National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 1,89,092Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_842077_1Tender No
48/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
3.89
8340
32445.91
... More
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
32.5
6518
211854.5
... More
Centering and shuttering including strutting, propping etc. and removal of form work for:
-
-
-
... More
Columns, piers, abutments, pillars, posts and struts
51.84
961
49833.79
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
18
749
13487.4
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
15.22
11505
175113.71
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Shelves (Cast in situ)
8.08
927
7492.18
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
5
736
3682
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
35.64
961
34260.73
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
1241.6
107
133906.56
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6(1 cement :6 coarse sand)
3.75
7132
26745.94
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6(1 cement : 6 coarse sand)
2
9105
18211.9
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Cement mortar 1:4(1 cement :4 coarse sand)
5.4
1123
6068.52
... More
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
45
60
2738.25
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
... More
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
10.29
2392
24620.37
... More
25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws
12.6
2093
26380.62
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
-
-
-
... More
With 12 mm mild steel U beading
10
939
9392
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
300x16 mm
10
303
3032.5
... More
250x16 mm
27
260
7036.2
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
250x10 mm
10
115
1151.5
... More
200x10 mm
27
99
2691.9
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
125 mm
37
66
2451.25
... More
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
140
570
79933
... More
Providing and fixing to existing door frames.
-
-
-
... More
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856, complete as per direction of Engineer-in-charge.
37.38
4488
167796.95
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
117
23470
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished welded type tubes
7164
194
1392681.6
... More
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
218.45
97
21233.34
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete.
-
-
-
... More
Galvanised M.S. Wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides
10
844
8447
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
-
-
-
... More
4.0 mm thick glass panes
20
1064
21293
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
... More
25 mm thick
160
1948
311720
... More
Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
... More
Size of Tile 600x600 mm
26.6
1553
41321.77
... More
Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Double charge vitrified tile polished finish of size
-
-
-
... More
Size of Tile 600 x 600 mm
5
1453
7268.25
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
110 mm
10
136
1361.5
... More
Single pushfit Coupler
-
-
-
... More
110 mm
10
127
1276
... More
Single tee with door
-
-
-
... More
110x110x110 mm
20
234
4683
... More
Single tee without door
-
-
-
... More
110x110x110 mm
15
221
3320.25
... More
Bend 87.5°
-
-
-
... More
110 mm bend
25
150
3758.75
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm
20
371
7426
... More
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
36
738
26591.4
... More
12 mm cement plaster of mix:
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
175
343
60138.75
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
... More
1:6(1 cement: 6 coarse sand)
150
395
59302.5
... More
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
... More
On steel work
200
241
48350
... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
... More
Two or more coats on new work
100
155
15590
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
150
156
23407.5
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour
-
-
-
... More
Old work (one or more coats)
500
62
31350
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
3500
19
69125
... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
-
-
-
... More
One or more coats on old work
250
102
25700
... More
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
... More
Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface
1000
120
120750
... More
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
... More
With cement mortar 1:4 (1cement: 4 coarse sand)
30
560
16815
... More
Renewing glass panes, with putty and nails wherever necessary including racking out the old putty:
-
-
-
... More
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.
15
433
6506.25
... More
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge.
-
-
-
... More
Orissa pattern W.C Pan of size 580x440 mm
13
4478
58223.75
... More
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
13.3
3
45.89
... More
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall
100
3
325
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
5
2434
12171.25
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
2
3551
7102.5
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar
10
2060
20602
... More
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
... More
Of area 3 sq. metres and below
50
143
7175
... More
Demolishing mud phaska in terracing and disposal of material within 50 metres lead.
46.8
914
42789.24
... More
Dismantling stone slab roofing over wooden karries or R.C.C. battens (dismantling karries and battens to be paid for separately), including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
-
-
-
... More
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
40
112
4482
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
500
54
27325
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
-
-
-
... More
Cement concrete prepared with batch mixing machine
10.92
10529
114980.5
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
... More
W.C. pan with ISI marked white solid plastic seat and lid
11
6515
71671.05
... More
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
... More
10 litre capacity - White
25
1190
29766.25
... More
Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings :
-
-
-
... More
Flat back wash basin of size 450x300 mm
20
627
12540
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Semi rigid pipe
-
-
-
... More
40 mm dia
20
116
2334
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
... More
Rectangular shape 453x357 mm
20
1361
27236
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
10
1083
10835
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
... More
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
25
708
17723.75
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal dia Pipes
150
497
74670
... More
20 mm nominal dia Pipes
150
537
80640
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
25 mm nominal dia Pipes
150
355
53310
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
20 mm nominal bore
20
462
9250
... More
25 mm nominal bore
10
464
4640.5
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
45 cm length
-
-
-
... More
15 mm nominal bore
40
97
3910
... More
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
... More
150 mm diameter
20
222
4447
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
15 mm nominal bore
10
318
3183.5
... More
20 mm nominal bore
10
346
3468
... More
25 mm nominal bore
10
439
4392.5
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
7500
11
82500
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
... More
15 mm nominal bore
40
506
20272
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
30
670
20113.5
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
30
574
17229
... More
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
50
74
3740
... More
Providing and fixing PTMT bib cock of approved quality and colour.
