National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 3,82,402Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_826915_1Bid Award Id
ViewTender No
26/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1:1.5:3 (1 cement : 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).
1.67
17297
10357.55
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
43.7
32744
749.3
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
... More
1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
6.01
54364
9045.75
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
... More
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
1.08
11721
10852.95
... More
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
... More
Foundations, footings, bases of columns, etc. for mass concrete
12.96
5082
392.15
... More
Lintels, beams, plinth beams, girders, bressumers and cantilevers
14.4
10604
736.4
... More
Columns, Pillars, Piers, Abutments, Posts and Struts
14.4
13842
961.3
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
901.5
97226
107.85
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
... More
Thermo-Mechanically Treated bars of grade Fe-500D or more.
162
17471
107.85
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
... More
Cement mortar 1:6(1 cement :6 coarse sand)
3.02
21539
7132.25
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
... More
Cement mortar 1:6(1 cement : 6 coarse sand)
31.94
290844
9105.95
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
... More
Cement mortar 1:4(1 cement :4 coarse sand)
40
44952
1123.8
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
... More
Area of slab upto 0.50 sqnn
24.8
134254
5413.5
... More
Area of slab over 0.50 sqm
18.78
96459
5136.3
... More
Providing and fixing 1st quality ceramic glazed wall tiles of size 600x300 mm or more conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
57
72273
1267.95
... More
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete:
-
-
-
... More
25 mm dia
24
12613
525.55
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
... More
250x16 mm
12
3127
260.6
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
200x10 mm
24
2392
99.7
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
... More
100 mm
24
1429
59.55
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
... More
Twin rubber stopper
12
868
72.35
... More
Providing and fixing magnetic catcher of approved quality in cupboard/ ward robe shutters, including fixing with necessary screws etc. complete.
-
-
-
... More
Triple strip vertical type
50
2625
52.5
... More
Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge,
20
8284
414.2
... More
Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately)
50
1020
20.4
... More
Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds
-
-
-
... More
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
-
-
-
... More
Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).
27
293603
10874.2
... More
Providing and fixing stainless steel sof closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge.
50
13600
272
... More
Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge,
20
17702
885.1
... More
Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in- charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately)
300
159975
533.25
... More
Providing and fixing 2 mm thick 16 to 19 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per direction of Engineer- in-charge.
200
8760
43.8
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
... More
Hot finished welded type tubes
525
102060
194.4
... More
Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
... More
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
... More
Size of Tile 600 x 600 mm
11.07
16215
1464.85
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
-
-
-
... More
Size of Tile 600x600 mm
11.07
3421
309.05
... More
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400 mm of all colours and shades.
203.35
736930
3623.95
... More
Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.
-
-
-
... More
Polished Granite stone slab of colour Black, Cherry/Ruby Red or equivalent
20
89626
4481.3
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
... More
Coupler
-
-
-
... More
110 mm
5
680
136.15
... More
Single tee with door
-
-
-
... More
110x110x110 mm
10
2341
234.15
... More
Single tee without door
-
-
-
... More
110x110x110 mm
5
1106
221.35
... More
Bend 87.5°
-
-
-
... More
110 mm bend
20
3007
150.35
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
... More
110 mm
5
1856
371.3
... More
Providing and fixing false ceiling at all heights including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50 mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25 mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, difusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :
-
-
-
... More
12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)
28.7
38911
1355.8
... More
12 mm cement plaster of mix:
-
-
-
... More
1:6 (1 cement: 6 coarse sand)
35.4
12165
343.65
... More
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
... More
1:6(1 cement: 6 coarse sand)
224.6
88795
395.35
... More
Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives.
-
-
-
... More
New work (Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
544.64
98716
181.25
... More
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
544.64
255381
468.9
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
703.95
109851
156.05
... More
6 mm plaster on cement concrete or reinforced cement concrete work with white cement based polymer modified self curing mortar of approved make as per the direction of Engineer-In-Charge.
100
26915
269.15
... More
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
150
2962
19.75
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within NSG campus per direction of Engineer - in - charge.
-
-
-
... More
Nominal concrete 1:4:8 or leaner mix (including equivalent design mix)
18.53
27861
1503.6
... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within NSG campus as per direction of Engineer - in- charge.
4
14205
3551.25
... More
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material withinNSG campus as per direction of Engineer-in-charge.
-
-
-
... More
In cement mortar
21.81
44932
2060.2
... More
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within NSG campus :
-
-
-
... More
Of area 3 sq. metres and below
40
14688
367.2
... More
Dismantling steel work in single sections including dismembering and stacking within NSG campus
-
-
-
... More
Channels, angles, tees and flats
260.4
598
2.3
... More
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within NSG campus
185.25
49359
266.45
... More
Demolishing mud phaska in terracing and disposal of material within NSG campus as directed by Engineer- in-charge.
47.55
43474
914.3
... More
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within NSG campus
400
21860
54.65
... More
Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in NSG campus as directed by Engineer- in-charge.
12.3
693
56.35
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete etc. as per direction of Engineer- in-charge (length of finished kerb edging shall be measured to calculate volume for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
3.24
32781
10117.6
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge.
-
-
-
... More
80 mm thick C.C. paver block of M-35 grade with approved colour design and pattern.
270
294705
1091.5
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
... More
Flexible pipe
-
-
-
... More
40 mm dia
5
597
119.55
... More
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
2
2167
1083.5
... More
Providing and fixing white vitreous china battery based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge.
2
15958
7979.2
... More
Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litre with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.
2
36425
18212.9
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
... More
15 mm nominal dia Pipes
50
24890
497.8
... More
20 mm nominal dia Pipes
30
16128
537.6
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
... More
25 mm nominal dia Pipes
100
35540
355.4
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
... More
25 mm nominal bore
4
1856
464.05
... More
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
... More
45 cm length
-
-
-
... More
20 mm nominal bore
5
595
119.05
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
... More
25 mm nominal bore
5
2196
439.25
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
1000
11000
11
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
... More
15 mm nominal bore
4
3282
820.7
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
... More
15 mm nominal bore
1
670
670.45
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
... More
15 mm nominal bore
7
4020
574.3
... More
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge.
10
748
74.8
... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
... More
250 mm dia. R.C.C. pipe
150
134970
899.8
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
... More
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
51082
12770.55
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
... More
L D- 2.5
-
-
-
... More
Rectangular shape 600x450 mm internal dimensions
4
5750
1437.65
... More
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).
450
181260
402.8
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately).
25.41
135331
5325.9
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
237.74
400496
1684.6
... More
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
... More
With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles.
185.25
353336
1907.35
... More
Chipping of unsound/weak concrete material from slabs, beams, columns etc. with manual Chisel and/ or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes etc. and disposal of debris for all lead and lifts all complete as per direction of Engineer-In-Charge
-
-
-
... More
50 mm average thickness
60
15381
256.35
... More
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
-
-
-
... More
Bars upto 12 mm diameter
50
412
8.25
... More
Bars above 12 mm diameter
50
822
16.45
... More
Providing, mixing and applying bonding coat of approved adhesive on chipped portion of RCC as per specifications and direction of Engineer- In-charge complete in all respect.
-
-
-
... More
SBR Polymer (@10% of cement weight) modified cementitious bond coat @ 2.2 kg cement per sqm of surface area mixed with specified proportion of approved polymer
60
8472
141.2
... More
Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75 mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).
-
-
-
... More
25 mm average thickness in 2 layers.
60
35241
587.35
... More
Providing, mixing and applying SBR polymer (of approved make @ minimum 2% by wt. of cement used) modified plain/reinforced cement concrete for structural members having minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria] with specified average thickness. Note: Rates shall be for finished surface area of concrete and shall include the cost of labour, concrete and appropriate approved Super-Plasticiser for rendering concrete as flowable and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/tapping with a blunt metal instrument)
-
-
-
... More
50 mm thick in Grade M25 with cement content not less than 330 kg per cum
60
34149
569.15
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
Frame size 45 x 85 mm
61.2
56692
926.35
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
... More
35 mm thick
22.68
113748
5015.35
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
-
-
-
... More
18 mm thick
54
161616
2992.9
... More
25 mm thick
34.44
133942
3889.15
... More
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain white color board for backing of cup boards and bathroom/kitchen cabinets etc. of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/ mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel screws etc. all as per direction of Engineer-In- Charge. (Note: stainless steel screws shall be paid separately)
-
-
-
... More
12 mm thick
34.44
58930
1711.1
... More
Providing and fixing CP Health Faucet (ABS Body) with 8mm Dia, 1.0 Meter Long Spirochrome flex tube & Wall Hook of catagery ALD-587 of Jaquar make or equavalent series of make Euronics, hindware, Parryware, all complete, as per direction of engineer in charge
2
2174
1087.13
... More
Providing and fixing Two way bib cock with wall flange vignette prime series Cat No. VGP-CHR-81041 of JAQUAR make or equivalent of Euronics paryware,hindware as approved by Engineer-in-Charge.
2
4773
2386.86
... More
Providing and fixing Soap Dish Holder of catagery ACN-1131N of Jaquar make or equavalent series of make Euronics, hindware, Parryware all complete, as per direction of engineer in charge
3
2389
796.44
... More
Credit for MS section like angle, tee, flats, grill etc.
500
-19500
-39
... More
Providing and fixing single lever Basin mixture of catagery OPP-15011BPM of Jaquar make or equavalent series of make Euronics, hindware, Parryware including painting of fittings and brackets, cutting and making good the walls wherever required:-
2
9071
4535.65
... More
Providing and fixing Towel Rack 600mm Long Without Lower Hangers but with 3 hooks, Stainless Steel of catagery ACN-1181FHS of Jaquar make or equavalent series of make Euronics, hindware, Parryware all complete, as per direction of engineer in charge
2
6135
3067.61
... More
Providing and fixing C.P. brass bib cock With Wall Flange of catagery FON-40037 of Jaquar make or equavalent series of make Euronics, hindware, Parryware 15mm nominal bore
5
9262
1852.52
... More
Providing and Fixing Glass shelf 600 mm long of JAQUAR make cat No. ACN-CHR-1171N or Euronics make cat. No. ACC06 or equivalent as per direction of Engineer-in-charge.
3
4115
1371.87
... More
Providing and Fixing on wall face unplasticidsed Rigid PVC rain water pipes confirming to IS: 13592 Type-B,including jointing with seal ring confirming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes with 6 kg/cmxcm Pressure. 110 mm diameter
50
21666
433.33
... More
15mm cement plaster on external wall surface of single or half brick wall of polymer modified ready mixed plaster of fine grade Portland, graded sand polymers with water soluble additives as per manufacturer specification of approved make and as per directions of Engineer- in charge.
350
192801
550.86
... More
Providing & fixing of 06 mm thick both side High pressure Interior compact laminate of approved quality and make (Century Exteria, fundermax, Greenlam, Merino, Trespa) These are EN 438-Part 6 complying Exteria panels which are manufactured by high pressure and temperature in a hot press. The core of the panel consists of desired numbers of imported, long fibre virgin kraft papers, impregnated with specially formulated double hardened Phenolic resin and another top layer of imported virgin Blue wool scale passed, decorative paper layer impregnated with melamine resin. The panels are flame retardant type class 1 as per BS:476 Part 7, ASTM E84 and EN 438-Part 6. HPL panels have a tested Flexural Modulus of ≥ 11,000 MPa and Flexural strength of ≥ 100 MPa which makes the product enormously sturdy from inside. This product shows no distortion in extreme climatic changes such as from -20°C to +80°C or from dry climate to a relative humidity in excess of 85% - 90%. HPL panels pass a 3000 hours artificial weathering and are rated with a 5 for Grey scale rating & 7/8 for Blue wool rating. This material has antibacterial and anti fungal properties and density is 1.45gm/cm3 with 10 years warranty the cladding system will be installed on aluminium box section 25x38x1.5mm (P/F aluminium box section shall be paid in respective item). Installation will be done via rivets/adhesive and 3M tape-complete as per direction of Engineering-in-charge
100
344300
3443
... More
Providing and fixing white vitreous china table top/counter top wash basin of catagery JDS-WHM-25907N of Jaquar make or equavalent series of make Euronics, hindware, Parryware with 32mm CP Brass Waste of standard pattern including making all connections : Italian collection as per direction of engineer in charge Table Top Basin, In White Matt of Size: 530x420x140 mm, Shape - Rectangular as per direction of engineer in charge all complete
3
26769
8923.27
... More
Providing and Fixing chromimum plated Bottle Trap 32mm Size with 250mm & 190mm Long Wall Connection Pipes & Wall Flange of as per approved make of selection with necessary coupling of approved make for wash basin and sink Model Equivalent to (Jaquar-ALD-769L250x190)
3
5566
1855.48
... More
Providing and Fixing in position of Flash touch-free infrared hand dryer with 1150W rated power & carbon brush motor Material: 304 Stainless Steel of Jaquar HDR-SSF-AK 2807 make or equavalent series of make Euronics, hindware, Parryware as per direction of Engineer In Charge.
3
29112
9704.33
... More
Providing and Fixing of factory finished cubicle Toilet of 12 mm thick comapct laminate HPL board of size 1000w x 1550D x 2100H mm and door size 1925 mm (H) x 600mm(W), bottom gap 100mm to 150 mm of the approved make and shade. Standard Accessories for cubicles are SS 304 grade (a) SS U channel, (b) SS F channel (only corner unit), (c) SS door stoper channel, (d) SS top rail, (e) SS coat hook, (f) SS privacy thumb turn c/w occupancy indicator (g) SS door knob (h) SS spring loaded butt hings with cover, (i) SS adjustable foot 316 garde, (j) Rubber lining for door stopper, (k) scews and wall plug (Note :- warpage criteria is 3.0 mm /1000mm for MRS panels as per EN standard 438) all complete including all type of fittings fixtures as per manufacturer specification and drawing of make Greenlam, Merino or equivalent.
3
155496
51832
... More
Providing and Fixing blinds of contour shape sheer series of Vista make or equivalent make of required colour, shape, and size all complete as per direction of Engineer - In - Charge.
32.4
296200
9142
... More
Providing & fixing of 06 mm thick both side High pressure Exterior Grade laminate of approved quality and make (Century Exteria, fundermax, Greenlam, Merino, Trespa ) These are EN 438-Part 6 complying panels, which are manufactured by high pressure and temperature in a hot press. The core of the panel consists of desired numbers of imported, long fibre virgin kraft papers, impregnated with specially formulated double hardened Phenolic resin and another top layer of imported virgin Blue wool scale passed, decorative paper layer impregnated with melamine resin. The panels are flame retardant type class 1 as per BS:476 Part 7, ASTM E84 and EN 438-Part 6. Poly-methyle methacrylate UV protecting films are provided at the top of the Deco layer for optimum UV protection (passes 1500Hrs). HPL panels have a tested Flexural Modulus of ≥ 11,000 MPa and Flexural strength of ≥ 100 MPa which makes the product enormously sturdy from inside. This product shows no distortion in extreme climatic changes such as from -20°C to +80°C or from dry climate to a relative humidity in excess of 85% - 90%. HPL panels are equipped with a maximum possible weather resistance at extreme oceanic climates as it has duly passed the salt spray test conducted for 500 Hours. HPL panels pass a 3000 hours artificial weathering and are rated with a 5 for Grey scale rating & 7/8 for Blue wool rating. Density is 1.45gm/cm3 with 10 years warranty the cladding system will be installed on aluminium box section 25x38x1.5mm (P/F aluminium box section shall be paid in respective item) with aluminium POP rivets are being used for fastening purpose (with appropriate sliding and fixed holes) complete as per direction of Engineering-in-charge.
270
1084320
4016
... More
Providing and laying heavy duty vitrified floor tiles premium matt/satin finish (anti-skid) for pavment/parking area of size 600x600x15mm of make Kajaria, Somany,johnson or equivalent with water absorption's less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick (average) cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete as per direction of Engineer-in-charge.
31.5
63756
2024
... More
Providing and fixing 12 mm thick frameless toughened glass of approved brand and manufacture, including providing and fixing arrangement and making necessary holes etc. for all complete as per direction of Engineer-in-charge
38.46
150993
3926
... More
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 800x2400 mm
200
34034
170.17
... More
Textured finish by providing Rustic Textured exterior plaster (Asian paints Apex Duracast Swiriltex or equivalent) of thickness 1.50-2.0 mm applied over old surface prepared by scrapping and applying wall putty and primer etc. and finishing with two or more coats of Acrylic Weather Proof exterior emulsion paint with sillicon additive of required shade on the surface. The rates shall include all materials and labour etc. for all heights complete and as per direction of Engineer-in-charge. This item includes the following operations:
1. Applying one coat of Rustic Textured Exterior plaster of synthetic intermediate finish designed with high quality exterior durable acrylic modified resin and special quality quartz (Asian paints Apex Duracast Swirltex or equivalent) using steel trowel finished to generate texture pattern as approved by Engineer-in-charge (Consumption of material shall not be less than 2.69 kg/sqm or as per manufactured specification whichever is more).
2.Applying exterior wall primer over Rustic Textured Plaster as prepared in Step-1 (Consumption of material shall not be less than 0.10 litre/sqm or as per manufacturer specification whichever is more).
3.Applying two or more coats of Preminium Acrylic Weather Proof Exterior Emulsion Paint with silicone additive over Rustic Textured Plaster as prepared in Step-1 as mentioned above in required colour and shade as approved by Engineer-in-charge. (Consumption of material shall not less than 0.167 litre/sqm or as per manufacturer specification whichever is more)specification whichever is more)
376
152242
404.9
... More
Providing and Fixing hatching of required pattern and design on 12 mm thick toughned glass (Fixed/shutter portion) etc all complete and design shall be approved by Engineer-in-Charge.
46.95
69908
1489
... More
Deduct GST Factor on DSR-2023 Items @ total of DSR rates x 0.973 - Total of DSR rates) i.e (58,53,860.78 x 0.973 = 56,95,806.54 - 58,53,860.78 = 1,58,054.24 (Variation Amt)
1
-158054
-158054.24
... More
Electrical
-
-
-
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
... More
Group C
127
186309
1467
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
... More
Group C
12
10296
858
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
2
3124
1562
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
... More
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
200
46600
233
... More
2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
20
5500
275
... More
4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire
200
82000
410
... More
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
180
60120
334
... More
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
100
53700
537
... More
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
60
45240
754
... More
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
60
60300
1005
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit/raceway/tray as required.
-
-
-
... More
3 x 1.5 sq. mm
20
1900
95
... More
6 x 1.5 sq. mm
60
10860
181
... More
3 X 2.5 sq. mm
50
6850
137
... More
6 X 2.5 sq. mm
150
39750
265
... More
9 X 2.5 sq. mm
100
41200
412
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
... More
20 mm
500
64000
128
... More
25 mm
260
37700
145
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
... More
15/16 A switch
28
4368
156
... More
3 pin 5/6 A socket outlet
84
10248
122
... More
Bell push
6
840
140
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
22
8118
369
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
1200
40
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
... More
1 or 2 Module (75mmX75mm)
35
10430
298
... More
3 Module (100mmX75mm)
2
654
327
... More
8 Module (125mmX125mm)
11
4994
454
... More
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
... More
1 or 2 Module
40
5320
133
... More
3 Module
2
302
151
... More
8 Module
7
1477
211
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
5
2385
477
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
19
11134
586
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
18
12240
680
... More
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
56
2912
52
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty of Atomberg/ Usha/ Orient / Havells /Crompton make)
23
77556
3372
... More
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE star rated, ceiling fan with 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,, Air delivery minimum 125 CMM, 380 RPM (tolerance as per IS: 374-2019), suitable to operate with electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
1
3225
3225
... More
Supply, Installation, Testing and Commissioning of 600 mm sweep, BEE star rated, ceiling fan with 3 nos. blades or more, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding,, Air delivery minimum 100 CMM, 800 RPM (tolerance as per IS: 374-2019), suitable to operate with electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
1
2812
2812
... More
Supplying and fixing two module Buzzer on the existing modular plate switch box including connections but excluding modular plate etc. as required.
1
1222
1222
... More
Supplying and fixing two module bell/ chime on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
786
393
... More
Supplying and fixing following modules, Pop-up type Flush -Mounting box complete with installation kit suitable for modular switches in recess on existing table/furniture etc. as required.
-
-
-
... More
4 Modules Pop-up type Flush -Mounting box (Matt Aluminium Finish)
21
69867
3327
... More
8 (2 x 4) Modules Pop-up type Flush -Mounting box (Matt Aluminium Finish)
32
220704
6897
... More
Supplying & fixing following modular switch / socket on the existing modular plate & switch box including connections but excluding modular plate etc. as reqd.
-
-
-
... More
Telephone socket outlet
23
3404
148
... More
RJ 45 UTP cat 5 tooless with shutter 1M
27
16659
617
... More
Preterminated sockets HDMI 1.4 - 1 module
7
38206
5458
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
2 Pair
300
11400
38
... More
4 Pair
50
2700
54
... More
Providig and fixing 100 Pair outdoor type Telecom Distribution box [nomina size 280 x 280 x 110 mm ABS Enclosure with waterproof IP6566 enclosure made from heavy duty ABS Enclosure with impact rating of IK07/08 having Inbuilt krone module frames fitted with modules including Suitable PG Glands for cable inlet and outlets etc complete as required. [Make- IDIS India or krone or D-link ]
-
-
-
... More
100 pair
1
3986
3986
... More
Supply and drawing UTP 4 pair Cat 6 LAN cable in the existing surface/ recessed steel / PVC conduit as required.
-
-
-
... More
1 run of cable
150
8550
57
... More
2 run of cable
100
9600
96
... More
3 run of cable
100
13400
134
... More
Supplying and fixing following sizes DLP U-PVC trunking with cover, separator partition and accessories (Joints, Angles, Bends, End Caps, Brackets, Junctions etc) on surface etc complete as required.
-
-
-
... More
105 mm x 50 mm (2 compartments)
60
90240
1504
... More
Supplying and fixing following sizes Clip-on supports alongwith finishing plates to be fitted side by side on existing DLP U-PVC trunking system to fecilitate installation of wiring accessories etc complete as required.
-
-
-
... More
2 modules-for 85 mm cover
16
3952
247
... More
4 modules-for 85 mm cover
6
1968
328
... More
6 modules-for 85 mm cover
11
4290
390
... More
Supplying and fixing Plug top of following rating including connection etc. as required. ISI marked [Make: Havells/Anchor /L&T/SSK/ MK]
-
-
-
... More
6 A, three pin, Plug top ISI marked
10
1000
100
... More
16 A, three pin, Plug top ISI marked
20
2460
123
... More
Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing MCCB DB including drilling holes in, making connections, etc. as required.
-
-
-
... More
63 A, 18/25 kA, FP MCCB
1
4685
4685
... More
100 A, 18/25 kA, FP MCCB
1
4685
4685
... More
Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board ofsheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar,din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)
-
-
-
... More
4 way (4 + 12), Double door
2
15024
7512
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) To be mentioned in Preferred list of makes
-
-
-
... More
4 way (4 + 12), Double door
1
4091
4091
... More
6 way (4 + 18), Double door
3
14922
4974
... More
8 way (4 + 24), Double door
3
17901
5967
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
Single pole
114
29184
256
... More
Triple pole and neutral
4
4912
1228
... More
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
... More
40 A Triple pole
2
3902
1951
... More
63 A Triple pole
2
3902
1951
... More
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..
-
-
-
... More
40 A Triple pole and neutral
1
2424
2424
... More
63 A Triple pole and neutral
1
2424
2424
... More
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB) having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
... More
40 A
5
15940
3188
... More
63 A
1
2872
2872
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required.
13
15197
1169
... More
Supplying and Laying of one number copper conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
4c x 6 sq. mm
50
38400
768
... More
Fabrication, supply, installation, testing & commissioning of indoor type Electrical panel of cubical construction, floor-mounted type, front facial area of 2.65 sqm, fabricated out of 2 mm thick CRCA sheet, with enclosure protection class IP 42, suitable for operation on 415-volt, 50 Hz, 3 phase, 4 wire A.C. supply system, dust and vermin proof, powder-coated in an approved siemens grey shade after 7 tank treatment processes, compartmentalized with hinged lockable doors, detachable cable gland plates made of 3 mm thick
-
-
-
... More
CRCA sheet, cable alleys of suitable size for cabling routing, openable type rear cover and complete with 4 strips of Aluminium bus bars of 400 Amps capacity with heat-shrinkable coloured sleeves and DMC/SMC bus bar supports at required intervals, control terminals, and suitable sized terminal blocks for incoming and outgoing cables, including providing and fixing interconnection with suitable sized solid aluminium strip/ bus Bar and control wiring with suitable sized insulated copper conductor cable.
-
-
-
... More
The entire panel shall have one common aluminium/ G.I. bar of size 20 mm x 5 mm at the rear with 2 earth studs/terminals. A suitable size M.V. Danger Board shall be fixed on the panel.The panel base should have four 300 mm long legs (made of angle irons 50 x 50 x 6 mm) to raise the panel from the floor. The base frame of the panel should be grouted into the floor with four bolts and nuts. The panel shall have provision to accommodate the following switch gears as mentioned below in serial number 42 and as per the drawing approved by the engineer-in-charge with the required front area and depth of 300 mm. (Drawings will be approved by the Engineer-in-Charge before fabrication of the panel).
-
-
-
... More
Providing and fixing following switch gears, meters and accessories in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
... More
200 A, 4 pole, On Load Changeover Switch with operating handle - 1 No.
-
-
-
... More
200 Amps , FP, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection with Spreaders Terminals. ( L&T/Legrand/ Siemens /ABB/ Schneider)- 1 Nos.
-
-
-
... More
Direct Rotary Handle (RHOM) for 200 A MCCB-1 Nos.
-
-
-
... More
100 Amps , TP, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection with Spreaders Terminals. ( L&T/Legrand/ Siemens /ABB/ Schneider)-4 Nos.
-
-
-
... More
Direct Rotary Handle (RHOM) for 100 A MCCB-4 Nos.
-
-
-
... More
80 Amps , TP, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection with Spreaders Terminals. ( L&T/Legrand/ Siemens /ABB/ Schneider)- 3 Nos.
-
-
-
... More
Direct Rotary Handle (RHOM) for 80 A MCCB
-
-
-
... More
3Ph LED Ammeter Cl 1 with Inbuilt selector switch for 3 phases. Flush mounting 96 x 96 mm. (L&T WL131010OOOO or similar in Conzerv, AE, Rishab, Secure) -1 Nos.
-
-
-
... More
3Ph LED Voltmeter Cl 1 (0-500V) with Inbuilt selector switch for 3 phases. Flush mounting 96 x 96 mm. (L&T WL132010OOOO or similar in Conzerv, AE, Rishab, Secure)- 1 Nos.
-
-
-
... More
CTs 200/5 A amps, 15 VA with class 1.0 accuracy. (AE /KAPPA/Trinity) 3 Nos.
-
-
-
... More
LED Indicator Red, 240V AC/ 24 DC. (L & T, Siemens, BCH, Telemecanique, Vaishnav, Kaypee/ESS-BEE) - 1 Nos.
-
-
-
... More
LED Indicator Yellow, 240V AC/24 DC. (L & T, Siemens, BCH, Telemecanique, Vaishnav, Kaypee/ ESS-BEE) - 1 Nos.
-
-
-
... More
LED Indicator Blue, 240V AC/24 DC. (L & T, Siemens, BCH, Telemecanique, Vaishnav, Kaypee / ESS-BEE) - 1 Nos.
-
-
-
... More
MCB SP, 10 KA, 2 AMP for Control circuit. ( L&T/Legrand / Siemens /ABB/ Schneider) - 3 Nos.
1
178545
178545
... More
Fabrication, supply, installation, testing & commissioning of Electrical panel of cubical construction with front facia of 1.82 sqm , double door, outdoor floor-mounted type, fabricated out of 2 mm thick CRCA sheet, with enclosure protection class IP 54, suitable for operation on 415-volt, 50 Hz, 3 phase, 4 wire A.C. supply system, dust and vermin proof, powder-coated in an approved siemens grey shade after 7 tank treatment processes, compartmentalized with hinged lockable doors, detachable cable gland plates made of 3 mm thick
-
-
-
... More
CRCA sheet, cable alleys of suitable size for cabling routing, openable type rear cover and complete with 4 strips of Aluminium bus bars of 400 Amps capacity with heat-shrinkable coloured sleeves and DMC/SMC bus bar supports at required intervals, control terminals, and suitable sized terminal blocks for incoming and outgoing cables, including providing and fixing interconnection with suitable sized solid aluminium strip/ bus Bar and control wiring with suitable sized insulated copper conductor cable.
-
-
-
... More
The entire panel shall have one common aluminium/ G.I. bar of size 20 mm x 5 mm at the rear with 2 earth studs/terminals. A suitable size M.V. Danger Board shall be fixed on the panel.The panel base should have four 300 mm long legs (made of angle irons 50 x 50 x 6 mm) to raise the panel from the floor. The base frame of the panel should be grouted into the floor with four bolts and nuts. The panel shall have provision to accommodate the following switch gears as mentioned below in serial number 42 and as per the drawing approved by the engineer-in-charge with the required front area and depth of 300 mm. (Drawings will be approved by the Engineer-in-Charge before fabrication of the panel).
-
-
-
... More
Providing and fixing following switch gears, meters and accessories in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.
-
-
-
... More
320 Amps , FP, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Microprocessor base overload and short-circuit protection with Spreaders Terminals. ( L&T/Legrand/ Siemens /ABB/ Schneider) - 1 No.
-
-
-
... More
Extended Direct Rotary Handle (RHOM) for 320 A MCCB
-
-
-
... More
Digital Multi-function meter Cl 1 with Inbuilt selector switch for 3 phases. Flush mounting 96 x 96 mm. (L&T WL131010OOOO or similar in Conzerv, AE, Rishab, Secure) - 1 No.
-
-
-
... More
CTs 320/5 A amps, 15 VA with class 1.0 accuracy. (AE /KAPPA/Trinity) - 1 No.
-
-
-
... More
LED Indicator Red, 240V AC/ 24 DC. (L & T, Siemens, BCH, Telemecanique, Vaishnav, Kaypee/ESS-BEE) - 1 No.
-
-
-
... More
LED Indicator Yellow, 240V AC/24 DC. (L & T, Siemens, BCH, Telemecanique, Vaishnav, Kaypee/ ESS-BEE)- 1 No.
-
-
-
... More
LED Indicator Blue, 240V AC/24 DC. (L & T, Siemens, BCH, Telemecanique, Vaishnav, Kaypee / ESS-BEE)- 1 No.
-
-
-
... More
MCB SP, 10 KA, 6 AMP for Control circuit. ( L&T/Legrand / Siemens /ABB/ Schneider)- 3 Nos.
-
-
-
... More
250 Amps , FP, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Thermal Magnetic release base overload and short-circuit protection with Spreaders Terminals. ( L&T/Legrand/ Siemens /ABB/ Schneider) - 3 Nos.
-
-
-
... More
Direct Rotary Handle (RHOM) for 250 A MCCB- 3 Nos.
-
-
-
... More
160 Amps , FP, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Thermal Magnetic release base overload and short-circuit protection with Spreaders Terminals. ( L&T/Legrand/ Siemens /ABB/ Schneider)- 3 Nos.
-
-
-
... More
Direct Rotary Handle (RHOM) for 160 A MCCB- 3 Nos.
-
-
-
... More
1 spare compartment
-
-
-
... More
Bottom Base Channel
-
-
-
... More
Bottom base channel of MS section not less than 40 mm x 40 mm x 5 mm thick for entire bottom view of panel and legs atleast 300 mm above ground after grouting in CC foundation
-
-
-
... More
Foundation
-
-
-
... More
PCC 1:2:4 foundation with excavation, ramming of sides etc as required
1
291945
291945
... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
3.5c x 240 sq mm
650
1807000
2780
... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose for connections etc as required.
-
-
-
... More
3.5c x 240 sq mm
50
137800
2756
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. , complete as required.
-
-
-
... More
160 mm dia (OD-160 mm & ID-135 mm nominal)
650
312650
481
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
... More
160 mm dia (OD-160 mm & ID-135 mm nominal)
50
18050
361
... More
Providing, installation, testing & commissioning of 'Silent type' outdoor diesel generating set having prime power rating of 82.5 KVA, 415 V at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor and consisting of the followings :
-
-
-
... More
Diesel Engine :
-
-
-
... More
Diesel engine 4 stroke water cooled, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & 1000 Mtr MSL conforming to BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories.
-
-
-
... More
Engine mounted instrument panel fitted with & having digital display for following:
-
-
-
... More
Start-stop switch with key
-
-
-
... More
Water temperature indication
-
-
-
... More
Lubrication oil pressure indication
-
-
-
... More
Battery charging indication
-
-
-
... More
RPM indication
-
-
-
... More
Over speed indication
-
-
-
... More
Low lub. Oil trip indication
-
-
-
... More
Engine Hours indication
-
-
-
... More
Alternator :
-
-
-
... More
Synchronous alternator rated at 82.5 KVA, 415 V at 1500 RPM, 3 phase, 50 Hz., AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & 1000 Mtr MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS : 4722 / BS 2613 suitable for tropical conditions and with class - F/H insulation.
-
-
-
... More
Base Frame :
-
-
-
... More
Both the engine and alternator shall be mounted on suitable existing base frame made of MS channel with necessary reinforcement which shall be installed on suitable existing cement concrete foundation & vibration isolation arrangement as per recommendations of manufacture.
-
-
-
... More
Fuel Tank :
-
-
-
... More
Fuel tank shall be as per manufacuturers standard.
-
-
-
... More
Exhaust System :
-
-
-
... More
Dry exhaust mainfold with residential exhaust silencer.
-
-
-
... More
Starting System :
-
-
-
... More
12 V DC starting system comprising of starter motors : voltage regulator & arrangement for initial excitation complete arrangement for initial excitation complete with suitable No. of batteries as reqd. as per recommendations of manufacture.
-
-
-
... More
CPCB IV approved accoustic & weather proof enclosure with arrangement for fresh air intake for cooling of the engine and alternator, extraction, discharging hot air in to the atmosphere as per specifications.
-
-
-
... More
DG set should have power command microprocessor based integrated, generator set monitoring, metering, protection & control system with built in Torque matched voltage / HZ overload control
1
1646004
1646004
... More
Fabrication, supply, installation, testing & commissioning of OUTDOOR TYPE (IP 54) automatic mains failure control panel of suitable size to accommodate following accessories, floor-mounted type, fabricated out of 2 mm thick CRCA sheet, suitable for 82.5 KVA silent type DG set, dust and vermin proof, powder-coated in an approved Siemens grey shade, compartmentalized with hinged lockable doors, detachable cable gland plates made of 3 mm thick CRCA sheet, openable type rear cover and complete with 4 strips of aluminium bus bars of 300 Amps capacity with heat-shrinkable coloured sleeves and DMC/SMC bus bar supports at required intervals, control terminals, and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnection with suitable sized aluminium conductor cable/solid aluminium strip and control wiring with suitable sized insulated copper conductor cable. The entire panel shall have one common GI bar of size 20 mm x 5 mm at the rear with two earth studs or terminals.
-
-
-
... More
AMF Panel to be fixed on an MS angle iron base frame of size 75 mm x 75 mm x 8 mm thick with 400 mm long legs. Legs shall be grouted into the floor with bolts and nuts, and an apron plate of 2 mm thick sheet shall be provided on all four sides of the base frame. (Drawings will be approved before fabrication of the panel.)
The AMF panel should be complete with the following accessories, i.e., relays, timers, sets of CTs for metering and protection, energy analyser to indicate current, phase and line voltages, frequency, power factor, KWH, KVARH, and provision for overload, short circuit, restricted earth fault, under frequency, and control cabling from the AMF panel to the DG Set and elsewhere if required, all complete with accessories and interlocking, including the following:
-
-
-
... More
3 Nos. 160 Amps 36 KA, FP MCCB (with spreader links) thermo-magnetic OC, SC based release & 2 Nos. 250/255 Amp, 4 Pole, AC1 duty power contactor with 2NO+2NC.
-
-
-
... More
Auto/Manual/Test/Off Selector Switch
-
-
-
... More
Main supply failure monitor with over voltage relay, under voltage relay, S.P.P & P.R.R for main supply- 1 set
-
-
-
... More
6 Sets of current transformers 15 P 10 for accuracy & protection and 6 set of current transformer 15 VA class-I for metering
-
-
-
... More
VAF meter, CL-1, 415V, 3PH- 1 No.
-
-
-
... More
Energy analyser unit to indicate current voltage frequency power factor & KWH.
-
-
-
... More
Indicating lamps for load on mains and load on set
-
-
-
... More
SPMCB for indication, metering system & control circuit
-
-
-
... More
Battery charger SMPS based with float and boost charging facility
-
-
-
... More
Digital micro controller based AMF Relay having facility : DG Auto start with 3 start facility with site selectable no. of crank, crank time, crank delays, DG under voltage, over voltage, over current, short circuit, unbalance voltage & current setting, Energy (KWH), Voltage, current frequency measurement, DG run , Alarm, DG event recording with date & time stamp.
-
-
-
... More
Audio/Video annunciation for
-
-
-
... More
(i) High water temperature or as per OEM standards
-
-
-
... More
(ii) Low lubricating oil pressure
-
-
-
... More
(iii) Engine over speed
-
-
-
... More
(iv) Engine fails to start
-
-
-
... More
(v) Full load/maximum load warning
-
-
-
... More
DG protection required are : controller voltage, 12V/24V DC.Display for DG running parameters like DG start/Stop, PB, DG Auto/Manual facility.
1
278702
278702
... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
... More
3.5 x 70 sq. mm
30
28710
957
... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose for connections etc as required.
-
-
-
... More
3.5 x 70 sq. mm
10
9430
943
... More
Supplying, Laying and fixing of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following sizee on wall/cable tray surface with saddle/metallic tie etc as required.
-
-
-
... More
3.5 x 70 sq. mm
25
25625
1025
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
30
7440
248
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
120 mm dia (OD-120 mm & ID-103 mm nominal)
20
7360
368
... More
The road crossings of power cable through trenchless boring.
Trenchless horizontal boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 200 mm dia DWC HDPE / G.I. /PVC
50
32550
651
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
150
100350
669
... More
150 mm width X 50 mm depth X 1.6 mm thickness
60
42960
716
... More
300 mm width X 50 mm depth X 1.6 mm thickness
30
28890
963
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “bends” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
16
18544
1159
... More
150 mm width X 50 mm depth X 1.6 mm thickness
16
20320
1270
... More
300 mm width X 50 mm depth X 1.6 mm thickness
6
11112
1852
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Tee” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
8
10616
1327
... More
150 mm width X 50 mm depth X 1.6 mm thickness
8
11064
1383
... More
300 mm width X 50 mm depth X 1.6 mm thickness
3
6468
2156
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray “Cross member” (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
... More
100 mm width X 50 mm depth X 1.6 mm thickness
8
10616
1327
... More
150 mm width X 50 mm depth X 1.6 mm thickness
8
11064
1383
... More
300 mm width X 50 mm depth X 1.6 mm thickness
3
7098
2366
... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
6
41130
6855
... More
Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
27676
13838
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
2
14944
7472
... More
Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)
30
29160
972
... More
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.
1800
91800
51
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
50
3500
70
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
30
21180
706
... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.
20
11700
585
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
... More
3½ X 70 sq. mm (35mm)
4
1872
468
... More
3½ X 300 sq. mm (70mm)
4
4780
1195
... More
Supply, installation, testing and commissioning of Recess mounted LED 2'x2' luminaire with DALI enabled driver delivering system lumen 3450 lumens & the luminaire shall be with system efficacy ≥ 115 Im / W. Housing: CRCA powder coated white, Diffuser/Optics: PMMA/PS UGR 19 IP20 Protection. The operating CCT shall be ≥5700K with CRI of ≥80. with input voltage range of 150 to 270V THD ≤ 10% & PF ≥ 0.95, Life-50,000 Hrs LED Life with L70 Criteria. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer. [Make- LT Model No. FULLLIT CR PANEL LIGHTS RECESS30W 5700K CCT NON DIM WHITE (PC) STANDARD or equivalent in Havells/Regent/Phillips]
12
86988
7249
... More
Supply, installation, testing and commissioning of Recess mounted LED 2'x2' luminaire delivering system lumen 3450 lumens & the luminaire shall be with system efficacy ≥ 115 Im / W. Housing: CRCA powder coated white, Diffuser/Optics: PMMA/PS UGR 19 IP20 Protection. The operating CCT shall be ≥5700K with CRI of ≥80. with input voltage range of 150 to 270V THD ≤ 10% & PF ≥ 0.95, Life-50,000 Hrs LED Life with L70 Criteria. The LED shall be SMD type. Luminaire shall have minimum surge protection of 2.5KV. The luminaire shall be with following certifications: LM79 & LM80 issued by LED manufacturer. [Make- LT Model No. FULLLIT CR PANEL LIGHTS RECESS30W 5700K CCT NON DIM WHITE (PC) STANDARD or equivalent in Havells/Regent/Phillips]
28
143500
5125
... More
Supply, installation, testing and commissioning of 10 to 12 W recess mounted DALI enabled LED downlighter luminaire in metallic housing, with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, complete with all accessories, PC diffuser following the LG7 guidelines for minimum light transmission and electronic driver, directly on ceiling, including connections and earthing etc. as required. [Make-Lighting Technologies LT Model No. Moon V2 LG7 or equivalent in Phillips/Havells/Wipro]
16
86928
5433
... More
Supply, installation, testing and commissioning of recess mounted back-lit diecast aluminium downlight 15w 4000k (Square Light) neutral white, CRI 80, 230 V constant current driver, 70% of luminous flux after 50,000 operating hours, Housing made-up PDC Aluminium with PS Diffused cover, Powder coated using Nano Technology, System efficacy-100 LPW P.F0.95, THD5%, Protection
class-I, IP20. The operating CCT shall be ≥5700K with CRI of 80. input voltage range of 150 to 270V, THD ≤ 10% & PF 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED shall be SMD type. Luminaire shall have minimum inbuilt surge protection of 2.5KV & External
upto 4KV. The luminaire shall be with following certifications: NABL certified inhouse LAB LM79 & LM80 issued by LED manufacturer. [Make-Lighting Technologies LT Model No. Dice Recess 15W or equivalent in Phillips/Havells/Wipro/Lighting]
36
83592
2322
... More
Supply, installation, testing and commissioning of Circular COB Led Focus Light suitable for Recess Mounted with tiltable & retractablepossibilities for uniform wall washing or directional light. System wattage 7W & minimum system lumen of 700 LM & the luminaire shall be with system efficacy 100 Im / W. Enclosure /Housing made of Pressure Die Cast Aluminium with anodised alumnium deep recessed reflector for precise light distribution. Fixtures swivel from 12degree to 60 degree & has 350degree rotation with ceiling surface. Beam angle 24/36/60 Degree with UGR19, Corrosion resistance white powder coated. IP20, The operating CCT shall be ≥5700K/4000K/3000K with CRI of 80. input voltage range of 150 to 270V, THD ≤ 10% & PF 0.95, 50,000 Hrs LED Life with L70 Criteria. The LED shall be SMD type. Luminaire shall have minimum inbuilt surge protection of 2.5KV & External upto 4KV. The luminaire shall be with following certifications: NABL certified inhouse LAB LM79 & LM80 issued by LED manufacture. [Make- LT Model No. -RWR0N00730NDWEP024-Revolve Min WALL WASHER 7W 3000K CCT NON DIM WHITE (PC) PRIME 24 Beam Angle or equivalent in Phillips/Havells/Wipro/Lighting]
19
50958
2682
... More
Supply, installation, testing and commissioning of Surface Mounting type uniform glow, warm colour (6000-6500K), IP 20 LED strip (mercury free) having long lasting adhesive,SMD LED Bulb, Lamp life (hours) 35000 hours, less than 0.5 s Start up time,Operating temperature -10 °C to + 40 °C, minimum rated lumens of 1700, Cut out dimensions 5000 mm, Recessed distance 5 mm made of Flexible PCB material with Body colour laminate suitabe for withstanding Voltage range 140 V - 270 V at 50 Hz AC supply including connections etc as required
[Make- Havells FLEXI LED STRIP 24 W (Warm White) or equivalent in Phillips/Wipro/Bajaj/Crompton having 2 years warranty]
2
1956
978
... More
Supply, installation, testing and commissioning of surface mounted LED downlighter luminaire in metallic housing, with a minimum system lumen output of 1500 lumen and with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required.
2
4866
2433
... More
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1200 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
10
8610
861
... More
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
4
2500
625
... More
Supplying and installation of metallic Exhaust fan with 225 mm sweep in the existing opening, including making the hole to suit the size of the above fan and making good the damage, connection, testing , commissioning etc as required.
(Bajaj Freshee 225 mm metallic exhaust fan or with similar specifications in Crompton / Orient / Usha / Almonard/Havells having 2 years warranty)
2
4606
2303
... More
Supplying and installation of metallic Exhaust fan with 150 mm sweep in the existing opening, including making the hole to suit the size of the above fan and making good the damage, connection, testing , commissioning etc as required.
(Bajaj Freshee 150 mm metallic exhaust fan or with similar specifications in Crompton / Orient / Usha /Almonard/Havells having 2 years warranty)
1
2471
2471
... More
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 380 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
3
1875
625
... More
Supplying, installation, testing and commissioning of Passive Infrared (PIR) technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp, for mounting height up to 2.8 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required.
6
27612
4602
... More
Supply and installation of 400 mm sweep, 220 V, wall mounted fan along with speed regulator unit for speed control, on the existing wall, including connection, testing, commissioning etc. as required. (Make: Crompton/Havells/Orient/Usha/Bajaj/Almonard)
26
87672
3372
... More
Providing and fixing 12 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
3
1194
398
... More
Supply, installation, testing and commissioning of DIN-Rail Mount type, 2400mA Power Supply Module for Over Voltage and Short Circuit protection having DC/COM/DATA Connection ports suitable to operate on 110V/220V, 50-60Hz AC supply delivering Output current of 2400mA at 24V DC etc as required. (Make: Crabtree/Helvar/Lutron/Schnieder)
1
24645
24645
... More
Supply, installation, testing and commissioning of smart Multi-function touch panel in ABS,PC hosuing alogwith suitable Panel power interface for operation on 12-30V DC supply with following features : Key Mode: Single on/off, Single on, Single off, Combi-nation on, Combination off, Combination on/off, Double click single on/off, Double click combination on/off.
Key Control Type: Scene, Sequence, Timer, Universal Switch, Single Channel Control, Broadcast Scene, Broadcast Channel, Curtain Control, GPRS Control, Panel Control, Security Module etc.
Button Lock, mutually exclusive function.
Customized Button labels and replaceable plate.
Supports online upgrading. (Make: Crabtree/Helvar/Lutron/Schnieder)
2
112222
56111
... More
Supply, installation, testing and commissioning of DIN-Rail Mount type, 64 Channel DALI controller in PC housing suitable for operation on 15-30 V DC supply.The controller shall be able to support 64 DALI lightning equipments, in 16 separate areas with dimming and scene control.The controller shall have built in DALI power supply and short-circuit protection for DALI wires. (Make: Crabtree/Helvar/Lutron/Schnieder)
1
23689
23689
... More
Supply, installation, testing and commissioning of DIN-Rail Mount type, 1-port IP interface panel in PC Housing suitable for 15-30 V DC working voltage, RJ45 Signal interface, RJ-45 to UDP/IP network interface.The IP interface should be able to support local control, p2p control, remote control (local control by default), local network and shall allow atleast 4 devices to connect this module for remote control. (Make: Crabtree/Helvar/Lutron/Schnieder)
1
17587
17587
... More
Supply, installation, testing and commissioning of DIN-Rail Mount type, Logic Module in PC Housing suitable for 15-30 V DC working voltage having provision of 240 logic blocks and logic inputs like channel status,year, date, week, time, external input value, sequence status, channel status, panel status, security etc. The controller shall have built-in real-time clock and online upgradation of the module shall be available. (Make: rabtree/Helvar/Lutron/Schnieder)
1
21654
21654
... More
Supply, installation, testing & commissioning of 10 KVA True online UPS (with 60 min back up) having 3 phase 4 wire input & 3 phase 4 wire output including sealed maintenance free batteries & duly painted heavy duty angle iron rack.The system shall be suitable for operation on input voltage range of 340-460 V & output voltages of 415/400/380V (adjustable) with + 1% of regulation, overload capacity of 10% for 1 min and suitable to operate in temperature range of 0-40 C including connection etc.as reqd. The entire UPS system (including batteries) should have a warranty of minimum 2 years. [Make- Nexus Power Sytems/Emerson/Numeric]
1
268062
268062
... More
Supplying and installing following sizes of Hot Dipped
Galvanised Iron floor trunking (galvanisation thickness not less than 50 microns) with GI top cover, GI fixing brackets and joined with couplers/connectors on the existing floor trench etc. as required.
-
-
-
... More
100 mm width X 38 mm depth X 1.6 mm thickness
9.76
16474
1688
... More
225 mm width X 38 mm depth X 1.6 mm thickness
9.76
31680
3246
... More
300 mm width X 38 mm depth X 1.6 mm thickness
60
565440
9424
... More
Supplying and fixing of following sizes of height adjustable GI Junction boxes ( 1.6 mm thick GI sheet ) with base & cover plate in existing metal raceway sytem and anchoring it to the flooring etc as required.
-
-
-
... More
150 x 150 x 65 - 90 mm
1
3037
3037
... More
225 x 225 x 65 - 90 mm
1
3647
3647
... More
300 x 300 x 65 - 90 mm
24
109584
4566
... More
Supplying and fixing of following sizes of height adjustable GI Junction boxes ( 1.6 mm thick GI sheet ) having fly over with base & cover plate in existing metal raceway sytem anchoring it to the flooring etc as required.
-
-
-
... More
225 x 225 x 65 - 90 mm
1
3421
3421
... More
300 x 300 x 65 - 90 mm
5
25630
5126
... More
Supplying and fixing of following sizes of verticlal GI riserss ( 1.6 mm thick GI sheet ) in existing metal raceway sytem and anchoring it to the flooring/wall etc as required.
-
-
-
... More
300 x 300 x 65 - 90 mm
8
23696
2962
... More
Supplying, installation, testing and commissioning of following tonnage , Inverter type, 5 Star BEE rating, all weather hot and cold Air conditioner complete with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit including copper pipe wrapped with insulation, Drain pipe and connecting cable, remote control, 3 pin 25 A plug top, user manual with warranty certificate as per OEM specifications) includig following : i) Refregirant pipe & Inter-connecting cabe length upto 3 mtrs.
ii)Warranty : 1 Year on complete Unit and minimum 5 Years on Compressor and PCB.
iii) Rated ISEER : minimum 5.0. (Make- Daikin / Toshiba/ Blue star / O' General / Mitsubishi )
-
-
-
... More
1.5 TR (high wall mounted type indoor unit with cordless remote control and outdoor unit mounted on suitable metal stand)
7
575897
82271
... More
Supplying, installation, testing and commissioning of following tonnage , Inverter type, 5 Star BEE rating, all weather hot and cold Air conditioner complete with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit including copper pipe wrapped with insulation, Drain pipe and connecting cable, remote control, 3 pin 25 A plug top, user manual with warranty certificate as per OEM specifications) includig following : i) Refregirant pipe & Inter-connecting cabe length upto 3 mtrs.
ii)Warranty : 1 Year on complete Unit and minimum 5 Years on Compressor and PCB.
iii) Rated ISEER : minimum 5.0. (Make- Daikin / Toshiba/ Blue star / O' General / Mitsubishi )
-
-
-
... More
2.0 TR (high wall mounted type indoor unit with cordless remote control and outdoor unit mounted on suitable metal stand)
5
482730
96546
... More
Supplying and wrapping white/beige waterproof tape around existing refrigerant ac pipes, etc. complete as required. [Measurement of tape will be done linearly along the lenth of pipes]
120
7200
60
... More
Providing extra copper tubing / piping for refrigerant, insulation and 3 core x 2.5 Sq. copper condutor cable for 1.5/2TR Split AC as per manufacturers specification , clamps, etc. complete as reqd. ( two copper pipes one suction and one discharge line with wire and foam insulation tubing will be measured as one unit) .
60
41700
695
... More
Supply, Installation, testing and commissioning of wall mounted type voltage stabilizer suitable for 1.5 Ton Split Air conditioner with High / Low voltage cut off, thermal overload relay and Time Delay Relay, WORKING VOLTAGE RANGE : 150-285 Volts including connection etc. as required. (V-Guard make-Model VND 400 plus or similar of Totaline / Logicstat / Microtek/Luminous / Bluebird with minimum 3 year warranty.)
7
28140
4020
... More
Supply, Installation, testing and commissioning of wall mounted type voltage stabilizer suitable for 2.0 Ton Split Air conditioner with High / Low voltage cut off, thermal overload relay and Time Delay Relay, WORKING VOLTAGE RANGE : 150-285 Volts including connection etc. as required. (V-Guard make-Model VND 500 or similar of Totaline / Logicstat / Microtek/Luminous / Bluebird with minimum 3 year warranty.)
5
23445
4689
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
... More
25 mm nominal dia Pipes
60
24093
401.55
... More
Supply, installation, balancing and commissioning of site fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.
-
-
-
... More
Thickness 0.63 mm sheet
35
37030
1058
... More
Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications.
10
70460
7046
... More
Supplying & fixing of powder coated extruded aluminium Supply Air Grills with louvers but without volume control dampers complete as required.
10
59100
5910
... More
Supplying and Fixing closed cell nitrile rubber tubular insulation with low thermal conductivity, high moisture diffusion resistance, class O fire performance, detrimental to fungal/bacterial growth suitable for temperature range of -20 degress to 90 degress alonwith aluminium foil on one side on GI Ducting as per cross-section and design of ducting etc complete as required
45
11925
265
... More
Supply Installation, Testing and commissioning of factory built ceiling suspended / floor mounted double skin type Treated Fresh Air Unit with sectionalized, made of extruded Al section frame structure with thermal break profile of 25±2mm thick panels consisting of GI casing of thickness 0.6mm outside layer and 0.6mm plain GI sheet inside layer with polyurethane foam (PUF) insulation of density 40±2Kg/cum factory injected between them by injection moulding machine complete with forward/backward curved blower section, 6-row deep chilled water cooling coil section with aluminium finned copper tubes. [ Makes- Zeco/Edgetech/Citizen]
-
-
-
... More
(i) 800 CFM / 6-Row Deep
1
124170
124170
... More
Supply, Installation, testing & Commissioning of Air Cooled Type R410a DX Condensing type Outdoor Unit complete with outdoor unit along with first charge of R410A refrigerant, suitable for operation on 400±5% volts, heat exchanger with al. fin and copper tube, Centrifugal fan for condenser, electrical and microprocessor base panel and all accessories for proper functioning the unit. DX Condensing unit will be connected with Air Handling Unit (AHU) [ Make- Carrier/Bluestar/Daikin]
-
-
-
... More
5.5 TR
1
113408
113408
... More
Supply, Installation, testing & Commissioning of following items for TFA :
-
-
-
... More
Expansion Valve for TFA unit
1
12237
12237
... More
Drier for TFA unit
1
4031
4031
... More
Supply, Installation, testing & Commissioning of Remote Controller for TFA [ Make- Carrier/Bluestar/Daikin]
1
8638
8638
... More
P&F Interconnecting Refrigerant Pipe Work with (19mm/13mm thick) closed cell elastomeric nitrile rubber tubular insulation between TFA & outdoor units as per specifications, all piping shall be properly supported with GI hanger & supports as required
10
32390
3239
... More
Supplying, installation, testing & commissioning of manual call box of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
3
1422
474
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
2
1114
557
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
-
-
-
... More
4 Zone
1
8866
8866
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
100
17300
173
... More
Supply, installation, testing, and commissioning of access control systems incorporating facial and fingerprint recognition, capable of accommodating 5000 or more users. This includes a comprehensive setup designed for installation on access control gates, complete with magnetic locks, controllers, and application software tailored to meet site-specific requirements. Complete in all respects with all the required software, etc., as required, as per the instructions of the engineer in charge. Certifications: CE, FCC, KC, ROHS, WEEE, REACH, BIS (Make : Bosch/Honeywell/HID/ Suprema)
1
75581
75581
... More
Providing and fixing 4kg Dry powder ( Stored pressure) type portable fire extinguiser of following capacity with mono ammonium phosphate powder 90 % applicable to fire class A,B,C controllable discharge mechanism with EPDM Hose and nozzle , UGTS Pressure gauge , deep drawm with MIG welding technology , external pure plyster & internal epoxy polyster powder coated , brass forged valves with safety pin of SS Material and welding procedure approved by TPI rating as per 15683 and ISI Mark with suitable fixing bracket ( MS ) etc as reqd .Make -Ceasefire/Minimax /Kanex
6
14484
2414
... More
Providing and fixing 4.5kg CO2 type (High pressure ) type portable trolley mounted fire extinguiser of following capacity with CO2 Gas fro fire class B & C electrical discharge control mechanism fitted with high pressure steel braided discharge nozzle for dispersed discharge of CO2 enamel spray painting powder coated handle , hot spinning seamless ISI Marked rating as per IS 15683 with suitable fixing bracket (MS) etc complete as reqd Make - Ceasefire/Minimax /Kanex
5
31040
6208
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. [Design & Draft to got approved as per Engineer-in-charge]
147
8379
57
... More
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on surface or recess, complete with the following accessories fixed in, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 100 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
1
3735
3735
... More
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
50
3450
69
... More
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
4
640
160
... More
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
2
424
212
... More
Dismantling of SPN Industrial type socket outlet alongwith MCB, in sheet steel enclosure including credit for same etc. as required.
6
378
63
... More
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
-
-
-
... More
Up to 25 mm conduit.
250
857
3.43
... More
Above 25 mm conduit.
50
343
6.86
... More
Dismantling of the existing ceiling fan / Exhaust fan of all size installed in the building and depositing it in concerned store
23
1357
59
... More
Dismantling and removing of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC.
-
-
-
... More
Upto 35 sq. mm
100
400
4
... More
Dismantling and removing of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC.
-
-
-
... More
Above 35 sq. mm and upto 95 sq. mm
60
420
7
... More
Dismantling and removing of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC.
-
-
-
... More
Above 95 sq. mm and upto 185 sq. mm
20
160
8
... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. ( Dismantling of feeder pillar / panel foundation)
15
36513
2434.25
... More
Excavation of the cable trenches in hard rock not exceeding 1.5 metres in width, and lift upto 1.5 metres, including getting out the excavated soil and disposal of excavated soil as directed within a lead of 50 metres.
10
12150
1215
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
9
70906
7878.5
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
8
68667
8583.4
... More
CEMENT PLASTER (IN FINE SAND)
-
-
-
... More
15 mm cement plaster on the rough side of single or half brick wall of
mix :
-
-
-
... More
1:4 (1 cement: 4 fine sand)
10
3994
399.45
... More
less credit for the unserviciable items dismantled items during execution of the work.
-
-
-
... More
Assorted PIANO Type Switches
60
-30
-0.5
... More
Assorted PIANO Type Sockets
25
-37
-1.5
... More
Assorted Bell push/PIANO Type
2
-1
-0.5
... More
Assorted Call bell buzzer single phase
2
-2
-1
... More
Assorted Brass batten/ angle holder/Brass Bracket
10
-20
-2
... More
Assorted Fan regulator/resistance type
15
-7
-0.5
... More
Assorted Telephone Socket outlet
10
-5
-0.5
... More
Assorted T.V. Socket outlet
5
-2
-0.5
... More
Assorted Capacitor, 3.15/2.50/2.25 mfd
35
-17
-0.5
... More
Assorted 1200/1400 mm sweep ceiling Fan with blades
15
-5250
-350
... More
Assorted Fresh Air FAN 200/250
3
-450
-150
... More
Assorted Exhaust fan 300/380/450
3
-750
-250
... More
Assorted Wall Bracket Fittings
10
-50
-5
... More
Assorted fluorescent Light Fittings
40
-200
-5
... More
Assorted Bulk Head Fittings
5
-75
-15
... More
less credit for the dismantled Copper wire wires from light points/ circuit/ submain/power circuit wiring,.
35
-5250
-150
... More
less credit for the dismantled aluminium wire wires from light points/ circuit/ submain/power circuit wiring,.
5
-175
-35
... More
Assorted metal switch box.
30
-60
-2
... More
Assorted MCB DB SPN with out MCBs
3
-45
-15
... More
Assorted MCB DB TPN with out MCBs
2
-40
-20
... More
Assorted MCB SP
60
-300
-5
... More
Assorted MCB DP
15
-105
-7
... More
Assorted MCB TP AND TP&N
5
-50
-10
... More
Assorted Industrial type sockets
5
-50
-10
... More
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 16,79,379/-
1
16793
16793.79
... More
Add Difference in GST of(18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 16,79,379/- (DSR) +16,793.79 (L/Cess) = 16,96,172.79
1
107367
107367.74
... More
Less COST INDEX on DSR( E ) @ -2.73 % i.e Rs. 16,79,379/- (DSR) +16,793.79 (L/Cess) + Rs. 1,07,367.74 (GST difference) = Rs. 18,03,540.53
1
-49236
-49236.66
... More
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 16,79,379/- (DSR) +16,793.79 (L/Cess) + Rs. 1,07,367.74 (GST difference) + 3,70,764.95 (DSR Civil) - 49,236.66 (Cost Index) = Rs. 21,25,068.82
1
-57376
-57376.86
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements