Directorate Of Urban Local Bodies Tender

SHOULDER BUILDER DIMENSIONS: - 0.9M (L) x 0.9M (W) x 1.580M (H). Shoulder Builder Equipment made from “B” Class G.I. pipe of different NB.100mmNB made from “B” Class G.I. pipe, and the bottom support of M.S. Round plate of 250 mm diameter and 10mm thickness. The handle movement frame is of 25mm NB made from “B” Class G.I. pipe. The foundation used for fixing is a structure and made from center pipe of G.I. of 80mm NB”B”or “B” class welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angle of 1.2 mm thickness and 20mm x 40mm CRC square pipe of 1.2mm thickness. Closing Caps are made up of high quality Fiber reinforced Plastic material. The pins used are made up of Ø 25 mm of bright material. The bearing used is “6201zz” and “6205zz” permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nut bolts are used for assembly. The cerclips used for assembly is of A 24. The nylon bush is used for handle knob. The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

SIT UP BOARD DOUBLE DIMENSIONS: - 1.76M (L) x 1.14M (W) x 0.66M (H). he Sit up Board double made from “B” Class GI pipe. Center column made from 100mm T NB “B” class G.I. Pipe. The main frame is of 25mm NB made from “B” Class GI pipe. FRP sheet of 3mm thickness is molded on main frame.The remaining frame of the sit up board is of 32mm NB made from “B” class GI pipe. The powder coating is done with Pure Polyester powder Ackzonoble or Berger Paints with 60 to 70 micron thickness. The oundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” f class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

AIR WALKER DIMENSIONS: - 1.72M (L) x 0.63M (W) x 1.75M(H) Sky Walker Equipment made from “B” class G.I. Pipe of different NB. 80mm NB made from “B” Class G.I. Material which is bend at the radius of 250mm. The leg movement frame is of 50 x 50mm x 3mm thick CRC square pipe. Sleeves are made up of 100 mm OD M.S. pipe with thickness 5mm. This results in easy replacement of bearings, bearings used are “6205zz” are permanent lubricated sealed bearing of reputed brand. High tensile steel with galvanized nuts and bolts are used for assembly. The cerclips used for assembly are of A24 type. The powder coating is done with Pure Polyester powder of The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

CROSS TRAINER DIMENSIONS: - 1.32M (L) x 0.6M (W) x 1.75M. (H). Cross trainer equipment made from “B” Class G.I. Pipe of 80NB “B” Class G.I. Pipe with single bend pipe with 250mm radius. of M.S. round plate of Ø250 mm and 10mm thick. The Handle Frame is made up of 25NB “B” Class G.I. Pipe. M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 1.2 mm thickness and 20mm x 40mm CRC square pipes of 1.2mm thickness. To build structure bushes are used which are made from M.S.seamless pipe of 60mm OD. With 5 mm thickness. The footrests are made from casting material of size 130 mm X 310mmX5mm thickness and mounted on M.S. Plate of Size 130mmx310mmx3mm thick Closing Caps are made up of high quality Fiber reinforced Plastic material. Pins used of Diameter 35mm, 25mm, and 17mm are made up from bright material. The Bearings used are of “6007” , “6205” and with 150 x 150 x 5 mm MS plate for nut bolting with stand. Powder coated 40 microns fixed in foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

CHEST PRESS DIMENSIONS: - 2M (L) x 0.71M (W) x 2.15M. (H). Chest press equipment made up of “B” Class G.I. pipe of different NB. NB stands for Nominal Bore Sizes i.e. Internal Diameter of pipe in millimeters The centerpipe is of 100NB made up of “B” Class G.I. pipe. The bottom welded with support of M.S. round plate of Ø250 mm and 10mm thickness. The connecting pipes are made up from 25NB “B” class G.I. pipe. The handle frame is made up from 32NB “B” class G.I. pipe. To build structure bushes are used which are made from MS seamless pipe of 60mm O.D. and 5mm thickness as well as 60mm diameter solid bar bush is used. The foundation used for fixing is a structure and made from center pipe of G.I. of 80 NB “B” class Welded with M.S. round plate of Ø250 mm and 10mm thick. Main pipe supported with 25 mm X 25mm M.S. angles of 3 mm thickness and 20mm x 40mm CRC square pipes of 3mm thickness.The seats and Back rests are fitted on the outer frames are made up of M.S. Sheet of size 330 mm X 300 mmX2mm thickness and deep drawn and pressed in tools and dies to have uniform radius of 20 mm with no sharp edges. Closing Caps are made up of high quality Fiber reinforced Plastic material. Foundation cover Closing Cap is made from FRP Material with 0 The powder coating is done with Pure Polyester powder of ,Ackzonoble or Berger. with 60 to 70 micron thickness foundation cc mixture of 1:1.5:3 minimum size 450*450*600mm . (colour Specified by Engineer-in-charge )

Providing and Fixing of U-Type Chain Swing Two seater Dimensions - 3048 L x 914W x 2438H ( in mm ) Safe play area - 3650 x 2740 ( in mm ) MS pipe(ISI) of 88.9mm o/d (3mm thick) with single curve for U type , two seats with made of self knitted polyester belt of 8mm thick hanging with chain on clip supports with Rotational swinging mechanism ms moulded flange for durability and extra support. Frame to be coated by phosporas with A-R treatment with minimum 40 microns layer of PP quality powder coating Foundation CC Mixture of 1: 1.5: 3 minimum 600mm Deep. (colour Specified by Engineer-in-charge )

Providing and Fixing of See-Saw four seater Dimensions - 2438L x 1524W x 914H ( in mm ) Safe play area - 3048 x 2124 ( in mm ) Frame Structure to be made in round tubular MS pipe(ISI) of 114.3mm (3mm thick) ,88.9mm(3mm) , 31mm (2mm tck), o/d pipe Thikcness 3mm and triangular moulded supports to be joined with Rotational mechanism tube for durability and extra support. Top support to be made in curved shape pipe 31mm and handle to be made by curving pipes from 4 sides MS vertical pipe to be covered by 115mm MS round plate. Seats 4 nos to be made in moulded FRP Material Frame to be coated by phosporas with A-R treatment with minimum 40 microns layer of PP quality powder coating Foundation CC Mixture of 1: 1.5: 3 minimum 300mm Deep.

Providing and laying Product 2 layered, water permeable all weather surface made of structural sprayed polyurethane layer on an in situ polyurethane bonded rubber granulate Sub-base. Thickness 36 mm (30mm SBR Base Layer plus 6mm Top with EPDM Granules) Colour Multi colour from our colour bank .

Double Zig Zag Climber - Area- 8X1.5 mtr, Safe Play Area-10X2.5 mtr, Height- 2.0 mtr, Width 0.6 mtr. Main Frame- 40 NB MS Pip Class B. Spoport- 20 NB MS Pip Class B, Capecity- 4-8 Childerns, Recommonded age- 4-12 fixed in cc foundation mixture of 1:1.5:3 minimium size 450*450*600mm

Classic Sea Saw Area- 8X2X2 feet, Safe Play Area- 11X4X2 feet, Height- 2.0 feet, Seesaw lever-50 NB MS Pip Class B, Main frame- 40 NB MS Pip Class B, Seat- 4mm FRP, Capecity- 4 Children`s, Recommended age- 4-10 fixed in cc foundation mixture of 1:1.5:3 minimium size 450*450*600mm

Army Ladder:- Area- 0.6X3.0 mtr, Safe Play Area- 1.6X4.0 mtr, Height- 2.5 mtr, Main Frame- 65 NB MS Pip Class B, Spoport- 20 NB MS Pip Class B, Capecity- 2-8 Childerns, Recommonded age- 4-10 fixed in cc foundation mixture of 1:1.5:3 minimium size 450*450*600mm

LED post tops Bajaj BGCP 45W LED WW

Supply ans installation of sandstone jali bollard 3.5 ft high. Excluding cost of wiring, light fixture.

Providing and fixing jaguar lighting in sandstone bollards Item code OGB-GRY-LGBL04R301XW, LED Ground Burial 3X1W Warm White inlcuding

Supply and installation of Blue Star 40 Liter Stainless Steel Plain and Cold Water Cooler Model PC480-40 Liter Cooling, 80 Liter Storage complete all respect.

Supplying and installation of Commercial RO System Capacity of 30LPH including 1yr AMC

Providing Philips LED 4` batten light.

CNC cutting on 2mm thik SS Sheet for Park gate letter cutout complete.

Providing and fixing White marble water feature 10ftX10Ft dia and 8 ft high. Inlcuding supply and installation. Cost of connection to water supply and pump not included.

Supply and installation of low height bubblers in shallow water bodies including complete electrical, pumps, plumbing, bubler head etc.