National Fertilizers Limited Tender

Hardener HY - 840 / K-46

Hardener HY - 850 / K-42

Quartz Sand grade mix No. 10

Epoxy painting with Araldite and Hardners on Concrete / Plastered /Metal surfaces in the All Area of Prilling Tower or any Plant at anyHorizontal / Vertical Locations at all heights and depths with allnecessary useful Tools, scafolding / staging for safe and properexecution of work as per instruction of Engineer-in-Charge.(Payment for cost of Araldite and Hardeners shall be made forseparately vide item No. 1 of Material Part)

A) Araldite GY-250 : Hardner HY - 830 : Hardner HY - 850 =100 PBW : 45 PBW : 15 PBW ( PBW = Parts By Weight)

Two Coat-Ist Coat - Primer-Araldite GY-250 : Hardner HY - 840 =100 PBW : 50 PBW : ( PBW = Parts By Weight)-II nd Coat - Painting -Araldite GY-250 : Hardner HY - 830 : Hardner HY - 850 =100 PBW : 45 PBW : 15 PBW ( PBW = Parts By Weight)

Repairing the damaged concrete / plastered /other surfaces withprimer followed by epoxy Mortar / putty prepared by mixing Araldite,Hardners, Quartz sand, in the areas of Urea Plant, Prill Tower, DMPlant, Bagging Plant or any Plant & at Horizontal / Vertical locationsat all heights and depths with all necessary Useful tools scafolding /staging for safe and proper execution of work as per instruction ofEngineer-in-Charge.(Payment for cost of Araldite, Hardeners and Quartz sand shall bemade for separately vide item No. 1 of Material Part)Araldite GY-250 : Hardner HY - 830 : Hardner HY - 850 :Quartz Sand No. 10100 PBW : 45 PBW :15 PBW : 800 PBW (PBW = Parts By Weight)

Laying 5 mm average thickness ( i.e 3 mm to 7 mm thick) epoxyscreeding with Araldite and Hardners on Concrete / Plastered /surfaces in the areas of DM Plant, or at any other location(s), atHorizontal / Vertical locations at all heights and depths with allnecessary materials ,tools & plants , scafolding /staging, as perenclosed Technical Specifications and special conditions of thecontract and as per following formulations : Primer followerd byScreeding of patches and sealed by seal coat of Epoxy with requiredformulationmade for separately vide item No. 1 of Material Part)Primer Coat :Araldite GY- 250 : Hardner HY - 840 =100 PBW : 50 PBW : (PBW = Parts By Weight)Screeding :Araldite GY-250 : Hardner HY - 830 : Hardner HY - 850 :Quartz Sand No. 10100 PBW : 45 PBW : 15 PBW : 800 PBW ( PBW = Parts By Weight)Final CoatAraldite GY-250 : Hardner HY - 830 : Hardner HY - 850 =Araldite GY-250 : Hardner HY - 830 : Hardner HY - 850 =100 PBW : 45 PBW : 15 PBW ( PBW = Parts By Weight)

Dismantling of existing damaged Epoxy screeding / plaster, oldEpoxy Coating from the Concrete / Plastered / surfaces in thevarious areas of NFL Plant, or at anyother location(s), atHorizontal / Vertical locations at all heights and depths , preparingthe areas to receive fresh treatment, with all necessary tools &tackels , scafolding / staging, including collection of dismentalledmaterials and disposal of the same in disposal yards locatedwithin Factory area as per instruction of Engineer-in-Charge.

Providing and laying Acid Resistant Tile on Floor/Walls/Drains orat any required location in plant area by using 228 mm x 114 mmx 38 mm size Acid Resistant Tile Class-1 conforming to IS: 4860with one priming Coat of epoxy primer with 6 mm or more thickbed of epoxy quartz mortar to make proper slope and painting ofjoints with solvent free epoxy paint as per enclosed technicalspecifications. The rate shall include for surface prepration,dismentailing of existing / damaged floor Providing & Fixing Tilewith mortar and disposal of debris to dump yard in factory area.(Note- All Material for Item no-5 i.e- Acid Resistant Tile, Epoxy Mortar,Quartz Sand and other material etc shall be arrange by Contractor forexecution of said item at is own cost)

Note: (1) GST shall be paid extra as per NIT. (2) Bidders may take care of Clause No. 6.0 of GTC & 1.8.0 of STC while quoting the Rates. (3) Bidders must read all the Clauses of STC and Scope of work before quoting rates.