-
-
-
... More
15 mm nominal bore, 86 mm long, weighing not less than 88 gms
15
125
1884
... More
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
... More
Circular type
-
-
-
... More
125 mm nominal dia with 25 mm waste hole
30
51
1555.5
... More
Dismantling of old S.W. pipes including breaking of joints and bed concrete stacking of useful materials near the site within 50 m lead and disposal of unserviceable materials into municipal dumps :
-
-
-
... More
100 mm diameter
50
89
4450
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
... More
L D- 2.5
-
-
-
... More
Rectangular shape 600x450 mm internal dimensions
4
1437
5750.6
... More
Raising manhole cover and frame slab to required level including dismantling existing slab and making good the damage as required (Raising depth of manhole to be paid separately) :
-
-
-
... More
Rectangular manhole 90x80 cm with rectangular cover 600 x 450 mm of grade LD - 2.5
2
2625
5251
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
... More
For fixed portion
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
250
530
132725
... More
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
... More
Powder coated aluminium (minimum thickness of powder coating 50 micron)
200
634
126890
... More
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
... More
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
20
1505
30105
... More
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
... More
Upto 5 mm depth and 5 mm width
50
96
4837.5
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry.
100
617
61705
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
312.75
1684
526858.65
... More
Cost of DSR items = Rs. 51,61,109.51 A Deduct GST Factor on DSR-2023 Items @ total of DSR rates - 0.973 of DSR rates) i.e. 51,61,109.51 - 0.973 A = Rs. 1,39,349.96
1
-139349
-139349.96
... More
Design,Supply,fabrication and installation of membrane panels and steel cables and GI corner fittings nuts and bolts and associated accessoeis with pvc/pvdf coated membrane work. Membrane shall be pvc/pvdf coated with HT Polyster yrns of 1100 DTEX and Type-II from serge ferrari 902 S2 Mehlar/equavalent Type-II with minimum weight 900 Gram GSM minimum Tear strength wrap/weft 4200/4000 N/5 cm minimum tear strength warp/weft-550/500N febric flame retardancy and warranty of 10 years. The design complies with the equirements of BS and EU standard. The tensioned membrane structural shall include engineering desing of structural membrane and accessories parts. The work shall include CHS member of YST 310 Mpa plate YST 245 MPA anchor bolts and nuts and washer area to be HDG GR 8.8 structural steel should be with class A HDG wire rope with minimum tensile strength of 1570 Mpa and singal construction swagged cable and conectors. (The structures steel members will be paid saperately) Manufacturing warranty of 10 years has to be submitted by the contractor. The contractor shall provide orignal manufacture warranty of 10 years. Actual surface of walk away end to end shall be measured (Rate includes cost of febric patterns cutting,forming,febrication hot weld stich of febric transportationto the sites assembeling and installation,hardware,EPDM gaskit and required accessories wherever required complete including lifts up to all height tools and plants and necessary scaffolding etc required for all operation in all respect as per direction of EIC.)
340
2618
890120
... More
Credit for MS section like angle, tee, flats, grill etc.
250
-28
-7000
... More
Credit for SCI/CI pipe
250
-28
-7000
... More
Credit for G.I. pipe
150
-40
-6000
... More
Credit for CP fittngs etc
100
-350
-35000
... More
Providing and fixing 15mm nominal dia basin pillar cock Cat No. OPP-CHR-15011BPM of JAQUAR make or Euronics Make Model No. RIV-1014R or equivalent as approved by Engineer-in-Charge.
10
1053
10530
... More
Providing and laying rectified matt finish Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make in all colours, shades and pattern matching with bathroom wall tile concepts, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
104.23
1439
150028.66
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades and pattern (bathroom/kitchen wall tile concept using highlighters etc.) of any size (minimum size 300x600mm or more) as approved by Engineer -in-Charge in kitchen walls, bathroom walls and dados laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints and pointing in white cement mixed with pigment of matching shade complete.
360.6
1586
572019.78
... More
Cleaning of chocked sewer line by diesel running vehicle mounting hydraulic operated high pressure suction cum jetting sewer cleaning machine fitted with pump having 4000 litres suction capacity and 6000 litres water jetting tank capacity including skilled operator, supervising engineer etc. for cleaning and partial desilting of manholes and dechocking of sewer lines. Dechocking and flushing of sewer line from one manhole to another by high pressure jetting system of 2200 PSI for sewer line from 150 mm dia upto 300 mm (Per Day Min 8 Hrs Daily).
1
50000
50000
... More
Providing and laying Broken Autoclaved Aerated concrete(AAC) blocks masonry with 150 mm to 300 mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately).
5
5410
27050
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white stop cock,spreader,SS tube atc and all fittings complete, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with quarter round stop cock with mannual controll system
4
4200
16800
... More
Removing and lifting of malba/richer mix concrete in sunken portion, lead up to 50 mtr etc all complete as per direction of EIC.
3
553
1660.23
... More
Providing and Fixing on wall face unplasticidsed Rigid PVC rain water pipes confirming to IS: 13592 Type-B,including jointing with seal ring confirming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes with 6 kg/cmxcm Pressure. 110 mm diameter
70
488
34160
... More
Electrical
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group A
5
1015
5075
... More
Group C
5
1467
7335
... More
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
-
-
-
... More
Group A
5
574
2870
... More
Group C
40
894
35760
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group A
5
649
3245
... More
Group C
5
858
4290
... More
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
40
334
13360
... More
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
537
10740
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
10
233
2330
... More
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
10
439
4390
... More
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
40
570
22800
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 X 1.5 Sq.mm
20
95
1900
... More
3 x4 Sq.mm
20
206
4120
... More
6 x4 Sq.mm
20
396
7920
... More
3 X 6 Sq.mm
20
304
6080
... More
3 X 10 Sq.mm
30
523
15690
... More
2 X 10 + 1 X 6 Sq.mm
30
365
10950
... More
4 X 10 + 2 X 6 Sq.mm
30
718
21540
... More
1 x 4 Sq.mm
10
87
870
... More
Providing and fixing Din-rail 35 mm x 7.5 mm on exisitng panel etc., as required. i) Din-rail 35 mm x 7.5 mm
1
389
389
... More
Supplying and fixing of G.I Saddles 23 mm x 1.5 mm on following size PVC / steel conduit/ cable / pipe etc as reqd. (Astral, Prayag, Ashirvad, Finolex, or as approved by the engineer-in-charge)
i) 50 mm
10
39
390
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
20
128
2560
... More
25 mm
20
128
2560
... More
32 mm
20
128
2560
... More
50 mm
5
284
1420
... More
Supplying and installing the following size PVC trunking cable management system, complete with front cover, internal/external/flat angles, joints, junctions, end caps, and finishing accessories, etc. as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
... More
100 x 50
10
1587
15870
... More
32 X 12.5
10
318
3180
... More
Supplying and fixing of following sizes module frame on existing trunking including arranging the cover making good the same as original complete etc. as required.
(Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
... More
1-3 Module Frame
2
205
410
... More
4-5 Module Frame
2
246
492
... More
8 Module Frame
2
399
798
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
10
608
6080
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Bends" with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
4
1481
5924
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee " with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
4
1521
6084
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
10
669
6690
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
4
1159
4636
... More
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
2
298
596
... More
3 Module (100mmX75mm)
2
327
654
... More
4 Module (125mmX75mm
2
343
686
... More
6 Module (200mmX75mm)
1
402
402
... More
8 Module (125mmX125mm)
1
454
454
... More
12 Module (200mmX150mm)
1
547
547
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
5/6 amp switch
10
103
1030
... More
15/16 amp switch
10
156
1560
... More
3 pin 5/6 A socket outlet
10
122
1220
... More
6 pin 15/16 A socket outlet
10
197
1970
... More
25 Amp Switch
10
297
2970
... More
Supplying and fixing two module stepped type electronic modular fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
369
3690
... More
Supplying and fixing two module stepped type electronic piao fan regulator on the existing phenolic cover plate switch box including connections but excluding cover plate etc. as required.
5
342
1710
... More
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
-
-
-
... More
5/6 amps switch
5
52
260
... More
15/16 A switch
2
121
242
... More
3 pin 5/6 A socket outlet
2
69
138
... More
6 pin 15/16 A socket outlet
2
137
274
... More
Supply & Fixing suitable size GI Box with modular plate and cover in front on surface or in reccess including provising and fixing 6 pin 5/6 and 15/16 amps moduler socket outlet and 15/16 amps moduler switch connection ect. as required.
5
586
2930
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
5
680
3400
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
5
477
2385
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
( For Geyser)
12
727
8724
... More
Supplying and fixing suitable size GI/ PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 6 pin 15/16 A modular socket outlet and 2 nos. 15/16 A modular switch, connections etc. as required.
2
996
1992
... More
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
5
87
435
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
1 or 2 Module
1
133
133
... More
3 Module
1
151
151
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
40
400
... More
Providing and fixing a metallic louvred shutter suitable for following sizes exhaust fan, the louvres should be able to open when the fan is on and close when the fan is turned off, on the existing opening on the wall, etc., as required.
-
-
-
... More
300 mm
1
832
832
... More
380 mm
1
1062
1062
... More
450 mm
1
1368
1368
... More
Providing and fixing 3 mm thick PVC/ phenolic laminated round sheet cover with a minimum of 170 mm dia on the existing fan box with two screws, etc., as required.
5
31
155
... More
Providing and fixing 3 mm thick PVC / phenolic laminated round sheet cover on the existing junction box with two screws, etc., as required.
5
11
55
... More
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
5
110
550
... More
Supplying and fixing suitable size GI box in recess, including providing and fixing of 2/3 Module LED Foot light / skirting light, including connection etc. as required.
2
905
1810
... More
Supplying and fixing two module Buzzer on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
336
672
... More
Supplying and fixing two module bell/ chime on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
523
1046
... More
Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
46
230
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
52
260
... More
Supplying and fixing PRCD (Portable Residual Current Device) Plug top, 16 A 30 mA rating including connection etc. as required.
2
798
1596
... More
Supplying and fixing Plug top following rating including connection etc. as required.
-
-
-
... More
16 A 3/6 Pin Plug top
2
127
254
... More
6 A 3/6 Pin Plug Top
2
103
206
... More
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
2
563
1127.8
... More
Supplying and fixing of following size PVC Saddles with base and screws on existing PVC / steel conduit etc as reqd (Precision / AKG /Polycab /Finolex / Anchor/ GM)
-
-
-
... More
20 mm
10
16
160
... More
25 mm
10
17
170
... More
Supplying and fixing of 23 mm x 1.5 mm S.S./G.I. saddles on the following sizes of existing PVC or steel conduit, cable, pipe, etc., as required (Astral, Prayag, Ashirvad, Finolex, or as approved by the engineer-in-charge)
-
-
-
... More
50 mm
5
39
195
... More
Providing and fixing Din-rail 35 mm x 7.5 mm on exisitng panel etc., as required.
1
389
389
... More
Supplying and fixing 2 way, 60 Amp, two way connectors on the existing looping box including connection etc as required.
10
110
1100
... More
Supplying and fixing Bakelite Sheet with screw in the existing looping box/Panel including cutting the sheet to required shape and size complete etc as reqd.
-
-
-
... More
6 mm thick
0.5
4393
2196.5
... More
Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Ventil Air or with similar specifications C&G / Orient / Usha / Almonard)
5
2348
11740
... More
Supplying and installation of following size PVC Exhaust fan with louver shutter in the existing opening, including making good the damage, connection, testing , commissioning etc as required.
-
-
-
... More
200 mm sweep in size
1
2345
2345
... More
250 mm sweep in size
1
2500
2500
... More
Supplying and installation of following sweep, 1400 RPM heavy-duty, single phase, metallic exhaust fan Conforming to IS:2312 -1967 in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Turbo force Heavy Duty Exhaust Fan or with similar specifications C&G / Orient / Usha / Almonard)
-
-
-
... More
300 mm sweep
1
5211
5211
... More
380 mm sweep
5
6176
30880
... More
Making holes of the required size and shape in a brick masonry wall for installation of the following size exhaust fan, including making good the wall by plastering and finishing with the matching surface, etc., complete as per the direction of the engineer-in-charge.
-
-
-
... More
225 mm /230 mm sweep
2
142
284
... More
250 mm sweep.
2
197
394
... More
450 mm sweep.
2
516
1032
... More
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 400 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
3
643
1929
... More
Supply and installation of following sweep size, 220 V, wall mounted fan along with speed regulator unit for speed control, on the existing wall, including connection, testing, commissioning etc. as required. (Make: Atomberg /Crompton/Havells/Orient/Usha/Bajaj/Almonard)
-
-
-
... More
400 mm sweep
1
3209
3209
... More
Cutting a hole of the required size and shape on the window or ventilator glass pane for the installation of an exhaust fan of size up to 150 mm sweep, etc., complete as per the direction of the engineer-in-charge.
1
122
122
... More
Supply, installation, testing and commissioning of surface mounted LED downlighter luminaire in metallic housing, with a minimum system lumen output of 1500 lumen and with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required.
