Directorate Of Urban Local Bodies Tender

Pdg. and fixing 4.00 mm dia G.I. wire on surface or in recess for loop earthing as required.

Supply and erection of insulated conductor with messenger with insulation of high quality in single core 25 sq mm cable.

Supply and Erection of Sheet steel enclosure distribution board i.e. 2 way box

Supply and erection of miniature circuit breaker/isolator 240/415 V in the existing distribution board including making necessary connections. (a) Miniature circuit breakers of 9 K.A. breaking capacity i.e. 6 amp. to 32 amp. Single Pole

Supply and Erection of prestessed cement concrete pole as per IS : 1678-1960 i.e. 9 Meter long 105 mm x 115 mm at top and 105 mm x 315 mm at bottom.

Supply and Erection Hot dip Galvanized octagnal pole of 3mm thickness with base plate including cost of nut and bolts and all accessories as supplied by the manufacture including cost of foundation accessories etc. The foundation bolts as per manufacturer design should be hot dipped galvanized pole complete with door locking arrangement. Terminal plate consisting of 2 Nos. 100A. 4 Pole natural links including connection etc. with/ suitable connecting arrangement for 2 Nos. MCBs kit kat including cost of R.C.C. 1.53 for foundation of size 0.7 M x 0.7 M x 1.8 M with minumum 8 nos. 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200 mm C.C. for fixing thr pole with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of the work. i.e. 9 meter long pole with top dia 70mm and bottom dia 155mm with base plate of size 220x220x16mm.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections . To be laid open for connection to street lights 2 Core 4mm² Aluminium Cable. (To be laid in open/overhead)

Supply and Erection of 11KV Pin Type Insulator as required and desired by the department up to with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work..

Supply and Erection of MS Flat/Angle Iron/Channel iron/MS Clamps etc. as per design as desired by the dept with all labour and material required to complete the job suitable for fixing arrangement of two insulators in all respect upto the entire satisfaction of Engineer-in-Charge of the work..

Supply installation testing and commissioning on Wall/Free Floor mounting dust & vermin proof cubical panel having minimum IP54 degree of protection aesthetically appealing with locaking facility. It should be capable of switch ON and switch OFF on time scheduling as required with the help of contector and time switch. The panel should include 32Amp three pole/ 230V Astronomical time switch and 32Amp three pole contractor and suitable arrangement for HRC fuse and proper connection and conectors. panel should also contain a selector switch for Auto and manual function of panel. The installation of panel should be proper and compete in all respects with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply installation testing and commissioning on Wall/Free Floor mounting dust & vermin proof cubical panel having minimum IP54 degree of protection aesthetically appealing with locaking facility. It should be capable of switch ON and switch OFF on time scheduling as required with the help of contector and time switch. The panel should include 65Amp three pole/ 230V Astronomical time switch and 65Amp three pole contractor and suitable arrangement for HRC fuse and proper connection and conectors. panel should also contain a selector switch for Auto and manual function of panel. The installation of panel should be proper and compete in all respects with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply and Erection M.S. Pipe suitable for Pole and Light. Black Painted Pipe (band 30cm+45cm) dia. 40mm.

Supply and Erection M.S. Clamp suitable for fixing the light at Pole. Black painted Clamp (width 1.25 inches, thickness 4.00 mm, weight 1.2 kg), Nut & Bolt.(3/8” x 3” long)

Supply and Erection of LED street light luminaires complete with 120W LED light fixture competing the technical spacification criteria with corrosion free housing Compete in all respects with making necessary connections etc. with the erection of same on existing pipe/Bracket with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply and Erection of LED street light luminaires complete with 90W LED light fixture competing the technical spacification criteria with corrosion free housing Compete in all respects with making necessary connections etc. with the erection of same on existing pipe/Bracket with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply and Erection of LED street light luminaires complete with 70W LED light fixture competing the technical spacification criteria with corrosion free housing Compete in all respects with making necessary connections etc. with the erection of same on existing pipe/Bracket with all labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work.

Supply and Erection of double arm bracket made of B-Class G.I. pipe of 40 mm dia 1.00 mtr. long of both sides of poles suitable for fixing 2 Nos. street light luminaires with a cap suitable for fixing on top of a pole having 70 mm top dia including all nut and bolt and threads etc. complete in all respect.

Supply and Erection of single arm bracket made of B-Class G.I. pipe of 40 mm dia 1.00 mtr. long suitable for fixing 1 No. street light luminaires with a cap suitable for fixing on top of a pole having 70 mm top dia including all nut and bolt and threads etc. complete in all respect.