National Security Guard Tender

If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.

National Security Guard - NSG Tender

Works
Electrical and Electronics
Electrical Works
Eprocure
Opening Date4 Nov 2024
Closing Date13 Nov 2024
Tender Amount₹ 57,70,879 
Notes
Download

Costs

Summary

Maintenance Of Security And Street Light Including Cables And Distribution Panels In Mmc-ii (work On Contract Basis).

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Supplying and fixing PVC weatherproof 20 A, 240 V, Switch box, IP66, complete with one 20 A switch on surface or in recess, complete with connections, testing and commissioning etc. as required. (Crabtree ACWCDIW201 /Hensel / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)

1

3013

3013

... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

20

133

2674

... More
Supplying and fixing PVC weatherproof, IP66, 16 A, 240 V, switch and Socket box, IP66, complete with one 16 A switch and socket on surface or in recess, complete with connections, testing and commissioning etc. as required. (Crabtree ACWCKXW163/ Hensel / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)

1

3392

3392

... More
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on surface or recess, , with the help of GI Clamp, including connections etc., complete as required. ( Hensel KF 1600G/ Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)

5

1980

9900

... More
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on surface or recess, with the help of GI Clamp, including connections etc., complete as required. (Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)

5

3001

15005

... More
Street Light Panel-4 No. Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with as per requirement and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 200 amps, 4 strip copper bus bars with heat-shrinkable coloured sleeves, bus bar support at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring with 16 sq.mm copper flexible cable., the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common copper bar of size 20 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 39 (The drawing will be approved before the fabrication of the panel.)

1.2

49302

59162.4

... More
Providing and fixing following switch gears, meters and accessories in existing cubicle panel board including drilling holes in cubicle panel, making connections, testing etc. as required.

-

-

-

... More
63 Amps , FP, MCCB, 25 KA breaking capacity , Ics = 100% Icu with Adjustable overload and fixed short-circuit protection, Spreaders Terminals and Direct Rotary handle. (Incomer)

4

10434

41736

... More
3Ph LED Ammeter Cl 1 with Inbuilt selector switch for 3 phases

4

1156

4624

... More
3Ph LED Voltmeter Cl 1 (0-500V) with Inbuilt selector switch for 3 phases

4

1156

4624

... More
CTs 100/ 5 amps, 5VA with class 1.0 accuracy.

12

628

7536

... More
LED Indicator Red, 240V AC.

4

152

608

... More
LED Indicator Yellow, 240V AC.

4

152

608

... More
LED Indicator Blue, 240V AC.

4

247

988

... More
Supplying, installation, testing and commissioning of Astronomical time switch of following configuration to be mounted in feeder pillars / Lighting DBs for automatic switching On & OFF of street lights at sun set & sun rise or twilight (Auto ON, Auto OFF, Auto modes) with manual override facility with 12/24 hour display format with suitable battery and indication for relay status i/c programming at site complete as required. 1 output per phase and suitable for single phase supply

4

4389

17556

... More
6 amps, 10 KA, 240 V, "C" curve SP MCB

12

296

3552

... More
3 Pole, 415 V, Power Contactor AC3 duty Rating 40 A.

4

4417

17668

... More
Auto manual switch .

4

288

1152

... More
5 A to 32 A, 10 KA, 240 V, "C" curve DP MCB. (OUTGOING)

24

656

15744

... More
Supply, Installation, Testing and commissioning of outdoor type totally enclosed, dust and vermin proof, pedestal mounted INSPECTION BOX / JUNCTION BOX of a suitable size but not less than 600 mm wide X 450 mm height X 450 mm (deep) fabricated from 2 mm thick CRCA sheet steel having front and back openable doors with locking arrangement on both sides, tapered top (roof), including detachable cable gland plates made of 3 mm thick CRCA sheet, including pre-paint treatment, phosphating and powder coating by approved Siemens grey paint, consisting of 300 Amps 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC / SMC bus bar supports at required intervals, etc. as required, suitable for operation on 433 volts, 50 Hz, 3-phase, 4-wire A.C. supply system, the entire panel shall have one common G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs or terminals, a danger notice plate fixed, etc., complete as required. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground).

1

8628

8628

... More
Supply, Installation, Testing and commissioning of outdoor type totally enclosed, dust and vermin proof, pedestal mounted INSPECTION BOX / JUNCTION BOX of a suitable size but not less than 600 mm wide X 600 mm height X 450 mm (deep) fabricated from 2 mm thick CRCA sheet steel having front and back openable doors with locking arrangement on both sides, tapered top (roof), including detachable cable gland plates made of 3 mm thick CRCA sheet, including pre-paint treatment, phosphating and powder coating by approved Siemens grey paint, consisting of 500 Amps 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC / SMC bus bar supports at required intervals, etc. as required, suitable for operation on 433 volts, 50 Hz, 3-phase, 4-wire A.C. supply system, the entire panel shall have one common G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs or terminals, a danger notice plate fixed, etc., complete as required. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground)..

1

15918

15918

... More
Supplying and fixing Cable Junction Boxes, IP 66 weatherproof, size 155 mm x 210 mm x 92 mm, , with the help of GI Clamp, with 5 Nos two-way terminals mounted on DIN rail suitable for termination of 16 sq mm cable, on the surface or in recess, complete, etc. as required.) (Make Hensel KF 1616G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO/SCHNEIDER )

15

3040

45600

... More
Supplying and fixing Cable Junction Boxes, IP 66 weatherproof, , with the help of GI Clamp, with 5 Nos two-way terminals mounted on DIN rail suitable for termination of 4 sq mm cable, on the surface or in recess, complete, etc. as required.) (Make Hensel KF 0404G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO/SCHNEIDER )

10

1010

10100

... More
Supplying and fixing feed through terminal 100 A in the existing looping box/junction box, including connection, etc., as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

63

630

... More
Supplying and fixing feed through terminal 75 A in the existing looping box/junction box, including connection, etc., as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

42

420

... More
Supplying and fixing shorting link suitable for 75 A feed through terminals in existing looping box/junction box, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

19

190

... More
Supplying and fixing shorting link suitable for 100 A feed through terminals in existing looping box/junction box, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

22

220

... More
Supplying and fixing end plates for 75A feed through terminals in existing looping boxes/ junction boxes, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

11

110

... More
Supplying and fixing end plates for 100A feed through terminals in existing looping boxes/ junction boxes, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

11

110

... More
Supplying and fixing End Clamps for feed-through terminals on the existing DIN rail in the existing looping box/ junction boxes, etc. as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

10

11

110

... More
Supplying and fixing din rail mounted earth terminal suitable for 4 sq mm wire in the existing looping box/junction box, including connection, etc., as required. (Connect well/Elmex/ Phoenix/ Wago/ Essen)

30

70

2100

... More
Supplying and fixing a PVC cable gland suitable for up to 6 sq mm of copper conductor cable in the existing polycarbonate cable junction box, including connections, etc. as required. (Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand)

10

23

230

... More
Supplying and fixing a PVC cable gland suitable for 2 x 10/ 16 sq mm armoured XLPE cable in the existing polycarbonate cable junction box, including connections, etc. as required. (Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand/Trinity Touch)

20

53

1060

... More
Supplying and fixing a PVC cable gland suitable for 2 x 25 sq mm armoured XLPE cable in the existing polycarbonate cable junction box, including connections, etc. as required. (Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand/Trinity Touch)

20

69

1380

... More
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 100 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos. v) End Clamps - 2 Nos vi) SP MCB "C" curve, 10KA, 6 A - 1Nos. v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO) Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand /Trinity Touch

100

3953

395300

... More
The road crossings of power cable through trenchless boring. Trenchless horizontal boring using Manual/ Machine Moling technique at 1.20 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required. The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition. Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department. The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length. i) Upto 200 mm dia DWC HDPE / G.I. /PVC

10

1196

11960

... More
The road crossings of power cable through trenchless boring. Trenchless horizontal boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required. The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition. Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department. The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length. i) Upto 200 mm dia DWC HDPE / G.I. /PVC

50

651

32550

... More
Supplying, installation, testing and commissioning of 25 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire driver should have an operating voltage range of 140-270 Volt, a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 100 lm/W. The luminaire shall be designed for a system life of 50,000 hours and suitable for mounting on pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.

2

2836

5672

... More
Supplying, installation, testing and commissioning of 45 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire driver should have an operating voltage range of 140-270 Volt, a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 100 lm/W. The luminaire shall be designed for a system life of 50,000 hours and suitable for mounting on pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.

50

4774

238700

... More
Supplying, installation, testing and commissioning of 70 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire driver should have an operating voltage range of 140-270 Volt, a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 100 lm/W. The luminaire shall be designed for a system life of 50,000 hours and suitable for mounting on pole bracket up to outer dia 50 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.

15

6345

95175

... More
Supplying, installation, testing and commissioning of 90 Watt LED street light luminaire made up of die-cast aluminium housing, with IP66 degree of protection, complete with the driver, LEDs with optical lens, toughened glass cover, etc. The luminaire driver should have an operating voltage range of 140-270 Volt, a mechanical impact resistance rating of lk=07. surge protection of ≥ 10KV, PF≥ 0.90 and minimum system luminous efficacy of 100 lm/W. The luminaire shall be designed for a system life of 50,000 hours and suitable for mounting on pole bracket up to outer dia 54 mm, including installation on existing street light pole bracket connections and earthing etc., as required. LM 79 and LM 80 reports need to be submitted from a NABL/UL accredited lab to verify the above parameters.

2

10172

20344

... More
Supplying, installation, testing, and commissioning 100 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of ≥ 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)

1

7446

7446

... More
Supplying, installation, testing, and commissioning 200 W LED floodlight luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium housing, including installation of floodlights, on-wall or existing street light pole brackets and connections, earthing, including providing fixing bolts, nuts, and washers, etc., as required. The fixture should have a minimum system efficacy of 100 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK =07. The fixture driver should have an operating voltage range of 140–270 V, surge protection of ≥ 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havell, Lighting Technology, and Bajaj)

1

13309

13309

... More
Supplying, installation testing, and commissioning 100 W highbay LED luminaire, complete with driver, LEDs with optical lenses, toughened glass cover, mounting bracket, and pressure-die-cast aluminium alloy housing, including installation of luminaire on the ceiling, including connections, earthing, providing fixing fasteners, etc., as required. The fixture should have a minimum system efficacy of 140 lumens per watt, ingress protection of IP66, and a mechanical impact resistance rating of IK = 7. The fixture driver should have an operating voltage range of 140–270 V, surge protection of ≥ 10 KV, and a PF of 0.9. The fixture shall be designed for a system life of 50,000 hours at 70% lumen maintenance. LM 79 and LM 80 reports need to be submitted from a NABL or UL-accredited lab to verify the above parameters. The contractor shall provide a warranty for the above-LED light fixtures for five years. (Approved Manufacturers: Phillips, Havells, Wipro, and Bajaj)

1

11600

11600

... More
Supplying, installation, testing, and commissioning of 10 to 11 Watt, 0.6 Metre (nominal size) LED Bollard Light fitting complete with LED module, electronic driver, diffuser, and all other accessories, minimum system luminous efficacy of 80 lm/W, the bollard housing should be made up of metallic pipe duly powder coated with the mounting flange at the bottom, including providing 3 nos M10 foundation bolts, two numbers 32 mm. dia PVC pipe for cable entry (from the bottom of the foundation to the top of the foundation for cable entry), and providing the foundation of Cement concrete 1:3:6 (1 cement : 3 coarse sand: 6 graded stone aggregate 20 mm nominal size ) of size 0.3-metre dia and 750 mm height (250mm above ground and 500 mm below ground) including excavation as required and complete with connections, lugs, terminals, connectors for the connection of cable and wires in the fitting etc., complete as required. (Make Havells /Philips /Wipro as per sample approved by Engineer -in - Charge)

5

8394

41970

... More
Supply, installation, testing and commissioning of 25 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj

1

7134

7134

... More
Supply, installation, testing and commissioning of 45 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj

2

10103

20206

... More
Supplying, installation, testing, commissioning & erection of 3 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont

1

14879

14879

... More
Supplying, installation, testing, commissioning & erection of 6 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos, 16 mm dia, 450 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 1 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 400 mm x 400 mm x 1200 mm (200mm above ground and 1000 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more) horizontal tor bar stirrup 8mm dia @150c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont

25

24125

603125

... More
Supplying, installation, testing, commissioning & erection of 7 metres long continously tapered Hot-dip Galvanized octagonal street light poles with top dia. 70 mm and bottom dia. 130 mm made of 3 mm thick sheet steel with a base plate of size not less than 200 x 200 x 12 mm, including 4 Nos. 20 mm dia, 600 mm long G.I. foundation bolts with the nuts, with supply and embedding 2 Nos. 50 mm dia DWC HDPE pipe sleeve for cable entry, with inbuilt cable end box, supplying fixing 3 nos 'C' series 6 amp, 10 KA, SP MCB, including providing fixing DIN rail, 60 amps connectors for termination of 2x 25 sq mm incoming and outgoing cables mounted on bakelite sheet of 6 mm thick, including providing foundation of cement concrete 1:1.5:3 (1cement: 1.5 coarse sand: 3 graded stone aggregate 20 mm nominal size) pedestal of size 450 mm x 450 mm x 1700 mm (200mm above ground and 1500 mm below ground) with steel reinforcement of (Thermo-Mechanically Treated bars of grade Fe-500D or more)horizontal tor bar stirrup 8mm dia @190c/c, verticle bars 4 nos, 12 mm dia including excavation as required, including all necessary lugs, earthing terminal etc., complete as required. (Without street light bracket) Make : Bajaj/ Philips / Havells/ Transrail / Valmont

1

27897

27897

... More
Supplying and fixing of hot-dipped 1 metre galvanised M.S. single arm bracket made of 40 mm NB dia. GI pipe with a cap of 300 mm length and of suitable dia to mount on octagonal pole having a top of 70 mm A/F with nut bolts, etc., as required.( For 5 - 7 Mtr Pole)

20

2774

55480

... More
Supplying and fixing of hot-dipped 1 metre galvanised M.S. double arm bracket made of 40 mm NB dia. GI pipe with a cap of 300 mm length and of suitable dia to mount on octagonal pole having a top of 70 mm A/F with nut bolts, etc., as required. (For 5- 7 meter Pole)

5

3988

19940

... More
Supply and installation of round bracket (ring type) suitable for mounting four floodlights. The round bracket should be made of 40 dia. (nominal bore) B-Class G.I. pipe on the periphery and four supports (spokes) of 40 mm B-Class G.I. pipe duly welded with a pole cap of 300 mm length at the centre. The pole cap should be of suitable dia for mounting on an existing polygonal pole with a top dia. of 70 mm. The dia. of the round bracket should not be less than 120 cm. The bracket pipes should be suitable for acting as conduits for wires for the wiring of floodlights. The pole cap should have four holes and four numbers of G.I. nuts and bolts for fixing the bracket on the top of the polygonal pole. (drawing will be get approved before fabrication ) ( For Center Pole)

1

4163

4163

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :

-

-

-

... More
1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

15

7294

109420.5

... More
1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)

5

7878

39392.5

... More
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.

-

-

-

... More
Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

10

2434

24342.5

... More
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.

2

3551

7102.5

... More
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.

-

-

-

... More
Bituminous portion

2

5032

10064.5

... More
Centering and shuttering including strutting, propping etc. and removal of form for

-

-

-

... More
Foundations, footings, bases of columns, etc. for mass concrete (For Foundation of Pole)

50

392

19607.5

... More
Providing and making steel pole collar with cement concrete (1 cement : 3 coarse sand : 6 stone aggregate 20mm) of specified size and shape including form work, plastering if required, curing etc as required. (volume of pole/ pipe not to be deducted)

5

8135

40675

... More
Painting of a street light pole following height including brackets, metal looping box, clamps, etc., fixed on the pole with two or more coats of aluminium paint of an approved brand and manufacture of the required color to give an even shade, including scraping, finishing the surface, applying a coat of red oxide, and finally numbering the pole with black and yellow synthetic enamel paint as per directions of the engineer-in-charge, etc., complete as required. (Primer: Asian Paints, Berger, and Nerolac make Asian Paints 3 Mangoes Aluminium Paint or a similar from Berger or Nerolac.)

-

-

-

... More
Pole height above ground above 5 metre and upto 7 metre.

50

753

37650

... More
Pole height above ground above 7 metre and upto 10 metre.

20

901

18020

... More
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : (Note:- For Panel & Metallic Plate. Complete with scrapping as required)

-

-

-

... More
One or more coats on old work

50

102

5140

... More
Re-lettering with black Japan paint of approved brand and manufacture. ( Note:- For Panel Only)

500

3

1925

... More
Supplying and embedding following dia G.I. pipe (medium class) in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required. [Make-Zenith/TATA/Jindal]

-

-

-

... More
32 mm dia

50

525

26250

... More
40 mm dia

15

589

8835

... More
Providing and erection of G.I. pipe medium class of the following diameter in the existing gate pillar for fixing the post-top lantern, including making holes and embedding the required length of the pipe in the pillar top, and making good the damage with matching concrete, plastering, and painting after the erection of the pipe, etc., complete as per the direction of the engineer-in-charge.

-

-

-

... More
G.I. pipe 50 mm dia

4

716

2864

... More
G.I. pipe 65 mm dia

4

880

3520

... More
Earthing with GI Earth plate 600mm x600mmx6mm thick including Accessories and providing mosnary enclosure with cover plate having locking arrangement and watering pipe of 2.7 mtr. Long etc. with charcoal /coke and salt as required.

8

7472

59776

... More
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

8

6855

54840

... More
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

10

706

7060

... More
Providing & Fixing 25mmx5mm GI strip on surface or in reccess for connections etc. as required.

60

244

14640

... More
Providing and fixing 6 SWG dia GI Wire on surface or in reccess for loop earthing alongwith existing surface/ reccess conduit / sub main wiring / cable as reqired.

2500

42

105000

... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

30

706

21180

... More
Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.

2

1477

2954

... More
Location, tracing and pin-pointing of faults in existing 1.1 KV and 11KV grade underground cables, including disconnection of the cable at both ends, finding the route of the cable, excavation at the fault point to make the fault point visible, making temporary joints ( in case of LT cable), testing the cable on load for three hours, including refilling the excavated trench and cleaning the site, etc. as required. [Permanent joints are paid separately ].

15

9074

136110

... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size diretc in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

-

-

-

... More
2 x 16 sq mm

10

280

2800

... More
2 x 25 sq mm

10

296

2960

... More
3.5 x 35 sq mm

10

521

5210

... More
3.5 x 70 sq mm

5

943

4715

... More
3.5 x 120 sq mm

5

1465

7325

... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing RCC/ HUME/ METAL/ DWC/PVC pipe as required.

-

-

-

... More
2 x 16 sq mm

2800

291

814800

... More
2 x 25 sq mm

260

307

79820

... More
3.5 x 35 sq mm

500

531

265500

... More
3.5 x 70 sq mm

20

957

19140

... More
3.5 x 120 sq mm

50

1482

74100

... More
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose /loop/ in panel for connections etc as required.

-

-

-

... More
2 x 16 sq mm

300

280

84000

... More
2 x 25 sq mm

50

296

14800

... More
3.5 x 35 sq mm

30

521

15630

... More
3.5 x 70 sq mm

5

943

4715

... More
3.5 x 120 sq mm

10

1465

14650

... More
Supplying, Laying and fixing of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size on wall surface as required.

-

-

-

... More
2 x 16 sq mm (clamped with 1mm thick saddle)

10

309

3090

... More
2 x 25 sq mm (clamped with 1mm thick saddle)

10

325

3250

... More
3.5 x 35 sq mm (clamped with 1mm thick saddle)

10

565

5650

... More
3.5 x 70 sq mm (clamped with 25 x 3 mm MS flat iron clamp)

5

1064

5320

... More
3.5 x 120 sq mm (clamped with 40 x 3 mm MS flat iron clamp)

5

1607

8035

... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

-

-

-

... More
2 X 10 sq. mm (19mm)

30

241

7230

... More
2 X 16 sq. mm (22mm)

20

256

5120

... More
2 X 25 sq. mm (22mm)

10

259

2590

... More
4 X 25 sq. mm (28mm)

10

315

3150

... More
3½ X 35 sq. mm (32mm)

4

369

1476

... More
3½ X 50 sq. mm (35mm)

4

413

1652

... More
3½ X 95 sq. mm (45mm)

4

588

2352

... More
3½ X 150 sq. mm (50mm)

4

697

2788

... More
3½ X 185 sq. mm (57mm)

4

875

3500

... More
3½ X 240 sq. mm (62mm)

4

1027

4108

... More
Supplying and making straight through joint with heat shrinkable kit including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

-

-

-

... More
2 X 16

20

2168

43360

... More
2 X 25

15

2478

37170

... More
4 X 25

10

2478

24780

... More
3.5 X 35

5

2478

12390

... More
3.5 X 50

5

2478

12390

... More
3.5 X 95

5

3517

17585

... More
3.5 X 150

5

4538

22690

... More
3.5 X 185

5

4538

22690

... More
3.5 X 240

5

4919

24595

... More
Providing and installing a heavy-duty 3-inch weld on Barrel metal Hinge on the doors of existing Indoor/Outdoor LT-panel/Feeder Doors by means of welding and painting the entire weld-affected surface with 2 or more coats of synthetic enamel paint after 1 coat of red oxide to match the finishing of the weld-affected area to the adjacent surface, etc., as required.

30

121

3630

... More
Providing and fixing universal type SS door lock mechanism for existing Indoor/Outdoor LT-panel/Feeder Doors including making holes, ensuring its tight placement without any free-play by way of suitable rubber/solvent seals etc as required

20

79

1580

... More
Providing & fixing 3 mm thick CRCA gland plate of required size, duly treated and painted, in existing indoor/outdoor LT panel/feeder/Junction feeder box and making necessary holes in the gland plate for management of the existing cables in the panel/feeder, including taking out the existing gland, lugs, cables and re-fixing etc., as required. [Lugs/Thimbles or glands, if required, will be paid separately]

1

4436

4436

... More
Fabrications, supplying and fixing of covers of the required shape and size in the existing electrical cubical panel boards/distribution boards/ feeder pillars /pole box at different locations made out from 2 mm thick CRCA sheet with locking arrangement, hinges and matching with the existing doors of the panel including painting with an approved shade of two coats of synthetic enamel paint over an undercoat of steel primer etc., complete as required.

1

7063

7063

... More
Welding by gas or electric plant including transportation of plant at site etc. complete.

30

3

111

... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

-

-

-

... More
Single pole

50

256

12800

... More
Double pole

20

656

13120

... More
Triple pole

10

1007

10070

... More
Supplying and fixing 40-63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of Double poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

10

1213

12130

... More
Supplying and fixing 40-63 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of Tripple poles & Neutral in the existing MCB DB complete with connections, testing and commissioning etc. as required.

10

2324

23240

... More
Providing and fixing following rating and breaking capacity and pole MCCB with Microprocessor release with overload, short circuit and earth fault protection and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

-

-

-

... More
63 Amp, 25 KA, FP MCCB, Ics= 100% of Icu

2

9914

19828

... More
250 A, 36 KA, FP MCCB, Ics= 100% of Icu

1

48377

48377

... More
250 A, 50 KA, FP MCCB, Ics= 100% of Icu

1

50966

50966

... More
Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

-

-

-

... More
100 Amp, 16 KA, TPMCCB

2

3777

7554

... More
125 Amp, 16 KA, TPMCCB

2

4821

9642

... More
160 Amp, 16 KA, TPMCCB

1

5992

5992

... More
200 Amp, 16 KA, TPMCCB

1

7691

7691

... More
100 Amp, 30KA, FPMCCB

1

7723

7723

... More
125 Amp, 36KA, FPMCCB

1

8209

8209

... More
200 Amp, 36KA, FPMCCB

1

15206

15206

... More
250 Amp, 36KA, FPMCCB

1

17510

17510

... More
250 Amp, 50KA, FPMCCB

1

18411

18411

... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

25

286

7171.25

... More
Excavation for cable trenches in soft soil, depth upto 1.2 m including dressing of sides lift upto 1.5 m, including getting out the excavated soil, refilling with sand and or good soil after laying of cable/ pipe etc in layers of 20 cm, ramming, watering and disposal of surplus excavated soil as directed, within a lead of 50 metres.

15

654

9810

... More
Deduct for not consolidation by ramming and watering while re-filling with sand and or good soil in cable/ pipe laying.

10

145

1450

... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep)and re-filling etc as required

-

-

-

... More
50 mm dia

30

850

25500

... More
80 mm dia

20

1291

25820

... More
100 mm dia

10

1806

18060

... More
150 mm dia

10

2740

27400

... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.

-

-

-

... More
40 mm dia (OD-40 mm & ID-32 mm nominal)

2000

203

406000

... More
63 mm dia (OD-63 mm & ID-51 mm nominal)

1000

247

247000

... More
90 mm dia (OD-90 mm & ID-76 mm nominal)

50

290

14500

... More
120 mm dia (OD-120 mm & ID-103 mm nominal)

20

368

7360

... More
160 mm dia (OD-160 mm & ID-135 mm nominal)

20

481

9620

... More
Supplying and fixing of light class G.I. pipe of 50 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

10

2564

25640

... More
Supplying and fixing of light class G.I. pipe of 80 mm dia. (nominal) 3 metres length along the pole for protection of under ground cable as required.

2

3606

7212

... More
Supplying and making cable route marker with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) of size 60 cm X 60 cm at the bottom and 50 cm X 50 cm at the top with a thickness of 10cm including inscription duly engraved as required.

40

558

22320

... More
Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required.

30

269

8070

... More
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections interconeection along with end temination of service cable complete etc. as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 75 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos. v) End Clamps - 2 Nos vi) SP MCB "C" curve, 10KA, 6 A - 1Nos. v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 1600G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO) Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand

10

2807

28070

... More
Supplying and fixing sheet steel Enclosure suitable for 125A TP&N MCCB , on surface/ recess, complete with neutral Link, powder painted including earthing etc. as required. (But without MCCB)

1

2336

2336

... More
Providing and fixing 125 A, 4 pole, 415 V, category AC-23A. On Load Change Over Switch, in sheet steel enclosure in existing panel board /wall including drilling holes, making connections, etc. as required. ( Make: Socomec / L&T/ Legrand /ABB /Schneider/ Havells/ Siemen)

1

10612

10612

... More
Providing and fixing 315 A, 4 pole, 415 V, category AC-23A. On Load Change Over Switch, in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ( Make: Socomec / L&T/ Legrand /ABB /Schneider/ Havells/ Siemen)

1

16973

16973

... More
Providing and fixing 400 A, 4 pole, 415 V, category AC-23A. On Load Change Over Switch, in open execution in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. ( Make: Socomec / L&T/ Legrand /ABB /Schneider/ Havells/ Siemen)

1

24857

24857

... More
Dismanttling of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC. Upto 35 sq.mm

510

32

16320

... More
Dismanttling of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC. Above 35 sq. mm and upto 95 sq. mm

50

53

2650

... More
Dismanttling of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC. Above 95 sq. mm and upto 185 sq. mm

20

75

1500

... More
Dismanttling of cable from already excavated ground, pipe, and disconnection from existing panel, box etc complete with shifting of material to respective MMC. Above 185 sq. mm and upto 400 sq. mm

20

139

2780

... More
Dismantle of Metallic Pole Box including properly dressing the wire & cable from dismantled pole box complete etc. as required.

50

166

8300

... More
Dismantle of Non-Metallic Pole Box including properly dressing the wire & cable from dismantled pole box complete etc. as required.

100

118

11800

... More
Supplying and laying of G.I. pipe of 50 mm dia.(nominal), medium class, ISI marked in wall / floor including cutting chase, and making good the wall/ floor and finishing with matching surface after housing G.I. pipe in chase. ( for protection of UG cable)

10

1391

13910

... More
Supplying and laying of 63 mm dia (OD-63 mm & ID-51 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in the ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering, including dismantling of the existing underground cable of size 2 x 16 sq mm cable laid in the trench and credit for same etc., complete as required.

10

221

2210

... More
Supplying and embedding following dia PVC pipe in pole collar/ foundation (during casting) for cable entry including bending the pipe to the required shape complete as required.

-

-

-

... More
32 mm dia

10

120

1200

... More
50 mm dia

10

190

1900

... More
Providing and fixing Din-rail 35 mm x 7.5 mm on exisitng panel etc., as required. i) Din-rail 35 mm x 7.5 mm

2

379

758

... More
Supplying and fixing 2 way, 60 Amp, two way connectors on the existing looping box including connection etc as required.

2

107

214

... More
Providing and fixing G.I. reducer on existing street light pole bracket of size 60 mm x 50 mm with nut and bolts for fixing. (As per sample provided by the department)

2

398

796

... More
Supplying and fixingfollowing thickness Bakelite Sheet with screw in the existing looping box including cutting the sheet to required shape and size complete etc as reqd.

-

-

-

0.5

4317

2158.5

0.5

7432

3716

... More
Supplying and fixing 300 Amps capacity aluminium bus bar having nominal current density 130 Amp/sq. cm in the existing pnael complete with bus bar supports and insulated by means of PVC sleeves and holes for connections etc as required.

0.1

713

71.3

... More
Supplying and fixing following way, single pole and neutral, PVC Weatherproof IP65, MCB distribution board, 240 volts, on surface/ recess, complete with din bar etc. as required. (But without MCB/RCCB/Isolator).

-

-

-

... More
PVC Weatherproof 4 module MCB DB with DIN rail

1

2538

2538

... More
PVC Weatherproof 8 module MCB DB with DIN rail

1

3406

3406

... More
Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

1

124

124

... More
Credit for dismantled aluminium conductor XLPE insulated and PVC sheathed UG cable of 1.1KV grade and 6 SWG G.I.wires laid along the cable of following sizes.

-

-

-

... More
2 x 16 sq. mm

500

-28

-14000

... More
2 x 25 sq. mm

200

-33

-6600

... More
3.5 x 35 sq. mm

20

-58

-1160

... More
3.5 x 50 sq. mm

10

-74

-740

... More
3.5 x 70 sq. mm

10

-94

-940

... More
3.5 x 95 sq. mm

10

-118

-1180

... More
3.5 x 120 sq. mm

10

-140

-1400

... More
3.5 x 150 sq. mm

10

-165

-1650

... More
3.5 x 185 sq. mm

10

-201

-2010

... More
3.5 x 240 sq. mm

10

-248

-2480

... More
3.5 x 300 sq. mm

20

-300

-6000

... More
3.5 x 400 sq. mm

10

-371

-3710

... More
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 12,13,368/-

1

12133

12133.68

... More
Add Difference in GST of (18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 12,13,368/- (DSR) + 12,133.68 (L/Cess) = 12,25,501.68/-

1

77574

77574.26

... More
Less COST INDEX on DSR(E) @ -2.73 % i.e Rs. 12,13,368/- (DSR) + 12,133.68(L/Cess) + Rs. 77,574.26 (GST difference) = Rs. 13,03,075.94/-

1

-35573

-35573.97

... More
Correction factor on existing items of DSR @0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e Rs. 12,13,368/- (DSR) + 12,133.68(L/Cess) + Rs. 77,574.26 (GST difference) + 2,26,951.25/- (DSR Civil) - 35,573.97 (Correction) = Rs. 14,94,453.22/-

1

-40350

-40350.24



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.