30
2501
75030
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty of Atomberg/ Usha/ Orient / Havells /Bajaj/Crompton make)
50
3465
173250
... More
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6, Air delivery minimum 170 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty)
1
3314
3314
... More
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED recessed Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, suitable for recessed mounting, Armstrong/grid/POP/GB ceiling complete with all accessories, diffuser and electronic driver, directly on the ceiling, including connections and earthing etc. as required.
1
3667
3667
... More
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
50
882
44100
... More
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 4000 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
30
1461
43830
... More
Supply, installation, testing, and commissioning of LED bulkhead fittings with IP 66 ingress protection, with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature of 5500K–6500 K, average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser, electronic driver, etc. as required directly on the wall, including connections, etc. as required
1
1716
1716
... More
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
10
640
6400
... More
Supply, installation, testing and commissioning of wall-mounted light fixture complete with B22/ E27 base, metal base in Nickel / Brass finishing with diffuser and 9 watts LED blub etc., as required directly on the wall, including connections etc. as required. ( Havells FLORETINE WL 1 LS or similar in Wipro/Philips/Jaquar/LT as approved by the Engineer -in- charge)
1
1287
1287
... More
Supplying & Fixing of 2 to 4 watt LED wall light as bed light etc required as per direction of engg-in-charge.
1
1320
1320
... More
Supplying, installation, testing, and commissioning 100 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)
1
7580
7580
... More
Supplying, installation, testing, and commissioning 200 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)
4
13545
54180
... More
Supply, installation, testing and commissioning of 25 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
1
7332
7332
... More
Supply, installation, testing and commissioning of 45 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. (Warm WHite/ Cool White as per decision of Engineer-in-Charge)
Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
20
10383
207660
... More
Supplying, installation, testing, and commissioning of 10 to 11 Watt, .06 Metre (nominal size) LED Bollard Light fitting complete with LED module, electronic driver, diffuser, and all other accessories, minimum system luminous efficacy of 80 lm/W, the bollard housing should be made up of metallic pipe duly powder coated with the mounting flange at the bottom, including providing 3 nos foundation bolts, two numbers 32 mm. dia PVC pipe for cable entry (from the bottom of the foundation to the top of the foundation for cable entry), and providing the foundation of Cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size ) of size 0.3-metre dia and 750 mm height (250mm above ground and 500 mm below ground) including excavation as required and complete with connections, lugs, terminals, connectors for the connection of cable and wires in the fitting etc., complete as required. (Make Havells /Philips /Wipro as per sample approved by Engineer -in - Charge)
20
8593
171860
... More
Supplying, installation, testing and commissioning of 45 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 100 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
2
4906
9812
... More
Supplying, installation, testing, commissioning & erection of 3 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont
20
15503
310060
... More
Supplying, installation, testing, commissioning & erection of 6 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont
1
27068
27068
... More
Supply and installation of round bracket (ring type) suitable for mounting four floodlights. The round bracket should be made of 40 dia. (nominal bore) B-Class G.I. pipe on the periphery and four supports (spokes) of 40 mm B-Class G.I. pipe duly welded with a pole cap of 300 mm length at the centre. The pole cap should be of suitable dia for mounting on an existing polygonal pole with a top dia. of 70 mm. The dia. of the round bracket should not be less than 120 cm. The bracket pipes should be suitable for acting as conduits for wires for the wiring of floodlights. The pole cap should have four holes and four numbers of G.I. nuts and bolts for fixing the bracket on the top of the polygonal pole. (drawing will be get approved before fabrication )
1
4931
4931
... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. (Also embedding in cement concrete, cost of concrete to be paid separately)
10
125
1257.5
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
32
256
8192
... More
Double pole
4
656
2624
... More
Triple pole
1
1007
1007
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
13
130
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required .
(Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
12 way (4 + 36), Double door
1
4091
4091
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
1
1170
1170
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
(Note : DB should be suitable for RCCB/RCBO as incomer.)
-
-
-
... More
8 way , Double door
2
2573
5146
... More
16 way , Double door
2
3141
6282
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required
-
-
-
... More
For 8 way, Double door SPN MCBDB
2
832
1664
... More
For 14/16 way, Double door SPN MCBDB
2
902
1804
... More
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
1
1621
1621
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
... More
100 A, 16 KA/18KA/ 25KA, TPMCCB
1
3777
3777
... More
100 A,30KA,FPMCCB
1
7377
7377
... More
200 A,36KA,FPMCCB
1
15206
15206
... More
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
1
1592
1592
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
4
13
52
... More
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
40 A Double pole
1
1247
1247
... More
63 A Double pole
1
1247
1247
... More
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 A Triple pole and neutral
1
2388
2388
... More
63 A Triple pole and neutral
1
2388
2388
... More
Fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
... More
6 to 16 way, Double door
1
522
522
... More
Supplying and fixing PVC weatherproof, IP66, 16 A, 240 V, switch and Socket box, IP66, complete with one 16 A switch and socket on surface or in recess, complete with connections, testing and commissioning etc. as required.
10
3485
34850
... More
Supplying and fixing following way, single pole and neutral, PVC Weatherproof IP65, MCB distribution board, 240 volts, on surface/ recess, complete with din bar etc. as required. (But without MCB/RCCB/Isolator).
-
-
-
... More
4 module MCB DB with DIN rail
1
2608
2608
... More
8 module MCB DB with DIN rail
1
3500
3500
... More
Supplying and fixing a PVC cable gland suitable for following size copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required.
-
-
-
... More
Up to 6 sq mm
1
23
23
... More
Supplying and fixing a PVC cable gland suitable for following size copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required.
-
-
-
... More
For 2 x 10/ 16 sq mm
1
54
54
... More
For 2 x 25 sq mm
1
71
71
... More
Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium armoured conductor power cable 1.1 KV grade of following size in the existing RCC/ HUME/ STONEWARE/ METAL/ DWC pipe as required.
-
-
-
... More
2 X 16 Sq.mm
300
299
89700
... More
3.5 X 50 Sq.mm
60
748
44880
... More
Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium armoured conductor power cable 1.1 KV grade of following size in Masonry Open Duct Loose/loop/in panel etc. complete etc as required.
-
-
-
... More
2 X 16 Sq.mm
30
288
8640
... More
3.5 X 50 Sq.mm
10
734
7340
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
2 X 16 sq. mm (22mm)
2
256
512
... More
3½ X 50 sq. mm (35mm)
2
413
826
... More
Supply and drawing of 3 x 2.5 sq mm PVC insulated, FRLS PVC sheathed copper conductor multi core flexible cable into the existing street light pole, DWC Pipe / loose as per requirement including making connections at one end with the street light fitting fixed to the top of the pole and the other end with the control gearbox, including drawing out the burnt-out wires from the pole if required, etc. as required.
250
171
42750
... More
Supply and drawing of 3 x 1.5 sq mm PVC insulated, FRLS PVC sheathed copper conductor multi core flexible cable into the existing street light pole, DWC Pipe / loose as per requirement including making connections at one end with the street light fitting fixed to the top of the pole and the other end with the control gearbox, ( including drawing out the burnt-out wires from the pole if required), complete etc. as required.
10
117
1170
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching(75 cm deep) and refilling etc.
-
-
-
... More
50 mm dia nominal bore
20
762
15243
... More
80 mm dia nominal bore
10
1041
10417
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
40 mm dia ( OD- mm & ID- mm Nominal)
250
207
51750
... More
63 mm dia ( OD-63 mm & ID-51 mm Nominal)
300
247
74100
... More
90 mm dia (OD-90 mm & ID-76 mm nominal)
70
290
20300
... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
2
585
1170
... More
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
2
1477
2954
... More
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.
-
-
-
... More
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
0.5
8340
4170.43
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
1
1503
1503.6
... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
-
-
-
... More
Bituminous portion
0.5
5032
2516.13
... More
The road crossings of power cable through trenchless boring. Trenchless boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 150 mm dia DWC HDPE / G.I. /PVC
10
669
6690
... More
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 75 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 1600G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
3
2673
8019
... More
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with the required front area (but not less than 0.54 sqm) and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 200 amps, 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC/SMC bus bar supports at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring from busbars to switch gears and up to terminal blocks with suitable sized solid aluminium strips, the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common aluminium/G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 107.01-107.10
(The drawing will be approved before the fabrication of the panel.)
0.54
32573
17589.42
... More
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
... More
Red Phase indication LED lamps.
1
157
157
... More
Yellow Phase indication LED lamps.
1
157
157
... More
Blue Phase indication LED lamps.
1
253
253
... More
2 Amp SPMCB, BB10020C
1
453
453
... More
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete selector switch - 1 Set.
1
3563
3563
... More
CTs of 100/5 Amp, class accuracy 1 and 15 VA burden, Automatic Electric Ltd, Indoor Tape Insulated Ring Type.
3
645
1935
... More
63 Amps , FP, MCCB, 25 KA breaking capacity , Ics = 100% Icu with Adjustable overload and fixed short-circuit protection.
1
10188
10188
... More
Direct Rotary Handle (RHOM) for 63 A MCCB.
