operating Lever, Cartridge Sleeve, Wall Flange (with Seals), Button Assembly Sleeve and Button Cap of catagery FON-40193NK (Compatible with ALD-193N) and Concealed Body for 3-Inlet Single Lever Diverter with Button Assembly of catagery ALD-193N of Jaquar make or equavalent series of make Euronics, hindware, Parryware, Euronics including painting of fittings and brackets, cutting and making good the walls wherever required all complete, as per direction of engineer in charge
1
6528
6528
Providing and fixing CP Health Faucet (ABS Body) with 8mm Dia, 1.0 Meter Long Spirochrome flex tube & Wall Hook of catagery ALD-587 of Jaquar make or equavalent series of make Euronics, hindware, Parryware, all complete, as per direction of engineer in charge
1
1087
1087.13
Providing and fixing Hand Shower 105mm Round Shape Single Flow with Air Effect (ABS Body & Face Plate Chrome Plated) with Rubit Cleaning System of catagery HSH-1717 Easy Flex Tube in Chrome Finish 1.5m Long with Nuts of catagery SHA-571 & Premium Wall Bracket for Hand Shower, 35mm dia. & 100mm Long Round Shape of catagery SHA-555 of Jaquar make or equavalent series of make Euronics, hindware, Parryware, Euronics all complete, as per direction of engineer in charge
1
3945
3945.67
Providing and fixing Toilet paper/ Roll Holder with Stainless Steel Flap of catagery ACN-1153S of Jaquar make or equavalent series of make Euronics, hindware, Parryware all complete, as per direction of engineer in charge
1
1299
1299.89
Providing and fixing Towel Rack 600mm Long with Lower Hangers, Stainless Steel of catagery ACN-1181S of Jaquar make or equavalent series of make , hindware, Parryware, Euronics all complete, as per direction of engineer in charge
1
3067
3067.61
Providing and placing in position up to floor five level micro concrete of approved brand and manufacturer which shall be cement based prepacked single component chloride free, no shrink, free from self compacting, ready to use after mixing water in soecified proportion as per manufacturer specification and direction of engineer-in-charge (payment under this item shall be made only after prepare wet curing has been done and surface has been satisfactroly evaluted by sundries/taping with blunt a metallic instrument)
0.5
19654
39308
Providing and fixing GI chicken wire mess at junction of brick work and RCC work including screw /nails etc complete. (Including height up to 10.0 Meter)
20
2799
139.98
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately): 25mm thick Double leaf
52.48
187737
3577.31
Cost of DSR items = Rs. 1,08,07,873.45 'A'. Deduct GST Factor on DSR-2023 Items @ total of DSR rates - 0.973 of DSR rates) i.e 1,08,07,873.45 - 0.973 A = Rs. 2,91,812.58
1
-291812
-291812.58
Electrical
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
5
5075
1015
Group B ( Barrack)
157
185574
1182
Group C (Office, MT Line, )
5
7335
1467
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
5
7810
1562
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
-
-
-
Group A
5
2870
574
Group B ( Barrack)
44
28028
637
Group C ( Office, MT Line)
10
8940
894
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group B ( Barrack)
5
3245
649
Group C ( Office, MT Line)
3
2574
858
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
550
183700
334
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
100
53700
537
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
150
34950
233
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
10
4390
439
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
110
62700
570
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
10
10050
1005
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
1 x 1.5 sq. mm
10
450
45
3 X 1.5 Sq.mm
60
5700
95
3 x4 Sq.mm
20
4120
206
6 x4 Sq.mm
20
7920
396
3 X 6 Sq.mm
10
3040
304
3 X 10 Sq.mm
10
4360
436
2 X 10 + 1 X 6 Sq.mm
50
19500
390
4 X 10 + 2 X 6 Sq.mm
10
7540
754
1 x 4 Sq.mm
10
850
85
Providing and fixing Din-rail 35 mm x 7.5 mm on exisitng panel etc., as required. i) Din-rail 35 mm x 7.5 mm
1
378
378
Supplying and fixing of S.S./G.I Saddles 23 mm x 1.5 mm on following size PVC / steel conduit/ cable / pipe etc as reqd. (Astral, Prayag, Ashirvad, Finolex, or as approved by the engineer-in-charge)
i) 50 mm
10
380
38
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
20
2560
128
25 mm
20
2900
145
50 mm
5
1420
284
Supplying and installing the following size PVC trunking cable management system, complete with front cover, internal/external/flat angles, joints, junctions, end caps, and finishing accessories, etc. as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
100 x 50
5
7720
1544
32 X 16
5
1550
310
Supplying and fixing of following sizes module frame on existing trunking including arranging the cover making good the same as original complete etc. as required.
(Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
1-3 Module Frame
2
400
200
4-5 Module Frame
2
478
239
8 Module Frame
2
776
388
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
20
11840
592
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Bends" with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
5
7205
1441
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee " with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
5
7400
1480
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
20
13380
669
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
5
5795
1159
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mmX75mm)
20
5960
298
3 Module (100mmX75mm)
5
1635
327
4 Module (125mmX75mm
5
1715
343
6 Module (200mmX75mm)
5
2010
402
8 Module (125mmX125mm)
5
2270
454
12 Module (200mmX150mm)
5
2735
547
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amp switch
51
5253
103
15/16 amp switch
50
7800
156
3 pin 5/6 A socket outlet
5
610
122
6 pin 15/16 A socket outlet
5
985
197
Bell push
5
700
140
RJ45/ LAN Socket
10
2920
292
Supplying and fixing two module stepped type electronic modular fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
20
7380
369
Supplying and fixing two module stepped type electronic piano fan regulator on the existing phenolic cover plate switch box including connections but excluding cover plate etc. as required.
5
1665
333
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
-
-
-
5/6 amps switch
5
260
52
15/16 A switch
2
242
121
3 pin 5/6 A socket outlet
2
138
69
6 pin 15/16 A socket outlet
2
274
137
Supply & Fixing suitable size GI Box with modular plate and cover in front on surface or in reccess including provising and fixing 6 pin 5/6 and 15/16 amps moduler socket outlet and 15/16 amps moduler switch connection ect. as required.
53
31058
586
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
21
14280
680
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
28
13356
477
Supplying and fixing suitable size GI/ PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 6 pin 15/16 A modular socket outlet and 2 nos. 15/16 A modular switch, connections etc. as required.
5
4875
975
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
20
1740
87
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
5
665
133
3 Module
5
755
151
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
20
800
40
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, “C” curve including connections, painting etc. as required.
45
32715
727
Providing and fixing a metallic louvred shutter suitable for following sizes exhaust fan, the louvres should be able to open when the fan is on and close when the fan is turned off, on the existing opening on the wall, etc., as required.
-
-
-
300 mm
1
809
809
380 mm
1
1034
1034
450 mm
1
1331
1331
Providing and fixing 3 mm thick PVC/ phenolic laminated round sheet cover with a minimum of 170 mm dia on the existing fan box with two screws, etc., as required.
35
1050
30
Providing and fixing 3 mm thick PVC / phenolic laminated round sheet cover on the existing junction box with two screws, etc., as required.
60
660
11
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
21
2310
110
Supplying and fixing suitable size GI box in recess, including providing and fixing of 3/4 Module LED Foot light / skirting light, including connection etc. as required.
1
881
881
Supplying and fixing two module Buzzer on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
654
327
Supplying and fixing two module bell/ chime on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
1018
509
Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
230
46
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
260
52
Supplying and fixing PRCD (Portable Residual Current Device) Plug top, 16 A 30 mA rating including connection etc. as required.
5
3880
776
Supplying and fixing Plug top following rating including connection etc. as required.
-
-
-
16 A 3/6 Pin Socket
2
246
123
6 A 3/6 Pin Socket
2
200
100
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
1
563
563.9
Supplying and fixing of following size PVC Saddles with base and screws on existing PVC / steel conduit etc as reqd (Precision / AKG /Polycab /Finolex / Anchor/ GM)
-
-
-
20 mm
1
16
16
25 mm
1
17
17
Supplying and fixing of 23 mm x 1.5 mm S.S./G.I. saddles on the following sizes of existing PVC or steel conduit, cable, pipe, etc., as required (Astral, Prayag, Ashirvad, Finolex, or as approved by the engineer-in-charge)
-
-
-
50 mm
1
38
38
Supplying and fixing 2 way, 60 Amp, two way connectors on the existing looping box including connection etc as required.
1
107
107
Supplying and fixing Bakelite Sheet of following size with screw in the existing looping box/ panel including cutting the sheet to required shape and size complete etc as reqd.
-
-
-
6 mm thick
0.5
1829
3659
Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Ventil Air or with similar specifications C&G / Orient / Usha / Almonard)
4
9140
2285
Supplying and installation of following sweep, 1400 RPM heavy-duty, single phase, metallic exhaust fan Conforming to IS:2312 -1967 in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Turbo force Heavy Duty Exhaust Fan or with similar specifications C&G / Orient / Usha / Almonard)
-
-
-
300 mm sweep
21
106470
5070
380 mm sweep
1
6010
6010
Supplying and installation of PVC Exhaust fan with louver shutter 200 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc as required.
(Havells / C&G / Orient / Usha / Almonard)
25
57050
2282
Supplying and installation of PVC Exhaust fan with louver shutter 250 mm sweep in the existing opening, including making good the damage, connection, testing, commissioning etc as required.
(Havells / C&G / Orient / Usha / Almonard/ Atomberg)
1
2433
2433
Making holes of the required size and shape in a brick masonry wall for installation of the following size exhaust fan, including making good the wall by plastering and finishing with the matching surface, etc., complete as per the direction of the engineer-in-charge.
-
-
-
225 mm /230 mm sweep
4
552
138
200 mm sweep.
1
136
136
250 mm sweep.
1
192
192
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe and making good the same etc. complete as per direction of Engineer-in-charge.
21
15624
744
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 400 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
2
1252
626
Supply and installation of following sweep size, 220 V, wall mounted fan along with speed regulator unit for speed control, on the existing wall, including connection, testing, commissioning etc. as required. (Make: Atomberg /Crompton/Havells/Orient/Usha/Bajaj/ Almonard)
-
-
-
400 mm sweep
2
6244
3122
Cutting a hole of the required size and shape on the window or ventilator glass pane for the installation of an exhaust fan of size up to 150 mm sweep, etc., complete as per the direction of the engineer-in-charge.
1
118
118
Supply, installation, testing and commissioning of surface mounted LED downlighter luminaire in metallic housing, with a minimum system lumen output of 1500 lumen and with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required.
1
2433
2433
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty of Atomberg/ Usha/ Orient / Havells / Bajaj/ Crompton make)
37
124764
3372
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6, Air delivery minimum 170 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty)
1
3314
3314
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED recessed Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, suitable for recessed mounting, Armstrong/grid/POP/GB ceiling complete with all accessories, diffuser and electronic driver, directly on the ceiling, including connections and earthing etc. as required.
1
3568
3568
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
62
53196
858
Supply, installation, testing, and commissioning of LED bulkhead fittings with IP 66 ingress protection, with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature of 5500K–6500 K, average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser, electronic driver, etc. as required directly on the wall, including connections, etc. as required
21
35070
1670
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
25
15575
623
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED Surface Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling, including connections, earthing, etc. as required.
1
4339
4339
Supply, installation, testing and commissioning of 45 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Cool White Or Warm White as per direction of Engineer-In-Charge.
Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
20
202060
10103
Supply, installation, testing and commissioning of wall-mounted light fixture complete with B22/ E27 base, metal base in Nickel / Brass finishing with diffuser and 9 watts LED blub etc., as required directly on the wall, including connections etc. as required. ( Havells FLORETINE WL 1 LS or similar in Wipro/Philips/Jaquar/LT as approved by the Engineer -in- charge)
21
26292
1252
Supplying & Fixing of 2 to 4 watt LED wall light as bed light etc required as per direction of engg-in-charge.
1
1284
1284
Supplying, installation, testing, and commissioning 100 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)
1
7375
7375
Supply, installation, testing and commissioning of 10 wattTrack Mounted Warm White LED light, IP 43, with Pressure Die-cast aluminium housing and complete with PC diffuser, LED module, electronic driver and all other accessories, having PF 0.9, THD15%, CRI80 minimum system luminous efficacy of 90 lm/W, on existing street light pole/gate including connection etc. as required. Make:- Havells, UNECOTRACKLIGHTTS10WLED830S15WHT
5
10985
2197
Supplying, installation testing and commissioning of BEE 5 star rating, 15 litres capacity water storage heater, with protection against over heating, Multifunction Safety Valve and external adjustable thermostat, with 16 A, 240 V, plug top and 02 nos flexible connection pipe suitable for working with 230V AC, 50 Hz, 1 Phase supply etc as required. (Make: Havells / Crompton/ AO Smith /Racold /Jaguar with 7 year warranty on inner tank, 3 year warranty on heating element, 2 year comprehensive Warranty)
1
13980
13980
Supplying, instalaltion, testing, and commissioning 200 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)
2
26360
13180
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on surface or recess, complete with the following accessories fixed in, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 75 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 1600G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
5
13005
2601
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
150
38400
256
Double pole
23
15088
656
Triple pole
2
2014
1007
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
130
13
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
1
4091
4091
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
1
1080
1080
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
(Note : DB should be suitable for RCCB/RCBO as incomer.)
-
-
-
8 way , Double door
23
59179
2573
16 way , Double door
1
3141
3141
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required
-
-
-
For 8 way, Double door SPN MCBDB
23
19136
832
For 14/16 way, Double door SPN MCBDB
1
902
902
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
1
1621
1621
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
100 A, 16 KA/18KA/ 25KA, TPMCCB
2
7554
3777
100 A,30KA,FPMCCB
2
15446
7723
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
1
1592
1592
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
40 A Double pole
1
1213
1213
63 A Double pole
1
1213
1213
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A Triple pole and neutral
1
2324
2324
63 A Triple pole and neutral
1
2324
2324
Fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 to 16 way, Double door
1
508
508
Supplying and fixing PVC weatherproof, IP66, 16 A, 240 V, switch and Socket box, IP66, complete with one 16 A switch and socket on surface or in recess, complete with connections, testing and commissioning etc. as required.
1
3391
3391
Supplying and fixing following way, single pole and neutral, PVC Weatherproof IP65, MCB distribution board, 240 volts, on surface/ recess, complete with din bar etc. as required. (But without MCB/RCCB/Isolator).
-
-
-
4 module MCB DB with DIN rail
1
2538
2538
8 module MCB DB with DIN rail
1
3406
3406
Supplying and fixing a PVC cable gland suitable for following size copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required.
-
-
-
Up to 6 sq mm
1
22
22
For 2 x 10/ 16 sq mm
1
52
52
For 2 x 25 sq mm
1
69
69
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL pipe as required.
(Cable route marker will be provided along with length of cable as per requirement which will be paid separately.)
-
-
-
2 X 16 Sq.mm
350
101850
291
3.5 X 35 Sq.mm
250
131250
525
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose for connections etc as required.
-
-
-
2 X 16 Sq.mm
20
5600
280
3.5 X 35 Sq.mm
20
10320
516
Supply and drawing of 3 x 2.5 sq mm PVC insulated, FRLS PVC sheathed copper conductor multi core flexible cable into the existing street light pole, DWC Pipe / loose as per requirement including making connections at one end with the street light fitting fixed to the top of the pole and the other end with the control gearbox, including drawing out the burnt-out wires from the pole if required, etc. as required.
10
1660
166
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
4
2340
585
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 16 sq. mm (22mm)
20
5120
256
3½ X 35 sq. mm (32mm)
4
1476
369
Providing and fixing G.I. pipes complete with G.I. fittings including trenching(75 cm deep) and refilling etc.
-
-
-
50 mm dia nominal bore
30
22864
762.15
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
40 mm dia (OD-40 mm & ID-32 mm nominal)
10
960
96
63 mm dia ( OD-63 mm & ID-51 mm Nominal)
480
118560
247
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
1
8340
8340.85
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
1
1503
1503.6
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
-
-
-
Bituminous portion
1
5032
5032.25
The road crossings of power cable through trenchless boring. Trenchless horizontal boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 200 mm dia DWC HDPE / G.I. /PVC
15
9765
651
Supplying, installation, testing & commissioning of double door , outdoor totally enclosed, dust and vermin proof, cubical type LT panel having provision for wall Mountingsuitable for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area not be less than 0.900 X 0.700 sq.mtr (Approx.) & depth of 250 mm fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland, plates i/c cleaning & fi nishing complete with 7 tank process for powder coating in approved shade, having 100 Amp capacity extensible type TPN aluminium alloy bus bars of hight onductivity, DMC / SMC bus bars of high conductivity, DMC/ SMC bus bar supports, with short circuit withstand capacity of 31 MVA for 1 Sec., fabrication shall be done in transportable sections, entire panel shall have a common allumiium earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch 10 sq. mm. PVC insulated copper conductor S/C cable, cable alleys, cable gland plates in two half, i/c providing following switch gears :-
-
-
-
63 Amp 4 pole, 18 Ka (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic with Direct Rotary Handle, Adjustable overload settings: 0.8 - 1.0 x In- 1No.
-
-
-
32 Amp 2 pole, = 10 Ka (Ics=Icu) at 220 V Short CKt. Current rating - 6
-
-
-
Space for Single Phase Energy Meter- 6 No.
-
-
-
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete with 3 Nos. resin cast CTs of 250/5 Amp, class accuracy 5P10 and 15 VA burden, with control wiring with backup MCB's & selector switch - 1 Set.
-
-
-
LED type Phase Indicating lamp 3 Nos- 1Set
-
-
-
Danger notice plate -1 No.
3
117564
39188
Supplying, installation, testing, commissioning & erection of 3 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet,
-
-
-
including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont
20
339980
16999
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete (For Foundation of Pole)
12
4705
392.15
Supplying and fixing of track for track light complete etc as required
1
1935
1935
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (Also embedding in cement concrete, cost of concrete to be paid separately)
8
1006
125.75
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
13710
6855
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
10
2870
287
Providing and fixing 6 SWG dia GI Wire on surface or in reccess for loop earthing alongwith existing surface/ reccess conduit / sub main wiring / cable as reqired.
20
840
42
Providing & Fixing 25mmx5mm GI strip on surface or in reccess for connections etc. as required.
10
2440
244
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
1036
518
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and wa tering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
14944
7472
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
10
1130
113
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
20
2520
126
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
20
3940
197
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
242
121
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
5
975
195
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
5
400
80
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
5
810
162
Supplying, installation, testing and commissioning of 2 Ton, Inverter type, 5 Star BEE rating, Hi-wall Split type Air conditioner complete suitable for operation on 230 V, 50 Hz single phase AC supply, with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit with copper pipe wrapped with insulation, Drain pipe and connecting cable, copper Condenser and Evaporator Coil, remote control, user manual with warranty certificate as per OEM specifications). i) Connecting copper pipes and cable length 3 mtrs.
ii)Warranty : minimum 1 Year on complete Unit, PCB warranty 5 Years and 10 Years on Compressor.
iii) Cooling capacity (100%) as per BEE label : 7000 Watt minimum
iv) Rated ISEER : minimum 5
v) The AC should be designed to work at a maximum operating ambient temperature of up to 52 degrees Celsius (outdoor temperature).
(Daikin / Blue star / O' General / Mitsubishi/ Voltas/ Carrier )
1
78631
78631
Providing & fixing of refrigerant copper piping with insulation and wire for 2 ton Split AC as per manufacturers specification , clamps, etc. complete as reqd. ( two copper pipes one suction and one discharge line with wire and foam insulation tubing will be measured as one unit)
10
12120
1212
Supply, Installation, testing and commissioning of wall mounted type voltage stabilizer suitable for 2.0 Ton Split Air conditioner with High / Low voltage cut off, thermal overload relay and Time Delay Relay, WORKING VOLTAGE RANGE : 150-285 Volts including connection etc. as required. (V-Guard make-Model VND 500 or similar of Totaline / Logicstat / Microtek/Luminous / Bluebird with minimum 3 year warranty.)
1
5469
5469
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
40 mm
10
2280
228
Servicing and Testing of Split Type/Cassette Type following Capacity Air conditioning units including lubricating all movable parts, i.e. all types of motors, washing the cooling coil, condenser coil with water and a non-acidic cleaning agent, i.e. vaniklin-wb or equivalent chemical, cleaning of the filter, checking for all types of faults, cleaning of outer body, testing fan alignment of the blower motor, removing water leakage if any, etc. complete as required.
-
-
-
1.5 ton / 2 ton Split AC
2
1264
632
Supplying and charging of R-22/ R-410A/R-32 suitable refrigerant Gas (as per manufacturer's recommendations) in the following type and capacity Air Conditioner including detecting and removing the leakage, brazing, pressure testing after removing the leakage, flashing, vacuumizing, testing etc. complete as reqd.
-
-
-
1.5 ton / 2 ton Split Air Conditioner
2
5052
2526
Replacement of the existing reciprocating/rotary compressor of the following capacities split air conditioner units, including cutting and joining the suction and discharge copper pipes, brazing, and testing, including dismantling the old worn-out compressor, etc. The dismantled compressor will be kept by the contractor and the net rate will be quoted, reducing its value. (one year manufacturer's Warranty on new Compressor). (Carrier Totaline/ Emerson/ Hitachi/ LG/ Tecumseh/ kirloskar/ voltage )
-
-
-
1.5 ton Split AC
1
8313
8313
Supplying and toping up of suitable AC refrigerant gas (R- 22/R-32/R410A) in split type 1.5 ton /2 ton AC unit etc. complete as required.
2
1586
793
Supplying and fixing of outdoor floor mounted bracket suitable for 1.5/ 2 ton split Air conditioner outdoor unit etc. complete as required.
2
1608
804
Providing and fixing CPVC pipe 20 mm dia with all accessories e.g. elbows, unions, sockets, reducers, reducing tees, nipples etc., including fixing the pipe with clamps at 1.00 m spacing on wall / floor etc. as required. (Ashirwad /Astral /Finolex/ Supreme/ Prayag )
5
775
155
Providing and fixing flexible drain pipe for air conditioners etc. as required.
5
570
114
Providing and replacement of following spare part suitable for Split type AC unit of 1.5/2 TR capacity i/c dismantling the existing defective spare part, testing and commissioning of the same including credit for old scrap material which will be retained by the contractor. etc. complete as reqd. (Six months warranty will be provided on the repaced spares by the contractor)
-
-
-
Outdoor Fan Blade for 1.5 Ton /2 Ton capacity Split AC.
1
1552
1552
Condenser fan motor for 1.5 Ton /2 Ton capacity Split AC.
1
2421
2421
Indoor Blower Motor for 1.5 Ton /2 Ton capacity Split AC.
1
2926
2926
Split AC Indoor Swing Motor for 1.5 Ton /2 Ton capacity Split AC.
1
667
667
Indoor Blower Wheel for 1.5 Ton /2 Ton capacity Split AC.
1
2063
2063
Metal Jaali Cover for Outdoor Units' Fan. for 1.5 Ton /2 Ton capacity Split AC.
1
655
655
Running capacitor 35 to 55 MFD for 1.5 Ton /2 Ton capacity Split AC.
1
532
532
Capacitor 1.5 MFD to 6 MFD for 1.5 Ton /2 Ton capacity Split AC.
1
300
300
AC Remote for 1.5 Ton /2 Ton capacity Split AC.
1
589
589
Thermostatic expansion valve for 1.5 Ton /2 Ton capacity Split AC.
1
370
370
Temperature sensor for 1.5 Ton /2 Ton capacity Split AC.
1
809
809
Condenser coil for 1.5 Ton Split AC
1
3684
3684
Condenser coil for 2.0 Ton Split AC
1
4889
4889
Providing and fixing of the PCBs of existing fixed speed Split/Cassette ACs including dismantling existing falulty PCB and including credit for old scrap PCB which will be retained by the contractor etc. as required with 6 months warranty.
-
-
-
1.5 ton / 2 ton Split AC
1
3238
3238
Supplying and fixing of nitrile rubber insulation refrigerant copper pipe i/c sealing the joint with tape, removing damage insulation, including credit for old scrap material which will be retained by the contractor. etc. complete as required..
5
630
126
Dismantling of existing of 1.5 ton /2.0 ton split air conditioner with indoor unit, out door unit and copper piping etc. complete as reqd.
1
858
858
Installation testing and commissioning of 1.5 ton /2.0 ton split air conditioner with indoor unit, out door unit and copper piping etc. as required.
1
1716
1716
Providing & fixing of refrigerant copper piping with insulation and wire for 1.5 ton/2 ton Split AC as per manufacturers specification , clamps, etc. complete as reqd. ( two copper pipes one suction and one discharge line with wire and foam insulation tubing will be measured as one unit) .
1
1102
1102
Supplying and wrapping white/beige waterproof tape around existing refrigerant ac pipes, etc. complete as required.
3
141
47
Supplying and fixing of following sizes of PVC trucking (Casing and Capping) along with accessories like elbow, coupling, tee in surface. etc. as required. (Precision /Legrand / AKG / Schneider / Pressfit)
-
-
-
100 mm x 100 mm
3
3153
1051
Checking and testing the following capacities air conditioning unit for any defects and repairing it, including servicing, cleaning the filter, and removing water leakage if any, etc. complete as required.
-
-
-
1.5 ton / 2 ton Split AC
2
1182
591
Rewinding of following size ceiling fan / exhaust fan/ Wall fan motor including complete removal of existing burnt out winding and rewinding of the fan with suitable size enameled copper wire, including sleeving, suitable insulation materials, varnishing etc., complete with dismantling and reassembling after repair, including connection testing etc. as required. Removed winding wire shall be retained by the contractor and suitably credited with its value and net value to be quoted.
-
-
-
1200mm Sweep ceiling fan
2
1014
507
1400mm Sweep ceiling fan
1
527
527
Wall Fan upto 400 mm
1
523
523
300mm / 380 mm exhaust fan
1
756
756
450 mm exhaust fan
1
1004
1004
Providing and replacing ball bearing in following size ceiling fan/exhaust fan, including removing old ball-bearing, installing new ball bearing and testing the fan, etc., as required. (Scrap material will be retained by the contractor). (Both side shield ball bearing of SKF/ NBC /TATA )
-
-
-
1200mm Sweep ceiling fan.
2
346
173
1400mm Sweep ceiling fan.
1
173
173
300mm/ 380 mm exhaust fan
1
173
173
450 mm exhaust fan.
1
187
187
Providing and replacing the 2.5 MFD/3.15 MFD fan capacitor in the ceiling fan/exhaust fan/wall fan, including connection and testing, etc., as required. (The old capacitor will be retained by the contractor).
1
45
45
Providing and replacing the 4 MFD fan capacitor in the ceiling fan/exhaust fan/wall fan, including connection and testing, etc., as required. (The old capacitor will be retained by the contractor).
1
53
53
Reconditioning of the oversized bush bearing housing to a suitable ball bearing in the ceiling fan/ exhaust fan/ wall-mounted fans as required and assembling and testing of the fan after repair. All the scrap material should be retained by the contractor.
1
165
165
Providing and replacing the worn-out M.S. shaft of the exhaust fan /wall fan with a suitable size new shaft etc., as required, including removing the old shaft, installing the new shaft, and testing the fan. All the scrap material should be retained by the contractor.
1
158
158
Providing and fixing PVC clamp with connector for the ceiling fan capacitor in the existing ceiling fan, including connection, testing, etc., as required, including credit for the old PVC clamp, which will be retained by the contractor.
2
24
12.02
Supply, Installation Testing and Commissioning of Micro Processor Controlled 1 x 20 KVA UPS input supply of 415 Volts + 15%, 3 Phase, 50 Hz ± 10% and an out put of 415 Volts ±1%, 3 Phase 50 ± 0.1 Hz, Sealed Maintenance Free Batteries to support 60 min (31000 VAH) back up time,Efficiency up to 94%, Input Power Factor =0.99, Input Total Harmonic Distortion (THDi) 3%,consisting of IGBT Rectifier, IGBT Inverter, Battery DC Circuit Breaker with necessary MS enclosure, Inbuilt Static BY PASS Panel (Input & output switches and Auto Static & Manual Bypass Switches), necessary cable alley shall be provided if cable entry/exit for UPS unit is from bottom/sides and necessary hardware & software for BMS Integration with communication port RS 485 ( Status Monitoring ), all interconnecting Copper cables of size approved by Engineer-In-Charge (Battery bank to Battery DC Circuit breaker, Battery DC Circuit breaker to UPS, complete as required) with necessary adequate size of copper lugs etc., with necessary base channels/supports complete as required and all other necessary accessories. (UPS Make -EATON /Schenider / Vertiv Battery make - Exide/Amararaja/Rocket )
1
604907
604907
Dismantling of the existing switch accessories like switches, sockets, and MCBs, etc., as required.
5
20
4
Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store.
5
45
9
Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required.
5
120
24
Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store.
5
300
60
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
1105
221
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
840
168
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
5
355
71
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Above 25 mm conduits.
5
35
7.05
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Up to 25 mm conduit.
5
17
3.53
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
2
5324
2662
Less credit for the unserviciable items dismantled items during execution of the work.
-
-
-
Assorted MCB TP AND TP&N & OTHER SWITCHGEAR
4
-40
-10
Assorted PIANO Type Switches
20
-10
-0.5
Assorted PIANO Type Sockets
10
-15
-1.5
Assorted Bell push/PIANO Type
6
-3
-0.5
Assorted Call bell buzzer single phase
10
-10
-1
Assorted Brass batten/ angle holder/Brass Bracket
9
-18
-2
Assorted Fan regulator/resistance type
20
-10
-0.5
Assorted Telephone Socket outlet
12
-6
-0.5
Assorted T.V. Socket outlet
10
-5
-0.5
Assorted Capacitor, 3.15/2.50/2.25 mfd
10
-5
-0.5
Assorted 1200/1400 mm sweep ceiling Fan with blades
20
-7000
-350
Assorted Fresh Air FAN 200/250
10
-1500
-150
Assorted Exhaust fan 300/380/450
10
-2500
-250
Assorted Wall Bracket Fittings
10
-50
-5
Assorted fluorescent Light Fittings
10
-50
-5
Assorted Bulk Head Fittings
10
-150
-15
less credit for the dismantled Copper wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-1500
-150
less credit for the dismantled aluminium wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-350
-35
Assorted metal switch box.
21
-42
-2
Assorted MCB DB SPN with out MCBs
22
-330
-15
Assorted MCB DB TPN with out MCBs
16
-320
-20
Assorted MCB SP
20
-700
-35
Assorted MCB DP
20
-140
-7
Assorted MCB TP AND TP&N
4
-40
-10
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 11,36,693/-
1
11366
11366.93
Add Difference in GST of(18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 11,36,693/- (DSR) + 11,366.93 (L/Cess) = 11,48,059.93
1
72672
72672.19
Less COST INDEX on DSR( E ) @ -2.73 % i.e Rs. 11,36,693/- (DSR) + 11,366.93 (L/Cess) + Rs. 72,672.19 (GST difference) = Rs. 12,20,732.12
1
-33325
-33325.99
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 11,36,693/- (DSR) + 11,366.93 (L/Cess) + Rs. 72,672.19 (GST difference) + 45,951.90 (DSR Civil) - 33,325.99 (Cost Index) = Rs. 12,33,358.03
1
-33300
-33300.67
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements