National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 3,84,401Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Arm Of Station Hqr Building At Nsg Manesar (sh Civil And Electrical Maintenance) For The Year 2024-25.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_836248_1Tender No
39/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
1:2:4 (1 cement : 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
104.32
7878
821885.12
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
89.32
6518
582241.35
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
24.5
749
18357.85
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
34.63
9045
313254.32
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
13.11
10852
142282.17
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
284.76
392
111668.63
Suspended floors, roofs, landings, balconies and access platform
16
927
14836
Shelves (Cast in situ)
22.68
927
21030.03
Lintels, beams, plinth beams, girders, bressumers and cantilevers
87.13
736
64162.53
Columns, Pillars, Piers, Abutments, Posts and Struts
38.4
961
36913.92
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
50
208
10427.5
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
5760
107
621216
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6(1 cement :6 coarse sand)
56.47
7132
402758.16
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6(1 cement : 6 coarse sand)
100.71
9105
917060.22
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias Jambs and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqnn
5
5413
27067.5
Area of slab over 0.50 sqm
105.8
5136
543420.54
Providing and fixing 1st quality ceramic glazed wall tiles of size 600 x 300 or more conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
141.24
1267
179085.26
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
8.4
2392
20098.26
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
300x16 mm
10
303
3032.5
250x16 mm
20
260
5212
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10 mm
10
115
1151.5
200x10 mm
10
99
997
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
100 mm
20
59
1191
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
Twin rubber stopper
10
72
723.5
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
25
570
14273.75
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856, complete as per direction of Engineer-in-charge.
8.4
4488
37707.18
Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete.
-
-
-
With 12 mm mild steel U beading
54.4
1228
66803.2
Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds
-
-
-
Casement Window with Double Rebate Frame with two Side Hung Glazed Panel and two Side Hung wire mesh Panel and Fixed Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel.
-
-
-
Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above) x (55 mm & above) & mullion (55 mm & above) x (65 mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre)
38.72
20576
796714.34
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
500
133
66850
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
9245
194
1797228
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
5189
172
895621.4
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
200
772
154480
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
-
-
-
4.0 mm thick glass panes
10
1064
10646.5
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).
-
-
-
Dark shade pigment using ordinary cement
24
1119
26868
Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
Size of Tile 600 x 600 mm
84.05
1464
123120.64
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400 mm of all colours and shades.
137.31
3623
497604.57
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
120
377
45288
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
20
136
2723
Single tee with door
-
-
-
110x110x110 mm
10
234
2341.5
Single tee without door
-
-
-
110x110x110 mm
20
221
4427
Bend 87.5°
-
-
-
110 mm bend
40
150
6014
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
20
371
7426
Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
54.91
1355
74446.98
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm or more as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
494.92
738
365572.66
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm or more as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500- 600mm)
85.2
532
45356.22
Flashings/ Aprons.( Upto 600 mm)
38
485
18452.8
12 mm cement plaster of mix: (Including height upto 10 Mtr)
-
-
-
1:6 (1 cement: 6 coarse sand) (Including height upto 10 Mtr)
1000
343
343650
15 mm cement plaster on rough side of single or half brick wall of mix: (Including height upto 10 Mtr)
-
-
-
1:6(1 cement: 6 coarse sand)
800
395
316280
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: (Including all heights)
-
-
-
New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
1600
171
273760
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives (Including all heights).
-
-
-
New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
1000
181
181250
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : (Including all heights)
-
-
-
Two or more coats on new work
500
155
77950
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete (Including all heights).
1500
156
234075
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete (Including all heights).
1000
19
19750
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade (Including all heights).
-
-
-
Old work (one or more coats applied @ 0.83 Itr/10 sqm).
3000
88
265650
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge (Including height upto 10 Mtr).
-
-
-
With cement mortar 1:4 (1cement: 4 coarse sand)
500
560
280250
Dismantling W.C. Pan of all sizes including disposal of dismantled materials including malba all complete as per directions of Engineer-in-Charge.
4
134
536.4
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (Lead within campus) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall
100
3
325
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
2
1503
3007.2
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material lead within Campus as per direction of Engineer - in- charge.
1
3551
3551.25
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material lead within Campus as per direction of Engineer-in-charge.
-
-
-
In cement mortar
1
2060
2060.2
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking lead within Campus :
-
-
-
Of area 3 sq. metres and below
20
367
7344
Dismantling tile work in floors and roofs laid in cement mortar including stacking material lead within Campus.
-
-
-
For thickness of tiles 10 mm to 25 mm
40
73
2936
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material lead within Campus :
-
-
-
100 mm dia pipe
50
78
3900
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground lead within Campus.
600
54
32790
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
11.7
10117
118375.92
Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in- charge.
-
-
-
Made of G.I. wire of dia 4 mm
300
1017
305340
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50 mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
-
-
-
80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
390
1091
425685
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
2
6767
13534.8
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
2
6515
13031.1
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap
2
2226
4452.7
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :
-
-
-
Kitchen sink with drain board
-
-
-
510x1040 mm bowl depth 178 mm
1
6917
6917.2
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
32 mm dia
20
103
2078
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.
4
1607
6431.8
Providing and fixing PTMT Bottle Trap for Wash basin and sink.
-
-
-
Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms
4
375
1502.6
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
2
7979
15958.4
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
20 mm nominal dia Pipes
100
537
53760
25 mm nominal dia Pipes
50
627
31362.5
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
-
-
-
15 mm dia nominal bore
50
366
18320
20 mm dia nominal bore
30
437
13119
25 mm dia nominal bore
50
551
27585
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
4
622
2489.6
20 mm nominal bore
4
539
2159.8
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
20 mm nominal bore
4
462
1850
25 mm nominal bore
4
464
1856.2
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
15 mm nominal bore
20
97
1955
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
20 mm nominal bore
5
346
1734
25 mm nominal bore
5
439
2196.25
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
10
506
5068
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
10
798
7989.5
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
10
574
5743
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
30
74
2244
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
100 mm nominal dia
10
37
376
125 mm nominal dia with 25 mm waste hole
10
51
518.5
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
2707
10830.6
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
300 mm dia. R.C.C. pipe
50
994
49715
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
12770
25541.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
225
530
119452.5
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
168.75
634
107063.44
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
65.65
1505
98819.66
Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer- in-charge.
-
-
-
With stainless steel cover plate minimum 1.25 mm thickness
6
2823
16943.1
Providing and fixing machine moulded aluminium covering of approved pattern & design, made out of machine cut aluminium sheet and machine holed for receiving dash fastener, over expansion joints on vertical surfaces/ceiling floors, the fixing on plate in one row on one side of joint only shall be done with stainless steel dash fasteners of 8 mm dia and 75 mm long bolt including providing aluminium washers 2 mm thick & 15 mm dia , at a staggered pitch of 200 mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge.
-
-
-
Powder coated aluminium sheet 2.5 mm thick (minimum thickness of powder coating 50 micron)
10
716
7164
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment).
300
638
191505
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
5.04
5325
26842.54
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
126
1684
212259.6
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
323.77
1852
599638.23
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
Frame size 65 x 100 mm
52
1111
57787.6
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
35 mm thick
21
5432
114089.85
Cost of DSR items = Rs. 1,47,23,814.42 A Deduct GST Factor on DSR-2023 Items @ total of DSR rates - 0.973 of DSR rates) i.e 1,43,26,271.43 - 0.973 A = Rs. 3,97,542.99
1
-397542
-397542.99
Providing and fixing Pressmatic valve of approved quality conforming to IS standards and weighing not less than 500 gms.
5
1216
6081.65
Providing and placing in position up to floor five level micro concrete of approved brand and manufacturer which shall be cement based prepacked single component chloride free, no shrink, free from self compacting, ready to use after mixing water in soecified proportion as per manufacturer specification and direction of engineer-in-charge (payment under this item shall be made only after prepare wet curing has been done and surface has been satisfactroly evaluted by sundries/taping with blunt a metallic instrument)
1
39336
39336
Providing and fixing GI chicken wire mess at junction of brick work and RCC work including screw /nails etc complete. (Including height up to 10.0 Meter)
20
140
2814.8
Providing & fixing of 06mm thick both side High pressure Interior compact laminate , fundermax, Trespa.These are EN 438-Part 6 complying panels which are manufactured by high pressure and temperature in a hot press. The core of the panel consists of desired numbers of imported, long fibre virgin kraft papers, impregnated with specially formulated double hardened Phenolic resin and another top layer of imported virgin Blue wool scale passed, decorative paper layer impregnated with melamine resin. The panels are flame retardant type class 1 as per BS:476 Part 7, ASTM E84 and EN 438-Part 6. HPL panels have a tested Flexural Modulus of ≥ 11,000 MPa and Flexural strength of ≥ 100 MPa which makes the product enormously sturdy from inside. This product shows no distortion in extreme climatic changes such as from -20°C to +80°C or from dry climate to a relative humidity in excess of 85% - 90%. HPL panels pass a 3000 hours artificial weathering and are rated with a 5 for Grey scale rating & 7/8 for Blue wool rating. This material has antibacterial and anti fungal properties and density is 1.45gm/cm3 with 10 years warranty the cladding system will be installed on aluminium box section 25x38x1.5mm (P/F aluminium box section shall be paid in respective item). Installation will be done via rivets/adhesive and 3M tape all complete as per direction of engineer in charge.
30
3445
103350
Textured finish by providing Rustic Textured exterior plaster (Asian paints Apex Duracast Swiriltex or equivalent) of thickness 1.50-2.0 mm applied over old surface prepared by scrapping and applying wall putty and primer etc. and finishing with two or more coats of Acrylic Weather Proof exterior emulsion paint with sillicon additive of required shade on the surface. The rates shall include all materials and labour etc. for all heights complete and as per direction of Engineer-in-charge. This item includes the following operations: 1. Applying one coat of Rustic Textured Exterior plaster of synthetic intermediate finish designed with high quality exterior durable acrylic modified resin and special quality quartz (Asian paints Apex Duracast Swirltex or equivalent) using steel trowel finished to generate texture pattern as approved by Engineer-in-charge (Consumption of material shall not be less than 2.69 kg/sqm or as per manufactured specification whichever is more). 2.Applying exterior wall primer over Rustic Textured Plaster as prepared in Step-1 (Consumption of material shall not be less than 0.10 litre/sqm or as per manufacturer specification whichever is more). 3.Applying two or more coats of Preminium Acrylic Weather Proof Exterior Emulsion Paint with silicone additive over Rustic Textured Plaster as prepared in Step-1 as mentioned above in required colour and shade as approved by Engineer-in-charge. (Consumption of material shall not less than 0.167 litre/sqm or as per manufacturer specification whichever is more)
1000
406
406130
Providing and fixing Blinds of contour shape shear serier of vista make or equivalent all complete as per direction of Engineer-In -Charge
50.48
9142
461488.16
Supply and fixing of mat polish finished 10 seater meeting table of rectanguar shape, wire management with 03 nos socket box with flip cover Wire entry system Through legs, leg type understructure. Material of table top Prelaminated MDF board conforming to grade II and type II of IS:14587/latest, Material of legs /Gable end Prelaminated MDF board conforming to grade II and type II of IS: 14587/latest, Material of modesty panel Prelaminated MDF board conforming to grade II and type II of IS: 14587/latest. DIMENSION: Length/Diameter/Major axis of tabletop 1500 mm, Width/Minor axis of tabletop 1200 mm, Thickness of top ±2(mm) 25 mm, Table height in mm (±5 mm) 750 mm, Thickness of Gable end 19 mm, Thickness of legs material 1.6 mm, of required colour all complete of approved make as per direction of Engineer -In -Charge.
1
117310
117310
Supply of Revolving Chair with Synchronic tilt mechanism (THRILL MESH BACK CHAIR), 3 Position locking mechanism Seat, Revolving mechanism Designed with 360 degree, Height adjustments Pneumatic/Hydraulic, Glass filled nylon of Pedestal base, with castor, Nylon material of Twin wheel castor 5 nos of twin wheel castor / Studs, Minimum 50 mm diameter of twin wheel castor, Minimum thickness 2mm (in mm) of MS Plate Joining the backrest with seat of the chair. Seat base material Hot pressed plywood Seat material PU foam of Density of PU used in seat 40=50 (kg per cubic meter), Thickness of PU used in seat (mm) 40=50, Minimum seat height from floor surface (mm) 400=500, Seat height adjustment (mm) 95 millimeter, Width of seat (mm) 500, Depth of seat (mm) 500, Seat upholstery material Polyester fabric of required clour, Flexi Backrest type, backrest height Fixed, Backrest support type Adjustable lumber support, Backrest base frame material Injection moulded plastic, Width of backrest (mm) 500, Backrest height from the seat level 550, Backrest upholstery material Mesh fabrics. ARMREST- PU - Polyurethane Adjustable (up and down ) Armrest, seat colour Black all complete of approved make as per direction of Engineer -In -Charge.
10
11438
114380
Electrical
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
25
1015
25375
Group C
20
1467
29340
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
-
-
-
Group A
5
574
2870
Group C
5
894
4470
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
5
649
3245
Group C
15
858
12870
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
40
334
13360
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
45
537
24165
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
10
233
2330
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
10
439
4390
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
10
570
5700
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
3 X 1.5 Sq.mm
20
95
1900
3 x4 Sq.mm
20
206
4120
6 x4 Sq.mm
20
396
7920
3 X 6 Sq.mm
20
304
6080
3 X 10 Sq.mm
20
514
10283.2
2 X 10 + 1 X 6 Sq.mm
20
451
9037.8
4 X 10 + 2 X 6 Sq.mm
20
890
17804.2
1 x 4 Sq.mm
10
85
850
Providing and fixing Din-rail 35 mm x 7.5 mm on exisitng panel etc., as required. i) Din-rail 35 mm x 7.5 mm
2
378
756
Supplying and fixing of G.I Saddles 23 mm x 1.5 mm on following size PVC / steel conduit/ cable / pipe etc as reqd. (Astral, Prayag, Ashirvad, Finolex, or as approved by the engineer-in-charge)
i) 50 mm
15
38
570
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
20
128
2560
25 mm
20
145
2900
32 mm
20
184
3680
50 mm
5
284
1420
Supplying and installing the following size PVC trunking cable management system, complete with front cover, internal/external/flat angles, joints, junctions, end caps, and finishing accessories, etc. as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
100 x 50
120
1544
185280
32 X 12.5
20
310
6200
Supplying and fixing of following sizes module frame on existing trunking including arranging the cover making good the same as original complete etc. as required.
(Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
1-3 Module Frame
17
200
3400
4-5 Module Frame
2
239
478
8 Module Frame
17
388
6596
Supplying and installing following sizes of Hot Dipped
Galvanised Iron floor trunking (galvanisation thickness not less than 50 microns) with GI top cover, GI fixing brackets and joined with couplers/connectors on the existing floor trench etc. as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
100 mm width X 38 mm depth X 1.6 mm thickness
10
1651
16510
Supplying and fixing of following sizes of Joint Sleeve for GI Junction boxes ( 1.6 mm thick GI sheet ) with base & cover plate in existing metal raceway sytem and anchoring it to the flooring etc as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
100 mm width X 38 mm depth X 1.6 mm thickness
20
717
14340
Supplying and fixing of following sizes of GI Junction boxes ( 1.6 mm thick GI sheet ) with base & cover plate in existing metal raceway sytem and anchoring it to the flooring etc as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
150 x 150
20
2677
53540
Supplying and fixing of following sizes of GI Horizontal Access Outlet Box ( 1.6 mm thick GI sheet ) with base & cover plate in existing metal raceway sytem and anchoring it to the flooring etc as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
150 x 150 mm - 8 Module
5
6619
33095
Supplying and fixing of following sizes of GI Vertical Access Box ( 1.6 mm thick GI sheet ) with base & cover plate in existing metal raceway sytem and anchoring it to the flooring etc as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
250 X 200 x 45 mm.
5
3192
15960
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
50
592
29600
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Bends" with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
4
1441
5764
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee " with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended/fixed from the ceiling / wall /floor with G.I. suspenders/ G.I. angle iron brackets including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
4
1480
5920
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
10
669
6690
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
4
1159
4636
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mmX75mm)
2
298
596
3 Module (100mmX75mm)
2
327
654
4 Module (125mmX75mm
2
343
686
6 Module (200mmX75mm)
1
402
402
8 Module (125mmX125mm)
1
454
454
12 Module (200mmX150mm)
1
547
547
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amp switch
35
103
3605
15/16 amp switch
10
156
1560
3 pin 5/6 A socket outlet
35
122
4270
6 pin 15/16 A socket outlet
10
197
1970
25 Amp Socket
10
359
3590
25 Amp Switch
10
290
2900
Telephone socket outlet
10
109
1090
LAN Socket Outlet
10
292
2920
Supplying and fixing two module stepped type electronic modular fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
369
3690
Supplying and fixing two module stepped type electronic piao fan regulator on the existing phenolic cover plate switch box including connections but excluding cover plate etc. as required.
5
333
1665
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
-
-
-
5/6 amps switch
5
52
260
15/16 A switch
2
121
242
3 pin 5/6 A socket outlet
2
69
138
6 pin 15/16 A socket outlet
2
137
274
Supply & Fixing suitable size GI Box with modular plate and cover in front on surface or in reccess including provising and fixing 6 pin 5/6 and 15/16 amps moduler socket outlet and 15/16 amps moduler switch connection ect. as required.
26
586
15236
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
15
680
10200
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
5
477
2385
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 16 A modular socket outlet and 16 A/25 A SP MCB, "C" curve including connections, painting etc. as required.
( For Geyser)
10
763
7630
Supplying and fixing suitable size GI/ PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 6 pin 15/16 A modular socket outlet and 2 nos. 15/16 A modular switch, connections etc. as required.
5
975
4875
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
5
87
435
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
1
133
133
3 Module
1
151
151
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
40
400
Providing and fixing a metallic louvred shutter suitable for following sizes exhaust fan, the louvres should be able to open when the fan is on and close when the fan is turned off, on the existing opening on the wall, etc., as required.
-
-
-
300 mm
1
242
242
380 mm
1
1034
1034
450 mm
1
1331
1331
Providing and fixing 3 mm thick PVC/ phenolic laminated round sheet cover with a minimum of 170 mm dia on the existing fan box with two screws, etc., as required.
5
31
155
Providing and fixing 3 mm thick PVC / phenolic laminated round sheet cover on the existing junction box with two screws, etc., as required.
5
12
60
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
5
110
550
Supplying and fixing suitable size GI box in recess, including providing and fixing of 3/4 Module LED Foot light / skirting light, including connection etc. as required.
2
881
1762
Supplying and fixing two module Buzzer on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
327
654
Supplying and fixing two module bell/ chime on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
510
1020
Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
46
230
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
52
260
Supplying and fixing PRCD (Portable Residual Current Device) Plug top, 16 A 30 mA rating including connection etc. as required.
2
777
1554
Supplying and fixing Plug top 16 A 3/6 Pin Plug top rating including connection etc. as required.
2
123
246
Supplying and fixing Plug top 6 A 3/6 Pin Plug Top rating including connection etc. as required.
2
100
200
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
2
563
1127.8
Supplying and fixing of 20 mm size PVC Saddles with base and screws on existing PVC / steel conduit etc as reqd (Precision / AKG /Polycab /Finolex / Anchor/ GM)
10
16
160
Supplying and fixing of 25 mm size PVC Saddles with base and screws on existing PVC / steel conduit etc as reqd (Precision / AKG /Polycab /Finolex / Anchor/ GM)
10
17
170
Supplying and fixing 2 way, 60 Amp, two way connectors on the existing looping box including connection etc as required.
10
107
1070
Supplying and fixing Bakelite Sheet with screw in the existing looping box/Panel including cutting the sheet to required shape and size complete etc as reqd.
-
-
-
6 mm thick
0.5
4317
2158.5
Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Ventil Air or with similar specifications C&G / Orient / Usha / Almonard)
1
2285
2285
Supplying and installation of following size PVC Exhaust fan with louver shutter in the existing opening, including making good the damage, connection, testing , commissioning etc as required.
-
-
-
200 mm sweep in size
1
2282
2282
250 mm sweep in size
4
2433
9732
Supplying and installation of following sweep, 1400 RPM heavy-duty, single phase, metallic exhaust fan Conforming to IS:2312 -1967 in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Turbo force Heavy Duty Exhaust Fan or with similar specifications C&G / Orient / Usha / Almonard)
-
-
-
300 mm sweep
2
5070
10140
380 mm sweep
1
6010
6010
Making holes of the required size and shape in a brick masonry wall for installation of the following size exhaust fan, including making good the wall by plastering and finishing with the matching surface, etc., complete as per the direction of the engineer-in-charge.
-
-
-
225 mm /230 mm sweep
2
237
474
250 mm sweep.
2
188
376
450 mm sweep.
2
490
980
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 400 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
3
624
1872
Supply and installation of following sweep size, 220 V, wall mounted fan along with speed regulator unit for speed control, on the existing wall, including connection, testing, commissioning etc. as required. (Make: Atomberg /Crompton/Havells/Orient/Usha/Bajaj/Almonard)
-
-
-
400 mm sweep
9
3122
28098
Supply and installation of 600 mm sweep, 230 V, 1440 RPM, 100 Watt, AIr Delievery1 150 M3/min, 3 Blade ( Range may vary as per IS Code) heavy duty wall mounted fan on the existing wall, including connection, testing, commissioning etc. as required. (Make: Crompton/Havells/Orient/Usha/Bajaj/Almonard)
4
12153
48612
Cutting a hole of the required size and shape on the window or ventilator glass pane for the installation of an exhaust fan of size up to 150 mm sweep, etc., complete as per the direction of the engineer-in-charge.
1
118
118
Supply, installation, testing and commissioning of surface mounted LED downlighter luminaire in metallic housing, with a minimum system lumen output of 1500 lumen and with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required.
5
2433
12165
Supply, installation, testing, and commissioning of recess 10 Watt LED downlighter , with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling, including connections, earthing, etc. as required.
20
1286
25720
Supply, installation, testing, and commissioning of 48 Watt, 2A ( 5 Mtr ) LED strip lights with IP 20 ratings, 140 V - 270 V in warm white colours, with provision for the driver , complete with connection, etc., as required.
20
215
4300
Supply, installation, testing, and commissioning of driver for above item i.e. 48 Watt, 2A ( 5 Mtr ) LED strip lights with IP 20 ratings, 140 V - 270 V in warm white colours, including the driver , complete with connection, etc., as required.
4
777
3108
Supply, installation, testing and commissioning of 10 wattTrack Mounted Warm White LED light, IP 43, with Pressure Die-cast aluminium housing and complete with PC diffuser, LED module, electronic driver and all other accessories, having PF 0.9, THD15%, CRI80 minimum system luminous efficacy of 90 lm/W, on existing street light pole/gate including connection etc. as required. Make:- Havells, UNECOTRACKLIGHTTS10WLED830S15WHT
6
2197
13182
SITC of Stainless Steel Air Ventilator with with CFM of around 1700, no. of blades 39-42(thickness 0.4mm), Belly Dia 28", Neck Dia 24" with Fiber Base (3’x3’) matching with existing roofing sheet complete with cutting of existing plain fiber sheet along with installation of ventilator with self taping screw with Fiber sealing using glass fiber mat, GP Resin, catalyst and cobalt complete etc. as required.
4
5866
23464
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty of Atomberg/ Usha/ Orient / Havells /Bajaj/Crompton make)
15
3372
50580
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6, Air delivery minimum 170 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty)
1
3225
3225
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED recessed Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, suitable for recessed mounting, Armstrong/grid/POP/GB ceiling complete with all accessories, diffuser and electronic driver, directly on the ceiling, including connections and earthing etc. as required.
8
3543
28344
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
20
851
17020
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 4000 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
5
1409
7045
Supply, installation, testing, and commissioning of LED bulkhead fittings with IP 66 ingress protection, with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature of 5500K–6500 K, average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser, electronic driver, etc. as required directly on the wall, including connections, etc. as required
10
1654
16540
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
5
618
3090
Supply, installation, testing and commissioning of wall-mounted light fixture complete with B22/ E27 base, metal base in Nickel / Brass finishing with diffuser and 9 watts LED blub etc., as required directly on the wall, including connections etc. as required. ( Havells FLORETINE WL 1 LS or similar in Wipro/Philips/Jaquar/LT as approved by the Engineer -in- charge)
1
1240
1240
Supplying & Fixing of 2 to 4 watt LED wall light as bed light etc required as per direction of engg-in-charge.
1
1272
1272
Supplying, installation, testing, and commissioning 100 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)
1
8129
8129
Supplying, installation, testing, and commissioning 200 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)
4
9664
38656
Supply, installation, testing and commissioning of 25 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
1
5194
5194
Supply, installation, testing and commissioning of 45 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. (Warm WHite/ Cool White as per decision of Engineer-in-Charge)
Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
24
7332
175968
Supplying, installation, testing, and commissioning of 10 to 11 Watt, .6 Metre (nominal size) LED Bollard Light fitting complete with LED module, electronic driver, diffuser, and all other accessories, minimum system luminous efficacy of 80 lm/W, the bollard housing should be made up of metallic pipe duly powder coated with the mounting flange at the bottom,
-
-
-
including providing 3 nos M10 foundation bolts, two numbers 32 mm. dia PVC pipe for cable entry (from the bottom of the foundation to the top of the foundation for cable entry), and providing the foundation of Cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size ) of size 0.3-metre dia and 750 mm height (250mm above ground and 500 mm below ground) including excavation as required and complete with connections, lugs, terminals, connectors for the connection of cable and wires in the fitting etc., complete as required. (Make Havells /Philips /Wipro as per sample approved by Engineer -in - Charge)
4
6330
25320
Supplying, installation, testing, and commissioning of 10 to 11 Watt, 1 Metre (nominal size) LED Bollard Light fitting complete with LED module, electronic driver, diffuser, and all other accessories, minimum system luminous efficacy of 80 lm/W, the bollard housing should be made up of metallic pipe duly powder coated with the mounting flange at the bottom,
-
-
-
including providing 3 nos M10 foundation bolts, two numbers 32 mm. dia PVC pipe for cable entry (from the bottom of the foundation to the top of the foundation for cable entry), and providing the foundation of Cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size ) of size 0.3-metre dia and 750 mm height (250mm above ground and 500 mm below ground) including excavation as required and complete with connections, lugs, terminals, connectors for the connection of cable and wires in the fitting etc., complete as required. (Make Havells /Philips /Wipro as per sample approved by Engineer -in - Charge)
39
9338
364182
Supplying, installation, testing and commissioning of 45 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 100 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
2
3495
6990
Supplying, installation, testing, commissioning & erection of 3 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet,
-
-
-
including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont
1
18609
18609
Supplying, installation, testing, commissioning & erection of 6 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet,
-
-
-
including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont
1
23468
23468
Supply and installation of round bracket (ring type) suitable for mounting four floodlights. The round bracket should be made of 40 dia. (nominal bore) B-Class G.I. pipe on the periphery and four supports (spokes) of 40 mm B-Class G.I. pipe duly welded with a pole cap of 300 mm length at the centre. The pole cap should be of suitable dia for mounting on an existing polygonal pole with a top dia. of 70 mm. The dia. of the round bracket should not be less than 120 cm. The bracket pipes should be suitable for acting as conduits for wires for the wiring of floodlights. The pole cap should have four holes and four numbers of G.I. nuts and bolts for fixing the bracket on the top of the polygonal pole. (drawing will be get approved before fabrication )
1
4163
4163
Painting of street light pole of Height upto 3 Mtr with 2 or more coats of synthetic enameld paint of suitable shade as approved by engineer-in-charge including scrapping, finsihing the surface, applying a coat of red-oxide and finally numbering the pole Black & Yellow colour paint as per directions of engineer-in-charge etc compelte as reqd.
1
337
337
Supplying & fixing of Water Pressure Pump (booster pump) 1 HP, 4 Stage, single phase, 220 volt, Automatic ON and OFF Operation Monoblock motor pump set having suction X delivery size 32 mm X 25 mm, head up to 36 m, tank capacity 24 litre, complete as required. (Model no KSB KHM0404 KSB make)
1
35648
35648
Supplying, installation, testing & commisioning of 0 .5 HP / 0.37 KW, single phase, self priming Monoblock motor pump set having Thermal Overload Protector (TOP), IP-44 protection and class 'B' insulation. Suction X delivery size 25 mm X 25 mm and head range 2600 to 500 LPH discharge at 6 to 30 mtr complete with foundation bolt et., as required. (Crompton Minimaster Plus II of similar in CRI/ texmo /KSB/ Kirloskar /Crompton make)
1
12452
12452
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.(Also to be Grout In Cement Concrete)
10
125
1257.5
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
20
256
5120
Double pole
1
656
656
Triple pole
1
1007
1007
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
10
13
130
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way (4 + 24), Double door
1
5967
5967
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
1
1340
1340
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
(Note : DB should be suitable for RCCB/RCBO as incomer.)
-
-
-
8 way , Double door
1
2573
2573
16 way , Double door
1
3141
3141
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required
-
-
-
For 8 way, Double door SPN MCBDB
1
832
832
For 14/16 way, Double door SPN MCBDB
1
902
902
Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required.
1
1621
1621
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
100 A, 16 KA/18KA/ 25KA, TPMCCB
1
3777
3777
100 A,30KA,FPMCCB
1
7377
7377
200 A,36KA,FPMCCB
1
15206
15206
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
1
1592
1592
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
4
13
52
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
40 A Double pole
1
1160
1160
63 A Double pole
1
1160
1160
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A Triple pole and neutral
1
2221
2221
63 A Triple pole and neutral
1
2221
2221
Fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 to 16 way, Double door
1
468
468
Supplying and fixing PVC weatherproof, IP66, 16 A, 240 V, switch and Socket box, IP66, complete with one 16 A switch and socket on surface or in recess, complete with connections, testing and commissioning etc. as required.
10
3391
33910
Supplying and fixing 4 module MCB DB with DIN railway, single pole and neutral, PVC Weatherproof IP65, MCB distribution board, 240 volts, on surface/ recess, complete with din bar etc. as required. (But without MCB/RCCB/Isolator).
1
2259
2259
Supplying and fixing 8 module MCB DB with DIN railway, single pole and neutral, PVC Weatherproof IP65, MCB distribution board, 240 volts, on surface/ recess, complete with din bar etc. as required. (But without MCB/RCCB/Isolator).
1
3012
3012
Supplying and fixing a PVC cable gland suitable for following size copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required.
-
-
-
Up to 6 sq mm
1
22
22
Supplying and fixing a PVC cable gland suitable for following size copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required.
-
-
-
For 2 x 10/ 16
1
52
52
For 2 x 18/25
1
69
69
Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium armoured conductor power cable 1.1 KV grade of following size in the existing RCC/ HUME/ STONEWARE/ METAL/ DWC pipe as required.
-
-
-
2 X 16 Sq.mm
110
290
31900
3.5 X 35 Sq.mm
50
531
26550
3.5 X 120 Sq.mm
120
1482
177840
Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium armoured conductor power cable 1.1 KV grade of following size in Masonry Open Duct Loose/loop/in panel etc. complete etc as required.
-
-
-
2 X 16 Sq.mm
10
280
2800
3.5 X 35 Sq.mm
50
520
26000
3.5 X 120 Sq.mm
50
1464
73200
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 16 sq. mm (22mm)
4
256
1024
3.5 X 35 Sq.mm (32 mm)
4
369
1476
3.5 X 120 Sq.mm (45 mm)
2
613
1226
Supply and drawing of 3 x 2.5 sq mm PVC insulated, FRLS PVC sheathed copper conductor multi core flexible cable into the existing street light pole, DWC Pipe / loose as per requirement including making connections at one end with the street light fitting fixed to the top of the pole and the other end with the control gearbox, including drawing out the burnt-out wires from the pole if required, etc. as required.
30
166
4980
Supply and drawing of 3 x 1.5 sq mm PVC insulated, FRLS PVC sheathed copper conductor multi core flexible cable into the existing street light pole, DWC Pipe / loose as per requirement including making connections at one end with the street light fitting fixed to the top of the pole and the other end with the control gearbox, ( including drawing out the burnt-out wires from the pole if required), complete etc. as required.
10
113
1130
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required
-
-
-
50 mm dia nominal bore
20
536
10720
80 mm dia nominal bore
10
803
8030
100 mm dia nominal bore
10
1806
18060
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
40 mm dia ( OD- mm & ID- mm Nominal)
125
203
25375
63 mm dia ( OD-63 mm & ID-51 mm Nominal)
50
247
12350
120 mm dia (OD-120 mm & ID-103 mm nominal)
150
368
55200
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
2
585
1170
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.
2
1477
2954
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
0.5
8340
4170.43
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
1
1503
1503.6
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
-
-
-
Bituminous portion
0.5
5032
2516.13
The road crossings of power cable through trenchless boring. Trenchless boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 150 mm dia DWC HDPE / G.I. /PVC
20
651
13020
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 75 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 1600G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
3
2578
7734
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 100 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
2
3813
7626
Supply, Installation, Testing and commissioning of outdoor type totally enclosed, dust and vermin proof, pedestal mounted INSPECTION BOX / JUNCTION BOX of a suitable size but not less than 600 mm wide X 600 mm height X 450 mm (deep) fabricated from 2 mm thick CRCA sheet steel having front and back openable doors with locking arrangement on both sides, tapered top (roof), including detachable cable gland plates made of 3 mm thick CRCA sheet, including pre-paint treatment, phosphating and powder coating by approved Siemens grey paint, consisting of 500 Amps 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC / SMC bus bar supports at required intervals, etc. as required, suitable for operation on 433 volts, 50 Hz, 3-phase, 4-wire A.C. supply system, the entire panel shall have one common G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs or terminals, a danger notice plate fixed, etc., complete as required. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground)..
2
15917
31834
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with the required front area (but not less than 0.54 sqm) and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 200 amps, 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC/SMC bus bar supports at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring from busbars to switch gears and up to terminal blocks with suitable sized solid aluminium strips,
-
-
-
the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common aluminium/G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 125.01-125.130 (The drawing will be approved before the fabrication of the panel.)
1
31694
31694
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
Red Phase indication LED lamps.
1
152
152
Yellow Phase indication LED lamps.
1
152
152
Blue Phase indication LED lamps.
1
246
246
2 Amp SPMCB, BB10020C
1
440
440
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete selector switch - 1 Set.
1
3466
3466
Insulated Tape Wound CTs 400/5 A amps, 15VA withAccuracy class 0.5, 5P10 in existing cubicle panel board including making connections and teting etc,. as required.
3
1912
5736
100-125 Amp 4 pole, 25 Ka (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No.
1
12426
12426
250. Amp 4 pole, 25 Ka (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No.
2
21638
43276
80. Amp 4 pole, 25 Ka (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No.
1
9914
9914
160. Amp 4 pole, 25 Ka (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No.
1
19050
19050
320. Amp 4 pole, 36 Ka (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No.
1
28871
28871
Direct Rotary Handel, DN0 CM97895OOOO for 80 Amp .
1
1211
1211
Direct Rotary Handel, DN0 CM98040OOOO for 125, 160, 250 Amp.
4
1287
5148
Direct Rotary Handel, DN0 CM99861OOOO for 320 Amp
1
3053
3053
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with the required front area (but not less than 0.54 sqm) and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 200 amps, 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC/SMC bus bar supports at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring from busbars to switch gears and up to terminal blocks with suitable sized solid aluminium strips,
-
-
-
the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common aluminium/G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 127.01-127.12
( For Kendriya Vidyalaya)
(The drawing will be approved before the fabrication of the panel.)
1
31694
31694
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
Red Phase indication LED lamps.
1
152
152
Yellow Phase indication LED lamps.
1
246
246
Blue Phase indication LED lamps.
1
246
246
2 Amp SPMCB, BB10020C
1
440
440
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete selector switch - 1 Set.
1
3466
3466
Insulated Tape Wound CTs 400/5 A amps, 15VA withAccuracy class 0.5, 5P10 in existing cubicle panel board including making connections and teting etc,. as required.
3
1912
5736
250 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
2
21638
43276
80 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
9914
9914
320 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
28871
28871
Direct Rotary Handel, DN0 CM97895OOOO for 80 Amp .
1
1211
1211
Direct Rotary Handel, DN0 CM98040OOOO for 125, 160, 250 Amp.
4
1287
5148
Direct Rotary Handel, DN0 CM99861OOOO for 320 Amp
1
3053
3053
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with the required front area (but not less than 0.54 sqm) and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 200 amps, 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC/SMC bus bar supports at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring from busbars to switch gears and up to terminal blocks with suitable sized solid aluminium strips, the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common aluminium/G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 129.01-129.12
( For OTA Building)
(The drawing will be approved before the fabrication of the panel.)
1
31694
31694
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
Red Phase indication LED lamps.
1
152
152
Yellow Phase indication LED lamps.
1
152
152
Blue Phase indication LED lamps.
1
246
246
2 Amp SPMCB, BB10020C
1
440
440
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete selector switch - 1 Set.
1
3466
3466
Insulated Tape Wound CTs 400/5 A amps, 15VA withAccuracy class 0.5, 5P10 in existing cubicle panel board including making connections and teting etc,. as required.
3
1912
5736
250 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
21638
21638
80 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
9914
9914
320 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
28871
28871
Direct Rotary Handel, DN0 CM97895OOOO for 80 Amp .
1
1211
1211
Direct Rotary Handel, DN0 CM98040OOOO for 125, 160, 250 Amp.
4
1287
5148
Direct Rotary Handel, DN0 CM99861OOOO for 320 Amp
1
3053
3053
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Three Pole
1
1007
1007
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single Pole
6
256
1536
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with as per requirement and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 200 amps, 4 strip copper bus bars with heat-shrinkable coloured sleeves, bus bar support at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring with 16 sq.mm copper flexible cable., the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common copper bar of size 20 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 133
(The drawing will be approved before the fabrication of the panel.)
0.54
53246
28752.84
Providing and fixing following switch gears, meters and accessories in existing cubicle panel board including drilling holes in cubicle panel, making connections, testing etc. as required. 63 Amps , FP, MCCB, 25 KA breaking capacity , Ics = 100% Icu with Adjustable overload and fixed short-circuit protection, Spreaders Terminals and Direct Rotary handle. (Incomer)
1
10434
10434
3Ph LED Ammeter Cl 1 with Inbuilt selector switch for 3 phases.
1
1156
1156
3Ph LED Voltmeter Cl 1 (0-500V) with Inbuilt selector switch for 3 phases.
1
1156
1156
CTs 100/ 5 amps, 5VA with class 1.0 accuracy.
3
627
1881
LED Indicator Red, 240V AC.
1
152
152
LED Indicator Yellow, 240V AC.
1
152
152
LED Indicator Blue, 240V AC.
1
246
246
240 VAC Astronomical digital time switch DIN Mounting type
1
3451
3451
6 amps, 10 KA, 240 V, "C" curve SP MCB
3
296
888
3 Pole, 415 V, Power Contactor AC3 duty Rating 40 A.
1
4416
4416
Auto manual switch .
1
288
288
5 A to 32 A, 10 KA, 240 V, "C" curve DP MCB. (OUTGOING)
6
656
3936
Supplying and fixing 320 amps rating, 240/415 volts, CO3-315, Type 315 Amp, Changeover with Sheet Steel Enclosure, complete with terminal shrouds, source separator, Phase barriers, staggered Terminals complete with connections, testing and commissioning etc. as required.
(Make:- L&T, CO3-315 Type , CO33150OSOO)
2
21918
43836
Supplying, installation, testing and commissioning of 2 Ton, Inverter type, 5 Star BEE rating, Hi-wall Split type Air conditioner complete suitable for operation on 230 V, 50 Hz single phase AC supply, with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit with copper pipe wrapped with insulation, Drain pipe and connecting cable, copper Condenser and Evaporator Coil, remote control, user manual with warranty certificate as per OEM specifications). i) Connecting copper pipes and cable length 3 mtrs.
ii)Warranty : minimum 1 Year on complete Unit, PCB warranty 5 Years and 09 Years on Compressor.
iii) Cooling capacity (100%) as per BEE label : 6200 Watt minimum
iv) Rated ISEER : minimum 5
v) The AC should be designed to work at a maximum operating ambient temperature of up to 52 degrees Celsius (outdoor temperature).
(Daikin / Blue star / O' General / Mitsubishi/ Voltas/ Carrier )
4
79400
317600
Providing & fixing of refrigerant copper piping with insulation and wire for 2 ton Split AC as per manufacturers specification , clamps, etc. complete as reqd. ( two copper pipes one suction and one discharge line with wire and foam insulation tubing will be measured as one unit)
10
1027
10270
Supply, Installation, testing and commissioning of wall mounted type voltage stabilizer suitable for 2.0 Ton Split Air conditioner with High / Low voltage cut off, thermal overload relay and Time Delay Relay, WORKING VOLTAGE RANGE : 150-285 Volts including connection etc. as required. (V-Guard make-Model VND 500 or similar of Totaline / Logicstat / Microtek/Luminous / Bluebird with minimum 3 year warranty.)
4
5469
21876
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
40 mm
40
228
9120
Providing, Fxing & Cmmissioning of 65" LED TV with features as mentioned below, Power Supply AC220-240V~ 50/60Hz, Power Consumption (Stand-by) 0.50 W, Power Consumption (Max) 440 W, Auto Power Saving, Energy Efficiency Class 1 Picture Resolution 4K, Contrast OLED, Processor NQ4 AI Gen2 NQ4, AI Upscaling- 4K AI Upscaling, PANTONE® Validated , 100% Colour Volume, OLED HDR +, Real Depth Enhancer, EyeComfort Mode. Sound Output- 40W, 2.1Ch, Dolby Atmos, Q-Symphony, Object Tracking Sound Lite, Active Voice Amplifier Pro, Adaptive Sound Pro, Speaker Type 4.2.2CH, Smart Technologies- Built-in IoT Hub (SmartThings), AI Energy Mode,Motion Xcelerator 144 Hz, SolarCell Remote, Bixby & Alexa Built-in, Far-Field, Multi View , Tap View , Samsung TV Plus, Knox Security, Designed with One Connect Box + Invisible Cable , Laser Slim Screen , 4 Side Bezel- Less, 4- HDMI, 3 USB-A, 1- USB-C, Package Size (WxHxD) 1.62 m x 93.50 cm x 17.00 cm, with Stand, 9:16 Screen Support, complete with commissioning & testing complete as required.
Extended Warranty of 3- Year.
( Make:- Samsung, Model:- 1.63 m S95D OLED 4K Smart TV
Or Same or Higher Specs in LG, Sony)
1
184437
184437
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
20
6855
137100
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
40
287
11480
Providing and fixing 6 SWG dia GI Wire on surface or in reccess for loop earthing alongwith existing surface/ reccess conduit / sub main wiring / cable as reqired.
50
42
2100
Providing & Fixing 25mmx5mm GI strip on surface or in reccess for connections etc. as required.
20
244
4880
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
8
518
4144
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclo sure with cover plate having locking arrangement and wa tering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
7472
29888
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required.
10
113
1130
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required.(For horizontal run)
20
126
2520
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
20
197
3940
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
2
121
242
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
5
195
975
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)
5
80
400
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
5
162
810
Rewinding of following size ceiling fan / exhaust fan/ Wall fan motor including complete removal of existing burnt out winding and rewinding of the fan with suitable size enameled copper wire, including sleeving, suitable insulation materials, varnishing etc., complete with dismantling and reassembling after repair, including connection testing etc. as required. Removed winding wire shall be retained by the contractor and suitably credited with its value and net value to be quoted.
-
-
-
1200mm Sweep ceiling fan
4
657
2628
1400mm Sweep ceiling fan
1
690
690
Wall Fan upto 400 mm
1
733
733
300mm / 380 mm exhaust fan
1
1057
1057
450 mm exhaust fan
1
1493
1493
Providing and replacing ball bearing in following size ceiling fan/exhaust fan, including removing old ball-bearing, installing new ball bearing and testing the fan, etc., as required. (Scrap material will be retained by the contractor). (Both side shield ball bearing of SKF/ NBC /TATA )
-
-
-
1200/1400mm Sweep ceiling fan.
10
182
1820
450 mm exhaust fan.
1
196
196
Providing and replacing the 2.5 MFD/3.15 MFD fan capacitor in the ceiling fan/exhaust fan/wall fan, including connection and testing, etc., as required. (The old capacitor will be retained by the contractor).
10
46
460
Providing and replacing the 4 MFD fan capacitor in the ceiling fan/exhaust fan/wall fan, including connection and testing, etc., as required. (The old capacitor will be retained by the contractor).
5
55
275
Reconditioning of the oversized bush bearing housing to a suitable ball bearing in the ceiling fan/ exhaust fan/ wall-mounted fans as required and assembling and testing of the fan after repair. All the scrap material should be retained by the contractor.
2
170
340
Providing and replacing the worn-out M.S. shaft of the exhaust fan /wall fan with a suitable size new shaft etc., as required, including removing the old shaft, installing the new shaft, and testing the fan. All the scrap material should be retained by the contractor.
2
163
326
Dismantling of the existing switch accessories like switches, sockets, and MCBs, etc., as required.
5
4
20
Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store.
5
9
45
Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required.
5
24
120
Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store.
5
60
300
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
221
1105
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
168
840
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
5
71
355
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Above 25 mm conduits.
5
7
35.25
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Up to 25 mm conduit.
5
3
17.65
Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.
2
2662
5324
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
1 Pair
35
31
1085
2 Pair
30
38
1140
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
1 run of cable
30
57
1710
2 run of cable
30
96
2880
Less credit for the unserviciable items dismantled items during execution of the work.
-
-
-
Assorted MCB TP AND TP&N & OTHER SWITCHGEAR
4
-10
-40
Assorted PIANO Type Switches
20
-
-10
Assorted PIANO Type Sockets
20
-1
-30
Assorted Bell push/PIANO Type
10
-
-5
Assorted Call bell buzzer single phase
31
-1
-31
Assorted Brass batten/ angle holder/Brass Bracket
15
-2
-30
Assorted Fan regulator/resistance type
10
-
-5
Assorted Telephone Socket outlet
10
-
-5
Assorted T.V. Socket outlet
10
-
-5
Assorted Capacitor, 3.15/2.50/2.25 mfd
10
-
-5
Assorted 1200/1400 mm sweep ceiling Fan with blades
10
-350
-3500
Assorted Fresh Air FAN 200/250
10
-150
-1500
Assorted Exhaust fan 300/380/450
10
-250
-2500
Assorted Wall Bracket Fittings
10
-5
-50
Assorted fluorescent Light Fittings
15
-5
-75
Assorted Bulk Head Fittings
10
-15
-150
less credit for the dismantled Copper wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-150
-1500
less credit for the dismantled aluminium wire wires from light points/ circuit/ submain/power circuit wiring,.
8
-35
-280
Assorted metal switch box.
21
-2
-42
Assorted MCB DB SPN with out MCBs
25
-15
-375
Assorted MCB DB TPN with out MCBs
25
-20
-500
Assorted MCB SP
20
-5
-100
Assorted MCB DP
20
-7
-140
Assorted MCB TP AND TP&N
4
-10
-40
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 6,12,177/-
1
6121
6121.77
Add Difference in GST of(18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 6,12,177/- (DSR) + 6,121.77 (L/Cess) = 6,18,298.77
1
39138
39138.31
Less COST INDEX on DSR( E ) @ -2.73 % i.e Rs. 6,12,177/- (DSR) + 6,121.77 (L/Cess) + Rs. 39,138.31 (GST difference) = Rs. 6,57,437.08
1
-17948
-17948.03
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 6,12,177/- (DSR) + 6,121.77 (L/Cess) + Rs. 39,138.31 (GST difference) + 10,575.46 (DSR Civil) - 17,948.03 (Cost Index) = Rs. 6,50,064.51
1
-17551
-17551.74
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%