1
1200
1200
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Three Pole
1
1007
1007
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single Pole
6
256
1536
... More
Supplying, installing, testing, and commissioning of the 250 A sub-main distribution board with MCCBs as incomers and MCCBs as outgoing devices conforms to IEC 61439-2, ingress Protection (IP 43), including fixing on floor or wall interconnections, powder painting, including earthing, etc. as required.
-
-
-
... More
8 Way SMDB (L&T, Cat No.- DA62D1084CZZ0 or similar in Schneider / Legrand/ ABB/ Siemens )
-
-
-
... More
Installation of Below Switch Gears and accessories in & Along above panel
-
-
-
... More
Incomer 250 Amp (L&T, Cat. No.:- CM90638OOPO, DN1-250C 3 Pole MCCB - 250A)
-
-
-
... More
Outgoing
-
-
-
... More
80 Amp(L&T, DN0-100C 3 Pole MCCB - 80A, CM91612OOJOOG)-2 No.
-
-
-
... More
50 Amp (L&T, DN0-100C 3 Pole MCCB - 50A, CM91612OOGOOG)-2 No.
-
-
-
... More
32Amp ( L&T, DN0-100C 3 Pole MCCB )- 2 No.
-
-
-
... More
20 Amp (L&T, DN0-100C 3 Pole MCCB)- 2 No.
-
-
-
... More
Basic Multifunction Meters -1
-
-
-
... More
LED Indicator Lamp, Red/Yellow 240 V AC. -2 Nos
-
-
-
... More
LED Indicator Lamp, Blue 240 V AC. -1 Nos
-
-
-
... More
Corner Box, (L&T, CM91089OOOO)- 4Nos
-
-
-
... More
Metering Extension Box( L&T, CM90439OOPO) 1Nos.
-
-
-
... More
Bottom Cabling Box ( L&T, CM90437OOOO) 1Nos.
-
-
-
... More
Side cabling Box for 8 Way DB, Left (L&T) 1Nos.
-
-
-
... More
Side cabling Box, Right 8 Way DB (L&T) 1Nos.
1
235855
235855
... More
Supplying, installation, testing and commissioning of 2 Ton, Inverter type, 5 Star BEE rating, Hi-wall Split type Air conditioner complete suitable for operation on 230 V, 50 Hz single phase AC supply, with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit with copper pipe wrapped with insulation, Drain pipe and connecting cable, copper Condenser and Evaporator Coil, remote control, user manual with warranty certificate as per OEM specifications). i) Connecting copper pipes and cable length 3 mtrs.
ii)Warranty : minimum 1 Year on complete Unit, PCB warranty 5 Years and 10 Years on Compressor.
iii) Cooling capacity (100%) as per BEE label : 7000 Watt minimum
iv) Rated ISEER : minimum 5
v) The AC should be designed to work at a maximum operating ambient temperature of up to 52 degrees Celsius (outdoor temperature).
(Daikin / Blue star / O' General / Mitsubishi/ Voltas/ Carrier )
4
84904
339616
... More
Providing & fixing of refrigerant copper piping with insulation and wire for 2 ton Split AC as per manufacturers specification , clamps, etc. complete as reqd. ( two copper pipes one suction and one discharge line with wire and foam insulation tubing will be measured as one unit)
10
893
8930
... More
Supply, Installation, testing and commissioning of wall mounted type voltage stabilizer suitable for 2.0 Ton Split Air conditioner with High / Low voltage cut off, thermal overload relay and Time Delay Relay, WORKING VOLTAGE RANGE : 150-285 Volts including connection etc. as required. (V-Guard make-Model VND 500 or similar of Totaline / Logicstat / Microtek/Luminous / Bluebird with minimum 3 year warranty.)
4
5621
22484
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
40 mm
40
228
9120
... More
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
2
6855
13710
... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
40
287
11480
... More
Providing and fixing 6 SWG dia GI Wire on surface or in reccess for loop earthing alongwith existing surface/ reccess conduit / sub main wiring / cable as reqired.
50
42
2100
... More
Providing & Fixing 25mmx5mm GI strip on surface or in reccess for connections etc. as required.
10
244
2440
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
2
518
1036
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclo sure with cover plate having locking arrangement and wa tering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
7472
14944
... More
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
10
113
1130
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
20
126
2520
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
20
197
3940
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
121
242
... More
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
5
195
975
... More
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
5
80
400
... More
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
5
162
810
... More
Rewinding of following size ceiling fan / exhaust fan/ Wall fan motor including complete removal of existing burnt out winding and rewinding of the fan with suitable size enameled copper wire, including sleeving, suitable insulation materials, varnishing etc., complete with dismantling and reassembling after repair, including connection testing etc. as required. Removed winding wire shall be retained by the contractor and suitably credited with its value and net value to be quoted.
-
-
-
... More
1200mm Sweep ceiling fan
5
525
2625
... More
1400mm Sweep ceiling fan
1
547
547
... More
Wall Fan upto 400 mm
1
543
543
... More
300mm / 380 mm exhaust fan
1
764
764
... More
450 mm exhaust fan
1
1015
1015
... More
Providing and replacing ball bearing in following size ceiling fan/exhaust fan, including removing old ball-bearing, installing new ball bearing and testing the fan, etc., as required. (Scrap material will be retained by the contractor). (Both side shield ball bearing of SKF/ NBC /TATA )
-
-
-
... More
1200/1400mm Sweep ceiling fan.
10
174
1740
... More
450 mm exhaust fan.
1
188
188
... More
Providing and replacing the 2.5 MFD/3.15 MFD fan capacitor in the ceiling fan/exhaust fan/wall fan, including connection and testing, etc., as required. (The old capacitor will be retained by the contractor).
10
46
460
... More
Providing and replacing the 4 MFD fan capacitor in the ceiling fan/exhaust fan/wall fan, including connection and testing, etc., as required. (The old capacitor will be retained by the contractor).
5
53
265
... More
Reconditioning of the oversized bush bearing housing to a suitable ball bearing in the ceiling fan/ exhaust fan/ wall-mounted fans as required and assembling and testing of the fan after repair. All the scrap material should be retained by the contractor.
2
166
332
... More
Providing and replacing the worn-out M.S. shaft of the exhaust fan /wall fan with a suitable size new shaft etc., as required, including removing the old shaft, installing the new shaft, and testing the fan. All the scrap material should be retained by the contractor.
2
159
318
... More
Dismantling of the existing switch accessories like switches, sockets, and MCBs, etc., as required.
5
4
20
... More
Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store.
5
9
45
... More
Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required.
5
24
120
... More
Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store.
5
60
300
... More
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
221
1105
... More
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
168
840
... More
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
5
71
355
... More
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Above 25 mm conduits.
5
7
35.25
... More
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Up to 25 mm conduit.
5
3
17.65
... More
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
1
2662
2662
... More
Less credit for the unserviciable items dismantled items during execution of the work.
-
-
-
... More
Assorted MCB TP AND TP&N & OTHER SWITCHGEAR
4
-10
-40
... More
Assorted PIANO Type Switches
20
-
-10
... More
Assorted PIANO Type Sockets
20
-1
-30
... More
Assorted Bell push/PIANO Type
10
-
-5
... More
Assorted Call bell buzzer single phase
10
-1
-10
... More
Assorted Brass batten/ angle holder/Brass Bracket
10
-2
-20
... More
Assorted Fan regulator/resistance type
10
-
-5
... More
Assorted Telephone Socket outlet
10
-
-5
... More
Assorted T.V. Socket outlet
10
-
-5
... More
Assorted Capacitor, 3.15/2.50/2.25 mfd
10
-
-5
... More
Assorted 1200/1400 mm sweep ceiling Fan with blades
10
-350
-3500
... More
Assorted Fresh Air FAN 200/250
10
-150
-1500
... More
Assorted Exhaust fan 300/380/450
10
-250
-2500
... More
Assorted Wall Bracket Fittings
10
-5
-50
... More
Assorted fluorescent Light Fittings
10
-5
-50
... More
Assorted Bulk Head Fittings
10
-15
-150
... More
Less credit for the dismantled Copper wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-150
-1500
... More
less credit for the dismantled aluminium wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-35
-350
... More
Assorted metal switch box.
20
-2
-40
... More
Assorted MCB DB SPN with out MCBs
20
-15
-300
... More
Assorted MCB DB TPN with out MCBs
20
-20
-400
... More
Assorted MCB SP
20
-5
-100
... More
Assorted MCB DP
20
-7
-140
... More
Assorted MCB TP AND TP&N
4
-10
-40
... More
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 4,17,611/-
1
4176
4176.11
... More
Add Difference in GST of(18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 4,17,611/- (DSR) + 4176.11 (L/Cess) = 4,21,787.11
1
26699
26699.12
... More
Less COST INDEX on DSR(E) @ - 2.73 % i.e Rs. 4,17,611/- (DSR) + 4176.11 (L/Cess) + Rs. 26,699.12 (GST difference) = Rs. 4,48,486.23
1
-12243
-12243.67
... More
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 4,17,611/- (DSR) + 4176.11 (L/Cess) + Rs. 26,699.12 (GST difference) + 36,235.46 (DSR Civil) - 12,243.67 (Cost Index) = Rs. 4,72,478.02
1
-12756
-12756.91
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements