National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 5,89,979Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_824142_1Bid Award Id
ViewTender No
22/CS/2024-25/NSG/2nd CallTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
150
35212
234.75
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) :
-
-
-
Along external wall where the apron is not provided using chemical emulsion @75litres/ sqm of the vertical surface of the substructure to a depth of 300 mm including excavation channel along the wall & rodding etc. complete:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
150
5835
38.9
Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:
-
-
-
With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
125
6681
53.45
Treatment of soil under existing floors using chemical emulsion © one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement: 2 Coarse sand) to match the existing floor:
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
125
38756
310.05
Treatment of existing masonry using chemical emulsion @ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to the full depth of the hole :
-
-
-
With Chlorpyriphos/Lindane E.C. 20% with 1% concentration
120
5160
43
Treatment at points of contact of wood work by chemical emulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same.
100
27970
279.7
Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth
-
-
-
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
17.41
113488
6518.6
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement: 2 coarse sand (zone-Ill) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources)
12.5
5135
410.85
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
241.2
180731
749.3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
113.4
44469
392.15
Shelves (Cast in situ)
95.35
88413
927.25
Lintels, beams, plinth beams, girders, bressumers and cantilevers
90.49
66636
736.4
Columns, Pillars, Piers, Abutments, Posts and Struts
10
9613
961.3
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
3255
351051
107.85
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
4701
507002
107.85
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge, for the following grades of concrete.: Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
-
-
-
All works upto plinth level
-
-
-
Concrete of M25 grade with minimum cement content of 330 kg /cum
21.7
206253
9504.75
All works above plinth level upto floor V level
-
-
-
Concrete of M25 grade with minimum cement content of 330 kg /cum
31.34
309024
9860.4
Add for using extra cement in the items of design mix over and above the specified cement content therein.
16
11736
733.5
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6(1 cement :6 coarse sand)
12.37
88225
7132.25
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6(1 cement : 6 coarse sand)
40.78
371340
9105.95
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth in :
-
-
-
cement mortar 1:4(1 cement :4 coarse sand)
7.16
6480
905.05
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:4(1 cement :4 coarse sand)
5
5619
1123.8
Brick edging 7cm wide 11.4 cm deep to plinth protection with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 including grouting with cement mortar 1:4 (1 cement : 4 fine sand).
259.6
15796
60.85
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqnn
118.41
641012
5413.5
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
80
101436
1267.95
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete:
-
-
-
25 mm dia
150
78832
525.55
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
300x16 mm
10
3032
303.25
250x16 mm
5
1303
260.6
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10 mm
20
2303
115.15
200x10 mm
10
997
99.7
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
125 mm
20
1325
66.25
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.
-
-
-
Twin rubber stopper
10
723
72.35
Providing and fixing to existing door frames.
-
-
-
Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings . The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment).
49.5
257768
5207.45
Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and lnline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for (i) Sites with basic wind speed 45 m/sec as per IS 875 — Part 3 (ii) Sites with structure height more than 20m for all wind speeds
-
-
-
Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body.
-
-
-
Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m).
185.04
2012161
10874.2
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
500
66850
133.7
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
300
58320
194.4
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
25 mm thick
400.21
779709
1948.25
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
45
105961
2354.7
Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge.
-
-
-
Size of Tile 1000x1000 mm
570
99465
174.5
Providing and laying full body vitrified tile in floor of minimum thickness 15 mm with water absorption less than 0.06% and conforming to IS:15622, of approved make, brand and manufacturer, laid on 20 mm thick base cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.30 kg / sqm including grouting the joints with white cement and matching pigments etc. The slab must be cut with the zero chipping diamond cutter only. Laying of slab will be done with the help of notch trowel, wedge, clips of required thickness, vacuum cups for lifting, leveling system and rubber mallet for placing the slab gently and easily. Size of tile 800x2400 mm of all colours and shades.
648.45
2349950
3623.95
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
5
680
136.15
Single pushfit Coupler
-
-
-
110 mm
5
638
127.6
Single tee with door
-
-
-
110x110x110 mm
5
1170
234.15
Single tee without door
-
-
-
110x110x110 mm
5
1106
221.35
Bend 87.5°
-
-
-
110 mm bend
5
751
150.35
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
5
1856
371.3
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6(1 cement: 6 coarse sand)
1651.2
652801
395.35
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour:
-
-
-
New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre
2000
371300
185.65
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
5000
803000
160.6
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
150
23385
155.9
Providing and applying 12 mm thick (average) premixed formulated one coat gypsum lightweight plaster having additives and light weight aggregates as vermiculite/ perlite respectively conforming to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven background such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete.
500
234450
468.9
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
2500
390125
156.05
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
1500
29625
19.75
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:
-
-
-
One or more coats on old work
150
15420
102.8
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface
200
24150
120.75
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
With cement mortar 1:4 (1cement: 4 coarse sand)
100
56050
560.5
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.
20
8675
433.75
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge.
-
-
-
Orissa pattern W.C Pan of size 580x440 mm
2
8957
4478.75
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
570
1966
3.45
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall
50
162
3.25
Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.
10
4291
429.1
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
5
12171
2434.25
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
2
7102
3551.25
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
2
4120
2060.2
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
100
14350
143.5
Dismantling steel work in single sections including dismembering and stacking within 50 metres lead in:
-
-
-
Channels, angles, tees and flats
500
1150
2.3
Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.
800
4520
5.65
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
50
13322
266.45
Demolishing mud phaska in terracing and disposal of material within 50 metres lead.
306.4
280141
914.3
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1500
81975
54.65
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) by groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineer- in-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately). Note:- Cement content considered in M-30 is @ 340 kg/cum. Excess/ less cement used as per design mix is payable/ recoverable separately.
-
-
-
Cement concrete manufactured in automatic batching plant (RMC plant) including transportation to site in transit mixer
43.56
483448
11098.45
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
2
13031
6515.55
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :
-
-
-
Single half stall urinal with 5 litre P.V.C. automatic flushing cistern
1
12071
12071.75
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
10 litre capacity - White
2
2381
1190.65
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
40 mm dia
5
583
116.7
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
2
2723
1361.8
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
2
463
231.95
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour.
-
-
-
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms.
2
1417
708.95
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
15 mm nominal dia Pipes
10
2868
286.8
20 mm nominal dia Pipes
10
3350
335
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work
-
-
-
20 mm nominal dia Pipes
20
5486
274.3
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
-
-
-
15 mm dia nominal bore
30
10992
366.4
20 mm dia nominal bore
70
30611
437.3
25 mm dia nominal bore
100
55170
551.7
50 mm dia nominal bore
50
52417
1048.35
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work
-
-
-
40 mm dia nominal bore
50
30852
617.05
50 mm dia nominal bore
50
38107
762.15
65 mm dia nominal bore
50
44830
896.6
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
15 mm nominal bore
10
977
97.75
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
150 mm diameter
2
444
222.35
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
25 mm nominal bore
5
2196
439.25
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
12000
132000
11
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
10
5068
506.8
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
5
3352
670.45
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
5
2871
574.3
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
125 mm nominal dia with 25 mm waste hole
5
259
51.85
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
12770
12770.55
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
L D- 2.5
-
-
-
Rectangular shape 600x450 mm internal dimensions
1
1437
1437.65
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
200
106180
530.9
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
200
126890
634.45
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
Pre-laminated particle board with decorative lamination on both sides
10
11154
1115.4
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
10
15052
1505.25
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
Upto 5 mm depth and 5 mm width
50
4837
96.75
Providing and fixing anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868. Minimum anodic coating of grade AC 15) sub frame work for windows and ventilators with extruded built up standard tubular sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia and size (Dash fastener to be paid for separately).
250
100700
402.8
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. “All above operations to be done in order and as directed and specified by the Engineer-in-Charge”:
-
-
-
With average thickness of 120 mm and minimum thickness at khurra as 65 mm.
1922.18
3238104
1684.6
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
294.93
546225
1852.05
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/ Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5 mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
Frame size 65 x 100 mm
50
55565
1111.3
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)
-
-
-
30 mm thick
11.55
55026
4764.2
35 mm thick
20.79
112948
5432.85
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/ kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges and necessary S.S screws shall be paid separately)
-
-
-
25 mm thick
25.2
98006
3889.15
Credit for MS section like angle, tee, flats, grill etc.
250
-9750
-39
Credit for SCI/CI pipe
200
-7000
-35
Credit for G.I. pipe
50
-1750
-35
Credit for CP fittngs etc
50
-24200
-484
Providing and Fixing Glass shelf 600 mm long of JAQUAR make cat No. ACN-CHR-1171N or Euronics make cat. No. ACC06 or equivalent as per direction of Engineer-in-charge.
2
4706
2353
Providing and laying rectified matt finish Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make in all colours, shades and pattern matching with bathroom wall tile concepts, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
20
28520
1426
Providing and Fixing on wall face unplasticidsed Rigid PVC rain water pipes confirming to IS: 13592 Type-B,including jointing with seal ring confirming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes with 6 kg/cmxcm Pressure. 110 mm diameter
35
16835
481
15mm cement plaster on external wall surface of single or half brick wall of polymer modified ready mixed plaster of fine grade Portland, graded sand polymers with water soluble additives as per manufacturer specification of approved make and as per directions of Engineer- in charge.
616
343728
558
Providing and fixing 6mm thick High Pressure (interior grade) compact Laminate made out of thermosetting resign treated Kraft as core material and design paper as a finish surface.Compact laminates should have the characteristic of flame retardant fulfilled the crite- ria of under BS-476/97 and EN438-6 with classification of BS1D0 standard property,Anti bacterial and anti-termite property under JIS Z2801:2000,Chemical resistance, Scratch resistant fire re- sistance,weather & climatic shock resistance(The manufacturer should provide10 years warranty certification on any manufactur- ing and moisture related defects)The compact laminates should be resistance to water immersion through permissible increase on thickness and mass 0.60parcent and board should have densi- ty1.35kg/cm3 and fulfilled the criteria of FSCand Green Guard Gold certification and manufactured under EN438-2&3:2005 standard Finish and colour of compact laminates should be final- ised under direction of Engineer –incharge.including fixing Com- pact laminates on existing 25x50 mmx2mm thick aluminium tube or approved tube size at 600mm c/c under desirable height and fixed through same compact colour rievts or compact adhesive as per recommended by compact supplied agency Finish and colour of Interior cladding should be approved under engineer-in-charge direction.
81.9
347829
4247
Deduct GST Factor on DSR-2023 Items @ total of DSR rates - 0.973 of DSR rates) i.e 1,75,67,289.40 x 0.973 = Rs. 1,70,92,972.59 (C)
1
-474316
-474316.81
Electrical
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
4
4060
1015
Group B
4
4728
1182
Group C
109
159903
1467
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
10
15620
1562
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
875
292250
334
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
458
245946
537
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
310
72230
233
2 X 4 sq. mm + 1 X 4 sq. mm earth wire
435
145290
334
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
160
70240
439
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
180
102600
570
2 X 16 sq. mm + 1 X 6 sq. mm earth wire
120
92640
772
4 X 4 sq. mm + 2 X 4 sq. mm earth wire
220
118140
537
4 X 6 sq. mm + 2 X 6 sq. mm earth wire
80
60320
754
4 X 10 sq. mm + 2 X 6 sq. mm earth wire
95
95475
1005
4 X 16 sq. mm + 2 X 6 sq. mm earth wire
180
245700
1365
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required.
-
-
-
Group A
20
11480
574
Group B
20
12740
637
Group C
267
238698
894
Rewiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
5
4470
894
Supplying and drawing following size of FRLS PVC insulated copper conductor single core cable in the existing surface/ recessed steel/ PVC conduit as required
-
-
-
1 x 1.5 sq. mm
30
1350
45
2 x 1.5 sq. mm
20
1400
70
3 x 1.5 sq. mm
380
36100
95
4 x 1.5 sq. mm
10
1200
120
5 x 1.5 sq. mm
5
775
155
6 x 1.5 sq. mm
110
19910
181
9 x 1.5 sq. mm
80
22800
285
1 x 4 sq. mm
144
12240
85
2 x 4 sq. mm
30
4410
147
3 x 4 sq. mm
210
43260
206
4 x 4 sq. mm
40
11000
275
6 x 4 sq. mm
32
12672
396
3 x 6 sq. mm
10
3040
304
6 x 6 sq. mm
10
5980
598
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required
-
-
-
1 Pair
20
620
31
2 Pair
30
1140
38
4 Pair
10
540
54
Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required.
210
9870
47
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
1500
192000
128
25 mm
800
116000
145
32 mm
155
28520
184
40 mm
50
11400
228
50 mm
30
8520
284
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 A switch
267
27501
103
2 way 5/6 A switch
10
1480
148
15/16 A switch
72
11232
156
3 pin 5/6 A socket outlet
20
2440
122
6 pin 15/16 A socket outlet
72
14184
197
Telephone socket outlet
48
7104
148
TV antenna socket outlet
36
5328
148
Bell push
10
1400
140
25 amp switch
2
578
289
16A, 240 V, , "C" curve, SP modular MCB
60
17580
293
Computer Jack ( RJ 45) Cat6 (1 module)
52
15184
292
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
93
34317
369
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
1200
40
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
-
-
-
1 or 2 Module (75mmX75mm)
16
4768
298
3 Module (100mmX75mm)
5
1635
327
4 Module (125mmX75mm
3
1029
343
6 Module (200mmX75mm)
25
10050
402
8 Module (125mmX125mm)
5
2270
454
12 Module (200mmX150mm)
28
15316
547
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
15
1995
133
3 Module
10
1510
151
4 Module
5
790
158
6 Module
10
1820
182
8 Module
5
1055
211
12 Module
10
2720
272
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.
53
25281
477
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
145
84970
586
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
89
7743
87
Supplying and fixing brass batten/ angle holder including connection etc. as required.
5
655
131
Installation, testing, commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/ CFL / LED lamps per fitting/ /Downlighters/ LED Panel Light /LED batten on wall or ceiling, complete with all accessories including connection and earthing etc. as required.
5
595
119
Supplying and fixing Ding Dong Door Bell, suitable for single phase, 230 V, complete as required.
5
495
99
Providing and fixing plain 16/0.20mm (0.50sqmm) twin circular flexible FRLS PVC insulated, PVC sheathed copper conductor cable direct on the wall with PVC clips etc. as required.
30
1200
40
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq, mm FRLS PVC insulated, copper conductor, single core cable etc. as required.
5
1065
213
Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
230
46
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
260
52
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
2
900
450
510 mm sweep
2
1286
643
Extra for fixing the louvers/ shutters complete with frame for an exhaust fan of all sizes.
2
414
207
Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.
-
-
-
1 run of cable
1200
68400
57
2 run of cable
320
30720
96
3 run of cable
200
26800
134
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group C
5
4290
858
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required.
177
120360
680
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 6 pin 15/16 A modular socket outlet and 2 nos. 15/16 A modular switch, connections etc. as required.
114
111150
975
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 16 A modular socket outlet and 16 A modular SP MCB, "C" curve including connections, painting etc. as required.
73
56210
770
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
5
550
110
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 way , Double door
1
2206
2206
8 way , Double door
1
2573
2573
12 way , Double door
1
2315
2315
16 way, Double door
12
37692
3141
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
1
4091
4091
6 way (4 + 18), Double door
1
4974
4974
8 way (4 + 24), Double door
5
29835
5967
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
330
84480
256
Single pole and neutral
10
5990
599
Double pole
15
9840
656
Triple pole
2
2014
1007
Triple pole and neutral
7
8596
1228
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
15
195
13
Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A
2
5284
2642
63 A
15
40830
2722
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63 A
7
20104
2872
Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V "C" curve DP MCB complete with connections, testing and commissioning etc. as required.
2
2338
1169
Supplying and fixing TP sheet steel enclosure on surface/ recess along with 16/25/32 A 415 V "C" curve TP MCB complete with connections, testing and commissioning etc. as required.
2
3184
1592
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 6 way, Double door SPN MCBDB
1
752
752
For 8 way, Double door SPN MCBDB
1
832
832
For 10 way/ 12 way, Double door SPN MCBDB
1
810
810
For 14 way/16 way, Double door SPN MCBDB
12
10824
902
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc.as required.
-
-
-
For 4 way, Double door TPN MCBDB
1
1080
1080
For 6 way, Double door TPN MCBDB
1
1124
1124
For 8 way, Double door TPN MCBDB
5
6700
1340
Supplying and fixing Cable End Box (Loose Wire Box) suitable for triple pole and neutral, sheet steel, Vertical MCB distribution board, 415 Volts, on surface/ recess, complete with testing and commissioning etc. as required.
1
1170
1170
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required
-
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
160
154080
963
450 mm width X 50 mm depth X 2.0 mm thickness
30
39750
1325
600 mm width X 50 mm depth X 2.0 mm thickness
10
17900
1790
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
52
96304
1852
450 mm width X 50 mm depth X 2.0 mm thickness
10
26830
2683
600 mm width X 50 mm depth X 2.0 mm thickness
5
18870
3774
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.
-
-
-
300 mm width X 50 mm depth X 1.6 mm thickness
10
21560
2156
450 mm width X 50 mm depth X 2.0 mm thickness
5
15705
3141
600 mm width X 50 mm depth X 2.0 mm thickness
2
8892
4446
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
6
41130
6855
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required.
72
20664
287
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
135
5670
42
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
8
59776
7472
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
42
29652
706
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
20
4880
244
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
8
4144
518
Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting /nut bolting/ sweating and soldering etc as required.
6
678
113
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
290
36540
126
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)
45
8865
197
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run)
10
800
80
Fixing of copper/ G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)
10
1620
162
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
8
968
121
Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required.
30
5850
195
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty)
95
320340
3372
Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe and making good the same etc. complete as per direction of Engineer-in-charge.
10
7450
745
Supplying and fixing two module Buzzer on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
654
327
Supplying and fixing two module bell/ chime on the existing modular plate switch box including connections but excluding modular plate etc. as required.
2
1018
509
Supply, installation, testing and commissioning of wall-mounted light fixture complete with B22 base, metal base in Nickel / Brass finishing with diffuser and 9 watts LED blub etc., as required directly on the wall, including connections etc. as required.
2
2504
1252
Supply, Installation, Testing and Commissioning of 900 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6, Air delivery minimum 170 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty)
2
6450
3225
Supply, Installation, Testing and Commissioning of 1400 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 7.00, Air delivery minimum 250 Cum/Min, 250 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
2
7170
3585
Supply and installation of 400 mm sweep, 220 V, wall mounted fan along with speed regulator unit for speed control, on the existing wall, including connection, testing, commissioning etc. as required.
8
24976
3122
Supplying and fixing 3 mm thick phenolic laminated sheet cover on existing switch Box / metal box with Al. Alloy/ cadmium/ zinc plated screws and washers, including cutting the laminated sheet to required shape and size etc., complete as required.
1
4170
4170
Supplying and installation of PVC Exhaust fan with louver shutter 150 mm sweep in the existing opening including making the hole to suit the size of the above fan and making good the damage, connection, testing , commissioning etc as required.
2
4190
2095
Supplying and installation of PVC Exhaust fan with louver shutter 200 mm sweep in the existing opening including making the hole to suit the size of the above fan and making good the damage, connection, testing , commissioning etc as required.
2
4564
2282
Supplying and installation of PVC Exhaust fan with louver shutter 250 mm sweep in the existing opening including making the hole to suit the size of the above fan and making good the damage, connection, testing , commissioning etc as required.
(Havells / C&G / Orient / Usha / Almonard/ Atomberg)
5
12165
2433
Supplying and installation of 300 mm sweep, 1400 RPM heavy-duty, single phase, metallic exhaust fan Conforming to IS:2312 -1967 in the existing opening,including making the hole to suit the size of the above fan and making good the damage, connection, testing, commissioning etc. as required. (Havells Turbo force Heavy Duty Exhaust Fan or with similar specifications C&G / Orient / Usha / Almonard)
10
50700
5070
Supplying and installation of 450 mm sweep, 1400 RPM heavy-duty, single phase, metallic exhaust fan Conforming to IS:2312 -1967 in the existing opening,including making the hole to suit the size of the above fan and making good the damage, connection, testing, commissioning etc. as required. (Havells Turbo force Heavy Duty Exhaust Fan or with similar specifications C&G / Orient / Usha / Almonard)
1
8264
8264
Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fan in the existing opening,including making the hole to suit the size of the above fan and making good the damage, connection, testing, commissioning etc. as required. (Havells Ventil Air or with similar specifications C&G / Orient / Usha / Almonard)
1
2285
2285
Making holes of the required size and shape in a brick masonry wall for installation of the following size exhaust fan, including making good the wall by plastering and finishing with the matching surface, etc., complete as per the direction of the engineer-in-charge.
-
-
-
150 mm sweep.
2
182
91
200 mm sweep.
2
272
136
250 mm sweep.
5
960
192
450 mm sweep.
2
1004
502
225/ 230 mm sweep
1
138
138
Cutting a hole of the required size and shape on the window or ventilator glass pane for the installation of an exhaust fan of size up to 150 mm sweep, etc., complete as per the direction of the engineer-in-charge.
1
118
118
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 380 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
2
1252
626
Supplying and fixing suitable size GI box in recess, including providing and fixing of 2/3 Module LED Foot light / skirting light, including connection etc. as required.
2
1762
881
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 4800 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
5
7110
1422
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
33
28314
858
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
2
1246
623
Supply, installation, testing, and commissioning of LED bulkhead fittings with IP 66 ingress protection, with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature of 5500K–6500 K, average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser, electronic driver, etc. as required directly on the wall, including connections, etc. as required.
6
10020
1670
Supply, installation, testing and commissioning of surface mounted LED downlighter luminaire in metallic housing, with a minimum system lumen output of 1500 lumen and with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required.
7
17031
2433
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED Surface Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling, including connections, earthing, etc. as required.
89
386171
4339
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED recessed Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour tem perature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, suitable for recessed mounting, Armstrong/grid/POP/GB ceiling complete with all accessories, diffuser and electronic driver, directly on the ceiling, including connections and earthing etc. as required.
107
378138
3534
Supply, installation, testing, and commissioning of recess mounted LED downlighter luminaire complete with aluminium powder coated pressure die cast housing and PC diffuser and electronic driver, with a minimum system lumen output of 1800 lumens and a minimum system luminous efficacy of 100 lm/W, average LED life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, and suitable for ceiling cutout of 187 mm, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing, etc. as required.
10
20950
2095
Providing and fixing a metallic louvred shutter suitable for following sizes exhaust fan, the louvres should be able to open when the fan is on and close when the fan is turned off, on the existing opening on the wall, etc., as required.
-
-
-
300 mm
1
809
809
380 mm
1
1034
1034
450 mm
1
1331
1331
Providing and fixing 3 mm thick PVC/ phenolic laminated round sheet cover with a minimum of 170 mm dia on the existing fan box with two screws, etc., as required.
89
2670
30
Providing and fixing 3 mm thick PVC / phenolic laminated round sheet cover on the existing junction box with two screws, etc., as required.
110
880
8
Supply, installation, testing, and commissioning of outdoor type 3-watt IP 65 LED foot light/ step light in Die cast aluminium housing and Polycarbonate diffuser, complete with connection, etc., as required. (Jaquar LFTL01S003XW or similar in Philips / Wipro /LT/ Havells)
2
1572
786
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
40 A Double pole
5
6065
1213
63 A Double pole
15
18195
1213
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 A Triple pole and neutral
1
2324
2324
63 A Triple pole and neutral
7
16268
2324
Fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 to 16 way, Double door
5
2540
508
Fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
10
940
94
Supplying, installation, testing and commissioning of 45 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire should have suitable for operation on voltage range 140-270V, 1Φ, 50Hz AC supply system, and a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 120 lm/W. The luminaire shall be designed for an average system life L70B50: 50000 hours and suitable for mounting on the pole bracket up to outer dia 40 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.
10
47740
4774
Supplying, installation, testing and commissioning of 2 Ton, Inverter type, 5 Star BEE rating, Hi-wall Split type Air conditioner complete suitable for operation on 230 V, 50 Hz single phase AC supply, with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit with copper pipe wrapped with insulation, Drain pipe and connecting cable, copper Condenser and Evaporator Coil, remote control, user manual with warranty certificate as per OEM specifications). i) Connecting copper pipes and cable length minimum 3 mtrs.
ii)Warranty : minimum 1 Year on complete Unit, PCB warranty 5 Years and 10 Years on Compressor.
iii) Cooling capacity (100%) as per BEE label : 7000 Watt minimum
iv) Rated ISEER : minimum 5
v) The AC should be designed to work at a maximum operating ambient temperature of up to 52 degrees Celsius (outdoor temperature).
2
167024
83512
Supplying, installation, testing and commissioning of 1.5 Ton, Inverter type, 5 Star BEE rating, Hi-wall Split type Air conditioner complete suitable for operation on 230 V, 50 Hz single phase AC supply, with all standard accessories ( Indoor Unit, Outdoor Unit, Inter-connecting kit with copper pipe wrapped with insulation, Drain pipe and connecting cable, copper Condenser and Evaporator Coil, remote control, user manual with warranty certificate as per OEM specifications). i) Connecting copper pipes and cable length 3 mtrs.
ii)Warranty : minimum 1 Year on complete Unit, PCB warranty 5 Years and 10 Years on Compressor.
iii) Cooling capacity (100%) as per BEE label : 5200 Watt minimum iv) Rated ISEER : minimum 5
v) The AC should be designed to work at a maximum operating ambient temperature of up to 52 degrees Celsius (outdoor temperature).
10
647630
64763
Providing and fixing of extra refrigerant copper piping with insulation and cable for 1.5 ton/2 ton Split AC as per manufacturers specification , clamps, etc. complete as reqd. ( two copper pipes one suction and one discharge line with connecting cable and foam insulation tubing will be measured as one unit) .
10
8930
893
Dismatling of existing of 1.5 ton /2.0 ton split air conditioner with indoor unit, out door unit and copper piping etc complete as reqd.
10
8060
806
Supplying and fixing of floor mounted / wall mounted Out Door Unit Mounting bracket suitable for 1.5/ 2 ton split Air conditioner etc complete as required.
10
9700
970
Supplying and laying of following sizes of PVC insulated, FRLS PVC sheathed round copper conductor multi core cable including connections, testing etc. as required.
-
-
-
3 x 2.5 sq. mm
20
2980
149
4 x 2.5 sq. mm
40
7800
195
Supplying and installing the following size PVC trunking cable management system, complete with front cover, internal/external/flat angles, joints, junctions, end caps, and finishing accessories, etc. as required. (Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
100 mm x 50 mm
25
38600
1544
32 mm X 12.5 mm
20
6200
310
Supplying and fixing of following sizes module frame on existing trunking including arranging the cover making good the same as original complete etc. as required.
(Make-Legrand/ Honeywell / OBO Beterman)
-
-
-
1-3 Module Frame
2
400
200
4-5 Module Frame
2
478
239
8 Module Frame
2
776
388
Providing and fixing 1/2 inches dia nylon braided flexible drain pipe for split/cassettee air conditioners etc. as required
50
3300
66
Providing and fixing CPVC pipe 20 mm dia with all accessories e.g. elbows, unions, sockets, reducers, reducing tees, nipples etc., including fixing the pipe with clamps at 1.00 m spacing on wall / floor etc. as required. (Ashirwad /Astral /Finolex/ Supreme/ Prayag )
30
5520
184
Supplying, installation testing and commissioning of BEE 5 star rating, 15 litres capacity water storage heater, with protection against over heating, Multifunction Safety Valve and external adjustable thermostat, with 16 A, 240 V, plug top and 02 nos flexible connection pipe suitable for working with 230V AC, 50 Hz, 1 Phase supply etc as required. (Make: Havells / Crompton/ AO Smith /Racold /Jaguar with 7 year warranty on inner tank, 3 year warranty on heating element, 2 year comprehensive Warranty)
1
9762
9762
Supplying and fixing PRCD (Portable Residual Current Device) Plug top, 16 A 30 mA rating including connection etc. as required.
1
777
777
Supplying and installing following size of perforated hot-dipped galvanized iron cable tray with 1.6 mm G.I. sheet cover in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders, or fixed on the wall /floor with M.S. angle iron brackets duly painted, including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
40
23680
592
300 mm width X 50 mm depth X 1.6 mm thickness
10
16870
1687
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Bends" with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders, or fixed on the wall /floor with M.S. angle iron brackets duly painted, including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
10
14410
1441
300 mm width X 50 mm depth X 1.6 mm thickness
2
3936
1968
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "Tee" with 1.6 mm G.I. sheet cover, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders, or fixed on the wall /floor with M.S. angle iron brackets duly painted, including G.I. bolts & nuts, etc. as required.
-
-
-
100 mm width X 50 mm depth X 1.6 mm thickness
2
2960
1480
300 mm width X 50 mm depth X 1.6 mm thickness
2
4570
2285
Supplying and fixing Plug top following rating including connection etc. as required.
-
-
-
16 A, three pin, Plug top ISI marked
15
1845
123
6 A, three pin, Plug top ISI marked
10
1000
100
25 A, three pin, Plug top ISI marked
2
380
190
Supplying and fixing bakelite sheets of the following size with screws in the existing looping box or panel, including cutting the sheet to the required shape and size, etc., as required.
-
-
-
6 mm thick
0.25
1079
4317
Supplying and fixing 25 A modular SP MCB, "C" curve on the existing modular plate switch box including connections but excluding modular plate etc. as required.
72
21168
294
Supplying and laying of G.I. pipe of 50 mm dia.(nominal), medium class, ISI marked in wall / floor including cutting chase, and making good the wall/ floor and finishing with matching surface after housing G.I. pipe in chase. ( for protection of UG cable)
20
16280
814
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
15
1905
127
90 mm dia (OD-90 mm & ID-76 mm nominal)
10
1710
171
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc.conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
63 mm dia (OD-63 mm & ID-51 mm nominal)
160
39520
247
90 mm dia (OD-90 mm & ID-76 mm nominal)
100
29200
292
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL pipe as required.
-
-
-
2 X 25 sq. mm
50
15350
307
3.5 x 35 sq. mm
110
58410
531
3.5 x 70 sq. mm
100
95700
957
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose for connections etc as required.
-
-
-
2 X 25 sq. mm
5
1480
296
3.5 x 35 sq. mm
20
10420
521
3.5 x 70 sq. mm
20
18860
943
Supplying, Laying and fixing of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size on wall surface as required.
-
-
-
3.5 x 35sq. mm (clamped with 1mm thick saddle)
20
10980
549
3.5 x 70 sq. mm (clamped with 25x3mm MS flat clamp)
30
31080
1036
Supplying, laying and fixing of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 KV grade of following size on cable tray as required.
-
-
-
3.5 x 35 sq. mm (clamped with 1mm thick saddle)
30
16290
543
3.5 x 70 sq. mm (clamped with 25x3mm MS flat clamp)
60
62160
1036
PANEL NO.01 Essential Panel (CCC Block Switch Room)
-
-
-
Fabrication, supply, installation, testing, and commissioning of Electrical control panel of cubical construction, floor-mounted type, fabricated out of a 2 mm thick CRCA sheet with enclosure protection class IP 42, suitable for operation on a 415-volt, 3-phase, 50 Hz, 4-wire A.C. supply system, dust- and vermin-proof, powder-coated in an approved siemens gray shade after 7 tank pre-treatment processes. The panel shall be compartmentalized type with hinged lockable doors, detachable cable gland plates made of 3 mm thick CRCA sheet, cable alleys of suitable size on both sides for cabling routing, openable type rear cover and complete with 4 strips of Aluminium bus bars of 400 Amps capacity with heat-shrinkable coloured sleeves and FRP/DMC/SMC bus bar supports at required intervals, control terminals, and suitable sized terminal blocks for incoming and outgoing cables, including providing and fixing interconnection from busbars to switch gears and up to terminal blocks with suitable sized insulated aluminium conductor /solid aluminium strip and control wiring with suitable sized insulated copper conductor cable, including suitable size M.V. danger board fixed on panel. The entire panel shall have one common copper bar of size 25 mm x 5 mm at the rear with two earth studs/terminals. The panel shall be supplied with a bottom base MS channel, not less than 100 mm x 50 mm x 5 mm thick. Suitable size of M.V. Danger Boards shall be fixed on panel. The panel base should have four 300 mm long legs (made of angle irons 50 x 50 x 6 mm or other suitable means) to raise the panel from the floor, and a removable 2 mm thick powder-coated CRCA sheet cover must be provided on four sides of the pedestal. The base frame of the panel should be grouted into the floor with four 12mm dia x 200mm long bolts and nuts. The panel shall have provision to accommodate the following switch gears as mentioned below in Item No 146 and with the required front area (approximate front area 1.800 mm X 1500 mm) and depth minimum 450 mm. (Drawings will be approved before fabrication of the panel).
2.7
118854
44020
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
250 Amps , four pole, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Microprocessor release with overload, short circuit and earth fault protection and terminal spreaders.
2
96754
48377
Extended Rotary Handle (RHOM) for 250 A MCCB
2
3766
1883
250 Amps , 4 pole, 415 V, category AC-23A. On Load Change Over Switch, in open execution.
1
16153
16153
3 ph Multifunction meter for the measurement of parameters voltage, current, power factor, frequency, KW and KWH Flush mounting.
1
3467
3467
MCB SP 2A, C-Curve 10kA
3
1323
441
CT 250/5 A amps, 10VA with class 1.0 accuracy
3
2157
719
LED Indicator Lamp, Red. 240 V AC.
1
152
152
LED Indicator Lamp,Yellow. 240 V AC.
1
152
152
LED Indicator, Lamp, Blue, 240V AC.
1
247
247
160 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection.
2
30392
15196
Direct Rotary Handle (RHOM) for 160 A MCCB
2
2534
1267
100 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection.
3
31704
10568
Direct Rotary Handle (RHOM) for 100 A MCCB
3
3801
1267
63 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection.
1
10568
10568
Direct Rotary Handle (RHOM) for 125 A MCCB
1
1267
1267
PANEL NO.02 (CCC Block Switch Room )
-
-
-
Fabrication, supply, installation, testing, and commissioning of Electrical control panel of cubical construction, floor-mounted type, fabricated out of a 2 mm thick CRCA sheet with enclosure protection class IP 42, suitable for operation on a 415-volt, 3-phase, 50 Hz, 4-wire A.C. supply system, dust- and vermin-proof, powder-coated in an approved siemens gray shade after 7 tank pre-treatment processes. The panel shall be compartmentalized type with hinged lockable doors, detachable cable gland plates made of 3 mm thick CRCA sheet, cable alleys of suitable size on both sides for cabling routing, openable type rear cover and complete with 4 strips of Aluminium bus bars of 400 Amps capacity with heat-shrinkable coloured sleeves and FRP/DMC/SMC bus bar supports at required intervals, control terminals, and suitable sized terminal blocks for incoming and outgoing cables, including providing and fixing interconnection from busbars to switch gears and up to terminal blocks with suitable sized insulated aluminium conductor /solid aluminium strip and control wiring with suitable sized insulated copper conductor cable, including suitable size M.V. danger board fixed on panel. The entire panel shall have one common copper bar of size 25 mm x 5 mm at the rear with two earth studs/terminals. The panel shall be supplied with a bottom base MS channel, not less than 100 mm x 50 mm x 5 mm thick. Suitable size of M.V. Danger Boards shall be fixed on panel. The panel base should have four 300 mm long legs (made of angle irons 50 x 50 x 6 mm or other suitable means) to raise the panel from the floor, and a removable 2 mm thick powder-coated CRCA sheet cover must be provided on four sides of the pedestal. The base frame of the panel should be grouted into the floor with four 12mm dia x 200mm long bolts and nuts. The panel shall have provision to accommodate the following switch gears as mentioned below in Item No 149 and with the required front area (approximate front area 1.800 mm X 1500 mm) and depth minimum 450 mm. (Drawings will be approved before fabrication of the panel).
2.7
118854
44020
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
250 Amps , four pole, MCCB, 36 KA breaking capacity , Ics = 100% Icu with Microprocessor release with overload, short circuit and earth fault protection and terminal spreaders.
2
96754
48377
Extended Rotary Handle (RHOM) for 250 A MCCB
2
3766
1883
250 Amps , 4 pole, 415 V, category AC-23A. On Load Change Over Switch, in open execution.
1
16153
16153
3Ph LED Ammeter Cl 1 with Inbuilt selector switch for 3 phases.
1
1156
1156
3Ph LED Voltmeter Cl 1 (0-500V) with Inbuilt selector switch for 3 phases.
1
1156
1156
MCB SP 2A, C-Curve 10kA
3
1323
441
CT 250/5 A amps, 10VA with class 1.0 accuracy
3
2157
719
LED Indicator Lamp, Red. 240 V AC.
1
152
152
LED Indicator Lamp,Yellow. 240 V AC.
1
152
152
LED Indicator, Lamp, Blue, 240V AC.
1
247
247
160 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection.
1
15196
15196
Direct Rotary Handle (RHOM) for 160 A MCCB
1
1267
1267
100 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection .
2
21136
10568
Direct Rotary Handle (RHOM) for 100 A MCCB
2
2534
1267
80 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection .
2
21136
10568
Direct Rotary Handle (RHOM) for 80 A MCCB
2
2534
1267
63 Amps , TP, MCCB, 36 KA breaking capacity with Spreader Terminals, Ics = 100% Icu with Adjustable overload and Adjustable short-circuit protection.
1
10568
10568
Direct Rotary Handle (RHOM) for 125 A MCCB
1
1267
1267
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
50
6685
133.7
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
4
2255
563.9
The road crossings of power cable through trenchless boring. Trenchless boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 150 mm dia DWC HDPE / G.I. /PVC
10
6510
651
Providing and fixing G.I. pipes complete with G.I. fittings including trenching(75 cm deep) and refilling etc.
-
-
-
50 mm dia nominal bore
10
7621
762.15
80 mm dia nominal bore
10
10417
1041.7
Dismantling of the existing switch accessories like switches, sockets, and MCBs, etc., as required.
350
1400
4
Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store.
267
2403
9
Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required.
189
4347
23
Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store.
89
5251
59
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
1075
215
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
12
1956
163
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
220
15180
69
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Above 25 mm conduits.
520
3640
7
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Up to 25 mm conduit.
110
330
3
Dismantling / de-commissioning of the existing roof top solar panels and accessories from the roof and re-installation of the same after completion of the roof treatment work in CCC block, including making connections, testing, commissioning, etc. as required, and providing consumables, nuts, bolts washers, etc. that are required during re-installation of the solar power plant.
40
354000
8850
Manual Fire Alarm System
-
-
-
Supplying, installation, testing & commissioning of heat detector operating at 54°C/57°C with rate of rise cum fixed temperature (dual thermistor) type with mounting base complete with all connection etc. as required.
20
21420
1071
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
100
115300
1153
Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
10
4080
408
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required.
10
4910
491
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front
etc. complete as required.
10
9050
905
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.
-
-
-
4 Zone
2
17732
8866
Supplying, installation, testing & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc. as required.
30
5880
196
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required.
6 zone panel for fire alarm system
100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos. (one to act as standby)
-
-
-
Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos. talk back unit -1 set.
-
-
-
Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visual indication etc., complete as required- 1 set.
-
-
-
Amplifier change over switch for inter changing amplifier- 1 No.
-
-
-
Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No.
Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set.
-
-
-
Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set.
1
48718
48718
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
1000
173000
173
Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.
-
-
-
Speaker cable Single pair, 2-core, 1.5 sqmm
50
2700
54
Speaker cable Two pair, 2-core, 1.5 sqmm
100
8900
89
Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
50
2650
53
Providing and Fixing CO2 type, 4.5 kgs, capacity Fire Extinguishers with ISI mark in seam less drawn steel cylinder, fitted with wheel valve, with discharge bend and horn, complete with initial charge, conforming to IS 15683 along with wall bracket, accessories etc., complete as required
6
49524
8254
Providing and Fixing ABC type 6 kgs capacity, stored pressure type Fire Extinguishers with ISI mark, fitted with discharge control valve and pressure gauge, filled with mono ammonium phosphate powder, complete with initial charge conforming to IS 15683 along with wall bracket, along with accessories etc., complete as required.
6
22770
3795
Supplying and fixing of Emergency Exit Light minimum 3 watt, Nominal size 300 mm x 150 mm (double side) alongwith 2 hours battery backup i/c all necessary connections/ interconnections with suspension kit/ other reqd accessories if any as required .
8
49864
6233
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
200
44600
223
CCTV and surveillance system and access control work
-
-
-
Supply, installation, Testing & Commissioning of Fixed Dome Indoor 1080p True Day/Night Switching IP camera. Complete in all respect upto entire satisfaction Engineer in charge of works. Specification:- Image device/ Sensor - 1/2.8 " Progressive Scan CCD/ Progressive Scan CMOS or Better, Resolution - 2 Megapixel (1920x1080) or better, Frame Rate upto 25/30 Fps or better, Lens type - 2.8mm / 4mm lens, IR Light & Distance - Ir Range upto 30 mrs or better, Signal to Noise Ratio -50db, Minimum Illumination - 0.3Lx Color, IR LED ON 0.0 Lux or better, Day Night - Auto Day/ Night with switchable IR cut filter, Video Compression - H.265, H.264, M-JPEG, Camera Should have multiple Streaming- Min. Triple, Edge Based Analytics, Storage- SD card slot should be expandable upto 256 GB, System Compatibility- ONVIF profile S&G, Privacy Masking- Minimum 4 Privacy zones or Higher, Protocols - IPv4/ IPv6, HTTP, HTTPS, TCP/IP, UDP, UPnP, ICMP, RTSP, RTP, SMTP, NTP, DHCP, DNS, DDNS .
Additional Features :- Noise Reduction - Digital Noise reduction on/off, WDR-
120dB WDR, Audio Input/ Output - 1 Audio Input Environment : - Indoor/ Outdoor, Operating Temperature -OC to 50C, Ingress protection & Vandal resident
Standards - IP66 or Better IK 10 or better, Certificates :- UL/BIS, FCC, EN
(Make:-Hyundai /Bosch/Pelco/Axis/ Avigilon /Honeywell)
46
1012000
22000
Supply, installation, Testing & Commissioning of Full HD 2 MP IR Bullet IR Camera. in all respect upto entire satisfaction Engineer in charge of works. Specification:- Image device/ Sensor - 1/2.8 " Progressive Scan CCD/ Progressive Scan CMOS or Better, Resolution - 2 Megapixel (1920×1080) or better, Frame Rate upto 25/30 Fps or better, Lens type - 2.8mm / 4mm lens, IR Light & Distance
- Ir Range upto 30 mtrs or better, Signal to Noise Ratio -50db, Minimum Illumination - 0.3Lx Color, IR LED ON 0.0 Lux or better, Day Night - Auto Day/ Night with switchable IR cut filter, Video Compression - H.265, H.264, M-JPEG, Camera Should have multiple Streaming- Min. Triple, Edge Based Analytics, Storage- SD card slot should be expandable upto 128 GB, System Compatibility-ONVIF profile S&G, Privacy Masking- Minimum 4 Privacy zones or Higher, Protocols - IPv4/ IPv6, HTTP, HTTPS, TCP/IP, UDP, UPP, ICMP, RTSP, RTP,SMTP, NTP, DHCP, DNS, DDNS. Additional Eeatures •
Noise Reduction -
Jigital Noise reduction on/off, WDR- 120dB WET Of 3 Input/ Output - 1
Alarm Input, 1 Alarm Output, Audio Input/ Outputo Input, 1 Audio Output. Environment :- Indoor/ Outdoor, Operating Temperature -OC to 50C, Ingress protection & Vandal resident Standards - IP66 or Better IK10 or better, Certificates :- UL/BIS, FCC, EN Make:- Hyundai /Bosch/Pelco/Axis/ Avigilon /Honeywell)
11
251900
22900
Supply, installation, Testing & Commissioning of Network Video Recorder 32
Channel for all the above ONVIF Compliant Cameras, complete with all necessary required electrical works de peripheral items as required as per specification & at site of work in line with the engineer in charge instructions. The System proposed should have minimum usable 30 days recording suitable hard disk as per requirement. Certifications UL hard disk complete in all respect upto entire satisfaction Engineer in charge of works. 16 Channels from day 1, IP Camera Input -32 cameras Simultancous live, record, playback, extraction and remote access front, mouse or remotely operated, Internal Storage - 32 Channel: with 18
TB Storage, 4 SATA Hard disk slots, Video compression format-H.265, H.264 and MJPEG, OS Supported- Window Server 2008/ Linux/Windows 10, Ethernet Card- Single LAN (10/100/1000) Network Card with asset feature tracking and security management, remote wake up. Complete in all respects with all the required software, etc., as required, as per the instructions of the engineer in charge.
Certification:- ISO 9001/9002, FCC, UL/BIS Make:-Hyundai/Bosch/Pelco/Axis/ Avigilon /Honeywell)
3
660000
220000
Supply, installation, Testing & Commissioning of Wall Mount 9U x 600W x 600 D, Front Glass Door (tinted, Toughened) with Lock & Key, 2 pairs of 19"
Mounting Rails with U-Marking. Welded Side Walls With Metal Engraved D-Link Logo, 1U Cable Manager (1), Hardware Packet (1 Pkt),6 Socket 5 Amp. Power Distribution Unit (1 No)Roof Mounted Fan Unit / 90 CFM /230V AC (1
No).Rack should be as per DIN41494 Standards.OEM must be ISO 9001,14001 certified. Make:- HCL. /Dlink/Comrack/Ritall/Western
3
29700
9900
Supply, installation, Testing & Commissioning of 8-ports 10/100/1000Base-T PoE Switch plus 2 SFP ports with Cable Diagnostics +8,000 mac entries+8 ports 802.3at compliant with total of 130W+ CoS based on 802.1p Priority Queues,DSCP,Bandwidth Control;HOL Blocking Prevention;Spanning tree +-4 IP interface +4 queues per port+Static Routing. Broadcast/Multicast/Unicast Storm Control+IPv4/\6 Dual Stack+802.3x Flow Control+Port Security supports 64 MACs per port. Make:- Cisco/Alcatel/Juniper/Dlink
1
23000
23000
Supply, installation, Testing & Commissioning of 24-ports 10/100/1000Base-T PoE Switch plus 2 SFP ports with Cable Diagnostics +24,000 mac entries + 24 ports 802.3at compliant with total of 220W+ CoS based on 802.1p Priority Queues,DSCP,Bandwidth Control;HOL Blocking Prevention;Spanning tree +-4 IP interface +4 queues per port+Static Routing. Broadcast/Multicast/Unicast Storm Control+IPv4/\6 Dual Stack+802.3x Flow Control+Port Security supports 64
MACs per port. Make:- Cisco/Alcatel/Juniper/Dlink
3
126000
42000
Supply, installation, Testing & Commissioning of 42" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, VGA Port. Make:
Sony/LG/Samsung
3
141000
47000
Supply, installation, Testing & Commissioning of 2 KVA Online UPS with isolation transformer suitable for single phase AC Input and single Phase AC output, Floor Mounted type Rating of UPS 2 KVA, Indicative Backup time 120
Minutes Complete in all respect including bettery etc. as per DGS&D
Specification. Make :- APC/ LIBERT EINOVA/Emerson/Aar Key
3
330000
110000
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
300
69900
233
Supply, installation, testing, and commissioning of access control systems incorporating facial and fingerprint recognition, capable of accommodating 5000 or more users. This includes a comprehensive setup designed for installation on access control gates, complete with magnetic locks, controllers, and application software tailored to meet site-specific requirements. Complete in all respects with all the required software, etc., as required, as per the instructions of the engineer in charge. Certifications: CE, FCC, KC, ROHS, WEEE, REACH, BIS (Make : Bosch/Honeywell/HID/VIRDI
3
225000
75000
Supply, installation, testing, and commissioning of a system featuring an Intel Core i7 processor, 16GB RAM, dual 512GB SSDs, and a 20-inch LED display, integrated with an access control application for running the Access Control Biometric Application. (Make : Dell/HP/Lenovo/Acer)
1
110000
110000
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 45,64,531/-
1
45645
45645.31
Add Difference in GST of(18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 45,64,531/- (DSR) + 45645.31 (L/Cess) = 46,10,176.31
1
291824
291824.16
Less COST INDEX on DSR( E ) @ -2.73 % i.e Rs. 45,64,531/- (DSR) + 45645.31 (L/Cess) + Rs. 2,91,824.16 (GST difference) = Rs. 49,02,000.47
1
-133824
-133824.61
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 45,64,531/- (DSR) + 45,645.31 (L/Cess) + Rs. 2,91,824.16 (GST difference) + 26,979.10 (DSR Civil) - 1,33,824.61 = Rs. 47,95,154.96
1
-129469
-129469.18
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements