National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 95,356Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_834918_1Tender No
46/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Providing and laying in position excluding cement concrete of level: specified grade the cost of centering and shuttering - All work up to plinth
-
-
-
1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
5.8
8340
48376.93
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
14.58
6518
95041.19
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
26.17
9045
236727.28
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement:
-
-
-
1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
15.36
10852
166701.31
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Foundations, footings, bases of columns, etc. for mass concrete
88.56
392
34728.8
Shelves (Cast in situ)
102
927
94579.5
Lintels, beams, plinth beams, girders, bressumers and cantilevers
124.32
736
91549.25
Columns, Pillars, Piers, Abutments, Posts and Struts
43.2
961
41528.16
Edges of slabs and breaks in floors and walls
-
-
-
Under 20 cm wide
100
208
20855
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
4200
107
452970
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6(1 cement :6 coarse sand)
3.58
7132
25533.46
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6(1 cement : 6 coarse sand)
38.28
9105
348575.77
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:4(1 cement :4 coarse sand)
9
1123
10114.2
Extra for providing and placing in position 2 Nos 6 mm dia. M.S. bars at every third course of half brick masonry.
9
104
943.2
Honey-comb brick work 10 / 11.4 cm thick with common burnt clay bricks of class designation 7.5 in super structure above plinth level upto floor V level with cement mortar 1:4(1 cement : 4 coarse sand).
18.4
711
13091.6
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, door/window sills, jambs, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqnn
2
5413
10827
Area of slab over 0.50 sqm
2
5136
10272.6
Extra for providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ Granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.
4
978
3914.8
Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.
67.2
1267
85206.24
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
250x16 mm
6
260
1563.6
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
200x10 mm
6
99
598.2
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
100 mm
14
59
833.7
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
15
570
8564.25
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856, complete as per direction of Engineer-in-charge.
5.04
4488
22624.31
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.
200
133
26740
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using M.S. angels 40x40x6 mm for diagonal braces
5.04
5804
29253.92
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
3490
194
678456
Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
246
97
23911.2
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
180
172
31068
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :
-
-
-
25 mm thick
60
1948
116895
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
3.4
2354
8005.98
Providing and laying Vitrified tiles in floor in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.
-
-
-
Glazed Vitrified tiles Matt/Antiskid finish of size
-
-
-
Size of Tile 600 x 600 mm
25.5
1464
37353.68
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.
-
-
-
110 mm diameter
60
377
22644
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
10
136
1361.5
Single tee with door
-
-
-
110x110x110 mm
10
234
2341.5
Single tee without door
-
-
-
110x110x110 mm
20
221
4427
Bend 87.5°
-
-
-
110 mm bend
20
150
3007
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
10
371
3713
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm or more as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
132
738
97501.8
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm or more as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500- 600mm)
22.2
532
11818.17
12 mm cement plaster of mix: (including height up to 10 metre)
-
-
-
1:6 (1 cement: 6 coarse sand)
191.4
343
65774.61
15 mm cement plaster on rough side of single or half brick wall of mix: (including height up to 10 metre)
-
-
-
1:6(1 cement: 6 coarse sand)
158
395
62465.3
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:
-
-
-
New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
500
171
85550
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
200
155
31180
Demolishing cement concrete manually/ by mechanical means including disposal of material lead within NSG campus as per direction of engineer in charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
3.78
2434
9201.47
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:
-
-
-
White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests
1
6767
6767.4
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
1
6515
6515.55
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
32 mm dia
10
103
1039
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 1500x450 mm
2
2093
4186
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
20 mm nominal dia Pipes
80
537
43008
25 mm nominal dia Pipes
30
627
18817.5
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall
-
-
-
25 mm dia nominal bore
30
551
16551
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
2
622
1244.8
20 mm nominal bore
2
539
1079.9
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
15 mm nominal bore
10
97
977.5
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately.
2000
11
22000
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
4
506
2027.2
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.
-
-
-
15 mm nominal bore
2
798
1597.9
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
10
574
5743
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
100 mm nominal dia
5
37
188
125 mm nominal dia with 25 mm waste hole
10
51
518.5
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design:
-
-
-
100x100 mm size P type
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
2707
5415.3
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :
-
-
-
300 mm dia. R.C.C. pipe
30
994
29829
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
2
12770
25541.1
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
202.5
530
107507.25
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
135
634
85650.75
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
13.5
1505
20320.88
Providing and fixing Pressmatic valve of approved quality conforming to IS standards and weighing not less than 500 gms.
6
1216
7297.98
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, and C.I. trap for standard urinal with vent arm with operating and other couplings in C.P.brass: 50 mm dia other couplings in C.P. brass, including cutting and making good the walls and floors wherever required.
6
3335
20015.82
Providing and fixing GI chicken wire mess at junction of brick work and RCC work including screw /nails etc complete. (Including height up to 10.0 Meter)
5
140
703.7
Design,Supply, Fabrication and Installation of Membrane Panels & steel cables and GI corner fittings nuts and bolts and associated accessories with PVC/PVDF coated membrane works. Membrane shall be PVC/PVDF coating with HT Polyster Yarns of 1100 Dtex and Type 2 from serge Ferrari (902s2) Mehlar or equivalent (T-II) with minimum weight of 900 gsm minimum tear strength wrap/weft /weft4200/4000 n/5cm minimum tear strength warp/weft550/500N. Fabric Flame Retardency and warranty of 10 years. The design complies with the requirements of BS and EU standards.The tensioned membrane structural shall include engineering design of structural membrane and accessory parts.The work shall include CHS member of YST 310 mpa plate YST 245 MPa Anchor bolts nuts and washer are to be HDG GR 8.8 Structural steel should be with class A HDG wire rope with minimum tensile strength of 1570 Mpa and singal construction, swagged cable and connectors. (The structures steel members will be paid seperately). Manufacturing warranty of 10 years has to be submitted by the contractor. The contractor shall provide orignal manufacturer warranty of 10 years.Actual surface area of walk away end to end shall be measured.(Rate includes cost of fabric patterns, cutting,forming,fabrication hot weld stich of fabric transportation to the sites assembaling and installation,hardware,EPDM Gasket and required accessories wherever required complete including lifts up to all height, tools and plants and necessary scaffolding etc required for all operations in all respect as per direction of EIC.)
153.6
3439
528230.4
Deduct GST Factor on DSR-2023 Items @ total of DSR rates - 0.973 of DSR rates) i.e 3602431.69 - (0.973 x 3602431.69)
1
-97265
-97265.66
Electrical
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
5
1015
5075
Group C
5
1467
7335
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed steel/PVC conduit including dismantling as required.
-
-
-
Group A
5
574
2870
Group C
5
894
4470
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group A
5
649
3245
Group C
5
858
4290
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
334
6680
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit alongwith 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
20
537
10740
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
10
233
2330
2 X 6 sq. mm + 1 X 6 sq. mm earth wire
10
439
4390
2 X 10 sq. mm + 1 X 6 sq. mm earth wire
10
570
5700
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
3 X 1.5 Sq.mm
20
95
1900
3 x4 Sq.mm
20
206
4120
6 x4 Sq.mm
20
396
7920
3 X 6 Sq.mm
20
304
6080
3 X 10 Sq.mm
20
514
10280
2 X 10 + 1 X 6 Sq.mm
20
451
9020
4 X 10 + 2 X 6 Sq.mm
20
890
17800
1 x 4 Sq.mm
10
85
850
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
20
128
2560
25 mm
20
145
2900
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mmX75mm)
2
298
596
3 Module (100mmX75mm)
2
327
654
4 Module (125mmX75mm
2
343
686
6 Module (200mmX75mm)
1
402
402
8 Module (125mmX125mm)
1
454
454
12 Module (200mmX150mm)
1
547
547
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amp switch
35
103
3605
15/16 amp switch
10
156
1560
3 pin 5/6 A socket outlet
35
122
4270
6 pin 15/16 A socket outlet
10
197
1970
Supplying and fixing two module stepped type electronic modular fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
10
369
3690
Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc. as required.
-
-
-
5/6 amps switch
5
52
260
15/16 A switch
2
121
242
3 pin 5/6 A socket outlet
2
69
138
6 pin 15/16 A socket outlet
2
137
274
Supply & Fixing suitable size GI Box with modular plate and cover in front on surface or in reccess including provising and fixing 6 pin 5/6 and 15/16 amps moduler socket outlet and 15/16 amps moduler switch connection ect. as required.
26
586
15236
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 3 pin 5/6 A modular socket outlet and 2 nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
15
680
10200
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
5
477
2385
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 16 A modular socket outlet and 16 A/25 A SP MCB, "C" curve including connections, painting etc. as required. (For Geyser)
10
837
8370
Supplying and fixing suitable size GI/ PVC box with modular plate and cover in front on surface or in recess, including providng and fixing 2 nos. 6 pin 15/16 A modular socket outlet and 2 nos. 15/16 A modular switch, connections etc. as required.
5
975
4875
Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required.
5
87
435
Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.
-
-
-
1 or 2 Module
1
133
133
3 Module
1
151
151
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
10
40
400
Providing and fixing 3 mm thick PVC/ phenolic laminated round sheet cover with a minimum of 170 mm dia on the existing fan box with two screws, etc., as required.
5
31
155
Providing and fixing 3 mm thick PVC / phenolic laminated round sheet cover on the existing junction box with two screws, etc., as required.
5
12
60
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
5
110
550
Supplying and fixing extra down rod of 10 cm length G.I. pipe ,15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
46
230
Supplying and fixing extra conduit down rod of 20 cm length G.I. pipe 15 mm dia, heavy gauge including painting etc. as required. (Note : More than 5 cm length shall be rounded to the nearest 10 cm and 5 cm or less shall be ignored)
5
52
260
Supplying and fixing PRCD (Portable Residual Current Device) Plug top, 16 A 30 mA rating including connection etc. as required.
2
777
1554
Supplying and fixing Plug top following rating including connection etc. as required.
-
-
-
16 A 3/6 Pin Plug top
2
123
246
6 A 3/6 Pin Plug Top
2
100
200
Providing and fixing 16 mm M.S. Fan clamps of standard shape and size in existing R.C.C. slab, including cutting chase, anchoring clamp to reinforcement bar, including cleaning, refilling, making good the chase with matching concrete, plastering and painting the exposed portion of the clamps complete.
2
563
1127.8
Providing and fixing Din-rail 35 mm x 7.5 mm on exisitng panel etc., as required.
1
142
142
Supplying and fixing 2 way, 60 Amp, two way connectors on the existing looping box including connection etc as required.
10
107
1070
Supplying and fixing Bakelite Sheet with screw in the existing looping box/Panel including cutting the sheet to required shape and size complete etc as reqd.
-
-
-
6 mm thick
0.1
4317
431.7
Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Ventil Air or with similar specifications C&G / Orient / Usha / Almonard)
1
2285
2285
Supplying and installation of following size PVC Exhaust fan with louver shutter in the existing opening, including making good the damage, connection, testing , commissioning etc as required.
-
-
-
200 mm sweep in size
1
2282
2282
Supplying and installation of following sweep, 1400 RPM heavy-duty, single phase, metallic exhaust fan Conforming to IS:2312 -1967 in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Turbo force Heavy Duty Exhaust Fan or with similar specifications C&G / Orient / Usha / Almonard)
-
-
-
300 mm sweep
2
5070
10140
Making holes of the required size and shape in a brick masonry wall for installation of the following size exhaust fan, including making good the wall by plastering and finishing with the matching surface, etc., complete as per the direction of the engineer-in-charge.
-
-
-
225 mm /230 mm sweep
2
237
474
250 mm sweep.
2
188
376
450 mm sweep.
2
490
980
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 400 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
3
624
1872
Supply and installation of following sweep size, 220 V, wall mounted fan along with speed regulator unit for speed control, on the existing wall, including connection, testing, commissioning etc. as required. (Make: Atomberg /Crompton/Havells/Orient/Usha/Bajaj/Almonard)
-
-
-
400 mm sweep
1
3122
3122
Supply, installation, testing and commissioning of surface mounted LED downlighter luminaire in metallic housing, with a minimum system lumen output of 1500 lumen and with a minimum system luminous efficacy of 100 lm/W, Average LED life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing etc. as required.
5
2433
12165
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty of Atomberg/ Usha/ Orient / Havells /Bajaj/Crompton make)
10
3372
33720
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED recessed Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, suitable for recessed mounting, Armstrong/grid/POP/GB ceiling complete with all accessories, diffuser and electronic driver, directly on the ceiling, including connections and earthing etc. as required.
5
3543
17715
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1100 mm (nominal size) with a minimum system lumen output of 2400 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
5
851
4255
Supply, installation, testing, and commissioning of LED bulkhead fittings with IP 66 ingress protection, with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature of 5500K–6500 K, average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser, electronic driver, etc. as required directly on the wall, including connections, etc. as required
2
1654
3308
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 600 mm (nominal size) with a minimum system lumen output of 1000 lumen and with a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
5
618
3090
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
10
256
2560
Double pole
1
656
656
Triple pole
1
1007
1007
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
5
13
65
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
(Note : DB should be suitable for RCCB/RCBO as incomer.)
-
-
-
8 way , Double door
1
2573
2573
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, complete with testing and commissioning etc. as required
-
-
-
For 8 way, Double door SPN MCBDB
1
832
832
Fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
6 to 16 way, Double door
1
468
468
Providing and laying cement concrete in kerbs, steps and the like at or near ground level excluding the cost of centering, shuttering and finishing.
-
-
-
1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
0.5
8340
4170.43
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)
1
1503
1503.6
Cutting road and making good the same including supply of extra quantities of materials i.e. aggregate, moorum screening, red bajri and labour required.
-
-
-
Bituminous portion
0.5
5032
2516.13
The road crossings of power cable through trenchless boring. Trenchless boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground utilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required.
The rates for moling, as indicated are inclusive of excavation of pits, backfilling, compaction and restoration of the pits to original condition.
Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department.
The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 150 mm dia DWC HDPE / G.I. /PVC
10
651
6510
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 205 mm x 255 mm x 112 mm on a pole, complete with the following accessories fixed in, and two sets of 25 mm x 3 mm GI clamps with G. I. bolts, nuts and washers, for mounting on a street light pole, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 100 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 2500G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
2
3813
7626
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with the required front area (but not less than 1.55 sqm) and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 400 amps, 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC/SMC bus bar supports at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring from busbars to switch gears and up to terminal blocks with suitable sized solid aluminium strips,
-
-
-
the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common aluminium/G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 55.01-55.12 (The drawing will be approved before the fabrication of the panel.)
1.55
31694
49125.7
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
Red Phase indication LED lamps.
1
152
152
Yellow Phase indication LED lamps.
1
152
152
Blue Phase indication LED lamps.
1
246
246
2 Amp SPMCB, BB10020C
1
440
440
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete selector switch - 1 Set.
1
3466
3466
Insulated Tape Wound CTs 400/5 A amps, 15VA withAccuracy class 0.5, 5P10 in existing cubicle panel board including making connections and teting etc,. as required.
3
1912
5736
125 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN1-250C, 100-125 Amp MCCB, 4 Pole, 25kA, CM90642OOLO
5
12426
62130
80 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
9914
9914
320 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
28871
28871
Direct Rotary Handel, DN0 CM97895OOOO for 80 Amp .
1
1211
1211
Direct Rotary Handel, DN0 CM98040OOOO for 125.
4
1287
5148
Direct Rotary Handel, DN0 CM99861OOOO for 320 Amp
1
3053
3053
Supply, installation, testing, and commissioning of a double door type, outdoor type, totally enclosed IP54, dust and vermin proof, powder-coated in an approved Siemens grey shade after 7 tank treatment processes, pedestal-mounted cubical type LT panel. The panel with the required front area (but not less than 1.55 sqm) and a depth of 300 mm, fabricated in a compartmentalised design from 2 mm CRCA sheet steel with fully openable front and back doors with locking arrangements and required gaskets, and a tapered top (roof). The feeder pillar should be complete with 400 amps, 4 strip aluminium bus bars with heat-shrinkable coloured sleeves and including DMC/SMC bus bar supports at required intervals, control terminals and suitably sized terminal blocks for incoming and outgoing cables, including providing interconnections / power wiring from busbars to switch gears and up to terminal blocks with suitable sized solid aluminium strips, the wiring for the control circuit shall be carried out using 1.5 sq.mm flexible copper cable, the entire panel shall have one common aluminium/G.I. bar of size 25 mm x 5 mm at the rear with 2 earth studs/terminals, including detachable cable gland plates made of 3 mm thick CRCA sheet, suitable for operation on a 433 volt, 50 Hz, 3 phase, 4 wire A. C. supply system complete as required. and suitable size M.V. Danger Boards shall be fixed on the panel. The feeder pillar should be complete with a mounting frame made of 50 mm x 50 mm x 6 mm angle iron with 900 mm long legs. The 4 legs of the feeder pillar shall be erected on a suitable size of 1:3:6 cement concrete (1:3:6 cement; 3 sand; 6 graded stones of 20 mm size) pedestal having 900mm of depth (600mm below ground and 300mm above ground). The feeder pillar shall have provision to accommodate the following switch gears, as mentioned below in Item No. 57.01-57.13
(The drawing will be approved before the fabrication of the panel.)
1.55
31694
49125.7
Providing and fixing the following switch gears, metres, and accessories on the existing cubicle panel board, including drilling holes in the panel, making connections, testing and commissioning, etc. as required.
-
-
-
Red Phase indication LED lamps.
1
152
152
Yellow Phase indication LED lamps.
1
152
152
Blue Phase indication LED lamps.
1
246
246
2 Amp SPMCB, BB10020C
1
440
440
Multi-function meter (MFM) with to read V, I, Hz, PF,KW & KWH complete selector switch - 1 Set.
1
3466
3466
Insulated Tape Wound CTs 400/5 A amps, 15VA withAccuracy class 0.5, 5P10 in existing cubicle panel board including making connections and teting etc,. as required.
3
1912
5736
125 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN1-250C, 100-125 Amp MCCB, 4 Pole, 25kA, CM90642OOLO
3
12426
37278
160 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN1-250C, 100-125 Amp MCCB, 4 Pole, 25kA, CM90642OOLO
1
19050
19050
80 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
9914
9914
320 Amp 4 pole, 25, kA (Ics=Icu) at 433 V Short CKt. Current rating and should be Thermal Magnetic Release, Adjustable overload settings: 0.8 - 1.0 x In Adjustable short-circuit settings: 6 - 10 x In - 1No. DN0-100C, 25-32 Amp MCCB, 4 Pole, 25kA, CM91712OOEOOG
1
28871
28871
Direct Rotary Handel, DN0 CM97895OOOO for 80 Amp .
1
1211
1211
Direct Rotary Handel, DN0 CM98040OOOO for 125. 160
4
1287
5148
Direct Rotary Handel, DN0 CM99861OOOO for 320 Amp
1
3053
3053
Providing and fixing 315 Amp, 415 Volt, AC 23A , Frame 3 Type Changeover with sheet steel enclosure including installing it on wall complete with making connections, complete etc. as required.
1
21918
21918
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Three Pole
1
1007
1007
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single Pole
6
256
1536
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclo sure with cover plate having locking arrangement and wa tering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.
4
7472
29888
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
30
706
21180
Providing & Fixing 25mmx5mm GI strip on surface or in reccess for connections etc. as required.
10
244
2440
Dismantling of the existing switch accessories like switches, sockets, and MCBs, etc., as required.
5
4
20
Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store.
5
9
45
Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required.
5
24
120
Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store.
5
60
300
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
221
1105
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
5
168
840
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
5
71
355
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Above 25 mm conduits.
5
7
35.25
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
Up to 25 mm conduit.
5
3
17.65
Less credit for the unserviciable items dismantled items during execution of the work.
-
-
-
Assorted MCB TP AND TP&N & OTHER SWITCHGEAR
4
-10
-40
Assorted PIANO Type Switches
20
-
-10
Assorted PIANO Type Sockets
20
-1
-30
Assorted Bell push/PIANO Type
10
-
-5
Assorted Call bell buzzer single phase
10
-1
-10
Assorted Brass batten/ angle holder/Brass Bracket
10
-2
-20
Assorted Fan regulator/resistance type
10
-
-5
Assorted Telephone Socket outlet
10
-
-5
Assorted T.V. Socket outlet
10
-
-5
Assorted Capacitor, 3.15/2.50/2.25 mfd
10
-
-5
Assorted 1200/1400 mm sweep ceiling Fan with blades
10
-350
-3500
Assorted Fresh Air FAN 200/250
10
-150
-1500
Assorted Exhaust fan 300/380/450
10
-250
-2500
Assorted Wall Bracket Fittings
10
-5
-50
Assorted fluorescent Light Fittings
10
-5
-50
Assorted Bulk Head Fittings
10
-15
-150
less credit for the dismantled Copper wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-150
-1500
less credit for the dismantled aluminium wire wires from light points/ circuit/ submain/power circuit wiring,.
10
-35
-350
Assorted metal switch box.
20
-2
-40
Assorted MCB DB SPN with out MCBs
20
-15
-300
Assorted MCB DB TPN with out MCBs
20
-20
-400
Assorted MCB SP
20
-5
-100
HRC Fuse Switch/100/200/80 Amp
10
-100
-1000
MS Structure for Panel
200
-30
-6000
Panel with old Starter System( Credit With Face Area)
1.5
-5000
-7500
Assorted MCB DP
20
-7
-140
Assorted MCB TP AND TP&N
4
-10
-40
ADD labour cess @1 % on DSR 2022 (Elect.) amount Rs. 195677/-
1
1956
1956.77
Add Difference in GST of (18 &12 %) by MF 0.0633 on DSR Elect i.e Rs. 195677/- (DSR) + 1956.77 (L/Cess) = 197633.77/-
1
12510
12510.22
Less COST INDEX on DSR(E) @ -2.73 % i.e Rs. 195677/- (DSR) + 1956.77 (L/Cess) + Rs. 12510.22 (GST difference) = Rs. 210143.99/-
1
-5736
-5736.93
Correction factor on existing items of DSR @ 0.973 as per CPWD office Memorandum 158/SE (TAS)/GST/2024/02-E DATED 8-8-2024 (U) i.e. Rs. 195677/- (DSR) + 1956.77(L/Cess) + Rs. 12510.22 (GST difference) + 9317.96/- (DSR Civil) - 5736.93 (Correction) = Rs. 213725.02
1
-5770
-5770.58
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements