Directorate Of Urban Local Bodies Tender

Supply, installation, testing and commissioning of 12.5 mtr. High Mast make such as PWD depptt. Haryana/ Municipal Corporation Haryana/ Hareda such as per Hareda (Lellter No. DREA/HAREDA/2019/1222-1226 Dated 28.02.2019) Haryana Govt. Rate Contract High Mast with 3 rope system Manufactured from B.S.E.N. 10025 (steel grade S-355) material in 2 sections hot dip, galvanized inside and outside in single dip, suitable for wind velocity as per 875 part-3 suitable for 12 Nos.Luminaire loading there shall be only one longitudinal weld per section and no circumferential weld. It shall include accessories like lightening arrestor, head frame, suspension system with steel wire rope, double drum winch, galvanized lantern carriage and its control gear, compensating disc. Cable& copper cable for fixture 2.5mmx 2 core, main cable 4mm2 x 6 core will be laid. The mast shall have an internal type power tool mounted in the base compartment and 6Nos. Non integral flood light fitting 2x 250 watt of such as PWD depptt. Haryana/ Municipal Corporation Haryana/ Hareda such as per Hareda (Lellter No. DREA/HAREDA/2019/1222-1226 Dated 28.02.2019) Haryana Govt. Rate Contract with 2 Nos. 250 watt SON-T such as PWD depptt. Haryana/ Municipal Corporation Haryana/ Hareda such as per Hareda (Lellter No. DREA/HAREDA/2019/1222-1226 Dated 28.02.2019) Haryana Govt. Rate Contract with 250 watt HPSV tublar lamp 250 watt(GE make) and control gear box, Twin dome aviation light with one No. 100 watt GIS lamp and construction of suitable shallow foundation with 1:1.5:3 cement concrete for the High Mast considering the safe soil bearing capacity at site as 10T/sqmtr. And 2 mtr. Depth with all material and labour including the cost of one set of foundation nuts and bolts and installation at site with wiring complete in all respect i.e. Entire satisfaction of Engineer-in-charge. Each fitting shall be have independent circuit controlled by individual MCB mounted at the bottom. The high mast fixing shall confirm to the following tech. Specification i. Thickness of the top section/ bottom section= 4mm/min.Top dia= 166mm Bottom dia =410mm. 2. Thickness of Galvanization= top 86 micron(minimum) Bottom- 86 micron(min.)Wt. Of 12.5mtr. High mast = 450-475kg.(appx.). The accessories i.e. rope system , winch drive, tool box, foundation Nut & bolts shall confirm to relevant ISS

S/E of GI pipe laid 1 mtr. below ground level digging and refilling and of the trench completing with jointing with jute and cement etc. xiii) GI pipe 50mm dia flushed.such as PWD depptt. Haryana/ Municipal Corporation Haryana/ Hareda such as per Hareda (Lellter No. DREA/HAREDA/2019/1222-1226 Dated 28.02.2019) Haryana Govt. Rate Contract

Earthing with G.I. earth pipe 4.5 mtr. long and 40mm dia with masonry enclosures on the top etc. as required. HSR 31.22-i)