National Security Guard Tender
If you want to inquire about any e-tender the Haryana government has posted, Bidassist gives a one-stop solution i.e. being a registered bidder you will find every eprocurement Haryana tender on BidAssist.There is no need to enter all the details on the website of etender.up.nic.in as BidAssist helps you find the specific Haryana etender you're looking for. Read further to learn how to search and bid for etender Haryana.
Costs
EMD
₹ 1,45,183Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NSG_818469_1Bid Award Id
ViewTender No
16/CS/2024-25/NSGTender Authority
National Security Guard ViewPurchaser Address
-Website
http://https://www.nsg.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
1:1.5:3 (1 Cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
15.75
131368
8340.85
1:5:10 (1 cement : 5 coarse sand (zone-Ill) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources)
15.75
102667
6518.6
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-Ill) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
60.24
45137
749.3
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :
-
-
-
1:1.5:3(1 cement: 1.5 coarse sand (zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
8.02
72546
9045.75
Centering and shuttering including strutting, propping etc. and removal of form for
-
-
-
Lintels, beams, plinth beams, girders, bressumers and cantilevers
10
7364
736.4
Columns, Pillars, Piers, Abutments, Posts and Struts
35
33645
961.3
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.
-
-
-
Thermo-Mechanically Treated bars of grade Fe-500D or more.
721.8
77846
107.85
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:
-
-
-
Cement mortar 1:6(1 cement :6 coarse sand)
2
14264
7132.25
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :
-
-
-
Cement mortar 1:6(1 cement : 6 coarse sand)
8.26
75215
9105.95
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level.
-
-
-
Cement mortar 1:4(1 cement :4 coarse sand)
3.3
3708
1123.8
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.
-
-
-
Granite stone slab of colour black, Cherry/Ruby red
-
-
-
Area of slab upto 0.50 sqnn
35.68
193153
5413.5
Area of slab over 0.50 sqm
2
10272
5136.3
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:
-
-
-
35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
32.21
77067
2392.65
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :
-
-
-
35 mm thick shutters
-
-
-
with ISI marked M.S. pressed butt hinges bright finished of required size
-
-
-
Kiln seasoned and chemically treated hollock wood
15.12
54419
3599.2
Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete:
-
-
-
25 mm dia
130
68321
525.55
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.
-
-
-
With 12 mm mild steel U beading
100
93920
939.2
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :
-
-
-
300x16 mm
42
12736
303.25
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
250x10 mm
42
4836
115.15
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :
-
-
-
100 mm
84
5002
59.55
Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame.
78.7
44933
570.95
Providing and fixing to existing door frames.
-
-
-
30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/ Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856, complete as per direction of Engineer-in-charge.
32.13
144229
4488.95
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer.
-
-
-
Using flats 30x6 mm for diagonal braces and central cross piece
4.62
25704
5563.75
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment).
-
-
-
Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
108
14153
131.05
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
-
-
-
Hot finished welded type tubes
2553.89
496476
194.4
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.
-
-
-
In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
250
43150
172.6
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with:
-
-
-
4.0 mm thick glass panes
50
53232
1064.65
Providing and laying vitrified floor tiles in diferent sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.
-
-
-
Size of Tile 600x600 mm
304.05
472326
1553.45
Providing and laying Vitrified tiles in diferent sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete.
-
-
-
Size of Tile 600x600 mm
25.58
41517
1623.05
Providing gola 75x75 mm in cement concrete 1:2:4(1 cement :2 coarse sand : 4 stone aggregate 10 mm and down gauge), including finishing with cement mortar 1:3 (1 cement: 3 fine sand) as per standard design :
-
-
-
In 75x75 mm deep chase
5
1525
305.15
Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS :5382, leaving 10 mm gap for thermal expansion.
-
-
-
Coupler
-
-
-
110 mm
5
680
136.15
Single tee with door
-
-
-
110x110x110 mm
7
1639
234.15
Single tee without door
-
-
-
110x110x110 mm
7
1549
221.35
Bend 87.5°
-
-
-
110 mm bend
10
1503
150.35
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.
-
-
-
110 mm
10
3713
371.3
Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'S or 'L' hooks, bolts & nuts 8 mm dia. G.I plain/bitumen washers complete but excluding the cost of purlins, rafers, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866.The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
-
-
-
2 mm thick flat
18
22421
1245.65
Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
596.73
440774
738.65
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete :
-
-
-
Ridges plain (500- 600mm)
44
23423
532.35
Flashings/ Aprons.( Upto 600 mm)
76
36905
485.6
12 mm cement plaster of mix:
-
-
-
1:6 (1 cement: 6 coarse sand)
500
171825
343.65
15 mm cement plaster on rough side of single or half brick wall of mix:
-
-
-
1:6(1 cement: 6 coarse sand)
500
197675
395.35
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)
1400
224840
160.6
Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.
-
-
-
On steel work
200
48350
241.75
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :
-
-
-
Two or more coats on new work
200
31180
155.9
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.
400
62420
156.05
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete
700
13825
19.75
Finishing walls with Acrylic Smooth exterior paint of required shade:
-
-
-
Old work (Two or more coat applied @ 1.67 Itr/ 10 sqm) on existing cement paint surface
700
84525
120.75
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.
-
-
-
With cement mortar 1:4 (1cement: 4 coarse sand)
50
28025
560.5
Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.
4
1735
433.75
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge.
-
-
-
Orissa pattern W.C Pan of size 580x440 mm
6
26872
4478.75
Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge.
115.9
399
3.45
Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineer-in-Charge. (a) Internal Work- Exposed on wall
60
195
3.25
Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.
-
-
-
Nominal concrete 1:3:6 or richer mix (including equivalent design mix)
5
12171
2434.25
Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge.
3
10653
3551.25
Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.
-
-
-
In cement mortar
4.09
8426
2060.2
Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
60
22032
367.2
Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :
-
-
-
Of area 3 sq. metres and below
30
4305
143.5
Dismantling steel work manually/ by mechanical means in built up sections without dismembering and stacking within 50 metres lead as per direction of Engineer-in-charge.
150
577
3.85
Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.
115.9
30881
266.45
Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of:
-
-
-
G.S. Sheet
30.25
4989
164.95
Asbestos Cement sheet
304
23499
77.3
Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead :
-
-
-
100 mm dia pipe
50
3900
78
Dismantling of flushing cistern of all types (C.I./PVC/Vitrious China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead.
3
336
112.05
Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.
1000
54650
54.65
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :
-
-
-
W.C. pan with ISI marked white solid plastic seat and lid
1
6515
6515.55
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:
-
-
-
White Vitreous China Flat back wash basin size 450x 300 mm with single 15 mm C.P. brass pillar tap
4
6054
1513.6
Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete.
-
-
-
10 litre capacity - White
6
7143
1190.65
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
-
-
-
Semi rigid pipe
-
-
-
40 mm dia
15
1750
116.7
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :
-
-
-
Rectangular shape 453x357 mm
4
5447
1361.8
Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.
4
4334
1083.5
Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.
4
927
231.95
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall
-
-
-
25 mm nominal dia Pipes
50
20077
401.55
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.
-
-
-
15 mm nominal dia Pipes
80
39824
497.8
20 mm nominal dia Pipes
60
32256
537.6
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :
-
-
-
25 mm nominal bore
3
1867
622.4
20 mm nominal bore
3
1619
539.95
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :
-
-
-
20 mm nominal bore
5
2312
462.5
25 mm nominal bore
4
1856
464.05
Providing and fixing uplasticised PVC connection pipe with brass unions :
-
-
-
45 cm length
-
-
-
15 mm nominal bore
20
1955
97.75
Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :
-
-
-
150 mm diameter
10
2223
222.35
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :
-
-
-
15 mm nominal bore
5
1591
318.35
20 mm nominal bore
5
1734
346.8
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.
4000
44000
11
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :
-
-
-
15 mm nominal bore
10
5068
506.8
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
-
-
-
15 mm nominal bore
10
8207
820.7
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931.
-
-
-
15 mm nominal bore
10
6704
670.45
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931
-
-
-
15 mm nominal bore
10
5743
574.3
Providing and fixing PTMT grating of approved quality and colour.
-
-
-
Circular type
-
-
-
125 mm nominal dia with 25 mm waste hole
10
518
51.85
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design :
-
-
-
Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) :
-
-
-
With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
1
12770
12770.55
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality
-
-
-
L D- 2.5
-
-
-
Rectangular shape 600x450 mm internal dimensions
4
5750
1437.65
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :
-
-
-
For fixed portion
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
336.74
178775
530.9
For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)
-
-
-
Powder coated aluminium (minimum thickness of powder coating 50 micron)
288.14
182810
634.45
Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.
-
-
-
Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side
20
22786
1139.3
Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):
-
-
-
With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)
20
30105
1505.25
Filling the gap in between aluminium frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete.
-
-
-
Upto 5 mm depth and 5 mm width
50
4837
96.75
Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
-
-
-
With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
283.25
524593
1852.05
Credit for MS section like angle, tee, flats, grill etc.
150
-4200
-28
Credit for SCI/CI pipe
150
-4200
-28
Credit for G.I. pipe
150
-6000
-40
Credit for CP fittngs etc
50
-17500
-350
Providing and laying rectified matt finish Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make in all colours, shades and pattern matching with bathroom wall tile concepts, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete.
60
86364
1439.4
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades and pattern (bathroom/kitchen wall tile concept using highlighters etc.) of any size (minimum size 300x600mm or more) as approved by Engineer -in-Charge in kitchen walls, bathroom walls and dados laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints and pointing in white cement mixed with pigment of matching shade complete.
150
237945
1586.3
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white stop cock,spreader,SS tube atc and all fittings complete, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Single half stall urinal with quarter round stop cock with mannual controll system
2
16422
8211.38
Removing and lifting of malba/richer mix concrete in sunken portion, lead up to 50 mtr etc all complete as per direction of EIC.
10
5534
553.41
Providing and Fixing on wall face unplasticidsed Rigid PVC rain water pipes confirming to IS: 13592 Type-B,including jointing with seal ring confirming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes with 6 kg/cmxcm Pressure. 110 mm diameter
50
24400
488
Electrical
-
-
-
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.
-
-
-
Group B
158
186756
1182
Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
400
133600
334
Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 2 Nos 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.
160
85920
537
Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required
-
-
-
2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire
160
37280
233
Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable as earth wire in existing surface/ recessed stee/PVC conduit including dismantling as required.
-
-
-
Group B
28
17836
637
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
3 x 1.5 sq. mm
90
8550
95
6 x 1.5 sq. mm
30
5430
181
9 x 1.5 sq. mm
10
2850
285
3 x 4 sq. mm
150
30900
206
6 x 4 sq. mm
50
19800
396
9 x 4 sq. mm
20
11580
579
2 x 6 sq. mm
10
2160
216
3 x 6 sq. mm
10
3040
304
6 x 6 sq. mm
10
5980
598
Supplying and fixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
20
4460
223
25 mm
10
2560
256
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
95
12160
128
25 mm
200
29000
145
32 mm
30
5520
184
40 mm
5
1140
228
50 mm
5
1420
284
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.
-
-
-
100 mm X 100 mm X 60 mm deep
5
1045
209
150 mm X 150 mm X 60 mm deep
10
3110
311
200 mm X 150 mm X 75 mm deep
10
3630
363
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
-
-
-
5/6 amps switch
34
3502
103
2 way 5/6 amps switch
1
148
148
15/16 amp switch
8
1248
156
3 pin 5/6 amp socket outlet
6
732
122
6 pin 15/16 amp socket outlet
12
2364
197
Bell push
1
140
140
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
39
14391
369
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
30
1200
40
Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc as required.
-
-
-
1 or 2 Module (75mmX75mm)
20
5960
298
3 Module (100mmX75mm)
10
3270
327
4 Module (125mmX75mm)
6
2058
343
6 Module (200mmX75mm)
6
2412
402
8 Module (125mmX125mm)
10
4540
454
12 Module (200mmX150mm)
12
6564
547
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
1
477
477
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
23
13478
586
Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.
28
2436
87
Numbering of ceiling fan/ exhaust fan/ LED fittings as required.
186
10602
57
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.
-
-
-
Upto 450 mm sweep
5
2250
450
Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.
14
2898
207
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.
-
-
-
Group B
24
18072
753
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providng and fixing 2 Nos. 3 pin 5/6 A modular socket outlet and 2 Nos. 5/6 A modular switch, connections etc. as required. (For light plugs to be used in non residential buildings).
29
19720
680
Supplying & fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 16 A modular socket outlet and 16 A/25 A modular SP MCB, "C" curve including connections, painting etc. as required.
10
7910
791
Supplying and fixing PVC batten/ angle holder including connections etc. as required.
24
2640
110
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
8 way, Double door
6
15438
2573
12 way, Double door
6
13890
2315
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)
-
-
-
4 way (4 + 12), Double door
2
8182
4091
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
Single pole
40
10240
256
Single pole and neutral
9
5391
599
Triple pole
2
2014
1007
Triple pole and neutral
2
2456
1228
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
8
104
13
Supplying and fixing following rating, double pole, (single phase and neutral), 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
25 amps
4
8112
2028
40 amps
3
7926
2642
63 amps
1
2722
2722
Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
63 amps
2
5744
2872
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 8 way, Double door SPN MCBDB
6
4992
832
For 10/12 way, Double door SPN MCBDB
6
4860
810
Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required.
-
-
-
For 4 way, Double door TPN MCBDB
2
2160
1080
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench, complete as required.
-
-
-
40 mm dia (OD-40 mm & ID-32 mm nominal)
20
1720
86
63 mm dia (OD-63 mm & ID-51 mm nominal)
9
1143
127
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
40 mm dia (OD-40 mm & ID-32 mm nominal)
150
31050
207
63 mm dia (OD-63 mm & ID-51 mm nominal)
80
19760
247
Supplying and fixing 25 A modular switch on the existing modular plate switch box including connections but excluding modular plate etc. as required.
8
2376
297
Providing and fixing metallic ceiling fan clamps on existing round/square/rectangular truss pipes in ceilings alongwith nut bolt arrangement to fix the clamp securely on to the truss pipe for securing the ceiling fans tightly as per sample approved by engineer-in-charge :
55
26400
480
Providing and fixing following size of fan downrods on existing fan clamps alongwith PVC insulated 3c x 1.5 sq mm [confirming to IS:694] flexible cable in flexible steel conduit including connection, earthing etc as required
-
-
-
900 mm
55
43175
785
Supplying and fixing of following sizes of flexible steel conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
-
-
-
20 mm
10
1400
140
25 mm
50
7750
155
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required
-
-
-
40 amps, DP MCB
1
1193
1193
63 amps, DP MCB
1
1193
1193
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
40 amps, TP&N MCB
1
2283
2283
63 amps, TP&N MCB
2
4566
2283
Supplying and fixing following rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
-
-
-
32 A, Triple pole
1
1660
1660
63 A, Triple pole
1
1660
1660
Providing and fixing following capacity & size, 4-pole 415 V, powder painted metallic bus-bar box , on surface/recess, cable knock-outs for entry/exit, 4-strips of colour coded copper strips in step type arrangement complete with bakelite insulator sheet, powder painted including earthing etc. as required. ( Make: Socomec / Tekson / HPL / Sainik/ Havells)
-
-
-
100 A Bus-bar box of nominal size 36 x 30 x 15 cm
3
16248
5416
Supplying and fixing polycarbonate weatherproof, IP66 outdoor type cable junction box with minimum dimensions of 155 mm x 210 mm x 92 mm on surface or recess, complete with the following accessories fixed in, including connections etc., complete as required. i) Din-rail suitable for fixing the following accessories- 1 Nos. ii) Feedthrough terminals 75 A - 4 Nos with endplate as required. iii) shorting link - 2 Nos.
v) End Clamps - 2 Nos
vi) SP MCB "C" curve, 10KA, 6 A - 1Nos.
v) PVC Cable Gland - 2 Nos Junction box make: (Make Hensel KF 1600G / Legrand / CAPE/ ELM / GEWISS/ SPELSBERG / RITTAL/ EATON/OBO)
Terminal Bock: Connect well/Elmex/ Phoenix/ Wago/ Essen
Cable Gland : Hensel/ Dowells/ Barco/ Connectwell/ Elmex /Eaton/ Legrand
4
10656
2664
Supplying and laying of one number PVC/XLPE insulated and PVC sheathed/XLPE aluminium conductor power cable 1.1 KV grade of following size in the existing RCC/ HUME/ STONEWARE/ METAL/ DWC pipe as required.
-
-
-
2c x 10sqmm
40
10720
268
2c x 16sqmm
62
18538
299
3.5 x 35sqmm
50
28550
571
Supplying, Laying and fixing of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size on wall surface as required.
-
-
-
2C x 10sqmm
33
9141
277
2c x 16sqmm
5
1540
308
3.5 x 35sqmm
5
3260
652
Supplying and Laying of one number aluminium conductor, XLPE Insulated, PVC sheathed, armoured power cable of 1.1 kV grade , confirming to IS : 7098 (Part-1) 1988 of following size in the existing masonry open duct / along pole / loose for connections etc as required.
-
-
-
2C x 10sqmm
5
1285
257
2c x 16sqmm
6
1728
288
3.5 x 35sqmm
5
2650
530
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.
-
-
-
2 X 10 sq. mm (19mm)
8
1928
241
2 X 16 sq. mm (22mm)
4
1024
256
3½ X 35 sq. mm (32mm)
6
2214
369
Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
9
61695
6855
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling etc as required.
80
22960
287
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.
20
14120
706
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
15
3660
244
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.
600
25200
42
The road crossings of power cable through trenchless boring. Trenchless horizontal boring using Manual/ Machine Moling technique at 0.75 metre below the ground level for following size pipes, including survey of under ground tilities, excavation of pits, moling with the hole size not exceeding 20% of the pipe dia, backfilling, compaction and restoration of the pits to original condition etc. as required. The rates for moling, as indicated are inclusive of xcavation of pits, backfilling, compaction and restoration of the pits to original condition. Any damages occurred to other utilities during the Moling operation shall be immediately notified and rectified by the contractor without any cost implication to the Department. The length of the Hole (excluding the sizes of the pits on both ends) shall be considered for the measurement of Moling length. However, intermediate pits will consider in the moling length.
i) Upto 200 mm dia DWC HDPE / G.I. /PVC
20
13380
669
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, down rod upto 30 cm long , 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 8, Air delivery minimum 215 Cum/Min, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (BLDC Ceiling fan with minimum 2 year Warranty)
51
176715
3465
Supplying and installation of PVC Exhaust fan with louver shutter 200 mm sweep in the existing opening, including making good the damage, connection, testing , commissioning etc as required.
(Havells / C&G / Orient / Usha / Almonard)
1
2345
2345
Supplying and installation of 225/ 230 mm sweep, single phase, metallic exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. (Havells Ventil Air or with similar specifications C&G / Orient / Usha / Almonard)
12
28176
2348
Supplying installation testing and commissioning of 400mm sweep wall fan with thermal overload motor protection, delivery rate 85 CMM at 1330 rpm (or better) suitable for operation on 220-240V and 50Hz Ac supply etc required. (Make: Crompton- Hiflo Wave plus/Havells/Orient/Usha/Almonard)
6
17610
2935
Making hole of the required size and shape in brick masonry wall for the installation of an exhaust fan of size 225 mm/230 mm sweep and fixing 230 mm dia PVC pipe conforming to BIS-12818 and making good the wall by plastering, etc., complete as per the direction of the engineer-in-charge
12
1704
142
Making hole of the required size and shape in a brick masonry wall for the installation of exhaust fan of size 250 mm sweep and making good the wall by plastering, etc. complete as per direction of Engineer-in-charge.
1
197
197
Making hole of the required size and shape in a brick masonry wall for the installation of exhaust fan of size 380 mm sweep and making good the wall by plastering, etc. complete as per direction of Engineer-in-charge.
5
2580
516
Supply and fixing of 8 mm thick BWP/marine grade plywood wood board having a circular /rectangular hole to suit the sie of exhaust fan upto 380 mm on wall /window for etc as required including the cost of making hole, nuts and bolts, etc. as required.
10
6430
643
Providing and fixing a metallic louvred shutter suitable for a 300 mm exhaust fan, the louvres should be able to open when the fan is on and close when the fan is turned off, on the existing opening on the wall, etc., as required.
12
9984
832
Providing and fixing a metallic louvred shutter suitable for a 380 mm exhaust fan, the louvres should be able to open when the fan is on and close when the fan is turned off, on the existing opening on the wall, etc., as required.
5
5310
1062
Supply, installation, testing, and commissioning of integrated LED Batten luminaire, 1200 mm (nominal size) with a minimum system lumen output of 4000 lumen and with a minimum system luminous efficacy of 120 lm/W, made of aluminium housing having a colour temperature 5500K - 6500 K, Average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling/wall, including connections, earthing, etc. as required.
70
61740
882
Supply, installation, testing, and commissioning of deep recess mounted warm LED downlighter luminaire [Square/round] complete with aluminium powder coated pressure die cast housing and PC diffuser and electronic driver, with a minimum system lumen output of 1800 lumens and a minimum system luminous efficacy of 100 lm/W, average LED life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser and electronic driver, directly on ceiling, including connections and earthing, etc. as required.
8
19944
2493
Supply, installation, testing, and commissioning of LED bulkhead fittings with IP 66 ingress protection, with a minimum system lumen output of 1000 lumens and a minimum system luminous efficacy of 100 lm/W, made of aluminium housing having a colour temperature of 5500K–6500 K, average life L70B50: 50000 hours, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, diffuser, electronic driver, etc. as required directly on the wall, including connections, etc. as required.
38
65208
1716
Supply, installation, testing and commissioning of 25 watts LED-based post top luminaires, IP 65, with Die-cast aluminium spigot housing and complete with diffuser, LED module, electronic driver and all other accessories, having minimum system luminous efficacy of 95 lm/W, on existing street light pole/gate including connection etc. as required. Make :CORAL (Opal) or RUBY (Clear) of Havells similar in Philips / Havells/ Wipro/ Bajaj
4
30900
7725
Supply, installation, testing, and commissioning of 2 ft. x 2 ft. (nominal size) LED Recess Mounted LED Panel Light, in metallic housing, with a minimum system lumen output of 3960 lumens and a minimum system luminous efficacy of 110 lm/W, colour temperature of 5500K–6500K, average life L70B50: 50000 hours, THD ≤ 10%, suitable for operation on 140-270V, 1Φ, 50Hz AC supply system, complete with all accessories, electronic driver, diffuser, directly on the ceiling, including connections, earthing, etc. as required.
8
40688
5086
Dismantling of the existing recessed switch board of light points/power points, power/light plug points/socket outlet metal boxes of any size, along with phenolic laminated sheet, switches, sockets, etc., making good the damage to match the adjacent surface, etc., as required.
30
2040
68
Dismantling of the existing recessed SPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
8
1296
162
Dismantling of the existing recessed vertical type or horizontal type TPN MCB distribution board of any size along with MCBs and other accessories, including making good the damage to match the adjacent surface, etc., as required.
2
428
214
Dismantling of SPN Industrial type socket outlet alongwith MCB, in sheet steel enclosure including credit for same etc. as required.
8
848
106
Dismantling wires from the following sizes, existing circuit/submain/power wiring conduits, complete as required. The length of the conduit from which the wires are removed will be measured for payment purposes, irrespective of the number of wires in it.
-
-
-
Up to 25 mm conduit.
400
1412
3.53
Above 25 mm conduit.
100
705
7.05
Dismantling of the existing ceiling rose, holder, and wall bracket and depositing the same with the listing of materials in the store.
60
540
9
Dismantling of existing fluorescent fitting from ceiling/ wall including making good the damage to match the adjacent surface, etc., as required.
80
1920
24
Dismantling of the existing ceiling fan/ exhaust fan of any size installed in the building and depositing it in the MMC store.
60
3600
60
less credit for the unserviciable items dismantled items during execution of the work.
-
-
-
Assorted PIANO/modular Type Switches
196
-98
-0.5
Assorted PIANO/modular Type Sockets
30
-45
-1.5
Assorted Bell push/PIANO/modular Type
5
-2
-0.5
Assorted Call bell buzzer single phase
5
-5
-1
Assorted Brass batten/ angle holder/Brass Bracket
50
-100
-2
Assorted Fan regulator/resistance type
73
-36
-0.5
Assorted Telephone Socket outlet
5
-2
-0.5
Assorted T.V. Socket outlet
5
-2
-0.5
Assorted Capacitor, 3.15/2.50/2.25 mfd
73
-36
-0.5
Assorted 1200/1400 mm sweep ceiling Fan with blades
73
-25550
-350
less credit for the dismantled Copper wire wires from light points/ circuit/ submain/power circuit wiring,.
25
-3750
-150
less credit for the dismantled aluminium wire wires from light points/ circuit/ submain/power circuit wiring,.
30
-1050
-35
Assorted metal switch box.
60
-120
-2
Assorted MCB DB SPN with out MCBs
6
-90
-15
Assorted MCB DB TPN with out MCBs
2
-40
-20
Assorted MCB SP
70
-350
-5
Assorted MCB DP
8
-56
-7
Assorted MCB TP AND TP&N
6
-60
-10
Assorted Industrial type sockets
8
-80
-10
Less cost index difference of electrical DSR items 2022 @ (-) 2.73% on Rs. 9,84,764/-
1
-26884
-26884.06
Add 1.0633 multiplying factor for GST on DSR (On electrical items) on Rs. 9,57,879.94
1
60633
60633.8
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements